Carve out the SMCA code in get_block_address() into a separate helper
function.
No functional change.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
[ Save an indentation level. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180215210943.11530-4-Yazen.Ghannam@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The block address is saved after the block is initialized when
threshold_init_device() is called.
Use the saved block address, if available, rather than trying to
rediscover it.
This will avoid a call trace, when resuming from suspend, due to the
rdmsr_safe_on_cpu() call in get_block_address(). The rdmsr_safe_on_cpu()
call issues an IPI but we're running with interrupts disabled. This
triggers:
WARNING: CPU: 0 PID: 11523 at kernel/smp.c:291 smp_call_function_single+0xdc/0xe0
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # 4.14.x
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180221101900.10326-8-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, bank 4 is reserved on Fam17h, so we chose not to initialize
bank 4 in the smca_banks array. This means that when we check if a bank
is initialized, like during boot or resume, we will see that bank 4 is
not initialized and try to initialize it.
This will cause a call trace, when resuming from suspend, due to
rdmsr_*on_cpu() calls in the init path. The rdmsr_*on_cpu() calls issue
an IPI but we're running with interrupts disabled. This triggers:
WARNING: CPU: 0 PID: 11523 at kernel/smp.c:291 smp_call_function_single+0xdc/0xe0
...
Reserved banks will be read-as-zero, so their MCA_IPID register will be
zero. So, like the smca_banks array, the threshold_banks array will not
have an entry for a reserved bank since all its MCA_MISC* registers will
be zero.
Enumerate a "Reserved" bank type that matches on a HWID_MCATYPE of 0,0.
Use the "Reserved" type when checking if a bank is reserved. It's
possible that other bank numbers may be reserved on future systems.
Don't try to find the block address on reserved banks.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # 4.14.x
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180221101900.10326-7-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pass the bank number to smca_get_bank_type() since that's all we need.
Also, we should compare the bank number to MAX_NR_BANKS (size of the
smca_banks array) not the number of bank types. Bank types are reused
for multiple banks, so the number of types can be different from the
number of banks in a system and thus we could return an invalid bank
type.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # 4.14.x
Cc: <stable@vger.kernel.org> # 4.14.x: 11cf887728 x86/MCE/AMD: Define a function to get SMCA bank type
Cc: <stable@vger.kernel.org> # 4.14.x: c6708d50f1 x86/MCE: Report only DRAM ECC as memory errors on AMD systems
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180221101900.10326-6-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The MCA_STATUS[ErrorCodeExt] field is very bank type specific.
We currently check if the ErrorCodeExt value is 0x0 or 0x8 in
mce_is_memory_error(), but we don't check the bank number. This means
that we could flag non-memory errors as memory errors.
We know that we want to flag DRAM ECC errors as memory errors, so let's do
those cases first. We can add more cases later when needed.
Define a wrapper function in mce_amd.c so we can use SMCA enums.
[ bp: Remove brackets around return statements. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171207203955.118171-2-Yazen.Ghannam@amd.com
Scalable MCA systems have various types of banks. The bank's type
can determine how we handle errors from it. For example, if a bank
represents a UMC (Unified Memory Controller) then we will need to
convert its address from a normalized address to a system physical
address before handling the error.
[ bp: Verify m->bank is within range and use bank pointer. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171207203955.118171-1-Yazen.Ghannam@amd.com
The McaIntrCfg register (MSRC000_0410), previously known as CU_DEFER_ERR,
is used on SMCA systems to set the LVT offset for the Threshold and
Deferred error interrupts.
This register was used on non-SMCA systems to also set the Deferred
interrupt type in bits 2:1. However, these bits are reserved on SMCA
systems.
Only set MSRC000_0410[2:1] on non-SMCA systems.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20171120162646.5210-1-Yazen.Ghannam@amd.com
Now that lguest is gone, put it in the internal header which should be
used only by MCA/RAS code.
Add missing header guards while at it.
