The "prot" parameter is unused, and using it instead of what's stored in
that particular PTE would very likely be wrong. Let's simply remove it.
Link: https://lkml.kernel.org/r/20240327143301.741807-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
PageAnonExclusive() used to forbid tail pages for hugetlbfs, as that used
to be called mostly in hugetlb specific paths and the head page was
guaranteed.
As we move forward towards merging hugetlb paths into generic mm, we may
start to pass in tail hugetlb pages (when with cont-pte/cont-pmd huge
pages) for such check. Allow it to properly fetch the head, in which case
the anon-exclusiveness of the head will always represents the tail page.
There's already a sign of it when we look at the GUP-fast which already
contain the hugetlb processing altogether: we used to have a specific
commit 5805192c7b ("mm/gup: handle cont-PTE hugetlb pages correctly in
gup_must_unshare() via GUP-fast") covering that area. Now with this more
generic change, that can also go away.
[akpm@linux-foundation.org: simplify PageAnonExclusive(), per Matthew]
Link: https://lkml.kernel.org/r/Zg3u5Sh9EbbYPhaI@casper.infradead.org
Link: https://lkml.kernel.org/r/20240403013249.1418299-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now follow_page() is ready to handle hugetlb pages in whatever form, and
over all architectures. Switch to the generic code path.
Time to retire hugetlb_follow_page_mask(), following the previous
retirement of follow_hugetlb_page() in 4849807114.
There may be a slight difference of how the loops run when processing slow
GUP over a large hugetlb range on cont_pte/cont_pmd supported archs: each
loop of __get_user_pages() will resolve one pgtable entry with the patch
applied, rather than relying on the size of hugetlb hstate, the latter may
cover multiple entries in one loop.
A quick performance test on an aarch64 VM on M1 chip shows 15% degrade
over a tight loop of slow gup after the path switched. That shouldn't be
a problem because slow-gup should not be a hot path for GUP in general:
when page is commonly present, fast-gup will already succeed, while when
the page is indeed missing and require a follow up page fault, the slow
gup degrade will probably buried in the fault paths anyway. It also
explains why slow gup for THP used to be very slow before 57edfcfd34
("mm/gup: accelerate thp gup even for "pages != NULL"") lands, the latter
not part of a performance analysis but a side benefit. If the performance
will be a concern, we can consider handle CONT_PTE in follow_page().
Before that is justified to be necessary, keep everything clean and simple.
Link: https://lkml.kernel.org/r/20240327152332.950956-14-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hugepd is only used in PowerPC so far on 4K page size kernels where hash
mmu is used. follow_page_mask() used to leverage hugetlb APIs to access
hugepd entries. Teach follow_page_mask() itself on hugepd.
With previous refactors on fast-gup gup_huge_pd(), most of the code can be
leveraged. There's something not needed for follow page, for example,
gup_hugepte() tries to detect pgtable entry change which will never happen
with slow gup (which has the pgtable lock held), but that's not a problem
to check.
Since follow_page() always only fetch one page, set the end to "address +
PAGE_SIZE" should suffice. We will still do the pgtable walk once for
each hugetlb page by setting ctx->page_mask properly.
One thing worth mentioning is that some level of pgtable's _bad() helper
will report is_hugepd() entries as TRUE on Power8 hash MMUs. I think it
at least applies to PUD on Power8 with 4K pgsize. It means feeding a
hugepd entry to pud_bad() will report a false positive. Let's leave that
for now because it can be arch-specific where I am a bit declined to
touch. In this patch it's not a problem as long as hugepd is detected
before any bad pgtable entries.
To allow slow gup like follow_*_page() to access hugepd helpers, hugepd
codes are moved to the top. Besides that, the helper record_subpages()
will be used by either hugepd or fast-gup now. To avoid "unused function"
warnings we must provide a "#ifdef" for it, unfortunately.
Link: https://lkml.kernel.org/r/20240327152332.950956-13-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace pmd_trans_huge() with pmd_leaf() to also cover pmd_huge() as long
as enabled.
FOLL_TOUCH and FOLL_SPLIT_PMD only apply to THP, not yet huge.
Since now follow_trans_huge_pmd() can process hugetlb pages, renaming it
into follow_huge_pmd() to match what it does. Move it into gup.c so not
depend on CONFIG_THP.
