Rather than relying on the system to have cross toolchains available,
simply download musl.cc's ones and use that libc.so, and then we use it
to fill in a few missing platforms, such as riscv64, riscv64, powerpc64,
and s390x.
Since riscv doesn't have a second serial port in its device description,
we have to use virtio's vport. This is actually the same situation on
ARM, but we were previously hacking QEMU up to work around this, which
required a custom QEMU. Instead just do the vport trick on ARM too.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The parallel tests were added to catch queueing issues from multiple
cores. But what happens in reality when testing tons of processes is
that these separate threads wind up fighting with the scheduler, and we
wind up with contention in places we don't care about that decrease the
chances of hitting a bug. So just do a test with the number of CPU
cores, rather than trying to scale up arbitrarily.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is customary for selftests to have a comment with a topology diagram,
which serves to illustrate the situation in which the test is done. This
selftest lacks it. Add it.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is customary for selftests to have a comment with a topology diagram,
which serves to illustrate the situation in which the test is done. This
selftest lacks it. Add it.
While at it, fix the list of tests so that the test names are enumerated
one at a line.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A number of mlxsw-specific QoS tests use manual QoS DCB management. As
such, they need to make sure lldpad is not running, because it would
override the configuration the test has applied using other tools. To that
end, these selftests invoke the bail_on_lldpad() helper, which terminates
the selftest if th lldpad is running.
Some of these tests however first install the bash exit trap, which invokes
a cleanup() at the test exit. If bail_on_lldpad() has terminated the script
even before the setup part was run, the cleanup part will be very confused.
Therefore make sure bail_on_lldpad() is invoked before the cleanup is
registered.
While there are still edge cases where the user terminates the script
before the setup was fully done, this takes care of a common situation
where the cleanup would be invoked in an inconsistent state.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds a selftest script that performs a comprehensive
behavioral/functional test of all userspace PM capabilities by exercising
all the newly added APIs and changes to support said capabilities.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the "pm_nl_ctl" testing sample with a
"listen" option to bind a MPTCP listening socket to the
provided addr+port. This option is exercised in testing
subflow initiation scenarios in conjunction with userspace
path managers where the MPTCP application does not hold an
active listener to accept requests for new subflows.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds to self-testing support for the MPTCP netlink interface
by capturing various MPTCP netlink events (and all their metadata)
associated with connections, subflows and address announcements.
It is used in self-testing scripts that exercise MPTCP netlink commands
to precisely validate those operations by examining the dispatched
MPTCP netlink events in response to those commands.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the "pm_nl_ctl" testing sample with a "dsf"
(destroy subflow) option to support the newly added netlink interface
command MPTCP_PM_CMD_SUBFLOW_DESTROY over the chosen MPTCP connection.
E.g. ./pm_nl_ctl dsf lip 10.0.2.1 lport 44567 rip 10.0.2.2 rport 56789
token 823274047
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the "pm_nl_ctl" testing sample with a "csf"
(create subflow) option to support the newly added netlink interface
command MPTCP_PM_CMD_SUBFLOW_CREATE over the chosen MPTCP connection.
E.g. ./pm_nl_ctl csf lip 10.0.2.1 lid 23 rip 10.0.2.2 rport 56789
token 823274047
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the "pm_nl_ctl" testing sample with a "rem"
(remove) option to support the newly added netlink interface command
MPTCP_PM_CMD_REMOVE to issue a REMOVE_ADDR signal over the
chosen MPTCP connection.
E.g. ./pm_nl_ctl rem token 823274047 id 23
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change updates the "pm_nl_ctl" testing sample with an "ann"
(announce) option to support the newly added netlink interface command
MPTCP_PM_CMD_ANNOUNCE to issue ADD_ADDR advertisements over the
chosen MPTCP connection.
E.g. ./pm_nl_ctl ann 192.168.122.75 token 823274047 id 25 dev enp1s0
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the arm64 kselftests attempt to locate the ABI headers using
custom logic which doesn't work correctly in the case of out of tree builds
if KBUILD_OUTPUT is not specified. Since lib.mk defines KHDR_INCLUDES with
the appropriate flags we can simply remove the custom logic and use that
instead.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220503231655.211346-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Assert that the vCPU exits to userspace with KVM_SYSTEM_EVENT_SUSPEND if
the guest calls PSCI SYSTEM_SUSPEND. Additionally, guarantee that the
SMC32 and SMC64 flavors of this call are discoverable with the
PSCI_FEATURES call.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-13-oupton@google.com
Split up the current test into several helpers that will be useful to
subsequent test cases added to the PSCI test suite.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-12-oupton@google.com
Setting a vCPU's MP state to KVM_MP_STATE_STOPPED has the effect of
powering off the vCPU. Rather than using the vCPU init feature flag, use
the KVM_SET_MP_STATE ioctl to power off the target vCPU.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-11-oupton@google.com
The PSCI and PV stolen time tests both need to make SMCCC calls within
the guest. Create a helper for making SMCCC calls and rework the
existing tests to use the library function.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-10-oupton@google.com
There are other interactions with PSCI worth testing; rename the PSCI
test to make it more generic.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220504032446.4133305-9-oupton@google.com
Test basic (port-default, VLAN PCP and IP DSCP) QoS classification for
Ocelot switches. Advanced QoS classification using tc filters is covered
by tc_flower_chains.sh in the same directory.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220502155424.4098917-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check userspace PM behavior to ensure ADD_ADDR echoes are only sent when
there is an active userspace daemon. If the daemon is restarting or
hasn't loaded yet, the missing echo will cause the peer to retransmit
the ADD_ADDR - and hopefully the daemon will be ready to receive it at
that later time.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This verifies that if a filter is set up with the wait killable feature
that it obeys the semantics that non-fatal signals are ignored during
a notification after the notification is received.
Cases tested:
* Non-fatal signal prior to receive
* Non-fatal signal during receive
* Fatal signal after receive
The normal signal handling is tested in user_notification_signal. That
behaviour remains unchanged.
On an unsupported kernel, these tests will immediately bail as it relies
on a new seccomp flag.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503080958.20220-4-sargun@sargun.me
This splits up the get_proc_stat function to make it so we can use it as a
generic helper to read the nth field from multiple different files, versus
replicating the logic in multiple places.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503080958.20220-3-sargun@sargun.me
Add the psuedo-firmware registers KVM_REG_ARM_STD_BMAP,
KVM_REG_ARM_STD_HYP_BMAP, and KVM_REG_ARM_VENDOR_HYP_BMAP to
the base_regs[] list.
Also, add the COPROC support for KVM_REG_ARM_FW_FEAT_BMAP.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220502233853.1233742-10-rananta@google.com
Introduce a KVM selftest to check the hypercall interface
for arm64 platforms. The test validates the user-space'
[GET|SET]_ONE_REG interface to read/write the psuedo-firmware
registers as well as its effects on the guest upon certain
configurations.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220502233853.1233742-9-rananta@google.com
The PSCI and PV stolen time tests both need to make SMCCC calls within
the guest. Create a helper for making SMCCC calls and rework the
existing tests to use the library function.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220409184549.1681189-11-oupton@google.com
There are other interactions with PSCI worth testing; rename the PSCI
test to make it more generic.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220409184549.1681189-10-oupton@google.com
The program uses CLOCK_TAI as default clock since it was added to the
Linux repo. In commit:
| 040806343b ("selftests/net: so_txtime multi-host support")
a help text stating the wrong default clock was added.
This patch fixes the help text.
Fixes: 040806343b ("selftests/net: so_txtime multi-host support")
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220502094638.1921702-3-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch fixes the parsing of the cmd line supplied start time on 32
bit systems. A "long" on 32 bit systems is only 32 bit wide and cannot
hold a timestamp in nano second resolution.
Fixes: 040806343b ("selftests/net: so_txtime multi-host support")
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220502094638.1921702-2-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test that sends 1Gbps of traffic through the switch, into which it
then injects a burst of traffic and tests that there are no drops.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add two helpers, start_traffic_pktsize() and start_tcp_traffic_pktsize(),
that allow explicit overriding of packet size. Change start_traffic() and
start_tcp_traffic() to dispatch through these helpers with the default
packet size.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In emulated environments, the bridge ports enslaved to br1 get a carrier
before changing br1's PVID. This means that by the time the PVID is
changed, br1 is already operational and configured with an IPv6
link-local address.
When the test is run with netdevs registered by mlxsw, changing the PVID
is vetoed, as changing the VID associated with an existing L3 interface
is forbidden. This restriction is similar to the 8021q driver's
restriction of changing the VID of an existing interface.
Fix this by taking br1 down and bringing it back up when it is fully
configured.
With this fix, the test reliably passes on top of both the SW and HW
data paths (emulated or not).
Fixes: 239e754af8 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220502084507.364774-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Felix VSC9959 switch in NXP LS1028A supports the tc-gate action
which enforced time-based access control per stream. A stream as seen by
this switch is identified by {MAC DA, VID}.
We use the standard forwarding selftest topology with 2 host interfaces
and 2 switch interfaces. The host ports must require timestamping non-IP
packets and supporting tc-etf offload, for isochron to work. The
isochron program monitors network sync status (ptp4l, phc2sys) and
deterministically transmits packets to the switch such that the tc-gate
action either (a) always accepts them based on its schedule, or
(b) always drops them.
I tried to keep as much of the logic that isn't specific to the NXP
LS1028A in a new tsn_lib.sh, for future reuse. This covers
synchronization using ptp4l and phc2sys, and isochron.
The cycle-time chosen for this selftest isn't particularly impressive
(and the focus is the functionality of the switch), but I didn't really
know what to do better, considering that it will mostly be run during
debugging sessions, various kernel bloatware would be enabled, like
lockdep, KASAN, etc, and we certainly can't run any races with those on.
I tried to look through the kselftest framework for other real time
applications and didn't really find any, so I'm not sure how better to
prepare the environment in case we want to go for a lower cycle time.
At the moment, the only thing the selftest is ensuring is that dynamic
frequency scaling is disabled on the CPU that isochron runs on. It would
probably be useful to have a blacklist of kernel config options (checked
through zcat /proc/config.gz) and some cyclictest scripts to run
beforehand, but I saw none of those.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20220501112953.3298973-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG
o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS
KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q
4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k
chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3
odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB
J3+wdek=
=39Ca
-----END PGP SIGNATURE-----
Merge 5.18-rc5 into char-misc-next
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a boilerplate test loop to run all tests in
vrf_strict_mode_test.sh. Add a -t flag that allows a selected test to
run. Remove the vrf_strict_mode_tests function which is now unused.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220429164658.GA656707@jaehee-ThinkPad-X1-Extreme
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When generating the selftests to another folder, the fixed tests are
missing as they are not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net/forwarding" INSTALL_PATH=/tmp/kselftests
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When generating the selftests to another folder, the fixed tests are
missing as they are not in Makefile, e.g.
make -C tools/testing/selftests/ install \
TARGETS="net" INSTALL_PATH=/tmp/kselftests
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tests ensure that the in-kernel path manager is bypassed when
the userspace path manager is configured. Kernel code is still
responsible for ADD_ADDR echo, so also make sure that's working.
Tested-by: Geliang Tang <geliang.tang@suse.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new test for memory.reclaim that verifies that the interface
correctly reclaims memory as intended, from both anon and file pages.
Link: https://lkml.kernel.org/r/20220425190040.2475377-5-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Chen Wandun <chenwandun@huawei.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, alloc_anon_noexit() calls alloc_anon() which instantly frees
the allocated memory. alloc_anon_noexit() is usually used with
cg_run_nowait() to run a process in the background that allocates
memory. It makes sense for the background process to keep the memory
allocated and not instantly free it (otherwise there is no point of
running it in the background).
Link: https://lkml.kernel.org/r/20220425190040.2475377-4-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Chen Wandun <chenwandun@huawei.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Michal Koutn" <mkoutny@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When multiple notifications are waiting, ensure they show up in order, as
defined by the (predictable) seccomp notification ID. This ensures FIFO
ordering of notification delivery as notification ids are monitonic and
decided when the notification is generated (as opposed to received).
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: linux-kselftest@vger.kernel.org
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220428015447.13661-2-sargun@sargun.me
Running the seccomp tests under the kernel with "defconfig"
shouldn't fail. Because the CONFIG_USER_NS is not supported
in "defconfig". Skipping this case instead of failing it is
better.
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/7f7687696a5c0a2d040a24474616e945c7cf2bb5.1648599460.git.yang.guang5@zte.com.cn
Add a test to check that PTRACE_O_SUSPEND_SECCOMP can't be set without
CAP_SYS_ADMIN through PTRACE_SEIZE or PTRACE_SETOPTIONS.
Signed-off-by: Jann Horn <jannh@google.com>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Since commit 92d25637a3 ("kselftest: signal all child processes"), tests
are executed in background process groups. This means that trying to read
from stdin now throws SIGTTIN when stdin is a TTY, which breaks some
seccomp selftests that try to use read(0, NULL, 0) as a dummy syscall.
The simplest way to fix that is probably to just use -1 instead of 0 as
the dummy read()'s FD.
