Commit 4969c1192d ("mm: fix swapin race condition") is now agreed to
be incomplete. There's a race, not very much less likely than the
original race envisaged, in which it is further necessary to check that
the swapcache page's swap has not changed.
Here's the reasoning: cast in terms of reuse_swap_page(), but probably
could be reformulated to rely on try_to_free_swap() instead, or on
swapoff+swapon.
A, faults into do_swap_page(): does page1 = lookup_swap_cache(swap1) and
comes through the lock_page(page1).
B, a racing thread of the same process, faults on the same address: does
page1 = lookup_swap_cache(swap1) and now waits in lock_page(page1), but
for whatever reason is unlucky not to get the lock any time soon.
A carries on through do_swap_page(), a write fault, but cannot reuse the
swap page1 (another reference to swap1). Unlocks the page1 (but B
doesn't get it yet), does COW in do_wp_page(), page2 now in that pte.
C, perhaps the parent of A+B, comes in and write faults the same swap
page1 into its mm, reuse_swap_page() succeeds this time, swap1 is freed.
kswapd comes in after some time (B still unlucky) and swaps out some
pages from A+B and C: it allocates the original swap1 to page2 in A+B,
and some other swap2 to the original page1 now in C. But does not
immediately free page1 (actually it couldn't: B holds a reference),
leaving it in swap cache for now.
B at last gets the lock on page1, hooray! Is PageSwapCache(page1)? Yes.
Is pte_same(*page_table, orig_pte)? Yes, because page2 has now been
given the swap1 which page1 used to have. So B proceeds to insert page1
into A+B's page_table, though its content now belongs to C, quite
different from what A wrote there.
B ought to have checked that page1's swap was still swap1.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: Range check cpu in blk_cpu_to_group
scatterlist: prevent invalid free when alloc fails
writeback: Fix lost wake-up shutting down writeback thread
writeback: do not lose wakeup events when forking bdi threads
cciss: fix reporting of max queue depth since init
block: switch s390 tape_block and mg_disk to elevator_change()
block: add function call to switch the IO scheduler from a driver
fs/bio-integrity.c: return -ENOMEM on kmalloc failure
bio-integrity.c: remove dependency on __GFP_NOFAIL
BLOCK: fix bio.bi_rw handling
block: put dev->kobj in blk_register_queue fail path
cciss: handle allocation failure
cfq-iosched: Documentation help for new tunables
cfq-iosched: blktrace print per slice sector stats
cfq-iosched: Implement tunable group_idle
cfq-iosched: Do group share accounting in IOPS when slice_idle=0
cfq-iosched: Do not idle if slice_idle=0
cciss: disable doorbell reset on reset_devices
blkio: Fix return code for mkdir calls
When under significant memory pressure, a process enters direct reclaim
and immediately afterwards tries to allocate a page. If it fails and no
further progress is made, it's possible the system will go OOM. However,
on systems with large amounts of memory, it's possible that a significant
number of pages are on per-cpu lists and inaccessible to the calling
process. This leads to a process entering direct reclaim more often than
it should increasing the pressure on the system and compounding the
problem.
This patch notes that if direct reclaim is making progress but allocations
are still failing that the system is already under heavy pressure. In
this case, it drains the per-cpu lists and tries the allocation a second
time before continuing.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ordinarily watermark checks are based on the vmstat NR_FREE_PAGES as it is
cheaper than scanning a number of lists. To avoid synchronization
overhead, counter deltas are maintained on a per-cpu basis and drained
both periodically and when the delta is above a threshold. On large CPU
systems, the difference between the estimated and real value of
NR_FREE_PAGES can be very high. If NR_FREE_PAGES is much higher than
number of real free page in buddy, the VM can allocate pages below min
watermark, at worst reducing the real number of pages to zero. Even if
the OOM killer kills some victim for freeing memory, it may not free
memory if the exit path requires a new page resulting in livelock.
This patch introduces a zone_page_state_snapshot() function (courtesy of
Christoph) that takes a slightly more accurate view of an arbitrary vmstat
counter. It is used to read NR_FREE_PAGES while kswapd is awake to avoid
the watermark being accidentally broken. The estimate is not perfect and
may result in cache line bounces but is expected to be lighter than the
IPI calls necessary to continually drain the per-cpu counters while kswapd
is awake.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When allocating a page, the system uses NR_FREE_PAGES counters to
determine if watermarks would remain intact after the allocation was made.
This check is made without interrupts disabled or the zone lock held and
so is race-prone by nature. Unfortunately, when pages are being freed in
batch, the counters are updated before the pages are added on the list.
