0
0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-18 00:24:58 +08:00
Commit Graph

4879 Commits

Author SHA1 Message Date
Baokun Li
4f18d187fb ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS
commit 2dcf5fde6d upstream.

For files with logical blocks close to EXT_MAX_BLOCKS, the file size
predicted in ext4_mb_normalize_request() may exceed EXT_MAX_BLOCKS.
This can cause some blocks to be preallocated that will not be used.
And after [Fixes], the following issue may be triggered:

=========================================================
 kernel BUG at fs/ext4/mballoc.c:4653!
 Internal error: Oops - BUG: 00000000f2000800 [] SMP
 CPU: 1 PID: 2357 Comm: xfs_io 6.7.0-rc2-00195-g0f5cc96c367f
 Hardware name: linux,dummy-virt (DT)
 pc : ext4_mb_use_inode_pa+0x148/0x208
 lr : ext4_mb_use_inode_pa+0x98/0x208
 Call trace:
  ext4_mb_use_inode_pa+0x148/0x208
  ext4_mb_new_inode_pa+0x240/0x4a8
  ext4_mb_use_best_found+0x1d4/0x208
  ext4_mb_try_best_found+0xc8/0x110
  ext4_mb_regular_allocator+0x11c/0xf48
  ext4_mb_new_blocks+0x790/0xaa8
  ext4_ext_map_blocks+0x7cc/0xd20
  ext4_map_blocks+0x170/0x600
  ext4_iomap_begin+0x1c0/0x348
=========================================================

Here is a calculation when adjusting ac_b_ex in ext4_mb_new_inode_pa():

	ex.fe_logical = orig_goal_end - EXT4_C2B(sbi, ex.fe_len);
	if (ac->ac_o_ex.fe_logical >= ex.fe_logical)
		goto adjust_bex;

The problem is that when orig_goal_end is subtracted from ac_b_ex.fe_len
it is still greater than EXT_MAX_BLOCKS, which causes ex.fe_logical to
overflow to a very small value, which ultimately triggers a BUG_ON in
ext4_mb_new_inode_pa() because pa->pa_free < len.

The last logical block of an actual write request does not exceed
EXT_MAX_BLOCKS, so in ext4_mb_normalize_request() also avoids normalizing
the last logical block to exceed EXT_MAX_BLOCKS to avoid the above issue.

The test case in [Link] can reproduce the above issue with 64k block size.

Link: https://patchwork.kernel.org/project/fstests/list/?series=804003
Cc:  <stable@kernel.org> # 6.4
Fixes: 93cdf49f6e ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231127063313.3734294-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-20 17:02:01 +01:00
Jan Kara
73dddf9858 ext4: fix warning in ext4_dio_write_end_io()
[ Upstream commit 619f75dae2 ]

The syzbot has reported that it can hit the warning in
ext4_dio_write_end_io() because i_size < i_disksize. Indeed the
reproducer creates a race between DIO IO completion and truncate
expanding the file and thus ext4_dio_write_end_io() sees an inconsistent
inode state where i_disksize is already updated but i_size is not
updated yet. Since we are careful when setting up DIO write and consider
it extending (and thus performing the IO synchronously with i_rwsem held
exclusively) whenever it goes past either of i_size or i_disksize, we
can use the same test during IO completion without risking entering
ext4_handle_inode_extension() without i_rwsem held. This way we make it
obvious both i_size and i_disksize are large enough when we report DIO
completion without relying on unreliable WARN_ON.

Reported-by:  <syzbot+47479b71cdfc78f56d30@syzkaller.appspotmail.com>
Fixes: 91562895f8 ("ext4: properly sync file size update after O_SYNC direct IO")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20231130095653.22679-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20 17:01:42 +01:00
Brian Foster
7343c23ebc ext4: fix racy may inline data check in dio write
commit ce56d21355 upstream.

syzbot reports that the following warning from ext4_iomap_begin()
triggers as of the commit referenced below:

        if (WARN_ON_ONCE(ext4_has_inline_data(inode)))
                return -ERANGE;

This occurs during a dio write, which is never expected to encounter
an inode with inline data. To enforce this behavior,
ext4_dio_write_iter() checks the current inline state of the inode
and clears the MAY_INLINE_DATA state flag to either fall back to
buffered writes, or enforce that any other writers in progress on
the inode are not allowed to create inline data.

The problem is that the check for existing inline data and the state
flag can span a lock cycle. For example, if the ilock is originally
locked shared and subsequently upgraded to exclusive, another writer
may have reacquired the lock and created inline data before the dio
write task acquires the lock and proceeds.

The commit referenced below loosens the lock requirements to allow
some forms of unaligned dio writes to occur under shared lock, but
AFAICT the inline data check was technically already racy for any
dio write that would have involved a lock cycle. Regardless, lift
clearing of the state bit to the same lock critical section that
checks for preexisting inline data on the inode to close the race.

Cc: stable@kernel.org
Reported-by: syzbot+307da6ca5cb0d01d581a@syzkaller.appspotmail.com
Fixes: 310ee0902b ("ext4: allow concurrent unaligned dio overwrites")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20231002185020.531537-1-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28 17:20:16 +00:00
Jan Kara
3eb32071b5 ext4: properly sync file size update after O_SYNC direct IO
commit 91562895f8 upstream.

Gao Xiang has reported that on ext4 O_SYNC direct IO does not properly
sync file size update and thus if we crash at unfortunate moment, the
file can have smaller size although O_SYNC IO has reported successful
completion. The problem happens because update of on-disk inode size is
handled in ext4_dio_write_iter() *after* iomap_dio_rw() (and thus
dio_complete() in particular) has returned and generic_file_sync() gets
called by dio_complete(). Fix the problem by handling on-disk inode size
update directly in our ->end_io completion handler.

References: https://lore.kernel.org/all/02d18236-26ef-09b0-90ad-030c4fe3ee20@linux.alibaba.com
Reported-by: Gao Xiang <hsiangkao@linux.alibaba.com>
CC: stable@vger.kernel.org
Fixes: 378f32bab3 ("ext4: introduce direct I/O write using iomap infrastructure")
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20231013121350.26872-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28 17:20:16 +00:00
Kemeng Shi
1a657b36c1 ext4: add missed brelse in update_backups
commit 9adac8b01f upstream.

add missed brelse in update_backups

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28 17:20:16 +00:00
Kemeng Shi
b88c91b287 ext4: remove gdb backup copy for meta bg in setup_new_flex_group_blocks
commit 40dd7953f4 upstream.

Wrong check of gdb backup in meta bg as following:
first_group is the first group of meta_bg which contains target group, so
target group is always >= first_group. We check if target group has gdb
backup by comparing first_group with [group + 1] and [group +
EXT4_DESC_PER_BLOCK(sb) - 1]. As group >= first_group, then [group + N] is
> first_group. So no copy of gdb backup in meta bg is done in
setup_new_flex_group_blocks.

No need to do gdb backup copy in meta bg from setup_new_flex_group_blocks
as we always copy updated gdb block to backups at end of
ext4_flex_group_add as following:

ext4_flex_group_add
  /* no gdb backup copy for meta bg any more */
  setup_new_flex_group_blocks

  /* update current group number */
  ext4_update_super
    sbi->s_groups_count += flex_gd->count;

  /*
   * if group in meta bg contains backup is added, the primary gdb block
   * of the meta bg will be copy to backup in new added group here.
   */
  for (; gdb_num <= gdb_num_end; gdb_num++)
    update_backups(...)

In summary, we can remove wrong gdb backup copy code in
setup_new_flex_group_blocks.

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28 17:20:15 +00:00
Zhang Yi
afe944f1f1 ext4: correct the start block of counting reserved clusters
commit 40ea98396a upstream.

When big allocate feature is enabled, we need to count and update
reserved clusters before removing a delayed only extent_status entry.
{init|count|get}_rsvd() have already done this, but the start block
number of this counting isn't correct in the following case.

  lblk            end
   |               |
   v               v
          -------------------------
          |                       | orig_es
          -------------------------
                   ^              ^
      len1 is 0    |     len2     |

If the start block of the orig_es entry founded is bigger than lblk, we
passed lblk as start block to count_rsvd(), but the length is correct,
finally, the range to be counted is offset. This patch fix this by
passing the start blocks to 'orig_es->lblk + len1'.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230824092619.1327976-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28 17:20:15 +00:00
Kemeng Shi
409e2d00c2 ext4: correct return value of ext4_convert_meta_bg
commit 48f1551592 upstream.

Avoid to ignore error in "err".

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230826174712.4059355-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28 17:20:15 +00:00
Ojaswin Mujoo
c26e3adc65 ext4: mark buffer new if it is unwritten to avoid stale data exposure
commit 2cd8bdb5ef upstream.

