Clang warns:
arch/hexagon/mm/vm_fault.c:157:6: warning: no previous prototype for function 'read_protection_fault' [-Wmissing-prototypes]
157 | void read_protection_fault(struct pt_regs *regs)
| ^
arch/hexagon/mm/vm_fault.c:157:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
157 | void read_protection_fault(struct pt_regs *regs)
| ^
| static
arch/hexagon/mm/vm_fault.c:164:6: warning: no previous prototype for function 'write_protection_fault' [-Wmissing-prototypes]
164 | void write_protection_fault(struct pt_regs *regs)
| ^
arch/hexagon/mm/vm_fault.c:164:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
164 | void write_protection_fault(struct pt_regs *regs)
| ^
| static
arch/hexagon/mm/vm_fault.c:171:6: warning: no previous prototype for function 'execute_protection_fault' [-Wmissing-prototypes]
171 | void execute_protection_fault(struct pt_regs *regs)
| ^
arch/hexagon/mm/vm_fault.c:171:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
171 | void execute_protection_fault(struct pt_regs *regs)
| ^
| static
The prototypes for these functions are defined in asm/vm_fault.h, so
include it to pick them up and silence the warnings.
Link: https://lkml.kernel.org/r/20231130-hexagon-missing-prototypes-v1-6-5c34714afe9e@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brian Cain <bcain@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Clang warns:
arch/hexagon/mm/vm_fault.c:36:6: warning: no previous prototype for function 'do_page_fault' [-Wmissing-prototypes]
36 | void do_page_fault(unsigned long address, long cause, struct pt_regs *regs)
| ^
arch/hexagon/mm/vm_fault.c:36:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
36 | void do_page_fault(unsigned long address, long cause, struct pt_regs *regs)
| ^
| static
This function is not used outside of this translation unit, so mark it
as static.
Link: https://lkml.kernel.org/r/20231130-hexagon-missing-prototypes-v1-5-5c34714afe9e@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brian Cain <bcain@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Clang warns:
arch/hexagon/kernel/smp.c:82:13: warning: no previous prototype for function 'handle_ipi' [-Wmissing-prototypes]
82 | irqreturn_t handle_ipi(int irq, void *desc)
| ^
arch/hexagon/kernel/smp.c:82:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
82 | irqreturn_t handle_ipi(int irq, void *desc)
| ^
| static
arch/hexagon/kernel/smp.c:127:6: warning: no previous prototype for function 'start_secondary' [-Wmissing-prototypes]
127 | void start_secondary(void)
| ^
arch/hexagon/kernel/smp.c:127:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
127 | void start_secondary(void)
| ^
| static
2 warnings generated.
These functions are not used outside of this translation unit, so mark
them as static.
Link: https://lkml.kernel.org/r/20231130-hexagon-missing-prototypes-v1-4-5c34714afe9e@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brian Cain <bcain@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Clang warns:
arch/hexagon/mm/init.c:138:13: warning: no previous prototype for function 'setup_arch_memory' [-Wmissing-prototypes]
138 | void __init setup_arch_memory(void)
| ^
arch/hexagon/mm/init.c:138:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
138 | void __init setup_arch_memory(void)
| ^
| static
The prototype is in asm/setup.h, include it to clear up the warning.
Link: https://lkml.kernel.org/r/20231130-hexagon-missing-prototypes-v1-3-5c34714afe9e@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brian Cain <bcain@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Clang warns:
arch/hexagon/mm/init.c:89:13: warning: no previous prototype for function 'paging_init' [-Wmissing-prototypes]
89 | void __init paging_init(void)
| ^
arch/hexagon/mm/init.c:89:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
89 | void __init paging_init(void)
| ^
| static
This function is only used within this translation unit, so mark it static
as suggested.
Link: https://lkml.kernel.org/r/20231130-hexagon-missing-prototypes-v1-2-5c34714afe9e@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brian Cain <bcain@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "hexagon: Fix up instances of -Wmissing-prototypes".
This series fixes all the instances of -Wmissing-prototypes in
arch/hexagon, as it is about to be enabled globally in a default build.
This patch (of 19):
Clang warns:
arch/hexagon/mm/uaccess.c:39:15: warning: no previous prototype for function 'clear_user_hexagon' [-Wmissing-prototypes]
39 | unsigned long clear_user_hexagon(void __user *dest, unsigned long count)
| ^
arch/hexagon/mm/uaccess.c:39:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
39 | unsigned long clear_user_hexagon(void __user *dest, unsigned long count)
| ^
| static
1 warning generated.