Fixes: 92d25637a3 ("kselftest: signal all child processes")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220319010011.1374622-1-jannh@google.com
asm/mce.h is not available on arm, and it is not needed to build nfit.c.
Remove the include.
It was likely needed for COPY_MC_TEST
Fixes: 3adb776384 ("x86, libnvdimm/test: Remove COPY_MC_TEST")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Link: https://lore.kernel.org/r/20220429074334.21771-1-msuchanek@suse.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The ioremap passed as argument to __nfit_test_ioremap can be a macro so
it cannot be passed as function argument. Make __nfit_test_ioremap into
a macro so that ioremap can be passed as untyped macro argument.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Fixes: 6bc756193f ("tools/testing/nvdimm: libnvdimm unit test infrastructure")
Link: https://lore.kernel.org/r/20220429134039.18252-1-msuchanek@suse.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add selftests to verify the firmware upload mechanism. These test
include simple firmware uploads as well as upload cancellation and
error injection. The test creates three firmware devices and verifies
that they all work correctly and independently.
Tested-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220426163532.114961-1-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These might not be issues yet, but they make the script more fragile.
Also by fixing them we give a better example to future readers, who might
copy/paste or otherwise re-use snippets from our script.
- Use "read -r", since we don't ever want read to be interpreting '\'
characters as escape sequences...
- Quote variables, to deal with spaces properly.
- Use $() instead of the older and harder-to-nest ``.
- Get rid of superfluous "$" prefixes inside arithmetic $(()).
Link: https://lkml.kernel.org/r/20220421224928.1848230-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previously, each test printed out its own header, dealt with its own
return code, etc. By just putting this standard stuff in a function, we
can delete > 300 lines from the script.
This also makes adding future tests easier. And, it gets rid of various
inconsistencies that already exist:
- Some tests correctly deal with ksft_skip, but others don't.
- Some tests just print the executable name, others print arguments, and
yet others print some comment in the header.
- Most tests print out a header with two separator lines, but not the
HMM smoke test or the memfd_secret test, which only print one.
- We had a redundant "exit" at the end, with all the boilerplate it's an
easy oversight.
Link: https://lkml.kernel.org/r/20220421224928.1848230-1-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This introduces three tests:
1) Sanity check soft dirty basic semantics: allocate area, clean,
dirty, check if the SD bit is flipped.
2) Check VMA reuse: validate the VM_SOFTDIRTY usage
3) Check soft-dirty on huge pages
This was motivated by Will Deacon's fix commit 912efa17e5 ("mm: proc:
Invalidate TLB after clearing soft-dirty page state"). I was tracking the
same issue that he fixed, and this test would have caught it.
Link: https://lkml.kernel.org/r/20220420084036.4101604-2-usama.anjum@collabora.com
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Will Deacon <will@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Bring common functions to a new file while keeping code as much same as
possible. These functions can be used in the new tests. This helps in
avoiding code duplication.
Link: https://lkml.kernel.org/r/20220420084036.4101604-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Gabriel Krisman Bertazi <krisman@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Print three possible reasons /sys/kernel/debug/gup_test cannot be opened
to help users of this test diagnose failures.
Link: https://lkml.kernel.org/r/20220405214809.3351223-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add some basic migration tests and in particular tests that will
stress both the pte and pmd migration entry wait paths.
Link: https://lkml.kernel.org/r/20220324014349.229253-1-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit 0e4b01df86 ("mm, memcg: throttle allocators when failing
reclaim over memory.high") allocating memory over memory.high became very
time consuming. But it's exactly what the memory.high test from cgroup
kselftests is doing: it tries to allocate 100M with 30M memory.high value.
It takes forever to complete.
In order to keep it passing (or failing) in a reasonable amount of time
let's try to allocate only a little over 30M: 31M to be precise.
With this change test_memcontrol finishes in a reasonable amount of
time:
$ time ./test_memcontrol
ok 1 test_memcg_subtree_control
ok 2 test_memcg_current
ok 3 test_memcg_min
ok 4 test_memcg_low
ok 5 test_memcg_high
ok 6 test_memcg_max
ok 7 test_memcg_oom_events
ok 8 test_memcg_swap_max
ok 9 test_memcg_sock
ok 10 test_memcg_oom_group_leaf_events
ok 11 test_memcg_oom_group_parent_events
ok 12 test_memcg_oom_group_score_events
real 0m2.273s
user 0m0.064s
sys 0m0.739s
Link: https://lkml.kernel.org/r/20220415000133.3955987-3-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: David Vernet <void@manifault.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: memcg kselftests fixes".
This patch (of 4):
Commit 9852ae3fe5 ("mm, memcg: consider subtrees in memory.events") made
memory.events recursive: all events are propagated upwards by the tree.
It was a change in semantics.
It broke the oom group leaf events test: it assumes that after an OOM the
oom_kill counter is zero on parent's level.
Let's adjust the test: it should have similar expectations for the child
and parent levels.
The test passes after this fix.
Link: https://lkml.kernel.org/r/20220415000133.3955987-2-roman.gushchin@linux.dev
Link: https://lkml.kernel.org/r/20220415000133.3955987-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: David Vernet <void@manifault.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a subtest that excercises bpf_map__set_autocreate() API and
validates that libbpf properly fixes up BPF verifier log with correct
map information.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220428041523.4089853-5-andrii@kernel.org
Add new or modify existing SEC() definitions to be target-less and
validate that libbpf handles such program definitions correctly.
For kprobe/kretprobe we also add explicit test that generic
bpf_program__attach() works in cases when kprobe definition contains
proper target. It wasn't previously tested as selftests code always
explicitly specified the target regardless.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220428185349.3799599-4-andrii@kernel.org
and netfilter.
Current release - new code bugs:
- bridge: switchdev: check br_vlan_group() return value
- use this_cpu_inc() to increment net->core_stats, fix preempt-rt
Previous releases - regressions:
- eth: stmmac: fix write to sgmii_adapter_base
Previous releases - always broken:
- netfilter: nf_conntrack_tcp: re-init for syn packets only,
resolving issues with TCP fastopen
- tcp: md5: fix incorrect tcp_header_len for incoming connections
- tcp: fix F-RTO may not work correctly when receiving DSACK
- tcp: ensure use of most recently sent skb when filling rate samples
- tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
- virtio_net: fix wrong buf address calculation when using xdp
- xsk: fix forwarding when combining copy mode with busy poll
- xsk: fix possible crash when multiple sockets are created
- bpf: lwt: fix crash when using bpf_skb_set_tunnel_key() from
bpf_xmit lwt hook
- sctp: null-check asoc strreset_chunk in sctp_generate_reconf_event
- wireguard: device: check for metadata_dst with skb_valid_dst()
- netfilter: update ip6_route_me_harder to consider L3 domain
- gre: make o_seqno start from 0 in native mode
- gre: switch o_seqno to atomic to prevent races in collect_md mode
Misc:
- add Eric Dumazet to networking maintainers
- dt: dsa: realtek: remove realtek,rtl8367s string
- netfilter: flowtable: Remove the empty file
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XOSt
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and netfilter.
Current release - new code bugs:
- bridge: switchdev: check br_vlan_group() return value
- use this_cpu_inc() to increment net->core_stats, fix preempt-rt
Previous releases - regressions:
- eth: stmmac: fix write to sgmii_adapter_base
Previous releases - always broken:
- netfilter: nf_conntrack_tcp: re-init for syn packets only,
resolving issues with TCP fastopen
- tcp: md5: fix incorrect tcp_header_len for incoming connections
- tcp: fix F-RTO may not work correctly when receiving DSACK
- tcp: ensure use of most recently sent skb when filling rate samples
- tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
- virtio_net: fix wrong buf address calculation when using xdp
- xsk: fix forwarding when combining copy mode with busy poll
- xsk: fix possible crash when multiple sockets are created
- bpf: lwt: fix crash when using bpf_skb_set_tunnel_key() from
bpf_xmit lwt hook
- sctp: null-check asoc strreset_chunk in sctp_generate_reconf_event
- wireguard: device: check for metadata_dst with skb_valid_dst()
- netfilter: update ip6_route_me_harder to consider L3 domain
- gre: make o_seqno start from 0 in native mode
- gre: switch o_seqno to atomic to prevent races in collect_md mode
Misc:
- add Eric Dumazet to networking maintainers
- dt: dsa: realtek: remove realtek,rtl8367s string
- netfilter: flowtable: Remove the empty file"
* tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
tcp: fix F-RTO may not work correctly when receiving DSACK
Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"
net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK
ixgbe: ensure IPsec VF<->PF compatibility
MAINTAINERS: Update BNXT entry with firmware files
netfilter: nft_socket: only do sk lookups when indev is available
net: fec: add missing of_node_put() in fec_enet_init_stop_mode()
bnx2x: fix napi API usage sequence
tls: Skip tls_append_frag on zero copy size
Add Eric Dumazet to networking maintainers
netfilter: conntrack: fix udp offload timeout sysctl
netfilter: nf_conntrack_tcp: re-init for syn packets only
net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK
net: Use this_cpu_inc() to increment net->core_stats
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
Bluetooth: hci_event: Fix creating hci_conn object on error status
Bluetooth: hci_event: Fix checking for invalid handle on error status
ice: fix use-after-free when deinitializing mailbox snapshot
ice: wait 5 s for EMP reset after firmware flash
ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg()
...
Currently the arm64 floating point tests don't support out of tree builds
due to two quirks of the kselftest build system. One is that when building
a program from multiple files we shouldn't separately compile the main
program to an object file as that will result in the pattern rule not
matching when adjusted for the output directory. The other is that we also
need to include $(OUTPUT) in the names of the binaries when specifying the
dependencies in order to ensure that they get picked up with O=.
Rewrite the dependencies for the executables to fix these issues. The
kselftest build system will ensure OUTPUT is always defined.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We provide a couple of object files with helpers linked into several of
the test programs, ensure they are cleaned.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Some of the rules in lib.mk use a top_srcdir variable to figure out where
the top of the kselftest tree is, provide it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The kselftest lib.mk provides a default all target which builds additional
programs from TEST_GEN_PROGS_EXTENDED, use that rather than using
TEST_PROGS_EXTENDED which is for programs that don't need to be built like
shell scripts. Leave fpsimd-stress and sve-stress there since they are
scripts.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220427181954.357975-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fix the following coccicheck warnings:
tools/testing/selftests/arm64/mte/check_child_memory.c:110:25-26:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_child_memory.c:88:24-25:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_child_memory.c:90:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_child_memory.c:147:24-25:
WARNING: Use ARRAY_SIZE
`ARRAY_SIZE` macro is defined in tools/testing/selftests/kselftest.h.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419032501.22790-1-guozhengkui@vivo.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a small testcase that attempts to do a clone() with ZA enabled and
verifies that it remains enabled with the same contents. We only check
one word in one horizontal vector of ZA since there's already other tests
that check for data corruption more broadly, we're just looking to make
sure that ZA is still enabled and it looks like the data got copied.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220419112247.711548-40-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For every possible combination of SVE and SME vector length verify that for
each possible value of SVCR after a syscall we leave streaming mode and ZA
is preserved. We don't need to take account of any streaming/non streaming
SVE vector length changes in the assembler code since the store instructions
will handle the vector length for us. We log if the system supports FA64 and
only try to set FFR in streaming mode if it does.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-39-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add some basic coverage for the ZA ptrace interface, including walking
through all the vector lengths supported in the system. Unlike SVE
doing syscalls does not discard the ZA state so when we set data in ZA
we run the child process briefly, having it add one to each byte in ZA
in order to validate that both the vector size and data are being read
and written as expected when the process runs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-38-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In order to allow ptrace of streaming mode SVE registers we have added a
new regset for streaming mode which in isolation offers the same ABI as
regular SVE with a different vector type. Add this to the array of regsets
we handle, together with additional tests for the interoperation of the
two regsets.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-37-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add test cases for the SME signal handing ABI patterned off the SVE tests.
Due to the small size of the tests and the differences in ABI (especially
around needing to account for both streaming SVE and ZA) there is some code
duplication here.
We currently cover:
- Reporting of the vector length.
- Lack of support for changing vector length.
- Presence and size of register state for streaming SVE and ZA.
As with the SVE tests we do not yet have any validation of register
contents.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-36-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a stress test for context switching of the ZA register state based on
the similar tests Dave Martin wrote for FPSIMD and SVE registers. The test
loops indefinitely writing a data pattern to ZA then reading it back and
verifying that it's what was expected.
Unlike the other tests we manually assemble the SME instructions since at
present no released toolchain has SME support integrated.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-35-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As part of the generic code for signal handling test cases we parse all
signal frames to make sure they have at least the basic form we expect
and that there are no unexpected frames present in the signal context.
Add coverage of the ZA signal frame to this code.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-34-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
One of the features of SME is the addition of streaming mode, in which we
have access to a set of streaming mode SVE registers at the SME vector
length. Since these are accessed using the SVE instructions let's reuse
the existing SVE stress test for testing with a compile time option for
controlling the few small differences needed:
- Enter streaming mode immediately on starting the program.