** Short Version **

In ext4 with dioread_nolock, we could have a scenario where the bh returned by
get_blocks (ext4_get_block_unwritten()) in __block_write_begin_int() has
UNWRITTEN and MAPPED flag set. Since such a bh does not have NEW flag set we
never zero out the range of bh that is not under write, causing whatever stale
data is present in the folio at that time to be written out to disk. To fix this
mark the buffer as new, in case it is unwritten, in ext4_get_block_unwritten().

** Long Version **

The issue mentioned above was resulting in two different bugs:

1. On block size < page size case in ext4, generic/269 was reliably
failing with dioread_nolock. The state of the write was as follows:

  * The write was extending i_size.
  * The last block of the file was fallocated and had an unwritten extent
  * We were near ENOSPC and hence we were switching to non-delayed alloc
    allocation.

In this case, the back trace that triggers the bug is as follows:

  ext4_da_write_begin()
    /* switch to nodelalloc due to low space */
    ext4_write_begin()
      ext4_should_dioread_nolock() // true since mount flags still have delalloc
      __block_write_begin(..., ext4_get_block_unwritten)
        __block_write_begin_int()
          for(each buffer head in page) {
            /* first iteration, this is bh1 which contains i_size */
            if (!buffer_mapped)
              get_block() /* returns bh with only UNWRITTEN and MAPPED */
            /* second iteration, bh2 */
              if (!buffer_mapped)
                get_block() /* we fail here, could be ENOSPC */
          }
          if (err)
            /*
             * this would zero out all new buffers and mark them uptodate.
             * Since bh1 was never marked new, we skip it here which causes
             * the bug later.
             */
            folio_zero_new_buffers();
      /* ext4_wrte_begin() error handling */
      ext4_truncate_failed_write()
        ext4_truncate()
          ext4_block_truncate_page()
            __ext4_block_zero_page_range()
              if(!buffer_uptodate())
                ext4_read_bh_lock()
                  ext4_read_bh() -> ... ext4_submit_bh_wbc()
                    BUG_ON(buffer_unwritten(bh)); /* !!! */

2. The second issue is stale data exposure with page size >= blocksize
with dioread_nolock. The conditions needed for it to happen are same as
the previous issue ie dioread_nolock around ENOSPC condition. The issue
is also similar where in __block_write_begin_int() when we call
ext4_get_block_unwritten() on the buffer_head and the underlying extent
is unwritten, we get an unwritten and mapped buffer head. Since it is
not new, we never zero out the partial range which is not under write,
thus writing stale data to disk. This can be easily observed with the
following reproducer:

 fallocate -l 4k testfile
 xfs_io -c "pwrite 2k 2k" testfile
 # hexdump output will have stale data in from byte 0 to 2k in testfile
 hexdump -C testfile

NOTE: To trigger this, we need dioread_nolock enabled and write happening via
ext4_write_begin(), which is usually used when we have -o nodealloc. Since
dioread_nolock is disabled with nodelalloc, the only alternate way to call
ext4_write_begin() is to ensure that delayed alloc switches to nodelalloc ie
ext4_da_write_begin() calls ext4_write_begin(). This will usually happen when
ext4 is almost full like the way generic/269 was triggering it in Issue 1 above.
This might make the issue harder to hit. Hence, for reliable replication, I used
the below patch to temporarily allow dioread_nolock with nodelalloc and then
mount the disk with -o nodealloc,dioread_nolock. With this you can hit the stale
data issue 100% of times:

@@ -508,8 +508,8 @@ static inline int ext4_should_dioread_nolock(struct inode *inode)
  if (ext4_should_journal_data(inode))
    return 0;
  /* temporary fix to prevent generic/422 test failures */
- if (!test_opt(inode->i_sb, DELALLOC))
-   return 0;
+ // if (!test_opt(inode->i_sb, DELALLOC))
+ //  return 0;
  return 1;
 }

After applying this patch to mark buffer as NEW, both the above issues are
fixed.

Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/d0ed09d70a9733fbb5349c5c7b125caac186ecdf.1695033645.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28 17:20:15 +00:00
Kemeng Shi
a5ab5da038 ext4: correct offset of gdb backup in non meta_bg group to update_backups
commit 31f13421c0 upstream.

Commit 0aeaa2559d ("ext4: fix corruption when online resizing a 1K
bigalloc fs") found that primary superblock's offset in its group is
not equal to offset of backup superblock in its group when block size
is 1K and bigalloc is enabled. As group descriptor blocks are right
after superblock, we can't pass block number of gdb to update_backups
for the same reason.

The root casue of the issue above is that leading 1K padding block is
count as data block offset for primary block while backup block has no
padding block offset in its group.

Remove padding data block count to fix the issue for gdb backups.

For meta_bg case, update_backups treat blk_off as block number, do no
conversion in this case.

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28 17:20:15 +00:00
Max Kellermann
df562e04a1 ext4: apply umask if ACL support is disabled
commit 484fd6c1de upstream.

The function ext4_init_acl() calls posix_acl_create() which is
responsible for applying the umask.  But without
CONFIG_EXT4_FS_POSIX_ACL, ext4_init_acl() is an empty inline function,
and nobody applies the umask.

This fixes a bug which causes the umask to be ignored with O_TMPFILE
on ext4:

 https://github.com/MusicPlayerDaemon/MPD/issues/558
 https://bugs.gentoo.org/show_bug.cgi?id=686142#c3
 https://bugzilla.kernel.org/show_bug.cgi?id=203625

Reviewed-by: "J. Bruce Fields" <bfields@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/20230919081824.1096619-1-max.kellermann@ionos.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28 17:20:15 +00:00
Zhang Yi
3bc2023850 ext4: make sure allocate pending entry not fail
commit 8e387c89e9 upstream.

__insert_pending() allocate memory in atomic context, so the allocation
could fail, but we are not handling that failure now. It could lead
ext4_es_remove_extent() to get wrong reserved clusters, and the global
data blocks reservation count will be incorrect. The same to
extents_status entry preallocation, preallocate pending entry out of the
i_es_lock with __GFP_NOFAIL, make sure __insert_pending() and
__revise_pending() always succeeds.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230824092619.1327976-3-yi.zhang@huaweicloud.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28 17:20:15 +00:00
Wang Jianjian
825ba5adcb ext4: no need to generate from free list in mballoc
commit ebf6cb7c6e upstream.

Commit 7a2fcbf7f8 ("ext4: don't use blocks freed but not yet committed in
buddy cache init") added a code to mark as used blocks in the list of not yet
committed freed blocks during initialization of a buddy page. However
ext4_mb_free_metadata() makes sure buddy page is already loaded and takes a
reference to it so it cannot happen that ext4_mb_init_cache() is called
when efd list is non-empty. Just remove the
ext4_mb_generate_from_freelist() call.

Fixes: 7a2fcbf7f85('ext4: don't use blocks freed but not yet committed in buddy cache init')
Signed-off-by: Wang Jianjian <wangjianjian0@foxmail.com>
Link: https://lore.kernel.org/r/tencent_53CBCB1668358AE862684E453DF37B722008@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28 17:20:15 +00:00
Baokun Li
904fa65c26 ext4: fix race between writepages and remount
commit 745f17a416 upstream.

We got a WARNING in ext4_add_complete_io:
==================================================================
 WARNING: at fs/ext4/page-io.c:231 ext4_put_io_end_defer+0x182/0x250
 CPU: 10 PID: 77 Comm: ksoftirqd/10 Tainted: 6.3.0-rc2 
 RIP: 0010:ext4_put_io_end_defer+0x182/0x250 [ext4]
 [...]
 Call Trace:
  <TASK>
  ext4_end_bio+0xa8/0x240 [ext4]
  bio_endio+0x195/0x310
  blk_update_request+0x184/0x770
  scsi_end_request+0x2f/0x240
  scsi_io_completion+0x75/0x450
  scsi_finish_command+0xef/0x160
  scsi_complete+0xa3/0x180
  blk_complete_reqs+0x60/0x80
  blk_done_softirq+0x25/0x40
  __do_softirq+0x119/0x4c8
  run_ksoftirqd+0x42/0x70
  smpboot_thread_fn+0x136/0x3c0
  kthread+0x140/0x1a0
  ret_from_fork+0x2c/0x50
==================================================================

Above issue may happen as follows:

            cpu1                        cpu2
----------------------------|----------------------------
mount -o dioread_lock
ext4_writepages
 ext4_do_writepages
  *if (ext4_should_dioread_nolock(inode))*
    // rsv_blocks is not assigned here
                                 mount -o remount,dioread_nolock
  ext4_journal_start_with_reserve
   __ext4_journal_start
    __ext4_journal_start_sb
     jbd2__journal_start
      *if (rsv_blocks)*
        // h_rsv_handle is not initialized here
  mpage_map_and_submit_extent
    mpage_map_one_extent
      dioread_nolock = ext4_should_dioread_nolock(inode)
      if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN))
        mpd->io_submit.io_end->handle = handle->h_rsv_handle
        ext4_set_io_unwritten_flag
          io_end->flag |= EXT4_IO_END_UNWRITTEN
      // now io_end->handle is NULL but has EXT4_IO_END_UNWRITTEN flag

scsi_finish_command
 scsi_io_completion
  scsi_io_completion_action
   scsi_end_request
    blk_update_request
     req_bio_endio
      bio_endio
       bio->bi_end_io  > ext4_end_bio
        ext4_put_io_end_defer
	 ext4_add_complete_io
	  // trigger WARN_ON(!io_end->handle && sbi->s_journal);

The immediate cause of this problem is that ext4_should_dioread_nolock()
function returns inconsistent values in the ext4_do_writepages() and
mpage_map_one_extent(). There are four conditions in this function that
can be changed at mount time to cause this problem. These four conditions
can be divided into two categories:

    (1) journal_data and EXT4_EXTENTS_FL, which can be changed by ioctl
    (2) DELALLOC and DIOREAD_NOLOCK, which can be changed by remount

The two in the first category have been fixed by commit c8585c6fca
("ext4: fix races between changing inode journal mode and ext4_writepages")
and commit cb85f4d23f ("ext4: fix race between writepages and enabling
EXT4_EXTENTS_FL") respectively.

