Commit Graph

4086 Commits

Author SHA1 Message Date
Srinivas Neeli
85cab027d4 rtc: zynqmp: Updated calibration value
As per RTC spec default calibration value is 0x7FFF.
We are in process to update the 0x7FFF as default value in
the next version of TRM.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220626070817.3780977-2-srinivas.neeli@xilinx.com
2022-07-26 11:21:50 +02:00
Icenowy Zheng
b9d982385d rtc: sun6i: add support for R329 RTC
Allwinner R329 has a RTC with a similar time storage with H616 but a
slightly different clock part.

As we have already handled the R329 RTC clocks in the CCU driver, add a
compatible string to RTC driver to allow probing of the RTC.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220626042756.58961-1-samuel@sholland.org
2022-07-26 11:17:01 +02:00
keliu
592ff0c8d0 rtc: Directly use ida_alloc()/free()
Use ida_alloc()/ida_free() instead of deprecated
ida_simple_get()/ida_simple_remove() .

Signed-off-by: keliu <liuke94@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220527073636.2474546-1-liuke94@huawei.com
2022-06-24 21:44:53 +02:00
Nishanth Menon
b09d633575 rtc: Introduce ti-k3-rtc
Introduce support for Texas Instruments Real Time Clock controller on
newer K3 family of SoCs such as AM62x.

The hardware module that is being supported is the "digital only"
version which doesn't have capability of external wakeup sources and
external power backup. However, for many practical applications, this
should suffice as RTC is operational across low power sequences.

The hardware block by itself is split into two distinct domains
internally to further reduce the power consumption with the actual
counter block and comparators clocked off a 32k clock source (which
based on SoC integration can be sourced by an external crystal) and an
register interface block which is driven by the bus clock. While optimal
from power perspective, it does create some complicated synchronizations
and sequences that one must be wary of in the driver handling.

Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Georgi Vlaev <g-vlaev@ti.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220623170808.20998-3-nm@ti.com
2022-06-24 21:35:31 +02:00
Conor Dooley
0b31d70359 rtc: Add driver for Microchip PolarFire SoC
Add support for the built-in RTC on Microchip PolarFire SoC

Co-Developed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220601123320.2861043-2-conor.dooley@microchip.com
2022-06-24 21:24:02 +02:00
Stephen Kitt
3f4a332247 rtc: use simple i2c probe
All these drivers have an i2c probe function which doesn't use the
"struct i2c_device_id *id" parameter, so they can trivially be
converted to the "probe_new" style of probe with a single argument.

This change was done using the following Coccinelle script, and fixed
up for whitespace changes:

@ rule1 @
identifier fn;
identifier client, id;
@@

- static int fn(struct i2c_client *client, const struct i2c_device_id *id)
+ static int fn(struct i2c_client *client)
{
...when != id
}

@ rule2 depends on rule1 @
identifier rule1.fn;
identifier driver;
@@

struct i2c_driver driver = {
-	.probe
+	.probe_new
		=
(
		   fn
|
-		   &fn
+		   fn
)
		,
};

Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220610162346.4134094-1-steve@sk2.org
2022-06-24 21:24:02 +02:00
Tetsuo Handa
33740c7f94 rtc: Remove unused rtc_dev_exit().
Commit 270a3bd6bd ("rtc: make class.c explicitly non-modular")
removed rtc_dev_exit() call.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1e2f9a99-435d-e149-7456-dfacd53be85a@I-love.SAKURA.ne.jp
2022-06-24 21:24:02 +02:00
Tetsuo Handa
162b05524e rtc: Replace flush_scheduled_work() with flush_work().
Since "struct rtc_device" is per a device struct, I assume that clear_uie()
needs to wait for only one work associated with that device. Therefore,
wait for only that work using flush_work().

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/8d3a0f55-d861-ba93-0d25-b1172eaa8343@I-love.SAKURA.ne.jp
2022-06-24 21:24:02 +02:00
Quentin Schulz
2023c5c8fe rtc: isl1208: do not advertise update interrupt feature if no interrupt specified
If an ISL1208 device does not have an interrupt line routed, the feature
shouldn't be advertised (it is by default in rtc core) or it'll confuse
userspace requesting that feature (such as hwclock from util-linux).

Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220523145320.123713-1-foss+kernel@0leil.net
2022-06-24 21:24:02 +02:00
Ahmad Fatoum
c27fee16fa rtc: rv8803: re-initialize all Epson RX8803 registers on voltage loss
The reference manuals of both the RX8803 and RV8803 dictate that
"[On V2F/VLF = ] all registers must be initialized".

The RV-8803 application manual (rev. 1.6) further specifies that crossing
V_LOW2 threshold enables flag V2F and triggers a Power-On reset.
According to table 3.11 in the document, all control registers are
defined to sensible values.

However, The Epson RX-8803 doesn't offer the same guarantees.
It explicitly states:

  During the initial power-up, the TEST bit is reset to "0" and the VLF
  bit is set to "1".
  ∗ At this point, all other register values are _undefined_, so be sure to
  perform a reset before using the module.

Commit d3700b6b64 ("rtc: rv8803: Stop the clock while setting the time")
also had this rationale:

  Indeed, all the registers must be initialized if the voltage has been
  lower than VLOW2 (triggering V2F), but not low enough to trigger a POR.