During this window, the counters are misleading as the pages do not exist
yet. When under significant pressure on systems with large numbers of
CPUs, it's possible for processes to make progress even though they should
have been stalled. This is particularly problematic if a number of the
processes are using GFP_ATOMIC as the min watermark can be accidentally
breached and in extreme cases, the system can livelock.
This patch updates the counters after the pages have been added to the
list. This makes the allocator more cautious with respect to preserving
the watermarks and mitigates livelock possibilities.
[akpm@linux-foundation.org: avoid modifying incoming args]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
refresh_zone_stat_thresholds() calculates parameter based on the number of
online cpus. It's called at cpu offlining but needs to be called at
onlining, too.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tests with recent firmware on Intel X25-M 80GB and OCZ Vertex 60GB SSDs
show a shift since I last tested in December: in part because of firmware
updates, in part because of the necessary move from barriers to awaiting
completion at the block layer. While discard at swapon still shows as
slightly beneficial on both, discarding 1MB swap cluster when allocating
is now disadvanteous: adds 25% overhead on Intel, adds 230% on OCZ (YMMV).
Surrender: discard as presently implemented is more hindrance than help
for swap; but might prove useful on other devices, or with improvements.
So continue to do the discard at swapon, but make discard while swapping
conditional on a SWAP_FLAG_DISCARD to sys_swapon() (which has been using
only the lower 16 bits of int flags).
We can add a --discard or -d to swapon(8), and a "discard" to swap in
/etc/fstab: matching the mount option for btrfs, ext4, fat, gfs2, nilfs2.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nigel Cunningham <nigel@tuxonice.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The swap code already uses synchronous discards, no need to add I/O
barriers.
This fixes the worst of the terrible slowdown in swap allocation for
hibernation, reported on 2.6.35 by Nigel Cunningham; but does not entirely
eliminate that regression.
[tj@kernel.org: superflous newlines removed]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Nigel Cunningham <nigel@tuxonice.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the hibernation check from scan_swap_map() into try_to_free_swap():
to catch not only the common case when hibernation's allocation itself
triggers swap reuse, but also the less likely case when concurrent page
reclaim (shrink_page_list) might happen to try_to_free_swap from a page.
Hibernation already clears __GFP_IO from the gfp_allowed_mask, to stop
reclaim from going to swap: check that to prevent swap reuse too.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Andrea Gelmini <andrea.gelmini@gmail.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nigel Cunningham <nigel@tuxonice.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Please revert 2.6.36-rc commit d2997b1042
"hibernation: freeze swap at hibernation". It complicated matters by
adding a second swap allocation path, just for hibernation; without in any
way fixing the issue that it was intended to address - page reclaim after
fixing the hibernation image might free swap from a page already imaged as
swapcache, letting its swap be reallocated to store a different page of
the image: resulting in data corruption if the imaged page were freed as
clean then swapped back in. Pages freed to si->swap_map were still in
danger of being reallocated by the alternative allocation path.
I guess it inadvertently fixed slow SSD swap allocation for hibernation,
as reported by Nigel Cunningham: by missing out the discards that occur on
the usual swap allocation path; but that was unintentional, and needs a
separate fix.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Andrea Gelmini <andrea.gelmini@gmail.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nigel Cunningham <nigel@tuxonice.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I have been seeing problems on Tegra 2 (ARMv7 SMP) systems with HIGHMEM
enabled on 2.6.35 (plus some patches targetted at 2.6.36 to perform cache
maintenance lazily), and the root cause appears to be that the mm bouncing
code is calling flush_dcache_page before it copies the bounce buffer into
the bio.
The bounced page needs to be flushed after data is copied into it, to
ensure that architecture implementations can synchronize instruction and
data caches if necessary.
Signed-off-by: Gary King <gking@nvidia.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
next_active_pageblock() is for finding next _used_ freeblock. It skips
several blocks when it finds there are a chunk of free pages lager than
pageblock. But it has 2 bugs.
1. We have no lock. page_order(page) - pageblock_order can be minus.
2. pageblocks_stride += is wrong. it should skip page_order(p) of pages.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Iram reported that compaction's too_many_isolated() loops forever.
(http://www.spinics.net/lists/linux-mm/msg08123.html)
The meminfo when the situation happened was inactive anon is zero. That's
because the system has no memory pressure until then. While all anon
pages were in the active lru, compaction could select active lru as well
as inactive lru. That's a different thing from vmscan's isolated. So we
has been two too_many_isolated.
