refcounting errors in ZONE_DEVICE pages.
- Peter Xu fixes some userfaultfd test harness instability.
- Various other patches in MM, mainly fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0j6igAKCRDdBJ7gKXxA
jnGxAP99bV39ZtOsoY4OHdZlWU16BUjKuf/cb3bZlC2G849vEwD+OKlij86SG20j
MGJQ6TfULJ8f1dnQDd6wvDfl3FMl7Qc=
=tbdp
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- fix a race which causes page refcounting errors in ZONE_DEVICE pages
(Alistair Popple)
- fix userfaultfd test harness instability (Peter Xu)
- various other patches in MM, mainly fixes
* tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (29 commits)
highmem: fix kmap_to_page() for kmap_local_page() addresses
mm/page_alloc: fix incorrect PGFREE and PGALLOC for high-order page
mm/selftest: uffd: explain the write missing fault check
mm/hugetlb: use hugetlb_pte_stable in migration race check
mm/hugetlb: fix race condition of uffd missing/minor handling
zram: always expose rw_page
LoongArch: update local TLB if PTE entry exists
mm: use update_mmu_tlb() on the second thread
kasan: fix array-bounds warnings in tests
hmm-tests: add test for migrate_device_range()
nouveau/dmem: evict device private memory during release
nouveau/dmem: refactor nouveau_dmem_fault_copy_one()
mm/migrate_device.c: add migrate_device_range()
mm/migrate_device.c: refactor migrate_vma and migrate_deivce_coherent_page()
mm/memremap.c: take a pgmap reference on page allocation
mm: free device private pages have zero refcount
mm/memory.c: fix race when faulting a device private page
mm/damon: use damon_sz_region() in appropriate place
mm/damon: move sz_damon_region to damon_sz_region
lib/test_meminit: add checks for the allocation functions
...
This reverts commit e96e27fc6f.
Jonathan reported that this commit broke this topology, where all the space
available on bus 02 was assigned to the 02:00.0 bridge window, leaving none
for the e1000 device at 02:00.1:
pci 0000:00:04.0: bridge window [mem 0x10200000-0x103fffff] to [bus 02-04]
pci 0000:02:00.0: bridge window [mem 0x10200000-0x103fffff] to [bus 03-04]
pci 0000:02:00.1: BAR 0: failed to assign [mem size 0x00020000]
e1000 0000:02:00.1: can't ioremap BAR 0: [??? 0x00000000 flags 0x0]
Link: https://lore.kernel.org/r/20221014124553.0000696f@huawei.com
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Convert the PDC console to an early console
* Unbreak mmap() of graphics card memory due to PAGE_SPECIAL pgtable flag
* Reduce the size of the alternative tables
* Align stifb graphics card memory size to 4MB
* Spelling fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCY0mnYAAKCRD3ErUQojoP
X1z3AQC204Pq725WM3rgEomIqFjk8QaU2UFcNQ74a52V3AUiiQD8C0DFmWDbssUv
ZE5uC+ySlNd1hLkL3QYxrbbwuL+y+Q0=
=YvFZ
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Fixes:
- When we added basic vDSO support in kernel 5.18 we introduced a bug
which prevented a mmap() of graphic card memory. This is because we
used the DMB (data memory break trap bit) page flag as special-bit,
but missed to clear that bit when loading the TLB.
- Graphics card memory size was not correctly aligned
- Spelling fixes (from Colin Ian King)
Enhancements:
- PDC console (which uses firmware calls) now rewritten as early
console
- Reduced size of alternative tables"
* tag 'parisc-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix spelling mistake "mis-match" -> "mismatch" in eisa driver
parisc: Fix userspace graphics card breakage due to pgtable special bit
parisc: fbdev/stifb: Align graphics memory size to 4MB
parisc: Convert PDC console to an early console
parisc: Reduce kernel size by packing alternative tables
- Generate a change uevent on unsolicited device end I/O interrupt for z/VM
unit record devices supported by the vmur driver. This event can be used to
automatically trigger processing of files as they arrive in the z/VM reader.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmNJnhgACgkQjYWKoQLX
FBiTLAf+NJ2nky15kmDq3ZMc4lRzSqhq8wd4Y+PBjIDZykQGonufwY03ppQuHoxW
6c9/gG1MS4fBlaOqP7a17v381kytnGjKXufDvIQy/O5ZZkLQk9LFFqJYVWU39O1x
VqFMvUgNhnS6yH2ERQWm18nUgFTz1nCAVobf4uzJgHbrWHn5Tq/idcoCnlzSfOTW
h8iRlsChKM8f4WrKsSuK7lmlD7mm25Z7jePnIb436nd/HqsmSj6MDuB6Ap4EY5qp
6IMdSClMi3FBrlT+9kvn9vM2yCUFiMMBxd7nLGaeAlL2vXjW+uuHAgn4SqoLl6MH
SWAEGWDY+V7NHy+XolzjE/fpOdD9Ww==
=4O+h
-----END PGP SIGNATURE-----
Merge tag 's390-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Generate a change uevent on unsolicited device end I/O interrupt for
z/VM unit record devices supported by the vmur driver. This event can
be used to automatically trigger processing of files as they arrive
in the z/VM reader.