This function appears to have been unused since it was introduced in
commit 7567746e1c ("Hexagon: Add user access functions"), so remove it.
Link: https://lkml.kernel.org/r/20231130-hexagon-missing-prototypes-v1-0-5c34714afe9e@kernel.org
Link: https://lkml.kernel.org/r/20231130-hexagon-missing-prototypes-v1-1-5c34714afe9e@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brian Cain <bcain@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A couple of architectures enable -Werror for their own files regardless of
CONFIG_WERROR but also have known warnings that fail the build with
-Wmissing-prototypes enabled by default:
arch/alpha/lib/memcpy.c:153:8: error: no previous prototype for 'memcpy' [-Werror=missing-prototypes]
arch/alpha/kernel/irq.c:96:1: error: no previous prototype for 'handle_irq' [-Werror=missing-prototypes]
arch/mips/kernel/signal.c:673:17: error: no previous prototype for ‘sys_rt_sigreturn’ [-Werror=missing-prototypes]
arch/mips/kernel/signal.c:636:17: error: no previous prototype for ‘sys_sigreturn’ [-Werror=missing-prototypes]
arch/mips/kernel/syscall.c:51:16: error: no previous prototype for ‘sysm_pipe’ [-Werror=missing-prototypes]
arch/mips/mm/fault.c:323:17: error: no previous prototype for ‘do_page_fault’ [-Werror=missing-prototypes]
arch/sparc/vdso/vma.c:246:12: warning: no previous prototype for ‘init_vdso_image’ [-Wmissing-prototypes]v
arch/sparc/vdso/vdso32/../vclock_gettime.c:343:1: warning: no previous prototype for ‘__vdso_gettimeofday_stick’ [-Wmissing-prototypes]
arch/sparc/vdso/vclock_gettime.c:343:1: warning: no previous prototype for ‘__vdso_gettimeofday_stick’ [-Wmissing-prototypes]
arch/sparc/prom/p1275.c:52:6: warning: no previous prototype for ‘prom_cif_init’ [-Wmissing-prototypes]
arch/sparc/prom/misc_64.c:165:5: warning: no previous prototype for ‘prom_get_mmu_ihandle’ [-Wmissing-prototypes]
This appears to be an artifact from the times when this architecture code
was better maintained that most device drivers and before CONFIG_WERROR
was added. Now it just gets in the way, so remove all of these.
Powerpc and x86 both still have their own Kconfig options to enable
-Werror for some of their files. These architectures are better
maintained than most and the options are easy to disable, so leave those
untouched.
Link: https://lkml.kernel.org/r/4be73872-c1f5-4c31-8201-712c19290a22@app.fastmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Stephen Rothwell <sfr@rothwell.id.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use atomic_try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
crash_kexec(). x86 CMPXCHG instruction returns success in ZF flag,
so this change saves a compare after cmpxchg.
No functional change intended.
Link: https://lkml.kernel.org/r/20231114161228.108516-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some of the more common spelling mistakes and typos that I've found while
fixing up spelling mistakes in the kernel over the past couple of
releases.
Link: https://lkml.kernel.org/r/20231122104037.1770749-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The corner case described by the comment is no longer possible after the
commit 7b3c36fc4c ("ptrace: fix task_join_group_stop() for the case when
current is traced"), task_join_group_stop() ensures that the new thread
has the correct signr in JOBCTL_STOP_SIGMASK regardless of ptrace.
Link: https://lkml.kernel.org/r/20231121162650.GA6635@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The checkstack script omits all functions with a stack usage of less than
100 bytes. However the script already has support for a parameter which
allows to override the default, but it cannot be set with
$ make checkstack
Add a MINSTACKSIZE parameter which allows to change the default. This might
be useful in order to print the stack usage of all functions, or only those
with large stack usage:
$ make checkstack MINSTACKSIZE=0
$ make checkstack MINSTACKSIZE=800
Link: https://lkml.kernel.org/r/20231120183719.2188479-4-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Maninder Singh <maninder1.s@samsung.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sort output by size and in addition by function name. This increases
readability for cases where there are many functions with the same stack
usage.