- In streaming mode FFR is removed so skip reading and writing FFR.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-33-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Provide RDVL helpers for SME and extend the main vector configuration tests
to cover SME.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-32-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Scalable Matrix Extension adds a new system register TPIDR2 intended to
be used by libc for its own thread specific use, add some kselftests which
exercise the ABI for it.
Since this test should with some adjustment work for TPIDR and any other
similar registers added in future add tests for it in a separate
directory rather than placing it with the other floating point tests,
nothing existing looked suitable so I created a new test directory
called "abi".
Since this feature is intended to be used by libc the test is built as
freestanding code using nolibc so we don't end up with the test program
and libc both trying to manage the register simultaneously and
distrupting each other. As a result of being written using nolibc rather
than using hwcaps to identify if SME is available in the system we check
for the default SME vector length configuration in proc, adding hwcap
support to nolibc seems like disproportionate effort and didn't feel
entirely idiomatic for what nolibc is trying to do.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-31-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Scalable Matrix Extenions (SME) introduces additional register state
with configurable vector lengths, similar to SVE but configured separately.
Extend vlset to support configuring this state with a --sme or -s command
line option.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-30-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As for the kernel so that we don't have ambitious toolchain requirements
to build the tests manually encode some of the SVE instructions.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419112247.711548-29-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The current tests use the prctls for various things but there's no
coverage of the edges of the interface so add some basics. This isn't
hugely useful as it is (it originally had some coverage for the
combinations with asymmetric mode but we removed the prctl() for that)
but it might be a helpful starting point for future work, for example
covering error handling.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419103243.24774-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we just have a big if statement with a non-specific diagnostic
checking both the mode and the tag. Since we'll need to dynamically check
for asymmetric mode support in the system and to improve debugability split
these checks out.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419103243.24774-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Help people figure out problems by printing a diagnostic when we get an
unexpected asynchronous fault.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419103243.24774-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The MTE selftests have a helper evaluate_test() which translates a return
code into a call to ksft_test_result_*(). Currently this only handles pass
and fail, silently ignoring any other code. Update the helper to support
skipped tests and log any unknown return codes as an error so we get at
least some diagnostic if anything goes wrong.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220419103243.24774-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we validate that we can set the floating point state via the SVE
regset and read the data via the FPSIMD regset but we do not valiate that
the opposite case works as expected. Add a test that covers this case,
noting that when reading via SVE regset the kernel has the option of
returning either SVE or FPSIMD data so we need to accept both formats.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220404090613.181272-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently the sve-ptrace test for setting and reading FPSIMD data assumes
that the child will start off in FPSIMD only mode and that it can use this
to read some FPSIMD mode SVE ptrace data, skipping the test if it can't.
This isn't an assumption guaranteed by the ABI and also limits how we can
use this testcase within the program. Instead skip the initial read and
just generate a FPSIMD format buffer for the write part of the test, making
the coverage more robust in the face of future kernel and test program
changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220404090613.181272-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The comment for ptrace_sve_get_fpsimd_data() doesn't describe what the test
does at all, fix that.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220404090613.181272-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Implement per subtest log collection for both parallel
and sequential test execution. This allows granular
per-subtest error output in the 'All error logs' section.
Add subtest log transfer into the protocol during the
parallel test execution.
Move all test log printing logic into dump_test_log
function. One exception is the output of test names when
verbose printing is enabled. Move test name/result
printing into separate functions to avoid repetition.
Print all successful subtest results in the log. Print
only failed test logs when test does not have subtests.
Or only failed subtests' logs when test has subtests.
Disable 'All error logs' output when verbose mode is
enabled. This functionality was already broken and is
causing confusion.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220427041353.246007-1-mykolal@fb.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-27
We've added 85 non-merge commits during the last 18 day(s) which contain
a total of 163 files changed, 4499 insertions(+), 1521 deletions(-).
The main changes are:
1) Teach libbpf to enhance BPF verifier log with human-readable and relevant
information about failed CO-RE relocations, from Andrii Nakryiko.
2) Add typed pointer support in BPF maps and enable it for unreferenced pointers
(via probe read) and referenced ones that can be passed to in-kernel helpers,
from Kumar Kartikeya Dwivedi.
3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward
progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel.
4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced
the effective prog array before the rcu_read_lock, from Stanislav Fomichev.
5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic
for USDT arguments under riscv{32,64}, from Pu Lehui.
6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire.
7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage
so it can be shipped under Alpine which is musl-based, from Dominique Martinet.
8) Clean up {sk,task,inode} local storage trace RCU handling as they do not
need to use call_rcu_tasks_trace() barrier, from KP Singh.
9) Improve libbpf API documentation and fix error return handling of various
API functions, from Grant Seltzer.
10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data
length of frags + frag_list may surpass old offset limit, from Liu Jian.
11) Various improvements to prog_tests in area of logging, test execution
and by-name subtest selection, from Mykola Lysenko.
12) Simplify map_btf_id generation for all map types by moving this process
to build time with help of resolve_btfids infra, from Menglong Dong.
13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*()
helpers; the probing caused always to use old helpers, from Runqing Yang.
14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS
tracing macros, from Vladimir Isaev.
15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel
switched to memcg-based memory accouting a while ago, from Yafang Shao.
16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu.
17) Fix BPF selftests in two occasions to work around regressions caused by latest
LLVM to unblock CI until their fixes are worked out, from Yonghong Song.
18) Misc cleanups all over the place, from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add libbpf's log fixup logic selftests
libbpf: Fix up verifier log for unguarded failed CO-RE relos
libbpf: Simplify bpf_core_parse_spec() signature
libbpf: Refactor CO-RE relo human description formatting routine
libbpf: Record subprog-resolved CO-RE relocations unconditionally
selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests
libbpf: Avoid joining .BTF.ext data with BPF programs by section name
libbpf: Fix logic for finding matching program for CO-RE relocation
libbpf: Drop unhelpful "program too large" guess
libbpf: Fix anonymous type check in CO-RE logic
bpf: Compute map_btf_id during build time
selftests/bpf: Add test for strict BTF type check
selftests/bpf: Add verifier tests for kptr
selftests/bpf: Add C tests for kptr
libbpf: Add kptr type tag macros to bpf_helpers.h
bpf: Make BTF type match stricter for release arguments
bpf: Teach verifier about kptr_get kfunc helpers
bpf: Wire up freeing of referenced kptr
bpf: Populate pairs of btf_id and destructor kfunc in btf
bpf: Adapt copy_map_value for multiple offset case
...
====================
Link: https://lore.kernel.org/r/20220427224758.20976-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the multiple checksum errors occur in chk_csum_nr(), print the
numbers of the errors as an extra message.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends chk_fail_nr to check the MP_FAIL response mibs.
Add a new argument invert for chk_fail_nr to allow it can check the
MP_FAIL TX and RX mibs from the opposite direction.
When the infinite map is received before the MP_FAIL response, the
response will be lost. A '-' can be added into fail_tx or fail_rx to
represent that MP_FAIL response TX or RX can be lost when doing the
checks.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the single subflow test case for MP_FAIL, to test the infinite
mapping case. Use the test_linkfail value to make 128KB test files.
Add a new function reset_with_fail(), in it use 'iptables' and 'tc
action pedit' rules to produce the bit flips to trigger the checksum
failures. Set validate_checksum to enable checksums for the MP_FAIL
tests without passing the '-C' argument. Set check_invert flag to
enable the invert bytes check for the output data in check_transfer().
Instead of the file mismatch error, this test prints out the inverted
bytes.
Add a new function pedit_action_pkts() to get the numbers of the packets
edited by the tc pedit actions. Print this numbers to the output.
Also add the needed kernel configures in the selftests config file.
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds a simple test of some basic matrix multiply assist (MMA)
instructions.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200622021832.15870-1-alistair@popple.id.au
Add tests validating that libbpf is indeed patching up BPF verifier log
with CO-RE relocation details. Also test partial and full truncation
scenarios.
This test might be a bit fragile due to changing BPF verifier log
format. If that proves to be frequently breaking, we can simplify tests
or remove the truncation subtests. But for now it seems useful to test
it in those conditions that are otherwise rarely occuring in practice.
Also test CO-RE relo failure in a subprog as that excercises subprogram CO-RE
relocation mapping logic which doesn't work out of the box without extra
relo storage previously done only for gen_loader case.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-11-andrii@kernel.org
Enhance linked_funcs selftest with two tricky features that might not
obviously work correctly together. We add CO-RE relocations to entry BPF
programs and mark those programs as non-autoloadable with SEC("?...")
annotation. This makes sure that libbpf itself handles .BTF.ext CO-RE
relocation data matching correctly for SEC("?...") programs, as well as
ensures that BPF static linker handles this correctly (this was the case
before, no changes are necessary, but it wasn't explicitly tested).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-6-andrii@kernel.org
Currently if opening /dev/null fails to open then file pointer fp
is null and further access to fp via fprintf will cause a null
pointer dereference. Fix this by returning a negative error value
when a null fp is detected.
Detected using cppcheck static analysis:
tools/testing/selftests/resctrl/fill_buf.c:124:6: note: Assuming
that condition '!fp' is not redundant
if (!fp)
^
tools/testing/selftests/resctrl/fill_buf.c:126:10: note: Null
pointer dereference
fprintf(fp, "Sum: %d ", ret);
Fixes: a2561b12fe ("selftests/resctrl: Add built in benchmark")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
All work currently pending will be done first by calling destroy_workqueue,
so there is no need to flush it explicitly.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220424062655.3221152-1-ran.jianping@zte.com.cn
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Ensure that the edge case where first member type was matched
successfully even if it didn't match BTF type of register is caught and
rejected by the verifier.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-14-memxor@gmail.com
Reuse bpf_prog_test functions to test the support for PTR_TO_BTF_ID in
BPF map case, including some tests that verify implementation sanity and
corner cases.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-13-memxor@gmail.com
This uses the __kptr and __kptr_ref macros as well, and tries to test
the stuff that is supposed to work, since we have negative tests in
test_verifier suite. Also include some code to test map-in-map support,
such that the inner_map_meta matches the kptr_off_tab of map added as
element.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-12-memxor@gmail.com
The function __perf_reg_mask has an unsigned return type, but returns a
negative constant to indicate an error condition. So we change unsigned
to int.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1650788802-14402-1-git-send-email-baihaowen@meizu.com
Add a new type flag for bpf_arg_type that when set tells verifier that
for a release function, that argument's register will be the one for
which meta.ref_obj_id will be set, and which will then be released
using release_reference. To capture the regno, introduce a new field
release_regno in bpf_call_arg_meta.
This would be required in the next patch, where we may either pass NULL
or a refcounted pointer as an argument to the release function
bpf_kptr_xchg. Just releasing only when meta.ref_obj_id is set is not
enough, as there is a case where the type of argument needed matches,
but the ref_obj_id is set to 0. Hence, we must enforce that whenever
meta.ref_obj_id is zero, the register that is to be released can only
be NULL for a release function.
Since we now indicate whether an argument is to be released in
bpf_func_proto itself, is_release_function helper has lost its utitlity,
hence refactor code to work without it, and just rely on
meta.release_regno to know when to release state for a ref_obj_id.
Still, the restriction of one release argument and only one ref_obj_id
passed to BPF helper or kfunc remains. This may be lifted in the future.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220424214901.2743946-3-memxor@gmail.com
resctrl_tests can be built or run using kselftests framework.
Add description on how to do so in README.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In kselftest framework, all tests can be build/run at a time,
and a sub test also can be build/run individually. As follows:
$ make kselftest-all TARGETS=resctrl
$ make -C tools/testing/selftests run_tests
$ make -C tools/testing/selftests TARGETS=resctrl run_tests
However, resctrl_tests cannot be run using kselftest framework,
users have to change directory to tools/testing/selftests/resctrl/,
run "make" to build executable file "resctrl_tests",
and run "sudo ./resctrl_tests" to execute the test.
To build/run resctrl_tests using kselftest framework.
Modify tools/testing/selftests/Makefile
and tools/testing/selftests/resctrl/Makefile.
Even after this change, users can still build/run resctrl_tests
without using framework as before.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> # resctrl changes
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In kselftest framework, if a sub test can not run by some reasons,
the test result should be marked as SKIP rather than FAIL.
Return KSFT_SKIP(4) instead of KSFT_FAIL(1) if resctrl_tests is not run
as root or it is run on a test environment which does not support resctrl.
- ksft_exit_fail_msg(): returns KSFT_FAIL(1)
- ksft_exit_skip(): returns KSFT_SKIP(4)
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When testing on a Intel(R) Xeon(R) Gold 6254 CPU @ 3.10GHz the resctrl
selftests fail due to timeout after exceeding the default time limit of
45 seconds. On this system the test takes about 68 seconds.
Since the failing test by default accesses a fixed size of memory, the
execution time should not vary significantly between different environment.
A new default of 120 seconds should be sufficient yet easy to customize
with the introduction of the "settings" file for reference.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In kselftest framework, a sub test is run using the timeout utility
and it will send SIGTERM to the test upon timeout.
In resctrl_tests, a child process is created by fork() to
run benchmark but SIGTERM is not set in sigaction().