We should follow the advice and initialize all applicable registers.
We can group the registers into 3 groups:

A) Already correctly handled registers:
  * 0B-0Ch | Timer Counter  | unused and disabled by clearing TE in 0Dh
  * 0Dh    | Extension Reg  | already initialized in rv8803_regs_configure
  * 0Eh    | Flag Reg       | handled in IRQ handler, except for VLF, VDET
  * 0Eh    | VLF, VDET      | cleared in ->set_time
  * 10h    | 100th Seconds  | Already reset via RESET bit
  * 20-21h | Capture Buffer | holds timestamp unused by driver
  * 2Fh    | Event Control  | resets automatically

B) Registers that are hardware initialized on POR, but not on VLF:
  * 0Fh    | Control Reg
  * 2Ch    | OSC Offset

C) RAM that is undefined on voltage loss:
  * 00-06h | Date/Time
  * 07h    | RAM
  * 08-0Ah | Alarm

This means we should initialize after VLF the registers in group B
(RV8803_CTRL and RV8803_OSC_OFFSET).

Group C is all-zero after voltage loss on the RV-8803, but undefined on
the RX-8803. This is ok for Date/Time because ->get_time returns an
error code for as long as the voltage loss flag is active. It's cleared
on ->set_time however. Zeroing both RAM and alarm ensures a fixed value
is read afterwards.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220426071056.1187235-4-s.hauer@pengutronix.de
2022-06-24 21:24:02 +02:00
Ahmad Fatoum
f8176e0bb8 rtc: rv8803: initialize registers on post-probe voltage loss
The driver probe currently initializes some registers to non-POR
values. These values are not reinstated if the RTC experiences voltage
loss later on. Fix this.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220426071056.1187235-3-s.hauer@pengutronix.de
2022-06-24 21:24:02 +02:00
Ahmad Fatoum
8c798e1ec1 rtc: rv8803: factor out existing register initialization to function
The driver probe currently initializes some registers to non-POR
values. These values are not reinstated if the RTC experiences voltage
loss later on. Prepare for fixing this by factoring out the
initialization to a separate function.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220426071056.1187235-2-s.hauer@pengutronix.de
2022-06-24 21:24:02 +02:00
Mateusz Jończyk
d2a632a8a1 rtc: mc146818-lib: reduce RTC_UIP polling period
Waiting 1ms every time is not necessary, for example on some AMD boxes
the RTC_UIP bit is documented as being high for around 270 microseconds
in some cases [1], which agreed with experiments on an SB710
southbridge. So 100us seems optimal.

This in preparation for mach_get_cmos_time() refactoring.
The functions mc146818_get_time() and mach_get_cmos_time() in
arch/x86/kernel/rtc.c perform the same function and the code is
duplicated. mach_get_cmos_time() is busy waiting for the RTC_UIP
bit to clear, so make mc146818_get_time() more similar to it by reducing
the polling period.

[1] AMD SB700/710/750 Register Reference Guide, page 307,
https://developer.amd.com/wordpress/media/2012/10/43009_sb7xx_rrg_pub_1.00.pdf

        "SB700 A12: The UIP high pulse is 270 μS Typical when SS on SRC
        clock is OFF and 100μ min when SRC SS is ON." [sic]

Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220225215011.861477-2-mat.jonczyk@o2.pl
2022-06-24 21:23:50 +02:00
Linus Torvalds
96479c0980 ARM: multiplatform changes, part 2
The second part of the multiplatform changes now converts the
 Intel/Marvell PXA platform along with the rest. The patches went through
 several rebases before the merge window as bugs were found, so they
 remained separate.
 
 This has to touch a lot of drivers, in particular the touchscreen,
 pcmcia, sound and clk bits, to detach the driver files from the
 platform and board specific header files.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmKZKqsACgkQmmx57+YA
 GNnO/w//dgJBlkmoIIKlG2eJsvoUKwDt7MuLEMCqSqYYUSvMENFwKK66INMDIJ3l
 PmKf94JadlpBm2OB2vzW+D1EtaLGX9eXZkKD+vyB1I1yFkKdzEPcAfitfrRwe58E
 pR4nQd/jVL4UCY+pp442O1q9VvMpMV9P4ILJGPS/PpsD5CT9Gn8m9svIIuNuDRFd
 nwpyZC3l32jVLo9iuLmwZUvxtOWI3hTqZrnxhByBhlvtnGexRsq/VhfubK2uzBi1
 CyWHjqzOSmseGmsUDwv9LFqVV9YRCeisS3IElA5L0VgM0XvHKA+f9qyF7V6zI20g
 y9LtqhdAtiTpE/aUrOW2LDYaM/bc7RilYZrWchoZbCEsHhV4C+ld3QoTyxvGscvG
 tbznhvZKdUNX8LHS0J9NqIj1q1YGN5ei5r/C5R8DBj1q8VcTVnq3dms8xzVTd35o
 xS5BbLFliiI96jc7S6LaQizXheYjAfdPhmXUAxNXvWIVQ6SXnf8/U/RB9Zzjb8hm
 FH2Gu8m/Dh2MHKBBRWSVw8VahV0V7WiEaWeYuwwTbW1wUrsWiizVaPnqrt6Cq9DW
 oJZgBvktWEXUQz73qrnvwo9GjcKqAxaWKWq05hHKHKuLGezsPAyIhIKr51V2xqqw
 cp2OIMCsN5GYENOhHvt6BMRAI5iA4VyFDtWAqw9B6EIwno6N7Z4=
 =cnSb
 -----END PGP SIGNATURE-----

Merge tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull more ARM multiplatform updates from Arnd Bergmann:
 "The second part of the multiplatform changes now converts the
  Intel/Marvell PXA platform along with the rest. The patches went
  through several rebases before the merge window as bugs were found, so
  they remained separate.