* tag 's390-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vmur: generate uevent on unsolicited device end
s390/vmur: remove unnecessary BUG statement
* A handful of DT updates for the PolarFire SOC.
* A fix to correct the handling of write-only mappings.
* m{vetndor,arcd,imp}id is now in /proc/cpuinfo
* The SiFive L2 cache controller support has been refactored to also
support L3 caches.
There's also a handful of fixes, cleanups and improvements throughout
the tree.
-----BEGIN PGP SIGNATURE-----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=iCOr
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- DT updates for the PolarFire SOC
- a fix to correct the handling of write-only mappings
- m{vetndor,arcd,imp}id is now in /proc/cpuinfo
- the SiFive L2 cache controller support has been refactored to also
support L3 caches
- misc fixes, cleanups and improvements throughout the tree
* tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
MAINTAINERS: add RISC-V's patchwork
RISC-V: Make port I/O string accessors actually work
riscv: enable software resend of irqs
RISC-V: Re-enable counter access from userspace
riscv: vdso: fix NULL deference in vdso_join_timens() when vfork
riscv: Add cache information in AUX vector
soc: sifive: ccache: define the macro for the register shifts
soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes
soc: sifive: ccache: reduce printing on init
soc: sifive: ccache: determine the cache level from dts
soc: sifive: ccache: Rename SiFive L2 cache to Composable cache.
dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache
riscv: check for kernel config option in t-head memory types errata
riscv: use BIT() marco for cpufeature probing
riscv: use BIT() macros in t-head errata init
riscv: drop some idefs from CMO initialization
riscv: cleanup svpbmt cpufeature probing
riscv: Pass -mno-relax only on lld < 15.0.0
RISC-V: Avoid dereferening NULL regs in die()
dt-bindings: riscv: add new riscv,isa strings for emulators
...
- Fix 32-bit syscall wrappers with 64-bit arguments of unaligned register-pairs.
Notably this broke ftruncate64 & pread/write64, which can lead to file corruption.
- Fix lost interrupts when returning to soft-masked context on 64-bit.
- Fix build failure when CONFIG_DTL=n.
Thanks to: Nicholas Piggin, Jason A. Donenfeld, Guenter Roeck, Arnd Bergmann, Sachin Sant.
-----BEGIN PGP SIGNATURE-----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=B+7s
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix 32-bit syscall wrappers with 64-bit arguments of unaligned
register-pairs. Notably this broke ftruncate64 & pread/write64, which
can lead to file corruption.
- Fix lost interrupts when returning to soft-masked context on 64-bit.
- Fix build failure when CONFIG_DTL=n.
Thanks to Nicholas Piggin, Jason A. Donenfeld, Guenter Roeck, Arnd
Bergmann, and Sachin Sant.
* tag 'powerpc-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Fix CONFIG_DTL=n build
powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked context
powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs
After commit 8799c0be89 ("drm/amd/display: Fix vblank refcount in vrr
transition"), a build with CONFIG_DEBUG_FS=n is broken due to a
misplaced brace, along the lines of:
In file included from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_trace.h:39,
from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:41:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: At top level:
./include/drm/drm_atomic.h:864:9: error: expected identifier or ‘(’ before ‘for’
864 | for ((__i) = 0; \
| ^~~
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8317:9: note: in expansion of macro ‘for_each_new_crtc_in_state’
8317 | for_each_new_crtc_in_state(state, crtc, new_crtc_state, j)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Move the brace within the #ifdef so that the file can be built with or
without CONFIG_DEBUG_FS.
Fixes: 8799c0be89 ("drm/amd/display: Fix vblank refcount in vrr transition")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are several spelling mistakes in kernel error messages. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Remove unnecessary NULL check of oparam->cifs_sb when parsing symlink
error response as it's already set by all smb2_open_file() callers and
deferenced earlier.
This fixes below report:
fs/cifs/smb2file.c:126 smb2_open_file()
warn: variable dereferenced before check 'oparms->cifs_sb' (see line 112)
Link: https://lore.kernel.org/r/Y0kt42j2tdpYakRu@kili
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the kernel exposes a new perf_event_attr field in a format attr, perf
will return an error stating the specified PMU can't be found. For
example, a format attr with 'config3:0-63' causes an error as config3 is
unknown to perf. This causes a compatibility issue between a newer
kernel with older perf tool.