Two cases in the other category have not yet been fixed, and the above
issue is caused by this situation. We refer to the fix for the first
category, when applying options during remount, we grab s_writepages_rwsem
to avoid racing with writepages ops to trigger this problem.

Fixes: 6b523df4fb ("ext4: use transaction reservation for extent conversion in ext4_end_io")
Cc: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230524072538.2883391-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28 17:20:15 +00:00
Gou Hao
11d05f01cf ext4: move 'ix' sanity check to corrent position
[ Upstream commit af90a8f4a0 ]

Check 'ix' before it is used.

Fixes: 80e675f906 ("ext4: optimize memmmove lengths in extent/index insertions")
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Link: https://lore.kernel.org/r/20230906013341.7199-1-gouhao@uniontech.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20 11:59:20 +01:00
Theodore Ts'o
b9945f9004 ext4: add missing initialization of call_notify_error in update_super_work()
[ Upstream commit ee6a12d0d4 ]

Fixes: ff0722de89 ("ext4: add periodic superblock update check")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20 11:59:20 +01:00
Christian Brauner
50ec1d721e
Revert "ext4: switch to multigrain timestamps"
This reverts commit 0269b58586.

Users reported regressions due to enabling multi-grained timestamps
unconditionally. As no clear consensus on a solution has come up and the
discussion has gone back to the drawing board revert the infrastructure
changes for. If it isn't code that's here to stay, make it go away.

Message-ID: <20230920-keine-eile-c9755b5825db@brauner>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-09-20 18:05:31 +02:00
Linus Torvalds
3fde3003ca Regression and bug fixes for ext4.
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmUGh1YACgkQ8vlZVpUN
 gaN9lQgAqmMWu3xLwOERgVbK3CYT8WMcv0m9/by+vSwghCoPVDWWENgEgAzo4YpK
 Lsp4q62wHaWs6AzvJEaJ8ryedo7e4FUHxcvp2f6dCuOPadOEZZZTa4G5fAr0kYXS
 TIoaFtv6F2QVnGU6Y5lhtfYzmgLRdLL0B6MfSTYGO2MSREqxapvfxyGBQdkOuXfO
 UEtrUUEqQ2GdDcKp+FRRnaUvNaTPEESY8d5eVwrMmyUhQWUQL/N2BPbFkk1TP6RG
 MLDNsUZpdhZvLs6qLuR7dvO5wa2fshvRJIXlPINM0R0as5LmHqVL/ifCNkCn4W+k
 ZNvdSPhqew68KHHq3sYFtm9rbZ3YOA==
 =DopS
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Regression and bug fixes for ext4"

* tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix rec_len verify error
  ext4: do not let fstrim block system suspend
  ext4: move setting of trimmed bit into ext4_try_to_trim_range()
  jbd2: Fix memory leak in journal_init_common()
  jbd2: Remove page size assumptions
  buffer: Make bh_offset() work for compound pages
2023-09-17 10:33:53 -07:00
Shida Zhang
7fda67e8c3 ext4: fix rec_len verify error
With the configuration PAGE_SIZE 64k and filesystem blocksize 64k,
a problem occurred when more than 13 million files were directly created
under a directory:

EXT4-fs error (device xx): ext4_dx_csum_set:492: inode #xxxx: comm xxxxx: dir seems corrupt?  Run e2fsck -D.
EXT4-fs error (device xx): ext4_dx_csum_verify:463: inode #xxxx: comm xxxxx: dir seems corrupt?  Run e2fsck -D.
EXT4-fs error (device xx): dx_probe:856: inode #xxxx: block 8188: comm xxxxx: Directory index failed checksum

When enough files are created, the fake_dirent->reclen will be 0xffff.
it doesn't equal to the blocksize 65536, i.e. 0x10000.

But it is not the same condition when blocksize equals to 4k.
when enough files are created, the fake_dirent->reclen will be 0x1000.
it equals to the blocksize 4k, i.e. 0x1000.

The problem seems to be related to the limitation of the 16-bit field
when the blocksize is set to 64k.
To address this, helpers like ext4_rec_len_{from,to}_disk has already
been introduced to complete the conversion between the encoded and the
plain form of rec_len.

So fix this one by using the helper, and all the other in this file too.

Cc: stable@kernel.org
Fixes: dbe8944404 ("ext4: Calculate and verify checksums for htree nodes")
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20230803060938.1929759-1-zhangshida@kylinos.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-09-14 12:07:07 -04:00
Jan Kara
5229a658f6 ext4: do not let fstrim block system suspend
Len Brown has reported that system suspend sometimes fail due to
inability to freeze a task working in ext4_trim_fs() for one minute.
Trimming a large filesystem on a disk that slowly processes discard
requests can indeed take a long time. Since discard is just an advisory
call, it is perfectly fine to interrupt it at any time and the return
number of discarded blocks until that moment. Do that when we detect the
task is being frozen.

Cc: stable@kernel.org
Reported-by: Len Brown <lenb@kernel.org>
Suggested-by: Dave Chinner <david@fromorbit.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=216322
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230913150504.9054-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-09-14 12:06:59 -04:00
Jan Kara
45e4ab320c ext4: move setting of trimmed bit into ext4_try_to_trim_range()
Currently we set the group's trimmed bit in ext4_trim_all_free() based
on return value of ext4_try_to_trim_range(). However when we will want
to abort trimming because of suspend attempt, we want to return success
from ext4_try_to_trim_range() but not set the trimmed bit. Instead
implementing awkward propagation of this information, just move setting
of trimmed bit into ext4_try_to_trim_range() when the whole group is
trimmed.

Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230913150504.9054-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-09-14 12:06:47 -04:00
Linus Torvalds
3ef96fcfd5 Many ext4 and jbd2 cleanups and bug fixes for v6.6-rc1.
* Cleanups in the ext4 remount code when going to and from read-only
   * Cleanups in ext4's multiblock allocator
   * Cleanups in the jbd2 setup/mounting code paths
   * Performance improvements when appending to a delayed allocation file
   * Miscenallenous syzbot and other bug fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmTwqUMACgkQ8vlZVpUN
 gaMqgwf6Aui6MlrtNJx6CrJt4dxLANQ8G6bsJ2Zr+6QNS1X/GAUrCCyLWWom1dfb
 OJ/n4/JUCNc9v5yLCTqHOE5ZFTdQItOBJUKXbJYff8EdnR+zCUULpj6bPbEs5BKp
 U7CiiZ9TIi9S2TWezvIJKIa2VxgPej7CH/HOt8ISh/Msq8nHvcEEJIyOEvVk9odQ
 LEkiQCsikWaljB7qEOIYo+xgFffMZfttc4zuTkdr/h1I6OWhvQYmlwSnTuAiE7BS
 BVf3ebD2Dg8TChUMXOsk2d743iZNWf/+yTfbXVu93/uEM9vgF0+HO6EerTK8RMeM
 yxhshg9z7ccuFjdY/2NYDXe6pEuDKw==
 =cMIX
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Many ext4 and jbd2 cleanups and bug fixes:

   - Cleanups in the ext4 remount code when going to and from read-only

   - Cleanups in ext4's multiblock allocator

   - Cleanups in the jbd2 setup/mounting code paths

   - Performance improvements when appending to a delayed allocation file

   - Miscellaneous syzbot and other bug fixes"