While compaction can isolate pages in both active and inactive, current
implementation of too_many_isolated only considers inactive. It made
Iram's problem.
This patch handles active and inactive fairly. That's because we can't
expect where from and how many compaction would isolated pages.
This patch changes (nr_isolated > nr_inactive) with
nr_isolated > (nr_active + nr_inactive) / 2.
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Reported-by: Iram Shahzad <iram.shahzad@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
COMPACTION enables MIGRATION, but MIGRATION spawns a warning if numa or
memhotplug aren't selected. However MIGRATION doesn't depend on them. I
guess it's just trying to be strict doing a double check on who's enabling
it, but it doesn't know that compaction also enables MIGRATION.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The pte_same check is reliable only if the swap entry remains pinned (by
the page lock on swapcache). We've also to ensure the swapcache isn't
removed before we take the lock as try_to_free_swap won't care about the
page pin.
One of the possible impacts of this patch is that a KSM-shared page can
point to the anon_vma of another process, which could exit before the page
is freed.
This can leave a page with a pointer to a recycled anon_vma object, or
worse, a pointer to something that is no longer an anon_vma.
[riel@redhat.com: changelog help]
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
So it can be used by all that need to check for that.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: fix a mismatch between code and comment
percpu: fix a memory leak in pcpu_extend_area_map()
percpu: add __percpu notations to UP allocator
percpu: handle __percpu notations in UP accessors
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: fix get_ticket_handler() error handling
ceph: don't BUG on ENOMEM during mds reconnect
ceph: ceph_mdsc_build_path() returns an ERR_PTR
ceph: Fix warnings
ceph: ceph_get_inode() returns an ERR_PTR
ceph: initialize fields on new dentry_infos
ceph: maintain i_head_snapc when any caps are dirty, not just for data
ceph: fix osd request lru adjustment when sending request
ceph: don't improperly set dir complete when holding EXCL cap
mm: exporting account_page_dirty
ceph: direct requests in snapped namespace based on nonsnap parent
ceph: queue cap snap writeback for realm children on snap update
ceph: include dirty xattrs state in snapped caps
ceph: fix xattr cap writeback
ceph: fix multiple mds session shutdown
After several hours, kbuild tests hang with anon_vma_prepare() spinning on
a newly allocated anon_vma's lock - on a box with CONFIG_TREE_PREEMPT_RCU=y
(which makes this very much more likely, but it could happen without).
The ever-subtle page_lock_anon_vma() now needs a further twist: since
anon_vma_prepare() and anon_vma_fork() are liable to change the ->root
of a reused anon_vma structure at any moment, page_lock_anon_vma()
needs to check page_mapped() again before succeeding, otherwise
page_unlock_anon_vma() might address a different root->lock.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When pcpu_build_alloc_info() searches best_upa value, it ignores current value
if the number of waste units exceeds 1/3 of the number of total cpus. But the
comment on the code says that it will ignore if wastage is over 25%.
Modify the comment.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The original code did not free the old map. This patch fixes it.
tj: use @old as memcpy source instead of @chunk->map, and indentation
and description update
Signed-off-by: Huang Shijie <shijie8@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
This patch fixes the following issue:
INFO: task mount.nfs4:1120 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
mount.nfs4 D 00000000fffc6a21 0 1120 1119 0x00000000
ffff880235643948 0000000000000046 ffffffff00000000 ffffffff00000000
ffff880235643fd8 ffff880235314760 00000000001d44c0 ffff880235643fd8
00000000001d44c0 00000000001d44c0 00000000001d44c0 00000000001d44c0
Call Trace:
[<ffffffff813bc747>] schedule_timeout+0x34/0xf1
[<ffffffff813bc530>] ? wait_for_common+0x3f/0x130
[<ffffffff8106b50b>] ? trace_hardirqs_on+0xd/0xf
[<ffffffff813bc5c3>] wait_for_common+0xd2/0x130
[<ffffffff8104159c>] ? default_wake_function+0x0/0xf
[<ffffffff813beaa0>] ? _raw_spin_unlock+0x26/0x2a
[<ffffffff813bc6bb>] wait_for_completion+0x18/0x1a
[<ffffffff81101a03>] sync_inodes_sb+0xca/0x1bc
[<ffffffff811056a6>] __sync_filesystem+0x47/0x7e
[<ffffffff81105798>] sync_filesystem+0x47/0x4b