Before this change with a kernel adding 'config3' I get:
$ perf record -e arm_spe// -- true
event syntax error: 'arm_spe//'
\___ Cannot find PMU `arm_spe'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list
available events
After this change, I get:
$ perf record -e arm_spe// -- true
WARNING: 'arm_spe_0' format 'inv_event_filter' requires 'perf_event_attr::config3' which is not supported by this version of perf!
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.091 MB perf.data ]
To support unknown configN formats, rework the YACC implementation to
pass any config[0-9]+ format to perf_pmu__new_format() to handle with a
warning.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220914-arm-perf-tool-spe1-2-v2-v4-1-83c098e6212e@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
$ perf list metricgroups
gives
List of pre-defined events (to be used in -e):
Metric Groups:
Backend
Bad
BadSpec
But that's incorrect of course because metric groups or metrics can only
be specified with -M. So fix the message to say -e or -M
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221004192634.998984-1-ak@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -C/--cpu option was maily for report but it also affected record as
it ate the option. So users needed to use "--" after perf mem record to
pass the info to the perf record properly.
Check if this option is set for record, and pass it to the actual perf
record.
Before)
$ sudo perf --debug perf-event-open mem record -C 0 2>&1 | grep -a sys_perf_event_open
...
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 4
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 7
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 8
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 11
...
After)
$ sudo perf --debug perf-event-open mem record -C 0 2>&1 | grep -a sys_perf_event_open
...
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 4
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221004200211.1444521-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its just for that __packed define, so use it expanded as __attribute__((packed)),
like the other files in /usr/include do.
This was problem was preventing building the libperf examples on ALT
Linux and Fedora 35, fix it.
Reported-by: Vitaly Chikunov <vt@altlinux.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitry Levin <ldv@altlinux.org
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/Y0lnpl2Ix7VljVDc@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Convert list of clang-tidy arguments to a list for ease of adding to
them and extending them as required.
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The musl implementation of getopt stops looking for options after the
first non-option argument. Put the options before the non-option
argument so environments using musl can still build the kernel and
modules.
Fixes: f73edc8951 ("kbuild: unify two modpost invocations")
Link: https://git.musl-libc.org/cgit/musl/tree/src/misc/getopt.c?h=dc9285ad1dc19349c407072cc48ba70dab86de45#n44
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This test commonly fails on Arm Juno because the instruction interval
is large enough to miss generating any samples for Perf in system-wide
mode.
Fix this by lowering the interval until a comfortable number of Perf
instructions are generated. The test is still quick to run because only
a small amount of trace is gathered.
Before:
sudo ./perf test coresight -vvv
...
Recording trace with system wide mode
Looking at perf.data file for dumping branch samples:
Looking at perf.data file for reporting branch samples:
Looking at perf.data file for instruction samples:
CoreSight system wide testing: FAIL
...
After:
sudo ./perf test coresight -vvv
...
Recording trace with system wide mode
Looking at perf.data file for dumping branch samples:
Looking at perf.data file for reporting branch samples:
Looking at perf.data file for instruction samples:
CoreSight system wide testing: PASS
...
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20221005140508.1537277-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The recent change in the cgroup will break the backward compatiblity in
the BPF program. It should support both old and new kernels using BPF
CO-RE technique.
Like the task_struct->__state handling in the offcpu analysis, we can
check the field name in the cgroup struct.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: bpf@vger.kernel.org
Cc: cgroups@vger.kernel.org
Cc: zefan li <lizefan.x@bytedance.com>
Link: http://lore.kernel.org/lkml/20221011052808.282394-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit df24e1783e ("parisc: Add vDSO support") introduced the vDSO
support, for which a _PAGE_SPECIAL page table flag was needed. Since we
wanted to keep every page table entry in 32-bits, this patch re-used the
existing - but yet unused - _PAGE_DMB flag (which triggers a hardware break
if a page is accessed) to store the special bit.
But when graphics card memory is mmapped into userspace, the kernel uses
vm_iomap_memory() which sets the the special flag. So, with the DMB bit
set, every access to the graphics memory now triggered a hardware
exception and segfaulted the userspace program.
Fix this breakage by dropping the DMB bit when writing the page
protection bits to the CPU TLB.
In addition this patch adds a small optimization: if huge pages aren't
configured (which is at least the case for 32-bit kernels), then the
special bit is stored in the hpage (HUGE PAGE) bit instead. That way we
can skip to reset the DMB bit.
Fixes: df24e1783e ("parisc: Add vDSO support")
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Helge Deller <deller@gmx.de>
Independend of the current graphics resolution, adjust the reported
graphics card memory size to the next 4MB boundary.