* tag 'ext4_for_linus-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (60 commits)
  ext4: fix slab-use-after-free in ext4_es_insert_extent()
  libfs: remove redundant checks of s_encoding
  ext4: remove redundant checks of s_encoding
  ext4: reject casefold inode flag without casefold feature
  ext4: use LIST_HEAD() to initialize the list_head in mballoc.c
  ext4: do not mark inode dirty every time when appending using delalloc
  ext4: rename s_error_work to s_sb_upd_work
  ext4: add periodic superblock update check
  ext4: drop dio overwrite only flag and associated warning
  ext4: add correct group descriptors and reserved GDT blocks to system zone
  ext4: remove unused function declaration
  ext4: mballoc: avoid garbage value from err
  ext4: use sbi instead of EXT4_SB(sb) in ext4_mb_new_blocks_simple()
  ext4: change the type of blocksize in ext4_mb_init_cache()
  ext4: fix unttached inode after power cut with orphan file feature enabled
  jbd2: correct the end of the journal recovery scan range
  ext4: ext4_get_{dev}_journal return proper error value
  ext4: cleanup ext4_get_dev_journal() and ext4_get_journal()
  jbd2: jbd2_journal_init_{dev,inode} return proper error return value
  jbd2: drop useless error tag in jbd2_journal_wipe()
  ...
2023-08-31 15:18:15 -07:00
Linus Torvalds
3d3dfeb3ae for-6.6/block-2023-08-28
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmTs08EQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpqa4EACu/zKE+omGXBV0Q7kEpVsChjp0ElGtSDIJ
 tJfTuvnWqQjrqRv4ksmZvGdx8SkqFuXri4/7oBXlsaqeUVbIQdWJUpLErBye6nxa
 lUb6nXOFWwyG94cMRYs71lN0loosjb7aiVw7oVLAIhntq3p3doFl/cyy3ndMZrUE
 pZbsrWSt4QiOKhcO0TtIjfAwsr31AN51qFiNNITEiZl3UjXfkGRCK81X0yM2N8zZ
 7Y0h1ldPBsZ/olNWeRyaW1uB64nKM0buR7/nDxCV/NI05nndJ34bIgo/JIj4xy0v
 SiBj2+y86+oMJZt17yYENwOQdtX3hbyESGuVm9dCrO0t9/byVQxkUk0OMm65BM/l
 l2d+gmMQZTbHziqfLlgq9i3i9+B4C2hsb7iBpuo7SW/FPbM45POgi3lpiZycaZyu
 krQo1qwL4KSGXzGN9CabEuKDcJcXqLxqMDOyEDA3R5Kz06V9tNuM+Di/mr4vuZHK
 sVHUfHuWBO9ionLlGPdc3fH/CuMqic8SHjumiAm2menBZV6cSzRDxpm6H4CyLt7y
 tWmw7BNU7dfHFGd+Jw0Ld49sAuEybszEXq6qYv5uYBVfJNqDvOvEeVoQp0RN2jJA
 AG30hymcZgxn9n7gkIgkPQDgIGUjnzUR8B2mE2UFU1CYVHXYXAXU55CCI5oeTkbs
 d0Y/zCZf1A==
 =p1bd
 -----END PGP SIGNATURE-----

Merge tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:
 "Pretty quiet round for this release. This contains:

   - Add support for zoned storage to ublk (Andreas, Ming)

   - Series improving performance for drivers that mark themselves as
     needing a blocking context for issue (Bart)

   - Cleanup the flush logic (Chengming)

   - sed opal keyring support (Greg)

   - Fixes and improvements to the integrity support (Jinyoung)

   - Add some exports for bcachefs that we can hopefully delete again in
     the future (Kent)

   - deadline throttling fix (Zhiguo)

   - Series allowing building the kernel without buffer_head support
     (Christoph)

   - Sanitize the bio page adding flow (Christoph)

   - Write back cache fixes (Christoph)

   - MD updates via Song:
      - Fix perf regression for raid0 large sequential writes (Jan)
      - Fix split bio iostat for raid0 (David)
      - Various raid1 fixes (Heinz, Xueshi)
      - raid6test build fixes (WANG)
      - Deprecate bitmap file support (Christoph)
      - Fix deadlock with md sync thread (Yu)
      - Refactor md io accounting (Yu)
      - Various non-urgent fixes (Li, Yu, Jack)

   - Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li,
     Ming, Nitesh, Ruan, Tejun, Thomas, Xu)"

* tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits)
  block: use strscpy() to instead of strncpy()
  block: sed-opal: keyring support for SED keys
  block: sed-opal: Implement IOC_OPAL_REVERT_LSP
  block: sed-opal: Implement IOC_OPAL_DISCOVERY
  blk-mq: prealloc tags when increase tagset nr_hw_queues
  blk-mq: delete redundant tagset map update when fallback
  blk-mq: fix tags leak when shrink nr_hw_queues
  ublk: zoned: support REQ_OP_ZONE_RESET_ALL
  md: raid0: account for split bio in iostat accounting
  md/raid0: Fix performance regression for large sequential writes
  md/raid0: Factor out helper for mapping and submitting a bio
  md raid1: allow writebehind to work on any leg device set WriteMostly
  md/raid1: hold the barrier until handle_read_error() finishes
  md/raid1: free the r1bio before waiting for blocked rdev
  md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io()
  blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
  drivers/rnbd: restore sysfs interface to rnbd-client
  md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()
  raid6: test: only check for Altivec if building on powerpc hosts
  raid6: test: make sure all intermediate and artifact files are .gitignored
  ...
2023-08-29 20:21:42 -07:00
Linus Torvalds
b96a3e9142 - Some swap cleanups from Ma Wupeng ("fix WARN_ON in add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
   reduces the special-case code for handling hugetlb pages in GUP.  It
   also speeds up GUP handling of transparent hugepages.
 
 - Peng Zhang provides some maple tree speedups ("Optimize the fast path
   of mas_store()").
 
 - Sergey Senozhatsky has improved te performance of zsmalloc during
   compaction (zsmalloc: small compaction improvements").
 
 - Domenico Cerasuolo has developed additional selftest code for zswap
   ("selftests: cgroup: add zswap test program").
 
 - xu xin has doe some work on KSM's handling of zero pages.  These
   changes are mainly to enable the user to better understand the
   effectiveness of KSM's treatment of zero pages ("ksm: support tracking
   KSM-placed zero-pages").
 
 - Jeff Xu has fixes the behaviour of memfd's
   MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
   MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
 
 - David Howells has fixed an fscache optimization ("mm, netfs, fscache:
   Stop read optimisation when folio removed from pagecache").
 
 - Axel Rasmussen has given userfaultfd the ability to simulate memory
   poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
 
 - Miaohe Lin has contributed some routine maintenance work on the
   memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
   check").
 
 - Peng Zhang has contributed some maintenance work on the maple tree
   code ("Improve the validation for maple tree and some cleanup").
 
 - Hugh Dickins has optimized the collapsing of shmem or file pages into
   THPs ("mm: free retracted page table by RCU").
 
 - Jiaqi Yan has a patch series which permits us to use the healthy
   subpages within a hardware poisoned huge page for general purposes
   ("Improve hugetlbfs read on HWPOISON hugepages").
 
 - Kemeng Shi has done some maintenance work on the pagetable-check code
   ("Remove unused parameters in page_table_check").
 
 - More folioification work from Matthew Wilcox ("More filesystem folio
   conversions for 6.6"), ("Followup folio conversions for zswap").  And
   from ZhangPeng ("Convert several functions in page_io.c to use a
   folio").
 
 - page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
 
 - Baoquan He has converted some architectures to use the GENERIC_IOREMAP
   ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
   GENERIC_IOREMAP way").
 
 - Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
   batched/deferred tlb shootdown during page reclamation/migration").
 
 - Better maple tree lockdep checking from Liam Howlett ("More strict
   maple tree lockdep").  Liam also developed some efficiency improvements
   ("Reduce preallocations for maple tree").
 
 - Cleanup and optimization to the secondary IOMMU TLB invalidation, from
   Alistair Popple ("Invalidate secondary IOMMU TLB on permission
   upgrade").
 
 - Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
   for arm64").
 
 - Kemeng Shi provides some maintenance work on the compaction code ("Two
   minor cleanups for compaction").
 
 - Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
   file-backed faults under the VMA lock").
 
 - Aneesh Kumar contributes code to use the vmemmap optimization for DAX
   on ppc64, under some circumstances ("Add support for DAX vmemmap
   optimization for ppc64").
 
 - page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
   data in page_ext"), ("minor cleanups to page_ext header").
 
 - Some zswap cleanups from Johannes Weiner ("mm: zswap: three
   cleanups").
 
 - kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
 
 - VMA handling cleanups from Kefeng Wang ("mm: convert to
   vma_is_initial_heap/stack()").
 
 - DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
   implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
   address ranges and DAMON monitoring targets").
 
 - Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
 
 - Liam Howlett has improved the maple tree node replacement code
   ("maple_tree: Change replacement strategy").
 
 - ZhangPeng has a general code cleanup - use the K() macro more widely
   ("cleanup with helper macro K()").
 
 - Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
   on memory feature on ppc64").
 
 - pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
   in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
 
 - Vishal Moola introduces a memory descriptor for page table tracking,
   "struct ptdesc" ("Split ptdesc from struct page").
 
 - memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
   for vm.memfd_noexec").
 
 - MM include file rationalization from Hugh Dickins ("arch: include
   asm/cacheflush.h in asm/hugetlb.h").
 
 - THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
   output").
 
 - kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
   object_cache instead of kmemleak_initialized").
 
 - More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
   and _folio_order").
 
 - A VMA locking scalability improvement from Suren Baghdasaryan
   ("Per-VMA lock support for swap and userfaults").
 
 - pagetable handling cleanups from Matthew Wilcox ("New page table range
   API").
 
 - A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
   using page->private on tail pages for THP_SWAP + cleanups").
 
 - Cleanups and speedups to the hugetlb fault handling from Matthew
   Wilcox ("Change calling convention for ->huge_fault").
 
 - Matthew Wilcox has also done some maintenance work on the MM subsystem
   documentation ("Improve mm documentation").
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
 jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
 Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
 =Afws
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - Some swap cleanups from Ma Wupeng ("fix WARN_ON in
   add_to_avail_list")

 - Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
   reduces the special-case code for handling hugetlb pages in GUP. It
   also speeds up GUP handling of transparent hugepages.

 - Peng Zhang provides some maple tree speedups ("Optimize the fast path
   of mas_store()").

 - Sergey Senozhatsky has improved te performance of zsmalloc during
   compaction (zsmalloc: small compaction improvements").

 - Domenico Cerasuolo has developed additional selftest code for zswap
   ("selftests: cgroup: add zswap test program").

 - xu xin has doe some work on KSM's handling of zero pages. These
   changes are mainly to enable the user to better understand the
   effectiveness of KSM's treatment of zero pages ("ksm: support
   tracking KSM-placed zero-pages").

 - Jeff Xu has fixes the behaviour of memfd's
   MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
   MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").

 - David Howells has fixed an fscache optimization ("mm, netfs, fscache:
   Stop read optimisation when folio removed from pagecache").

 - Axel Rasmussen has given userfaultfd the ability to simulate memory
   poisoning ("add UFFDIO_POISON to simulate memory poisoning with
   UFFD").

 - Miaohe Lin has contributed some routine maintenance work on the
   memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
   check").

 - Peng Zhang has contributed some maintenance work on the maple tree
   code ("Improve the validation for maple tree and some cleanup").

 - Hugh Dickins has optimized the collapsing of shmem or file pages into
   THPs ("mm: free retracted page table by RCU").

 - Jiaqi Yan has a patch series which permits us to use the healthy
   subpages within a hardware poisoned huge page for general purposes
   ("Improve hugetlbfs read on HWPOISON hugepages").

 - Kemeng Shi has done some maintenance work on the pagetable-check code
   ("Remove unused parameters in page_table_check").

 - More folioification work from Matthew Wilcox ("More filesystem folio
   conversions for 6.6"), ("Followup folio conversions for zswap"). And
   from ZhangPeng ("Convert several functions in page_io.c to use a
   folio").

 - page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").

 - Baoquan He has converted some architectures to use the
   GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
   architectures to take GENERIC_IOREMAP way").

 - Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
   batched/deferred tlb shootdown during page reclamation/migration").

 - Better maple tree lockdep checking from Liam Howlett ("More strict
   maple tree lockdep"). Liam also developed some efficiency
   improvements ("Reduce preallocations for maple tree").

 - Cleanup and optimization to the secondary IOMMU TLB invalidation,
   from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
   upgrade").

 - Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
   for arm64").

 - Kemeng Shi provides some maintenance work on the compaction code
   ("Two minor cleanups for compaction").

 - Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
   most file-backed faults under the VMA lock").

 - Aneesh Kumar contributes code to use the vmemmap optimization for DAX
   on ppc64, under some circumstances ("Add support for DAX vmemmap
   optimization for ppc64").

 - page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
   data in page_ext"), ("minor cleanups to page_ext header").

 - Some zswap cleanups from Johannes Weiner ("mm: zswap: three
   cleanups").

 - kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").

 - VMA handling cleanups from Kefeng Wang ("mm: convert to
   vma_is_initial_heap/stack()").

 - DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
   implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
   address ranges and DAMON monitoring targets").

 - Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").

 - Liam Howlett has improved the maple tree node replacement code
   ("maple_tree: Change replacement strategy").

 - ZhangPeng has a general code cleanup - use the K() macro more widely
   ("cleanup with helper macro K()").

 - Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
   memmap on memory feature on ppc64").

 - pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
   in page_alloc"), ("Two minor cleanups for get pageblock
   migratetype").

 - Vishal Moola introduces a memory descriptor for page table tracking,
   "struct ptdesc" ("Split ptdesc from struct page").

 - memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
   for vm.memfd_noexec").

 - MM include file rationalization from Hugh Dickins ("arch: include
   asm/cacheflush.h in asm/hugetlb.h").

 - THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
   output").

 - kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
   object_cache instead of kmemleak_initialized").

 - More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
   and _folio_order").

 - A VMA locking scalability improvement from Suren Baghdasaryan
   ("Per-VMA lock support for swap and userfaults").

 - pagetable handling cleanups from Matthew Wilcox ("New page table
   range API").

 - A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
   using page->private on tail pages for THP_SWAP + cleanups").

 - Cleanups and speedups to the hugetlb fault handling from Matthew
   Wilcox ("Change calling convention for ->huge_fault").

 - Matthew Wilcox has also done some maintenance work on the MM
   subsystem documentation ("Improve mm documentation").

* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
  maple_tree: shrink struct maple_tree
  maple_tree: clean up mas_wr_append()
  secretmem: convert page_is_secretmem() to folio_is_secretmem()
  nios2: fix flush_dcache_page() for usage from irq context
  hugetlb: add documentation for vma_kernel_pagesize()
  mm: add orphaned kernel-doc to the rst files.
  mm: fix clean_record_shared_mapping_range kernel-doc
  mm: fix get_mctgt_type() kernel-doc
  mm: fix kernel-doc warning from tlb_flush_rmaps()
  mm: remove enum page_entry_size
  mm: allow ->huge_fault() to be called without the mmap_lock held
  mm: move PMD_ORDER to pgtable.h
  mm: remove checks for pte_index
  memcg: remove duplication detection for mem_cgroup_uncharge_swap
  mm/huge_memory: work on folio->swap instead of page->private when splitting folio
  mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
  mm/swap: use dedicated entry for swap in folio
  mm/swap: stop using page->private on tail pages for THP_SWAP
  selftests/mm: fix WARNING comparing pointer to 0
  selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
  ...
2023-08-29 14:25:26 -07:00
Linus Torvalds
511fb5bafe v6.6-vfs.super
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXpbgAKCRCRxhvAZXjc
 oi8PAQCtXelGZHmTcmevsO8p4Qz7hFpkonZ/TnxKf+RdnlNgPgD+NWi+LoRBpaAj
 xk4z8SqJaTTP4WXrG5JZ6o7EQkUL8gE=
 =2e9I
 -----END PGP SIGNATURE-----

Merge tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull superblock updates from Christian Brauner:
 "This contains the super rework that was ready for this cycle. The
  first part changes the order of how we open block devices and allocate
  superblocks, contains various cleanups, simplifications, and a new
  mechanism to wait on superblock state changes.

  This unblocks work to ultimately limit the number of writers to a
  block device. Jan has already scheduled follow-up work that will be
  ready for v6.7 and allows us to restrict the number of writers to a
  given block device. That series builds on this work right here.

  The second part contains filesystem freezing updates.

  Overview:

  The generic superblock changes are rougly organized as follows
  (ignoring additional minor cleanups):

   (1) Removal of the bd_super member from struct block_device.

       This was a very odd back pointer to struct super_block with
       unclear rules. For all relevant places we have other means to get
       the same information so just get rid of this.

   (2) Simplify rules for superblock cleanup.

       Roughly, everything that is allocated during fs_context
       initialization and that's stored in fs_context->s_fs_info needs
       to be cleaned up by the fs_context->free() implementation before
       the superblock allocation function has been called successfully.

       After sget_fc() returned fs_context->s_fs_info has been
       transferred to sb->s_fs_info at which point sb->kill_sb() if
       fully responsible for cleanup. Adhering to these rules means that
       cleanup of sb->s_fs_info in fill_super() is to be avoided as it's
       brittle and inconsistent.

       Cleanup shouldn't be duplicated between sb->put_super() as
       sb->put_super() is only called if sb->s_root has been set aka
       when the filesystem has been successfully born (SB_BORN). That
       complexity should be avoided.

       This also means that block devices are to be closed in
       sb->kill_sb() instead of sb->put_super(). More details in the
       lower section.

