mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 08:14:15 +08:00
82cf5d1fb9
31475 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Frank Li
|
c7ad422f0e |
arm64: dts: layerscape: add msi-cell = <1> for gic its
Add msi-cell = <1> for GIC ITS. msi-parent have to be kept because it is
checked by U-Boot due to historical reasons to fix up msi-map.
Fix below CHECK_DTBS warning:
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb: interrupt-controller@6000000: msi-controller@6020000: '#msi-cells' is a required property
from schema $id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
||
|
Frank Li
|
8b35a4acea |
arm64: dts: fsl-ls1028a: add fsl,ls1028-reset for syscon
Add platform specific compatiable string 'fsl,ls1028-reset' for syscon and
move reboot node under reset syscon node to fix below warning.
syscon@1e60000: compatible: 'anyOf' conditional failed, one must be fixed:
['syscon'] is too short
'syscon' is not one of ['al,alpine-sysfabric-service', ...
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
||
|
Frank Li
|
e32faab60d |
arm64: dts: fsl-ls1043a: change uqe to uqe-bus and remove #address-cells
Change node name 'uqe' to 'uqe-bus'. Remove #address-cells and #size-cells for nodes, which have not child node. Fix below CHECK_DTBS warning: arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: uqe@2400000: si@700: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe.yaml# arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: uqe@2400000: siram@1000: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe.yaml# arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: uqe@2400000: $nodename:0: 'uqe@2400000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe.yaml# arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: uqe@2400000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'qeic@80', 'ucc@2000', 'ucc@2200' were unexpected) from schema $id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe.yaml# arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: qeic@80: '#address-cells' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-ic.yaml# arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: si@700: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-si.yaml# arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: siram@1000: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-siram.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Frank Li
|
2950f80bef |
arm64: dts: layerscape: use common pcs-handle property
pcsphy-handle already deprecated according to binding fsl,fman-dtsec.yaml.
Add new common pcs-handle at dts and fix below CHECK_DTBS warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: fman@1a00000: ethernet@e0000: 'pcs-handle' is a dependency of 'pcs-handle-names'
from schema $id: http://devicetree.org/schemas/net/fsl,fman.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
||
|
Frank Li
|
e39f567e1c |
arm64: dts: layerscape: rename rcpm as wakeup-control from power-control
Invoke power-domain.yaml if node name as 'power-control'.
Rcpm actually are not power domain controller. It just control wakeup
capability. So rename it as wakeup-control. Fix below CHECK_DTBS warning.
power-controller@1ee2140: '#power-domain-cells' is a required property
from schema $id: http://devicetree.org/schemas/power/power-domain.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
||
|
Frank Li
|
61a3e037b8 |
arm64: dts: layerscape: rename aux-bus to bus
The node name 'aux-bus' is special word. It invokes dp-aux-bus.yaml binding check. Simple change to 'bus' to fix below warning. aux-bus: '#address-cells', '#size-cells', 'compatible', 'dma-ranges', 'ranges', 'sata@3200000', 'usb@2f00000', 'usb@3000000', 'usb@3100000' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/display/dp-aux-bus.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Marcel Ziswiler
|
d51f75270a |
arm64: dts: imx8mp-verdin: drop limit to sdio wi-fi frequency to 100 mhz
SDIO frequency was limited to workaround some instabilities, however it
turned out that the instability had nothing to do with the speed but was
because of an issue with the USDHC IP that was fixed in
commit
|
||
Peng Fan
|
331c038a95 |
arm64: dts: imx93: add cache info
i.MX93 features two Cortex-A55 cores with per core L1 Instruction cache size 32KB, L1 data cache size 32KB, per core L2 cache 64KB, and unified 256KB L3 cache. Add the cache info to remove cacheinfo warnings at boot: "cacheinfo: Unable to detect cache hierarchy for CPU 0" Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Clark Wang
|
280899d46f |
arm64: dts: imx8-ss-dma: enable dma support for lpspi
Add DMA configurations for LPSPI nodes on i.MX8QX/QM/DXL. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Shengjiu Wang
|
06980320c8 |
arm64: dts: imx93-11x11-evk: Add audio XCVR sound card
Add audio XCVR sound card, which supports SPDIF TX & RX only, eARC RX, ARC RX are not supported. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Shengjiu Wang
|
fcfa86b3e0 |
arm64: dts: imx93-11x11-evk: Add PDM microphone sound card support
Add PDM micphone sound card support, configure the pinmux. This sound card supports recording sound from PDM microphone and convert the PDM format data to PCM data. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Shengjiu Wang
|
198aa4706c |
arm64: dts: imx93-11x11-evk: add bt-sco sound card support
Add bt-sco sound card, which is used by BT HFP case. It supports wb profile as default Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Shengjiu Wang
|
f5639dfb03 |
arm64: dts: imx93: Add #sound-dai-cells property
Add #sound-dai-cells property for audio cpu dai modules '#sound-dai-cells' is required to properly interpret the list of DAI specified in the 'sound-dai' property, Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Tarang Raval
|
38e93270fd |
arm64: dts: imx8mm-emtop-baseboard: Add Ethernet Support
Add ethernet support for emtop imx8mm baseboard Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Andrei Stefanescu
|
d82a4f5c95 |
arm64: dts: s32g: add the pinctrl node
Add the pinctrl node in the device tree in order to enable the S32G2/S32G3 pinctrl driver to probe. Signed-off-by: Andrei Stefanescu <andrei.stefanescu@oss.nxp.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Markus Niebel
|
b4167d9757 |
arm64: dts: freescale: imx93-tqma9352: improve pad configuration
- disable PU/PD if already done with external resistors - do not configure Schmitt Trigger for outputs - do not configure DSE / FSEL for inputs Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Alexander Stein
|
be9885cee3 |
arm64: dts: imx8mm-tqma8mqml-mba8mx: Increase frequency for i2c busses
100kHz is only needed for the USB Hub TUSB8041. But as this device is not connected by default, the speed can be increased. The other busses don't have any 100kHz only devices attached. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Alexander Stein
|
f2fd0ca4fe |
arm64: dts: imx8-ss-dma: Fix adc0 closing brace location
Align the closing brace to opening line.
Fixes:
|
||
|
Alexander Stein
|
33b49409f0 |
arm64: dts: imx8-ss-dma: add #address-cells and #size-cells to LPI2C nodes
These properties are required by i2c-controller.yaml bindings. Add them on SoC level, rather than on board level. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Conor Dooley
|
9f92b047d0 |
arm64: dts: imx8: remove non-existent DACs
Neither the imx8dxl-evk or imx8qm-mek have a Rohm DAC on them as far as I can tell from online documentation, and they certainly do not have a dh2228fv, as this device does not actually exist! Remove the DAC nodes from the devicetrees as it is not acceptable to pretend to have a device on a board in order to bind the spidev driver in Linux. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Andrej Picej
|
128cc36bda |
arm64: dts: imx8mp-phyboard-pollux: Disable write-protect on SD card
Micro SD cards can't be physically write-protected like full-sized cards. Disable this feature in device-tree to get rid of the kernel warning: "host does not support reading read-only switch, assuming write-enable" Signed-off-by: Andrej Picej <andrej.picej@norik.com> Reviewed-by: Benjamin Hahn <B.Hahn@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Benjamin Hahn
|
64c9c977c8 |
arm64: dts: freescale: imx8mp-phycore: Add no-eth overlay
Add a devicetree overlay to disable ethernet for boards where it is not populated. Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Ciprian Costea
|
3d2ce0fbcd |
arm64: dts: s32g: Disable usdhc write-protect
NXP S32G2/S32G3 SoC based platforms do not use a pin for SD-Card write protection used by the uSDHC controller. Hence, adding 'disable-wp' usdhc device-tree property in order to fix observed warnings on SD boot as the following: "host does not support reading read-only switch, assuming write-enable" Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Fabio Estevam
|
f384d2828f |
arm64: dts: imx8mm-venice-gw72xx-0x: Remove compatible from dtso
There is no need to describe the compatible string inside a dtso file. dt-schema produces super verbose warnings about that. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Parthiban Nallathambi <parthiban@linumiz.com> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Fabio Estevam
|
c716fb7eff |
arm64: dts: imx8mm-phygate-tauri-l: Remove compatible from dtso
There is no need to describe the compatible string inside a dtso file. dt-schema produces super verbose warnings about that. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Parthiban Nallathambi <parthiban@linumiz.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Frank Li
|
7500e5b370 |
arm64: dts: imx95-19x19-evk: add pwm fan control
Add pwm fan and overwrite default thermal nodes. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Frank Li
|
3d282d5cc8 |
arm64: dts: imx95: add thermal_zone label
Add thermal_zone label because it may be overwrite by board level dts file. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Frank Li
|
cb68151272 |
arm64: dts: imx95-19x19-evk: add flexspi and child node
Add flexspi and child flash node. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Frank Li
|
a748b411d6 |
arm64: dts: imx95: add flexspi node
Add flexspi support. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Frank Li
|
288c31c92f |
arm64: dts: imx95-19x19-evk: Add audio related nodes
Add sai1, sai2. Add i2c4 and wm8962 and other dependent nodes. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Frank Li
|
70fd1f6641 |
arm64: dts: imx95: add sai[1..6], xcvr and micfill
Add sai[1..6], NXP Audio Transceiver (XCVR) Controller and MICFIL Digital Audio Interface (MICFIL). Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Frank Li
|
915fd2e127 |
arm64: dts: imx95: add edma[1..3] nodes
Add eDMA1, eDMA2 and eDMA3 support for iMX95. Add dmas and dma-names for each peripheral, which use eDMA. Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Peng Fan
|
0481dadbc5 |
arm64: dts: imx93: support i.MX93-14x14-EVK board
Add the board device tree with sdhc1/2, cm33, flexcan, mu, lpuart1, lpi2c1/2, usb enabled and etc, which to support the i.MX 93 14x14 Evaluation kit that is an automotive market oriented evaluation board with i.MX 93 application processors in a 14x14mm package. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Peng Fan
|
1bf641c514 |
arm64: dts: imx93: drop duplicated properties
'#address-cells' and '#size-cells' are already included in soc device tree, no need add them in board device tree. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
|
Peng Fan
|
b06402b31d |
arm64: dts: imx95: add p2a reply channel
For Platform to Agent(p2a) notification, i.MX95 System Manager(SM) firmware requires a reply communication. So add mailbox channel for p2a reply communication. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Linus Torvalds
|
c9f33436d8 |
RISC-V Patches for the 6.11 Merge Window, Part 2
* Support for NUMA (via SRAT and SLIT), console output (via SPCR), and cache info (via PPTT) on ACPI-based systems. * The trap entry/exit code no longer breaks the return address stack predictor on many systems, which results in an improvement to trap latency. * Support for HAVE_ARCH_STACKLEAK. * The sv39 linear map has been extended to support 128GiB mappings. * The frequency of the mtime CSR is now visible via hwprobe. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmaj2EYTHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiVG3D/9kNHTI09iPDJd6fTChE3cpMxy7xXXE URX3Avu+gYsJmIbYyg4RnQ8FGFN7icKBCrQqs7JmLliU0NU+YMcCcjsJA2QaivbD VAlaex1qNcvNGteHrpbqhr3Zs4zw8GlBkB3KFTLyPAp61bybGo0a/A5ONJ7ScQIW RWHewAPgb86cQ0Q34JpO87TqvMM0KMvhQP5dip+olaFjLRBzhXmGFZfHqA80kTWl 0ytYclVCHZMtO/5mnQpuIOVs1IKw9L4wa0sivOQF0iLTqfKDFALa6yZsThHA/w3e JVuBAdQhcPZ3fgO2fUfJPlW16GmRC2/tdiFg5NFw8k4vo7DYBwX55ztPKXqDrJDM 8ah85IeLiPar/A/uHdn6bPjK+aGMuzklKF50r62XXAc2fL8mza1sdvKCVOy2EOLn JyGI9c/10KpvN/DW8g7hPefhvbx4+tCKkFcPqf++VQha6W8cQdCKi+Li0Pm8TTnp XPQjIvSlDDG1Pl4ofgBSFoyB8pkBXNzvv8NZp+YYtnqSOLAKaZuP+KwA8TwHdvGM pdCXcL3KHiLy4/pJWEoNTutD0mbJ7PUIb2P/KkjqYDgp4F1n0Hg+/aeSIp+7a4Pv yTBctIGxrlriQMIdtWCR8tyhcPP4pDpGYkW0K15EE16G0NK0fjD89LEXYqT6ae2R C0QgiwnVe/eopg== =zeUn -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for NUMA (via SRAT and SLIT), console output (via SPCR), and cache info (via PPTT) on ACPI-based systems. - The trap entry/exit code no longer breaks the return address stack predictor on many systems, which results in an improvement to trap latency. - Support for HAVE_ARCH_STACKLEAK. - The sv39 linear map has been extended to support 128GiB mappings. - The frequency of the mtime CSR is now visible via hwprobe. * tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits) RISC-V: Provide the frequency of time CSR via hwprobe riscv: Extend sv39 linear mapping max size to 128G riscv: enable HAVE_ARCH_STACKLEAK riscv: signal: Remove unlikely() from WARN_ON() condition riscv: Improve exception and system call latency RISC-V: Select ACPI PPTT drivers riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init() RISC-V: ACPI: Enable SPCR table for console output on RISC-V riscv: boot: remove duplicated targets line trace: riscv: Remove deprecated kprobe on ftrace support riscv: cpufeature: Extract common elements from extension checking riscv: Introduce vendor variants of extension helpers riscv: Add vendor extensions to /proc/cpuinfo riscv: Extend cpufeature.c to detect vendor extensions RISC-V: run savedefconfig for defconfig RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init ACPI: NUMA: change the ACPI_NUMA to a hidden option ACPI: NUMA: Add handler for SRAT RINTC affinity structure ... |
||
|
Linus Torvalds
|
a6294b5b1f |
arm64 fixes for -rc1
- Remove some redundant Kconfig conditionals - Fix string output in ptrace selftest - Fix fast GUP crashes in some page-table configurations - Remove obsolete linker option when building the vDSO - Fix some sysreg field definitions for the GIC -----BEGIN PGP SIGNATURE----- iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmaiSAMQHHdpbGxAa2Vy bmVsLm9yZwAKCRC3rHDchMFjNJ8PB/9lyDbJ+qTNwECGKtz+vOAbronZncJy4yzd ElPRNeQ+B7QqrrYZM2TCrz6/ppeKXp0OurwNk9vKBqzrCfy/D6kKXWfcOYqeWlyI C2NImLHZgC6pIRwF3GlJ/E0VDtf/wQsJoWk7ikVssPtyIWOufafaB53FRacc1vnf bmEpcdXox+FsTG4q8YhBE6DZnqqQTnm7MvAt4wgskk6tTyKj/FuQmSk50ZW22oXb G2UOZxhYZV7IIXlRaClsY/iv62pTfMYlqDAvZeH81aiol/vfYXVFSeca5Mca67Ji P1o8HPd++hTw9WVyCrrbSGcZ/XNs96yTmahJWM+eneiV7OzKxj4v =Mr4K -----END PGP SIGNATURE----- Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The usual summary below, but the main fix is for the fast GUP lockless page-table walk when we have a combination of compile-time and run-time folding of the p4d and the pud respectively. - Remove some redundant Kconfig conditionals - Fix string output in ptrace selftest - Fix fast GUP crashes in some page-table configurations - Remove obsolete linker option when building the vDSO - Fix some sysreg field definitions for the GIC" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: Fix lockless walks with static and dynamic page-table folding arm64/sysreg: Correct the values for GICv4.1 arm64/vdso: Remove --hash-style=sysv kselftest: missing arg in ptrace.c arm64/Kconfig: Remove redundant 'if HAVE_FUNCTION_GRAPH_TRACER' arm64: remove redundant 'if HAVE_ARCH_KASAN' in Kconfig |
||
|
Linus Torvalds
|
4c7be57f27 |
arm64: allow installing compressed image by default
On arm64 we build compressed images, but "make install" by default will install the old non-compressed one. To actually get the compressed image install, you need to use "make zinstall", which is not the usual way to install a kernel. Which may not sound like much of an issue, but when you deal with multiple architectures (and years of your fingers knowing the regular "make install" incantation), this inconsistency is pretty annoying. But as Will Deacon says: "Sadly, bootloaders being as top quality as you might expect, I don't think we're in a position to rely on decompressor support across the board. Our Image.gz is literally just that -- we don't have a built-in decompressor (nor do I think we want to rush into that again after the fun we had on arm32) and the recent EFI zboot support solves that problem for platforms using EFI. Changing the default 'install' target terrifies me. There are bound to be folks with embedded boards who've scripted this and we could really ruin their day if we quietly give them a compressed kernel that their bootloader doesn't know how to handle :/" So make this conditional on a new "COMPRESSED_INSTALL" option. Cc: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Will Deacon
|
36639013b3 |
arm64: mm: Fix lockless walks with static and dynamic page-table folding
Lina reports random oopsen originating from the fast GUP code when
16K pages are used with 4-level page-tables, the fourth level being
folded at runtime due to lack of LPA2.
