Since the bindings have been controversial, and we follow the DT stable ABI
rule, we shouldn't let a driver with a DT binding that might change slip
through in a stable release.
Remove the compatibles to make sure the driver will not probe and no-one
will start using the binding currently implemented. This commit will
obviously need to be reverted in due time.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pieter Jansen van Vuuren says:
====================
nfp: fix layer calculation and flow dissector use
Previously when calculating the supported key layers MPLS, IPv4/6
TTL and TOS were not considered. Formerly flow dissectors were referenced
without first checking that they are in use and correctly populated by TC.
Additionally this patch set fixes the incorrect use of mask field for vlan
matching.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously the vlan tci field was incorrectly exact matched. This patch
fixes this by using the flow dissector to populate the vlan tci field.
Fixes: 5571e8c9f2 ("nfp: extend flower matching capabilities")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously when calculating the supported key layers MPLS, IPv4/6
TTL and TOS were not considered. This patch checks that the TTL and
TOS fields are masked out before offloading. Additionally this patch
checks that MPLS packets are correctly handled, by not offloading them.
Fixes: af9d842c13 ("nfp: extend flower add flow offload")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously flow dissectors were referenced without first checking that
they are in use and correctly populated by TC. This patch fixes this by
checking each flow dissector key before referencing them.
Fixes: 5571e8c9f2 ("nfp: extend flower matching capabilities")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault says:
====================
l2tp: fix some l2tp_tunnel_find() issues in l2tp_netlink
Since l2tp_tunnel_find() doesn't take a reference on the tunnel it
returns, its users are almost guaranteed to be racy.
This series defines l2tp_tunnel_get() which can be used as a safe
replacement, and converts some of l2tp_tunnel_find() users in the
l2tp_netlink module.
Other users often combine this issue with other more or less subtle
races. They will be fixed incrementally in followup series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use l2tp_tunnel_get() to retrieve tunnel, so that it can't go away on
us. Otherwise l2tp_tunnel_destruct() might release the last reference
count concurrently, thus freeing the tunnel while we're using it.
Fixes: 309795f4be ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use l2tp_tunnel_get() instead of l2tp_tunnel_find() so that we get
a reference on the tunnel, preventing l2tp_tunnel_destruct() from
freeing it from under us.
Also move l2tp_tunnel_get() below nlmsg_new() so that we only take
the reference when needed.
Fixes: 309795f4be ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to make sure the tunnel is not going to be destroyed by
l2tp_tunnel_destruct() concurrently.
Fixes: 309795f4be ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_nl_cmd_tunnel_delete() needs to take a reference on the tunnel, to
prevent it from being concurrently freed by l2tp_tunnel_destruct().
Fixes: 309795f4be ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_tunnel_find() doesn't take a reference on the returned tunnel.
Therefore, it's unsafe to use it because the returned tunnel can go
away on us anytime.
Fix this by defining l2tp_tunnel_get(), which works like
l2tp_tunnel_find(), but takes a reference on the returned tunnel.
Caller then has to drop this reference using l2tp_tunnel_dec_refcount().
As l2tp_tunnel_dec_refcount() needs to be moved to l2tp_core.h, let's
simplify the patch and not move the L2TP_REFCNT_DEBUG part. This code
has been broken (not even compiling) in May 2012 by
commit a4ca44fa57 ("net: l2tp: Standardize logging styles")
and fixed more than two years later by
commit 29abe2fda5 ("l2tp: fix missing line continuation"). So it
doesn't appear to be used by anyone.
Same thing for l2tp_tunnel_free(); instead of moving it to l2tp_core.h,
let's just simplify things and call kfree_rcu() directly in
l2tp_tunnel_dec_refcount(). Extra assertions and debugging code
provided by l2tp_tunnel_free() didn't help catching any of the
reference counting and socket handling issues found while working on
this series.
Fixes: 309795f4be ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sessions must be fully initialised before calling
l2tp_session_add_to_tunnel(). Otherwise, there's a short time frame
where partially initialised sessions can be accessed by external users.