No functional change.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20171002092836.22971-3-bp@alien8.de
Pull x86 apic updates from Thomas Gleixner:
"This update provides:
- Cleanup of the IDT management including the removal of the extra
tracing IDT. A first step to cleanup the vector management code.
- The removal of the paravirt op adjust_exception_frame. This is a
XEN specific issue, but merged through this branch to avoid nasty
merge collisions
- Prevent dmesg spam about the TSC DEADLINE bug, when the CPU has
disabled the TSC DEADLINE timer in CPUID.
- Adjust a debug message in the ioapic code to print out the
information correctly"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
x86/idt: Fix the X86_TRAP_BP gate
x86/xen: Get rid of paravirt op adjust_exception_frame
x86/eisa: Add missing include
x86/idt: Remove superfluous ALIGNment
x86/apic: Silence "FW_BUG TSC_DEADLINE disabled due to Errata" on CPUs without the feature
x86/idt: Remove the tracing IDT leftovers
x86/idt: Hide set_intr_gate()
x86/idt: Simplify alloc_intr_gate()
x86/idt: Deinline setup functions
x86/idt: Remove unused functions/inlines
x86/idt: Move interrupt gate initialization to IDT code
x86/idt: Move APIC gate initialization to tables
x86/idt: Move regular trap init to tables
x86/idt: Move IST stack based traps to table init
x86/idt: Move debug stack init to table based
x86/idt: Switch early trap init to IDT tables
x86/idt: Prepare for table based init
x86/idt: Move early IDT setup out of 32-bit asm
x86/idt: Move early IDT handler setup to IDT code
x86/idt: Consolidate IDT invalidation
...
Machine checks are not really high frequency events. The extra two NOP5s for
the disabled tracepoints are noise vs. the heavy lifting which needs to be
done in the MCE handler.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170828064957.144301907@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Current SMCA implementations have the same banks on each CPU with the
non-core banks only visible to a "master thread" on each die. Practically,
this means the smca_banks array, which describes the banks, only needs to
be populated once by a single master thread.
CPU 0 seemed like a good candidate to do the populating. However, it's
possible that CPU 0 is not enabled in which case the smca_banks array won't
be populated.
Rather than try to figure out another master thread to do the populating,
we should just allow any CPU to populate the array.
Drop the CPU 0 check and return early if the bank was already initialized.
Also, drop the WARNing about an already initialized bank, since this will
be a common, expected occurrence.
The smca_banks array is only populated at boot time and CPUs are brought
online sequentially. So there's no need for locking around the array.
If the first CPU up is a master thread, then it will populate the array
with all banks, core and non-core. Every CPU afterwards will return
early. If the first CPU up is not a master thread, then it will populate
the array with all core banks. The first CPU afterwards that is a master
thread will skip populating the core banks and continue populating the
non-core banks.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jack Miller <jack@codezen.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170724101228.17326-4-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the amd_threshold_interrupt() handler, we loop through every possible
block in each bank and rediscover the block's address and if it's valid,
e.g. valid, counter present and not locked.
However, we already have the address saved in the threshold blocks list
for each CPU and bank. The list only contains blocks that have passed
all the valid checks.
Besides the redundancy, there's also a smp_call_function* in
get_block_address() which causes a warning when servicing the interrupt:
WARNING: CPU: 0 PID: 0 at kernel/smp.c:281 smp_call_function_single+0xdd/0xf0
...
Call Trace:
<IRQ>
rdmsr_safe_on_cpu()
get_block_address.isra.2()
amd_threshold_interrupt()
smp_threshold_interrupt()
threshold_interrupt()
because we do get called in an interrupt handler *with* interrupts
disabled, which can result in a deadlock.
Drop the redundant valid checks and move the overflow check, logging and
block reset into a separate function.
Check the first block then iterate over the rest. This procedure is
needed since the first block is used as the head of the list.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170613162835.30750-3-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The value of MCA_STATUS is used as the MSR when clearing MCA_STATUS.