When at it, move the ctx->page_mask setup into follow_huge_pmd(), only set
it when the page is valid. It was not a bug to set it before even if GUP
failed (page==NULL), because follow_page_mask() callers always ignores
page_mask if so. But doing so makes the code cleaner.
[peterx@redhat.com: allow follow_pmd_mask() to take hugetlb tail pages]
Link: https://lkml.kernel.org/r/20240403013249.1418299-3-peterx@redhat.com
Link: https://lkml.kernel.org/r/20240327152332.950956-12-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Teach follow_pud_mask() to be able to handle normal PUD pages like
hugetlb.
Rename follow_devmap_pud() to follow_huge_pud() so that it can process
either huge devmap or hugetlb. Move it out of TRANSPARENT_HUGEPAGE_PUD
and and huge_memory.c (which relies on CONFIG_THP). Switch to pud_leaf()
to detect both cases in the slow gup.
In the new follow_huge_pud(), taking care of possible CoR for hugetlb if
necessary. touch_pud() needs to be moved out of huge_memory.c to be
accessable from gup.c even if !THP.
Since at it, optimize the non-present check by adding a pud_present()
early check before taking the pgtable lock, failing the follow_page()
early if PUD is not present: that is required by both devmap or hugetlb.
Use pud_huge() to also cover the pud_devmap() case.
One more trivial thing to mention is, introduce "pud_t pud" in the code
paths along the way, so the code doesn't dereference *pudp multiple time.
Not only because that looks less straightforward, but also because if the
dereference really happened, it's not clear whether there can be race to
see different *pudp values when it's being modified at the same time.
Setting ctx->page_mask properly for a PUD entry. As a side effect, this
patch should also be able to optimize devmap GUP on PUD to be able to jump
over the whole PUD range, but not yet verified. Hugetlb already can do so
prior to this patch.
Link: https://lkml.kernel.org/r/20240327152332.950956-11-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce "pud_t pud" in the function, so the code won't dereference *pudp
multiple time. Not only because that looks less straightforward, but also
because if the dereference really happened, it's not clear whether there
can be race to see different *pudp values if it's being modified at the
same time.
Link: https://lkml.kernel.org/r/20240327152332.950956-10-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: James Houghton <jthoughton@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
no_page_table() is not yet used for hugetlb code paths. Make it prepared.
The major difference here is hugetlb will return -EFAULT as long as page
cache does not exist, even if VM_SHARED. See hugetlb_follow_page_mask().
Pass "address" into no_page_table() too, as hugetlb will need it.
Link: https://lkml.kernel.org/r/20240327152332.950956-9-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All the fast-gup functions take a tail page to operate, always need to do
page mask calculations before feeding that into record_subpages().
Merge that logic into record_subpages(), so that it will do the nth_page()
calculation.
Link: https://lkml.kernel.org/r/20240327152332.950956-8-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hugepd format for GUP is only used in PowerPC with hugetlbfs. There are
some kernel usage of hugepd (can refer to hugepd_populate_kernel() for
PPC_8XX), however those pages are not candidates for GUP.
Commit a6e79df92e ("mm/gup: disallow FOLL_LONGTERM GUP-fast writing to
file-backed mappings") added a check to fail gup-fast if there's potential
risk of violating GUP over writeback file systems. That should never
apply to hugepd. Considering that hugepd is an old format (and even
software-only), there's no plan to extend hugepd into other file typed
memories that is prone to the same issue.
Drop that check, not only because it'll never be true for hugepd per any
known plan, but also it paves way for reusing the function outside
fast-gup.
To make sure we'll still remember this issue just in case hugepd will be
extended to support non-hugetlbfs memories, add a rich comment above
gup_huge_pd(), explaining the issue with proper references.
[akpm@linux-foundation.org: fix comment, per David]
Link: https://lkml.kernel.org/r/20240327152332.950956-7-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce per-vma begin()/end() helpers for pgtable walks. This is a
preparation work to merge hugetlb pgtable walkers with generic mm.
The helpers need to be called before and after a pgtable walk, will start
to be needed if the pgtable walker code supports hugetlb pages. It's a
hook point for any type of VMA, but for now only hugetlb uses it to
stablize the pgtable pages from getting away (due to possible pmd
unsharing).