Fixes: dbdbc73b44 ("l2tp: fix duplicate session creation")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mac address is only retrieved from h/w when using PPv2.1. Otherwise
the variable holding it is still checked and used if it contains a valid
value. As the variable isn't initialized to an invalid mac address
value, we end up with random mac addresses which can be the same for all
the ports handled by this PPv2 driver.
Fixes this by initializing the h/w mac address variable to {0}, which is
an invalid mac address value. This way the random assignation fallback
is called and all ports end up with their own addresses.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Fixes: 2697582144 ("net: mvpp2: handle misc PPv2.1/PPv2.2 differences")
Signed-off-by: David S. Miller <davem@davemloft.net>
The u-blox TOBY-L4 is a LTE Advanced (Cat 6) module with HSPA+ and 2G
fallback.
Unlike the TOBY-L2, this module has one single USB layout and exposes
several TTYs for control and a NCM interface for data. Connecting this
module may be done just by activating the desired PDP context with
'AT+CGACT=1,<cid>' and then running DHCP on the NCM interface.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: David S. Miller <davem@davemloft.net>
Noticed that busy_poll_stop() also invoke the drivers napi->poll()
function pointer, but didn't have an associated call to trace_napi_poll()
like all other call sites.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=cE+t
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming
Pull c6x tweaks from Mark Salter.
* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
c6x: Convert to using %pOF instead of full_name
c6x: defconfig: Cleanup from old Kconfig options
User-modified input settings no longer survive a suspend/resume cycle.
Starting with 4.12, the touchpad is reinitialized on every reconnect
because the hardware appears to be different. This can be reproduced
by running the following as root:
echo -n reconnect >/sys/devices/platform/i8042/serio1/drvctl
A line like the following will show up in dmesg:
[30378.295794] psmouse serio1: synaptics: hardware appears to be
different: id(149271-149271), model(114865-114865),
caps(d047b3-d047b1), ext(b40000-b40000).
Note the single bit difference in caps: bit 1 (SYN_CAP_MULTIFINGER).
This happens because we modify our stored copy of the device info
capabilities when we enable advanced gesture mode but this change is
not reflected in the actual hardware capabilities.
It worked in the past because synaptics_query_hardware used to modify
the stored synaptics_device_info struct instead of filling in a new
one, as it does now.
Fix it by no longer faking the SYN_CAP_MULTIFINGER bit when setting
advanced gesture mode. This necessitated a small refactoring.
Fixes: 6c53694fb2 ("Input: synaptics - split device info into a separate structure")
Signed-off-by: Anthony Martin <ality@pbrane.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ido reported that reading the log page on his systems fails,
so quirk it as it won't support ZBC or security protocols.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Remove the command payloads that do not have an associated libnvdimm
ioctl. I.e. remove the payloads that would only ever be carried in the
ND_CMD_CALL envelope. This prevents userspace from growing unnecessary
dependencies on this kernel header when userspace already has everything
it needs to craft and send these commands.
Cc: Jerry Hoemann <jerry.hoemann@hpe.com>
Reported-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When using the block layer in single queue mode, get_request()
returns ERR_PTR(-EAGAIN) if the queue is dying and the REQ_NOWAIT
flag has been passed to get_request(). Avoid that the kernel
reports soft lockup complaints in this case due to continuous
requeuing activity.
Fixes: 7083abbbf ("dm mpath: avoid that path removal can trigger an infinite loop")
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Using the same rate limiting state for different kinds of messages
is wrong because this can cause a high frequency message to suppress
a report of a low frequency message. Hence use a unique rate limiting
state per message type.
Fixes: 71a16736a1 ("dm: use local printk ratelimit")
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Retry requests instead of failing them if an out-of-memory error occurs
or the block driver below dm-mpath is busy. This restores the v4.12
behavior of noretry_error(), namely that -ENOMEM results in a retry.