In this configuration, the generic implementation of
p4d_offset_lockless() will return a 'p4d_t *' corresponding to the
'pgd_t' allocated on the stack of the caller, gup_fast_pgd_range().
This is normally fine, but when the fourth level of page-table is folded
at runtime, pud_offset_lockless() will offset from the address of the
'p4d_t' to calculate the address of the PUD in the same page-table page.
This results in a stray stack read when the 'p4d_t' has been allocated
on the stack and can send the walker into the weeds.
Fix the problem by providing our own definition of p4d_offset_lockless()
when CONFIG_PGTABLE_LEVELS <= 4 which returns the real page-table
pointer rather than the address of the local stack variable.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/50360968-13fb-4e6f-8f52-1725b3177215@asahilina.net
Fixes:
|
||
Joel Granados
|
78eb4ea25c |
sysctl: treewide: constify the ctl_table argument of proc_handlers
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
||
|
Linus Torvalds
|
ca83c61cb3 |
Kbuild updates for v6.11
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_DEBUG_INFO_BTF
and CONFIG_KALLSYMS
- Enable the warning for symbol reference to .exit.* sections by default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate base
DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
-----BEGIN PGP SIGNATURE-----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=BYu7
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_KALLSYMS and
CONFIG_DEBUG_INFO_BTF
- Enable the warning for symbol reference to .exit.* sections by
default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate
base DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
kbuild: doc: gcc to CC change
kallsyms: change sym_entry::percpu_absolute to bool type
kallsyms: unify seq and start_pos fields of struct sym_entry
kallsyms: add more original symbol type/name in comment lines
kallsyms: use \t instead of a tab in printf()
kallsyms: avoid repeated calculation of array size for markers
kbuild: add script and target to generate pacman package
modpost: use generic macros for hash table implementation
kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
Makefile: add comment to discourage tools/* addition for kernel builds
kbuild: clean up scripts/remove-stale-files
kconfig: recursive checks drop file/lineno
kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
kallsyms: get rid of code for absolute kallsyms
kbuild: Create INSTALL_PATH directory if it does not exist
kbuild: Abort make on install failures
kconfig: remove 'e1' and 'e2' macros from expression deduplication
kconfig: remove SYMBOL_CHOICEVAL flag
kconfig: add const qualifiers to several function arguments
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
...
|
||
Raghavendra Rao Ananta
|
f3dfcd2545 |
arm64/sysreg: Correct the values for GICv4.1
Currently, sysreg has value as 0b0010 for the presence of GICv4.1 in ID_PFR1_EL1 and ID_AA64PFR0_EL1, instead of 0b0011 as per ARM ARM. Hence, correct them to reflect ARM ARM. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20240718215532.616447-1-rananta@google.com Signed-off-by: Will Deacon <will@kernel.org> |
||
Fangrui Song
|
48f6430505 |
arm64/vdso: Remove --hash-style=sysv
glibc added support for .gnu.hash in 2006 and .hash has been obsoleted
for more than one decade in many Linux distributions. Using
--hash-style=sysv might imply unaddressed issues and confuse readers.
Just drop the option and rely on the linker default, which is likely
"both", or "gnu" when the distribution really wants to eliminate sysv
hash overhead.
Similar to commit
|
||
Anshuman Khandual
|
add6128fc7 |
arm64/Kconfig: Remove redundant 'if HAVE_FUNCTION_GRAPH_TRACER'
Since the commit |
||
Masahiro Yamada
|
62e2397c22 |
arm64: remove redundant 'if HAVE_ARCH_KASAN' in Kconfig
Since commit
|
||
|
Linus Torvalds
|
ac7473a179 |
Updates for the interrupt subsystem:
- Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to expand
any of this for new required functionality.
The new function takes a pointer to a data structure as argument. The
data structure combines all existing parameters and allows for easy
extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization before
the new domain is published, so that concurrent usage sites won't see
a half initialized interrupt domain. Similar problems exist on
teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible workarounds
at the driver level.
- The usual small improvements all over the place
- Drivers
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version to
allow building the latter as a module for multi-platform kernels.
- Enable MSI support for Armada 370XP on platforms which do not support
IPIs.
- The usual small fixes and enhancements all over the place.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmaVJbUTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoXTuD/9Tc9BhY5CW7HQkdPQu2Db1O+esprkQ
Uo9lMpTTpPiy9btg4LONzLf4mjbufZpyKBxkRWoZFO0Zj5q4UE9NZYh7EcxrF5Tl
CIFJmyteLsYuOyCmPrtSDSovonXjQKYBE3u2LVJNNkwEkhYbYW9sqIKeT8nneLv6
53gd28ESFUEUjHNTblw/eXviweyUKSXc0qyg+3hgZQPMoh9RkdkEPvyaw9Y/s5Ce
FelLLxzMqX86dR2TJMLqiaGiMpUu/kl+Yz2m5c77TwA2D68qjhHywbtKtlH7b3C6
LMHu2dMrrKSJrLL8roVIYJdHAd1TKWVdnYhqv9WBHFTu1sDuztpR44mewbo8exUU
L2RgVSGYNmeFC3p4wztWYSQfIVa9uOg7+TnJJdh7G0jLIeKM/TbufWqDAJAuoVPL
QhGbZ5xNbZJZ8bvhhItjxpRN/kPs44p3mUGyRJBQzm+mDN118bqfmQzhLcwRbfE2
smp73SQzg9alG2rGdNVEqkKmp8zhg2Crx2VCeVdgbeOxWQRet9zLWcp4FfCEUE9e
eK3iEi8z+rmwafaf3rsxYdrdIRLaUmcni0v7R/16cJH/Cs7bU3Re8XyGhevo3lsO
pJiP5wZDxbckwXNpLm3S/qPDW7vSCnuFPF7QmOvC3a70PsD+E4NKUgiwJuHtn/ZV
pFBKzbQgCsowQA==
=QCRH
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to
expand any of this for new required functionality.
The new function takes a pointer to a data structure as argument.
The data structure combines all existing parameters and allows for
easy extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization
before the new domain is published, so that concurrent usage sites
won't see a half initialized interrupt domain. Similar problems
exist on teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible
workarounds at the driver level.
- The usual small improvements all over the place
Drivers:
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version
to allow building the latter as a module for multi-platform
kernels
- Enable MSI support for Armada 370XP on platforms which do not
support IPIs
- The usual small fixes and enhancements all over the place"
* tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
irqdomain: Fix the kernel-doc and plug it into Documentation
genirq: Set IRQF_COND_ONESHOT in request_irq()
irqchip/imx-irqsteer: Handle runtime power management correctly
irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info()
irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issued
irqchip/gic-v4: Substitute vmovp_lock for a per-VM lock
irqchip/gic-v4: Always configure affinity on VPE activation
Revert "irqchip/dw-apb-ictl: Support building as module"
Revert "Loongarch: Support loongarch avec"
arm64: Kconfig: Allow build irq-stm32mp-exti driver as module
ARM: stm32: Allow build irq-stm32mp-exti driver as module
irqchip/stm32mp-exti: Allow building as module
irqchip/stm32mp-exti: Rename internal symbols
irqchip/stm32-exti: Split MCU and MPU code
arm64: Kconfig: Select STM32MP_EXTI on STM32 platforms
ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7a
irqchip/stm32-exti: Add CONFIG_STM32MP_EXTI
irqchip/dw-apb-ictl: Support building as module
irqchip/riscv-aplic: Simplify the initialization code
...
|
||
Palmer Dabbelt
|
6a4aa4c94b
|
Merge patch series "Add ACPI NUMA support for RISC-V"
Haibo Xu <haibo1.xu@intel.com> says:
This patch series enable RISC-V ACPI NUMA support which was based on
the recently approved ACPI ECR[1].
Patch 1/4 add RISC-V specific acpi_numa.c file to parse NUMA information
from SRAT and SLIT ACPI tables.
Patch 2/4 add the common SRAT RINTC affinity structure handler.
Patch 3/4 change the ACPI_NUMA to a hidden option since it would be selected
by default on all supported platform.
Patch 4/4 replace pr_info with pr_debug in arch_acpi_numa_init() to avoid
potential boot noise on ACPI platforms that are not NUMA.
Based-on: https://github.com/linux-riscv/linux-riscv/tree/for-next
[1] https://drive.google.com/file/d/1YTdDx2IPm5IeZjAW932EYU-tUtgS08tX/view?usp=sharing
Testing:
Since the ACPI AIA/PLIC support patch set is still under upstream review,
hence it is tested using the poll based HVC SBI console and RAM disk.
1) Build latest Qemu with the following patch backported
|
||
Haibo Xu
|
adc3e82d25
|
ACPI: NUMA: change the ACPI_NUMA to a hidden option
x86/arm64/loongarch would select ACPI_NUMA by default and riscv would do the same thing, so change it to a hidden option and the select statements except for the X86_64_ACPI_NUMA can also go away. Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Sunil V L <sunilvl@ventanamicro.com> Signed-off-by: Haibo Xu <haibo1.xu@intel.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Huacai Chen <chenhuacai@loongson.cn> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/f1f96377b8ecd6e3183f28abf5c9ac21cb9855ea.1718268003.git.haibo1.xu@intel.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Linus Torvalds
|
fbc90c042c |
- 875fa64577 ("mm/hugetlb_vmemmap: fix race with speculative PFN
walkers") is known to cause a performance regression (https://lore.kernel.org/all/3acefad9-96e5-4681-8014-827d6be71c7a@linux.ibm.com/T/#mfa809800a7862fb5bdf834c6f71a3a5113eb83ff). Yu has a fix which I'll send along later via the hotfixes branch. - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Is anyone reading this stuff? If so, email me! - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2C+QAKCRDdBJ7gKXxA joTkAQDvjqOoFStqk4GU3OXMYB7WCU/ZQMFG0iuu1EEwTVDZ4QEA8CnG7seek1R3 xEoo+vw0sWWeLV3qzsxnCA1BJ8cTJA8= =z0Lf -----END PGP SIGNATURE----- Merge tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. * tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits) mm/mglru: fix ineffective protection calculation mm/zswap: fix a white space issue mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio mm/hugetlb: fix possible recursive locking detected warning mm/gup: clear the LRU flag of a page before adding to LRU batch mm/numa_balancing: teach mpol_to_str about the balancing mode mm: memcg1: convert charge move flags to unsigned long long alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting lib: reuse page_ext_data() to obtain codetag_ref lib: add missing newline character in the warning message mm/mglru: fix overshooting shrinker memory mm/mglru: fix div-by-zero in vmpressure_calc_level() mm/kmemleak: replace strncpy() with strscpy() mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB mm: ignore data-race in __swap_writepage hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr mm: shmem: rename mTHP shmem counters mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async() mm/migrate: putback split folios when numa hint migration fails ... |
||
|
Linus Torvalds
|
2c9b351240 |
ARM:
* Initial infrastructure for shadow stage-2 MMUs, as part of nested virtualization enablement * Support for userspace changes to the guest CTR_EL0 value, enabling (in part) migration of VMs between heterogenous hardware * Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of the protocol * FPSIMD/SVE support for nested, including merged trap configuration and exception routing * New command-line parameter to control the WFx trap behavior under KVM * Introduce kCFI hardening in the EL2 hypervisor * Fixes + cleanups for handling presence/absence of FEAT_TCRX * Miscellaneous fixes + documentation updates LoongArch: * Add paravirt steal time support. * Add support for KVM_DIRTY_LOG_INITIALLY_SET. * Add perf kvm-stat support for loongarch. RISC-V: * Redirect AMO load/store access fault traps to guest * perf kvm stat support * Use guest files for IMSIC virtualization, when available ONE_REG support for the Zimop, Zcmop, Zca, Zcf, Zcd, Zcb and Zawrs ISA extensions is coming through the RISC-V tree. s390: * Assortment of tiny fixes which are not time critical x86: * Fixes for Xen emulation. * Add a global struct to consolidate tracking of host values, e.g. EFER * Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC bus frequency, because TDX. * Print the name of the APICv/AVIC inhibits in the relevant tracepoint. * Clean up KVM's handling of vendor specific emulation to consistently act on "compatible with Intel/AMD", versus checking for a specific vendor. * Drop MTRR virtualization, and instead always honor guest PAT on CPUs that support self-snoop. * Update to the newfangled Intel CPU FMS infrastructure. * Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads '0' and writes from userspace are ignored. * Misc cleanups x86 - MMU: * Small cleanups, renames and refactoring extracted from the upcoming Intel TDX support. * Don't allocate kvm_mmu_page.shadowed_translation for shadow pages that can't hold leafs SPTEs. * Unconditionally drop mmu_lock when allocating TDP MMU page tables for eager page splitting, to avoid stalling vCPUs when splitting huge pages. * Bug the VM instead of simply warning if KVM tries to split a SPTE that is non-present or not-huge. KVM is guaranteed to end up in a broken state because the callers fully expect a valid SPTE, it's all but dangerous to let more MMU changes happen afterwards. x86 - AMD: * Make per-CPU save_area allocations NUMA-aware. * Force sev_es_host_save_area() to be inlined to avoid calling into an instrumentable function from noinstr code. * Base support for running SEV-SNP guests. API-wise, this includes a new KVM_X86_SNP_VM type, encrypting/measure the initial image into guest memory, and finalizing it before launching it. Internally, there are some gmem/mmu hooks needed to prepare gmem-allocated pages before mapping them into guest private memory ranges. This includes basic support for attestation guest requests, enough to say that KVM supports the GHCB 2.0 specification. There is no support yet for loading into the firmware those signing keys to be used for attestation requests, and therefore no need yet for the host to provide certificate data for those keys. To support fetching certificate data from userspace, a new KVM exit type will be needed to handle fetching the certificate from userspace. An attempt to define a new KVM_EXIT_COCO/KVM_EXIT_COCO_REQ_CERTS exit type to handle this was introduced in v1 of this patchset, but is still being discussed by community, so for now this patchset only implements a stub version of SNP Extended Guest Requests that does not provide certificate data. x86 - Intel: * Remove an unnecessary EPT TLB flush when enabling hardware. * Fix a series of bugs that cause KVM to fail to detect nested pending posted interrupts as valid wake eents for a vCPU executing HLT in L2 (with HLT-exiting disable by L1). * KVM: x86: Suppress MMIO that is triggered during task switch emulation Explicitly suppress userspace emulated MMIO exits that are triggered when emulating a task switch as KVM doesn't support userspace MMIO during complex (multi-step) emulation. Silently ignoring the exit request can result in the WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace for some other reason prior to purging mmio_needed. See commit |
||
Zhang Bingwu
|
af7925d820 |
kbuild: Abort make on install failures
Setting '-e' flag tells shells to exit with error exit code immediately after any of commands fails, and causes make(1) to regard recipes as failed. Before this, make will still continue to succeed even after the installation failed, for example, for insufficient permission or directory does not exist. Signed-off-by: Zhang Bingwu <xtexchooser@duck.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
|
Linus Torvalds
|
04d17331ca |
USB/Thunderbolt updates for 6.11-rc1
Here is the big set of USB and Thunderbolt changes for 6.11-rc1.
