MT8183 implements the UFSHCI 2.1 spec but reports a bogus value of 1 in
the reserved part for the Legacy Single Doorbell Support (LSDBS)
capability.
Set UFSHCD_QUIRK_BROKEN_LSDBS_CAP when MCQ support is explicitly
disabled, allowing the device to be properly registered.
Signed-off-by: Mary Guillemard <mary@mary.zone>
Link: https://lore.kernel.org/r/20240818222442.44990-3-mary@mary.zone
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
SM8550 SoC has the UFSHCI 4.0 compliant UFS controller and only supports
legacy single doorbell mode without MCQ. But due to a hardware bug, it
reports 1 in the 'Legacy Queue & Single Doorbell Support (LSDBS)' field of
the Controller Capabilities register. This field is supposed to read as 0
if legacy single doorbell mode is supported and 1 otherwise.
Starting with commit 0c60eb0cc3 ("scsi: ufs: core: Check LSDBS cap when
!mcq"), ufshcd driver is now relying on the LSDBS field to decide when to
use the legacy doorbell mode if MCQ is not supported. And this ends up
breaking UFS on SM8550:
ufshcd-qcom 1d84000.ufs: ufshcd_init: failed to initialize (legacy doorbell mode not supported)
ufshcd-qcom 1d84000.ufs: error -EINVAL: Initialization failed with error -22
So use the UFSHCD_QUIRK_BROKEN_LSDBS_CAP quirk for SM8550 SoC so that the
ufshcd driver could use legacy doorbell mode correctly.
Fixes: 0c60eb0cc3 ("scsi: ufs: core: Check LSDBS cap when !mcq")
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240816-ufs-bug-fix-v3-2-e6fe0e18e2a3@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
'Legacy Queue & Single Doorbell Support (LSDBS)' field in the controller
capabilities register is supposed to report whether the legacy single
doorbell mode is supported in the controller or not. But some controllers
report '1' in this field which corresponds to 'LSDB not supported', but
they indeed support LSDB. So let's add a quirk to handle those controllers.
If the quirk is enabled by the controller driver, then LSDBS register field
will be ignored and legacy single doorbell mode is assumed to be enabled
always.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240816-ufs-bug-fix-v3-1-e6fe0e18e2a3@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ufshcd_add_delay_before_dme_cmd() always introduces a delay of
MIN_DELAY_BEFORE_DME_CMDS_US between DME commands even when it's not
required. The delay is added when the UFS host controller supplies the
quirk UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS.
Fix the logic to update hba->last_dme_cmd_tstamp to ensure subsequent DME
commands have the correct delay in the range of 0 to
MIN_DELAY_BEFORE_DME_CMDS_US.
Update the timestamp at the end of the function to ensure it captures the
latest time after any necessary delay has been applied.
Signed-off-by: Vamshi Gajjela <vamshigajjela@google.com>
Link: https://lore.kernel.org/r/20240724135126.1786126-1-vamshigajjela@google.com
Fixes: cad2e03d86 ("ufs: add support to allow non standard behaviours (quirks)")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If exynos_ufs_fmp_init() did not enable FMP support, then
exynos_ufs_fmp_resume() should not execute the FMP-related SMC calls.
Fixes: c96499fcb4 ("scsi: ufs: exynos: Add support for Flash Memory Protector (FMP)")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240721183840.209284-1-ebiggers@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS link is just put into hibern8 state during the 'freeze' process of the
hibernation. Afterwards, the system may get powered down. But that doesn't
matter during wakeup. Because during wakeup from hibernation, UFS link is
again put into hibern8 state by the restore kernel and then the control is
handed over to the to image kernel.