[<ffffffff810e7ffd>] generic_shutdown_super+0x22/0xd2
[<ffffffff810e80f8>] kill_anon_super+0x11/0x4f
[<ffffffffa00d06d7>] nfs4_kill_super+0x3f/0x72 [nfs]
[<ffffffff810e7b68>] deactivate_locked_super+0x21/0x41
[<ffffffff810e7fd6>] deactivate_super+0x40/0x45
[<ffffffff810fc66c>] mntput_no_expire+0xb8/0xed
[<ffffffff810fc73b>] release_mounts+0x9a/0xb0
[<ffffffff810fc7bb>] put_mnt_ns+0x6a/0x7b
[<ffffffffa00d0fb2>] nfs_follow_remote_path+0x19a/0x296 [nfs]
[<ffffffffa00d11ca>] nfs4_try_mount+0x75/0xaf [nfs]
[<ffffffffa00d1790>] nfs4_get_sb+0x276/0x2ff [nfs]
[<ffffffff810e7dba>] vfs_kern_mount+0xb8/0x196
[<ffffffff810e7ef6>] do_kern_mount+0x48/0xe8
[<ffffffff810fdf68>] do_mount+0x771/0x7e8
[<ffffffff810fe062>] sys_mount+0x83/0xbd
[<ffffffff810089c2>] system_call_fastpath+0x16/0x1b
The reason of this hang was a race condition: when the flusher thread is
forking a bdi thread, we use 'kthread_run()', so we run it _before_ we make it
visible in 'bdi->wb.task'. The bdi thread runs, does all works, and goes sleep.
'bdi->wb.task' is still NULL. And this is a dangerous time window.
If at this time someone queues a work for this bdi, he does not see the bdi
thread and wakes up the forker thread instead! But the forker has already
forked this bdi thread, but just did not make it visible yet!
The result is that we lose the wake up event for this bdi thread and the NFS4
code waits forever.
To fix the problem, we should use 'ktrhead_create()' for creating bdi threads,
then make them visible in 'bdi->wb.task', and only after this wake them up.
This is exactly what this patch does.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* '2.6.36-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev:
xfs: do not discard page cache data on EAGAIN
xfs: don't do memory allocation under the CIL context lock
xfs: Reduce log force overhead for delayed logging
xfs: dummy transactions should not dirty VFS state
xfs: ensure f_ffree returned by statfs() is non-negative
xfs: handle negative wbc->nr_to_write during sync writeback
writeback: write_cache_pages doesn't terminate at nr_to_write <= 0
xfs: fix untrusted inode number lookup
xfs: ensure we mark all inodes in a freed cluster XFS_ISTALE
xfs: unlock items before allowing the CIL to commit
pa-risc and ia64 have stacks that grow upwards. Check that
they do not run into other mappings. By making VM_GROWSUP
0x0 on architectures that do not ever use it, we can avoid
some unpleasant #ifdefs in check_stack_guard_page().
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I noticed XFS writeback in 2.6.36-rc1 was much slower than it should have
been. Enabling writeback tracing showed:
flush-253:16-8516 [007] 1342952.351608: wbc_writepage: bdi 253:16: towrt=1024 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0
flush-253:16-8516 [007] 1342952.351654: wbc_writepage: bdi 253:16: towrt=1023 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0
flush-253:16-8516 [000] 1342952.369520: wbc_writepage: bdi 253:16: towrt=0 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0
flush-253:16-8516 [000] 1342952.369542: wbc_writepage: bdi 253:16: towrt=-1 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0
flush-253:16-8516 [000] 1342952.369549: wbc_writepage: bdi 253:16: towrt=-2 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0
Writeback is not terminating in background writeback if ->writepage is
returning with wbc->nr_to_write == 0, resulting in sub-optimal single page
writeback on XFS.
Fix the write_cache_pages loop to terminate correctly when this situation
occurs and so prevent this sub-optimal background writeback pattern. This
improves sustained sequential buffered write performance from around
250MB/s to 750MB/s for a 100GB file on an XFS filesystem on my 8p test VM.
Cc:<stable@kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This allows code outside of the mm core to safely manipulate page state
and not worry about the other accounting. Not using these routines means
that some code will lose track of the accounting and we get bugs. This
has happened once already.
Signed-off-by: Michael Rubin <mrubin@google.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Like the mlock() change previously, this makes the stack guard check
code use vma->vm_prev to see what the mapping below the current stack
is, rather than have to look it up with find_vma().
Also, accept an abutting stack segment, since that happens naturally if
you split the stack with mlock or mprotect.
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we've split the stack vma, only the lowest one has the guard page.