This may cause the following warning:
unchecked MSR access error: WRMSR to 0x11b (tried to write 0x0000000000000000)
Call Trace:
<IRQ>
smp_threshold_interrupt()
threshold_interrupt()
Use msr_stat instead which has the MSR address.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Fixes: 37d43acfd7 ("x86/mce/AMD: Redo error logging from APIC LVT interrupt handlers")
Link: http://lkml.kernel.org/r/20170613162835.30750-2-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Scalable MCA systems have a new MCA_CONFIG register that we use to
configure each bank. We currently use this when we set up thresholding.
However, this is logically separate.
Group all SMCA-related initialization into a single function.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1493147772-2721-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We have support for the new SMCA MCA_DE{STAT,ADDR} registers in Linux.
So we've used these registers in place of MCA_{STATUS,ADDR} on SMCA
systems.
However, the guidance for current SMCA implementations of is to continue
using MCA_{STATUS,ADDR} and to use MCA_DE{STAT,ADDR} only if a Deferred
error was not found in the former registers. If we logged a Deferred
error in MCA_STATUS then we should also clear MCA_DESTAT. This also
means we shouldn't clear MCA_CONFIG[LogDeferredInMcaStat].
Rework __log_error() to only log an error and add helpers for the
different error types being logged from the corresponding interrupt
handlers.
Boris: carve out common functionality into a _log_error_bank(). Cleanup
comments, check MCi_STATUS bits before reading MSRs. Streamline flow.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1493147772-2721-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The refcount_t type and corresponding API should be used instead
of atomic_t when the variable is used as a reference counter. This
allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1492695536-5947-1-git-send-email-elena.reshetova@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
MCA bank 3 is reserved on systems pre-Fam17h, so it didn't have a name.
However, MCA bank 3 is defined on Fam17h systems and can be accessed
using legacy MSRs. Without a name we get a stack trace on Fam17h systems
when trying to register sysfs files for bank 3 on kernels that don't
recognize Scalable MCA.
Call MCA bank 3 "decode_unit" since this is what it represents on
Fam17h. This will allow kernels without SMCA support to see this bank on
Fam17h+ and prevent the stack trace. This will not affect older systems
since this bank is reserved on them, i.e. it'll be ignored.
Tested on AMD Fam15h and Fam17h systems.
WARNING: CPU: 26 PID: 1 at lib/kobject.c:210 kobject_add_internal
kobject: (ffff88085bb256c0): attempted to be registered with empty name!
...
Call Trace:
kobject_add_internal
kobject_add
kobject_create_and_add
threshold_create_device
threshold_init_device
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1490102285-3659-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull x86 fixes from Ingo Molnar:
"Two documentation updates, plus a debugging annotation fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/crash: Update the stale comment in reserve_crashkernel()
x86/irq, trace: Add __irq_entry annotation to x86's platform IRQ handlers
Documentation, x86, resctrl: Recommend locking for resctrlfs
Add the TSC value to the MCE record only when the MCE being logged is
precise, i.e., it is logged as an exception or an MCE-related interrupt.
So it doesn't look particularly easy to do without touching/changing a
bunch of places. That's why I'm trying tricks first.
For example, the mce-apei.c case I'm addressing by setting ->tsc only
for errors of panic severity. The idea there is, that, panic errors will
have raised an #MC and not polled.
And then instead of propagating a flag to mce_setup(), it seems
easier/less code to set ->tsc depending on the call sites, i.e.,
are we polling or are we preparing an MCE record in an exception
handler/thresholding interrupt.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170123183514.13356-5-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, we append the MCA_IPID[InstanceId] to the bank name to create
the sysfs filename. The InstanceId field uniquely identifies a bank
instance but it doesn't look very nice for most banks.
Replace the InstanceId with a simpler, ascending (0, 1, ..) value.
Only use this in the sysfs name when there is more than 1 instance.