Link: https://lkml.kernel.org/r/20231120183719.2188479-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Maninder Singh <maninder1.s@samsung.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The purpose of recalc_sigpending_and_wake() is not clear, it looks
"obviously unneeded" because we are going to send the signal which can't
be blocked or ignored.
Add the comment to explain why we can't rely on send_signal_locked() and
make this logic more simple/explicit. recalc_sigpending_and_wake() has no
other users, it can die.
In fact I think we don't even need signal_wake_up(), the target task must
be either current or a TASK_TRACED child, otherwise the usage of siglock
is not safe. But this needs another change.
Link: https://lkml.kernel.org/r/20231120151649.GA15995@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When SQUASHFS_CHOICE_DECOMP_BY_MOUNT is set, the "threads" mount option
can be used to specify the decompression mode: single-threaded,
multi-threaded, percpu or the number of threads used for decompression.
When SQUASHFS_CHOICE_DECOMP_BY_MOUNT is not set, SQUASHFS_DECOMP_MULTI and
SQUASHFS_MOUNT_DECOMP_THREADS are both set, the "threads" option can also
be used to specify the number of threads used for decompression. This
mount option is only mentioned in fs/squashfs/Kconfig, which makes it
difficult to find.
Another mount option available is "errors", which can be configured to
panic the kernel when squashfs errors are encountered.
Add both these options to the squashfs documentation, making them more
noticeable.
Link: https://lkml.kernel.org/r/20231117161215.140282-1-amiculas@cisco.com
Signed-off-by: Ariel Miculas <amiculas@cisco.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ALLOW_ERROR_INJECTION macro (just like EXPORT_SYMBOL) can immediately
follow a function it annotates.
Link: https://lkml.kernel.org/r/20231109075147.2779461-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com> (maintainer:CHECKPATCH)
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> (reviewer:CHECKPATCH)
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
IA-64 was the only architecture which selected ARCH_TASK_STRUCT_ON_STACK.
IA-64 was removed with commit cf8e865810 ("arch: Remove Itanium (IA-64)
architecture"). Therefore remove support for ARCH_TASK_STRUCT_ON_STACK
as well.
Note: this also reveals a potential bug in powerpc code, which makes use of
__init_task_data without selecting ARCH_TASK_STRUCT_ON_STACK which makes
__init_task_data a no-op. This is broken since commit d11ed3ab31 ("Expand
INIT_TASK() in init/init_task.c and remove") from 2018 and needs to be
addressed separately.
Link: https://lkml.kernel.org/r/20231116133638.1636277-4-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
IA-64 was the only architecture which selected ARCH_TASK_STRUCT_ALLOCATOR.
IA-64 was removed with commit cf8e865810 ("arch: Remove Itanium (IA-64)
architecture"). Therefore remove support for ARCH_THREAD_STACK_ALLOCATOR
as well.
Link: https://lkml.kernel.org/r/20231116133638.1636277-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Remove unused code after IA-64 removal".
While looking into something different I noticed that there are a couple
of Kconfig options which were only selected by IA-64 and which are now
unused.
So remove them and simplify the code a bit.
This patch (of 3):
IA-64 was the only architecture which selected ARCH_THREAD_STACK_ALLOCATOR.
IA-64 was removed with commit cf8e865810 ("arch: Remove Itanium (IA-64)
architecture"). Therefore remove support for ARCH_THREAD_STACK_ALLOCATOR as
well.
Link: https://lkml.kernel.org/r/20231116133638.1636277-1-hca@linux.ibm.com
Link: https://lkml.kernel.org/r/20231116133638.1636277-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Using the new folio APIs saves seven hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20231114084436.2755-12-konishi.ryusuke@gmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the new folio APIs, saving 17 hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20231114084436.2755-11-konishi.ryusuke@gmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All callers now have a folio, so convert to pass a folio. No caller uses
the return value, so make it return void. Removes a couple of hidden
calls to compound_head().
Link: https://lkml.kernel.org/r/20231114084436.2755-10-konishi.ryusuke@gmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All callers of nilfs_clear_dirty_page() now have a folio, so rename the
function and pass in the folio. Saves three hidden calls to
compound_head().
Link: https://lkml.kernel.org/r/20231114084436.2755-9-konishi.ryusuke@gmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert the incoming page to a folio. Replaces three calls to
compound_head() with one.
Link: https://lkml.kernel.org/r/20231114084436.2755-8-konishi.ryusuke@gmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert the incoming page to a folio. Replaces three calls to
compound_head() with one.