  This has to touch a lot of drivers, in particular the touchscreen,
  pcmcia, sound and clk bits, to detach the driver files from the
  platform and board specific header files"

* tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
  ARM: pxa/mmp: remove traces of plat-pxa
  ARM: pxa: convert to multiplatform
  ARM: pxa/sa1100: move I/O space to PCI_IOBASE
  ARM: pxa: remove support for MTD_XIP
  ARM: pxa: move mach/*.h to mach-pxa/
  ARM: PXA: fix multi-cpu build of xsc3
  ARM: pxa: move plat-pxa to drivers/soc/
  ARM: mmp: rename pxa_register_device
  ARM: mmp: remove tavorevb board support
  ARM: pxa: remove unused mach/bitfield.h
  ARM: pxa: move clk register definitions to driver
  ARM: pxa: move smemc register access from clk to platform
  cpufreq: pxa3: move clk register access to clk driver
  ARM: pxa: remove get_clk_frequency_khz()
  ARM: pxa: pcmcia: move smemc configuration back to arch
  ASoC: pxa: i2s: use normal MMIO accessors
  ASoC: pxa: ac97: use normal MMIO accessors
  ASoC: pxa: use pdev resource for FIFO regs
  Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops
  Input: wm97xx - switch to using threaded IRQ
  ...
2022-06-02 15:23:54 -07:00
Linus Torvalds
54eb8462f2 RTC for 5.19
New driver:
  - Renesas RZN1 rtc
 
 Drivers:
  - sun6i: Add nvmem support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmKX2rgACgkQY6TcMGxw
 OjJ0yw//bQY0gAQ4W1RghJ3NataBLVIiaxBpPYFSgSLA8xVj4vYNaQOn5ZAbn/yD
 a1Y+1QM3E71nNfSeuJWdF4UH52boyoBOMme0aowWjHXWIzbpRQnKo4hj15ViSrI5
 W0wcA3BNU6KbS/LzKyanN2l+Xw7rAdc/Q6AiWkj8PUjZJoSzwH6R0PSlYu9OGi2J
 CNUDENeS7uysBNvtXMUQxJD/hEXDpKMdKhnoy3l2uYDfMk1LV4vR+WlXzdDNW8VB
 0f9W5pD6TRNBJ/iDGXTLkTa7eDBwKuqJ+RFmzZ01KYQKcPr60VRBA6noAdaZbEiG
 veQWpURzp5J8QyzsWB8NfI/scJRUnIt0/oBtBLHeDtXBo3pcPpRGkHzjayQ0jnX7
 aJj/HUR6Bn9LE0UPN1UYyHY+Vf1JOfXr3tuXV9dpSBHlj99wGqW28Qs/29jFgHfy
 xQN2cfBSYE+0WPBss/nFwkff/OGBax/JpQfBkEYd95oYMiCw6HjFg2efO9yYw3+m
 tW5IoJLybfKzoD/N0VYn0D9TO2Lvf+1wC2jgxcFH8urZKKwAjPOb2L2rU1R56Hx/
 YHcQWOFaaHcZQLHDyT6/PSpMnhYiiFTbFswdYwq40Z9HkIjdclpKeYHOGDkpkiNA
 TB/aafw+NNXD47zOJxVR6Bxu2OBpupbXtvlXpHM0+qU2eszs2kw=
 =D9z8
 -----END PGP SIGNATURE-----

Merge tag 'rtc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "A new driver represents the bulk of the changes and then we get the
  usual small fixes.

  New driver:

   - Renesas RZN1 rtc

  Drivers:

   - sun6i: Add nvmem support"

* tag 'rtc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: mxc: Silence a clang warning
  rtc: rzn1: Fix a variable type
  rtc: rzn1: Fix error code in probe
  rtc: rzn1: Avoid mixing variables
  rtc: ftrtc010: Fix error handling in ftrtc010_rtc_probe
  rtc: mt6397: check return value after calling platform_get_resource()
  rtc: rzn1: fix platform_no_drv_owner.cocci warning
  rtc: gamecube: Add missing iounmap in gamecube_rtc_read_offset_from_sram
  rtc: meson: Fix email address in MODULE_AUTHOR
  rtc: simplify the return expression of rx8025_set_offset()
  rtc: pcf85063: Add a compatible entry for pca85073a
  dt-binding: pcf85063: Add an entry for pca85073a
  MAINTAINERS: Add myself as maintainer of the RZN1 RTC driver
  rtc: rzn1: Add oscillator offset support
  rtc: rzn1: Add alarm support
  rtc: rzn1: Add new RTC driver
  dt-bindings: rtc: rzn1: Describe the RZN1 RTC
  rtc: sun6i: Add NVMEM provider
2022-06-01 14:48:13 -07:00
Fabio Estevam
f78e3d407a rtc: mxc: Silence a clang warning
Change the of_device_get_match_data() cast to (uintptr_t)
to silence the following clang warning:

drivers/rtc/rtc-mxc.c:315:19: warning: cast to smaller integer type 'enum imx_rtc_type' from 'const void *' [-Wvoid-pointer-to-enum-cast]

Reported-by: kernel test robot <lkp@intel.com>
Fixes: ba7aa63000 ("rtc: mxc: use of_device_get_match_data")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220526011459.1167197-1-festevam@gmail.com
2022-06-01 23:19:17 +02:00
Miquel Raynal
3f34892489 rtc: rzn1: Fix a variable type
The calculation in ->set_offset() handles both negative and positive
offsets. The 'steps' variable will be checked to be in a specific [-x;
+x] range, which means it must be a signed integer rather than
unsigned.