Fixes: 2a842acab1 ("block: introduce new block status code type")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Since the discussion is not settled yet for the EMAC, and that the release
in getting really close, let's revert the changes for now, and we'll
reintroduce them later.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Since the discussion is not settled yet for the EMAC, and that the release
in getting really close, let's revert the changes for now, and we'll
reintroduce them later.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This binding still doesn't please everyone, and we're getting far too
close from the release to allow it to reach a stable version.
Let's remove it until the discussion settles down.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The memory reserved to dump the ID of the xfrm state includes a padding
byte in struct xfrm_usersa_id added by the compiler for alignment. To
prevent the heap info leak, memset(0) the sa_id before filling it.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Fixes: d51d081d65 ("[IPSEC]: Sync series - user")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The memory reserved to dump the expired xfrm state includes padding
bytes in struct xfrm_user_expire added by the compiler for alignment. To
prevent the heap info leak, memset(0) the remainder of the struct.
Initializing the whole structure isn't needed as copy_to_user_state()
already takes care of clearing the padding bytes within the 'state'
member.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The memory reserved to dump the ID of the xfrm state includes a padding
byte in struct xfrm_usersa_id added by the compiler for alignment. To
prevent the heap info leak, memset(0) the whole struct before filling
it.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Fixes: 0603eac0d6 ("[IPSEC]: Add XFRMA_SA/XFRMA_POLICY for delete notification")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The memory reserved to dump the xfrm offload state includes padding
bytes of struct xfrm_user_offload added by the compiler for alignment.
Add an explicit memset(0) before filling the buffer to avoid the heap
info leak.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Another fix, this time in common IOMMU sysfs code
- In the conversion from the old iommu sysfs-code to the
iommu_device_register interface, I missed to update the
release path for the struct device associated with an IOMMU.
It freed the 'struct device', which was a pointer before, but
is now embedded in another struct. Freeing from the middle of
allocated memory had all kinds of nasty side effects when an
IOMMU was unplugged. Unfortunatly nobody unplugged and IOMMU
until now, so this was not discovered earlier. The fix is to
make the 'struct device' a pointer again.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=/lXQ
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fix from Joerg Roedel:
"Another fix, this time in common IOMMU sysfs code.
In the conversion from the old iommu sysfs-code to the
iommu_device_register interface, I missed to update the release path
for the struct device associated with an IOMMU. It freed the 'struct
device', which was a pointer before, but is now embedded in another
struct.
Freeing from the middle of allocated memory had all kinds of nasty
side effects when an IOMMU was unplugged. Unfortunatly nobody
unplugged and IOMMU until now, so this was not discovered earlier. The
fix is to make the 'struct device' a pointer again"
* tag 'iommu-fixes-v4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix wrong freeing of iommu_device->dev
Here is a single misc driver fix for 4.13-rc7. It resolves a reported
problem in the Android binder driver due to previous patches in 4.13-rc.
It's been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWaJyTQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3GgCgi/suT2Mqfun8Ohmz9i4fMwjJ7UwAn2s3XxeH
3b+zwqeZD1+zB/w6hZ2v
=9B01
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is a single misc driver fix for 4.13-rc7. It resolves a reported
problem in the Android binder driver due to previous patches in
4.13-rc.
It's been in linux-next with no reported issues"
* tag 'char-misc-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
ANDROID: binder: fix proc->tsk check.
Here are few small staging driver fixes, and some more IIO driver fixes
for 4.13-rc7. Nothing major, just resolutions for some reported
problems.
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWaJy4A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynWcACgxpL4f0LeykFayPprtrciey5OOGoAnAhfG7Lq
LCuaIj8AtUVfwoWXVwBA
=RSsO
-----END PGP SIGNATURE-----
Merge tag 'staging-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/iio fixes from Greg KH:
"Here are few small staging driver fixes, and some more IIO driver
fixes for 4.13-rc7. Nothing major, just resolutions for some reported
problems.