So in both the places, UFS link is never turned OFF. But
ufshcd_system_restore() just assumes that the link will be in OFF state and
sets the link state accordingly. And this breaks hibernation wakeup:
[ 2445.371335] phy phy-1d87000.phy.3: phy_power_on was called before phy_init
[ 2445.427883] ufshcd-qcom 1d84000.ufshc: Controller enable failed
[ 2445.427890] ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5
[ 2445.427906] ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: -5
[ 2445.427918] ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_restore returns -5
[ 2445.427973] ufs_device_wlun 0:0:0:49488: PM: failed to restore async: error -5
So fix the issue by removing the code that sets the link to OFF state.
Cc: Anjana Hari <quic_ahari@quicinc.com>
Cc: stable@vger.kernel.org # 6.3
Fixes: 88441a8d35 ("scsi: ufs: core: Add hibernation callbacks")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240718170659.201647-1-manivannan.sadhasivam@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr) plus some
misc small fixes. The only core changes are to both bsg and scsi to
pass in the device instead of setting it afterwards as q->queuedata,
so no functional change.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZpl6BiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishVkAAQCOLA0V
TFI4RfRjk7TW/6ZgKVS5A4NNLG8p8r9F7Y/QswEAlT4NrYnHiHQwBYEiTw6w02J8
SqiHtHKv/SQ7LIwEJlQ=
=WhCT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr) plus some
misc small fixes.
The only core changes are to both bsg and scsi to pass in the device
instead of setting it afterwards as q->queuedata, so no functional
change"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (69 commits)
scsi: aha152x: Use DECLARE_COMPLETION_ONSTACK for non-constant completion
scsi: qla2xxx: Convert comma to semicolon
scsi: qla2xxx: Update version to 10.02.09.300-k
scsi: qla2xxx: Use QP lock to search for bsg
scsi: qla2xxx: Reduce fabric scan duplicate code
scsi: qla2xxx: Fix optrom version displayed in FDMI
scsi: qla2xxx: During vport delete send async logout explicitly
scsi: qla2xxx: Complete command early within lock
scsi: qla2xxx: Fix flash read failure
scsi: qla2xxx: Return ENOBUFS if sg_cnt is more than one for ELS cmds
scsi: qla2xxx: Fix for possible memory corruption
scsi: qla2xxx: validate nvme_local_port correctly
scsi: qla2xxx: Unable to act on RSCN for port online
scsi: ufs: exynos: Add support for Flash Memory Protector (FMP)
scsi: ufs: core: Add UFSHCD_QUIRK_KEYS_IN_PRDT
scsi: ufs: core: Add fill_crypto_prdt variant op
scsi: ufs: core: Add UFSHCD_QUIRK_BROKEN_CRYPTO_ENABLE
scsi: ufs: core: fold ufshcd_clear_keyslot() into its caller
scsi: ufs: core: Add UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE
scsi: ufs: mcq: Make .get_hba_mac() optional
...
If force_reset is true, bypass quick recovery. This will shorten error
recovery time.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240712094506.11284-1-peter.wang@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If the user sets use_mcq_mode to 0, the host will try to activate the LSDB
mode unconditionally even when the LSDBS of device HCI cap is 1. This makes
commands time out and causes device probing to fail.
To prevent that problem, check the LSDBS cap when MCQ is not supported.
Signed-off-by: Kyoungrul Kim <k831.kim@samsung.com>
Link: https://lore.kernel.org/r/20240709232520epcms2p8ebdb5c4fccc30a6221390566589bf122@epcms2p8
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=wVi8
-----END PGP SIGNATURE-----
Merge tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
Eric Biggers <ebiggers@kernel.org> says:
Add support for Flash Memory Protector (FMP), which is the inline
encryption hardware on Exynos and Exynos-based SoCs.
Specifically, add support for the "traditional FMP mode" that works on
many Exynos-based SoCs including gs101. This is the mode that uses
"software keys" and is compatible with the upstream kernel's existing
inline encryption framework in the block and filesystem layers. I
plan to add support for the wrapped key support on gs101 at a later
time.
Tested on gs101 (specifically Pixel 6) by running the 'encrypt' group
of xfstests on a filesystem mounted with the 'inlinecrypt' mount
option.