This also fixes the following smatch warning:

     warn: 'steps' 'true' implies 'steps > 0' is 'true'

Fixes: be4a11cf98 ("rtc: rzn1: Add oscillator offset support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220520082500.489248-1-miquel.raynal@bootlin.com
2022-05-25 01:24:21 +02:00
Dan Carpenter
0b6da78513 rtc: rzn1: Fix error code in probe
There is a copy and paste error so this code returns the wrong variable.

Fixes: deeb4b5393 ("rtc: rzn1: Add new RTC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/YoZMg1dmHHSJEfE9@kili
2022-05-25 01:22:16 +02:00
Miquel Raynal
64d69b5daf rtc: rzn1: Avoid mixing variables
In the ->set_offset() callback, the 'val' variable is used for two
different purposes at the same time, which is oviously wrong:
- It contains the intermediate value of the SUBU register that must be
  written at the end of ->set_offset().
- It is used in the middle of the above calculations to poll the CTL2
  register for a specific value.

Let's introduce a 'ctl2' variable just for the readl_poll_timeout()
call and use it there in place of 'var'.

In order to avoid mixing those two variables again, let's rename the
remaining occurences of 'val' into 'subu' and initialize it to 0 to
avoid the uninitialized variable situation reported by Tom Rix and Colin
Ian King already.

Fixes: be4a11cf98 ("rtc: rzn1: Add oscillator offset support")
Reported-by: Tom Rix <trix@redhat.com>
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220520082221.488849-1-miquel.raynal@bootlin.com
2022-05-25 01:19:12 +02:00
Linus Torvalds
fdd8f6585c m68k updates for v5.19
- Introduce virtual m68k machine based on Android Goldfish devices,
   - Defconfig updates,
   - Minor fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYotRMhUcZ2VlcnRAbGlu
 dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XDFmgD/ZFTY4HashrodaQQLeRnwF1e2fDSY
 yvpDfaJJf9vJY0kBAM/yflOMfPHeUOe1rLY0twevuZTgDUIv4f+Oi+9jtYUN
 =ccFr
 -----END PGP SIGNATURE-----

Merge tag 'm68k-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

Pull m68k updates from Geert Uytterhoeven:

  - Introduce virtual m68k machine based on Android Goldfish devices

  - defconfig updates

  - Minor fixes and improvements

* tag 'm68k-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: atari: Make Atari ROM port I/O write macros return void
  m68k: math-emu: Fix dependencies of math emulation support
  m68k: math-emu: Fix typos in comments
  m68k: Wire up syscall_trace_enter/leave for m68k
  m68k: defconfig: Update defconfigs for v5.18-rc1
  m68k: Introduce a virtual m68k machine
  clocksource/drivers: Add a goldfish-timer clocksource
  rtc: goldfish: Use gf_ioread32()/gf_iowrite32()
  tty: goldfish: Introduce gf_ioread32()/gf_iowrite32()
2022-05-23 20:56:17 -07:00
Miaoqian Lin
b520cbe5be rtc: ftrtc010: Fix error handling in ftrtc010_rtc_probe
In the error handling path, the clk_prepare_enable() function
call should be balanced by a corresponding 'clk_disable_unprepare()'
call , as already done in the remove function.

clk_disable_unprepare calls clk_disable() and clk_unprepare().
They will use IS_ERR_OR_NULL to check the argument.

Fixes: ac05fba39c ("rtc: gemini: Add optional clock handling")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220403054912.31739-1-linmq006@gmail.com
2022-05-19 12:08:17 +02:00
Yang Yingliang
d3b43eb505 rtc: mt6397: check return value after calling platform_get_resource()
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Fixes: fc2979118f ("rtc: mediatek: Add MT6397 RTC driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220505125043.1594771-1-yangyingliang@huawei.com
2022-05-19 12:05:48 +02:00
Yang Li
e60e8a7323 rtc: rzn1: fix platform_no_drv_owner.cocci warning
Remove .owner field if calls are used which set it automatically.
./drivers/rtc/rtc-rzn1.c:411:3-8: No need to set .owner here. The core
will do it.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220518232445.79156-1-yang.lee@linux.alibaba.com
2022-05-19 11:19:30 +02:00
Yuan Can
6ddabcb106 rtc: gamecube: Add missing iounmap in gamecube_rtc_read_offset_from_sram
The hw_srnprot needs to be unmapped when gamecube_rtc_read_offset_from_sram returns.

Fixs: 86559400b3 (rtc: gamecube: Add a RTC driver for the GameCube, Wii and Wii U)
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220511071354.46202-1-yuancan@huawei.com
2022-05-18 14:52:17 +02:00
Nobuhiro Iwamatsu
a37bdde620 rtc: meson: Fix email address in MODULE_AUTHOR
Ben Dooks's email address is <ben.dooks@codethink.co.uk>.
Fix Ben Dooks's email address in MODULE_AUTHOR.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220506232850.220582-1-nobuhiro1.iwamatsu@toshiba.co.jp
2022-05-18 00:20:39 +02:00
Minghao Chi
bce7a01ada rtc: simplify the return expression of rx8025_set_offset()
Simplify the return expression.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220505022314.59822-1-chi.minghao@zte.com.cn
2022-05-18 00:18:19 +02:00
Fabio Estevam
aabfe05a82 rtc: pcf85063: Add a compatible entry for pca85073a
The PCA85073A RTC has the same programming model as the PCF85063A.