   (3) Make it possible to lookup or create a superblock before opening
       block devices

       There's a subtle dependency on (2) as some filesystems did rely
       on fill_super() to be called in order to correctly clean up
       sb->s_fs_info. All these filesystems have been fixed.

   (4) Switch most filesystem to follow the same logic as the generic
       mount code now does as outlined in (3).

   (5) Use the superblock as the holder of the block device. We can now
       easily go back from block device to owning superblock.

   (6) Export and extend the generic fs_holder_ops and use them as
       holder ops everywhere and remove the filesystem specific holder
       ops.

   (7) Call from the block layer up into the filesystem layer when the
       block device is removed, allowing to shut down the filesystem
       without risk of deadlocks.

   (8) Get rid of get_super().

       We can now easily go back from the block device to owning
       superblock and can call up from the block layer into the
       filesystem layer when the device is removed. So no need to wade
       through all registered superblock to find the owning superblock
       anymore"

Link: https://lore.kernel.org/lkml/20230824-prall-intakt-95dbffdee4a0@brauner/

* tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (47 commits)
  super: use higher-level helper for {freeze,thaw}
  super: wait until we passed kill super
  super: wait for nascent superblocks
  super: make locking naming consistent
  super: use locking helpers
  fs: simplify invalidate_inodes
  fs: remove get_super
  block: call into the file system for ioctl BLKFLSBUF
  block: call into the file system for bdev_mark_dead
  block: consolidate __invalidate_device and fsync_bdev
  block: drop the "busy inodes on changed media" log message
  dasd: also call __invalidate_device when setting the device offline
  amiflop: don't call fsync_bdev in FDFMTBEG
  floppy: call disk_force_media_change when changing the format
  block: simplify the disk_force_media_change interface
  nbd: call blk_mark_disk_dead in nbd_clear_sock_ioctl
  xfs use fs_holder_ops for the log and RT devices
  xfs: drop s_umount over opening the log and RT devices
  ext4: use fs_holder_ops for the log device
  ext4: drop s_umount over opening the log device
  ...
2023-08-28 11:04:18 -07:00
Linus Torvalds
615e95831e v6.6-vfs.ctime
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXTKAAKCRCRxhvAZXjc
 oifJAQCzi/p+AdQu8LA/0XvR7fTwaq64ZDCibU4BISuLGT2kEgEAuGbuoFZa0rs2
 XYD/s4+gi64p9Z01MmXm2XO1pu3GPg0=
 =eJz5
 -----END PGP SIGNATURE-----

Merge tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull vfs timestamp updates from Christian Brauner:
 "This adds VFS support for multi-grain timestamps and converts tmpfs,
  xfs, ext4, and btrfs to use them. This carries acks from all relevant
  filesystems.

  The VFS always uses coarse-grained timestamps when updating the ctime
  and mtime after a change. This has the benefit of allowing filesystems
  to optimize away a lot of metadata updates, down to around 1 per
  jiffy, even when a file is under heavy writes.

  Unfortunately, this has always been an issue when we're exporting via
  NFSv3, which relies on timestamps to validate caches. A lot of changes
  can happen in a jiffy, so timestamps aren't sufficient to help the
  client decide to invalidate the cache.

  Even with NFSv4, a lot of exported filesystems don't properly support
  a change attribute and are subject to the same problems with timestamp
  granularity. Other applications have similar issues with timestamps
  (e.g., backup applications).

  If we were to always use fine-grained timestamps, that would improve
  the situation, but that becomes rather expensive, as the underlying
  filesystem would have to log a lot more metadata updates.

  This introduces fine-grained timestamps that are used when they are
  actively queried.

  This uses the 31st bit of the ctime tv_nsec field to indicate that
  something has queried the inode for the mtime or ctime. When this flag
  is set, on the next mtime or ctime update, the kernel will fetch a
  fine-grained timestamp instead of the usual coarse-grained one.

  As POSIX generally mandates that when the mtime changes, the ctime
  must also change the kernel always stores normalized ctime values, so
  only the first 30 bits of the tv_nsec field are ever used.

  Filesytems can opt into this behavior by setting the FS_MGTIME flag in
  the fstype. Filesystems that don't set this flag will continue to use
  coarse-grained timestamps.

  Various preparatory changes, fixes and cleanups are included:

   - Fixup all relevant places where POSIX requires updating ctime
     together with mtime. This is a wide-range of places and all
     maintainers provided necessary Acks.

   - Add new accessors for inode->i_ctime directly and change all
     callers to rely on them. Plain accesses to inode->i_ctime are now
     gone and it is accordingly rename to inode->__i_ctime and commented
     as requiring accessors.

   - Extend generic_fillattr() to pass in a request mask mirroring in a
     sense the statx() uapi. This allows callers to pass in a request
     mask to only get a subset of attributes filled in.

   - Rework timestamp updates so it's possible to drop the @now
     parameter the update_time() inode operation and associated helpers.

   - Add inode_update_timestamps() and convert all filesystems to it
     removing a bunch of open-coding"

* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
  btrfs: convert to multigrain timestamps
  ext4: switch to multigrain timestamps
  xfs: switch to multigrain timestamps
  tmpfs: add support for multigrain timestamps
  fs: add infrastructure for multigrain timestamps
  fs: drop the timespec64 argument from update_time
  xfs: have xfs_vn_update_time gets its own timestamp
  fat: make fat_update_time get its own timestamp
  fat: remove i_version handling from fat_update_time
  ubifs: have ubifs_update_time use inode_update_timestamps
  btrfs: have it use inode_update_timestamps
  fs: drop the timespec64 arg from generic_update_time
  fs: pass the request_mask to generic_fillattr
  fs: remove silly warning from current_time
  gfs2: fix timestamp handling on quota inodes
  fs: rename i_ctime field to __i_ctime
  selinux: convert to ctime accessor functions
  security: convert to ctime accessor functions
  apparmor: convert to ctime accessor functions
  sunrpc: convert to ctime accessor functions
  ...
2023-08-28 09:31:32 -07:00
Baokun Li
768d612f79 ext4: fix slab-use-after-free in ext4_es_insert_extent()
Yikebaer reported an issue:
==================================================================
BUG: KASAN: slab-use-after-free in ext4_es_insert_extent+0xc68/0xcb0
fs/ext4/extents_status.c:894
Read of size 4 at addr ffff888112ecc1a4 by task syz-executor/8438

CPU: 1 PID: 8438 Comm: syz-executor Not tainted 6.5.0-rc5 
Call Trace:
 [...]
 kasan_report+0xba/0xf0 mm/kasan/report.c:588
 ext4_es_insert_extent+0xc68/0xcb0 fs/ext4/extents_status.c:894
 ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680
 ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462
 ext4_zero_range fs/ext4/extents.c:4622 [inline]
 ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721
 [...]

Allocated by task 8438:
 [...]
 kmem_cache_zalloc include/linux/slab.h:693 [inline]
 __es_alloc_extent fs/ext4/extents_status.c:469 [inline]
 ext4_es_insert_extent+0x672/0xcb0 fs/ext4/extents_status.c:873
 ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680
 ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462
 ext4_zero_range fs/ext4/extents.c:4622 [inline]
 ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721
 [...]

Freed by task 8438:
 [...]
 kmem_cache_free+0xec/0x490 mm/slub.c:3823
 ext4_es_try_to_merge_right fs/ext4/extents_status.c:593 [inline]
 __es_insert_extent+0x9f4/0x1440 fs/ext4/extents_status.c:802
 ext4_es_insert_extent+0x2ca/0xcb0 fs/ext4/extents_status.c:882
 ext4_map_blocks+0x92a/0x16f0 fs/ext4/inode.c:680
 ext4_alloc_file_blocks.isra.0+0x2df/0xb70 fs/ext4/extents.c:4462
 ext4_zero_range fs/ext4/extents.c:4622 [inline]
 ext4_fallocate+0x251c/0x3ce0 fs/ext4/extents.c:4721
 [...]
==================================================================

The flow of issue triggering is as follows:
1. remove es
      raw es               es  removed  es1
|-------------------| -> |----|.......|------|

2. insert es
  es   insert   es1      merge with es  es1     merge with es and free es1
|----|.......|------| -> |------------|------| -> |-------------------|

es merges with newes, then merges with es1, frees es1, then determines
if es1->es_len is 0 and triggers a UAF.

The code flow is as follows:
ext4_es_insert_extent
  es1 = __es_alloc_extent(true);
  es2 = __es_alloc_extent(true);
  __es_remove_extent(inode, lblk, end, NULL, es1)
    __es_insert_extent(inode, &newes, es1) ---> insert es1 to es tree
  __es_insert_extent(inode, &newes, es2)
    ext4_es_try_to_merge_right
      ext4_es_free_extent(inode, es1) --->  es1 is freed
  if (es1 && !es1->es_len)
    // Trigger UAF by determining if es1 is used.

We determine whether es1 or es2 is used immediately after calling
__es_remove_extent() or __es_insert_extent() to avoid triggering a
UAF if es1 or es2 is freed.