Link: https://lkml.kernel.org/r/20231114084436.2755-7-konishi.ryusuke@gmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All callers of nilfs_page_buffers_clean() now have a folio, so convert it
to take a folio. While I'm at it, make it return a bool.
Link: https://lkml.kernel.org/r/20231114084436.2755-6-konishi.ryusuke@gmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Save two hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20231114084436.2755-5-konishi.ryusuke@gmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the new folio APIs, saving five calls to compound_head(). This
includes the last callers of nilfs_end_page_io(), so remove that too.
Link: https://lkml.kernel.org/r/20231114084436.2755-4-konishi.ryusuke@gmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the new folio APIs, saving five hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20231114084436.2755-3-konishi.ryusuke@gmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "nilfs2: Folio conversions for file paths".
This series advances page->folio conversions for a wide range of nilfs2,
including its file operations, block routines, and the log writer's
writeback routines. It doesn't cover large folios support, but it saves a
lot of hidden compound_head() calls while preserving the existing support
range behavior.
The original series in post [1] also covered directory-related page->folio
conversions, but that was put on hold because a regression was found in
testing, so this is an excerpt from the first half of the original post.
[1] https://lkml.kernel.org/r/20231106173903.1734114-1-willy@infradead.org
I tested this series in both 32-bit and 64-bit environments, switching
between normal and small block sizes. I also reviewed all changes in all
patches to ensure they do not break existing behavior. There were no
problems.
This patch (of 20):
This is the folio counterpart of the existing nilfs_end_page_io() which is
retained as a wrapper of nilfs_end_folio_io(). Replaces nine hidden calls
to compound_head() with one.
Link: https://lkml.kernel.org/r/20231114084436.2755-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20231114084436.2755-2-konishi.ryusuke@gmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ioctl.c utilizes memdup_user() to copy a userspace array. An overflow
check is performed manually before the function's invocation.
The new function memdup_array_user() standardizes copying userspace
arrays, thus, improving readability by making it more clear that an array
is being copied. Additionally, it also performs an overflow check.
Remove the (now redundant) manual overflow-check and replace memdup_user()
with memdup_array_user().
In addition, improve the grammar of the comment above
memdup_array_user().
Link: https://lkml.kernel.org/r/20231106224416.3055-1-konishi.ryusuke@gmail.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://lkml.kernel.org/r/20231103184831.99406-2-pstanner@redhat.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cosmetic, but imho it makes the usage look more clear and simple, the new
helper doesn't require to initialize "t".
After this change while_each_thread() has only 3 users, and it is only
used in the do/while loops.
Link: https://lkml.kernel.org/r/20231030155710.GA9095@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When kernel_can_power_off() returns false, and reboot has called with
LINUX_REBOOT_CMD_POWER_OFF, kernel_halt() will be initiated instead of
actual power off function.
However, in this situation, Kernel never explicitly notifies user that
system halted instead of requested power off.
Since halt and power off perform different behavior, and user initiated
reboot call with power off command, not halt, This could be unintended
behavior to user, like this:
~ # poweroff -f
[ 3.581482] reboot: System halted
Therefore, this explicitly notifies user that poweroff is not available,
and halting has been occured as an alternative behavior instead:
~ # poweroff -f
[ 4.123668] reboot: Power off not available: System halted instead
[akpm@linux-foundation.org: tweak comment text]
Link: https://lkml.kernel.org/r/20231104113320.72440-1-ldmldm05@gmail.com
Signed-off-by: Dongmin Lee <ldmldm05@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If nilfs2 reads a disk image with corrupted segment usage metadata, and
its segment usage information is marked as an error for the segment at the
write location, nilfs_sufile_set_segment_usage() can trigger WARN_ONs
during log writing.
Segments newly allocated for writing with nilfs_sufile_alloc() will not
have this error flag set, but this unexpected situation will occur if the
segment indexed by either nilfs->ns_segnum or nilfs->ns_nextnum (active
segment) was marked in error.
Fix this issue by inserting a sanity check to treat it as a file system
corruption.
Since error returns are not allowed during the execution phase where
nilfs_sufile_set_segment_usage() is used, this inserts the sanity check
into nilfs_sufile_mark_dirty() which pre-reads the buffer containing the
segment usage record to be updated and sets it up in a dirty state for
writing.