Link: https://lkml.kernel.org/r/20240327152332.950956-5-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It will be used outside hugetlb.c soon.
Link: https://lkml.kernel.org/r/20240327152332.950956-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/gup: Unify hugetlb, part 2", v4.
The series removes the hugetlb slow gup path after a previous refactor
work [1], so that slow gup now uses the exact same path to process all
kinds of memory including hugetlb.
For the long term, we may want to remove most, if not all, call sites of
huge_pte_offset(). It'll be ideal if that API can be completely dropped
from arch hugetlb API. This series is one small step towards merging
hugetlb specific codes into generic mm paths. From that POV, this series
removes one reference to huge_pte_offset() out of many others.
One goal of such a route is that we can reconsider merging hugetlb
features like High Granularity Mapping (HGM). It was not accepted in the
past because it may add lots of hugetlb specific codes and make the mm
code even harder to maintain. With a merged codeset, features like HGM
can hopefully share some code with THP, legacy (PMD+) or modern
(continuous PTEs).
To make it work, the generic slow gup code will need to at least
understand hugepd, which is already done like so in fast-gup. Due to the
specialty of hugepd to be software-only solution (no hardware recognizes
the hugepd format, so it's purely artificial structures), there's chance
we can merge some or all hugepd formats with cont_pte in the future. That
question is yet unsettled from Power side to have an acknowledgement. As
of now for this series, I kept the hugepd handling because we may still
need to do so before getting a clearer picture of the future of hugepd.
The other reason is simply that we did it already for fast-gup and most
codes are still around to be reused. It'll make more sense to keep
slow/fast gup behave the same before a decision is made to remove hugepd.
There's one major difference for slow-gup on cont_pte / cont_pmd handling,
currently supported on three architectures (aarch64, riscv, ppc). Before
the series, slow gup will be able to recognize e.g. cont_pte entries with
the help of huge_pte_offset() when hstate is around. Now it's gone but
still working, by looking up pgtable entries one by one.
It's not ideal, but hopefully this change should not affect yet on major
workloads. There's some more information in the commit message of the
last patch. If this would be a concern, we can consider teaching slow gup
to recognize cont pte/pmd entries, and that should recover the lost
performance. But I doubt its necessity for now, so I kept it as simple as
it can be.
Patch layout
=============
Patch 1-8: Preparation works, or cleanups in relevant code paths
Patch 9-11: Teach slow gup with all kinds of huge entries (pXd, hugepd)
Patch 12: Drop hugetlb_follow_page_mask()
More information can be found in the commit messages of each patch.
[1] https://lore.kernel.org/all/20230628215310.73782-1-peterx@redhat.com
[2] https://lore.kernel.org/r/20240321215047.678172-1-peterx@redhat.com
Introduce a config option that will be selected as long as huge leaves are
involved in pgtable (thp or hugetlbfs). It would be useful to mark any
code with this new config that can process either hugetlb or thp pages in
any level that is higher than pte level.
Link: https://lkml.kernel.org/r/20240327152332.950956-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20240327152332.950956-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Also remove mm_get_huge_zero_page() now it has no users.
Link: https://lkml.kernel.org/r/20240326202833.523759-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With all callers of is_huge_zero_page() converted, we can now switch the
huge_zero_page itself from being a compound page to a folio.
Link: https://lkml.kernel.org/r/20240326202833.523759-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert the pmd directly to a folio and use it. Turns four calls to
compound_head() into one.
Link: https://lkml.kernel.org/r/20240326202833.523759-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert directly from a pmd to a folio without going through another
representation first. For now this is just a slightly shorter way to
write it, but it might end up being more efficient later.
Link: https://lkml.kernel.org/r/20240326202833.523759-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This is the folio equivalent of is_huge_zero_page(). It doesn't add any
efficiency, but it does prevent the caller from passing a tail page and
getting confused when the predicate returns false.
Link: https://lkml.kernel.org/r/20240326202833.523759-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Very deep RB tree requires rebalance at times. That contributes to the
zswap fault latencies. Xarray does not need to perform tree rebalance.
Replacing RB tree to xarray can have some small performance gain.
One small difference is that xarray insert might fail with ENOMEM, while
RB tree insert does not allocate additional memory.