This fixes the fbtest program which expects a naturally aligned size.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
-----BEGIN PGP SIGNATURE-----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=kxra
-----END PGP SIGNATURE-----
Merge tag 'block-6.1-2022-10-13' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
"Fixes that ended up landing later than the initial block pull request.
Nothing really major in here:
- NVMe pull request via Christoph:
- add NVME_QUIRK_BOGUS_NID for Lexar NM760 (Abhijit)
- add NVME_QUIRK_NO_DEEPEST_PS to avoid the deepest sleep state
on ZHITAI TiPro5000 SSDs (Xi Ruoyao)
- fix possible hang caused during ctrl deletion (Sagi Grimberg)
- fix possible hang in live ns resize with ANA access (Sagi
Grimberg)
- Proactively avoid a sign extension issue with the queue flags
(Brian)
- Regression fix for hidden disks (Christoph)
- Update OPAL maintainers entry (Jonathan)
- blk-wbt regression initialization fix (Yu)"
* tag 'block-6.1-2022-10-13' of git://git.kernel.dk/linux:
nvme-multipath: fix possible hang in live ns resize with ANA access
nvme-pci: avoid the deepest sleep state on ZHITAI TiPro5000 SSDs
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM760
nvme-tcp: fix possible hang caused during ctrl deletion
nvme-rdma: fix possible hang caused during ctrl deletion
block: fix leaking minors of hidden disks
block: avoid sign extend problem with default queue flags mask
blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init()
block: Remove the repeat word 'can'
MAINTAINERS: Update SED-Opal Maintainers
-----BEGIN PGP SIGNATURE-----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=0dSL
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.1-2022-10-13' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"A collection of fixes that ended up either being later than the
initial pull, or dependent on multiple branches (6.0-late being one of
them) and hence deferred purposely. This contains:
- Cleanup fixes for the single submitter late 6.0 change, which we
pushed to 6.1 to keep the 6.0 changes small (Dylan, Pavel)
- Fix for IORING_OP_CONNECT not handling -EINPROGRESS correctly (me)
- Ensure that the zc sendmsg variant gets audited correctly (me)
- Regression fix from this merge window where kiocb_end_write()
doesn't always gets called, which can cause issues with fs freezing
(me)
- Registered files SCM handling fix (Pavel)
- Regression fix for big sqe dumping in fdinfo (Pavel)
- Registered buffers accounting fix (Pavel)
- Remove leftover notification structures, we killed them off late in
6.0 (Pavel)
- Minor optimizations (Pavel)
- Cosmetic variable shadowing fix (Stefan)"
* tag 'io_uring-6.1-2022-10-13' of git://git.kernel.dk/linux:
io_uring/rw: ensure kiocb_end_write() is always called
io_uring: fix fdinfo sqe offsets calculation
io_uring: local variable rw shadows outer variable in io_write
io_uring/opdef: remove 'audit_skip' from SENDMSG_ZC
io_uring: optimise locking for local tw with submit_wait
io_uring: remove redundant memory barrier in io_req_local_work_add
io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT
io_uring: remove notif leftovers
io_uring: correct pinned_vm accounting
io_uring/af_unix: defer registered files gc to io_uring release
io_uring: limit registration w/ SINGLE_ISSUER
io_uring: remove io_register_submitter
io_uring: simplify __io_uring_add_tctx_node
The RISC-V patchwork instance on kernel.org has had some necromancy
performed on it & will be used going forward. The statuses that are
intended to be used are:
- New: No action has been taken yet
- Under Review: The maintainer is waiting for review comments from others
- Changes Requested: Either the maintainer or a reviewer requested
changes in the patch. The patch author is expected to submit a new
version
- Superseded: There's a new version of the patch available
- Not Applicable: The patch is not intended for the RISC-V tree
- Accepted: The patch has been applied
- Rejected: The patch has been rejected, with reasons stated in an
email
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221011160744.2167025-1-conor@kernel.org/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Compiler warnings：
drivers/rtc/rtc-rv3028.c: In function 'rv3028_param_set':
drivers/rtc/rtc-rv3028.c:559:20: warning: statement will never be executed [-Wswitch-unreachable]
559 | u8 mode;
| ^~~~
drivers/rtc/rtc-rv3028.c: In function 'rv3028_param_get':
drivers/rtc/rtc-rv3028.c:526:21: warning: statement will never be executed [-Wswitch-unreachable]
526 | u32 value;
| ^~~~~
Fix it by moving the variable declaration to the beginning of the function.
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-rtc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Ke Sun <sunke@kylinos.cn>
Link: https://lore.kernel.org/r/20221008071321.1799971-1-sunke@kylinos.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Because acpi_install_fixed_event_handler() enables the event
automatically on success, it is incorrect to call it before the
handler routine passed to it is ready to handle events.