This patchset applies to v6.10-rc6, and it has no prerequisites that
aren't already upstream.
Link: https://lore.kernel.org/r/20240708235330.103590-1-ebiggers@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for Flash Memory Protector (FMP), which is the inline
encryption hardware on Exynos and Exynos-based SoCs.
Specifically, add support for the "traditional FMP mode" that works on many
Exynos-based SoCs including gs101. This is the mode that uses "software
keys" and is compatible with the upstream kernel's existing inline
encryption framework in the block and filesystem layers. I plan to add
support for the wrapped key support on gs101 at a later time.
Tested on gs101 (specifically Pixel 6) by running the 'encrypt' group of
xfstests on a filesystem mounted with the 'inlinecrypt' mount option.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-7-ebiggers@kernel.org
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the nonstandard inline encryption support on Exynos SoCs requires
that raw cryptographic keys be copied into the PRDT, it is desirable to
zeroize those keys after each request to keep them from being left in
memory. Therefore, add a quirk bit that enables the zeroization.
We could instead do the zeroization unconditionally. However, using a
quirk bit avoids adding the zeroization overhead to standard devices.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-6-ebiggers@kernel.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a variant op to allow host drivers to initialize nonstandard
crypto-related fields in the PRDT. This is needed to support inline
encryption on the "Exynos" UFS controller.
Note that this will be used together with the support for overriding the
PRDT entry size that was already added by commit ada1e653a5 ("scsi: ufs:
core: Allow UFS host drivers to override the sg entry size").
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-5-ebiggers@kernel.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add UFSHCD_QUIRK_BROKEN_CRYPTO_ENABLE which tells the UFS core to not use
the crypto enable bit defined by the UFS specification. This is needed to
support inline encryption on the "Exynos" UFS controller.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-4-ebiggers@kernel.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fold ufshcd_clear_keyslot() into its only remaining caller.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-3-ebiggers@kernel.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE which lets UFS host drivers
initialize the blk_crypto_profile themselves rather than have it be
initialized by ufshcd-core according to the UFSHCI standard. This is
needed to support inline encryption on the "Exynos" UFS controller which
has a nonstandard interface.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240708235330.103590-2-ebiggers@kernel.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
Please consider this series of UFS driver patches for the next merge window.
Thank you,
Bart.
Link: https://lore.kernel.org/r/20240708211716.2827751-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFSHCI controllers that are compliant with the UFSHCI 4.0 standard report
the maximum number of supported commands in the controller capabilities
register. Use that value if .get_hba_mac == NULL.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-11-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make ufshcd_mcq_decide_queue_depth() easier to read by inlining
ufshcd_mcq_vops_get_hba_mac().
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-10-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the ufshcd_mcq_enable() call from inside ufshcd_config_mcq() to the
callers of this function. No functionality is changed by this patch. This
patch makes a later patch easier to read ("scsi: ufs: Make .get_hba_mac()
optional").
Cc: Peter Wang <peter.wang@mediatek.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-9-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the "hba->mcq_enabled = true" assignment to prevent that it gets
duplicated by a later patch that will introduce more ufshcd_mcq_enable()
calls. No functionality is changed by this patch.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-8-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Improve code readability by inlining is_mcq_enabled().
Cc: Peter Wang <peter.wang@mediatek.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-7-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the hba->reserved_slot and the host->can_queue assignments from
ufshcd_config_mcq() into ufshcd_alloc_mcq(). The advantages of this change
are as follows:
- It becomes easier to verify that these two parameters are updated if
hba->nutrs is updated.
- It prevents unnecessary assignments to these two parameters. While
ufshcd_config_mcq() is called during host reset, ufshcd_alloc_mcq() is
not.
Cc: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename this constant to prepare for the introduction of the
MASK_TRANSFER_REQUESTS_SLOTS_MCQ constant. The acronym "SDB" stands for
"single doorbell" (mode).