The zswap_entry size will reduce a bit due to removing the RB node, which
has two pointers and a color field. Xarray store the pointer in the
xarray tree rather than the zswap_entry. Every entry has one pointer from
the xarray tree. Overall, switching to xarray should save some memory, if
the swap entries are densely packed.
Notice the zswap_rb_search and zswap_rb_insert often followed by
zswap_rb_erase. Use xa_erase and xa_store directly. That saves one tree
lookup as well.
Remove zswap_invalidate_entry due to no need to call zswap_rb_erase any
more. Use zswap_free_entry instead.
The "struct zswap_tree" has been replaced by "struct xarray". The tree
spin lock has transferred to the xarray lock.
Run the kernel build testing 5 times for each version, averages:
(memory.max=2GB, zswap shrinker and writeback enabled, one 50GB swapfile,
24 HT core, 32 jobs)
mm-unstable-4aaccadb5c04 xarray v9
user 3548.902 3534.375
sys 522.232 520.976
real 202.796 200.864
[chrisl@kernel.org: restore original comment "erase" to "invalidate"]
Link: https://lkml.kernel.org/r/20240326-zswap-xarray-v10-1-bf698417c968@kernel.org
Link: https://lkml.kernel.org/r/20240326-zswap-xarray-v9-1-d2891a65dfc7@kernel.org
Signed-off-by: Chris Li <chrisl@kernel.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Earlier, in commit 1dd214b8f2 ("mm: page_alloc: avoid merging
non-fallbackable pageblocks with others"), migrate type MIGRATE_CMA and
MIGRATE_ISOLATE are removed from fallbacks list since they are never used.
Later on, in commit ("aa02d3c174ab mm/page_alloc: reduce fallbacks to
(MIGRATE_PCPTYPES - 1)"), the array column size is reduced to
'MIGRATE_PCPTYPES - 1'. In fact, the array row size need be reduced to
MIGRATE_PCPTYPES too since it's only covering rows of the number
MIGRATE_PCPTYPES. Even though the current code has handled cases
when the migratetype is CMA, HIGHATOMIC and MEMORY_ISOLATION, making
the row size right is still good to avoid future error and confusion.
Link: https://lkml.kernel.org/r/20240326061134.1055295-8-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On one node, for lower zone's ->lowmem_reserve[], it will show how much
memory is reserved in this lower zone to avoid excessive page allocation
from the relevant higher zone's fallback allocation.
However, currently lower zone's lowmem_reserve[] element will be filled
even though the relevant higher zone is empty. That doesnt' make sense
and can cause confusion.
E.g on node 0 of one system as below, it has zone
DMA/DMA32/NORMAL/MOVABLE/DEVICE, among them zone MOVABLE/DEVICE are the
highest and both are empty. In zone DMA/DMA32's protection array, we can
see that it has value for zone MOVABLE and DEVICE.
Node 0, zone DMA
......
pages free 2816
boost 0
min 7
low 10
high 13
spanned 4095
present 3998
managed 3840
cma 0
protection: (0, 1582, 23716, 23716, 23716)
......
Node 0, zone DMA32
pages free 403269
boost 0
min 753
low 1158
high 1563
spanned 1044480
present 487039
managed 405070
cma 0
protection: (0, 0, 22134, 22134, 22134)
......
Node 0, zone Normal
pages free 5423879
boost 0
min 10539
low 16205
high 21871
spanned 5767168
present 5767168
managed 5666438
cma 0
protection: (0, 0, 0, 0, 0)
......
Node 0, zone Movable
pages free 0
boost 0
min 32
low 32
high 32
spanned 0
present 0
managed 0
cma 0
protection: (0, 0, 0, 0, 0)
Node 0, zone Device
pages free 0
boost 0
min 0
low 0
high 0
spanned 0
present 0
managed 0
cma 0
protection: (0, 0, 0, 0, 0)
Here, clear out the element value in lower zone's ->lowmem_reserve[] if the
relevant higher zone is empty.
And also replace space with tab in _deferred_grow_zone()
Link: https://lkml.kernel.org/r/20240326061134.1055295-7-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The noinline attribute has been taken off in commit 9420f89db2 ("mm:
move most of core MM initialization to mm/mm_init.c"). So remove the
unneeded code comment above deferred_grow_zone().
And also remove the unneeded bracket in deferred_init_pages().