Unfortunately, the rtc-cmos driver does exactly the incorrect thing
by calling cmos_wake_setup(), which passes rtc_handler() to
acpi_install_fixed_event_handler(), before cmos_do_probe(), because
rtc_handler() uses dev_get_drvdata() to get to the cmos object
pointer and the driver data pointer is only populated in
cmos_do_probe().
This leads to a NULL pointer dereference in rtc_handler() on boot
if the RTC fixed event happens to be active at the init time.
To address this issue, change the initialization ordering of the
driver so that cmos_wake_setup() is always called after a successful
cmos_do_probe() call.
While at it, change cmos_pnp_probe() to call cmos_do_probe() after
the initial if () statement used for computing the IRQ argument to
be passed to cmos_do_probe() which is cleaner than calling it in
each branch of that if () (local variable "irq" can be of type int,
because it is passed to that function as an argument of type int).
Note that commit 6492fed7d8 ("rtc: rtc-cmos: Do not check
ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number
of systems, because previously it only affected systems with
ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that
commit.
Fixes: 6492fed7d8 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0")
Fixes: a474aaedac ("rtc-cmos: move wake setup from ACPI glue into RTC driver")
Link: https://lore.kernel.org/linux-acpi/20221010141630.zfzi7mk7zvnmclzy@techsingularity.net/
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/5629262.DvuYhMxLoT@kreacher
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fix port I/O string accessors such as `insb', `outsb', etc. which use
the physical PCI port I/O address rather than the corresponding memory
mapping to get at the requested location, which in turn breaks at least
accesses made by our parport driver to a PCIe parallel port such as:
PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20
parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
causing a memory access fault:
Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008
Oops [#1]
Modules linked in:
CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23
Hardware name: SiFive HiFive Unmatched A00 (DT)
epc : parport_pc_fifo_write_block_pio+0x266/0x416
ra : parport_pc_fifo_write_block_pio+0xb4/0x416
epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60
gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000
t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0
s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000
a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb
a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000
s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50
s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000
s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000
s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930
t5 : 0000000000001000 t6 : 0000000000040000
status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f
[<ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200
[<ffffffff8053bbc0>] parport_write+0x46/0xf8
[<ffffffff8050530e>] lp_write+0x158/0x2d2
[<ffffffff80185716>] vfs_write+0x8e/0x2c2
[<ffffffff80185a74>] ksys_write+0x52/0xc2
[<ffffffff80185af2>] sys_write+0xe/0x16
[<ffffffff80003770>] ret_from_syscall+0x0/0x2
---[ end trace 0000000000000000 ]---
For simplicity address the problem by adding PCI_IOBASE to the physical
address requested in the respective wrapper macros only, observing that
the raw accessors such as `__insb', `__outsb', etc. are not supposed to
be used other than by said macros. Remove the cast to `long' that is no
longer needed on `addr' now that it is used as an offset from PCI_IOBASE
and add parentheses around `addr' needed for predictable evaluation in
macro expansion. No need to make said adjustments in separate changes
given that current code is gravely broken and does not ever work.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: fab957c11e ("RISC-V: Atomic and Locking Code")
Cc: stable@vger.kernel.org # v4.15+
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209220223080.29493@angie.orcam.me.uk
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
I'm merging this in as a single commit as it's a dependency for some
other work.
* commit '3baca1a4d490484fcd555413f1fec85b2e071912':
RISC-V: Add mvendorid, marchid, and mimpid to /proc/cpuinfo output
Commit 2139619bca ("riscv: mmap with PROT_WRITE but no PROT_READ is
invalid") made mmap() reject mappings with only PROT_WRITE set in an
attempt to fix an observed inconsistency in behavior when attempting
to read from a PROT_WRITE-only mapping. The root cause of this behavior
was actually that while RISC-V's protection_map maps VM_WRITE to
readable PTE permissions (since write-only PTEs are considered reserved
by the privileged spec), the page fault handler considered loads from
VM_WRITE-only VMAs illegal accesses. Fix the underlying cause by
handling faults in VM_WRITE-only VMAs (patch 1) and then re-enable
use of mmap(PROT_WRITE) (patch 2), making RISC-V's behavior consistent
with all other architectures that don't support write-only PTEs.