Add a compatible entry for it.

Tested on a custom i.MX6SX based board.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220419014445.341444-2-festevam@gmail.com
2022-05-18 00:15:50 +02:00
Miquel Raynal
be4a11cf98 rtc: rzn1: Add oscillator offset support
The RZN1 RTC can compensate the imprecision of the oscillator up to
approximately 190ppm.

Seconds can last slightly shorter or longer depending on the
configuration.

Below ~65ppm of correction, we can change the time spent in a second
every minute, which is the most accurate compensation that the RTC can
offer. Above, the compensation will be active every 20s.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220516082504.33913-5-miquel.raynal@bootlin.com
2022-05-17 23:11:44 +02:00
Miquel Raynal
b5ad1bf00d rtc: rzn1: Add alarm support
The RZN1 RTC can trigger an interrupt when reaching a particular date up
to 7 days ahead. Bring support for this alarm.

One drawback though, the granularity is about a minute.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220516082504.33913-4-miquel.raynal@bootlin.com
2022-05-17 23:11:44 +02:00
Michel Pollet
deeb4b5393 rtc: rzn1: Add new RTC driver
Add a basic RTC driver for the RZ/N1.

Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com>
Co-developed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220516082504.33913-3-miquel.raynal@bootlin.com
2022-05-17 23:11:44 +02:00
Samuel Holland
581d6d8f48 rtc: sun6i: Add NVMEM provider
The sun6i RTC provides 32 bytes of general-purpose data registers.
They can be used to save data in the always-on RTC power domain.
The registers are writable via 32-bit MMIO accesses only.

Expose them with a NVMEM provider so they can be used by other drivers.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220413231731.56709-1-samuel@sholland.org
2022-05-17 22:49:24 +02:00
Jernej Skrabec
60d9f050da Revert "clk: sunxi-ng: sun6i-rtc: Add support for H6"
This reverts commit 1738890a31.

Commit 1738890a31 ("clk: sunxi-ng: sun6i-rtc: Add support for H6")
breaks HDMI output on Tanix TX6 mini board. Exact reason isn't known,
but because that commit doesn't actually improve anything, let's just
revert it.

Cc: stable@vger.kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220511200206.2458274-1-jernej.skrabec@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-17 00:25:57 -07:00
Arnd Bergmann
08d3df8c81 ARM: pxa: split up mach/hardware.h
The mach/hardware.h is included in lots of places, and it provides
three different things on pxa:

- the cpu_is_pxa* macros
- an indirect inclusion of mach/addr-map.h
- the __REG() and io_pv2() helper macros

Split it up into separate <linux/soc/pxa/cpu.h> and mach/pxa-regs.h
headers, then change all the files that use mach/hardware.h to
include the exact set of those three headers that they actually
need, allowing for further more targeted cleanup.

linux/soc/pxa/cpu.h can remain permanently exported and is now in
a global location along with similar headers. pxa-regs.h and
addr-map.h are only used in a very small number of drivers now
and can be moved to arch/arm/mach-pxa/ directly when those drivers
are to pass the necessary data as resources.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-19 16:27:05 +02:00
Laurent Vivier
c92e7ef164 clocksource/drivers: Add a goldfish-timer clocksource
Add a clocksource based on the goldfish-rtc device.

Move the timer register definition to <clocksource/timer-goldfish.h>

This kernel implementation is based on the QEMU upstream implementation:

   https://git.qemu.org/?p=qemu.git;a=blob_plain;f=hw/rtc/goldfish_rtc.c

goldfish-timer is a high-precision signed 64-bit nanosecond timer.
It is part of the 'goldfish' virtual hardware platform used to run
some emulated Android systems under QEMU.
This timer only supports oneshot event.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220406201523.243733-4-laurent@vivier.eu
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2022-04-11 11:48:01 +02:00
Laurent Vivier
3378c7f48f rtc: goldfish: Use gf_ioread32()/gf_iowrite32()
Replace readl()/writel() by gf_ioread32()/gf_iowrite32()
as done for goldfish-tty.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220406201523.243733-3-laurent@vivier.eu
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2022-04-11 11:48:01 +02:00
Linus Torvalds
6a34fdcca4 RTC for 5.18
Subsystem:
  - remove uie_unsupported, all users have been converted to clear
    RTC_FEATURE_UPDATE_INTERRUPT and provide a reason
  - RTCs with an alarm with a resolution of a minute are now letting the core
    handle rounding down the alarm time
  - fix use-after-free on device removal
 