Link: https://lkml.kernel.org/r/20240326061134.1055295-6-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When CONFIG_NUMA=n, MAX_NUMNODES is always 1 because Kconfig item
NODES_SHIFT depends on NUMA. So in !NUMA version of build_zonelists(), no
need to bother with the two for loop because code execution won't enter
them ever.
Here, remove those unneeded codes in !NUMA version of build_zonelists().
[bhe@redhat.com: remove unused locals]
Link: https://lkml.kernel.org/r/ZgQL1WOf9K88nLpQ@MiWiFi-R3L-srv
Link: https://lkml.kernel.org/r/20240326061134.1055295-5-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's only called in mm/mm_init.c now.
Link: https://lkml.kernel.org/r/20240326061134.1055295-4-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Because memory-less node's ->node_present_pages and its zone's
->present_pages are all 0, the judgement before calling node_set_state()
to set N_MEMORY, N_HIGH_MEMORY, N_NORMAL_MEMORY for node is enough to skip
memory-less node. The 'continue;' statement inside for_each_node() loop
of free_area_init() is gilding the lily.
Here, remove the special handling to make memory-less node share the same
code flow as normal node.
And also rephrase the code comments above the 'continue' statement
and move them above above line 'if (pgdat->node_present_pages)'.
[bhe@redhat.com: redo code comments, per Mike]
Link: https://lkml.kernel.org/r/ZhYJAVQRYJSTKZng@MiWiFi-R3L-srv
Link: https://lkml.kernel.org/r/20240326061134.1055295-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/init: minor clean up and improvement".
These are all observed when going through code flow during mm init.
This patch (of 7):
When CONFIG_SPARSEMEM_EXTREME is enabled, mem_section need be initialized
to point at a two-dimensional array, and its 1st dimension of length
NR_SECTION_ROOTS will be dynamically allocated. Once the allocation is
done, it's available for all nodes.
So take the 1st dimension of mem_section initialization out of
memory_present()(), and put it into memblocks_present() which is a more
appripriate place.
Link: https://lkml.kernel.org/r/20240326061134.1055295-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20240326061134.1055295-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The hooks make multiple calls to functions in mm/memcontrol.c, including
to th current_obj_cgroup() marked __always_inline. It might be faster to
make a single call to the hook in mm/memcontrol.c instead. The hooks also
don't use almost anything from mm/slub.c. obj_full_size() can move with
the hooks and cache_vmstat_idx() to the internal mm/slab.h
Link: https://lkml.kernel.org/r/20240326-slab-memcg-v3-2-d85d2563287a@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "memcg_kmem hooks refactoring", v3.
This patch (of 2):
The MEMCG_KMEM integration with slab currently relies on two hooks during
allocation. memcg_slab_pre_alloc_hook() determines the objcg and charges
it, and memcg_slab_post_alloc_hook() assigns the objcg pointer to the
allocated object(s).
As Linus pointed out, this is unnecessarily complex. Failing to charge
due to memcg limits should be rare, so we can optimistically allocate the
object(s) and do the charging together with assigning the objcg pointer in
a single post_alloc hook. In the rare case the charging fails, we can
free the object(s) back.
This simplifies the code (no need to pass around the objcg pointer) and
potentially allows to separate charging from allocation in cases where
it's common that the allocation would be immediately freed, and the memcg
handling overhead could be saved.
[vbabka@suse.cz: fix call to memcg_alloc_abort_single()]
Link: https://lkml.kernel.org/r/4af50be2-4109-45e5-8a36-2136252a635e@suse.cz
[roman.gushchin@linux.dev: comment fixup]
Link: https://lkml.kernel.org/r/Zg2LsNm6twOmG69l@P9FQF9L96D.corp.robot.car
Link: https://lkml.kernel.org/r/20240326-slab-memcg-v3-0-d85d2563287a@suse.cz
Link: https://lkml.kernel.org/r/20240326-slab-memcg-v3-1-d85d2563287a@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/CAHk-=whYOOdM7jWy5jdrAm8LxcgCMFyk2bt8fYYvZzM4U-zAQA@mail.gmail.com/
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mostly rewording, but remove entirely the copy of page_fixed_fake_head()
in the documentation; we can refer people to the actual source if
necessary.
Link: https://lkml.kernel.org/r/20240326171045.410737-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use slub->__page_flags instead. We can also remove the assertion that
it's not a tail page as struct slab never points to a tail page.