* remotes/palmer/riscv-wonly:
riscv: Allow PROT_WRITE-only mmap()
riscv: Make VM_WRITE imply VM_READ
Link: https://lore.kernel.org/r/20220915193702.2201018-1-abrestic@rivosinc.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- Fixes for Mediatek MT6370 binding
- Merge the DT overlay maintainer entry to the main entry as Pantelis is
not active and Frank is taking a step back
-----BEGIN PGP SIGNATURE-----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=YnES
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fixes for Mediatek MT6370 binding
- Merge the DT overlay maintainer entry to the main entry as Pantelis
is not active and Frank is taking a step back
* tag 'devicetree-fixes-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
MAINTAINERS: of: collapse overlay entry into main device tree entry
dt-bindings: mfd: mt6370: fix the interrupt order of the charger in the example
dt-bindings: leds: mt6370: Fix MT6370 LED indicator DT warning
The PLIC specification does not describe the interrupt pendings bits as
read-write, only that they "can be read". To allow for retriggering of
interrupts (and the use of the irq debugfs interface) enable
HARDIRQS_SW_RESEND for RISC-V.
Link: https://github.com/riscv/riscv-plic-spec/blob/master/riscv-plic.adoc#interrupt-pending-bits
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Tested-by: Palmer Dabbelt <palmer@rivosinc.com> # on QEMU
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20220729111116.259146-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Zong Li <zong.li@sifive.com> says:
Since composable cache may be L3 cache if private L2 cache exists, we
should use its original name "composable cache" to prevent confusion.
This patchset contains the modification which is related to ccache, such
as DT binding and EDAC driver.
* b4-shazam-merge:
riscv: Add cache information in AUX vector
soc: sifive: ccache: define the macro for the register shifts
soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes
soc: sifive: ccache: reduce printing on init
soc: sifive: ccache: determine the cache level from dts
soc: sifive: ccache: Rename SiFive L2 cache to Composable cache.
dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache
Link: https://lore.kernel.org/r/20220913061817.22564-1-zong.li@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
There are no standard CSR registers to provide cache information, the
way for RISC-V is to get this information from DT. sysconf syscall
could use them to get information of cache through AUX vector.
The result of 'getconf -a|grep -i cache' as follows:
LEVEL1_ICACHE_SIZE 32768
LEVEL1_ICACHE_ASSOC 2
LEVEL1_ICACHE_LINESIZE 64
LEVEL1_DCACHE_SIZE 32768
LEVEL1_DCACHE_ASSOC 4
LEVEL1_DCACHE_LINESIZE 64
LEVEL2_CACHE_SIZE 524288
LEVEL2_CACHE_ASSOC 8
LEVEL2_CACHE_LINESIZE 64
LEVEL3_CACHE_SIZE 4194304
LEVEL3_CACHE_ASSOC 16
LEVEL3_CACHE_LINESIZE 64
LEVEL4_CACHE_SIZE 0
LEVEL4_CACHE_ASSOC 0
LEVEL4_CACHE_LINESIZE 0
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Suggested-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220913061817.22564-8-zong.li@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Define the macro for the register shifts, it could make the code be
more readable
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220913061817.22564-7-zong.li@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Use the pr_fmt() macro to prefix all the output with "CCACHE:"
to avoid having to write it out each time, or make a large diff
when the next change comes along.
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220913061817.22564-6-zong.li@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The driver prints out 6 lines on startup, which can easily be redcued
to two lines without losing any information.
Note, to make the types work better, uint64_t has been replaced with
ULL to make the unsigned long long match the format in the print
statement.
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220913061817.22564-5-zong.li@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Composable cache could be L2 or L3 cache, use 'cache-level' property of
device node to determine the level.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220913061817.22564-4-zong.li@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Since composable cache may be L3 cache if there is a L2 cache, we should
use its original name composable cache to prevent confusion.
There are some new lines were generated due to adding the compatible
"sifive,ccache0" into ID table and indent requirement.
The sifive L2 has been renamed to sifive CCACHE, EDAC driver needs to
apply the change as well.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Co-developed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220913061817.22564-3-zong.li@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Since composable cache may be L3 cache if private L2 cache exists, we
should use its original name Composable cache to prevent confusion.