If SIGTERM signal is received, the parent process will be killed,
but the child process still exists.
Kill child process before the parent process terminates
if SIGTERM signal is received.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
According to "Intel Resource Director Technology (Intel RDT) on
2nd Generation Intel Xeon Scalable Processors Reference Manual",
When the Intel Sub-NUMA Clustering(SNC) feature is enabled,
Intel CMT and MBM counters may not be accurate.
However, there does not seem to be an architectural way to detect
if SNC is enabled.
If the result of MBM&CMT test fails on Intel CPU,
print a message to let users know a possible cause of failure.
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, the resctrl_tests only has a function to detect AMD vendor.
Since when the Intel Sub-NUMA Clustering feature is enabled,
Intel CMT and MBM counters may not be accurate,
the resctrl_tests also need a function to detect Intel vendor.
And in the future, resctrl_tests will need a function to detect different
vendors, such as Arm.
Extend the function to detect Intel vendor as well. Also,
this function can be easily extended to detect other vendors.
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kselftest.h makes the __cpuid_count() macro available
to conveniently call the CPUID instruction.
Remove the local CPUID wrapper and use __cpuid_count()
from kselftest.h instead.
__cpuid_count() from kselftest.h is used instead of the
macro provided by the compiler since gcc v4.4 (via cpuid.h)
because the selftest needs to be supported with gcc v3.2,
the minimal required version for stable kernels.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kselftest.h makes the __cpuid_count() macro available
to conveniently call the CPUID instruction.
Remove the local CPUID wrapper and use __cpuid_count()
from kselftest.h instead.
__cpuid_count() from kselftest.h is used instead of the
macro provided by the compiler since gcc v4.4 (via cpuid.h)
because the selftest needs to be supported with gcc v3.2,
the minimal required version for stable kernels.
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kselftest.h makes the __cpuid_count() macro available
to conveniently call the CPUID instruction.
Remove the local CPUID wrapper and use __cpuid_count()
from already included kselftest.h instead.
__cpuid_count() from kselftest.h is used instead of the
macro provided by the compiler since gcc v4.4 (via cpuid.h)
because the selftest needs to be compiled with gcc v3.2,
the minimal required version for stable kernels.
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: linux-mm@kvack.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Some selftests depend on information provided by the CPUID instruction.
To support this dependency the selftests implement private wrappers for
CPUID.
Duplication of the CPUID wrappers should be avoided.
Both gcc and clang/LLVM provide __cpuid_count() macros but neither
the macro nor its header file are available in all the compiler
versions that need to be supported by the selftests. __cpuid_count()
as provided by gcc is available starting with gcc v4.4, so it is
not available if the latest tests need to be run in all the
environments required to support kernels v4.9 and v4.14 that
have the minimal required gcc v3.2.
Duplicate gcc's __cpuid_count() macro to provide a centrally defined
macro for __cpuid_count() to help eliminate the duplicate CPUID wrappers
while continuing to compile in older environments.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the damon selftests are not built with the rest of the
selftests. We add damon to the list of targets.
Fixes: b348eb7abd ("mm/damon: add user space selftests")
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Yuanchu Xie <yuanchu@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Most of the test suites in tools/testing/selftests contain a config file
that specifies which kernel config options need to be present in order for
the test suite to be able to run and perform meaningful validation. There
is no config file for the tools/testing/selftests/cgroup test suite, so
this patch adds one.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup cpu controller selftests have a test_cpucg_max() testcase
that validates the behavior of the cpu.max knob. Let's also add a
testcase that verifies that the behavior works correctly when set on a
nested cgroup.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup cpu controller test suite has a number of testcases that
validate the expected behavior of the cpu.weight knob, but none for
cpu.max. This testcase fixes that by adding a testcase for cpu.max as well.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup cpu controller test suite currently contains a testcase called
test_cpucg_nested_weight_underprovisioned() which verifies the expected
behavior of cpu.weight when applied to nested cgroups. That first testcase
validated the expected behavior when the processes in the leaf cgroups
overcommitted the system. This patch adds a complementary
test_cpucg_nested_weight_underprovisioned() testcase which validates
behavior when those leaf cgroups undercommit the system.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup cpu controller tests in
tools/testing/selftests/cgroup/test_cpu.c have some testcases that validate
the expected behavior of setting cpu.weight on cgroups, and then hogging
CPUs. What is still missing from the suite is a testcase that validates
nested cgroups. This patch adds test_cpucg_nested_weight_overprovisioned(),
which validates that a parent's cpu.weight will override its children if
they overcommit a host, and properly protect any sibling groups of that
parent.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently the binderfs test says what failure it encountered
without saying why it may occurred when it fails to mount
binderfs. So, Warn about enabling CONFIG_ANDROID_BINDERFS in the
running kernel.
Signed-off-by: Karthik Alapati <mail@karthek.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Once line card is activated, check the device FW version is exposed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once line card is provisioned, check if HW revision and INI version
are exposed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once line card is provisioned, check the count of devices on it and
print them out.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not much of a test but we keep on getting problems with boolean controls
not being called Switches so let's add a few basic checks to help people
spot problems.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220421115020.14118-1-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds an initial subset of forwarding selftests which I considered
to be relevant for DSA drivers, along with a forwarding.config that
makes it easier to run them (disables veth pair creation, makes sure MAC
addresses are unique and stable).
The intention is to request driver writers to run these selftests during
review and make sure that the tests pass, or at least that the problems
are known.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This tests the capability of switch ports to filter out undesired
traffic. Different drivers are expected to have different capabilities
here (so some may fail and some may pass), yet the test still has some
value, for example to check for regressions.
There are 2 kinds of failures, one is when a packet which should have
been accepted isn't (and that should be fixed), and the other "failure"
(as reported by the test) is when a packet could have been filtered out
(for being unnecessary) yet it was received.
The bridge driver fares particularly badly at this test:
TEST: br0: Unicast IPv4 to primary MAC address [ OK ]
TEST: br0: Unicast IPv4 to macvlan MAC address [ OK ]
TEST: br0: Unicast IPv4 to unknown MAC address [FAIL]
reception succeeded, but should have failed
TEST: br0: Unicast IPv4 to unknown MAC address, promisc [ OK ]
TEST: br0: Unicast IPv4 to unknown MAC address, allmulti [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv4 to joined group [ OK ]
TEST: br0: Multicast IPv4 to unknown group [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv4 to unknown group, promisc [ OK ]
TEST: br0: Multicast IPv4 to unknown group, allmulti [ OK ]
TEST: br0: Multicast IPv6 to joined group [ OK ]
TEST: br0: Multicast IPv6 to unknown group [FAIL]
reception succeeded, but should have failed
TEST: br0: Multicast IPv6 to unknown group, promisc [ OK ]
TEST: br0: Multicast IPv6 to unknown group, allmulti [ OK ]
mainly because it does not implement IFF_UNICAST_FLT. Yet I still think
having the test (with the failures) is useful in case somebody wants to
tackle that problem in the future, to make an easy before-and-after
comparison.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bombard a standalone switch port with various kinds of traffic to ensure
it is really standalone and doesn't leak packets to other switch ports.
Also check for switch ports in different bridges, and switch ports in a
VLAN-aware bridge but having different pvids. No forwarding should take
place in either case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pinging an IPv6 link-local multicast address selects the link-local
unicast address of the interface as source, and we'd like to monitor for
that in tcpdump.
Add a helper to the forwarding library which retrieves the link-local
IPv6 address of an interface, to make that task easier.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the forwarding library with calls to some small C programs which
join an IP multicast group and send some packets to it. Both IPv4 and
IPv6 groups are supported. Use cases range from testing IGMP/MLD
snooping, to RX filtering, to multicast routing.
Testing multicast traffic using msend/mreceive is intended to be done
using tcpdump.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend tcpdump_start() & C:o to handle multiple instances. Useful when
observing bridge operation, e.g., unicast learning/flooding, and any
case of multicast distribution (to these ports but not that one ...).
This means the interface argument is now a mandatory argument to all
tcpdump_*() functions, hence the changes to the ocelot flower test.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For some use-cases we may want to change the tcpdump flags used in
tcpdump_start(). For instance, observing interfaces without the PROMISC
flag, e.g. to see what's really being forwarded to the bridge interface.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By default, DSA switch ports inherit their MAC address from the DSA
master.
This works well for practical situations, but some selftests like
bridge_vlan_unaware.sh loop back 2 standalone DSA ports with 2 bridged
DSA ports, and require the bridge to forward packets between the
standalone ports.
Due to the bridge seeing that the MAC DA it needs to forward is present
as a local FDB entry (it coincides with the MAC address of the bridge
ports), the test packets are not forwarded, but terminated locally on
br0. In turn, this makes the ping and ping6 tests fail.
Address this by introducing an option to have stable MAC addresses.
When mac_addr_prepare is called, the current addresses of the netifs are
saved and replaced with 00:01:02:03:04:${netif number}. Then when
mac_addr_restore is called at the end of the test, the original MAC
addresses are restored. This ensures that the MAC addresses are unique,
which makes the test pass even for DSA ports.
The usage model is for the behavior to be opt-in via STABLE_MAC_ADDRS,
which DSA should set to true, all others behave as before. By hooking
the calls to mac_addr_prepare and mac_addr_restore within the forwarding
lib itself, we do not need to patch each individual selftest, the only
requirement is that pre_cleanup is called.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a function chk_infi_nr() to check the mibs for the
infinite mapping. Invoke it in chk_join_nr() when validate_checksum
is set.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Remove 's' & 'u' as valid ISA extension
* Do not allow disabling the base extensions 'i'/'m'/'a'/'c'
x86:
* Fix NMI watchdog in guests on AMD
* Fix for SEV cache incoherency issues
* Don't re-acquire SRCU lock in complete_emulated_io()
* Avoid NULL pointer deref if VM creation fails
* Fix race conditions between APICv disabling and vCPU creation
* Bugfixes for disabling of APICv
* Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
selftests:
* Do not use bitfields larger than 32-bits, they differ between GCC and clang
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJi3KUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMhvQf/Yncfg3MkOvKsVxnCe7diKDTI/E2n
wBGNIcL8r7L9oIltHL4Mh7JQTacHFQOZ9PQ30NO1p+pznZ03e8LR59IF1JpP7VOU
sWrLZ5a4bIAEjOpA7Jxcee6hUBwewBauDgFLbb+YAI2lAahiH7jVfywDRife/c3k
N2LjeA75K8UvMiDCfjxxxerFJK91zaqjWlUNF2OhtFp/5pnMfS+nli9Q8QS837pZ
oUf+0Beb2RpSHan+wbYVU7X3ZLwtpR0M3w3uXOG+X3as56wDf26znXS02aSwa45x
lfX+pqJfmb4vCJJDXt6avH27EVgTq0Vew+BhQHG3VLRO6uxZ+smX6qmsuw==
=kvbw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"The main and larger change here is a workaround for AMD's lack of
cache coherency for encrypted-memory guests.
I have another patch pending, but it's waiting for review from the
architecture maintainers.
RISC-V:
- Remove 's' & 'u' as valid ISA extension
- Do not allow disabling the base extensions 'i'/'m'/'a'/'c'
x86:
- Fix NMI watchdog in guests on AMD
- Fix for SEV cache incoherency issues
- Don't re-acquire SRCU lock in complete_emulated_io()
- Avoid NULL pointer deref if VM creation fails
- Fix race conditions between APICv disabling and vCPU creation
- Bugfixes for disabling of APICv
- Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
selftests:
- Do not use bitfields larger than 32-bits, they differ between GCC
and clang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: selftests: introduce and use more page size-related constants
kvm: selftests: do not use bitfields larger than 32-bits for PTEs
KVM: SEV: add cache flush to solve SEV cache incoherency issues
KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs
KVM: SVM: Simplify and harden helper to flush SEV guest page(s)
KVM: selftests: Silence compiler warning in the kvm_page_table_test
KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog
x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
KVM: SPDX style and spelling fixes
KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled
KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race
KVM: nVMX: Defer APICv updates while L2 is active until L1 is active
KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled
KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref
KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused
KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy
KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()
RISC-V: KVM: Restrict the extensions that can be disabled
RISC-V: KVM: Remove 's' & 'u' as valid ISA extension
It turns out that by having CONFIG_ACPI=n, we've been failing to boot
additional CPUs, and so these systems were functionally UP. The code
bloat is unfortunate for build times, but I don't see an alternative. So
this commit sets CONFIG_ACPI=y for x86_64 and i686 configs.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use bpf_link_create() API in fexit_stress test to attach FEXIT programs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Kui-Feng Lee <kuifeng@fb.com>
Link: https://lore.kernel.org/bpf/20220421033945.3602803-4-andrii@kernel.org
test_cpu.c includes testcases that validate the cgroup cpu controller.
This patch adds a new testcase called test_cpucg_weight_underprovisioned()
that verifies that processes with different cpu.weight that are all running
on an underprovisioned system, still get roughly the same amount of cpu
time.