Link: https://lkml.kernel.org/r/20240326171045.410737-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All implementations that aren't no-ops just set a bit in the flags, and we
want to use the folio flags rather than the page flags for that. Rename
it to arch_clear_hugetlb_flags() while we're touching it so nobody thinks
it's used for THP.
[willy@infradead.org: fix arm64 build]
Link: https://lkml.kernel.org/r/ZgQvNKGdlDkwhQEX@casper.infradead.org
Link: https://lkml.kernel.org/r/20240326171045.410737-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
None of the functions called by page_mapped() modify the page or folio, so
mark them all as const.
Link: https://lkml.kernel.org/r/20240326171045.410737-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This function does not modify its argument; let the callers know that so
they can make better optimisation decisions.
Link: https://lkml.kernel.org/r/20240326171045.410737-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In order to constify other functions, we need page_ext_get() to be const.
This is no problem as lookup_page_ext() already takes a const argument.
Link: https://lkml.kernel.org/r/20240326171045.410737-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
folio_is_secretmem() is currently only used during GUP-fast. Nowadays,
folio_fast_pin_allowed() performs similar checks during GUP-fast and
contains a lot of careful handling -- READ_ONCE() -- , sanity checks --
lockdep_assert_irqs_disabled() -- and helpful comments on how this
handling is safe and correct.
So let's merge folio_is_secretmem() into folio_fast_pin_allowed(). Rename
folio_fast_pin_allowed() to gup_fast_folio_allowed(), to better match the
new semantics.
Link: https://lkml.kernel.org/r/20240326143210.291116-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: xingwei lee <xrivendell7@gmail.com>
Cc: yue sun <samsun1006219@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
follow_phys is only used by two callers in arch/x86/mm/pat/memtype.c.
Move it there and hardcode the two arguments that get the same values
passed by both callers.
[david@redhat.com: conflict resolutions]
Link: https://lkml.kernel.org/r/20240403212131.929421-4-david@redhat.com
Link: https://lkml.kernel.org/r/20240324234542.2038726-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fei Li <fei1.li@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove follow_pfn now that the last user is gone.
Link: https://lkml.kernel.org/r/20240324234542.2038726-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fei Li <fei1.li@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use group allocation/free of per-cpu counters api to accelerate
wb_init/exit() and simplify code.
Link: https://lkml.kernel.org/r/20240325035635.49342-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
1. Add information about the behavior of huge page splitting, with
respect to page/folio refcounts, and gup/pup pins.
2. Update and clarify the existing documentation, to compensate for the
ravages of time and code change.
Link: https://lkml.kernel.org/r/20240325044452.217463-1-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are two types of iterators mas and vmi in the current code. If the
maple tree comes from the mm structure, we can use the vma iterator.
Avoid using mas directly as possible.
Keep using mas for the mt_detach tree, since it doesn't come from the mm
structure.
Remove as many uses of mas as possible, but we will still have a few that
must be passed through in unmap_vmas() and free_pgtables().
Also introduce vma_iter_reset, vma_iter_{prev, next}_range_limit and
vma_iter_area_{lowest, highest} helper functions for using the vma
interator.
Link: https://lkml.kernel.org/r/20240325063258.1437618-1-yajun.deng@linux.dev
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since the current calculation of calc_nr_kernel_pages() has taken into
consideration of kernel reserved memory, no need to have
arch_reserved_kernel_pages() any more.
Link: https://lkml.kernel.org/r/20240325145646.1044760-7-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, in free_area_init_core(), when initialize zone's field, a rough
value is set to zone->managed_pages. That value is calculated by
(zone->present_pages - memmap_pages).
In the meantime, add the value to nr_all_pages and nr_kernel_pages which
represent all free pages of system (only low memory or including HIGHMEM
memory separately). Both of them are gonna be used in
alloc_large_system_hash().
However, the rough calculation and setting of zone->managed_pages is
meaningless because
a) memmap pages are allocated on units of node in sparse_init() or
alloc_node_mem_map(pgdat); The simple (zone->present_pages -
memmap_pages) is too rough to make sense for zone;
b) the set zone->managed_pages will be zeroed out and reset with
acutal value in mem_init() via memblock_free_all(). Before the
resetting, no buddy allocation request is issued.