Signed-off-by: Zong Li <zong.li@sifive.com>
Suggested-by: Conor Dooley <conor.dooley@microchip.com>
Suggested-by: Ben Dooks <ben.dooks@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220913061817.22564-2-zong.li@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
catching the Chinese translation up with the front-page rework.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmNIPyAPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y6UMH/2ZLziHH0jQkoBAIhxyUzU3ZfXLlq5Xqo6vS
oBYfJlYLClY/dmfTc3HAI6UhhJLGTcTNDaC1H4YQdgeP6RVJruFThOYF9WgW0FFl
SgsBKhTbi3dpfdzjID8bJM7ytkbIvV4voNh52J9L1TA3z/CPxKSiXCScFAH/o12t
E+CMjtmgi2P8w3kqgX59FMavp3W8M8HsT6u/wVoKb+zXjjqXGFYEXTjjKUxufRf6
QWkaQGb0PHq9+2hAhgF4vdy4tWB9lr7r2ENZ8YKUkYUYfv5KGAqt39J7A4rC+g7w
4Rvzznd0BJv3nuZ4rdxom7cOJ77i3lmWSJ65FoDHNeQ/8VBNuZc=
=UpLC
-----END PGP SIGNATURE-----
Merge tag 'docs-6.1-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of relatively simple documentation fixes, plus a set of
patches catching the Chinese translation up with the front-page
rework"
* tag 'docs-6.1-2' of git://git.lwn.net/linux:
Documentation: rtla: Correct command line example
docs/zh_CN: add a man-pages link to zh_CN/index.rst
docs/zh_CN: Rewrite the Chinese translation front page
docs/zh_CN: add zh_CN/arch.rst
docs/zh_CN: promote the title of zh_CN/process/index.rst
docs/zh_CN: Update the translation of page_owner to 6.0-rc7
docs/zh_CN: Update the translation of ksm to 6.0-rc7
docs/howto: Replace abundoned URL of gmane.org
Documentation: ubifs: Fix compression idiom
Documentation/mm/page_owner.rst: delete frequently changing experimental data
docs/zh_CN: Fix build warning
docs: ftrace: Correct access mode
Current release - regressions:
- Revert "net/sched: taprio: make qdisc_leaf() see
the per-netdev-queue pfifo child qdiscs", it may cause crashes
when the qdisc is reconfigured
- inet: ping: fix splat due to packet allocation refactoring in inet
- tcp: clean up kernel listener's reqsk in inet_twsk_purge(),
fix UAF due to races when per-netns hash table is used
Current release - new code bugs:
- eth: adin1110: check in netdev_event that netdev belongs to driver
- fixes for PTR_ERR() vs NULL bugs in driver code, from Dan and co.
Previous releases - regressions:
- ipv4: handle attempt to delete multipath route when fib_info
contains an nh reference, avoid oob access
- wifi: fix handful of bugs in the new Multi-BSSID code
- wifi: mt76: fix rate reporting / throughput regression on mt7915
and newer, fix checksum offload
- wifi: iwlwifi: mvm: fix double list_add at
iwl_mvm_mac_wake_tx_queue (other cases)
- wifi: mac80211: do not drop packets smaller than the LLC-SNAP
header on fast-rx
Previous releases - always broken:
- ieee802154: don't warn zero-sized raw_sendmsg()
- ipv6: ping: fix wrong checksum for large frames
- mctp: prevent double key removal and unref
- tcp/udp: fix memory leaks and races around IPV6_ADDRFORM
- hv_netvsc: fix race between VF offering and VF association message
Misc:
- remove -Warray-bounds silencing in the drivers, compilers fixed
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=AyqG
-----END PGP SIGNATURE-----
Merge tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, and wifi.
Current release - regressions:
- Revert "net/sched: taprio: make qdisc_leaf() see the
per-netdev-queue pfifo child qdiscs", it may cause crashes when the
qdisc is reconfigured
- inet: ping: fix splat due to packet allocation refactoring in inet
- tcp: clean up kernel listener's reqsk in inet_twsk_purge(), fix UAF
due to races when per-netns hash table is used
Current release - new code bugs:
- eth: adin1110: check in netdev_event that netdev belongs to driver
- fixes for PTR_ERR() vs NULL bugs in driver code, from Dan and co.
Previous releases - regressions:
- ipv4: handle attempt to delete multipath route when fib_info
contains an nh reference, avoid oob access
- wifi: fix handful of bugs in the new Multi-BSSID code
- wifi: mt76: fix rate reporting / throughput regression on mt7915
and newer, fix checksum offload
- wifi: iwlwifi: mvm: fix double list_add at
iwl_mvm_mac_wake_tx_queue (other cases)
- wifi: mac80211: do not drop packets smaller than the LLC-SNAP
header on fast-rx
Previous releases - always broken:
- ieee802154: don't warn zero-sized raw_sendmsg()
- ipv6: ping: fix wrong checksum for large frames
- mctp: prevent double key removal and unref
- tcp/udp: fix memory leaks and races around IPV6_ADDRFORM
- hv_netvsc: fix race between VF offering and VF association message
Misc:
- remove -Warray-bounds silencing in the drivers, compilers fixed"
* tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
sunhme: fix an IS_ERR() vs NULL check in probe
net: marvell: prestera: fix a couple NULL vs IS_ERR() checks
kcm: avoid potential race in kcm_tx_work
tcp: Clean up kernel listener's reqsk in inet_twsk_purge()
net: phy: micrel: Fixes FIELD_GET assertion
openvswitch: add nf_ct_is_confirmed check before assigning the helper
tcp: Fix data races around icsk->icsk_af_ops.
ipv6: Fix data races around sk->sk_prot.
tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct().
udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM).
tcp/udp: Fix memory leak in ipv6_renew_options().
mctp: prevent double key removal and unref
selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1
netfilter: rpfilter/fib: Populate flowic_l3mdev field
selftests: netfilter: Test reverse path filtering
net/mlx5: Make ASO poll CQ usable in atomic context
tcp: cdg: allow tcp_cdg_release() to be called multiple times
inet: ping: fix recent breakage
ipv6: ping: fix wrong checksum for large frames
net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused ports
...