Otherwise, just use the bank's name as the sysfs name.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1484322741-41884-3-git-send-email-Yazen.Ghannam@amd.com
Link: http://lkml.kernel.org/r/20170123183514.13356-4-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If mce_device_init() fails then the mce device pointer is NULL and the
AMD mce code happily dereferences it.
Add a sanity check.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull smp hotplug updates from Thomas Gleixner:
"This is the final round of converting the notifier mess to the state
machine. The removal of the notifiers and the related infrastructure
will happen around rc1, as there are conversions outstanding in other
trees.
The whole exercise removed about 2000 lines of code in total and in
course of the conversion several dozen bugs got fixed. The new
mechanism allows to test almost every hotplug step standalone, so
usage sites can exercise all transitions extensively.
There is more room for improvement, like integrating all the
pointlessly different architecture mechanisms of synchronizing,
setting cpus online etc into the core code"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
tracing/rb: Init the CPU mask on allocation
soc/fsl/qbman: Convert to hotplug state machine
soc/fsl/qbman: Convert to hotplug state machine
zram: Convert to hotplug state machine
KVM/PPC/Book3S HV: Convert to hotplug state machine
arm64/cpuinfo: Convert to hotplug state machine
arm64/cpuinfo: Make hotplug notifier symmetric
mm/compaction: Convert to hotplug state machine
iommu/vt-d: Convert to hotplug state machine
mm/zswap: Convert pool to hotplug state machine
mm/zswap: Convert dst-mem to hotplug state machine
mm/zsmalloc: Convert to hotplug state machine
mm/vmstat: Convert to hotplug state machine
mm/vmstat: Avoid on each online CPU loops
mm/vmstat: Drop get_online_cpus() from init_cpu_node_state/vmstat_cpu_dead()
tracing/rb: Convert to hotplug state machine
oprofile/nmi timer: Convert to hotplug state machine
net/iucv: Use explicit clean up labels in iucv_init()
x86/pci/amd-bus: Convert to hotplug state machine
x86/oprofile/nmi: Convert to hotplug state machine
...
Pull x86 idle updates from Ingo Molnar:
"There were two bigger changes in this development cycle:
- remove idle notifiers:
32 files changed, 74 insertions(+), 803 deletions(-)
These notifiers were of questionable value and the main usecase,
the i7300 driver, was essentially unmaintained and can be removed,
plus modern power management concepts don't need the callback - so
use this golden opportunity and get rid of this opaque and fragile
callback from a latency sensitive code path.
(Len Brown, Thomas Gleixner)
- improve the AMD Erratum 400 workaround that used high overhead MSR
polling in the idle loop (Borisla Petkov, Thomas Gleixner)"
* 'x86-idle-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Remove empty idle.h header
x86/amd: Simplify AMD E400 aware idle routine
x86/amd: Check for the C1E bug post ACPI subsystem init
x86/bugs: Separate AMD E400 erratum and C1E bug
x86/cpufeature: Provide helper to set bugs bits
x86/idle: Remove enter_idle(), exit_idle()
x86: Remove x86_test_and_clear_bit_percpu()
x86/idle: Remove is_idle flag
x86/idle: Remove idle_notifier
i7300_idle: Remove this driver
One include less is always a good thing(tm). Good riddance.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20161209182912.2726-6-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The Unified Memory Controllers (UMCs) on Fam17h log a normalized address
in their MCA_ADDR registers. We need to convert that normalized address
to a system physical address in order to support a few facilities:
1) To offline poisoned pages in DRAM proactively in the deferred error
handler.
2) To print sysaddr and page info for DRAM ECC errors in EDAC.
[ Boris: fixes/cleanups ontop:
* hi_addr_offset = 0 - no need for that branch. Stick it all under the
HiAddrOffsetEn case. It confines hi_addr_offset's declaration too.
* Move variables to the innermost scope they're used at so that we save
on stack and not blow it up immediately on function entry.
* Do not modify *sys_addr prematurely - we want to not exit early and
have modified *sys_addr some, which callers get to see. We either
convert to a sys_addr or we don't do anything. And we signal that with
the retval of the function.