Here, remove the meaningless and complicated calculation of
(zone->present_pages - memmap_pages), directly set zone->managed_pages as
zone->present_pages for now. It will be adjusted in mem_init().
And also remove the assignment of nr_all_pages and nr_kernel_pages in
free_area_init_core(). Instead, call the newly added
calc_nr_kernel_pages() to count up all free but not reserved memory in
memblock and assign to nr_all_pages and nr_kernel_pages. The counting
excludes memmap_pages, and other kernel used data, which is more accurate
than old way and simpler, and can also cover the ppc required
arch_reserved_kernel_pages() case.
And also clean up the outdated code comment above free_area_init_core().
And free_area_init_core() is easy to understand now, no need to add words
to explain.
[bhe@redhat.com: initialize zone->managed_pages as zone->present_pages for now]
Link: https://lkml.kernel.org/r/ZgU0bsJ2FEjykvju@MiWiFi-R3L-srv
Link: https://lkml.kernel.org/r/20240325145646.1044760-5-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This is a preparation to calculate nr_kernel_pages and nr_all_pages, both
of which will be used later in alloc_large_system_hash().
nr_all_pages counts up all free but not reserved memory in memblock
allocator, including HIGHMEM memory. While nr_kernel_pages counts up all
free but not reserved low memory in memblock allocator, excluding HIGHMEM
memory.
Link: https://lkml.kernel.org/r/20240325145646.1044760-4-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now nobody calls set_dma_reserve() to set value for dma_reserve, remove
set_dma_reserve(), global variable dma_reserve and the codes using it.
Link: https://lkml.kernel.org/r/20240325145646.1044760-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of doing multiple tree walks, do one optimism range check with
lock hold, and exit if raced with another insertion. If a shadow exists,
check it with a new xas_get_order helper before releasing the lock to
avoid redundant tree walks for getting its order.
Drop the lock and do the allocation only if a split is needed.
In the best case, it only need to walk the tree once. If it needs to
alloc and split, 3 walks are issued (One for first ranged conflict check
and order retrieving, one for the second check after allocation, one for
the insert after split).
Testing with 4K pages, in an 8G cgroup, with 16G brd as block device:
echo 3 > /proc/sys/vm/drop_caches
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap --rw=randread --time_based \
--ramp_time=30s --runtime=5m --group_reporting
Before:
bw ( MiB/s): min= 1027, max= 3520, per=100.00%, avg=2445.02, stdev=18.90, samples=8691
iops : min=263001, max=901288, avg=625924.36, stdev=4837.28, samples=8691
After (+7.3%):
bw ( MiB/s): min= 493, max= 3947, per=100.00%, avg=2625.56, stdev=25.74, samples=8651
iops : min=126454, max=1010681, avg=672142.61, stdev=6590.48, samples=8651
Test result with THP (do a THP randread then switch to 4K page in hope it
issues a lot of splitting):
echo 3 > /proc/sys/vm/drop_caches
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap -thp=1 --readonly \
--rw=randread --time_based --ramp_time=30s --runtime=10m \
--group_reporting
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap \
--rw=randread --time_based --runtime=5s --group_reporting
Before:
bw ( KiB/s): min= 4141, max=14202, per=100.00%, avg=7935.51, stdev=96.85, samples=18976
iops : min= 1029, max= 3548, avg=1979.52, stdev=24.23, samples=18976·
READ: bw=4545B/s (4545B/s), 4545B/s-4545B/s (4545B/s-4545B/s), io=64.0KiB (65.5kB), run=14419-14419msec
After (+12.5%):
bw ( KiB/s): min= 4611, max=15370, per=100.00%, avg=8928.74, stdev=105.17, samples=19146
iops : min= 1151, max= 3842, avg=2231.27, stdev=26.29, samples=19146
READ: bw=4635B/s (4635B/s), 4635B/s-4635B/s (4635B/s-4635B/s), io=64.0KiB (65.5kB), run=14137-14137msec
The performance is better for both 4K (+7.5%) and THP (+12.5%) cached read.
Link: https://lkml.kernel.org/r/20240415171857.19244-5-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__filemap_add_folio only has two callers, one never passes hugetlb folio
and one always passes in hugetlb folio. So move the hugetlb related
cgroup charging out of it to make the code cleaner.
Link: https://lkml.kernel.org/r/20240415171857.19244-3-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/filemap: optimize folio adding and splitting", v4.