Reported-by: Yikebaer Aizezi <yikebaer61@gmail.com>
Closes: https://lore.kernel.org/lkml/CALcu4raD4h9coiyEBL4Bm0zjDwxC2CyPiTwsP3zFuhot6y9Beg@mail.gmail.com
Fixes: 2a69c45008 ("ext4: using nofail preallocation in ext4_es_insert_extent()")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230815070808.3377171-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:13 -04:00
Eric Biggers
b814279395 ext4: remove redundant checks of s_encoding
Now that ext4 does not allow inodes with the casefold flag to be
instantiated when unsupported, it's unnecessary to repeatedly check for
support later on during random filesystem operations.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230814182903.37267-3-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:13 -04:00
Eric Biggers
8216776ccf ext4: reject casefold inode flag without casefold feature
It is invalid for the casefold inode flag to be set without the casefold
superblock feature flag also being set.  e2fsck already considers this
case to be invalid and handles it by offering to clear the casefold flag
on the inode.  __ext4_iget() also already considered this to be invalid,
sort of, but it only got so far as logging an error message; it didn't
actually reject the inode.  Make it reject the inode so that other code
doesn't have to handle this case.  This matches what f2fs does.

Note: we could check 's_encoding != NULL' instead of
ext4_has_feature_casefold().  This would make the check robust against
the casefold feature being enabled by userspace writing to the page
cache of the mounted block device.  However, it's unsolvable in general
for filesystems to be robust against concurrent writes to the page cache
of the mounted block device.  Though this very particular scenario
involving the casefold feature is solvable, we should not pretend that
we can support this model, so let's just check the casefold feature.
tune2fs already forbids enabling casefold on a mounted filesystem.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230814182903.37267-2-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:13 -04:00
Ruan Jinjie
0f6bc57971 ext4: use LIST_HEAD() to initialize the list_head in mballoc.c
Use LIST_HEAD() to initialize the list_head instead of open-coding it.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230812071839.3481909-1-ruanjinjie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:13 -04:00
Liu Song
03de20bed2 ext4: do not mark inode dirty every time when appending using delalloc
In the delalloc append write scenario, if inode's i_size is extended due
to buffer write, there are delalloc writes pending in the range up to
i_size, and no need to touch i_disksize since writeback will push
i_disksize up to i_size eventually. Offers significant performance
improvement in high-frequency append write scenarios.

I conducted tests in my 32-core environment by launching 32 concurrent
threads to append write to the same file. Each write operation had a
length of 1024 bytes and was repeated 100000 times. Without using this
patch, the test was completed in 7705 ms. However, with this patch, the
test was completed in 5066 ms, resulting in a performance improvement of
34%.

Moreover, in test scenarios of Kafka version 2.6.2, using packet size of
2K, with this patch resulted in a 10% performance improvement.

Signed-off-by: Liu Song <liusong@linux.alibaba.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230810154333.84921-1-liusong@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:13 -04:00
Theodore Ts'o
bb15cea20f ext4: rename s_error_work to s_sb_upd_work
The most common use that s_error_work will get scheduled is now the
periodic update of the superblock.  So rename it to s_sb_upd_work.

Also rename the function flush_stashed_error_work() to
update_super_work().

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Vitaliy Kuznetsov
ff0722de89 ext4: add periodic superblock update check
This patch introduces a mechanism to periodically check and update
the superblock within the ext4 file system. The main purpose of this
patch is to keep the disk superblock up to date. The update will be
performed if more than one hour has passed since the last update, and
if more than 16MB of data have been written to disk.

This check and update is performed within the ext4_journal_commit_callback
function, ensuring that the superblock is written while the disk is
active, rather than based on a timer that may trigger during disk idle
periods.

Discussion https://www.spinics.net/lists/linux-ext4/msg85865.html

Signed-off-by: Vitaliy Kuznetsov <vk.en.mail@gmail.com>
Link: https://lore.kernel.org/r/20230810143852.40228-1-vk.en.mail@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Brian Foster
194505b55d ext4: drop dio overwrite only flag and associated warning
The commit referenced below opened up concurrent unaligned dio under
shared locking for pure overwrites. In doing so, it enabled use of
the IOMAP_DIO_OVERWRITE_ONLY flag and added a warning on unexpected
-EAGAIN returns as an extra precaution, since ext4 does not retry
writes in such cases. The flag itself is advisory in this case since
ext4 checks for unaligned I/Os and uses appropriate locking up
front, rather than on a retry in response to -EAGAIN.

As it turns out, the warning check is susceptible to false positives
because there are scenarios where -EAGAIN can be expected from lower
layers without necessarily having IOCB_NOWAIT set on the iocb. For
example, one instance of the warning has been seen where io_uring
sets IOCB_HIPRI, which in turn results in REQ_POLLED|REQ_NOWAIT on
the bio. This results in -EAGAIN if the block layer is unable to
allocate a request, etc. [Note that there is an outstanding patch to
untangle REQ_POLLED and REQ_NOWAIT such that the latter relies on
IOCB_NOWAIT, which would also address this instance of the warning.]

Another instance of the warning has been reproduced by syzbot. A dio
write is interrupted down in __get_user_pages_locked() waiting on
the mm lock and returns -EAGAIN up the stack. If the iomap dio
iteration layer has made no progress on the write to this point,
-EAGAIN returns up to the filesystem and triggers the warning.

This use of the overwrite flag in ext4 is precautionary and
half-baked. I.e., ext4 doesn't actually implement overwrite checking
in the iomap callbacks when the flag is set, so the only extra
verification it provides are i_size checks in the generic iomap dio
layer. Combined with the tendency for false positives, the added
verification is not worth the extra trouble. Remove the flag,
associated warning, and update the comments to document when
concurrent unaligned dio writes are allowed and why said flag is not
used.

Cc: stable@kernel.org
Reported-by: syzbot+5050ad0fb47527b1808a@syzkaller.appspotmail.com
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Fixes: 310ee0902b ("ext4: allow concurrent unaligned dio overwrites")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230810165559.946222-1-bfoster@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Wang Jianjian
68228da51c ext4: add correct group descriptors and reserved GDT blocks to system zone
When setup_system_zone, flex_bg is not initialized so it is always 1.
Use a new helper function, ext4_num_base_meta_blocks() which does not
depend on sbi->s_log_groups_per_flex being initialized.

[ Squashed two patches in the Link URL's below together into a single
  commit, which is simpler to review/understand.  Also fix checkpatch
  warnings. --TYT ]

Cc: stable@kernel.org
Signed-off-by: Wang Jianjian <wangjianjian0@foxmail.com>
Link: https://lore.kernel.org/r/tencent_21AF0D446A9916ED5C51492CC6C9A0A77B05@qq.com
Link: https://lore.kernel.org/r/tencent_D744D1450CC169AEA77FCF0A64719909ED05@qq.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Cai Xinchen
b6c7d6dc8a ext4: remove unused function declaration
These functions do not have its function implementation.
So those function declaration is useless. Remove these

Signed-off-by: Cai Xinchen <caixinchen1@huawei.com>
Link: https://lore.kernel.org/r/20230802030025.173148-1-caixinchen1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Su Hui
a50bda1474 ext4: mballoc: avoid garbage value from err
clang's static analysis warning: fs/ext4/mballoc.c
line 4178, column 6, Branch condition evaluates to a garbage value.

err is uninitialized and will be judged when 'len <= 0' or
it first enters the loop while the condition "!ext4_sb_block_valid()"
is true. Although this can't make problems now, it's better to
correct it.

Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230725043310.1227621-1-suhui@nfschina.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Lu Hongfei
79ebf48c44 ext4: use sbi instead of EXT4_SB(sb) in ext4_mb_new_blocks_simple()
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Link: https://lore.kernel.org/r/20230707115907.26637-1-luhongfei@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Lu Hongfei
89cadf6e22 ext4: change the type of blocksize in ext4_mb_init_cache()
The return value type of i_blocksize() is 'unsigned int', so the
type of blocksize has been modified from 'int' to 'unsigned int'
to ensure data type consistency.

Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Link: https://lore.kernel.org/r/20230707105516.9156-1-luhongfei@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Zhihao Cheng
1524773425 ext4: fix unttached inode after power cut with orphan file feature enabled
Running generic/475(filesystem consistent tests after power cut) could
easily trigger unattached inode error while doing fsck:
  Unattached zero-length inode 39405.  Clear? no

  Unattached inode 39405
  Connect to /lost+found? no

Above inconsistence is caused by following process:
       P1                       P2
ext4_create
 inode = ext4_new_inode_start_handle  // itable records nlink=1
 ext4_add_nondir
   err = ext4_add_entry  // ENOSPC
    ext4_append
     ext4_bread
      ext4_getblk
       ext4_map_blocks // returns ENOSPC
   drop_nlink(inode) // won't be updated into disk inode
   ext4_orphan_add(handle, inode)
    ext4_orphan_file_add
 ext4_journal_stop(handle)
		      jbd2_journal_commit_transaction // commit success
              >> power cut <<
ext4_fill_super
 ext4_load_and_init_journal   // itable records nlink=1
 ext4_orphan_cleanup
  ext4_process_orphan
   if (inode->i_nlink)        // true, inode won't be deleted

Then, allocated inode will be reserved on disk and corresponds to no
dentries, so e2fsck reports 'unattached inode' problem.