 New driver:
  - OP-TEE RTC PTA
 
 Drivers:
  - sun6i: Add H616 support
  - cmos: Fix the AltCentury for AMD platforms
  - spear: set range
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmJGJ0wACgkQY6TcMGxw
 OjKAXQ/9EId70uY/kUQv2Ay2+NysfSFYpDoerf1V55vGyN+n/pxX14bUxTx0Ivse
 47ROcWSP94MSw9cExNvujkpY/V6xaQI3/jxWC60f5ngHzAwIArmmDdWMSLDmRJYi
 mg07Hp9bSTIgXVzBdlAJc6vSRDmznKB44TTrz6GvulLJROAy9jNJwefuxwsV9Ftl
 I6PcRtYGn5poPpp7yLi1IZ1m0gWJJVze9IsJWJjTRSzh9xAYnjOsMR5H8fyMLjh9
 1KjiHwV1c5En4HtrMrYPXOdeLTgNfCdfHaLRRhZRSE+dTK4551TbYbeG2GtKWkdR
 Xvybwik2kghde8+/sh6hhg59NGkfMkzLByc41P0VWfDEscyi3z+YXot2OOV+FfkI
 XpDPab+a2IQaGFYEa4sGVloFP4e9er5uRHRPkT6bX07plACMwV1wLSRqCK/RriV6
 HYImdP7/aA4t/OlmVdliyiyOZfO+oHX/z8hhkNbTJc5HpvgViDEKKEsOEef6OcRh
 j+p8ej6iaVt1wjYpfghHYanFzVPi98zGH0QMS9GmHbS+VetGYxzUVyKgzAsOMwYA
 RwTunNkQQqgiz+C4n2s/PDD4ZuNDFDFaEE+3RReaw/9LGkR007TCxwcNBEGde+B6
 1W4B9tNMGLI/hHulv7WYNrP/5Y/QPEuPiu+FxhwpNm5tDg1Ur70=
 =7E0a
 -----END PGP SIGNATURE-----

Merge tag 'rtc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "The bulk of the patches are about replacing the uie_unsupported struct
  rtc_device member by a feature bit.

  Subsystem:

   - remove uie_unsupported, all users have been converted to clear
     RTC_FEATURE_UPDATE_INTERRUPT and provide a reason

   - RTCs with an alarm with a resolution of a minute are now letting
     the core handle rounding down the alarm time

   - fix use-after-free on device removal

  New driver:

   - OP-TEE RTC PTA

  Drivers:

   - sun6i: Add H616 support

   - cmos: Fix the AltCentury for AMD platforms

   - spear: set range"

* tag 'rtc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (56 commits)
  rtc: check if __rtc_read_time was successful
  rtc: gamecube: Fix refcount leak in gamecube_rtc_read_offset_from_sram
  rtc: mc146818-lib: Fix the AltCentury for AMD platforms
  rtc: optee: add RTC driver for OP-TEE RTC PTA
  rtc: pm8xxx: Return -ENODEV if set_time disallowed
  rtc: pm8xxx: Attach wake irq to device
  clk: sunxi-ng: sun6i-rtc: include clk/sunxi-ng.h
  rtc: remove uie_unsupported
  rtc: xgene: stop using uie_unsupported
  rtc: hym8563: switch to RTC_FEATURE_UPDATE_INTERRUPT
  rtc: hym8563: let the core handle the alarm resolution
  rtc: hym8563: switch to devm_rtc_allocate_device
  rtc: efi: switch to RTC_FEATURE_UPDATE_INTERRUPT
  rtc: efi: switch to devm_rtc_allocate_device
  rtc: add new RTC_FEATURE_ALARM_WAKEUP_ONLY feature
  rtc: spear: fix spear_rtc_read_time
  rtc: spear: drop uie_unsupported
  rtc: spear: set range
  rtc: spear: switch to devm_rtc_allocate_device
  rtc: pcf8563: switch to RTC_FEATURE_UPDATE_INTERRUPT
  ...
2022-04-01 09:37:18 -07:00
Tom Rix
915593a7a6 rtc: check if __rtc_read_time was successful
Clang static analysis reports this issue
interface.c:810:8: warning: Passed-by-value struct
  argument contains uninitialized data
  now = rtc_tm_to_ktime(tm);
      ^~~~~~~~~~~~~~~~~~~

tm is set by a successful call to __rtc_read_time()
but its return status is not checked.  Check if
it was successful before setting the enabled flag.
Move the decl of err to function scope.

Fixes: 2b2f5ff00f ("rtc: interface: ignore expired timers when enqueuing new timers")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220326194236.2916310-1-trix@redhat.com
2022-03-29 22:45:50 +02:00
Miaoqian Lin
4b2dc39ca0 rtc: gamecube: Fix refcount leak in gamecube_rtc_read_offset_from_sram
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.

Fixes: 86559400b3 ("rtc: gamecube: Add a RTC driver for the GameCube, Wii and Wii U")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220309092225.6930-1-linmq006@gmail.com
2022-03-29 22:45:50 +02:00
Mario Limonciello
3ae8fd4157 rtc: mc146818-lib: Fix the AltCentury for AMD platforms
Setting the century forward has been failing on AMD platforms.
There was a previous attempt at fixing this for family 0x17 as part of
commit 7ad295d519 ("rtc: Fix the AltCentury value on AMD/Hygon
platform") but this was later reverted due to some problems reported
that appeared to stem from an FW bug on a family 0x17 desktop system.

The same comments mentioned in the previous commit continue to apply
to the newer platforms as well.

```
MC146818 driver use function mc146818_set_time() to set register
RTC_FREQ_SELECT(RTC_REG_A)'s bit4-bit6 field which means divider stage
reset value on Intel platform to 0x7.

While AMD/Hygon RTC_REG_A(0Ah)'s bit4 is defined as DV0 [Reference]:
DV0 = 0 selects Bank 0, DV0 = 1 selects Bank 1. Bit5-bit6 is defined
as reserved.

DV0 is set to 1, it will select Bank 1, which will disable AltCentury
register(0x32) access. As UEFI pass acpi_gbl_FADT.century 0x32
(AltCentury), the CMOS write will be failed on code:
CMOS_WRITE(century, acpi_gbl_FADT.century).

Correct RTC_REG_A bank select bit(DV0) to 0 on AMD/Hygon CPUs, it will
enable AltCentury(0x32) register writing and finally setup century as
expected.
```

However in closer examination the change previously submitted was also
modifying bits 5 & 6 which are declared reserved in the AMD documentation.
So instead modify just the DV0 bank selection bit.