Nothing earth-shattering in here, just constant forward progress in
adding support for new hardware and better debugging functionalities for
thunderbolt devices and the subsystem. Included in here are:
- thunderbolt debugging update and driver additions
- xhci driver updates
- typec driver updates
- kselftest device driver changes (acked by the relevant maintainers,
depended on other changes in this tree.)
- cdns3 driver updates
- gadget driver updates
- MODULE_DESCRIPTION() additions
- dwc3 driver updates and fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppaNA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXZwCgrEtIAQw0x6EF7w/iTWVS5UJj9AEAoLCj5UwO
WX978uThyUctuYYKbw+8
=Cm7j
-----END PGP SIGNATURE-----
Merge tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.11-rc1.
Nothing earth-shattering in here, just constant forward progress in
adding support for new hardware and better debugging functionalities
for thunderbolt devices and the subsystem. Included in here are:
- thunderbolt debugging update and driver additions
- xhci driver updates
- typec driver updates
- kselftest device driver changes (acked by the relevant maintainers,
depended on other changes in this tree.)
- cdns3 driver updates
- gadget driver updates
- MODULE_DESCRIPTION() additions
- dwc3 driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (112 commits)
kselftest: devices: Add test to detect device error logs
kselftest: Move ksft helper module to common directory
kselftest: devices: Move discoverable devices test to subdirectory
usb: gadget: f_uac2: fix non-newline-terminated function name
USB: uas: Implement the new shutdown callback
USB: core: add 'shutdown' callback to usb_driver
usb: typec: Drop explicit initialization of struct i2c_device_id::driver_data to 0
usb: dwc3: enable CCI support for AMD-xilinx DWC3 controller
usb: dwc2: add support for other Lantiq SoCs
usb: gadget: Use u16 types for 16-bit fields
usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup
usb: dwc3: core: Check all ports when set phy suspend
usb: typec: tcpci: add support to set connector orientation
dt-bindings: usb: Convert fsl-usb to yaml
usb: typec: ucsi: reorder operations in ucsi_run_command()
usb: typec: ucsi: extract common code for command handling
usb: typec: ucsi: inline ucsi_read_message_in
usb: typec: ucsi: rework command execution functions
usb: typec: ucsi: split read operation
usb: typec: ucsi: simplify command sending API
...
|
||
|
Linus Torvalds
|
9c67f9084a |
power sequencing fixes for v6.11-rc1
- fix an invalid pointer dereference in error path in pwrseq core - reduce the Kconfig noise from PCI pwrctl choices -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmaaMYkACgkQEacuoBRx 13L0Uw/+JdFxMWwQYKwWs84rKaALFtH4+vKzdZlyonGtTCl8X4wr5JX/jqfjBPof kO8FIKTIofWiiYkL3A5hvZbfuG9aINzOwle5nYhlSyeR5JN/ZJwVOKzfkFF1vcgK XJdxBZjD8wIB/foouleLH1+DhQu5d9BuB+NsANCcVo4IqAupK618NEVwTqRmQEPf M4JdmzVTRSVVnKS9RQ8MbXotfUSAI7GuvSCd+xs5SdTlBcgNNTLx4PUWhcLsSY5t oJ1TCx4a7MrDaFxjt8IvtsfGl0F5+0GNljxvcgSC/bckTzP6WAJJnCf8EIPpq95z HPx+7fvyKoScZbup+s2HEbRsqLUDQYFyZ8BjbkLBVn0NZSeJngFyEb2+A4JM/zK2 T2gGQk1Xe9HRwsWwi6Gd5wsL6kcknWdedh1B5m5zss2nIGXxO6Vw0Gz7U1dluS/P x/Olg2Le4oOahyFnsY4byG9hpO2898m/QHs7NMeCDZA3BEdXP2/+eVlASL6JZ2hl vRU8s6eheCBaI2iAUPF9Lc9+qtY4ry7b3DqCHDj11xxq+i4IwYErxs6ClsgpPBWZ l/VEPOFJYzFi1Y448uzn5vNPjPE7AsKn2Fl5ZERl7wTi4x8ZlJpVKiA3Cj3OPW1A hsuEOMJIVyZFEimexoIWK9sky9tY3mHsdhiE/AsF43Bj3aICTQE= =I1ot -----END PGP SIGNATURE----- Merge tag 'pwrseq-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull power sequencing fixes from Bartosz Golaszewski: "There's one fix for an invalid pointer dereference in error path reported by smatch and two patches that address the noisy config choices you reported earlier this week. Summary: - fix an invalid pointer dereference in error path in pwrseq core - reduce the Kconfig noise from PCI pwrctl choices" * tag 'pwrseq-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: arm64: qcom: don't select HAVE_PWRCTL when PCI=n Kconfig: reduce the amount of power sequencing noise power: sequencing: fix an invalid pointer dereference in error path |
||
|
Linus Torvalds
|
12cc3d5389 |
sound updates for 6.11-rc1
Lots of changes in this cycle, but mostly for cleanups and
refactoring. Significant amount of changes are about DT schema
conversions for ASoC at this time while we see other usual
suspects, too. Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS
v2.5 and WCD937x, Realtek RT1318 and RT1320 and Texas
Instruments PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmaZNdoOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE/PWw//XYFQ2v+bc0x62LI1rIEt1/mSz6R1moHf85fK
CjDOvHoGlZEkXuTmycK8b522/9tslHyE+8P97TZAy/6ph/yT44JgwQaadAvTZdWK
eKrchogf+v6DaQar8+nmXp8409HBcfJdrSJth2xR5OhY741/kGBF1/YCBHZaIQan
T87ag0tu1PVWQuLhdRlghkNYds+oaSX6wMaLRzVYI2TFYfHZOWYfVYd/NACb8KtO
z66TqybOxOpq4xCi+umNaGn2TxdDvo427JgioAKzcGLodowRKmqNV+mXddfrhBEE
Fwq4o8YGxgX+oaNn4aLQdrrREc1tuwQj0Kwpt/rkh4ESTgugcElq5hJCgPY8U3Ej
5+ih7ZeIojKnfjNivHuath7tXe1inqPEK3RBt3qMoUldIxNhJ8WfIF0RNzW/QRY2
g4JAI/4lswqPz6vYKULatDk+ZEW6PiV72kwW+4Vt7NxZnn9VFzP27qHuwkUHP5HM
0q4/NKrv+MFPedOLEeEm/1dmE7NRT4tRJuIV+RwMJ0cyP4l2jSCwyDpxfkFqGitc
wB0AXK3YLwISlKjziCox1cAex8F2XhjCdpOyOV6hTc3Dv/DySMHysv+4Uf4/kvst
3GrqdkMHy4cEUYj/Sj+VunfColsX2KnQAN+e4Sonn+5nPsw7ypGkpM1Kf+wTQuNK
EoxpzGo=
=hn0h
-----END PGP SIGNATURE-----
Merge tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes in this cycle, but mostly for cleanups and
refactoring.
Significant amount of changes are about DT schema conversions for ASoC
at this time while we see other usual suspects, too.
Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments
PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers"
* tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits)
kselftest/alsa: Log the PCM ID in pcm-test
kselftest/alsa: Use card name rather than number in test names
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
ALSA: seq: ump: Skip useless ports for static blocks
ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
ALSA: usb: Use BIT() for bit values
ALSA: usb: Fix UBSAN warning in parse_audio_unit()
ALSA: hda/realtek: Enable headset mic on Positivo SU C1400
ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume
ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply
ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings
ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable
ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
ASoC: cs530x: Remove bclk from private structure
ASoC: cs530x: Calculate proper bclk rate using TDM
ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
firmware: cs_dsp: Rename fw_ver to wmfw_ver
firmware: cs_dsp: Clarify wmfw format version log message
firmware: cs_dsp: Make wmfw and bin filename arguments const char *
...
|
||
|
Linus Torvalds
|
ebcfbf02ab |
IOMMU Updates for Linux v6.11
- Core:
* Support for the "ats-supported" device-tree property.
* Removal of the 'ops' field from 'struct iommu_fwspec'.
* Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users.
* Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem.
* Remove stale documentation.
* Add missing MODULE_DESCRIPTION() macro.
* Misc cleanups.
- Allwinner Sun50i:
* Ensure bypass mode is disabled on H616 SoCs.
* Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker.
* Add new device-tree compatible strings.
- AMD Vi:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
- Arm SMMUv2:
* Print much more useful information on context faults.
* Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n.
* Add new Qualcomm device-tree bindings.
- Arm SMMUv3:
* Support for hardware update of access/dirty bits and reporting via
IOMMUFD.
* More driver rework from Jason, this time updating the PASID/SVA support
to prepare for full IOMMUFD support.
* Add missing MODULE_DESCRIPTION() macro.
* Minor fixes and cleanups.
- NVIDIA Tegra:
* Fix for benign fwspec initialisation issue exposed by rework on the
core branch.
- Intel VT-d:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
* Use READ_ONCE() to read volatile descriptor status.
* Remove support for handling Execute-Requested requests.
* Avoid calling iommu_domain_alloc().
* Minor fixes and refactoring.
- Qualcomm MSM:
* Updates to the device-tree bindings.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmaZTqMQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNApdB/wL2gW7ANJN3KDrOiWdq06P9fuzxbuiAegI
aKGH+aT05kJjLBXpAE5K9Bas0RbgN8iIB4TITDR9jyLnMOlTP3poy0fvB8y27q00
/WkQ7yVPkZc58ySdEOGH/EbuQkiXcD1YTjTGWP9071xzbWTDbsYN0smfbvvB9LgI
56KhdcUtB0QsqhqBzyyznHJLFdpVvDpbkiAFDXJfor7SNOOtV9a4Ect6IYteaYKz
S6+DWDEfUs+fHTEKEZ9sZVA745f2zPkT/YHY8vjLOEukWN07+3/2AKTra19DIgqF
HCGitRyZjOut1fg8sLn0SUliCKe/G/bHlwSbHnxJQ73b91YDvpzD
=xvLD
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Will Deacon:
"Core:
- Support for the "ats-supported" device-tree property
- Removal of the 'ops' field from 'struct iommu_fwspec'
- Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users
- Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem
- Remove stale documentation
- Add missing MODULE_DESCRIPTION() macro
- Misc cleanups
Allwinner Sun50i:
- Ensure bypass mode is disabled on H616 SoCs
- Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker
- Add new device-tree compatible strings
AMD Vi:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
Arm SMMUv2:
- Print much more useful information on context faults
- Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n
- Add new Qualcomm device-tree bindings
Arm SMMUv3:
- Support for hardware update of access/dirty bits and reporting via
IOMMUFD
- More driver rework from Jason, this time updating the PASID/SVA
support to prepare for full IOMMUFD support
- Add missing MODULE_DESCRIPTION() macro
- Minor fixes and cleanups
NVIDIA Tegra:
- Fix for benign fwspec initialisation issue exposed by rework on the
core branch
Intel VT-d:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
- Use READ_ONCE() to read volatile descriptor status
- Remove support for handling Execute-Requested requests
- Avoid calling iommu_domain_alloc()
- Minor fixes and refactoring
Qualcomm MSM:
- Updates to the device-tree bindings"
* tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits)
iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
iommu/vt-d: Fix identity map bounds in si_domain_init()
iommu: Move IOMMU_DIRTY_NO_CLEAR define
dt-bindings: iommu: Convert msm,iommu-v0 to yaml
iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
iommu/of: Support ats-supported device-tree property
dt-bindings: PCI: generic: Add ats-supported property
iommu: Remove iommu_fwspec ops
OF: Simplify of_iommu_configure()
ACPI: Retire acpi_iommu_fwspec_ops()
iommu: Resolve fwspec ops automatically
iommu/mediatek-v1: Clean up redundant fwspec checks
RDMA/usnic: Use iommu_paging_domain_alloc()
wifi: ath11k: Use iommu_paging_domain_alloc()
wifi: ath10k: Use iommu_paging_domain_alloc()
drm/msm: Use iommu_paging_domain_alloc()
vhost-vdpa: Use iommu_paging_domain_alloc()
...
|
||
|
Linus Torvalds
|
c434e25b62 |
This update includes the following changes:
API: - Test setkey in no-SIMD context. - Add skcipher speed test for user-specified algorithm. Algorithms: - Add x25519 support on ppc64le. - Add VAES and AVX512 / AVX10 optimized AES-GCM on x86. - Remove sm2 algorithm. Drivers: - Add Allwinner H616 support to sun8i-ce. - Use DMA in stm32. - Add Exynos850 hwrng support to exynos. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmaZFsgACgkQxycdCkmx i6f76Q//ej7akY9fo6/qsn8UFK16O0SCEMkx7TrkxqHV8R6uwy4ret3+b5dbckY6 hBjDabiL/BAdNzo8hvta+BOtN6ToEqquSVwNCpX0U3YMLf9dIzcMA4Uri3LbxUHi x9Qa8klI5x62Kg+RW+ovaJC4C11oKTpjVeDn4S57MudlBnhEa3DYcEADKiUowkEz aigtLx8HrZYjwkQxwgWeS0xzeojhW1P20yaghOd6hTCD7vKw18JaKdD8r4YFGOBu 39eDaM/0vR+wWokk3NNl6NmXieBT8qLFt+OIbQs6b3gX9K37daahRs1VoShcL+ix l8GaqLpo1n1llVrV1OWzyVLVLtYK849QEo6OmlusnbK7e5pQKEOXoACQ0VB8ElNE 1u7KNW6CBWGzr33dWPgl9yYBrT3BmMXABIK4dNmTicJsK2zk2FPKbLDZNi8fWah/ D46mv7Rb8EtTdhN56EzceUJpd1ZfmP9S4vY1Hu8YdmI1pxex11US/XppKLoyymqp vNOzf85VuZ/GkUPfHdyWAFBnTaCjXtSBrlXD6+0nxavU9KGli0PLLX5tKNNWGw0l 51Z0tbNsDbo3Z+sMmtfvBXR2V8NwiAT5f775W0lLvpq/44mbDpdN3jGvfy9y9C7u 1DUC6F0XtUhZjR7e6/EhvHh3lB/a3w/m3+XC+XzDeox/VYTrC3Q= =x80X -----END PGP SIGNATURE----- Merge tag 'v6.11-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Test setkey in no-SIMD context - Add skcipher speed test for user-specified algorithm Algorithms: - Add x25519 support on ppc64le - Add VAES and AVX512 / AVX10 optimized AES-GCM on x86 - Remove sm2 algorithm Drivers: - Add Allwinner H616 support to sun8i-ce - Use DMA in stm32 - Add Exynos850 hwrng support to exynos" * tag 'v6.11-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (81 commits) hwrng: core - remove (un)register_miscdev() crypto: lib/mpi - delete unnecessary condition crypto: testmgr - generate power-of-2 lengths more often crypto: mxs-dcp - Ensure payload is zero when using key slot hwrng: Kconfig - Do not enable by default CN10K driver crypto: starfive - Fix nent assignment in rsa dec crypto: starfive - Align rsa input data to 32-bit crypto: qat - fix unintentional re-enabling of error interrupts crypto: qat - extend scope of lock in adf_cfg_add_key_value_param() Documentation: qat: fix auto_reset attribute details crypto: sun8i-ce - add Allwinner H616 support crypto: sun8i-ce - wrap accesses to descriptor address fields dt-bindings: crypto: sun8i-ce: Add compatible for H616 hwrng: core - Fix wrong quality calculation at hw rng registration hwrng: exynos - Enable Exynos850 support hwrng: exynos - Add SMC based TRNG operation hwrng: exynos - Implement bus clock control hwrng: exynos - Use devm_clk_get_enabled() to get the clock hwrng: exynos - Improve coding style dt-bindings: rng: Add Exynos850 support to exynos-trng ... |
||
Arnd Bergmann
|
1a8c67a8b2 |
arm64: qcom: don't select HAVE_PWRCTL when PCI=n
The new HAVE_PWRCTL option is defined in the PCI subsystem, so
selecting it unconditionally when PCI is disabled causes a harmless
warning:
WARNING: unmet direct dependencies detected for HAVE_PWRCTL
Depends on [n]: PCI [=n]
Selected by [y]:
- ARCH_QCOM [=y]
Add 'if PCI' in the qualcomm platform to hide the warning.