Currently, at least 3 tree walks are needed for filemap folio adding if
the folio is previously evicted. One for getting the order of current
slot, one for ranged conflict check, and one for another order retrieving.
If a split is needed, more walks are needed.
This series is trying to merge these walks, and speed up
filemap_add_folio, I see a 7.5% - 12.5% performance gain for fio stress
test.
So instead of doing multiple tree walks, do one optimism range check with
lock hold, and exit if raced with another insertion. If a shadow exists,
check it with a new xas_get_order helper before releasing the lock to
avoid redundant tree walks for getting its order.
Drop the lock and do the allocation only if a split is needed.
In the best case, it only need to walk the tree once. If it needs to
alloc and split, 3 walks are issued (One for first ranged conflict check
and order retrieving, one for the second check after allocation, one for
the insert after split).
Testing with 4K pages, in an 8G cgroup, with 16G brd as block device:
echo 3 > /proc/sys/vm/drop_caches
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap --rw=randread --time_based \
--ramp_time=30s --runtime=5m --group_reporting
Before:
bw ( MiB/s): min= 1027, max= 3520, per=100.00%, avg=2445.02, stdev=18.90, samples=8691
iops : min=263001, max=901288, avg=625924.36, stdev=4837.28, samples=8691
After (+7.3%):
bw ( MiB/s): min= 493, max= 3947, per=100.00%, avg=2625.56, stdev=25.74, samples=8651
iops : min=126454, max=1010681, avg=672142.61, stdev=6590.48, samples=8651
Test result with THP (do a THP randread then switch to 4K page in hope it
issues a lot of splitting):
echo 3 > /proc/sys/vm/drop_caches
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap -thp=1 --readonly \
--rw=randread --time_based --ramp_time=30s --runtime=10m \
--group_reporting
fio -name=cached --numjobs=16 --filename=/mnt/test.img \
--buffered=1 --ioengine=mmap \
--rw=randread --time_based --runtime=5s --group_reporting
Before:
bw ( KiB/s): min= 4141, max=14202, per=100.00%, avg=7935.51, stdev=96.85, samples=18976
iops : min= 1029, max= 3548, avg=1979.52, stdev=24.23, samples=18976·
READ: bw=4545B/s (4545B/s), 4545B/s-4545B/s (4545B/s-4545B/s), io=64.0KiB (65.5kB), run=14419-14419msec
After (+10.4%):
bw ( KiB/s): min= 4611, max=15370, per=100.00%, avg=8928.74, stdev=105.17, samples=19146
iops : min= 1151, max= 3842, avg=2231.27, stdev=26.29, samples=19146
READ: bw=4635B/s (4635B/s), 4635B/s-4635B/s (4635B/s-4635B/s), io=64.0KiB (65.5kB), run=14137-14137msec
The performance is better for both 4K (+7.5%) and THP (+12.5%) cached read.
This patch (of 4):
xas_split_alloc could fail with NOMEM, and in such case, it should abort
early instead of keep going and fail the xas_split below.
Link: https://lkml.kernel.org/r/20240416071722.45997-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20240415171857.19244-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20240415171857.19244-2-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Callers of folio_estimated_sharers() only care about "mapped shared vs.
mapped exclusively", not the exact estimate of sharers. Let's consolidate
and unify the condition users are checking. While at it clarify the
semantics and extend the discussion on the fuzziness.
Use the "likely mapped shared" terminology to better express what the
(adjusted) function actually checks.
Whether a partially-mappable folio is more likely to not be partially
mapped than partially mapped is debatable. In the future, we might be
able to improve our estimate for partially-mappable folios, though.
Note that we will now consistently detect "mapped shared" only if the
first subpage is actually mapped multiple times. When the first subpage
is not mapped, we will consistently detect it as "mapped exclusively".
This change should currently only affect the usage in
madvise_free_pte_range() and queue_folios_pte_range() for large folios: if
the first page was already unmapped, we would have skipped the folio.
[david@redhat.com: folio_likely_mapped_shared() kerneldoc fixup]
Link: https://lkml.kernel.org/r/dd0ad9f2-2d7a-45f3-9ba3-979488c7dd27@redhat.com
Link: https://lkml.kernel.org/r/20240227201548.857831-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Acked-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