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI host template members .cmd_per_lun and .can_queue are copied into
the SCSI host data structure. Before these are used, these are overwritten
by ufshcd_init(). Hence, this patch does not change any functionality.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of first zero-initializing struct uic_command and next initializing
it memberwise, initialize all members at once.
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Several functions are declared in include/ufs/ufshcd.h and also in
drivers/ufs/core/ufshcd-priv.h. Remove the duplicate declarations.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240708211716.2827751-2-bvanassche@acm.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When ufshcd_abort_one is racing with the completion ISR, the completed tag
of the request's mq_hctx pointer will be set to NULL by ISR. Return
success when request is completed by ISR because ufshcd_abort_one does not
need to do anything.
The racing flow is:
Thread A
ufshcd_err_handler step 1
...
ufshcd_abort_one
ufshcd_try_to_abort_task
ufshcd_cmd_inflight(true) step 3
ufshcd_mcq_req_to_hwq
blk_mq_unique_tag
rq->mq_hctx->queue_num step 5
Thread B
ufs_mtk_mcq_intr(cq complete ISR) step 2
scsi_done
...
__blk_mq_free_request
rq->mq_hctx = NULL; step 4
Below is KE back trace.
ufshcd_try_to_abort_task: cmd at tag 41 not pending in the device.
ufshcd_try_to_abort_task: cmd at tag=41 is cleared.
Aborting tag 41 / CDB 0x28 succeeded
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000194
pc : [0xffffffddd7a79bf8] blk_mq_unique_tag+0x8/0x14
lr : [0xffffffddd6155b84] ufshcd_mcq_req_to_hwq+0x1c/0x40 [ufs_mediatek_mod_ise]
do_mem_abort+0x58/0x118
el1_abort+0x3c/0x5c
el1h_64_sync_handler+0x54/0x90
el1h_64_sync+0x68/0x6c
blk_mq_unique_tag+0x8/0x14
ufshcd_err_handler+0xae4/0xfa8 [ufs_mediatek_mod_ise]
process_one_work+0x208/0x4fc
worker_thread+0x228/0x438
kthread+0x104/0x1d4
ret_from_fork+0x10/0x20
Fixes: 93e6c0e19d ("scsi: ufs: core: Clear cmd if abort succeeds in MCQ mode")
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240628070030.30929-3-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When ufshcd_clear_cmd is racing with the completion ISR, the completed tag
of the request's mq_hctx pointer will be set to NULL by the ISR. And
ufshcd_clear_cmd's call to ufshcd_mcq_req_to_hwq will get NULL pointer KE.
Return success when the request is completed by ISR because sq does not
need cleanup.
The racing flow is:
Thread A
ufshcd_err_handler step 1
ufshcd_try_to_abort_task
ufshcd_cmd_inflight(true) step 3
ufshcd_clear_cmd
...
ufshcd_mcq_req_to_hwq
blk_mq_unique_tag
rq->mq_hctx->queue_num step 5
Thread B
ufs_mtk_mcq_intr(cq complete ISR) step 2
scsi_done
...