Fixes:
|
||
|
Linus Torvalds
|
70045bfc4c |
ftrace: Rewrite of function graph tracer
Up until now, the function graph tracer could only have a single user attached to it. If another user tried to attach to the function graph tracer while one was already attached, it would fail. Allowing function graph tracer to have more than one user has been asked for since 2009, but it required a rewrite to the logic to pull it off so it never happened. Until now! There's three systems that trace the return of a function. That is kretprobes, function graph tracer, and BPF. kretprobes and function graph tracing both do it similarly. The difference is that kretprobes uses a shadow stack per callback and function graph tracer creates a shadow stack for all tasks. The function graph tracer method makes it possible to trace the return of all functions. As kretprobes now needs that feature too, allowing it to use function graph tracer was needed. BPF also wants to trace the return of many probes and its method doesn't scale either. Having it use function graph tracer would improve that. By allowing function graph tracer to have multiple users allows both kretprobes and BPF to use function graph tracer in these cases. This will allow kretprobes code to be removed in the future as it's version will no longer be needed. Note, function graph tracer is only limited to 16 simultaneous users, due to shadow stack size and allocated slots. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpbWlxQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qgtvAP9jxmgEiEhz4Bpe1vRKVSMYK6ozXHTT 7MFKRMeQqQ8zeAEA2sD5Zrt9l7zKzg0DFpaDLgc3/yh14afIDxzTlIvkmQ8= =umuf -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: "Rewrite of function graph tracer to allow multiple users Up until now, the function graph tracer could only have a single user attached to it. If another user tried to attach to the function graph tracer while one was already attached, it would fail. Allowing function graph tracer to have more than one user has been asked for since 2009, but it required a rewrite to the logic to pull it off so it never happened. Until now! There's three systems that trace the return of a function. That is kretprobes, function graph tracer, and BPF. kretprobes and function graph tracing both do it similarly. The difference is that kretprobes uses a shadow stack per callback and function graph tracer creates a shadow stack for all tasks. The function graph tracer method makes it possible to trace the return of all functions. As kretprobes now needs that feature too, allowing it to use function graph tracer was needed. BPF also wants to trace the return of many probes and its method doesn't scale either. Having it use function graph tracer would improve that. By allowing function graph tracer to have multiple users allows both kretprobes and BPF to use function graph tracer in these cases. This will allow kretprobes code to be removed in the future as it's version will no longer be needed. Note, function graph tracer is only limited to 16 simultaneous users, due to shadow stack size and allocated slots" * tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (49 commits) fgraph: Use str_plural() in test_graph_storage_single() function_graph: Add READ_ONCE() when accessing fgraph_array[] ftrace: Add missing kerneldoc parameters to unregister_ftrace_direct() function_graph: Everyone uses HAVE_FUNCTION_GRAPH_RET_ADDR_PTR, remove it function_graph: Fix up ftrace_graph_ret_addr() function_graph: Make fgraph_update_pid_func() a stub for !DYNAMIC_FTRACE function_graph: Rename BYTE_NUMBER to CHAR_NUMBER in selftests fgraph: Remove some unused functions ftrace: Hide one more entry in stack trace when ftrace_pid is enabled function_graph: Do not update pid func if CONFIG_DYNAMIC_FTRACE not enabled function_graph: Make fgraph_do_direct static key static ftrace: Fix prototypes for ftrace_startup/shutdown_subops() ftrace: Assign RCU list variable with rcu_assign_ptr() ftrace: Assign ftrace_list_end to ftrace_ops_list type cast to RCU ftrace: Declare function_trace_op in header to quiet sparse warning ftrace: Add comments to ftrace_hash_move() and friends ftrace: Convert "inc" parameter to bool in ftrace_hash_rec_update_modify() ftrace: Add comments to ftrace_hash_rec_disable/enable() ftrace: Remove "filter_hash" parameter from __ftrace_hash_rec_update() ftrace: Rename dup_hash() and comment it ... |
||
Bartosz Golaszewski
|
ed70aaac7c |
Kconfig: reduce the amount of power sequencing noise
Kconfig will ask the user twice about power sequencing: once for the QCom
WCN power sequencing driver and then again for the PCI power control
driver using it.
Let's automate the selection of PCI_PWRCTL by introducing a new hidden
symbol: HAVE_PWRCTL which should be selected by all platforms that have
the need to include PCI power control code (right now: only ARCH_QCOM).
The pwrseq-based PCI pwrctl driver itself will then be selected by the
drivers binding to devices that may require external handling of the
power-up sequence (currently: ath11k and ath12k) based on the value
of HAVE_PWRCTL.
Make all PCI pwrctl Kconfig symbols hidden so that no questions are
asked during configuration.
Fixes:
|
||
|
Linus Torvalds
|
51835949dd |
Networking changes for 6.11. Not much excitement - a handful of large
patchsets (devmem among them) did not make it in time.
Core & protocols
----------------
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT.
- Use flex array for netdevice priv area, ensure its cache alignment.
- Add a sysctl knob to allow user to specify a default rto_min at socket
init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful.
- Support scheduling transmission of packets based on CLOCK_TAI.
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
using cpusets.
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
- Allow configuration of multipath hash seed, to both allow synchronizing
hashing of two routers, and preventing partial accidental sync.
- Improve TCP compliance with RFC 9293 for simultaneous connect().
- Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
IKE daemon had to do this before, but the kernel can better keep
track of it.
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
- Introduce IPPROTO_SMC for selecting SMC when socket is created.
- Allow UDP GSO transmit from devices with no checksum offload.
- openvswitch: add packet sampling via psample, separating the sampled
traffic from "upcall" packets sent to user space for forwarding.
- nf_tables: shrink memory consumption for transaction objects.
Things we sprinkled into general kernel code
--------------------------------------------
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver
for QCA6390).
- Add IRQ information in sysfs for auxiliary bus.
- Introduce guard definition for local_lock.
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures.
BPF
---
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered.
- Add new kfuncs for a generic, open-coded bits iterator.
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head.
- Support resilient split BTF which cuts down on duplication and makes
BTF as compact as possible WRT BTF from modules.
- Add support for dumping kfunc prototypes from BTF which enables both
detecting as well as dumping compilable prototypes for kfuncs.
- riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter.
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs.
Driver API
----------
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose.
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits.
- Track additional RSS contexts in the core, make sure configuration
changes don't break them.
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
data paths.
- Support updating firmware on SFP modules.
Tests and tooling
-----------------
- mptcp: use net/lib.sh to manage netns.
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints.
- openvswitch: make test self-contained (don't depend on OvS CLI tools).
Drivers
-------
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead
and skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps
to catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead of
in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=opz8
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
||
|
Linus Torvalds
|
d80f2996b8 |
asm-generic updates for 6.11
Most of this is part of my ongoing work to clean up the system call tables. In this bit, all of the newer architectures are converted to use the machine readable syscall.tbl format instead in place of complex macros in include/uapi/asm-generic/unistd.h. This follows an earlier series that fixed various API mismatches and in turn is used as the base for planned simplifications. The other two patches are dead code removal and a warning fix. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaVB1cACgkQYKtH/8kJ UicMqxAAnYKOxfjoMIhYYK6bl126wg/vIcDcjIR9cNWH21Nhn3qxn11ZXau3S7xv 3l/HreEhyEQr4gC2a70IlXyHUadYOlrk+83OURrunWk1oKPmZlMKcfPVbtp8GL7x PUNXQfwM1XZLveKwufY24hoZdwKC+Y/5WLc1t0ReznJuAqgeO2rM9W5dnV5bAfCp he3F5hFcr196Dz3/GJjJIWrY+cbwfmZWsNtj1vFTL5/r/LuCu8HTkqhsGj8tE5BJ NGVEEXbp5eaVTCIGqJWhnuZcsnKN9kM51M7CtdwWf8OTckUVuJap5OsDVKQkWkGl bLPbd2jhDltph0sah51hAIvv4WdkThW76u9FRW7KR3fo7ra67eF7l5j7wc1lE2JB GwLJ1X56Bxe1GhvvNTlDmb7DrnlP/DMPuRv3Z6xyH6l8iZ2pMGlnAxuw6Bs1s6Y5 WSs36ZpnS0ctgjfx37ZITsZSvbKFPpQFJP4siwS8aRNv/NFALNNdFyOCY5lNzspZ 0dxwjn6/7UpHE4MKh6/hvCg2QwupXXBTRytibw+75/rOsR+EYlmtuONtyq2sLUHe ktJ5pg+8XuZm27+wLffuluzmY7sv2F8OU4cTYeM60Ynmc6pRzwUY6/VhG52S1/mU Ua4VgYIpzOtlLrYmz5QTWIZpdSFSVbIc/3pLriD6hn4Mvg+BwdA= =XOhL -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "Most of this is part of my ongoing work to clean up the system call tables. In this bit, all of the newer architectures are converted to use the machine readable syscall.tbl format instead in place of complex macros in include/uapi/asm-generic/unistd.h. This follows an earlier series that fixed various API mismatches and in turn is used as the base for planned simplifications. The other two patches are dead code removal and a warning fix" * tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: vmlinux.lds.h: catch .bss..L* sections into BSS") fixmap: Remove unused set_fixmap_offset_io() riscv: convert to generic syscall table openrisc: convert to generic syscall table nios2: convert to generic syscall table loongarch: convert to generic syscall table hexagon: use new system call table csky: convert to generic syscall table arm64: rework compat syscall macros arm64: generate 64-bit syscall.tbl arm64: convert unistd_32.h to syscall.tbl format arc: convert to generic syscall table clone3: drop __ARCH_WANT_SYS_CLONE3 macro kbuild: add syscall table generation to scripts/Makefile.asm-headers kbuild: verify asm-generic header list loongarch: avoid generating extra header files um: don't generate asm/bpf_perf_event.h csky: drop asm/gpio.h wrapper syscalls: add generic scripts/syscall.tbl |
||
|
Linus Torvalds
|
a5db8e4544 |
soc: arm platform updates for 6.11
The majority of the updates here are Dmitry Torokhov's cleanups for platform code in the pxa and tegra platforms, changing custom platform_data structures into DT-compatible software node declarations. The other updates are for the MAINTAINERS file, correcting some stale or missing entries. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaVNvgACgkQYKtH/8kJ UiddAQ//QIfU7YJbB+nLLHURWDZsFqzmdwX9Shwb810TecwkYyeltbjkwYQw6/VD Pc1C5t08Brnjwgm9Z4jU8dKDeS4znMy1MzjyGoZqYLamNojhChXG4fonhGVYncg4 m3ruXgXZ/xsmqfMloclCtOSB6DWjXk9tVyUDNymXWgATmlwVsZl6saXf5nEo11bu WKi6kHhfM1s/JKGBaScd/GnxmXpBco4T7ub8cBZ/6Kn5RS6OodSb1ZCiTTI3KHdT oLzQ+B+MjAF5jlWvrqFuKrosjHB0RiKa/GKlfwsM4ho91Rfm979wsykEacR+iOy6 usbAdfV/AgKT0C6Hd471Kdtpt0mV5lcc4QdwQTAycslHI4CzjRmQW+yHWUJxxOEB ggEtzKimpVbInN4ygJTnA8dZIawZ/CdCZQ04hQtyEuZamx3MGYVPaNIowNq4CRlv r6NRgfvQVGeQfpJCOdUySwwxVXDsq+Q8dUvswf6qfDDRyHiAtNqnoNd/G4rsI9Uy ItsGaFHpaVi1ElAO7IyEb9JzQGRIwxryseET5cUyfhJEM5RFk4aBMYJVFtDgV4H5 KldgfIWpUZyMlM6IxdWziBDvKyrToAXb9NSX7nlcP2879IztNIwW2V+7y4rdX7Mu fTjLZxkypLdJkKvdcXNwS4toZ+CvpzcjeEJlGcPcVc1JY/Ua3Ck= =/EgX -----END PGP SIGNATURE----- Merge tag 'soc-arm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull arm SoC platform updates from Arnd Bergmann: "The majority of the updates here are Dmitry Torokhov's cleanups for platform code in the pxa and tegra platforms, changing custom platform_data structures into DT-compatible software node declarations. The other updates are for the MAINTAINERS file, correcting some stale or missing entries" * tag 'soc-arm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: pxa: fix build breakage on PXA3xx ti: omap: MAINTAINERS: move Benoît Cousson to CREDITS amazon: MAINTAINERS: change to odd fixes and Tsahee Zidenberg to CREDITS MAINTAINERS: thead: add git tree ARM: spitz: Use software nodes for the ADS7846 touchscreen ARM: spitz: Use software nodes to describe LED GPIOs ARM: spitz: Use software nodes to describe MMC GPIOs ARM: spitz: Use software nodes to describe LCD GPIOs ARM: spitz: Use software nodes to describe audio GPIOs ARM: spitz: Use software nodes to describe SPI CS lines ARM: spitz: Simplify instantiating SPI controller ARM: pxa/gumstix: convert vbus gpio to use software nodes ARM: pxa: consolidate GPIO chip platform data ARM: spitz: fix GPIO assignment for backlight ARM: tegra: paz00: Use software nodes to describe GPIOs for WiFi rfkill MAINTAINERS: ARM: airoha: add entry to cover Airoha SoC bus: vexpress-config: Add missing MODULE_DESCRIPTION() macro arm64: layerscape: remove redundant EDAC_SUPPORT selection dt-bindings: arm: Remove obsolete RTSM DCSCB binding arm: vexpress: Remove obsolete RTSM DCSCB support |
||
|
Linus Torvalds
|
a9a4cd9c33 |
soc: defconfig updates for 6.11
These are the usual updates to enable newly added drivers, mostly for arm64 and riscv this time. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaVOFUACgkQYKtH/8kJ Uiecqw/+LleDzQp7Gf2DaQUesmLwfqs6xj69GIDI69y1PLPI0bQK/hSQ3B+ZTpZP fF56oxBbevytgf6LzhI/Ma+RLcSWqyNw6wgzkS+pBnslCC/8zc66wU7WF53CL9LL Ovxo0MRKzQdCgXpu1OZFeUM38YT72yKNebjiYE502vHHfm3Q7XmGmPgCgIJqF0rE BSQaSCPLEJU/pFsus+gAILKn+ptgt8GUWDKRSGksJZ8oyuWB30fl+GZ4yg6TaFie /D3gm3Qh9uXviG7w4ks1gTvuOgoTlRAecrzxstPrQvHDaG2WCdmvI68aek7Dj/DH AYb6krExF58VBdTK+HhD9hxxF9nLvk58GVNfTd7FryIejv9Nw0sMWC7SGoYkZShF bSkuX2cxy6S0+ejvJ+HOkmLFAXY2D3ScuVpIEaoE3V+R017Izq5vyYWdvZv2CyMv zv9wZW6oiDMDRyVbnrw2dZ4JQwna3XWf3ffr8Ds6NNJt4e07npPlkmlwsUfZEkMl yQAtUBeeGBDT3GKP2ZyaexHbIwXro6EcICa1hupyLZwR3RSiU7ZsNL98lKW9nTkJ 2ZK5f9vKAat+yFZ+XfZS+khA2qz2gtrykonHYZvXcV7FcM8UmpvlO22gliwRR4VI JOwu+biwM6hnGoJc7WyC5YS2rwcOZZ1JIv6vvUDznOZ3pLKFb7E= =OqPR -----END PGP SIGNATURE----- Merge tag 'soc-defconfig-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC defconfig updates from Arnd Bergmann: "These are the usual updates to enable newly added drivers, mostly for arm64 and riscv this time" * tag 'soc-defconfig-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: defconfig: Enable the IWLWIFI driver ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support arm64: defconfig: Enable NVIDIA CoreSight PMU driver arm64: defconfig: enable SHM Bridge support for the TZ memory allocator arm64: defconfig: Enable secure QFPROM driver ARM: imx_v6_v7_defconfig: enable DRM_SII902X and DRM_DISPLAY_CONNECTOR ARM: imx_v6_v7_defconfig: Enable drivers for TQMa7x/MBa7x riscv: defconfig: Enable StarFive JH7110 drivers arm64: defconfig: Enable TI LP873X PMIC arm64: defconfig: Enable USB2 PHY Driver arm64: defconfig: Enable MTD support for Hyperbus ARM: configs: at91: Enable LVDS serializer support arm64: defconfig: enable several Qualcomm interconnects arm64: defconfig: Enable Marvell 88Q2XXX PHY support arm64: defconfig: make CONFIG_INTERCONNECT_QCOM_SM8350 built-in arm64: defconfig: enable CONFIG_SM_GPUCC_8350 arm64: defconfig: Enable Renesas R-Car Gen4 PCIe controller |
||
|
Linus Torvalds
|
e3950967f6 |
soc: dt updates for 6.11
The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to
the MT7981 Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv
boards and eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops
based on the Qualcomm x1e80100 (Snapdragon X1 Elite) chip,
the Asus Vivobook S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices
from Samsung, Motorola and LG, as well as a wireless router
and some reference designs
- Six NXP i.MX based machines, mostly industrial boards along
with some reference designs
- Mediatek sees some interesting Filogic based routers
including the "OpenWRT One", a few new Chromebooks as
well as single-board computers.