Now that we have a doubly linked list of vma's, checking this is trivial.
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's a really simple list, and several of the users want to go backwards
in it to find the previous vma. So rather than have to look up the
previous entry with 'find_vma_prev()' or something similar, just make it
doubly linked instead.
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dump_tasks() needs to hold the RCU read lock around its access of the
target task's UID. To this end it should use task_uid() as it only needs
that one thing from the creds.
The fact that dump_tasks() holds tasklist_lock is insufficient to prevent the
target process replacing its credentials on another CPU.
Then, this patch change to call rcu_read_lock() explicitly.
===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
mm/oom_kill.c:410 invoked rcu_dereference_check() without protection!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
4 locks held by kworker/1:2/651:
#0: (events){+.+.+.}, at: [<ffffffff8106aae7>]
process_one_work+0x137/0x4a0
#1: (moom_work){+.+...}, at: [<ffffffff8106aae7>]
process_one_work+0x137/0x4a0
#2: (tasklist_lock){.+.+..}, at: [<ffffffff810fafd4>]
out_of_memory+0x164/0x3f0
#3: (&(&p->alloc_lock)->rlock){+.+...}, at: [<ffffffff810fa48e>]
find_lock_task_mm+0x2e/0x70
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 0aad4b3124 ("oom: fold __out_of_memory into out_of_memory")
introduced a tasklist_lock leak. Then it caused following obvious
danger warnings and panic.
================================================
[ BUG: lock held when returning to user space! ]
------------------------------------------------
rsyslogd/1422 is leaving the kernel with locks still held!
1 lock held by rsyslogd/1422:
#0: (tasklist_lock){.+.+.+}, at: [<ffffffff810faf64>] out_of_memory+0x164/0x3f0
BUG: scheduling while atomic: rsyslogd/1422/0x00000002
INFO: lockdep is turned off.
This patch fixes it.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When radix_tree_maxindex() is ~0UL, it can happen that scanning overflows
index and tree traversal code goes astray reading memory until it hits
unreadable memory. Check for overflow and exit in that case.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit makes the stack guard page somewhat less visible to user
space. It does this by:
- not showing the guard page in /proc/<pid>/maps
It looks like lvm-tools will actually read /proc/self/maps to figure
out where all its mappings are, and effectively do a specialized
"mlockall()" in user space. By not showing the guard page as part of
the mapping (by just adding PAGE_SIZE to the start for grows-up
pages), lvm-tools ends up not being aware of it.
- by also teaching the _real_ mlock() functionality not to try to lock
the guard page.
That would just expand the mapping down to create a new guard page,
so there really is no point in trying to lock it in place.
It would perhaps be nice to show the guard page specially in
/proc/<pid>/maps (or at least mark grow-down segments some way), but
let's not open ourselves up to more breakage by user space from programs
that depends on the exact deails of the 'maps' file.
Special thanks to Henrique de Moraes Holschuh for diving into lvm-tools
source code to see what was going on with the whole new warning.
Reported-and-tested-by: François Valenduc <francois.valenduc@tvcablenet.be
Reported-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove leading /** from non-kernel-doc function comments to prevent
kernel-doc warnings.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We do in fact need to unmap the page table _before_ doing the whole
stack guard page logic, because if it is needed (mainly 32-bit x86 with
PAE and CONFIG_HIGHPTE, but other architectures may use it too) then it
will do a kmap_atomic/kunmap_atomic.
And those kmaps will create an atomic region that we cannot do
allocations in. However, the whole stack expand code will need to do
anon_vma_prepare() and vma_lock_anon_vma() and they cannot do that in an
atomic region.
Now, a better model might actually be to do the anon_vma_prepare() when
_creating_ a VM_GROWSDOWN segment, and not have to worry about any of
this at page fault time. But in the meantime, this is the
straightforward fix for the issue.
See https://bugzilla.kernel.org/show_bug.cgi?id=16588 for details.
Reported-by: Wylda <wylda@volny.cz>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Reported-by: Mike Pagano <mpagano@gentoo.org>
Reported-by: François Valenduc <francois.valenduc@tvcablenet.be>
Tested-by: Ed Tomlinson <edt@aei.ca>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove an extraneous no_printk() in mm/nommu.c that got missed when the
function got generalised from several things that used it in commit
12fdff3fc2 ("Add a dummy printk function for the maintenance of unused
printks").