Because test_cpucg_weight_underprovisioned() is very similar to
test_cpucg_weight_overprovisioned(), this patch also pulls the common logic
into a separate helper function that is invoked from both testcases, and
which uses function pointers to invoke the unique portions of the
testcases.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
test_cpu.c includes testcases that validate the cgroup cpu controller.
This patch adds a new testcase called test_cpucg_weight_overprovisioned()
that verifies the expected behavior of creating multiple processes with
different cpu.weight, on a system that is overprovisioned.
So as to avoid code duplication, this patch also updates cpu_hog_func_param
to take a new hog_clock_type enum which informs how time is counted in
hog_cpus_timed() (either process time or wall clock time).
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
test_cpu.c includes testcases that validate the cgroup cpu controller.
This patch adds a new testcase called test_cpucg_stats() that verifies the
expected behavior of the cpu.stat interface. In doing so, we define a
new hog_cpus_timed() function which takes a cpu_hog_func_param struct
that configures how many CPUs it uses, and how long it runs. Future
patches will also spawn threads that hog CPUs, so this function will
eventually serve those use-cases as well.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup selftests suite currently contains tests that validate various
aspects of cgroup, such as validating the expected behavior for memory
controllers, the expected behavior of cgroup.procs, etc. There are no tests
that validate the expected behavior of the cgroup cpu controller.
This patch therefore adds a new test_cpu.c file that will contain cpu
controller testcases. The file currently only contains a single testcase
that validates creating nested cgroups with cgroup.subtree_control
including cpu. Future patches will add more sophisticated testcases that
validate functional aspects of the cpu controller.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Turn kmem_cache_alloc() into a wrapper around kmem_cache_alloc_lru().
Fixes: 9bbdc0f324 ("xarray: use kmem_cache_alloc_lru to allocate xa_node")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Li Wang <liwang@redhat.com>
Merge misc fixes from Andrew Morton:
"13 patches.
Subsystems affected by this patch series: mm (memory-failure, memcg,
userfaultfd, hugetlbfs, mremap, oom-kill, kasan, hmm), and kcov"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/mmu_notifier.c: fix race in mmu_interval_notifier_remove()
kcov: don't generate a warning on vm_insert_page()'s failure
MAINTAINERS: add Vincenzo Frascino to KASAN reviewers
oom_kill.c: futex: delay the OOM reaper to allow time for proper futex cleanup
selftest/vm: add skip support to mremap_test
selftest/vm: support xfail in mremap_test
selftest/vm: verify remap destination address in mremap_test
selftest/vm: verify mmap addr in mremap_test
mm, hugetlb: allow for "high" userspace addresses
userfaultfd: mark uffd_wp regardless of VM_WRITE flag
memcg: sync flush only if periodic flush is delayed
mm/memory-failure.c: skip huge_zero_page in memory_failure()
mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()
The xz -9 option leads to an unnecessarily too large dictionary that
isn't really suitable for the kernel firmware loader. Pass the
dictionary size explicitly, instead.
While we're at it, make the xz command call defined in $RUN_XZ for
simplicity.
Fixes: 108ae07c50 ("selftests: firmware: Add compressed firmware tests")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220421152908.4718-3-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow the mremap test to be skipped due to errors such as failing to
parse the mmap_min_addr sysctl.
Link: https://lkml.kernel.org/r/20220420215721.4868-4-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use ksft_test_result_xfail for the tests which are expected to fail.
Link: https://lkml.kernel.org/r/20220420215721.4868-3-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because mremap does not have a MAP_FIXED_NOREPLACE flag, it can destroy
existing mappings. This causes a segfault when regions such as text are
remapped and the permissions are changed.
Verify the requested mremap destination address does not overlap any
existing mappings by using mmap's MAP_FIXED_NOREPLACE flag. Keep
incrementing the destination address until a valid mapping is found or
fail the current test once the max address is reached.
Link: https://lkml.kernel.org/r/20220420215721.4868-2-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Avoid calling mmap with requested addresses that are less than the
system's mmap_min_addr. When run as root, mmap returns EACCES when
trying to map addresses < mmap_min_addr. This is not one of the error
codes for the condition to retry the mmap in the test.
Rather than arbitrarily retrying on EACCES, don't attempt an mmap until
addr > vm.mmap_min_addr.
Add a munmap call after an alignment check as the mappings are retained
after the retry and can reach the vm.max_map_count sysctl.
Link: https://lkml.kernel.org/r/20220420215721.4868-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clean up code that was hardcoding masks for various fields,
now that the masks are included in processor.h.
For more cleanup, define PAGE_SIZE and PAGE_MASK just like in Linux.
PAGE_SIZE in particular was defined by several tests.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Red Hat's QE team reported test failure on access_tracking_perf_test:
Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages
guest physical test memory offset: 0x3fffbffff000
Populating memory : 0.684014577s
Writing to populated memory : 0.006230175s
Reading from populated memory : 0.004557805s
==== Test Assertion Failure ====
lib/kvm_util.c:1411: false
pid=125806 tid=125809 errno=4 - Interrupted system call
1 0x0000000000402f7c: addr_gpa2hva at kvm_util.c:1411
2 (inlined by) addr_gpa2hva at kvm_util.c:1405
3 0x0000000000401f52: lookup_pfn at access_tracking_perf_test.c:98
4 (inlined by) mark_vcpu_memory_idle at access_tracking_perf_test.c:152
5 (inlined by) vcpu_thread_main at access_tracking_perf_test.c:232
6 0x00007fefe9ff81ce: ?? ??:0
7 0x00007fefe9c64d82: ?? ??:0
No vm physical memory at 0xffbffff000
I can easily reproduce it with a Intel(R) Xeon(R) CPU E5-2630 with 46 bits
PA.
It turns out that the address translation for clearing idle page tracking
returned a wrong result; addr_gva2gpa()'s last step, which is based on
"pte[index[0]].pfn", did the calculation with 40 bits length and the
high 12 bits got truncated. In above case the GPA address to be returned
should be 0x3fffbffff000 for GVA 0xc0000000, but it got truncated into
0xffbffff000 and the subsequent gpa2hva lookup failed.
The width of operations on bit fields greater than 32-bit is
implementation defined, and differs between GCC (which uses the bitfield
precision) and clang (which uses 64-bit arithmetic), so this is a
potential minefield. Remove the bit fields and using manual masking
instead.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2075036
Reported-by: Nana Liu <nanliu@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current release - regressions:
- rxrpc: restore removed timer deletion
Current release - new code bugs:
- gre: fix device lookup for l3mdev use-case
- xfrm: fix egress device lookup for l3mdev use-case
Previous releases - regressions:
- sched: cls_u32: fix netns refcount changes in u32_change()
- smc: fix sock leak when release after smc_shutdown()
- xfrm: limit skb_page_frag_refill use to a single page
- eth: atlantic: invert deep par in pm functions, preventing null
derefs
- eth: stmmac: use readl_poll_timeout_atomic() in atomic state
Previous releases - always broken:
- gre: fix skb_under_panic on xmit
- openvswitch: fix OOB access in reserve_sfa_size()
- dsa: hellcreek: calculate checksums in tagger
- eth: ice: fix crash in switchdev mode
- eth: igc:
- fix infinite loop in release_swfw_sync
- fix scheduling while atomic
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmJhLbcSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOknxkP/jiAATyBt/HQFykQNiZ7cdrcv1gzJ3Lg
BmrV1QmbrNwfffBtmBHRliP7x0vNF6fV8LUKjfyQh1YgJw8I9F/FDH/1fojhBZq/
JJpZrh+TFikBBM4RDMJ0aQi6ssOEo8S9gfN4W48F/49O4S3Q/Gbgv7Lk0jL8utRz
7RgGUVxX+xOSklvh2Tn/xHdYPeebPhLojiKhmH+l6xghyDEUHkemF3AkLwV9QMnq
LXmNP4y100xcdCW1bLbyVcq0lbwdLSg4SL+2wC2bvgEDRR0MUezQyNxD6Oqrmusn
sASZYgNK92R9ekLBqTX/QwV/XIT+17hclTk4u0eV8GnemnibqOq7DhDqtKyeAzbD
mfU6Z5Ku6LuXA1U+2w1jxnd4cJTacA+dCRKcQD91ReguBbCd6zOweB996iBNLucK
Kf+r6qWWLxt+JmhSexb/T+oQHsdgvIPSQXNHUH2W8w+2DdTB/EPcSL76DlbZUxrP
up4EC3Nr3oxJjHbv7Iq4d9mHuRlwoOOpNJ3mARlfRDL6iuL0zECTweST3qT9YyIH
Cz4FGj7kwEDTxGtufoTVia+/JmS39f2lBrMKuhbTVo+qcYhs3zJM4Ki9bAgOKXqI
Qf+I73x9yQZ182afq4DsRXLnq/BajmRMyX2/kebY8KsARzRsPAktBhsT17SI6tUG
3MiLiHiIb0qM
=thBq
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from xfrm and can.
Current release - regressions:
- rxrpc: restore removed timer deletion
Current release - new code bugs:
- gre: fix device lookup for l3mdev use-case
- xfrm: fix egress device lookup for l3mdev use-case
Previous releases - regressions:
- sched: cls_u32: fix netns refcount changes in u32_change()
- smc: fix sock leak when release after smc_shutdown()
- xfrm: limit skb_page_frag_refill use to a single page
- eth: atlantic: invert deep par in pm functions, preventing null
derefs
- eth: stmmac: use readl_poll_timeout_atomic() in atomic state
Previous releases - always broken:
- gre: fix skb_under_panic on xmit
- openvswitch: fix OOB access in reserve_sfa_size()
- dsa: hellcreek: calculate checksums in tagger
- eth: ice: fix crash in switchdev mode
- eth: igc:
- fix infinite loop in release_swfw_sync
- fix scheduling while atomic"
* tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
drivers: net: hippi: Fix deadlock in rr_close()
selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets
selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets
nfc: MAINTAINERS: add Bug entry
net: stmmac: Use readl_poll_timeout_atomic() in atomic state
doc/ip-sysctl: add bc_forwarding
netlink: reset network and mac headers in netlink_dump()
net: mscc: ocelot: fix broken IP multicast flooding
net: dsa: hellcreek: Calculate checksums in tagger
net: atlantic: invert deep par in pm functions, preventing null derefs
can: isotp: stop timeout monitoring when no first frame was sent
bonding: do not discard lowest hash bit for non layer3+4 hashing
net: lan966x: Make sure to release ptp interrupt
ipv6: make ip6_rt_gc_expire an atomic_t
net: Handle l3mdev in ip_tunnel_init_flow
l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu
net/sched: cls_u32: fix possible leak in u32_init_knode()
net/sched: cls_u32: fix netns refcount changes in u32_change()
powerpc: Update MAINTAINERS for ibmvnic and VAS
net: restore alpha order to Ethernet devices in config
...
When compiling kvm_page_table_test.c, I get this compiler warning
with gcc 11.2:
kvm_page_table_test.c: In function 'pre_init_before_test':
../../../../tools/include/linux/kernel.h:44:24: warning: comparison of
distinct pointer types lacks a cast
44 | (void) (&_max1 == &_max2); \
| ^~
kvm_page_table_test.c:281:21: note: in expansion of macro 'max'
281 | alignment = max(0x100000, alignment);
| ^~~
Fix it by adjusting the type of the absolute value.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20220414103031.565037-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Switching to libbpf 1.0 API broke test_lpm_map and test_lru_map as error
reporting changed. Instead of setting errno and returning -1 bpf calls
now return -Exxx directly.
Drop errno checks and look at return code directly.
Fixes: b858ba8c52 ("selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20220421094320.1563570-1-asavkov@redhat.com
I am getting the following compilation error for prog_tests/uprobe_autoattach.c:
tools/testing/selftests/bpf/prog_tests/uprobe_autoattach.c: In function ‘test_uprobe_autoattach’:
./test_progs.h:209:26: error: pointer ‘mem’ may be used after ‘free’ [-Werror=use-after-free]
The value of mem is now used in one of the asserts, which is why it may be
confusing compilers. However, it is not dereferenced. Silence this by moving
free(mem) after the assert block.
Fixes: 1717e24801 ("selftests/bpf: Uprobe tests should verify param/return values")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220421132317.1583867-1-asavkov@redhat.com
Switching to libbpf 1.0 API broke test_sock and test_sysctl as they
check for return of bpf_prog_attach to be exactly -1. Switch the check
to '< 0' instead.
Fixes: b858ba8c52 ("selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20220421130104.1582053-1-asavkov@redhat.com
The torture.sh script provides extra memory for scftorture and rcuscale.
However, the total memory provided is only 1G, which is less than the
2G that is required for KASAN testing. This commit therefore ups the
torture.sh script's 1G to 2G.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that the Tasks RCU flavors are selected by their users rather than
by the rcutorture scenarios, torture.sh fails when attempting to run
NOPREEMPT scenarios for refscale and rcuscale. This commit therefore
makes torture.sh specify CONFIG_TASKS_TRACE_RCU=y to avoid such failure.