* Rename label out -> out_err - because it is the error path.
* No need to pr_err of the conversion failed case: imagine a
sparsely-populated machine with UMCs which don't have DIMMs. Callers
should look at the retval instead and issue a printk only when really
necessary. No need for useless info in dmesg.
* s/temp_reg/tmp/ and other variable names shortening => shorter code.
* Use BIT() everywhere.
* Make error messages more informative.
* Small build fix for the !CONFIG_X86_MCE_AMD case.
* ... and more minor cleanups.
]
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20161122111133.mjzpvzhf7o7yl2oa@pd.tnic
[ Typo fixes. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So adding thresholding_en et al was a good thing for removing the
per-CPU thresholding callback, i.e., threshold_cpu_callback.
But, in order for it to work and especially that test in
mce_threshold_create_device() so that all thresholding banks get
properly created and not the whole thing to fail with a NULL ptr
dereference at mce_cpu_pre_down() when we offline the CPUs, we need to
set the thresholding_en flag *before* we start creating the devices.
Yap, it failed because thresholding_en wasn't set at the time
we were creating the banks so we didn't create any and then at
mce_cpu_pre_down() -> mce_threshold_remove_device() time, we would blow
up.
And the fix is actually easy: we have thresholding on the system when we
have managed to set the thresholding vector to amd_threshold_interrupt()
earlier in mce_amd_feature_init() while we were picking apart the
thresholding banks and what is set and what not.
So let's do that.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Fixes: 4d7b02d58c ("x86/mcheck: Split threshold_cpu_callback into two callbacks")
Link: http://lkml.kernel.org/r/20161119103402.5227-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The error count field in MCA_MISC does not get reset by hardware when the
threshold has been reached. Software is expected to reset it. Currently,
the threshold limit only gets reset during init or when a user writes to
sysfs.
If the user is not monitoring threshold interrupts and resetting
the limit then the user will only see 1 interrupt when the limit is first
hit. So if, for example, the limit is set to 10 then only 1 interrupt will
be recorded after 10 errors even if 100 errors have occurred. The user may
then assume that only 10 errors have occurred.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1479244433-69267-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The threshold_cpu_callback callbacks looks like one of the notifier and
its arguments are almost the same. Split this out and have one ONLINE
and one DEAD callback. This will come handy later once the main code
gets changed to use the callback mechanism.
Also, handle threshold_cpu_callback_online() return value so we don't
continue if the function fails.
Boris Petkov removed the callback pointer and replaced it with proper
functions.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: rt@linutronix.de
Cc: linux-edac@vger.kernel.org
Link: http://lkml.kernel.org/r/20161110174447.11848-5-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If we try a CPU down and fail in the middle then we roll back to the
online state. This means we would perform CPU_ONLINE / mce_device_create()
without invoking CPU_DEAD / mce_device_remove() for the cleanup of what was
allocated in CPU_ONLINE.
Be prepared for this and don't allocate the struct if we have it
already.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: rt@linutronix.de
Cc: linux-edac@vger.kernel.org
Link: http://lkml.kernel.org/r/20161110174447.11848-4-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If the ONLINE callback fails, the driver does not any clean up right
away instead it waits to get to the DEAD stage to do it. Yes, it waits.
Since we don't pass the error code back to the caller, no one knows.
Do the clean up right away so it does not look like a leak.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: rt@linutronix.de
Cc: linux-edac@vger.kernel.org
Link: http://lkml.kernel.org/r/20161110174447.11848-3-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add accessor functions and hide the smca_names array. Also, add a
sanity-check to bank HWID assignment in get_smca_bank_info().
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20161104152317.5r276t35df53qk76@pd.tnic
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Make it differ more from struct smca_bank_name for better readability.
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: http://lkml.kernel.org/r/20161103125556.15482-3-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Call it simply smca_hwid and call local variables "hwid". More readable.