All of these have been in linux-next with no reported problems"
* tag 'staging-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: magnetometer: st_magn: remove ihl property for LSM303AGR
iio: magnetometer: st_magn: fix status register address for LSM303AGR
iio: hid-sensor-trigger: Fix the race with user space powering up sensors
iio: trigger: stm32-timer: fix get trigger mode
iio: imu: adis16480: Fix acceleration scale factor for adis16480
PATCH] iio: Fix some documentation warnings
staging: rtl8188eu: add RNX-N150NUB support
Revert "staging: fsl-mc: be consistent when checking strcmp() return"
iio: adc: stm32: fix common clock rate
iio: adc: ina219: Avoid underflow for sleeping time
iio: trigger: stm32-timer: add enable attribute
iio: trigger: stm32-timer: fix get/set down count direction
iio: trigger: stm32-timer: fix write_raw return value
iio: trigger: stm32-timer: fix quadrature mode get routine
iio: bmp280: properly initialize device for humidity reading
transport, improperly bringing down the link if SPADs are corrupted, and
an out-of-order issue regarding link negotiation and data passing.
-----BEGIN PGP SIGNATURE-----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=qmzC
-----END PGP SIGNATURE-----
Merge tag 'ntb-4.13-bugfixes' of git://github.com/jonmason/ntb
Pull NTB fixes from Jon Mason:
"NTB bug fixes to address an incorrect ntb_mw_count reference in the
NTB transport, improperly bringing down the link if SPADs are
corrupted, and an out-of-order issue regarding link negotiation and
data passing"
* tag 'ntb-4.13-bugfixes' of git://github.com/jonmason/ntb:
ntb: ntb_test: ensure the link is up before trying to configure the mws
ntb: transport shouldn't disable link due to bogus values in SPADs
ntb: use correct mw_count function in ntb_tool and ntb_transport
The "lock_page_killable()" function waits for exclusive access to the
page lock bit using the WQ_FLAG_EXCLUSIVE bit in the waitqueue entry
set.
That means that if it gets woken up, other waiters may have been
skipped.
That, in turn, means that if it sees the page being unlocked, it *must*
take that lock and return success, even if a lethal signal is also
pending.
So instead of checking for lethal signals first, we need to check for
them after we've checked the actual bit that we were waiting for. Even
if that might then delay the killing of the process.
This matches the order of the old "wait_on_bit_lock()" infrastructure
that the page locking used to use (and is still used in a few other
areas).
Note that if we still return an error after having unsuccessfully tried
to acquire the page lock, that is ok: that means that some other thread
was able to get ahead of us and lock the page, and when that other
thread then unlocks the page, the wakeup event will be repeated. So any
other pending waiters will now get properly woken up.
Fixes: 6290602709 ("mm: add PageWaiters indicating tasks are waiting for a page bit")
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tim Chen and Kan Liang have been battling a customer load that shows
extremely long page wakeup lists. The cause seems to be constant NUMA
migration of a hot page that is shared across a lot of threads, but the
actual root cause for the exact behavior has not been found.
Tim has a patch that batches the wait list traversal at wakeup time, so
that we at least don't get long uninterruptible cases where we traverse
and wake up thousands of processes and get nasty latency spikes. That
is likely 4.14 material, but we're still discussing the page waitqueue
specific parts of it.
In the meantime, I've tried to look at making the page wait queues less
expensive, and failing miserably. If you have thousands of threads
waiting for the same page, it will be painful. We'll need to try to
figure out the NUMA balancing issue some day, in addition to avoiding
the excessive spinlock hold times.
That said, having tried to rewrite the page wait queues, I can at least
fix up some of the braindamage in the current situation. In particular:
(a) we don't want to continue walking the page wait list if the bit
we're waiting for already got set again (which seems to be one of
the patterns of the bad load). That makes no progress and just
causes pointless cache pollution chasing the pointers.
(b) we don't want to put the non-locking waiters always on the front of
the queue, and the locking waiters always on the back. Not only is
that unfair, it means that we wake up thousands of reading threads
that will just end up being blocked by the writer later anyway.
Also add a comment about the layout of 'struct wait_page_key' - there is
an external user of it in the cachefiles code that means that it has to
match the layout of 'struct wait_bit_key' in the two first members. It
so happens to match, because 'struct page *' and 'unsigned long *' end
up having the same values simply because the page flags are the first
member in struct page.