__blk_mq_free_request
rq->mq_hctx = NULL; step 4
Below is KE back trace:
ufshcd_try_to_abort_task: cmd pending in the device. tag = 6
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000194
pc : [0xffffffd589679bf8] blk_mq_unique_tag+0x8/0x14
lr : [0xffffffd5862f95b4] ufshcd_mcq_sq_cleanup+0x6c/0x1cc [ufs_mediatek_mod_ise]
Workqueue: ufs_eh_wq_0 ufshcd_err_handler [ufs_mediatek_mod_ise]
Call trace:
dump_backtrace+0xf8/0x148
show_stack+0x18/0x24
dump_stack_lvl+0x60/0x7c
dump_stack+0x18/0x3c
mrdump_common_die+0x24c/0x398 [mrdump]
ipanic_die+0x20/0x34 [mrdump]
notify_die+0x80/0xd8
die+0x94/0x2b8
__do_kernel_fault+0x264/0x298
do_page_fault+0xa4/0x4b8
do_translation_fault+0x38/0x54
do_mem_abort+0x58/0x118
el1_abort+0x3c/0x5c
el1h_64_sync_handler+0x54/0x90
el1h_64_sync+0x68/0x6c
blk_mq_unique_tag+0x8/0x14
ufshcd_clear_cmd+0x34/0x118 [ufs_mediatek_mod_ise]
ufshcd_try_to_abort_task+0x2c8/0x5b4 [ufs_mediatek_mod_ise]
ufshcd_err_handler+0xa7c/0xfa8 [ufs_mediatek_mod_ise]
process_one_work+0x208/0x4fc
worker_thread+0x228/0x438
kthread+0x104/0x1d4
ret_from_fork+0x10/0x20
Fixes: 8d72903489 ("scsi: ufs: mcq: Add supporting functions for MCQ abort")
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240628070030.30929-2-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If host tries to remove ufshcd driver from a UFS device it would cause a
kernel panic if ufshcd_async_scan fails during ufshcd_probe_hba before
adding a SCSI host with scsi_add_host and MCQ is enabled since SCSI host
has been defered after MCQ configuration introduced by commit 0cab4023ec
("scsi: ufs: core: Defer adding host to SCSI if MCQ is supported").
To guarantee that SCSI host is removed only if it has been added, set the
scsi_host_added flag to true after adding a SCSI host and check whether it
is set or not before removing it.
Signed-off-by: Kyoungrul Kim <k831.kim@samsung.com>
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Link: https://lore.kernel.org/r/20240627085104epcms2p5897a3870ea5c6416aa44f94df6c543d7@epcms2p5
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enable suspending clk scaling on no request for Qualcomm SoC.
Signed-off-by: Ram Prakash Gupta <quic_rampraka@quicinc.com>
Link: https://lore.kernel.org/r/20240627083756.25340-3-quic_rampraka@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently UFS clk scaling is getting suspended only when the clks are
scaled down. When high load is generated, a huge amount of latency is added
due to scaling up the clk and completing the request post that.
Suspending the scaling in its existing state when high load is generated
improves the random performance KPI by 28%. So suspending the scaling when
there are no requests. And the clk would be put in low scaled state when
the actual request load is low.
Make this change optional by having the check enabled using vops since for
some devices suspending without bringing the clk in low scaled state might
have impact on power consumption of the SoC.
Signed-off-by: Ram Prakash Gupta <quic_rampraka@quicinc.com>
Link: https://lore.kernel.org/r/20240627083756.25340-2-quic_rampraka@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add PCI ID to support Intel Panther Lake, same as MTL.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240618073158.38504-1-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/ufs/host/ufs-qcom.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240625-md-drivers-ufs-host-v2-1-59a56974b05a@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
dma_pad_mask is a queue_limits by all ways of looking at it, so move it
there and set it through the atomic queue limits APIs.
Add a little helper that takes the alignment and pad into account to
simplify the code that is touched a bit.
Note that there never was any need for the > check in
blk_queue_update_dma_pad, this probably was just copy and paste from
dma_update_dma_alignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240626142637.300624-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Under the conditions that a device is to be reinitialized within
ufshcd_probe_hba(), the device must first be fully reset.
Resetting the device should include freeing U8 model (member of dev_info)
but does not, and this causes a memory leak. ufs_put_device_desc() is
responsible for freeing model.