Why not also CONFIG_TASKS_RCU? Because tracing selects this one.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
KASAN allots significant memory to track allocation state, and the amount
of memory has increased recently, which results in frequent OOMs on a
few of the rcutorture scenarios. This commit therefore provides 2G of
memory for --kasan runs, up from the 512M default.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, torture.sh saves only the build output and exit code from the
"make allmodconfig" test. This commit also saves the .config file.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There is an extraneous "scf" in the per_version_boot_params shell function
used by scftorture. No harm done in that it is just passed as an argument
to the /init program in initrd, but this commit nevertheless removes it.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that CONFIG_PREEMPT_DYNAMIC=y is the default, kernels that are
ostensibly built with CONFIG_PREEMPT_NONE=y or CONFIG_PREEMPT_VOLUNTARY=y
are now actually built with CONFIG_PREEMPT=y, but are by default booted
so as to disable preemption. Although this allows much more flexibility
from a single kernel binary, it means that the current rcutorture
scenarios won't find build errors that happen only when preemption is
fully disabled at build time.
This commit therefore adds CONFIG_PREEMPT_DYNAMIC=n to several scenarios,
and while in the area switches one from CONFIG_PREEMPT_NONE=y to
CONFIG_PREEMPT_VOLUNTARY=y to add coverage of this Kconfig option.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit passes the csdlock_debug=1 kernel parameter in order to
enable CSD-lock stall reports for torture.sh scftorure runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kvm-again.sh script reruns an previously built set of kernels, so
the vmlinux files are associated with that previous run, not this on.
This results in kvm-find_errors.sh reporting spurious failed-build errors.
This commit therefore omits the vmlinux check for kvm-again.sh runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adjusts the scftorture PREEMPT and NOPREEMPT scenarios to
account for the TASKS_RCU Kconfig option being explicitly selected rather
than computed in isolation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks Rude and RCU Tasks Trace. Unless that kernel builds rcuscale,
whether built-in or as a module, in which case these RCU Tasks flavors are
(unnecessarily) built in. This both increases kernel size and increases
the complexity of certain tracing operations. This commit therefore
decouples the presence of rcuscale from the presence of RCU Tasks Rude
and RCU Tasks Trace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds rcuscale, whether built-in or as
a module, in which case RCU Tasks is (unnecessarily) built. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of rcuscale
from the presence of RCU Tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks Rude and RCU Tasks Trace. Unless that kernel builds refscale,
whether built-in or as a module, in which case these RCU Tasks flavors are
(unnecessarily) built in. This both increases kernel size and increases
the complexity of certain tracing operations. This commit therefore
decouples the presence of refscale from the presence of RCU Tasks Rude
and RCU Tasks Trace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds refscale, whether built-in or as a
module, in which case RCU Tasks is (unnecessarily) built in. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of refscale
from the presence of RCU Tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcutorture test suite makes double use of the rcutorture.stat_interval
module parameter. As its name suggests, it controls the frequency
of statistics printing, but it also controls the rcu_torture_writer()
stall timeout. The current setting of 15 seconds works surprisingly well.
However, given that the RCU tasks stall-warning timeout is ten -minutes-,
15 seconds is too short for TASKS02, which runs a non-preemptible kernel
on a single CPU.
This commit therefore adds checks for per-scenario specification of the
rcutorture.stat_interval module parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that CONFIG_PREEMPT_DYNAMIC=y is the default, TASKS02 no longer
builds a pure non-preemptible kernel that uses Tiny RCU. This commit
therefore fixes this new hole in rcutorture testing by adding
CONFIG_PREEMPT_DYNAMIC=n to the TASKS02 rcutorture scenario.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Unless a kernel builds rcutorture, whether built-in or as a module, that
kernel is also built with CONFIG_TASKS_RUDE_RCU, whether anything else
needs Tasks Rude RCU or not. This unnecessarily increases kernel size.
This commit therefore decouples the presence of rcutorture from the
presence of RCU Tasks Rude.
However, there is a need to select CONFIG_TASKS_RUDE_RCU for testing
purposes. Except that casual users must not be bothered with
questions -- for them, this needs to be fully automated. There is
thus a CONFIG_FORCE_TASKS_RUDE_RCU that selects CONFIG_TASKS_RUDE_RCU,
is user-selectable, but which depends on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds rcutorture, whether built-in or as
a module, in which case RCU Tasks is (unnecessarily) used. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of rcutorture
from the presence of RCU Tasks.
However, there is a need to select CONFIG_TASKS_RCU for testing purposes.
Except that casual users must not be bothered with questions -- for them,
this needs to be fully automated. There is thus a CONFIG_FORCE_TASKS_RCU
that selects CONFIG_TASKS_RCU, is user-selectable, but which depends
on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Unless a kernel builds rcutorture, whether built-in or as a module, that
kernel is also built with CONFIG_TASKS_TRACE_RCU, whether anything else
needs Tasks Trace RCU or not. This unnecessarily increases kernel size.
This commit therefore decouples the presence of rcutorture from the
presence of RCU Tasks Trace.
However, there is a need to select CONFIG_TASKS_TRACE_RCU for
testing purposes. Except that casual users must not be bothered with
questions -- for them, this needs to be fully automated. There is thus
a CONFIG_FORCE_TASKS_TRACE_RCU that selects CONFIG_TASKS_TRACE_RCU,
is user-selectable, but which depends on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, any kernel built with CONFIG_PREEMPTION=y also gets
CONFIG_TASKS_RCU=y, which is not helpful to people trying to build
preemptible kernels of minimal size.
Because CONFIG_TASKS_RCU=y is needed only in kernels doing tracing of
one form or another, this commit moves from TASKS_RCU deciding when it
should be enabled to the tracing Kconfig options explicitly selecting it.
This allows building preemptible kernels without TASKS_RCU, if desired.
This commit also updates the SRCU-N and TREE09 rcutorture scenarios
in order to avoid Kconfig errors that would otherwise result from
CONFIG_TASKS_RCU being selected without its CONFIG_RCU_EXPERT dependency
being met.
[ paulmck: Apply BPF_SYSCALL feedback from Andrii Nakryiko. ]
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Use bpf_prog_test_run_opts to test the skb_load_bytes function. Tests
the behavior when offset is greater than INT_MAX or a normal value.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220416105801.88708-4-liujian56@huawei.com
The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.
Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.
Fixes: d01724dd2a ("selftests: mlxsw: spectrum-2: Add a test for VxLAN flooding with IPv6")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.
Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.
Fixes: 94d302deae ("selftests: mlxsw: Add a test for VxLAN flooding")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop duplicate macro min() definition in mq_perf_tests.c, use MIN() in
sys/param.h instead.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This is the mips variant of commit <3990b5baf225> ("selftests/ftrace:
Add s390 support for kprobe args tests").
Signed-off-by: Ze Zhang <zhangze@loongson.cn>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This is the mips variant of commit <3990b5baf225> ("selftests/ftrace:
Add s390 support for kprobe args tests").
Signed-off-by: Ze Zhang <zhangze@loongson.cn>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a few test cases that ensure we catch cases of badly ordered type
tags in modifier chains.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220419164608.1990559-3-memxor@gmail.com
Take advantage of new libbpf feature for declarative non-autoloaded BPF
program SEC() definitions in few test that test single program at a time
out of many available programs within the single BPF object.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220419002452.632125-2-andrii@kernel.org
The llvm patch [1] enabled opaque pointer which caused selftest
'exhandler' failure.
...
; work = task->task_works;
7: (79) r1 = *(u64 *)(r6 +2120) ; R1_w=ptr_callback_head(off=0,imm=0) R6_w=ptr_task_struct(off=0,imm=0)
; func = work->func;
8: (79) r2 = *(u64 *)(r1 +8) ; R1_w=ptr_callback_head(off=0,imm=0) R2_w=scalar()
; if (!work && !func)
9: (4f) r1 |= r2
math between ptr_ pointer and register with unbounded min value is not allowed
below is insn 10 and 11
10: (55) if r1 != 0 goto +5
11: (18) r1 = 0 ll
...
In llvm, the code generation of 'r1 |= r2' happened in codegen
selectiondag phase due to difference of opaque pointer vs. non-opaque pointer.
Without [1], the related code looks like:
r2 = *(u64 *)(r6 + 2120)
r1 = *(u64 *)(r2 + 8)
if r2 != 0 goto +6 <LBB0_4>
if r1 != 0 goto +5 <LBB0_4>
r1 = 0 ll
...
I haven't found a good way in llvm to fix this issue. So let us workaround the
problem first so bpf CI won't be blocked.
[1] https://reviews.llvm.org/D123300
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220419050900.3136024-1-yhs@fb.com
This is a pre-req to add separate logging for each subtest in
test_progs.
Move all the mutable test data to the test_result struct.
Move per-test init/de-init into the run_one_test function.
Consolidate data aggregation and final log output in
calculate_and_print_summary function.
As a side effect, this patch fixes double counting of errors
for subtests and possible duplicate output of subtest log
on failures.
Also, add prog_tests_framework.c test to verify some of the
counting logic.
As part of verification, confirmed that number of reported
tests is the same before and after the change for both parallel
and sequential test execution.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220418222507.1726259-1-mykolal@fb.com
Introduce basic line card manipulation which consists of provisioning,
unprovisioning and activation of a line card.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new neighbour cache entry in STALE state for routers on receiving
an unsolicited (gratuitous) neighbour advertisement with
target link-layer-address option specified.
This is similar to the arp_accept configuration for IPv4.
A new sysctl endpoint is created to turn on this behaviour:
/proc/sys/net/ipv6/conf/interface/accept_unsolicited_na.
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to test various backward-edge control flow integrity methods,
add a test that manipulates the return address on the stack. Currently
only arm64 Pointer Authentication and Shadow Call Stack is supported.
$ echo CFI_BACKWARD | cat >/sys/kernel/debug/provoke-crash/DIRECT
Under SCS, successful test of the mitigation is reported as:
lkdtm: Performing direct entry CFI_BACKWARD
lkdtm: Attempting unchecked stack return address redirection ...
lkdtm: ok: redirected stack return address.
lkdtm: Attempting checked stack return address redirection ...
lkdtm: ok: control flow unchanged.
Under PAC, successful test of the mitigation is reported by the PAC
exception handler:
lkdtm: Performing direct entry CFI_BACKWARD
lkdtm: Attempting unchecked stack return address redirection ...
lkdtm: ok: redirected stack return address.
lkdtm: Attempting checked stack return address redirection ...
Unable to handle kernel paging request at virtual address bfffffc0088d0514
Mem abort info:
ESR = 0x86000004
EC = 0x21: IABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
[bfffffc0088d0514] address between user and kernel address ranges
...
If the CONFIGs are missing (or the mitigation isn't working), failure
is reported as:
lkdtm: Performing direct entry CFI_BACKWARD
lkdtm: Attempting unchecked stack return address redirection ...
lkdtm: ok: redirected stack return address.
lkdtm: Attempting checked stack return address redirection ...
lkdtm: FAIL: stack return address was redirected!
lkdtm: This is probably expected, since this kernel was built *without* CONFIG_ARM64_PTR_AUTH_KERNEL=y nor CONFIG_SHADOW_CALL_STACK=y
Co-developed-by: Dan Li <ashimida@linux.alibaba.com>
Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20220416001103.1524653-1-keescook@chromium.org
This Kselftest fixes update consists of a mqueue perf test memory leak
bug fix. mq_perf_tests fail to call CPU_FREE to free memory allocated
by CPU_SET.