- Four machines from Solidrun based on Marvell cn913x,
replacing the older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board
computers including some interesting ones based on the
rk3588 chip like the ROCK 5 ITX board and the CM3588
with its four NVMe slots
- The RISC-V boards are all single-board computers based on
Starfive JH7110, Microchip MPFS and Allwinner D1, which all
had similar boards already
There are also a lot of updates to already supported machines,
notably for the TI K3, Rockchips, Freescale and of course
Qualcomm platforms.
-----BEGIN PGP SIGNATURE-----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=xGqj
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to the MT7981
Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv boards and
eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops based on
the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices from
Samsung, Motorola and LG, as well as a wireless router and some
reference designs
- Six NXP i.MX based machines, mostly industrial boards along with
some reference designs
- Mediatek sees some interesting Filogic based routers including the
"OpenWRT One", a few new Chromebooks as well as single-board
computers.
- Four machines from Solidrun based on Marvell cn913x, replacing the
older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board computers
including some interesting ones based on the rk3588 chip like the
ROCK 5 ITX board and the CM3588 with its four NVMe slots
- The RISC-V boards are all single-board computers based on Starfive
JH7110, Microchip MPFS and Allwinner D1, which all had similar
boards already
There are also a lot of updates to already supported machines, notably
for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"
* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
arm64: dts: allwinner: h616: add crypto engine node
riscv: dts: add clock generator for Sophgo SG2042 SoC
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
mailmap: Update Luca Weiss's email address
ARM: dts: ixp4xx: nslu2: beeper uses PWM
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
ARM: dts: qcom: msm8960: correct memory base
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
...
|
||
|
Linus Torvalds
|
cc0f7c3f97 |
soc: driver updates for 6.11
The updates to the mediatek, allwinner, ti, tegra, microchip, stm32, samsung, imx, zynq and amlogic platoforms are farily small maintenance changes, either addressing minor mistakes or enabling additional hardware. The qualcomm platform changes add a number of features and are larger than the other ones combined, introducing the use of linux/cleanup.h across several drivers, adding support for Snapdragon X1E and other SoCs in platform drivers, a new "protection domain mapper" driver, and a "shared memory bridge" driver. The cznic "turris omnia" router based on Marvell Armada gets a platform driver that talks to the board specific microcontroller. The reset and cache subsystems get a few minor updates to SoC specific drivers, while the ff-a, scmi and optee firmware drivers get some code refactoring and new features. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaVTTUACgkQYKtH/8kJ UiegixAAqGfwUtwk2GGZJlEGjUjT4cqrwCTLhNlaNfgN/dZxjk1XBTKvtp2mVDi2 lJN8TNqa0Csw8XZYPgHi0s1ppmwQl07Unpbc9tUeS4tAeIuputDe+ia0UtQx3Mkd GTAKJO6VzLeCnDxB4757OURZO9wYlPdZycQbnSKDyfBIapFuZwozmbAc7BuFGvBv 2Zt5lca531EJuM5wg25f+F/8XSxZIqjMA6/PTGNCYig1bx5AM2tCWK2xN+BL+dxn YVLuRZT7lSgpwivg9OHzJ49g9WeJB7RArnSDg1Ac7sNfC8476UC17BAH4rF7QSTP q2GBP2VOdRJA9mJkavtLhE/1LPDJuYTM+nt1xq7jzG2MKN7yLjX0LMrMgKsk0pXZ T2qQh7+4MA9lwlpGEwDruMajTJahbMgiAUcSivLsr18LrifAnKVHBDTRmRwNiRX2 T3/zk90kenJX1NOkc4SrdLd5iCyq0oSN+fukdh3UMgJLnAzaWOe5mKAMF7eefeog rMH276W8JwbbmIC4R2aQm6TL7IWBtaCaHuLqYOiTjooir31OgwW4Mztd7okU4v4I rOGhV0zJTSVXT+a4O2jOooWppS9xE45/F2DSigSvZjEiahZ0L4feaOrHui5PVVlW wmFmobCq6Y0Mjspdk64O1tbUWJ17CmRK1WDrUUk0VgmLy9gn6A8= =ChcR -----END PGP SIGNATURE----- Merge tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "The updates to the mediatek, allwinner, ti, tegra, microchip, stm32, samsung, imx, zynq and amlogic platoforms are fairly small maintenance changes, either addressing minor mistakes or enabling additional hardware. The qualcomm platform changes add a number of features and are larger than the other ones combined, introducing the use of linux/cleanup.h across several drivers, adding support for Snapdragon X1E and other SoCs in platform drivers, a new "protection domain mapper" driver, and a "shared memory bridge" driver. The cznic "turris omnia" router based on Marvell Armada gets a platform driver that talks to the board specific microcontroller. The reset and cache subsystems get a few minor updates to SoC specific drivers, while the ff-a, scmi and optee firmware drivers get some code refactoring and new features" * tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits) firmware: turris-mox-rwtm: Initialize completion before mailbox firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout() firmware: turris-mox-rwtm: Do not complete if there are no waiters MAINTAINERS: drop riscv list from cache controllers platform: cznic: turris-omnia-mcu: fix Kconfig dependencies bus: sunxi-rsb: Constify struct regmap_bus soc: sunxi: sram: Constify struct regmap_config platform: cznic: turris-omnia-mcu: Depend on WATCHDOG platform: cznic: turris-omnia-mcu: Depend on OF soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers arm64: stm32: enable scmi regulator for stm32 firmware: qcom: tzmem: blacklist more platforms for SHM Bridge soc: qcom: wcnss: simplify with cleanup.h soc: qcom: pdr: simplify with cleanup.h soc: qcom: ocmem: simplify with cleanup.h soc: qcom: mdt_loader: simplify with cleanup.h soc: qcom: llcc: simplify with cleanup.h firmware: qcom: tzmem: simplify returning pointer without cleanup soc: qcom: socinfo: Add PM6350 PMIC arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS ... |
||
Paolo Bonzini
|
86014c1e20 |
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
-----BEGIN PGP SIGNATURE-----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=BalU
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
|
||
|
Paolo Bonzini
|
1c5a0b55ab |
KVM/arm64 changes for 6.11
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of
the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZpTCAxccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFjChAQCWs9ucJag4USgvXpg5mo9sxzly
kBZZ1o49N/VLxs4cagEAtq3KVNQNQyGXelYH6gr20aI85j6VnZW5W5z+sy5TAgk=
=sSOt
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.11
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of
the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
|
||
|
Linus Torvalds
|
c89d780cc1 |
arm64 updates for 6.11:
* Virtual CPU hotplug support for arm64 ACPI systems
* cpufeature infrastructure cleanups and making the FEAT_ECBHB ID bits
visible to guests
* CPU errata: expand the speculative SSBS workaround to more CPUs
* arm64 ACPI:
- acpi=nospcr option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
* GICv3, use compile-time PMR values: optimise the way regular IRQs are
masked/unmasked when GICv3 pseudo-NMIs are used, removing the need for
a static key in fast paths by using a priority value chosen
dynamically at boot time
* arm64 perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
* arm64 kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
* arm64 Documentation update with a minor clarification on TBI
* Miscellaneous:
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos
-----BEGIN PGP SIGNATURE-----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=ob2k
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
|
||
|
Linus Torvalds
|
1654c37ddb |
Merge branch 'arm64-uaccess' (early part)
Merge arm64 support for proper 'unsafe' user accessor functionality, with 'asm goto' for handling exceptions. The arm64 user access code used the slow fallback code for the user access code, which generates horrendous code for things like strncpy_from_user(), because it causes us to generate code for SW PAN and for range checking for every individual word. Teach arm64 about 'user_access_begin()' and the so-called 'unsafe' user access functions that take an error label and use 'asm goto' to make all the exception handling be entirely out of line. [ These user access functions are called 'unsafe' not because the concept is unsafe, but because the low-level accessor functions absolutely have to be protected by the 'user_access_begin()' code, because that's what does the range checking. So the accessor functions have that scary name to make sure people don't think they are usable on their own, and cannot be mis-used the way our old "double underscore" versions of __get_user() and friends were ] The "(early part)" of the branch is because the full branch also improved on the "access_ok()" function, but the exact semantics of TBI (top byte ignore) have to be discussed before doing that part. So this just does the low-level accessor update to use "asm goto". * 'arm64-uaccess' (early part): arm64: start using 'asm goto' for put_user() arm64: start using 'asm goto' for get_user() when available |
||
|
Masahiro Yamada
|
b9d73218d7 |
treewide: change conditional prompt for choices to 'depends on'
While Documentation/kbuild/kconfig-language.rst provides a brief
explanation, there are recurring confusions regarding the usage of a
prompt followed by 'if <expr>'. This conditional controls _only_ the
prompt.
A typical usage is as follows:
menuconfig BLOCK
bool "Enable the block layer" if EXPERT
default y
When EXPERT=n, the prompt is hidden, but this config entry is still
active, and BLOCK is set to its default value 'y'. This is reasonable
because you are likely want to enable the block device support. When
EXPERT=y, the prompt is shown, allowing you to toggle BLOCK.
Please note that it is different from 'depends on EXPERT', which would
enable and disable the entire config entry.
However, this conditional prompt has never worked in a choice block.
The following two work in the same way: when EXPERT is disabled, the
choice block is entirely disabled.
[Test Code 1]
choice
prompt "choose" if EXPERT
config A
bool "A"
config B
bool "B"
endchoice
[Test Code 2]
choice
prompt "choose"
depends on EXPERT
config A
bool "A"
config B
bool "B"
endchoice
I believe the first case should hide only the prompt, producing the
default:
CONFIG_A=y
# CONFIG_B is not set
The next commit will change (fix) the behavior of the conditional prompt
in choice blocks.
I see several choice blocks wrongly using a conditional prompt, where
'depends on' makes more sense.
To preserve the current behavior, this commit converts such misuses.
I did not touch the following entry in arch/x86/Kconfig:
choice
prompt "Memory split" if EXPERT
default VMSPLIT_3G
This is truly the correct use of the conditional prompt; when EXPERT=n,
this choice block should silently select the reasonable VMSPLIT_3G,
although the resulting PAGE_OFFSET will not be affected anyway.
Presumably, the one in fs/jffs2/Kconfig is also correct, but I converted
it to 'depends on' to avoid any potential behavioral change.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
||
|
Linus Torvalds
|
6a31ffdfed |
Merge branch 'word-at-a-time'
Merge minor word-at-a-time instruction choice improvements for x86 and arm64. This is the second of four branches that came out of me looking at the code generation for path lookup on arm64. The word-at-a-time infrastructure is used to do string operations in chunks of one word both when copying the pathname from user space (in strncpy_from_user()), and when parsing and hashing the individual path components (in link_path_walk()). In particular, the "find the first zero byte" uses various bit tricks to figure out the end of the string or path component, and get the length without having to do things one byte at a time. Both x86-64 and arm64 had less than optimal code choices for that. The commit message for the arm64 change in particular tries to explain the exact code flow for the zero byte finding for people who care. It's made a bit more complicated by the fact that we support big-endian hardware too, and so we have some extra abstraction layers to allow different models for finding the zero byte, quite apart from the issue of picking specialized instructions. * word-at-a-time: arm64: word-at-a-time: improve byte count calculations for LE x86-64: word-at-a-time: improve byte count calculations |
||
|
Linus Torvalds
|
a5819099f6 |
Merge branch 'runtime-constants'
Merge runtime constants infrastructure with implementations for x86 and
arm64.
This is one of four branches that came out of me looking at profiles of
my kernel build filesystem load on my 128-core Altra arm64 system, where
pathname walking and the user copies (particularly strncpy_from_user()
for fetching the pathname from user space) is very hot.
This is a very specialized "instruction alternatives" model where the
dentry hash pointer and hash count will be constants for the lifetime of
the kernel, but the allocation are not static but done early during the
kernel boot. In order to avoid the pointer load and dynamic shift, we
just rewrite the constants in the instructions in place.
We can't use the "generic" alternative instructions infrastructure,
because different architectures do it very differently, and it's
actually simpler to just have very specific helpers, with a fallback to
the generic ("old") model of just using variables for architectures that
do not implement the runtime constant patching infrastructure.
Link: https://lore.kernel.org/all/CAHk-=widPe38fUNjUOmX11ByDckaeEo9tN4Eiyke9u1SAtu9sA@mail.gmail.com/
* runtime-constants:
arm64: add 'runtime constant' support
runtime constants: add x86 architecture support
runtime constants: add default dummy infrastructure
vfs: dcache: move hashlen_hash() from callers into d_hash()
|
||
Oliver Upton
|
bc2e3253ca |
Merge branch kvm-arm64/nv-tcr2 into kvmarm/next
* kvm-arm64/nv-tcr2:
: Fixes to the handling of TCR_EL1, courtesy of Marc Zyngier
:
: Series addresses a couple gaps that are present in KVM (from cover
: letter):
:
: - VM configuration: HCRX_EL2.TCR2En is forced to 1, and we blindly
: save/restore stuff.
:
: - trap bit description and routing: none, obviously, since we make a
: point in not trapping.