unreferenced object 0xffff3f63008bee60 (size 32):
comm "kworker/u33:1", pid 60, jiffies 4294892642
hex dump (first 32 bytes):
54 48 47 4a 46 47 54 30 54 32 35 42 41 5a 5a 41 THGJFGT0T25BAZZA
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc ed7ff1a9):
[<ffffb86705f1243c>] kmemleak_alloc+0x34/0x40
[<ffffb8670511cee4>] __kmalloc_noprof+0x1e4/0x2fc
[<ffffb86705c247fc>] ufshcd_read_string_desc+0x94/0x190
[<ffffb86705c26854>] ufshcd_device_init+0x480/0xdf8
[<ffffb86705c27b68>] ufshcd_probe_hba+0x3c/0x404
[<ffffb86705c29264>] ufshcd_async_scan+0x40/0x370
[<ffffb86704f43e9c>] async_run_entry_fn+0x34/0xe0
[<ffffb86704f34638>] process_one_work+0x154/0x298
[<ffffb86704f34a74>] worker_thread+0x2f8/0x408
[<ffffb86704f3cfa4>] kthread+0x114/0x118
[<ffffb86704e955a0>] ret_from_fork+0x10/0x20
Fixes: 96a7141da3 ("scsi: ufs: core: Add support for reinitializing the UFS device")
Cc: <stable@vger.kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Joel Slebodnick <jslebodn@redhat.com>
Link: https://lore.kernel.org/r/20240613200202.2524194-1-jslebodn@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In ufshcd_clock_scaling_prepare(), after SCSI layer is blocked,
ufshcd_pending_cmds() is called to check whether there are pending
transactions or not. And only if there are no pending transactions can we
proceed to kickstart the clock scaling sequence.
ufshcd_pending_cmds() traverses over all SCSI devices and calls
sbitmap_weight() on their budget_map. sbitmap_weight() can be broken down
to three steps:
1. Calculate the nr outstanding bits set in the 'word' bitmap.
2. Calculate the nr outstanding bits set in the 'cleared' bitmap.
3. Subtract the result from step 1 by the result from step 2.
This can lead to a race condition as outlined below:
Assume there is one pending transaction in the request queue of one SCSI
device, say sda, and the budget token of this request is 0, the 'word' is
0x1 and the 'cleared' is 0x0.
1. When step 1 executes, it gets the result as 1.
2. Before step 2 executes, block layer tries to dispatch a new request to
sda. Since the SCSI layer is blocked, the request cannot pass through
SCSI but the block layer would do budget_get() and budget_put() to
sda's budget map regardless, so the 'word' has become 0x3 and 'cleared'
has become 0x2 (assume the new request got budget token 1).
3. When step 2 executes, it gets the result as 1.
4. When step 3 executes, it gets the result as 0, meaning there is no
pending transactions, which is wrong.
Thread A Thread B
ufshcd_pending_cmds() __blk_mq_sched_dispatch_requests()
| |
sbitmap_weight(word) |
| scsi_mq_get_budget()
| |
| scsi_mq_put_budget()
| |
sbitmap_weight(cleared)
...
When this race condition happens, the clock scaling sequence is started
with transactions still in flight, leading to subsequent hibernate enter
failure, broken link, task abort and back to back error recovery.
Fix this race condition by quiescing the request queues before calling
ufshcd_pending_cmds() so that block layer won't touch the budget map when
ufshcd_pending_cmds() is working on it. In addition, remove the SCSI layer
blocking/unblocking to reduce redundancies and latencies.
Fixes: 8d077ede48 ("scsi: ufs: Optimize the command queueing code")
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/1717754818-39863-1-git-send-email-quic_ziqichen@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If hba_maxq equals poll_queues, which means there are no I/O queues
(HCTX_TYPE_DEFAULT, HCTX_TYPE_READ), the very first hw queue will be
allocated as HCTX_TYPE_POLL and it will be used as the dev_cmd_queue. In
this case, device commands such as QUERY cannot be properly handled.
This patch prevents the initialization of MCQ when the number of I/O queues
is not set and only the number of POLL queues is set.
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Link: https://lore.kernel.org/r/20240531212244.1593535-3-minwoo.im@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Recently, ufs-mcq feature has been introduced to QEMU hw/ufs device [1].
This patch adds MCQ support for upstream QEMU UFS PCI controller. This
patch provides mandatory vops callbacks to make UFS controller work
properly on MCQ mode. Operation and Runtime Config register stride is
fixed to 48bytes which is implemented by qemu.