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Christopher Lameter <cl@linux.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have a MAX_LFS_FILESIZE macro that is meant to be filled in by
filesystems (and other IO targets) that know they are 64-bit clean and
don't have any 32-bit limits in their IO path.
It turns out that our 32-bit value for that limit was bogus. On 32-bit,
the VM layer is limited by the page cache to only 32-bit index values,
but our logic for that was confusing and actually wrong. We used to
define that value to
(((loff_t)PAGE_SIZE << (BITS_PER_LONG-1))-1)
which is actually odd in several ways: it limits the index to 31 bits,
and then it limits files so that they can't have data in that last byte
of a page that has the highest 31-bit index (ie page index 0x7fffffff).
Neither of those limitations make sense. The index is actually the full
32 bit unsigned value, and we can use that whole full page. So the
maximum size of the file would logically be "PAGE_SIZE << BITS_PER_LONG".
However, we do wan tto avoid the maximum index, because we have code
that iterates over the page indexes, and we don't want that code to
overflow. So the maximum size of a file on a 32-bit host should
actually be one page less than the full 32-bit index.
So the actual limit is ULONG_MAX << PAGE_SHIFT. That means that we will
not actually be using the page of that last index (ULONG_MAX), but we
can grow a file up to that limit.
The wrong value of MAX_LFS_FILESIZE actually caused problems for Doug
Nazar, who was still using a 32-bit host, but with a 9.7TB 2 x RAID5
volume. It turns out that our old MAX_LFS_FILESIZE was 8TiB (well, one
byte less), but the actual true VM limit is one page less than 16TiB.
This was invisible until commit c2a9737f45 ("vfs,mm: fix a dead loop
in truncate_inode_pages_range()"), which started applying that
MAX_LFS_FILESIZE limit to block devices too.
NOTE! On 64-bit, the page index isn't a limiter at all, and the limit is
actually just the offset type itself (loff_t), which is signed. But for
clarity, on 64-bit, just use the maximum signed value, and don't make
people have to count the number of 'f' characters in the hex constant.
So just use LLONG_MAX for the 64-bit case. That was what the value had
been before too, just written out as a hex constant.
Fixes: c2a9737f45 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()")
Reported-and-tested-by: Doug Nazar <nazard@nazar.ca>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull input fixes from Dmitry Torokhov:
- a tweak to the IBM Trackpoint driver that helps recognizing
trackpoints on never Lenovo Carbons
- a fix to the ALPS driver solving scroll issues on some Dells
- yet another ACPI ID has been added to Elan I2C toucpad driver
- quieted diagnostic message in soc_button_array driver
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad
Input: soc_button_array - silence -ENOENT error on Dell XPS13 9365
Input: trackpoint - add new trackpoint firmware ID
Input: elan_i2c - add ELAN0602 ACPI ID to support Lenovo Yoga310
Pull x86 fixes from Ingo Molnar:
"Two fixes: one for an ldt_struct handling bug and a cherry-picked
objtool fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix use-after-free of ldt_struct
objtool: Fix '-mtune=atom' decoding support in objtool 2.0
Pull timer fix from Ingo Molnar:
"Fix a timer granularity handling race+bug, which would manifest itself
by spuriously increasing timeouts of some timers (from 1 jiffy to ~500
jiffies in the worst case measured) in certain nohz states"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix excessive granularity of new timers after a nohz idle
Pull perf fix from Ingo Molnar:
"A single fix to not allow nonsensical event groups that result in
kernel warnings"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix group {cpu,task} validation
In comqit fc6eead7c1 ("time: Clean up CLOCK_MONOTONIC_RAW time
handling"), the following code got mistakenly added to the update of the
raw timekeeper:
/* Update the monotonic raw base */
seconds = tk->raw_sec;
nsec = (u32)(tk->tkr_raw.xtime_nsec >> tk->tkr_raw.shift);
tk->tkr_raw.base = ns_to_ktime(seconds * NSEC_PER_SEC + nsec);
Which adds the raw_sec value and the shifted down raw xtime_nsec to the
base value.