KVM: arm64: Honor trap routing for TCR2_EL1
KVM: arm64: Make PIR{,E0}_EL1 save/restore conditional on FEAT_TCRX
KVM: arm64: Make TCR2_EL1 save/restore dependent on the VM features
KVM: arm64: Get rid of HCRX_GUEST_FLAGS
KVM: arm64: Correctly honor the presence of FEAT_TCRX
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
||
|
Oliver Upton
|
8c2899e770 |
Merge branch kvm-arm64/nv-sve into kvmarm/next
* kvm-arm64/nv-sve: : CPTR_EL2, FPSIMD/SVE support for nested : : This series brings support for honoring the guest hypervisor's CPTR_EL2 : trap configuration when running a nested guest, along with support for : FPSIMD/SVE usage at L1 and L2. KVM: arm64: Allow the use of SVE+NV KVM: arm64: nv: Add additional trap setup for CPTR_EL2 KVM: arm64: nv: Add trap description for CPTR_EL2 KVM: arm64: nv: Add TCPAC/TTA to CPTR->CPACR conversion helper KVM: arm64: nv: Honor guest hypervisor's FP/SVE traps in CPTR_EL2 KVM: arm64: nv: Load guest FP state for ZCR_EL2 trap KVM: arm64: nv: Handle CPACR_EL1 traps KVM: arm64: Spin off helper for programming CPTR traps KVM: arm64: nv: Ensure correct VL is loaded before saving SVE state KVM: arm64: nv: Use guest hypervisor's max VL when running nested guest KVM: arm64: nv: Save guest's ZCR_EL2 when in hyp context KVM: arm64: nv: Load guest hyp's ZCR into EL1 state KVM: arm64: nv: Handle ZCR_EL2 traps KVM: arm64: nv: Forward SVE traps to guest hypervisor KVM: arm64: nv: Forward FP/ASIMD traps to guest hypervisor Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
|
Oliver Upton
|
1270dad310 |
Merge branch kvm-arm64/el2-kcfi into kvmarm/next
* kvm-arm64/el2-kcfi: : kCFI support in the EL2 hypervisor, courtesy of Pierre-Clément Tosi : : Enable the usage fo CONFIG_CFI_CLANG (kCFI) for hardening indirect : branches in the EL2 hypervisor. Unlike kernel support for the feature, : CFI failures at EL2 are always fatal. KVM: arm64: nVHE: Support CONFIG_CFI_CLANG at EL2 KVM: arm64: Introduce print_nvhe_hyp_panic helper arm64: Introduce esr_brk_comment, esr_is_cfi_brk KVM: arm64: VHE: Mark __hyp_call_panic __noreturn KVM: arm64: nVHE: gen-hyprel: Skip R_AARCH64_ABS32 KVM: arm64: nVHE: Simplify invalid_host_el2_vect KVM: arm64: Fix __pkvm_init_switch_pgd call ABI KVM: arm64: Fix clobbered ELR in sync abort/SError Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
|
Oliver Upton
|
377d0e5d77 |
Merge branch kvm-arm64/ctr-el0 into kvmarm/next
* kvm-arm64/ctr-el0: : Support for user changes to CTR_EL0, courtesy of Sebastian Ott : : Allow userspace to change the guest-visible value of CTR_EL0 for a VM, : so long as the requested value represents a subset of features supported : by hardware. In other words, prevent the VMM from over-promising the : capabilities of hardware. : : Make this happen by fitting CTR_EL0 into the existing infrastructure for : feature ID registers. KVM: selftests: Assert that MPIDR_EL1 is unchanged across vCPU reset KVM: arm64: nv: Unfudge ID_AA64PFR0_EL1 masking KVM: selftests: arm64: Test writes to CTR_EL0 KVM: arm64: rename functions for invariant sys regs KVM: arm64: show writable masks for feature registers KVM: arm64: Treat CTR_EL0 as a VM feature ID register KVM: arm64: unify code to prepare traps KVM: arm64: nv: Use accessors for modifying ID registers KVM: arm64: Add helper for writing ID regs KVM: arm64: Use read-only helper for reading VM ID registers KVM: arm64: Make idregs debugfs iterator search sysreg table directly KVM: arm64: Get sys_reg encoding from descriptor in idregs_debug_show() Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
|
Oliver Upton
|
435a9f60ed |
Merge branch kvm-arm64/shadow-mmu into kvmarm/next
* kvm-arm64/shadow-mmu:
: Shadow stage-2 MMU support for NV, courtesy of Marc Zyngier
:
: Initial implementation of shadow stage-2 page tables to support a guest
: hypervisor. In the author's words:
:
: So here's the 10000m (approximately 30000ft for those of you stuck
: with the wrong units) view of what this is doing:
:
: - for each {VMID,VTTBR,VTCR} tuple the guest uses, we use a
: separate shadow s2_mmu context. This context has its own "real"
: VMID and a set of page tables that are the combination of the
: guest's S2 and the host S2, built dynamically one fault at a time.
:
: - these shadow S2 contexts are ephemeral, and behave exactly as
: TLBs. For all intent and purposes, they *are* TLBs, and we discard
: them pretty often.
:
: - TLB invalidation takes three possible paths:
:
: * either this is an EL2 S1 invalidation, and we directly emulate
: it as early as possible
:
: * or this is an EL1 S1 invalidation, and we need to apply it to
: the shadow S2s (plural!) that match the VMID set by the L1 guest
:
: * or finally, this is affecting S2, and we need to teardown the
: corresponding part of the shadow S2s, which invalidates the TLBs
KVM: arm64: nv: Truely enable nXS TLBI operations
KVM: arm64: nv: Add handling of NXS-flavoured TLBI operations
KVM: arm64: nv: Add handling of range-based TLBI operations
KVM: arm64: nv: Add handling of outer-shareable TLBI operations
KVM: arm64: nv: Invalidate TLBs based on shadow S2 TTL-like information
KVM: arm64: nv: Tag shadow S2 entries with guest's leaf S2 level
KVM: arm64: nv: Handle FEAT_TTL hinted TLB operations
KVM: arm64: nv: Handle TLBI IPAS2E1{,IS} operations
KVM: arm64: nv: Handle TLBI ALLE1{,IS} operations
KVM: arm64: nv: Handle TLBI VMALLS12E1{,IS} operations
KVM: arm64: nv: Handle TLB invalidation targeting L2 stage-1
KVM: arm64: nv: Handle EL2 Stage-1 TLB invalidation
KVM: arm64: nv: Add Stage-1 EL2 invalidation primitives
KVM: arm64: nv: Unmap/flush shadow stage 2 page tables
KVM: arm64: nv: Handle shadow stage 2 page faults
KVM: arm64: nv: Implement nested Stage-2 page table walk logic
KVM: arm64: nv: Support multiple nested Stage-2 mmu structures
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
||
|
Oliver Upton
|
a35d5b2032 |
Merge branch kvm-arm64/ffa-1p1 into kvmarm/next
* kvm-arm64/ffa-1p1: : Improvements to the pKVM FF-A Proxy, courtesy of Sebastian Ene : : Various minor improvements to how host FF-A calls are proxied with the : TEE, along with support for v1.1 of the protocol. KVM: arm64: Use FF-A 1.1 with pKVM KVM: arm64: Update the identification range for the FF-A smcs KVM: arm64: Add support for FFA_PARTITION_INFO_GET KVM: arm64: Trap FFA_VERSION host call in pKVM Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
Jakub Kicinski
|
26f453176a |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZpGVmAAKCRDbK58LschI gxB4AQCgquQis63yqTI36j4iXBT+TuxHEBNoQBSLyzYdrLS1dgD/S5DRJDA+3LD+ 394hn/VtB1qvX5vaqjsov4UIwSMyxA0= =OhSn -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-07-12 We've added 23 non-merge commits during the last 3 day(s) which contain a total of 18 files changed, 234 insertions(+), 243 deletions(-). The main changes are: 1) Improve BPF verifier by utilizing overflow.h helpers to check for overflows, from Shung-Hsi Yu. 2) Fix NULL pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT when attr->attach_prog_fd was not specified, from Tengda Wu. 3) Fix arm64 BPF JIT when generating code for BPF trampolines with BPF_TRAMP_F_CALL_ORIG which corrupted upper address bits, from Puranjay Mohan. 4) Remove test_run callback from lwt_seg6local_prog_ops which never worked in the first place and caused syzbot reports, from Sebastian Andrzej Siewior. 5) Relax BPF verifier to accept non-zero offset on KF_TRUSTED_ARGS/ /KF_RCU-typed BPF kfuncs, from Matt Bobrowski. 6) Fix a long standing bug in libbpf with regards to handling of BPF skeleton's forward and backward compatibility, from Andrii Nakryiko. 7) Annotate btf_{seq,snprintf}_show functions with __printf, from Alan Maguire. 8) BPF selftest improvements to reuse common network helpers in sk_lookup test and dropping the open-coded inetaddr_len() and make_socket() ones, from Geliang Tang. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits) selftests/bpf: Test for null-pointer-deref bugfix in resolve_prog_type() bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT selftests/bpf: DENYLIST.aarch64: Skip fexit_sleep again bpf: use check_sub_overflow() to check for subtraction overflows bpf: use check_add_overflow() to check for addition overflows bpf: fix overflow check in adjust_jmp_off() bpf: Eliminate remaining "make W=1" warnings in kernel/bpf/btf.o bpf: annotate BTF show functions with __printf bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG selftests/bpf: Close obj in error path in xdp_adjust_tail selftests/bpf: Null checks for links in bpf_tcp_ca selftests/bpf: Use connect_fd_to_fd in sk_lookup selftests/bpf: Use start_server_addr in sk_lookup selftests/bpf: Use start_server_str in sk_lookup selftests/bpf: Close fd in error path in drop_on_reuseport selftests/bpf: Add ASSERT_OK_FD macro selftests/bpf: Add backlog for network_helper_opts selftests/bpf: fix compilation failure when CONFIG_NF_FLOW_TABLE=m bpf: Remove tst_run from lwt_seg6local_prog_ops. bpf: relax zero fixed offset constraint on KF_TRUSTED_ARGS/KF_RCU ... ==================== Link: https://patch.msgid.link/20240712212448.5378-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
e5abd12f3d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c |
||
Christophe Leroy
|
e6c0c03245 |
mm: provide mm_struct and address to huge_ptep_get()
On powerpc 8xx huge_ptep_get() will need to know whether the given ptep is a PTE entry or a PMD entry. This cannot be known with the PMD entry itself because there is no easy way to know it from the content of the entry. So huge_ptep_get() will need to know either the size of the page or get the pmd. In order to be consistent with huge_ptep_get_and_clear(), give mm and address to huge_ptep_get(). Link: https://lkml.kernel.org/r/cc00c70dd384298796a4e1b25d6c4eb306d3af85.1719928057.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Catalin Marinas
|
4f3a6c4de7 |
Merge branch 'for-next/vcpu-hotplug' into for-next/core
* for-next/vcpu-hotplug: (21 commits) : arm64 support for virtual CPU hotplug (ACPI) irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU cpumask: Add enabled cpumask for present CPUs that can be brought online arm64: document virtual CPU hotplug's expectations arm64: Kconfig: Enable hotplug CPU on arm64 if ACPI_PROCESSOR is enabled. arm64: arch_register_cpu() variant to check if an ACPI handle is now available. arm64: psci: Ignore DENIED CPUs irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' CPUs irqchip/gic-v3: Don't return errors from gic_acpi_match_gicc() arm64: acpi: Harden get_cpu_for_acpi_id() against missing CPU entry arm64: acpi: Move get_cpu_for_acpi_id() to a header ACPI: Add post_eject to struct acpi_scan_handler for cpu hotplug ACPI: scan: switch to flags for acpi_scan_check_and_detach() ACPI: processor: Register deferred CPUs from acpi_processor_get_info() ACPI: processor: Add acpi_get_processor_handle() helper ACPI: processor: Move checks and availability of acpi_processor earlier ACPI: processor: Fix memory leaks in error paths of processor_add() ACPI: processor: Return an error if acpi_processor_get_info() fails in processor_add() ACPI: processor: Drop duplicated check on _STA (enabled + present) cpu: Do not warn on arch_register_cpu() returning -EPROBE_DEFER ... |
||
|
Catalin Marinas
|
3346c56685 |
Merge branches 'for-next/cpufeature', 'for-next/misc', 'for-next/kselftest', 'for-next/mte', 'for-next/errata', 'for-next/acpi', 'for-next/gic-v3-pmr' and 'for-next/doc', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf: perf: add missing MODULE_DESCRIPTION() macros perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h perf: arm_v6/7_pmu: Drop non-DT probe support perf/arm: Move 32-bit PMU drivers to drivers/perf/ perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold perf: imx_perf: add support for i.MX95 platform perf: imx_perf: fix counter start and config sequence perf: imx_perf: refactor driver for imx93 perf: imx_perf: let the driver manage the counter usage rather the user perf: imx_perf: add macro definitions for parsing config attr dt-bindings: perf: fsl-imx-ddr: Add i.MX95 compatible perf: pmuv3: Add new Cortex and Neoverse PMUs dt-bindings: arm: pmu: Add new Cortex and Neoverse cores perf/arm-cmn: Enable support for tertiary match group perf/arm-cmn: Decouple wp_config registers from filter group number * for-next/cpufeature: : Various cpufeature infrastructure patches arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1 KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1 arm64/cpufeatures/kvm: Add ARMv8.9 FEAT_ECBHB bits in ID_AA64MMFR1 register * for-next/misc: : Miscellaneous patches arm64: smp: Fix missing IPI statistics arm64: Cleanup __cpu_set_tcr_t0sz() arm64/mm: Stop using ESR_ELx_FSC_TYPE during fault arm64: Kconfig: fix typo in __builtin_return_adddress ARM64: reloc_test: add missing MODULE_DESCRIPTION() macro arm64: implement raw_smp_processor_id() using thread_info arm64/arch_timer: include <linux/percpu.h> * for-next/kselftest: : arm64 kselftest updates selftests: arm64: tags: remove the result script selftests: arm64: tags_test: conform test to TAP output kselftest/arm64: Fix a couple of spelling mistakes kselftest/arm64: Fix redundancy of a testcase kselftest/arm64: Include kernel mode NEON in fp-stress * for-next/mte: : MTE updates arm64: mte: Make mte_check_tfsr_*() conditional on KASAN instead of MTE * for-next/errata: : Arm CPU errata workarounds arm64: errata: Expand speculative SSBS workaround arm64: errata: Unify speculative SSBS errata logic arm64: cputype: Add Cortex-X925 definitions arm64: cputype: Add Cortex-A720 definitions arm64: cputype: Add Cortex-X3 definitions * for-next/acpi: : arm64 ACPI patches ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64 ACPI / amba: Drop unnecessary check for registered amba_dummy_clk arm64: FFH: Move ACPI specific code into drivers/acpi/arm64/ arm64: cpuidle: Move ACPI specific code into drivers/acpi/arm64/ ACPI: arm64: Sort entries alphabetically * for-next/gic-v3-pmr: : arm64: irqchip/gic-v3: Use compiletime constant PMR values arm64: irqchip/gic-v3: Select priorities at boot time irqchip/gic-v3: Detect GICD_CTRL.DS and SCR_EL3.FIQ earlier irqchip/gic-v3: Make distributor priorities variables irqchip/gic-common: Remove sync_access callback wordpart.h: Add REPEAT_BYTE_U32() * for-next/doc: : arm64 documentation updates Documentation: arm64: Update memory.rst for TBI |
||
Puranjay Mohan
|
19d3c179a3 |
bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG
When BPF_TRAMP_F_CALL_ORIG is set, the trampoline calls
__bpf_tramp_enter() and __bpf_tramp_exit() functions, passing them
the struct bpf_tramp_image *im pointer as an argument in R0.