-----BEGIN PGP SIGNATURE-----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=+5jP
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"A mqueue perf test memory leak bug fix.
mq_perf_tests failed to call CPU_FREE to free memory allocated by
CPU_SET"
* tag 'linux-kselftest-fixes-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu set
+WARNING: Possible comma where semicolon could be used
+#397: FILE: tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c:700:
++ tmr.type = KVM_XEN_VCPU_ATTR_TYPE_TIMER,
++ vcpu_ioctl(vm, VCPU_ID, KVM_XEN_VCPU_GET_ATTR, &tmr);
Fixes: 25eaeebe71 ("KVM: x86/xen: Add self tests for KVM_XEN_HVM_CONFIG_EVTCHN_SEND")
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220406063715.55625-4-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge branch for features that did not make it into 5.18:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add boilerplate test loop in test to run all tests
in fib_rule_tests.sh
Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
cxl_dvsec_decode_init() is tasked with checking whether legacy DVSEC
range based decode is in effect, or whether HDM can be enabled / already
is enabled. As such it either succeeds or fails and that result is the
return value. The @do_hdm_init variable is misleading in the case where
HDM operation is already found to be active, so just call it @retval.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/164730736435.3806189.2537160791687837469.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* Miscellaneous bugfixes
* A small cleanup for the new workqueue code
* Documentation syntax fix
RISC-V:
* Remove hgatp zeroing in kvm_arch_vcpu_put()
* Fix alignment of the guest_hang() in KVM selftest
* Fix PTE A and D bits in KVM selftest
* Missing #include in vcpu_fp.c
ARM:
* Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2
* Fix the MMU write-lock not being taken on THP split
* Fix mixed-width VM handling
* Fix potential UAF when debugfs registration fails
* Various selftest updates for all of the above
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJVtdMUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO33QgAiPh80xUkYfnl8FVN440S5F7UOPQ2
Cs/PbroNoP+Oz2GoG07aaqnUkFFApeBE5S+VMu1zhRNAernqpreN64/Y2iNaz0Y6
+MbvEX0FhQRW0UZJIF2m49ilgO8Gkt6aEpVRulq5G9w4NWiH1PtR25FVXfDMi8OG
xdw4x1jwXNI9lOQJ5EpUKVde3rAbxCfoC6hCTh5pCNd9oLuVeLfnC+Uv91fzXltl
EIeBlV0/mAi3RLp2E/AX38WP6ucMZqOOAy91/RTqX6oIx/7QL28ZNHXVrwQ67Hkd
pAr3MAk84tZL58lnosw53i5aXAf9CBp0KBnpk2KGutfRNJ4Vzs1e+DZAJA==
=vqAv
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86:
- Miscellaneous bugfixes
- A small cleanup for the new workqueue code
- Documentation syntax fix
RISC-V:
- Remove hgatp zeroing in kvm_arch_vcpu_put()
- Fix alignment of the guest_hang() in KVM selftest
- Fix PTE A and D bits in KVM selftest
- Missing #include in vcpu_fp.c
ARM:
- Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2
- Fix the MMU write-lock not being taken on THP split
- Fix mixed-width VM handling
- Fix potential UAF when debugfs registration fails
- Various selftest updates for all of the above"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (24 commits)
KVM: x86: hyper-v: Avoid writing to TSC page without an active vCPU
KVM: SVM: Do not activate AVIC for SEV-enabled guest
Documentation: KVM: Add SPDX-License-Identifier tag
selftests: kvm: add tsc_scaling_sync to .gitignore
RISC-V: KVM: include missing hwcap.h into vcpu_fp
KVM: selftests: riscv: Fix alignment of the guest_hang() function
KVM: selftests: riscv: Set PTE A and D bits in VS-stage page table
RISC-V: KVM: Don't clear hgatp CSR in kvm_arch_vcpu_put()
selftests: KVM: Free the GIC FD when cleaning up in arch_timer
selftests: KVM: Don't leak GIC FD across dirty log test iterations
KVM: Don't create VM debugfs files outside of the VM directory
KVM: selftests: get-reg-list: Add KVM_REG_ARM_FW_REG(3)
KVM: avoid NULL pointer dereference in kvm_dirty_ring_push
KVM: arm64: selftests: Introduce vcpu_width_config
KVM: arm64: mixed-width check should be skipped for uninitialized vCPUs
KVM: arm64: vgic: Remove unnecessary type castings
KVM: arm64: Don't split hugepages outside of MMU write lock
KVM: arm64: Drop unneeded minor version check from PSCI v1.x handler
KVM: arm64: Actually prevent SMC64 SYSTEM_RESET2 from AArch32
KVM: arm64: Generally disallow SMC64 for AArch32 guests
...
It wasn't clear when SLAB_LINEAR_OVERFLOW would be expected to trip.
Explicitly describe it and include the CONFIGs in the kselftest.
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The selftest "mqueue/mq_perf_tests.c" use CPU_ALLOC to allocate
CPU set. This cpu set is used further in pthread_attr_setaffinity_np
and by pthread_create in the code. But in current code, allocated
cpu set is not freed.
Fix this issue by adding CPU_FREE in the "shutdown" function which
is called in most of the error/exit path for the cleanup. There are
few error paths which exit without using shutdown. Add a common goto
error path with CPU_FREE for these cases.
Fixes: 7820b0715b ("tools/selftests: add mq_perf_tests")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Boiler plate for testing static mdb entries. This first test verifies
adding and removing host mdb entries for all supported types: IPv4,
IPv6, and MAC multicast.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For consecutive numbers the lscpu command collapses the output and just
shows the range with start and end. The processors are numbered that
way on POWER8.
$ sudo ppc64_cpu --smt=8
$ lscpu | grep '^NUMA node'
NUMA node(s): 2
NUMA node0 CPU(s): 0-79
NUMA node8 CPU(s): 80-159
This causes the heuristic to detect the number threads per core, looking
for the number after the first comma, to fail, and QEMU aborts because of
invalid arguments.
$ lscpu | grep '^NUMA node0' | sed -e 's/^[^,-]*(,|\-)\([0-9]*\),.*$/\1/'
NUMA node0 CPU(s): 0-79
But the lscpu command shows the number of threads per core:
$ sudo ppc64_cpu --smt=8
$ lscpu | grep 'Thread(s) per core'
Thread(s) per core: 8
$ sudo ppc64_cpu --smt=off
$ lscpu | grep 'Thread(s) per core'
Thread(s) per core: 1
This commit therefore directly uses that value and replaces use of grep
with "sed -n" and its "p" command.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit weakens the checks of the kvm.sh script's --torture parameter
and the kvm-recheck.sh script's parsing so that experimental torture tests
may be created without updating these two scripts. The changes required
are to the appropriate Makefile and Kconfig file, plus a directory
whose name begins with "X" must be added to the rcutorture/configs file.
This new directory's name can then be passed in via the kvm.sh script's
--torture parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The torture.sh script normally runs unattended, so there is not much
point in the "ssh" command asking for a password. This commit therefore
adds the "-o Batchmode=yes" argument to each "ssh" command to cause it
to fail rather than ask for a password.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
An "echo" slipped in between an "ssh" and the "ret=$?" that was intended
to collect its exit code, which prevents torture.sh from detecting
"ssh" failure. This commit therefore reassociates the two.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the rcupdate.rcu_normal and rcupdate.rcu_expedited kernel
boot parameters are not regularly tested. The potential addition of
polled expedited grace-period APIs increases the amount of code that is
affected by these kernel boot parameters. This commit therefore adds a
"--do-rt" argument to torture.sh to exercise these kernel-boot options.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The tsc_scaling_sync's binary should be present in the .gitignore
file for the git to ignore it.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220406063715.55625-3-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check dumping of mptcp listener sockets:
1. filter by dport should not return any results
2. filter by sport should return listen sk
3. filter by saddr+sport should return listen sk
4. no filter should return listen sk
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Replace unnecessary list_for_each_entry_continue() in nf_tables,
from Jakob Koschel.
2) Add struct nf_conntrack_net_ecache to conntrack event cache and
use it, from Florian Westphal.
3) Refactor ctnetlink_dump_list(), also from Florian.
4) Bump module reference counter on cttimeout object addition/removal,
from Florian.
5) Consolidate nf_log MAC printer, from Phil Sutter.
6) Add basic logging support for unknown ethertype, from Phil Sutter.
7) Consolidate check for sysctl nf_log_all_netns toggle, also from Phil.
8) Replace hardcode value in nft_bitwise, from Jeremy Sowden.
9) Rename BASIC-like goto tags in nft_bitwise to more meaningful names,
also from Jeremy.
10) nft_fib support for reverse path filtering with policy-based routing
on iif. Extend selftests to cover for this new usecase, from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Its now possible to use fib expression in the forward chain (where both
the input and output interfaces are known).
Add a simple test case for this.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We have switched to memcg-based memory accouting and thus the rlimit is
not needed any more. LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK was introduced in
libbpf for backward compatibility, so we can use it instead now. After
this change, the header tools/testing/selftests/bpf/bpf_rlimit.h can be
removed.
This patch also removes the useless header sys/resource.h from many files
in tools/testing/selftests/bpf/.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220409125958.92629-3-laoar.shao@gmail.com
Improve subtest selection logic when using -t/-a/-d parameters.
In particular, more than one subtest can be specified or a
combination of tests / subtests.
-a send_signal -d send_signal/send_signal_nmi* - runs send_signal
test without nmi tests
-a send_signal/send_signal_nmi*,find_vma - runs two send_signal
subtests and find_vma test
-a 'send_signal*' -a find_vma -d send_signal/send_signal_nmi* -
runs 2 send_signal test and find_vma test. Disables two send_signal
nmi subtests
-t send_signal -t find_vma - runs two *send_signal* tests and one
*find_vma* test
This will allow us to have granular control over which subtests
to disable in the CI system instead of disabling whole tests.
Also, add new selftest to avoid possible regression when
changing prog_test test name selection logic.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220409001750.529930-1-mykolal@fb.com
- Fix a compile error in the nvdimm unit tests
- Fix a shadowed variable warning in the CXL PCI driver
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYlIY6QAKCRDfioYZHlFs
Z0aeAQDDYcicYRhLZ3Ljbg6stitBIumpdVcKDHm4WkC9gbmB4QEArnXLpcHPWyAa
zmgc1Yrp9gOnpNSRMog9Wc8NaR45KA8=
=Ov5t
-----END PGP SIGNATURE-----
Merge tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull cxl and nvdimm fixes from Dan Williams:
- Fix a compile error in the nvdimm unit tests
- Fix a shadowed variable warning in the CXL PCI driver
* tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
cxl/pci: Drop shadowed variable
tools/testing/nvdimm: Fix security_init() symbol collision
The guest_hang() function is used as the default exception handler
for various KVM selftests applications by setting it's address in
the vstvec CSR. The vstvec CSR requires exception handler base address
to be at least 4-byte aligned so this patch fixes alignment of the
guest_hang() function.
Fixes: 3e06cdf105 ("KVM: selftests: Add initial support for RISC-V
64-bit")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Supporting hardware updates of PTE A and D bits is optional for any
RISC-V implementation so current software strategy is to always set
these bits in both G-stage (hypervisor) and VS-stage (guest kernel).
If PTE A and D bits are not set by software (hypervisor or guest)
then RISC-V implementations not supporting hardware updates of these
bits will cause traps even for perfectly valid PTEs.
Based on above explanation, the VS-stage page table created by various
KVM selftest applications is not correct because PTE A and D bits are
not set. This patch fixes VS-stage page table programming of PTE A and
D bits for KVM selftests.
Fixes: 3e06cdf105 ("KVM: selftests: Add initial support for RISC-V
64-bit")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-09
We've added 63 non-merge commits during the last 9 day(s) which contain
a total of 68 files changed, 4852 insertions(+), 619 deletions(-).
The main changes are:
1) Add libbpf support for USDT (User Statically-Defined Tracing) probes.
USDTs are an abstraction built on top of uprobes, critical for tracing
and BPF, and widely used in production applications, from Andrii Nakryiko.
2) While Andrii was adding support for x86{-64}-specific logic of parsing
USDT argument specification, Ilya followed-up with USDT support for s390
architecture, from Ilya Leoshkevich.
3) Support name-based attaching for uprobe BPF programs in libbpf. The format
supported is `u[ret]probe/binary_path:[raw_offset|function[+offset]]`, e.g.
attaching to libc malloc can be done in BPF via SEC("uprobe/libc.so.6:malloc")
now, from Alan Maguire.
4) Various load/store optimizations for the arm64 JIT to shrink the image
size by using arm64 str/ldr immediate instructions. Also enable pointer
authentication to verify return address for JITed code, from Xu Kuohai.
5) BPF verifier fixes for write access checks to helper functions, e.g.
rd-only memory from bpf_*_cpu_ptr() must not be passed to helpers that
write into passed buffers, from Kumar Kartikeya Dwivedi.
6) Fix overly excessive stack map allocation for its base map structure and
buckets which slipped-in from cleanups during the rlimit accounting removal
back then, from Yuntao Wang.
7) Extend the unstable CT lookup helpers for XDP and tc/BPF to report netfilter
connection tracking tuple direction, from Lorenzo Bianconi.
8) Improve bpftool dump to show BPF program/link type names, Milan Landaverde.
9) Minor cleanups all over the place from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (63 commits)
bpf: Fix excessive memory allocation in stack_map_alloc()
selftests/bpf: Fix return value checks in perf_event_stackmap test
selftests/bpf: Add CO-RE relos into linked_funcs selftests
libbpf: Use weak hidden modifier for USDT BPF-side API functions
libbpf: Don't error out on CO-RE relos for overriden weak subprogs
samples, bpf: Move routes monitor in xdp_router_ipv4 in a dedicated thread
libbpf: Allow WEAK and GLOBAL bindings during BTF fixup
libbpf: Use strlcpy() in path resolution fallback logic
libbpf: Add s390-specific USDT arg spec parsing logic
libbpf: Make BPF-side of USDT support work on big-endian machines
libbpf: Minor style improvements in USDT code
libbpf: Fix use #ifdef instead of #if to avoid compiler warning
libbpf: Potential NULL dereference in usdt_manager_attach_usdt()
selftests/bpf: Uprobe tests should verify param/return values
libbpf: Improve string parsing for uprobe auto-attach
libbpf: Improve library identification for uprobe binary path resolution
selftests/bpf: Test for writes to map key from BPF helpers
selftests/bpf: Test passing rdonly mem to global func
bpf: Reject writes for PTR_TO_MAP_KEY in check_helper_mem_access
bpf: Check PTR_TO_MEM | MEM_RDONLY in check_helper_mem_access
...