But the read function adds the shifted down tk->tkr_raw.xtime_nsec value
another time, The result of this is that ktime_get_raw() users (which are
all internal users) see the raw time move faster then it should (the rate
at which can vary with the current size of tkr_raw.xtime_nsec), which has
resulted in at least problems with graphics rendering performance.
The change tried to match the monotonic base update logic:
seconds = (u64)(tk->xtime_sec + tk->wall_to_monotonic.tv_sec);
nsec = (u32) tk->wall_to_monotonic.tv_nsec;
tk->tkr_mono.base = ns_to_ktime(seconds * NSEC_PER_SEC + nsec);
Which adds the wall_to_monotonic.tv_nsec value, but not the
tk->tkr_mono.xtime_nsec value to the base.
To fix this, simplify the tkr_raw.base accumulation to only accumulate the
raw_sec portion, and do not include the tkr_raw.xtime_nsec portion, which
will be added at read time.
Fixes: fc6eead7c1 ("time: Clean up CLOCK_MONOTONIC_RAW time handling")
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Daniel Mentz <danielmentz@google.com>
Link: http://lkml.kernel.org/r/1503701824-1645-1-git-send-email-john.stultz@linaro.org
Only one iwlwifi patch this time.
iwlwifi
* fix multiple times reported lockdep warning found by new locking
annotation introduced in v4.13-rc1
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZoCT5AAoJEG4XJFUm622b1Y8H/iiQbFBDv9uyoGYZOjbJtpfY
B+hJoytPOGsuCQSjDApM7/nfjJcHOwESpN0CFaHwusumMFiBIMVKBTrml8RI7jmE
NBUnsBld1fJzsB1ErlI0vHN7YXym38VD280q15jEVa+XaGEo7l51nJGGLfmw64Ac
EPvBoLsTsPbpsNpzfHLCYuUcucTEREi90P+qek4uzmikcf07bIa14h0WC0XG6QdQ
YJpRNhWH4znvqwEltzNtpADzRiQma3pXu9JwtgTfaPy1vFbVaSzaDNqLdt8UE6IL
ANVAXBQQFR887f0NKwAVFfYDD50XT2ThBvsCEVQ4fecf8r3x1WfoSIEvvwGcmuQ=
=Sn3N
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2017-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.13
Only one iwlwifi patch this time.
iwlwifi
* fix multiple times reported lockdep warning found by new locking
annotation introduced in v4.13-rc1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, in the udp6 code, the dst cookie is not initialized/updated
concurrently with the RX dst used by early demux.
As a result, the dst_check() in the early_demux path always fails,
the rx dst cache is always invalidated, and we can't really
leverage significant gain from the demux lookup.
Fix it adding udp6 specific variant of sk_rx_dst_set() and use it
to set the dst cookie when the dst entry is really changed.
The issue is there since the introduction of early demux for ipv6.
Fixes: 5425077d73 ("net: ipv6: Add early demux handler for UDP unicast")
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check memory allocation failure and return -ENOMEM in such a case, as
already done few lines below for another memory allocation.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli says:
====================
r8169: Be drop monitor friendly
First patch may be questionable but no other driver appears to be
doing that and while it is defendable to account for left packets as
dropped during TX clean, this appears misleading. I picked Stanislaw
changes which brings us back to 2010, but this was present from
pre-git days as well.
Second patch fixes the two missing calls to dev_consume_skb_any().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
rtl_tx() is the TX reclamation process whereas rtl8169_tx_clear_range() does
the TX ring cleaning during shutdown, both of these functions should call
dev_consume_skb_any() to be drop monitor friendly.
Fixes: cac4b22f3d ("r8169: do not account fragments as packets")
Fixes: eb78139790 ("r8169: Do not use dev_kfree_skb in xmit path")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtl8169_tx_clear_range() is responsible for cleaning up the TX ring
during interface shutdown, incrementing tx_dropped for every SKB that we
left at the time in the ring is misleading.
Fixes: cac4b22f3d ("r8169: do not account fragments as packets")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
