rx_callback is a standard mailbox callback mechanism and could cover the
function of proprietary cmdq_task_cb, so use the standard one instead of
the proprietary one. Client driver has changed to use standard
rx_callback, so remove proprietary cmdq_task_cb.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Fix following coccicheck warning:
WARNING: Function "for_each_child_of_node"
should have of_node_put() before return.
Early exits from for_each_child_of_node should decrement the
node reference counter.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
To make sure the GCE request signal to SPM is not trigger by
other HW modules and cause suspend premature wake.
Set 0x7 (the bit 0~2 as 1) to GCE_GCTL_VALUE, to configure the
request signal control by SW and release the request to SPM.
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Silent the error if it's EPROBE_DEFER for clks.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Because mt8192 only have 1 gce, the gce_num should be 1.
Fixes: 85dfdbfc13 ("mailbox: cmdq: add multi-gce clocks support for mt8195")
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
In the probe function, the clock IDs were pointed to local variables
which should only be used in the same code block, and any access to them
after the probing stage becomes an use-after-free case.
Since there are only limited variants of the gce clock names so far, we
can just declare them as static constants to fix the issue.
Fixes: 85dfdbfc13 ("mailbox: cmdq: add multi-gce clocks support for mt8195")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
of_alias_get_id() may return -ENODEV which leads to illegal access to
the cmdq->clocks array.
Adding a check over alias_id to prevent the unexpected behavior.
Fixes: 85dfdbfc13 ("mailbox: cmdq: add multi-gce clocks support for mt8195")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Because mtk_drm_crtc_update_config is not using cmdq_pkt_flush_async,
it won't have pkt->async_cb.cb anymore.
So remove the WARN_ON check of pkt->async_cb.cb at cmdq_exec_done.
Fixes: 1b6b0ce224 ("mailbox: mtk-cmdq: Use mailbox rx_callback")
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
For the design of GCE hardware event signal transportation,
evnet rx will send the event signal to all GCE event merges
after receiving the event signal from the other hardware.
Because GCE event merges need to response to event rx, their
clocks must be enabled at that time.
To make sure all the gce clock is enabled while receiving the
hardware event, each cmdq mailbox should enable or disable
the others gce clk at the same time.
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add mt8195 compatible name in the driver data of cmdq mailbox driver.
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The "cb" pointer needs to be initialized before can assign
"data.data = cb->data;".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Current client use 'struct cmdq_pkt' as callback data, so
change 'void *data' to 'struct cmdq_pkt *pkt'. Keep data
until client use pkt instead of data.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
rx_callback is a standard mailbox callback mechanism and could cover the
function of proprietary cmdq_task_cb, so use the standard one instead of
the proprietary one. But the client driver has already used cmdq_task_cb,
so keep cmdq_task_cb until all client driver use rx_callback instead of
cmdq_task_cb.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
cmdq_cb_status is an error status. Use the standard error number
instead of cmdq_cb_status to prevent status duplication.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
platform_get_irq() returns -ERRNO on error. In such case casting to u32
and comparing to 0 would pass the check.
Fixes: 623a6143a8 ("mailbox: mediatek: Add Mediatek CMDQ driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Do success callback in channel when shutdown. For those task not finish,
callback with error code thus client has chance to cleanup or reset.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add gce v4 hardware support with different thread number and shift.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Some gce hardware shift pc and end address in register to support
large dram addressing.
Implement gce address shift when write or read pc and end register.
And add shift bit in platform definition.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
After implement flush, client can flush the executing
command buffer or abort the still waiting for event
command buffer, so controller do not need to implement
atomic_exe feature. remove it.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
For client driver which need to reorganize the command buffer, it could
use this function to flush the send command buffer.
If the channel doesn't be started (usually in waiting for event), this
function will abort it directly.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
GCE hardware stored event information in own internal sysram,
if the initial value in those sysram is not zero value
it will cause a situation that gce can wait the event immediately
after client ask gce to wait event but not really trigger the
corresponding hardware.
In order to make sure that the wait event function is
exactly correct, we need to clear the sysram value in
cmdq initial flow.
Fixes: 623a6143a8 ("mailbox: mediatek: Add Mediatek CMDQ driver")
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
add mt8183 compatible name for supporting gce function
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The interrupt mask and thread number has positive correlation,
so we move the CMDQ_IRQ_MASK into cmdq driver data and calculate
it by thread number.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Memory allocated through device-managed functions doesn't need to be
explicitly freed, so these calls can be removed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Get rid of some boilerplate driver removal code by using the newly added
device-managed registration API.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This patch is first version of Mediatek Command Queue(CMDQ) driver. The
CMDQ is used to help write registers with critical time limitation,
such as updating display configuration during the vblank. It controls
Global Command Engine (GCE) hardware to achieve this requirement.
Currently, CMDQ only supports display related hardwares, but we expect
it can be extended to other hardwares for future requirements.
Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: HS Liao <hs.liao@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