Being cognizant that there was a failure reported before, split the code
change out to a static function that can also be used for exclusions if
any regressions such as Mikhail's pop up again.

Cc: Jinke Fan <fanjinke@hygon.cn>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/all/CABXGCsMLob0DC25JS8wwAYydnDoHBSoMh2_YLPfqm3TTvDE-Zw@mail.gmail.com/
Link: https://www.amd.com/system/files/TechDocs/51192_Bolton_FCH_RRG.pdf
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220111225750.1699-1-mario.limonciello@amd.com
2022-03-29 22:45:31 +02:00
Linus Torvalds
8350e8331b - New Drivers
- Add support for Maxim MAX77714 PMIC
 
  - Remove Drivers
    - Remove support for ST-Ericsson AB8500 DebugFS
 
  - New Device Support
    - Add support for Silergy SY7636A to Simple MFD I2C
    - Add support for MediaTek MT6366 PMIC to MT6358 IRQ
    - Add support for Charger to Intel PMIC CRC
    - Add support for Raptor Lake to Intel LPSS PCI
 
  - New Functionality
    - Add support for Reboot to Rockchip RK808
 
  - Fix-ups
    - Device Tree changes (inc. YAML conversion); silergy,sy7636a, maxim,max77843,
                                   google,cros-ec, maxim,max14577, maxim,max77802,
 				  maxim,max77714, qcom,tcsr, qcom,spmi-pmic,
 				  stericsson,ab8500, stericsson,db8500-prcmu,
 				  samsung,exynos5433-lpass, mt6397, syscon, brcm,cru
    - Visible to menuconfig; simple-mfd-i2c
    - Clean-up or clarify code; max77686, intel_soc_pmic_crc
    - Improve error handling; mc13xxx-core, stmfx, asic3
    - Pass device information to child devices; iqs62x, intel-lpss-acpi
    - Individually identify IRQ domains; intel_soc_pmic_core
    - Remove superfluous code; dbx500-prcmu, exynos-lpass
    - Staticify and constify; arizona-i2c
    - Mark sometimes used data as __maybe_unused; atmel-flexcom
    - Account for different ACPI tables on AOSP/Windows platforms; arizona-spi
    - Use provided (platform) APIs; ab8500-core
    - Trivial (whitespace, spelling); rohm-bd9576
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmI9n1YACgkQUa+KL4f8
 d2F59RAAi3zTun+i7NEvaPs4awcXgUv9ZFJmP/AcCTvKwmAnom4JHc56c86yE/Fz
 IwQ/yug60AQPMe05jw4+KxD87URLGKb/IDTzmRvnC29gwg1FR5A2bFNJ+wveK6od
 cN0r40lvHCzVASwOeF2E63RzXcWHFg+tuNq6qm+HQ6LX31MpMe/dfMOCvVm+1A50
 aOn2cnEiUw7mhEiEy0CPtd01hjBEu4QS8xzZwGu/4lHEbInDxpAakQP8ixYE0THF
 KEvR2gFS6G6wYHO3ZQOJHQJnnzL1nmLtsUX3q+5+DIKnLcY/1xofdxloHAH18i+9
 8e9nDB4TVPAHCpiSVFmPtzS7TR5ofkaYIvpxKlolBVgXGkAivYrtcQUMPEG6ZbNL
 wpe6j2IB7EeQeh0z8k9mzr6zZ3Dw5EGcytvAMP3SZAsHpy+uiZ0TOqPdFs1NXLJ7
 7rlpUhlgn2Ar5TI+z5DLeZsKSO8Lb9+X6BlXfblT0dNBclmh52suWwp1yx7hCehD
 mFm7JfkU7+/9XlzkxYqyyl/3qmmuiXfrxf5Uc96kwcczFkXli8z2Q5Jli6dmCq5+
 LE9hkLk6JC5m5QpRv8cg06sHraDbPbTnrrhf5w6txukU+HsldxcQNaJMqLhHCPQ4
 CUYWRImr0no8PJZQkslIgWaqkpQejS5UzPQbFnkQblvP2XMvOFU=
 =1xnI
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for Maxim MAX77714 PMIC

  Removed Drivers:
   - Remove support for ST-Ericsson AB8500 DebugFS

  New Device Support:
   - Add support for Silergy SY7636A to Simple MFD I2C
   - Add support for MediaTek MT6366 PMIC to MT6358 IRQ
   - Add support for Charger to Intel PMIC CRC
   - Add support for Raptor Lake to Intel LPSS PCI

  New Functionality:
   - Add support for Reboot to Rockchip RK808

  Fix-ups:
   - Device Tree changes (includcing YAML conversion) for
     silergy,sy7636a, maxim,max77843, google,cros-ec, maxim,max14577,
     maxim,max77802, maxim,max77714, qcom,tcsr, qcom,spmi-pmic,
     stericsson,ab8500, stericsson,db8500-prcmu,
     samsung,exynos5433-lpass, mt6397, syscon, brcm,cru
   - Visible to menuconfig; simple-mfd-i2c
   - Clean-up or clarify code; max77686, intel_soc_pmic_crc
   - Improve error handling; mc13xxx-core, stmfx, asic3
   - Pass device information to child devices; iqs62x, intel-lpss-acpi
   - Individually identify IRQ domains; intel_soc_pmic_core
   - Remove superfluous code; dbx500-prcmu, exynos-lpass
   - Staticify and constify; arizona-i2c
   - Mark sometimes used data as __maybe_unused; atmel-flexcom
   - Account for different ACPI tables on AOSP/Windows platforms; arizona-spi
   - Use provided (platform) APIs; ab8500-core
   - Trivial (whitespace, spelling); rohm-bd9576"