The problem won't happen if orphan file feature is disabled, because
ext4_orphan_add() will update disk inode in orphan list mode. There
are several places not updating disk inode while putting inode into
orphan area, such as ext4_add_nondir(), ext4_symlink() and whiteout
in ext4_rename(). Fix it by updating inode into disk in all error
branches of these places.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217605
Fixes: 02f310fcf4 ("ext4: Speedup ext4 orphan inode handling")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230628132011.650383-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:27:12 -04:00
Zhang Yi
ee5c807137 ext4: ext4_get_{dev}_journal return proper error value
ext4_get_journal() and ext4_get_dev_journal() return NULL if they failed
to init journal, making them return proper error value instead, also
rename them to ext4_open_{inode,dev}_journal().

[ Folded fix to ext4_calculate_overhead() to check for an ERR_PTR
  instead of NULL. ]

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-13-yi.zhang@huaweicloud.com
Reported-by: syzbot+b3123e6d9842e526de39@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20230826011029.2023140-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-27 11:13:39 -04:00
Matthew Wilcox (Oracle)
1d024e7a8d mm: remove enum page_entry_size
Remove the unnecessary encoding of page order into an enum and pass the
page order directly.  That lets us get rid of pe_order().

The switch constructs have to be changed to if/else constructs to prevent
GCC from warning on builds with 3-level page tables where PMD_ORDER and
PUD_ORDER have the same value.

If you are looking at this commit because your driver stopped compiling,
look at the previous commit as well and audit your driver to be sure it
doesn't depend on mmap_lock being held in its ->huge_fault method.

[willy@infradead.org: use "order %u" to match the (non dev_t) style]
  Link: https://lkml.kernel.org/r/ZOUYekbtTv+n8hYf@casper.infradead.org
Link: https://lkml.kernel.org/r/20230818202335.2739663-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-24 16:20:30 -07:00
Matthew Wilcox (Oracle)
f9bff0e318 minmax: add in_range() macro
Patch series "New page table range API", v6.

This patchset changes the API used by the MM to set up page table entries.
The four APIs are:

    set_ptes(mm, addr, ptep, pte, nr)
    update_mmu_cache_range(vma, addr, ptep, nr)
    flush_dcache_folio(folio) 
    flush_icache_pages(vma, page, nr)

flush_dcache_folio() isn't technically new, but no architecture
implemented it, so I've done that for them.  The old APIs remain around
but are mostly implemented by calling the new interfaces.

The new APIs are based around setting up N page table entries at once. 
The N entries belong to the same PMD, the same folio and the same VMA, so
ptep++ is a legitimate operation, and locking is taken care of for you. 
Some architectures can do a better job of it than just a loop, but I have
hesitated to make too deep a change to architectures I don't understand
well.

One thing I have changed in every architecture is that PG_arch_1 is now a
per-folio bit instead of a per-page bit when used for dcache clean/dirty
tracking.  This was something that would have to happen eventually, and it
makes sense to do it now rather than iterate over every page involved in a
cache flush and figure out if it needs to happen.

The point of all this is better performance, and Fengwei Yin has measured
improvement on x86.  I suspect you'll see improvement on your architecture
too.  Try the new will-it-scale test mentioned here:
https://lore.kernel.org/linux-mm/20230206140639.538867-5-fengwei.yin@intel.com/
You'll need to run it on an XFS filesystem and have
CONFIG_TRANSPARENT_HUGEPAGE set.

This patchset is the basis for much of the anonymous large folio work
being done by Ryan, so it's received quite a lot of testing over the last
few months.


This patch (of 38):

Determine if a value lies within a range more efficiently (subtraction +
comparison vs two comparisons and an AND).  It also has useful (under some
circumstances) behaviour if the range exceeds the maximum value of the
type.  Convert all the conflicting definitions of in_range() within the
kernel; some can use the generic definition while others need their own
definition.

Link: https://lkml.kernel.org/r/20230802151406.3735276-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230802151406.3735276-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-24 16:20:18 -07:00
Zhang Yi
bc74e6a38d ext4: cleanup ext4_get_dev_journal() and ext4_get_journal()
Factor out a new helper form ext4_get_dev_journal() to get external
journal bdev and check validation of this device, drop ext4_blkdev_get()
helper, and also remove duplicate check of journal feature. It makes
ext4_get_dev_journal() more clear than before.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-12-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-23 00:04:20 -04:00
Zhang Yi
8e6cf5fbb7 jbd2: jbd2_journal_init_{dev,inode} return proper error return value
Current jbd2_journal_init_{dev,inode} return NULL if some error
happens, make them to pass out proper error return value.

[ Fix from Yang Yingliang folded in. ]

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230811063610.2980059-11-yi.zhang@huaweicloud.com
Link: https://lore.kernel.org/r/20230822030018.644419-1-yangyingliang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-08-23 00:01:52 -04:00
David Howells
0201ebf274 mm: merge folio_has_private()/filemap_release_folio() call pairs
Patch series "mm, netfs, fscache: Stop read optimisation when folio
removed from pagecache", v7.

This fixes an optimisation in fscache whereby we don't read from the cache
for a particular file until we know that there's data there that we don't
have in the pagecache.  The problem is that I'm no longer using PG_fscache
(aka PG_private_2) to indicate that the page is cached and so I don't get
a notification when a cached page is dropped from the pagecache.

The first patch merges some folio_has_private() and
filemap_release_folio() pairs and introduces a helper,
folio_needs_release(), to indicate if a release is required.

The second patch is the actual fix.  Following Willy's suggestions[1], it
adds an AS_RELEASE_ALWAYS flag to an address_space that will make
filemap_release_folio() always call ->release_folio(), even if
PG_private/PG_private_2 aren't set.  folio_needs_release() is altered to
add a check for this.


This patch (of 2):

Make filemap_release_folio() check folio_has_private().  Then, in most
cases, where a call to folio_has_private() is immediately followed by a
call to filemap_release_folio(), we can get rid of the test in the pair.

There are a couple of sites in mm/vscan.c that this can't so easily be
done.  In shrink_folio_list(), there are actually three cases (something
different is done for incompletely invalidated buffers), but
filemap_release_folio() elides two of them.

In shrink_active_list(), we don't have have the folio lock yet, so the
check allows us to avoid locking the page unnecessarily.

A wrapper function to check if a folio needs release is provided for those
places that still need to do it in the mm/ directory.  This will acquire
additional parts to the condition in a future patch.

After this, the only remaining caller of folio_has_private() outside of
mm/ is a check in fuse.

Link: https://lkml.kernel.org/r/20230628104852.3391651-1-dhowells@redhat.com
Link: https://lkml.kernel.org/r/20230628104852.3391651-2-dhowells@redhat.com
Reported-by: Rohith Surabattula <rohiths.msft@gmail.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steve French <sfrench@samba.org>
Cc: Shyam Prasad N <nspmangalore@gmail.com>
Cc: Rohith Surabattula <rohiths.msft@gmail.com>
Cc: Dave Wysochanski <dwysocha@redhat.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-18 10:12:12 -07:00
Bean Huo
a524fcfe19 fs: convert block_commit_write to return void
block_commit_write() always returns 0, this patch changes it to return
void.

Link: https://lkml.kernel.org/r/20230626055518.842392-3-beanhuo@iokpp.de
Signed-off-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Luís Henriques <ocfs2-devel@oss.oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-18 10:12:07 -07:00
Sidhartha Kumar
87b11f8622 mm: increase usage of folio_next_index() helper
Simplify code pattern of 'folio->index + folio_nr_pages(folio)' by using
the existing helper folio_next_index().

Link: https://lkml.kernel.org/r/20230627174349.491803-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-18 10:12:00 -07:00
Christoph Hellwig
8bed178375 ext4: use fs_holder_ops for the log device
Use the generic fs_holder_ops to shut down the file system when the
log device goes away instead of duplicating the logic.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230802154131.2221419-11-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 13:15:04 +02:00
Christoph Hellwig
6f5fc7de98 ext4: drop s_umount over opening the log device
Just like get_tree_bdev needs to drop s_umount when opening the main
device, we need to do the same for the ext4 log device to avoid a
potential lock order reversal with s_unmount for the mark_dead path.

It might be preferable to just drop s_umount over ->fill_super entirely,
but that will require a fairly massive audit first, so we'll do the easy
version here first.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-10-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 13:15:04 +02:00