In addition, nilfs_sufile_set_segment_usage() is also called when
canceling log writing and undoing segment usage update, so in order to
avoid issuing the same kernel warning in that case, in case of
cancellation, avoid checking the error flag in
nilfs_sufile_set_segment_usage().
Link: https://lkml.kernel.org/r/20231205085947.4431-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+14e9f834f6ddecece094@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=14e9f834f6ddecece094
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit a08c7193e4 "mm/filemap: remove hugetlb special casing in
filemap.c", hugetlb pages are stored in the page cache in base page sized
indexes. This leads to multi index stores in the xarray which is only
supporting through CONFIG_XARRAY_MULTI. The other page cache user of
multi index stores ,THP, selects XARRAY_MULTI. Have CONFIG_HUGETLB_PAGE
follow this behavior as well to avoid the BUG() with a CONFIG_HUGETLB_PAGE
&& !CONFIG_XARRAY_MULTI config.
Link: https://lkml.kernel.org/r/20231204183234.348697-1-sidhartha.kumar@oracle.com
Fixes: a08c7193e4 ("mm/filemap: remove hugetlb special casing in filemap.c")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After the conversion to bus_to_subsys() and class_to_subsys(), the gdb
scripts listing the system buses and classes respectively was broken, fix
those by returning the subsys_priv pointer and have the various caller
de-reference either the 'bus' or 'class' structure members accordingly.
Link: https://lkml.kernel.org/r/20231130043317.174188-1-florian.fainelli@broadcom.com
Fixes: 7b884b7f24 ("driver core: class.c: convert to only use class_to_subsys")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
He is currently inactive (last message from him is two years ago [1]).
His media tree [2] is also dormant (latest activity is 6 years ago), yet
his site is still online [3].
Drop him from MAINTAINERS and add CREDITS entry for him. We thank him
for maintaining various DVB drivers.
[1]: https://lore.kernel.org/all/660772b3-0597-02db-ed94-c6a9be04e8e8@iki.fi/
[2]: https://git.linuxtv.org/anttip/media_tree.git/
[3]: https://palosaari.fi/linux/
Link: https://lkml.kernel.org/r/20231130083848.5396-1-bagasdotme@gmail.com
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Clang static checker complains that value stored to 'from' is never read.
And memcpy_from_folio() only copy the last chunk memory from folio to
destination. Use 'to += chunk' to replace 'from += chunk' to fix this
typo problem.
Link: https://lkml.kernel.org/r/20231130034017.1210429-1-suhui@nfschina.com
Fixes: b23d03ef7a ("highmem: add memcpy_to_folio() and memcpy_from_folio()")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When mounting a filesystem image with a block size larger than the page
size, nilfs2 repeatedly outputs long error messages with stack traces to
the kernel log, such as the following:
getblk(): invalid block size 8192 requested
logical block size: 512
...
Call Trace:
dump_stack_lvl+0x92/0xd4
dump_stack+0xd/0x10
bdev_getblk+0x33a/0x354
__breadahead+0x11/0x80
nilfs_search_super_root+0xe2/0x704 [nilfs2]
load_nilfs+0x72/0x504 [nilfs2]
nilfs_mount+0x30f/0x518 [nilfs2]
legacy_get_tree+0x1b/0x40
vfs_get_tree+0x18/0xc4
path_mount+0x786/0xa88
__ia32_sys_mount+0x147/0x1a8
__do_fast_syscall_32+0x56/0xc8
do_fast_syscall_32+0x29/0x58
do_SYSENTER_32+0x15/0x18
entry_SYSENTER_32+0x98/0xf1
...
This overloads the system logger. And to make matters worse, it sometimes
crashes the kernel with a memory access violation.
This is because the return value of the sb_set_blocksize() call, which
should be checked for errors, is not checked.
The latter issue is due to out-of-buffer memory being accessed based on a
large block size that caused sb_set_blocksize() to fail for buffers read
with the initial minimum block size that remained unupdated in the
super_block structure.
Since nilfs2 mkfs tool does not accept block sizes larger than the system
page size, this has been overlooked. However, it is possible to create
this situation by intentionally modifying the tool or by passing a
filesystem image created on a system with a large page size to a system
with a smaller page size and mounting it.
Fix this issue by inserting the expected error handling for the call to
sb_set_blocksize().
Link: https://lkml.kernel.org/r/20231129141547.4726-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