* tag 'mfd-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits)
  dt-bindings: mfd: syscon: Add microchip,lan966x-cpu-syscon compatible
  mfd: bd9576: fix typos in comments
  mfd: Use platform_get_irq() to get the interrupt
  mfd: db8500-prcmu: Remove unused inline function
  mfd: arizona-spi: Add Android board ACPI table handling
  mfd: arizona-spi: Split Windows ACPI init code into its own function
  mfd: asic3: Add missing iounmap() on error asic3_mfd_probe
  MAINTAINERS: Rectify entry for ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS
  mfd: intel-lpss: Provide an SSP type to the driver
  dt-bindings: mfd: brcm,cru: Rename pinctrl node
  dt-bindings: Add compatibles for undocumented trivial syscons
  mfd: atmel-flexcom: Fix compilation warning
  dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC
  dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema
  mfd: exynos-lpass: Drop unneeded syscon.h include
  mfd: intel-lpss: Add Intel Raptor Lake PCH-S PCI IDs
  mfd: ab8500: Drop debugfs module
  mfd: sta2x11: Use GFP_KERNEL instead of GFP_ATOMIC
  mfd: ab8500: Rewrite bindings in YAML
  mfd: qcom-spmi-pmic: Add pm8953 compatible
  ...
2022-03-25 13:56:18 -07:00
Clément Léger
81c2f059ab rtc: optee: add RTC driver for OP-TEE RTC PTA
This drivers allows to communicate with a RTC PTA handled by OP-TEE [1].
This PTA allows to query RTC information, set/get time and set/get
offset depending on the supported features.

[1] https://github.com/OP-TEE/optee_os/pull/5179

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220308133505.471601-1-clement.leger@bootlin.com
2022-03-25 11:42:50 +01:00
Loic Poulain
870c54e1a3 rtc: pm8xxx: Return -ENODEV if set_time disallowed
Having !allow_set_time is equivalent to non-implemented set_time
function, which is normally represented with -ENODEV error in RTC
subsystem.

Today we are returning -EACCES error code, which is not considered
by RTC clients as a 'non implemented' feature, and which causes NTP
to retry hw clk sync (update_rtc) indefinitely.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1645090578-20734-1-git-send-email-loic.poulain@linaro.org
2022-03-25 11:38:33 +01:00
Loic Poulain
b5bf5b283d rtc: pm8xxx: Attach wake irq to device
Attach the interrupt as a wake-irq to the device, so that:
- A corresponding wakeup source is created (and reported in e.g
  /sys/kernel/debug/wakeup_sources).
- The power subsystem take cares of arming/disarming
  irq-wake automatically on suspend/resume.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1645025082-6138-1-git-send-email-loic.poulain@linaro.org
2022-03-25 11:37:55 +01:00
Alexandre Belloni
1a31d63632 rtc: remove uie_unsupported
uie_unsupported is not used by any drivers anymore, remove it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220309162301.61679-29-alexandre.belloni@bootlin.com
2022-03-23 19:58:41 +01:00
Alexandre Belloni
ed90e3e20d rtc: xgene: stop using uie_unsupported
Remove bogus use of uie_unsupported.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220309162301.61679-28-alexandre.belloni@bootlin.com
2022-03-23 19:58:41 +01:00
Alexandre Belloni
7e1df2f1c5 rtc: hym8563: switch to RTC_FEATURE_UPDATE_INTERRUPT
Stop using uie_unsupported and clear RTC_FEATURE_UPDATE_INTERRUPT instead.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220309162301.61679-27-alexandre.belloni@bootlin.com
2022-03-23 19:58:40 +01:00
Alexandre Belloni
e6b7d19d39 rtc: hym8563: let the core handle the alarm resolution
Set RTC_FEATURE_ALARM_RES_MINUTE, so the core knows alarms have a
resolution of a minute. Also, the core will properly round down the alarm
instead of up.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220309162301.61679-26-alexandre.belloni@bootlin.com
2022-03-23 19:58:40 +01:00
Alexandre Belloni
07398602c8 rtc: hym8563: switch to devm_rtc_allocate_device
Switch to devm_rtc_allocate_device/devm_rtc_register_device, this allows
for further improvement of the driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220309162301.61679-25-alexandre.belloni@bootlin.com
2022-03-23 19:58:40 +01:00
Alexandre Belloni
1350b94c94 rtc: efi: switch to RTC_FEATURE_UPDATE_INTERRUPT
Stop using uie_unsupported and clear RTC_FEATURE_UPDATE_INTERRUPT instead.
Also the driver doesn't supports UIE because it doesn't handle interrupts
so set RTC_FEATURE_ALARM_WAKEUP_ONLY,.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220309162301.61679-24-alexandre.belloni@bootlin.com
2022-03-23 19:58:40 +01:00
Alexandre Belloni
8aa7436396 rtc: efi: switch to devm_rtc_allocate_device
Switch to devm_rtc_allocate_device/devm_rtc_register_device, this allows
for further improvement of the driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220309162301.61679-23-alexandre.belloni@bootlin.com
2022-03-23 19:58:40 +01:00