The trampoline generation code uses emit_addr_mov_i64() to emit
instructions for moving the bpf_tramp_image address into R0, but
emit_addr_mov_i64() assumes the address to be in the vmalloc() space
and uses only 48 bits. Because bpf_tramp_image is allocated using
kzalloc(), its address can use more than 48-bits, in this case the
trampoline will pass an invalid address to __bpf_tramp_enter/exit()
causing a kernel crash.
Fix this by using emit_a64_mov_i64() in place of emit_addr_mov_i64()
as it can work with addresses that are greater than 48-bits.
Fixes:
|
||
|
Arnd Bergmann
|
48d2245586 |
Allwinner SoC device tree changes for 6.11 part 2
One additional peripheral enabled for the H616. - H616 crypto engine added -----BEGIN PGP SIGNATURE----- iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAmaOvwcOHHdlbnNAY3Np ZS5vcmcACgkQOJpUIZwPJDCRuxAApCCnXFDAo5Itnkbq0dJLx9apL8spyjsIIys3 VkpMKWrexc2TOhxvxN6yf9JnqZp4LnyaleTYhdAjN3xE/gNr9bLTuSaMTnjifmzO bT2E392LwTMeNNd+5SO/PnvumbsVfATL44OIa510qzI/KSBO1cDZFHPuxV7wTVpk SLfAXVLmvcdJDRN4Zye9y0gzHgNnUwmGkoXTMROEXI2om7Q/hz5Ag2GgxVslTz7o KlPOsl4F3dCLguXDQZhamU4UA1pLEwIo6fVyn5XuR0gtNhr8g+i0qb1y4VziMKdp BwjaUjzjgmoeYwDXQnGwIQ1tKpQ5z6B27VRHxSq1LN1ErUA23tLGx+QbFFtda8je KdxElNP/uRerArk0vmZKkeklAu3i4+HpSv212IUKPWYbGvsZd4ji10heX6Rgc57V ei12/0jJRb91h4jMNoSFoN9lPW/kV8hhM67pLLj9iJIG/771Kx6jK8RxXKi/aIQP zanrlMhL97uccoQ9L37m2DDwE9aYSw7WLlFaf7PWJO6yhmzzdFWydjl5YGobpp/v x1jk7eW0ThSzPpRLnC8VfcOTpabMLOSKFltW3P5KNhipRHxcDvtBOPX/8H0YA4NF gEtWI5eLdsY3z4h8KXv8eTrfKkQOIEd50eUVpnw3JVwLPCCl8gKQWvE28PFV1WUk bk0kj54= =VCQ5 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaO7aYACgkQYKtH/8kJ Uie/dA//Szb10kTv1oGM8FxU0hjiHW5ehQ64zH92VCva93ypt9rej1nlN9Wb9F9p BRNBOIGl4PUeM3wgWNfFjzMOQcwsKwhp6blRxdsxaTKhmYCYrOJL/IO92hOuKr6L Vcyi/0ZOrNkHdOT79KAPmrFaAE4z83f95wUM68vbnF05EJ5tKYN0/QjgyFhoAZJT P3udsxArFYxInTZ6A1rtPn6Oirxiw2BYfgmo/LgkkA4du7amk2hfLMg2A2Z/xCXf 74OH8tWGmMAlp05yxd+mveUsU5pjBF1AnBOMj779DcsfhCmj/eHZR5mDrPpp4cfC lNBF7tx5JoeHRFhcIIYW1AeWkU9fSKjoo7o3l6DR9bolC+uAJoZs+3nQGyc6ux7S xmQgW8cN6sdKD0y7PFJyO+QPZcAjFM5LTbDtcRBuTVZNrQIb3SmY1DkzAY1QwZW5 pt7mqOz4odWFeB/E2p93fAuRQZrChJ4+DYSkrqwhRN8PBK1ndMIyEgB7OPqqFMUG 5xPEURY4ATFTYVteS+sqWn1HlYoc2RzKLsY1w9vvy8X0A4nFnnauW/OhPmfwvyel 3Wbt0PqdZqUPWvD5WJ3ST44Q4O0KUFLlw3whPZYv1kcfw861YdOYoRUMCvQ9i4kG 0NCJa4adS+jj63RsPcoy7MZAxsaZx+HWLVM9ukPOC1UO9vPjtCk= =4XS5 -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner SoC device tree changes for 6.11 part 2 One additional peripheral enabled for the H616. - H616 crypto engine added * tag 'sunxi-dt-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h616: add crypto engine node Link: https://lore.kernel.org/r/Zo7O73Afx7lZcBRi@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Andre Przywara
|
6ed9a85f1c |
arm64: dts: allwinner: h616: add crypto engine node
The Allwinner H616 SoC contains a crypto engine very similar to the H6 version, but with all base addresses in the DMA descriptors shifted by two bits. This requires a new compatible string. Also the H616 CE relies on the internal osciallator for the TRNG operation, so we need to reference this clock. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20240624232110.9817-5-andre.przywara@arm.com [wens@csie.org: fix up register range size] Signed-off-by: Chen-Yu Tsai <wens@csie.org> |
||
|
Arnd Bergmann
|
d2a4a07190 |
arm64: rework compat syscall macros
The generated asm/unistd_compat_32.h header file now contains macros that can be used directly in the vdso and the signal trampolines, so remove the duplicate definitions. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
e632bca07c |
arm64: generate 64-bit syscall.tbl
Change the asm/unistd.h header for arm64 to no longer include asm-generic/unistd.h itself, but instead generate both the asm/unistd.h contents and the list of entry points using the syscall.tbl scripts that we use on most other architectures. Once his is done for the remaining architectures, the generic unistd.h header can be removed and the generated tbl file put in its place. The Makefile changes are more complex than they should be, I need a little help to improve those. Ideally this should be done in an architecture-independent way as well. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
7fe33e9f66 |
arm64: convert unistd_32.h to syscall.tbl format
This is a straight conversion from the old asm/unistd32.h into the format used by 32-bit arm and most other architectures, calling scripts to generate the asm/unistd32.h header and a new asm/syscalls32.h headers. I used a semi-automated text replacement method to do the conversion, and then used 'vimdiff' to synchronize the whitespace and the (unused) names of the non-compat syscalls with the arm version. There are two differences between the generated syscalls names and the old version: - the old asm/unistd32.h contained only a __NR_sync_file_range2 entry, while the arm32 version also defines __NR_arm_sync_file_range with the same number. I added this duplicate back in asm/unistd32.h. - __NR__sysctl was removed from the arm64 file a while ago, but all the tables still contain it. This should probably get removed everywhere but I added it here for consistency. On top of that, the arm64 version does not contain any references to the 32-bit OABI syscalls that are not supported by arm64. If we ever want to share the file between arm32 and arm64, it would not be hard to add support for both in one file. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
505d66d1ab |
clone3: drop __ARCH_WANT_SYS_CLONE3 macro
When clone3() was introduced, it was not obvious how each architecture deals with setting up the stack and keeping the register contents in a fork()-like system call, so this was left for the architecture maintainers to implement, with __ARCH_WANT_SYS_CLONE3 defined by those that already implement it. Five years later, we still have a few architectures left that are missing clone3(), and the macro keeps getting in the way as it's fundamentally different from all the other __ARCH_WANT_SYS_* macros that are meant to provide backwards-compatibility with applications using older syscalls that are no longer provided by default. Address this by reversing the polarity of the macro, adding an __ARCH_BROKEN_SYS_CLONE3 macro to all architectures that don't already provide the syscall, and remove __ARCH_WANT_SYS_CLONE3 from all the other ones. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
28323a7561 |
A few more Arm64 DeviceTree updates for v6.11
This introduces support for Lenovo Thinkpad Yoga slim 7x, LG Leon LTE, and LG K10 (K420n). In addition to this, all Gen-1 platforms gets the DWC3 quirk to disable "SuperSpeed in park mode", which resolves an instabliity issue seen in host mode. For Fairphone 4, PM6150L and PMK8003 thermal sensors are added and thermal zones defined. Two fastrpc contexts on SM6350 are marked as non-secure, to allow non-secure usage. The video clock controller on SM8150 is introduced. IPQ9574 GCC is marked as a interconnect provider. The vibrator block in the PM6150 is described. On SC7280 the download mode register is defined for SCM, allowing it to enable/disable the ramdump support during a system crash. Lastly, add a mailmap entry for Luca Weiss. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmaNjqMVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FdNwP/jMB1vTGZcaYwVGVEYIkUeuuflSr xdrUShN0EzNlB7XPo2yRZakAY4ndINQssC89Z4WYvMMytf+2qWQgGNrAbWme/Nmo /0r7Mqly2ueSN+fCG2s80HQRuuwjhM7KJ1WZ1PN46FNYOqis1eTchzv7Mi9biDgY 4HaVqqwNd6T6VZgIJJqV059XpmFw1RSKJdBjVD1ggn/7MMk2ueeY66iIJqSQC9KF zjqo5pXfwlpHJWUMATNEzfUQwqJ2vD/uR36I7qUVNq7WLZKeWjhp8pYERw1jLt76 93wwMlTXV3vX0yin0ZviQyv+YcxNmTF6V99TZiEs8kSsQ47HgwpTVvdq5dGuKVIg lfe+pfrltIoJn11wmz5hFFcRRvsLzDFOs5dY8kis3i+7nTzRE57gdM5YL4H+Z1VU VA0Z0NImSC+l6PwOZ+QW5v78xRrdDZplj0MpKNvcNERnTXipTcp65oqZY3E+GAro LrYAlLI3oAlNAKYSDk3YBRDami3WrjGy8BZwxKE/VXb0ZcEPCQKMt/17njwLBrqj rslU5tlyeuSxebg08mSIML6N1xOOndO6Ny0FDmqsNf1MiMxPQ+0Cw22P71bnb+8W VPhLmmq1YOAWPH6WKq1Ng4wId7J9GcwMOkvZZsFuwNx35RNLHhKH1Or961K0+vdI /qKRNZjWFV6h7yBC =Qc/t -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaNqgkACgkQYKtH/8kJ UicSKxAAkXAizZjc3PBOQMPH6AwkawwRR7hZDSS5lPLk42cjC5OiWP26q+guulJj SH6CYr9xftVshW9oSTlvEiI+pOp7lygaBNU76BPWmj9/cbS1pJPVBFz3BVdgCCZF 7Zxy7J1d01yIOtDTc+gpAsozWwRLN+frGgg5SJYPKt6sgnTtk4VaulW1rpvHXDJv xdkSlcc34AidKODZ1rCCXrCM5Pi/lxRw8rmj4foSSEW+BZtaCSFT8SbsQ0F3XezS xeIan3vN7uZydazKhefIrQlJfNiZ3gvYFsYYS//lCcGY7fim3pVwfHPnEq0MkPI3 b7YiqpGaLxUKg5pjqobo6ChvTISggbdS38gP/814IzusKIYE6xO4Ff5rEtBNtUMV uzS1ZLok82EOYFtL9DBz3BHdAHOGqKoU5+qW823Th+XTfKJNLxkPRZhM+JB6ChPl wJZDXc1YQdMrhjaP4MCZJL09b/pCfKh0ue8XJo9H7/7FtqSp6ACjvif47Rd36Yri wFBl/EB2qouY6hhsWASE4Ag+P5+DgtBnpybFv88O9dVx7STb5xXNzO45i+9BEDES HsAj+xHsNcMOW+YHhgHHZySYTYpFhvaO8AU4R6ZYgDi6Jg2VidBpvofgdzXslsKb e+kDNOEy4I20ci/it05lJjX2D2oxlT37ooC1aZskuUCa0vCiYzs= =naka -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt A few more Arm64 DeviceTree updates for v6.11 This introduces support for Lenovo Thinkpad Yoga slim 7x, LG Leon LTE, and LG K10 (K420n). In addition to this, all Gen-1 platforms gets the DWC3 quirk to disable "SuperSpeed in park mode", which resolves an instabliity issue seen in host mode. For Fairphone 4, PM6150L and PMK8003 thermal sensors are added and thermal zones defined. Two fastrpc contexts on SM6350 are marked as non-secure, to allow non-secure usage. The video clock controller on SM8150 is introduced. IPQ9574 GCC is marked as a interconnect provider. The vibrator block in the PM6150 is described. On SC7280 the download mode register is defined for SCM, allowing it to enable/disable the ramdump support during a system crash. Lastly, add a mailmap entry for Luca Weiss. * tag 'qcom-arm64-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (22 commits) mailmap: Update Luca Weiss's email address arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE arm64: dts: qcom: msm8916-lg-m216: Add initial device tree dt-bindings: arm: qcom: Add msm8916 based LG devices arm64: dts: qcom: ipq9574: Add icc provider ability to gcc dt-bindings: interconnect: Add Qualcomm IPQ9574 support arm64: dts: qcom: sm8150: Add video clock controller node arm64: dts: qcom: pm6150: Add vibrator arm64: dts: qcom: sc7280: Enable download mode register write arm64: dts: qcom: sm7225-fairphone-fp4: Add PM6150L thermals arm64: dts: qcom: sm7225-fairphone-fp4: Add PMK8003 thermals arm64: dts: qcom: sm6350: Add missing qcom,non-secure-domain property arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB arm64: dts: qcom: msm8996: Disable SS instance in Parkmode for USB arm64: dts: qcom: sm6350: Disable SS instance in Parkmode for USB arm64: dts: qcom: sm6115: Disable SS instance in Parkmode for USB arm64: dts: qcom: sdm630: Disable SS instance in Parkmode for USB arm64: dts: qcom: msm8998: Disable SS instance in Parkmode for USB arm64: dts: qcom: ipq8074: Disable SS instance in Parkmode for USB arm64: dts: qcom: ipq6018: Disable SS instance in Parkmode for USB ... Link: https://lore.kernel.org/r/20240709193406.3966-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Paolo Abeni
|