[1] https://lore.kernel.org/qemu-devel/cover.1716876237.git.jeuk20.kim@samsung.com/
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Link: https://lore.kernel.org/r/20240531212244.1593535-2-minwoo.im@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Inline functions are preferred over macros. Convert the MCQ_CFG_n macro to
an inline function.
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Link: https://lore.kernel.org/r/20240519221457.772346-3-minwoo.im@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The MCQ_OPR_OFFSET_n macro takes 'hba' in the caller context without
receiving 'hba' instance as an argument. To prevent potential bugs in
future use cases, add an argument 'hba'.
Fixes: 2468da61ea ("scsi: ufs: core: mcq: Configure operation and runtime interface")
Cc: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Link: https://lore.kernel.org/r/20240519221457.772346-2-minwoo.im@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
An error unrelated to ufshcd_try_to_abort_task is being logged and can
cause confusion. Modify ufshcd_mcq_abort() to print the result of the abort
failure. For readability, return immediately instead of 'goto'.
Fixes: f1304d4420 ("scsi: ufs: mcq: Added ufshcd_mcq_abort()")
Signed-off-by: Chanwoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20240524015904.1116005-1-cw9316.lee@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Given the importance of the RTT parameter, we want to be able to configure
it via sysfs. This is because UFS users should be discouraged from change
UFS device parameters without the UFSHCI driver being aware of these
changes.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240530142510.734-4-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The rtt-upiu packets precede any data-out upiu packets, thus synchronizing
the data input to the device: this mostly applies to write operations, but
there are other operations that requires rtt as well.
There are several rules binding this rtt - data-out dialog, specifically
There can be at most outstanding bMaxNumOfRTT such packets. This might
have an effect on write performance (sequential write in particular), as
each data-out upiu must wait for its rtt sibling.
UFSHCI expects bMaxNumOfRTT to be min(bDeviceRTTCap, NORTT). However, as of
today, there does not appears to be no-one who sets it: not the host
controller nor the driver. It wasn't an issue up to now: bMaxNumOfRTT is
set to 2 after manufacturing, and wasn't limiting the write performance.
UFS4.0, and specifically gear 5 changes this, and requires the device to be
more attentive. This doesn't come free - the device has to allocate more
resources to that end, but the sequential write performance improvement is
significant. Early measurements shows 25% gain when moving from rtt 2 to
9. Therefore, set bMaxNumOfRTT to be min(bDeviceRTTCap, NORTT) as UFSHCI
expects.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240530142510.734-2-avri.altman@wdc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers. The remaining patches are assorted minor fixes and
deprecated function updates plus a bit of constification.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZkOnWyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYe7AP93XRN/
xnccJbSTTUL4FFGobq2CYXv58Na+FM/b/+/kEAD+PNi0LmHDdDTOaFUblMd9l4lj
mpvYLRvJ6ifnHX6WXAg=
=PVnL
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers.
The remaining patches are assorted minor fixes and deprecated function
updates plus a bit of constification"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: mpi3mr: Sanitise num_phys
scsi: lpfc: Copyright updates for 14.4.0.2 patches
scsi: lpfc: Update lpfc version to 14.4.0.2
scsi: lpfc: Add support for 32 byte CDBs
scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
scsi: lpfc: Update logging of protection type for T10 DIF I/O
scsi: lpfc: Change default logging level for unsolicited CT MIB commands
scsi: target: Remove unused list 'device_list'
scsi: iscsi: Remove unused list 'connlist_err'
scsi: ufs: exynos: Add support for Tensor gs101 SoC
scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
scsi: ufs: exynos: Allow max frequencies up to 267Mhz
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
scsi: ufs: dt-bindings: exynos: Add gs101 compatible
scsi: qla2xxx: Fix debugfs output for fw_resource_count
scsi: qedf: Ensure the copied buf is NUL terminated
scsi: bfa: Ensure the copied buf is NUL terminated
...