Fix a regression in virtio pci on power.
Add a reviewer for ifcvf.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNIFSAPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpwMsH/iSBZ8pswU+nnB/vD8MMypt1l3GCA9BmVfOF
8+wD5683ugx2YgJXowY0MCWhhKkwJBp6T22dS+PMHE0pvtW6Ent4IySceeBlnsTs
PypeTuGMlb/XmGiefBI4cEhGFQ/ug48UJ3NTkH08r+EAaZO8SZ1ltluln7RQJcgR
mwghMF97wWsM4UQjbcBz18tuvPcGY6+7X5xi+BIbhFDMkKyRYWU9VZlzxQnXRN42
qcxrMQ4me9IUxiuIsjwsqfTXgKqb+2esTiWJa3Au2BO1qRCfgqVjxUNEpmk0F+CF
4V7o0p5N47VC2LR3OlTWf05J3Aq+sf33itzQ66H8aId3fJP69Tk=
=kGLQ
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
- Fix a regression in virtio pci on power
- Add a reviewer for ifcvf
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/ifcvf: add reviewer
virtio_pci: use irq to detect interrupt support
- Found that the synthetic events were using strlen/strscpy() on values
that could have come from userspace, and that is bad.
Consolidate the string logic of kprobe and eprobe and extend it to
the synthetic events to safely process string addresses.
- Clean up content of text dump in ftrace_bug() where the output does not
make char reads into signed and sign extending the byte output.
- Fix some kernel docs in the ring buffer code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY0c6GBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpDNAQCuw9YTeNMU4zxFqBg4/JCbfpnWQGj4
Qdl2u3WtEvTzrgEA85Q01swCYRKdrGPCrFemZ3lm6PGzpGruh+BfD4qRMwk=
=F5kK
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Found that the synthetic events were using strlen/strscpy() on values
that could have come from userspace, and that is bad.
Consolidate the string logic of kprobe and eprobe and extend it to
the synthetic events to safely process string addresses.
- Clean up content of text dump in ftrace_bug() where the output does
not make char reads into signed and sign extending the byte output.
- Fix some kernel docs in the ring buffer code.
* tag 'trace-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix reading strings from synthetic events
tracing: Add "(fault)" name injection to kernel probes
tracing: Move duplicate code of trace_kprobe/eprobe.c into header
ring-buffer: Fix kernel-doc
ftrace: Fix char print issue in print_ip_ins()
noteworthy one being some additional wakeups in cap handling code, and
a messenger cleanup.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmNINMwTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi5UeB/0ZzxdhZarepRYdOw4K+hHmCWYjlrEi
Aw91gfS9DmzXfLyV42/6kxhKGEmVH4Wpz/mAIfMcLaLJZxI9GspVZZuofK6XPJUY
eGqllxXgbgvCqnX9puCfw4RTrEJkt/y6e0/6EhAhjArDNyEylHcApONbEsvHLB+L
IjYEJRuDDNqBnacMjn0iqI2F3zpyu6DkuJNWLxfbGhnWWsj8LaxXVgLtBeePuoIN
udVZiNxiJAldDGc99r0xX5gicjyihBRiomjnz6FO6F459CtrPE/qdx6TNUUt63N3
Lt55JDCM8qJeA8ffblZrhNnT2iefcEuqRcSwSdLbQxW/l6y23O4drx+N
=l/PT
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.1-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"A quiet round this time: several assorted filesystem fixes, the most
noteworthy one being some additional wakeups in cap handling code, and
a messenger cleanup"
* tag 'ceph-for-6.1-rc1' of https://github.com/ceph/ceph-client:
ceph: remove Sage's git tree from documentation
ceph: fix incorrectly showing the .snap size for stat
ceph: fail the open_by_handle_at() if the dentry is being unlinked
ceph: increment i_version when doing a setattr with caps
ceph: Use kcalloc for allocating multiple elements
ceph: no need to wait for transition RDCACHE|RD -> RD
ceph: fail the request if the peer MDS doesn't support getvxattr op
ceph: wake up the waiters if any new caps comes
libceph: drop last_piece flag from ceph_msg_data_cursor