====================
Link: https://lore.kernel.org/r/20220408231741.19116-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bpf_get_stackid() function may also return 0 on success as per UAPI BPF
helper documentation. Therefore, correct checks from 'val > 0' to 'val >= 0'
to ensure that they cover all possible success return values.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220408041452.933944-1-ytcoode@gmail.com
Add CO-RE relocations into __weak subprogs for multi-file linked_funcs
selftest to make sure libbpf handles such combination well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220408181425.2287230-4-andrii@kernel.org
Starting with the new perf-event support in the nvdimm core, the
nfit_test mock module stops compiling. Rename its security_init() to
nfit_security_init().
tools/testing/nvdimm/test/nfit.c:1845:13: error: conflicting types for ‘security_init’; have ‘void(struct nfit_test *)’
1845 | static void security_init(struct nfit_test *t)
| ^~~~~~~~~~~~~
In file included from ./include/linux/perf_event.h:61,
from ./include/linux/nd.h:11,
from ./drivers/nvdimm/nd-core.h:11,
from tools/testing/nvdimm/test/nfit.c:19:
Fixes: 9a61d0838c ("drivers/nvdimm: Add nvdimm pmu structure")
Cc: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/164904238610.1330275.1889212115373993727.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
uprobe/uretprobe tests don't do any validation of arguments/return values,
and without this we can't be sure we are attached to the right function,
or that we are indeed attached to a uprobe or uretprobe. To fix this
record argument and return value for auto-attached functions and ensure
these match expectations. Also need to filter by pid to ensure we do
not pick up stray malloc()s since auto-attach traces libc system-wide.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1649245431-29956-4-git-send-email-alan.maguire@oracle.com
In order to correctly destroy a VM, all references to the VM must be
freed. The arch_timer selftest creates a VGIC for the guest, which
itself holds a reference to the VM.
Close the GIC FD when cleaning up a VM.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220406235615.1447180-4-oupton@google.com
dirty_log_perf_test instantiates a VGICv3 for the guest (if supported by
hardware) to reduce the overhead of guest exits. However, the test does
not actually close the GIC fd when cleaning up the VM between test
iterations, meaning that the VM is never actually destroyed in the
kernel.
While this is generally a bad idea, the bug was detected from the kernel
spewing about duplicate debugfs entries as subsequent VMs happen to
reuse the same FD even though the debugfs directory is still present.
Abstract away the notion of setup/cleanup of the GIC FD from the test
by creating arch-specific helpers for test setup/cleanup. Close the GIC
FD on VM cleanup and do nothing for the other architectures.
Fixes: c340f7899a ("KVM: selftests: Add vgic initialization for dirty log perf test for ARM")
Reviewed-by: Jing Zhang <jingzhangos@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220406235615.1447180-3-oupton@google.com
When testing a kernel with commit a5905d6af4 ("KVM: arm64:
Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated")
get-reg-list output
vregs: Number blessed registers: 234
vregs: Number registers: 238
vregs: There are 1 new registers.
Consider adding them to the blessed reg list with the following lines:
KVM_REG_ARM_FW_REG(3),
vregs: PASS
...
That output inspired two changes: 1) add the new register to the
blessed list and 2) explain why "Number registers" is actually four
larger than "Number blessed registers" (on the system used for
testing), even though only one register is being stated as new.
The reason is that some registers are host dependent and they get
filtered out when comparing with the blessed list. The system
used for the test apparently had three filtered registers.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220316125129.392128-1-drjones@redhat.com
Alexei Starovoitov says:
====================
pull-request: bpf 2022-04-06
We've added 8 non-merge commits during the last 8 day(s) which contain
a total of 9 files changed, 139 insertions(+), 36 deletions(-).
The main changes are:
1) rethook related fixes, from Jiri and Masami.
2) Fix the case when tracing bpf prog is attached to struct_ops, from Martin.
3) Support dual-stack sockets in bpf_tcp_check_syncookie, from Maxim.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets
bpf: Support dual-stack sockets in bpf_tcp_check_syncookie
bpf: selftests: Test fentry tracing a struct_ops program
bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT
rethook: Fix to use WRITE_ONCE() for rethook:: Handler
selftests/bpf: Fix warning comparing pointer to 0
bpf: Fix sparse warnings in kprobe_multi_resolve_syms
bpftool: Explicit errno handling in skeletons
====================
Link: https://lore.kernel.org/r/20220407031245.73026-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When invoking bpf_for_each_map_elem callback, we are passed a
PTR_TO_MAP_KEY, previously writes to this through helper may be allowed,
but the fix in previous patches is meant to prevent that case. The test
case tries to pass it as writable memory to helper, and fails test if it
succeeds to pass the verifier.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220319080827.73251-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add two test cases, one pass read only map value pointer to global
func, which should be rejected. The same code checks it for kfunc, so
that is covered as well. Second one tries to use the missing check for
PTR_TO_MEM's MEM_RDONLY flag and tries to write to a read only memory
pointer. Without prior patches, both of these tests fail.
Reviewed-by: Hao Luo <haoluo@google.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220319080827.73251-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_map_value_size() uses num_possible_cpus() to determine map size, but
some of the tests only allocate enough memory for online cpus. This
results in out-of-bound writes in userspace during bpf(BPF_MAP_LOOKUP_ELEM)
syscalls in cases when number of online cpus is lower than the number of
possible cpus. Fix by switching from get_nprocs_conf() to
bpf_num_possible_cpus() when determining the number of processors in
these tests (test_progs/netcnt and test_cgroup_storage).
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220406085408.339336-1-asavkov@redhat.com
The function does not check that parsing_end is false after parsing
argument. Thus, if the final part of the argument is something like '4-',
which is invalid, parse_num_list() will discard it instead of returning
-EINVAL.
Before:
$ ./test_progs -n 2,4-
#2 atomic_bounds:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
After:
$ ./test_progs -n 2,4-
Failed to parse test numbers.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220406003622.73539-1-ytcoode@gmail.com
The previous commit fixed support for dual-stack sockets in
bpf_tcp_check_syncookie. This commit adjusts the selftest to verify the
fixed functionality.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Arthur Fabre <afabre@cloudflare.com>
Link: https://lore.kernel.org/bpf/20220406124113.2795730-2-maximmi@nvidia.com
Introduce a test for aarch64 that ensures non-mixed-width vCPUs
(all 64bit vCPUs or all 32bit vcPUs) can be configured, and
mixed-width vCPUs cannot be configured.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220329031924.619453-3-reijiw@google.com
Extend urandom_read helper binary to include USDTs of 4 combinations:
semaphore/semaphoreless (refcounted and non-refcounted) and based in
executable or shared library. We also extend urandom_read with ability
to report it's own PID to parent process and wait for parent process to
ready itself up for tracing urandom_read. We utilize popen() and
underlying pipe properties for proper signaling.
Once urandom_read is ready, we add few tests to validate that libbpf's
USDT attachment handles all the above combinations of semaphore (or lack
of it) and static or shared library USDTs. Also, we validate that libbpf
handles shared libraries both with PID filter and without one (i.e., -1
for PID argument).
Having the shared library case tested with and without PID is important
because internal logic differs on kernels that don't support BPF
cookies. On such older kernels, attaching to USDTs in shared libraries
without specifying concrete PID doesn't work in principle, because it's
impossible to determine shared library's load address to derive absolute
IPs for uprobe attachments. Without absolute IPs, it's impossible to
perform correct look up of USDT spec based on uprobe's absolute IP (the
only kind available from BPF at runtime). This is not the problem on
newer kernels with BPF cookie as we don't need IP-to-ID lookup because
BPF cookie value *is* spec ID.
So having those two situations as separate subtests is good because
libbpf CI is able to test latest selftests against old kernels (e.g.,
4.9 and 5.5), so we'll be able to disable PID-less shared lib attachment
for old kernels, but will still leave PID-specific one enabled to validate
this legacy logic is working correctly.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20220404234202.331384-8-andrii@kernel.org
Add semaphore-based USDT to test_progs itself and write basic tests to
valicate both auto-attachment and manual attachment logic, as well as
BPF-side functionality.
Also add subtests to validate that libbpf properly deduplicates USDT
specs and handles spec overflow situations correctly, as well as proper
"rollback" of partially-attached multi-spec USDT.
BPF-side of selftest intentionally consists of two files to validate
that usdt.bpf.h header can be included from multiple source code files
that are subsequently linked into final BPF object file without causing
any symbol duplication or other issues. We are validating that __weak
maps and bpf_usdt_xxx() API functions defined in usdt.bpf.h do work as
intended.
USDT selftests utilize sys/sdt.h header that on Ubuntu systems comes
from systemtap-sdt-devel package. But to simplify everyone's life,
including CI but especially casual contributors to bpf/bpf-next that
are trying to build selftests, I've checked in sys/sdt.h header from [0]
directly. This way it will work on all architectures and distros without
having to figure it out for every relevant combination and adding any
extra implicit package dependencies.
[0] https://sourceware.org/git?p=systemtap.git;a=blob_plain;f=includes/sys/sdt.h;h=ca0162b4dc57520b96638c8ae79ad547eb1dd3a1;hb=HEAD
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20220404234202.331384-7-andrii@kernel.org
Before, our help output contained lines like
--kconfig_add KCONFIG_ADD
--qemu_config qemu_config
--jobs jobs
They're not very helpful.
The former kind come from the automatic 'metavar' we get from argparse,
the uppercase version of the flag name.
The latter are where we manually specified metavar as the flag name.
After:
--build_dir DIR
--make_options X=Y
--kunitconfig PATH
--kconfig_add CONFIG_X=Y
--arch ARCH
--cross_compile PREFIX
--qemu_config FILE
--jobs N
--timeout SECONDS
--raw_output [{all,kunit}]
--json [FILE]
This patch tries to make the code more clear by specifying the _type_ of
input we expect, e.g. --build_dir is a DIR, --qemu_config is a FILE.
I also switched it to uppercase since it looked more clearly like
placeholder text that way.
This patch also changes --raw_output to specify `choices` to make it
more clear what the options are, and this way argparse can validate it
for us, as shown by the added test case.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
attach_probe selftest fails on aarch64 with `failed to create kprobe
'sys_nanosleep+0x0' perf event: No such file or directory`. This is
because, like on several other architectures, nanosleep has a prefix.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220404142101.27900-1-iii@linux.ibm.com
The script for checking that various lists of types in bpftool remain in
sync with the UAPI BPF header uses a regex to parse enum bpf_prog_type.
If this enum contains a set of values different from the list of program
types in bpftool, it complains.
This script should have reported the addition, some time ago, of the new
BPF_PROG_TYPE_SYSCALL, which was not reported to bpftool's program types
list. It failed to do so, because it failed to parse that new type from
the enum. This is because the new value, in the BPF header, has an
explicative comment on the same line, and the regex does not support
that.
Let's update the script to support parsing enum values when they have
comments on the same line.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220404140944.64744-1-quentin@isovalent.com
Filling log files with color codes makes diffs and other comparisons
difficult. Only emit vt100 codes when the stdout is a TTY.
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: linux-kselftest@vger.kernel.org
Cc: kunit-dev@googlegroups.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Before, kunit.py always printed "arch": "UM" in its json output, but...
1. With `kunit.py parse`, we could be parsing output from anywhere, so
we can't say that.
2. Capitalizing it is probably wrong, as it's `ARCH=um`
3. Commit 87c9c16317 ("kunit: tool: add support for QEMU") made it so
kunit.py could knowingly run a different arch, yet we'd still always
claim "UM".
This patch addresses all of those. E.g.
1.
$ ./tools/testing/kunit/kunit.py parse .kunit/test.log --json | grep -o '"arch.*' | sort -u
"arch": "",
2.
$ ./tools/testing/kunit/kunit.py run --json | ...
"arch": "um",
3.
$ ./tools/testing/kunit/kunit.py run --json --arch=x86_64 | ...
"arch": "x86_64",
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When using --json, kunit.py run/exec/parse will produce results in
KernelCI json format.
As part of that, we include the build_dir that was used, and we
(incorrectly) hardcode in the arch, etc.
We'll want a way to plumb more values (as well as the correct `arch`),
so this patch groups those fields into kunit_json.Metadata type.
This patch should have no user visible changes.
And since we only used build_dir in KunitParseRequest for json, we can
now move it out of that struct and add it into KunitExecRequest, which
needs it and used to get it via inheritance.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use a more idiomatic check that a list is non-empty (`if mylist:`) and
simplify the function body by dedenting and using a dict to map between
the kunit TestStatus enum => KernelCI json status string.
The dict hopefully makes it less likely to have bugs like commit
9a6bb30a88 ("kunit: tool: fix --json output for skipped tests").
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
--build_dir is set to a default of '.kunit' since commit ddbd60c779
("kunit: use --build_dir=.kunit as default"), but even before then it
was explicitly set to ''.
So outside of one unit test, there was no way for the build_dir to be
ever be None, and we can simplify code by fixing the unit test and
enforcing that via updated type annotations.
E.g. this lets us drop `get_file_path()` since it's now exactly
equivalent to os.path.join().
Note: there's some `if build_dir` checks that also fail if build_dir is
explicitly set to '' that just guard against passing "O=" to make.
But running `make O=` works just fine, so drop these checks.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