7b769adc26 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZoxN0AAKCRDbK58LschI g0c5AQDa3ZV9gfbN42y1zSDoM1uOgO60fb+ydxyOYh8l3+OiQQD/fLfpTY3gBFSY 9yi/pZhw/QdNzQskHNIBrHFGtJbMxgs= =p1Zz -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-07-08 The following pull-request contains BPF updates for your *net-next* tree. We've added 102 non-merge commits during the last 28 day(s) which contain a total of 127 files changed, 4606 insertions(+), 980 deletions(-). The main changes are: 1) Support resilient split BTF which cuts down on duplication and makes BTF as compact as possible wrt BTF from modules, from Alan Maguire & Eduard Zingerman. 2) Add support for dumping kfunc prototypes from BTF which enables both detecting as well as dumping compilable prototypes for kfuncs, from Daniel Xu. 3) Batch of s390x BPF JIT improvements to add support for BPF arena and to implement support for BPF exceptions, from Ilya Leoshkevich. 4) Batch of riscv64 BPF JIT improvements in particular to add 12-argument support for BPF trampolines and to utilize bpf_prog_pack for the latter, from Pu Lehui. 5) Extend BPF test infrastructure to add a CHECKSUM_COMPLETE validation option for skbs and add coverage along with it, from Vadim Fedorenko. 6) Inline bpf_get_current_task/_btf() helpers in the arm64 BPF JIT which gives a small 1% performance improvement in micro-benchmarks, from Puranjay Mohan. 7) Extend the BPF verifier to track the delta between linked registers in order to better deal with recent LLVM code optimizations, from Alexei Starovoitov. 8) Fix bpf_wq_set_callback_impl() kfunc signature where the third argument should have been a pointer to the map value, from Benjamin Tissoires. 9) Extend BPF selftests to add regular expression support for test output matching and adjust some of the selftest when compiled under gcc, from Cupertino Miranda. 10) Simplify task_file_seq_get_next() and remove an unnecessary loop which always iterates exactly once anyway, from Dan Carpenter. 11) Add the capability to offload the netfilter flowtable in XDP layer through kfuncs, from Florian Westphal & Lorenzo Bianconi. 12) Various cleanups in networking helpers in BPF selftests to shave off a few lines of open-coded functions on client/server handling, from Geliang Tang. 13) Properly propagate prog->aux->tail_call_reachable out of BPF verifier, so that x86 JIT does not need to implement detection, from Leon Hwang. 14) Fix BPF verifier to add a missing check_func_arg_reg_off() to prevent an out-of-bounds memory access for dynpointers, from Matt Bobrowski. 15) Fix bpf_session_cookie() kfunc to return __u64 instead of long pointer as it might lead to problems on 32-bit archs, from Jiri Olsa. 16) Enhance traffic validation and dynamic batch size support in xsk selftests, from Tushar Vyavahare. bpf-next-for-netdev * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (102 commits) selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep selftests/bpf: amend for wrong bpf_wq_set_callback_impl signature bpf: helpers: fix bpf_wq_set_callback_impl signature libbpf: Add NULL checks to bpf_object__{prev_map,next_map} selftests/bpf: Remove exceptions tests from DENYLIST.s390x s390/bpf: Implement exceptions s390/bpf: Change seen_reg to a mask bpf: Remove unnecessary loop in task_file_seq_get_next() riscv, bpf: Optimize stack usage of trampoline bpf, devmap: Add .map_alloc_check selftests/bpf: Remove arena tests from DENYLIST.s390x selftests/bpf: Add UAF tests for arena atomics selftests/bpf: Introduce __arena_global s390/bpf: Support arena atomics s390/bpf: Enable arena s390/bpf: Support address space cast instruction s390/bpf: Support BPF_PROBE_MEM32 s390/bpf: Land on the next JITed instruction after exception s390/bpf: Introduce pre- and post- probe functions s390/bpf: Get rid of get_probe_mem_regno() ... ==================== Link: https://patch.msgid.link/20240708221438.10974-1-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Linus Torvalds
|
94a2bc0f61 |
arm64: add 'runtime constant' support
This implements the runtime constant infrastructure for arm64, allowing the dcache d_hash() function to be generated using as a constant for hash table address followed by shift by a constant of the hash index. [ Fixed up to deal with the big-endian case as per Mark Rutland ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Arnd Bergmann
|
1ba6c6f466 |
i.MX SoC change for 6.11:
- Remove redundant EDAC_SUPPORT selection from ARCH_LAYERSCAPE -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmaDqNYUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM6Hxwf/dzVKLX0W9qbqcWpXlJfMzxw5Lrb0 m5xMS1ks/PrJBfzQfnWWpn+LfLTXtonutvQuVai5BAEbhbtswGxJMZEmdvzp8pNK CMKLgP4j+GbW4Zuj75Wqi26v7DT3vT15B2hPOQdU9HVWKdo8mDHmWUSsAU7dSWtj CtpsxJYqvkfdI53NcUK1z93CnebtMlw2viHoRyPBtS5KL47u23DTZUvirHNpde3O tGVkaWEaqpVnbpzXV6VLZGfch/EzyF1NSO9szpqT80n4gi08sUc2SFgeHZ0MPWBE xk0sjwydG6XG6Sl5siHfYljurUHOZp8lu5X5jiFYylYPCmtTjV0vnltHzg== =UEB0 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaNOV8ACgkQYKtH/8kJ UieiKg//eoQ6zjwriGpDt6yQuKc1fg4+f+Jvfn/rQPq1FYmm/8I1QRJEIzPFXZE0 EHDy5W+kIieNFSbFx2jWJziE7SIoF0QagTsUSoOBDu3EuIjzA7A0DoCBXeZZwWMw D72RHScZaHuSX8FEofPZ89Mf1cKOHwNcSUMCy3EovatP+NKt5Tioj9Pt3nrjUeAT J3srH9Lrnuz7FumcqwPyfnesflo2OrXbJqjyBinXecglxkDhyXCBU5BGVMPvsJYz PhBZp42OY4fAAX9Vij3aRN0mPJInLFpxCwbRaTNjhv9n11FCTftJpviSHVTYGfU9 rblj+MMXkxW4S1HZiSu8QyrYpMNu56/hU/1lqO7JeWfR5VkPuZT4OOKf/GUE734v VGIoXbyHTVjO/KhH5irfbNmDmcKzrhi/pdcRMFUmhu9qB8PU/42EY5+NJfuRLl5x HvVCSQYYByUE3ZhwUKpK662dqzgE5CMckvRCoLQzHWgECQc6QWG92qxOSwfy06g1 MILhEo7WnSge0epVBnueqUTEpDPtDnPukDrQ/E/SqhXGVW7rhiFPsic8o7xiEgBa ifPLwmmBGYLgzEpLqMvdzFyzdC3gTfpzXstnLKcxQgP+9SoVrdcY0fY9Ow1cQsQk c3t6hkaeESmAdYSuH65mMIm+eR5EoIAiePTIupRUP5CohLyyFmc= =Ik8x -----END PGP SIGNATURE----- Merge tag 'imx-soc-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/arm i.MX SoC change for 6.11: - Remove redundant EDAC_SUPPORT selection from ARCH_LAYERSCAPE * tag 'imx-soc-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: layerscape: remove redundant EDAC_SUPPORT selection Link: https://lore.kernel.org/r/20240702142153.413061-1-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
2bb1acc608 |
Reset controller updates for v6.11, part 2
This tag adds USB VBUS regulator control for Renesas RZ/G2L SoCs, which also touches PHY driver and device tree, and pulls in a new regulator_hardware_enable() helper. The Tegra BPMP reset driver can be compiled under COMPILE_TEST now. -----BEGIN PGP SIGNATURE----- iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCZoUaTRcccC56YWJlbEBw ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwLORAQCMpFmwFHo92VYuDHb0td2cEwLV ncK1WrlYWHfdAoqI1gEA/qZrIcutWXd+5DCu6W6cJKls00P+8h5vTnzGmIpXsg4= =JbtH -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaM/xcACgkQYKtH/8kJ Uiejaw//cwCzzJAZiPSpqqPIZ/eCZqZK0lKyLMFsjsMi/XCoP95ZFVRJ4IusWha3 c0NZzjd+7bBx//SbWJY0ENw31VWlkZjASLPOLLn5rMfaMEMNLT9J3LjcY5vITpll OYIDDo/XtmjWzH3DGqbTb5Yi1YCESjeeMqtoJTxvgeVITuE7SIYc3O8sSSOpuJmB DSABrncxhOLK0BHaugbt7/golMxvNDhHjKPTDAv4nSqJDYEhjXaAtW6QOKBXCMgz uWDmzVyTXpTSkl/LIM+4i1Wald5CX5BTqHi8itrPDFZ/mbWQo+mT5fCh2KjeuJlk +y/h7kDdPuqJSPXMqNjbtZU5rfonsc9bXLjMEVZaiy5GtbNhGgOQgCN8L8kflsei 5XN3CX0ydLoxypXRUD7EXRemU59btqy5/x02grewE/SXPMkcHIEbPD9hNf8Ly8Ee Gdxl61YBAXLP4J5RcEHBoPQ1nY7hSzfgAP8BINTk8V6Thi3nOQOzEfaWuaJmYxM9 uH1S3lId4XoHldjLh9ob3sBtINGfjedrkZQ5aV72l9SuhiVnHkNjHRD8jAraxqdG kasWEhesUe5KoqmaZSxE199JLU8CqmIfVx2hMOr9w19tSldWuscIqkx8vKYDkcnj KXFa1qQY664B2HW/qamZp6MoolGvCjvu1LoJAScj8WyFL9gwYoA= =RppS -----END PGP SIGNATURE----- Merge tag 'reset-for-v6.11-2' of git://git.pengutronix.de/pza/linux into soc/drivers Reset controller updates for v6.11, part 2 This tag adds USB VBUS regulator control for Renesas RZ/G2L SoCs, which also touches PHY driver and device tree, and pulls in a new regulator_hardware_enable() helper. The Tegra BPMP reset driver can be compiled under COMPILE_TEST now. * tag 'reset-for-v6.11-2' of git://git.pengutronix.de/pza/linux: arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS phy: renesas: phy-rcar-gen3-usb2: Control VBUS for RZ/G2L SoCs reset: renesas: Add USB VBUS regulator device as child dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document USB VBUS regulator reset: tegra-bpmp: allow building under COMPILE_TEST regulator: core: Add helper for allow HW access to enable/disable regulator Link: https://lore.kernel.org/r/20240703100809.2773890-1-p.zabel@pengutronix.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Pascal Paillet
|
e9a316affb
|
arm64: stm32: enable scmi regulator for stm32
Add SCMI ARM REGULATOR configuration for stm32. Signed-off-by: Pascal Paillet <p.paillet@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240705134554.2833835-1-alexandre.torgue@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
ad828298af |
Three new boards, some improvements for the Lunzn Fastrhino R6xS boards,
allowing dma on uarts connected to bluetooth modules and an update for the gpu operating points on rk356x. As well as some minor fixes for missing power-dmains and ethernet phy binding adherence. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmaMZvcQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgaSfCAC1TuxdQmBvHYAn1aLdGLYpU6u1ezvPynGg eR9dyiQZPiDAyHMCuZl5E8shIb+hnGJtvPP2+sleb1YVEK+FHNPKYu7ZD36Z3aHW I1YVSVFq6r/dq5LPBxhAs4It6mTQ9sBrEOHFluSuR/Ny/ERsxBBh2QdG6q0f6vlF lwWTxvQtGpFMgvf+UVeNTmjEbA//Xnvi/BP4NyrQkfNAfeTHav1JlpEVbuKRt+2R WpFk/RviET9MuclNbGBlq8U1ggPxWch/o8f6Qz1R7wVymgiHihJwFIFk0eAFKyKd rTdf+H01KrDWkasAEsaWYG/4bWId+lppKVA0YUlk3sPRuiewAKl8 =VcOx -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaM+WAACgkQYKtH/8kJ UieAtg/+MinvUFuYNrsiUTsxnaMN0Z32nKM//WQ6pU8Rr4qK6X1Fa8WKkrB/sa2+ fqERdYTq6EX9U/zT3way9iuLkvLs4/tOnMGOOP0yKg5qMx3lYfAQ/r3ZfLnvurp4 +x/ErGfW63ZMSl95iq8+hM0tYK4lr+xl11zg7SCbC0zVeFn42wL70o3bNbSnW/cV qZRMER6mDymqhZ9Bf1tM7PDhzC9JhlYH3ZLi1ovAOZlMZpcOVBUraTxupkAAvKJW wp7WsA64PJ3uPyNVbQZG27kRgG9Qu5zjI8a1f065l20GAhoviZmgO7Ygy3gkXhi/ aSiKG31VIrXPb/bKhXlhbhKUPigAo3aJQ8teNochniTxSXoQxeLXeoopnHe2znG1 AYhlpaU+wecu3oGq9cI5rHBQ2I0glQYXbmTV9+CCJJoGxyr+kk6OmBBMbplbGltK YCG6kNpnPbPJNAHyZesJNVfclKcJrKI/nepu56N0gFNkMQUWFgDFOLaHMdm/9zvm GJO/OmB1p/uOL42TctQ3D5JoyyiohjB+aUWViujMPeFGjOvROLDhCllQSNE5gDK2 BpTKFdsyE69zy48BvZYIVg46bXa3iIn47d1et54Ze/kqhh6XYZ0RKNfr8m28ASSx CEwABBj7UX5xwAA60pIdnHapyZx+KTNRg6eEs/ChTsao3EkC82k= =lz4I -----END PGP SIGNATURE----- Merge tag 'v6.11-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt These are two additional boards, the Xunlong Orange Pi 3B and the Add Radxa ROCK 3B. * tag 'v6.11-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add Xunlong Orange Pi 3B dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B arm64: dts: rockchip: Add Radxa ROCK 3B dt-bindings: arm: rockchip: Add Radxa ROCK 3B Link: https://lore.kernel.org/r/2191200.GUh0CODmnK@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
05a01ce773 |
i.MX defconfig change for 6.11:
- Enable a few drivers needed by TQMa7x/MBa7x and i.MX53 QSB/QSRB in imx_v6_v7_defconfig - Enable IWLWIFI driver support in arm64 defconfig -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmaMkBMUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM7NJAf/aclh+wyEjv6//5s+wgjwNeSgA+ED 8wtLSKReHWRO18R2JD5fHzuGYJfucS8Q8cyoN9/0oAZz6FAPh0H2W47CoTUy0r+8 uN9TDWnlPvHIR5j9J4/tFNC6FKjelf10cnX5EG1TRxtr6ep2OGiLBwV6J5HbmZZM MFiU3fcdO970iZmgazwXILPx99g/cO5JPKBzTr1cxbMmYsghPI89dvIwk/hc94sq GRIp/aBlwr5zZjwQCSxFm6Qa3hermjn+sjvTZ7Vm6XPVQauLzhvn6x8stZ8UHaXy NW4n/OYFuH4CaVGLbJffwkf9PKp9+yGheW7EeNyeFFjYAfeipOQT3OBcww== =aoed -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaM1uYACgkQYKtH/8kJ UifCmhAAyybWIPFdoorZbLKiPjDDYtduOO+zhArzjv58DUA4wMDBk59zFU5+2TkM RekyKv6mK8NtKPqYqxe3ohb72NLxWxrmEivbwGGf8CP0OYTEayv0w3syhB2pq26Y +3iJlQVm2sonMY2P8A2rk9LhVwLumCdAWfD7hXZDc9B8ttJQVD4tVs6ce7RQ+mKS cNB0wXOIqSQoPYF6hz3EED7qmfBP79aO/ltgqas5SQq2U1wokpn9rSydsgqdTFIF RgM6WlwU9MzttYksgGcYMX7O0Qw0Zr3OD2YzEnKJgnCRSFSnr67vuo5dr+XJmuUh mN/pcfJfxOakORIRD1yVaHKyWI2uf7GFFJkXYUxH5rm6zHyj+ouNyC742QPx8gqK riOA3yQa4WUdu4XEWIN4LUsdVgBvNF+z7shyVGqUSDJO4iDjtrcdReV8L7b2CgN2 h17KaI80LWBogHRP7p0WmOXc5bqTYoDqS+P10FBvDMrXFfJNiGQjoyeiA8sfGRpl 0Nn0heNPWJCqAj8pcLIKJ0CT9SN4NBfmozuzrJuHjCIfhC+xUuPOZy4mAOkIYt8O GWrNep3ug0aXaUFnBqf6SxhiZCQ+t+mLt/pXE5pmHnuAYJbJVP1F2FXA2UaU9n19 vxvLxQ6pJetPqH6mZGFsOSvp4RN9CNxr7/PWUl83HhGSpGK0PPQ= =qdjg -----END PGP SIGNATURE----- Merge tag 'imx-defconfig-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig i.MX defconfig change for 6.11: - Enable a few drivers needed by TQMa7x/MBa7x and i.MX53 QSB/QSRB in imx_v6_v7_defconfig - Enable IWLWIFI driver support in arm64 defconfig * tag 'imx-defconfig-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: Enable the IWLWIFI driver ARM: imx_v6_v7_defconfig: enable DRM_SII902X and DRM_DISPLAY_CONNECTOR ARM: imx_v6_v7_defconfig: Enable drivers for TQMa7x/MBa7x Link: https://lore.kernel.org/r/20240709012534.3106441-1-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Fabio Estevam
|
465830ad25 |
arm64: defconfig: Enable the IWLWIFI driver
The IOT-GATE-iMX8 board has an Intel Wifi 6 AX200 module. Enable the IWLWIFI driver so that Wifi can work by default. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
||
Jonas Karlman
|
d79d713d60 |
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
The Xunlong Orange Pi 3B is a single-board computer based on the Rockchip RK3566 SoC. Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20240626230319.1425316-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de> |