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: http://lkml.kernel.org/r/20161103125556.15482-2-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Call the struct simply smca_bank, it's instance ID can be simply ->id.
Makes the code much more readable.
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: http://lkml.kernel.org/r/20161103125556.15482-1-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The MCA_ADDR registers on Scalable MCA systems contain the ErrorAddr
in bits [55:0] and the least significant bit of the address in bits
[61:56]. We should extract the valid ErrorAddr bits from the MCA_ADDR
register rather than saving the raw value to struct mce.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1473275643-1721-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The MCA_IPID register uniquely identifies a bank's type and instance
on Scalable MCA systems. We should save the value of this register
in struct mce along with the other relevant error information. This
ensures that we can decode errors without relying on system software to
correlate the bank to the type.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472680624-34221-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The Deferred Error Interrupt Type is set per bank on Scalable MCA
systems. This is done in a bitfield in the MCA_CONFIG register of each
bank. We should set its type to APIC-based interrupt and not assume BIOS
has set it for us.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472737486-1720-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Define a bank's sysfs filename based on its IP type and InstanceId.
Credits go to Aravind for:
* The general idea and proto- get_name().
* Defining smca_umc_block_names[] and buf_mcatype[].
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Link: http://lkml.kernel.org/r/1473193490-3291-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Scalable MCA defines a number of IP types. An MCA bank on an SMCA
system is defined as one of these IP types. A bank's type is uniquely
identified by the combination of the HWID and MCATYPE values read from
its MCA_IPID register.
Add the required tables in order to be able to lookup error descriptions
based on a bank's type and the error's extended error code.
[ bp: Align comments, simplify a bit. ]
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472741832-1690-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Scalable MCA systems allow non-core MCA banks to only be accessible by
certain CPUs. The MSRs for these banks are Read-as-Zero on other CPUs.
During allocate_threshold_blocks(), get_block_address() can be scheduled
on CPUs other than the one allocating the block. This causes the MSRs to
be read on the wrong CPU and results in incorrect behavior.
Add a @cpu parameter to get_block_address() and pass this in to ensure
that the MSRs are only read on the CPU that is allocating the block.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1472673994-12235-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Syndrome information is no longer contained in MCA_STATUS for SMCA
systems but in a new register - MCA_SYND.
Add a synd field to struct mce to hold MCA_SYND register value. Add it
to the end of struct mce to maintain compatibility with old versions of
mcelog. Also, add it to the respective tracepoint.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1467633035-32080-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change MSR_IA32_MCx_MISC() macro to msr_ops.misc() because SMCA machines
define a different set of MSRs and msr_ops will give you the correct
MISC register.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1468269447-8808-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change bank_map type from 'char' to 'int' since we now have more than eight
banks in a system.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1467968983-4874-2-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Do the !SMCA work first and then save us an indentation level for the
SMCA code.
No functionality change.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1462971509-3856-4-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Disable Deferred Error logging in MCA_{STATUS,ADDR} additionally for
SMCA systems as this information will retrieved from MCA_DE{STAT,ADDR}
on those systems.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
[ Simplify, drop SMCA_MCAX_EN_OFF define too. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1462971509-3856-3-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Scalable MCA provides new registers for all banks for logging deferred
errors: MCA_DESTAT and MCA_DEADDR. Deferred errors are always logged to
these registers.
Update the AMD deferred error handler to use these registers, if
available.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
[ Sanity-check __log_error() args, massage a bit. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1462971509-3856-2-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Replace all calls to MCx_IA32_{CTL,ADDR,MISC,STATUS} with the
appropriate msr_ops.
Use SMCA-specific msr_ops when on an SMCA-enabled processor.
Carved out from a patch by Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1462019637-16474-6-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In an attempt to aid in understanding of what the threshold_block
structure holds, provide comments to describe the members here. Also,
trim comments around threshold_restart_bank() and update copyright info.
No functional change is introduced.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
[ Shorten comments. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1457021458-2522-6-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