Without this, the following error is observed:
mm/nommu.c:41: error: conflicting types for 'no_printk'
include/linux/kernel.h:314: error: previous definition of 'no_printk' was here
Reported-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. which didn't show up in my tests because it's a no-op on x86-64 and
most other architectures. But we enter the function with the last-level
page table mapped, and should unmap it at exit.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a rather minimally invasive patch to solve the problem of the
user stack growing into a memory mapped area below it. Whenever we fill
the first page of the stack segment, expand the segment down by one
page.
Now, admittedly some odd application might _want_ the stack to grow down
into the preceding memory mapping, and so we may at some point need to
make this a process tunable (some people might also want to have more
than a single page of guarding), but let's try the minimal approach
first.
Tested with trivial application that maps a single page just below the
stack, and then starts recursing. Without this, we will get a SIGSEGV
_after_ the stack has smashed the mapping. With this patch, we'll get a
nice SIGBUS just as the stack touches the page just above the mapping.
Requested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'stable/xen-swiotlb-0.8.6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
x86: Detect whether we should use Xen SWIOTLB.
pci-swiotlb-xen: Add glue code to setup dma_ops utilizing xen_swiotlb_* functions.
swiotlb-xen: SWIOTLB library for Xen PV guest with PCI passthrough.
xen/mmu: inhibit vmap aliases rather than trying to clear them out
vmap: add flag to allow lazy unmap to be disabled at runtime
xen: Add xen_create_contiguous_region
xen: Rename the balloon lock
xen: Allow unprivileged Xen domains to create iomap pages
xen: use _PAGE_IOMAP in ioremap to do machine mappings
Fix up trivial conflicts (adding both xen swiotlb and xen pci platform
driver setup close to each other) in drivers/xen/{Kconfig,Makefile} and
include/xen/xen-ops.h
Split get_dirty_limits() into global_dirty_limits()+bdi_dirty_limit(), so
that the latter can be avoided when under global dirty background
threshold (which is the normal state for most systems).
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reducing the number of times balance_dirty_pages calls global_page_state
reduces the cache references and so improves write performance on a
variety of workloads.
'perf stats' of simple fio write tests shows the reduction in cache
access. Where the test is fio 'write,mmap,600Mb,pre_read' on AMD AthlonX2
with 3Gb memory (dirty_threshold approx 600 Mb) running each test 10
times, dropping the fasted & slowest values then taking the average &
standard deviation
average (s.d.) in millions (10^6)
2.6.31-rc8 648.6 (14.6)
+patch 620.1 (16.5)
Achieving this reduction is by dropping clip_bdi_dirty_limit as it rereads
the counters to apply the dirty_threshold and moving this check up into
balance_dirty_pages where it has already read the counters.
Also by rearrange the for loop to only contain one copy of the limit tests
allows the pdflush test after the loop to use the local copies of the
counters rather than rereading them.
In the common case with no throttling it now calls global_page_state 5
fewer times and bdi_stat 2 fewer.
Fengguang:
This patch slightly changes behavior by replacing clip_bdi_dirty_limit()
with the explicit check (nr_reclaimable + nr_writeback >= dirty_thresh) to
avoid exceeding the dirty limit. Since the bdi dirty limit is mostly
accurate we don't need to do routinely clip. A simple dirty limit check
would be enough.
The check is necessary because, in principle we should throttle everything
calling balance_dirty_pages() when we're over the total limit, as said by
Peter.
We now set and clear dirty_exceeded not only based on bdi dirty limits,
but also on the global dirty limit. The global limit check is added in
place of clip_bdi_dirty_limit() for safety and not intended as a behavior
change. The bdi limits should be tight enough to keep all dirty pages
under the global limit at most time; occasional small exceeding should be
OK though. The change makes the logic more obvious: the global limit is
the ultimate goal and shall be always imposed.
We may now start background writeback work based on outdated conditions.
That's safe because the bdi flush thread will (and have to) double check
the states. It reduces overall overheads because the test based on old
states still have good chance to be right.
[akpm@linux-foundation.org] fix uninitialized dirty_exceeded
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a fatal kernel-doc error due to a #define coming between a function's
kernel-doc notation and the function signature. (kernel-doc cannot handle
this)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mem_cgroup_soft_limit_reclaim() has zone, nid and zid argument. but nid
and zid can be calculated from zone. So remove it.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Nishimura Daisuke <d-nishimura@mtf.biglobe.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently mem_cgroup_shrink_node_zone() call shrink_zone() directly. thus
it doesn't need to initialize sc.nodemask because shrink_zone() doesn't
use it at all.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Nishimura Daisuke <d-nishimura@mtf.biglobe.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
