If the drm_plane has a source width that's greater than the max width
supported by a single hw overlay, then we assign a 'r_overlay' to it in
omap_plane_atomic_check().
Both overlays should have the capabilities required to handle the source
framebuffer. The only parameters that vary between the left and right
hwoverlays are the src_w, crtc_w, src_x and crtc_x as we just even chop
the fb into left and right halves.
We also take care of not creating odd width size when dealing with YUV
formats.
Since both halves need to be 'appear' side by side the zpos is
recalculated when dealing with dual overlay cases so that the other
planes zpos is consistent.
Depending on user space usage it is possible that on occasion the number
of requested planes exceeds the numbers of overlays required to display
them. In that case a failure would be returned for the plane that cannot
be handled at that time. It is up to user space to make sure the H/W
resource are not over-subscribed.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-10-narmstrong@baylibre.com
Now that we added specific item to our subclassed drm_plane_state
we can add omap_plane_atomic_print_state() helper to dump out our own
driver specific plane state.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-9-narmstrong@baylibre.com
(re)assign the hw overlays to planes based on required caps, and to
handle situations where we could not modify an in-use plane.
This means all planes advertise the superset of formats and properties.
Userspace must (as always) use atomic TEST_ONLY step for atomic updates,
as not all planes may be available for use on every frame.
The mapping of hwoverlays to plane is stored in omap_global_state, so
that state updates are atomically committed in the same way that
plane/etc state updates are managed. This is needed because the
omap_plane_state keeps a pointer to the hwoverlay, and we don't want
global state to become out of sync with the plane state if an atomic
update fails, we hit deadlock/ backoff scenario, etc. The use of
global_state_lock keeps multiple parallel updates which both re-assign
hwoverlays properly serialized.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-8-narmstrong@baylibre.com
In preparation to add omap plane state specific extensions we need to
subclass drm_plane_state and add the relevant helpers.
The addition of specific extension will be done separately.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-6-narmstrong@baylibre.com
Split out the hardware overlay specifics from omap_plane.
To start, the hw overlays are statically assigned to planes.
The goal is to eventually assign hw overlays dynamically to planes
during plane->atomic_check() based on requested caps (scaling, YUV,
etc). And then perform hw overlay re-assignment if required.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-5-narmstrong@baylibre.com
We currently assume that an overlay has the same maximum width and
maximum height as the overlay manager. This assumption is incorrect. On
some variants the overlay manager maximum width is twice the maximum
width that the overlay can handle. We need to add the appropriate data
per variant as well as export a helper function to retrieve the data so
check can be made dynamically in omap_plane_atomic_check().
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-3-narmstrong@baylibre.com
Call drm_atomic_helper_check_plane_state() from the plane
atomic_check() callback in order to add plane state sanity
checking.
It will permit filtering out totally bad scaling factors, even
if the real check are done later in the atomic commit.
Calling drm_atomic_helper_check_plane_state() also sets
plane_state->visible which will be useful when dynamically
assigning hw overlays to planes.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-2-narmstrong@baylibre.com
I guess no one ever tried running omap together with lima or panfrost,
not even sure that's possible. Anyway for consistency, fix this.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tomi Valkeinen <tomba@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-12-daniel.vetter@ffwll.ch
Many drivers reference the plane->state pointer in order to get the
current plane state in their atomic_update or atomic_disable hooks,
which would be the new plane state in the global atomic state since
_swap_state happened when those hooks are run.
Use the drm_atomic_get_new_plane_state helper to get that state to make it
more obvious.
This was made using the coccinelle script below:
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)
@ adds_new_state @
identifier plane_atomic_func.func;
identifier plane, state;
identifier new_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state)
{
...
- struct drm_plane_state *new_state = plane->state;
+ struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
...
}
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.
The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.
Let's convert all the remaining helpers to provide a consistent
interface, starting with the planes atomic_check.
The conversion was done using the coccinelle script below plus some
manual changes for vmwgfx, built tested on all the drivers.
@@
identifier plane, plane_state;
symbol state;
@@
struct drm_plane_helper_funcs {
...
int (*atomic_check)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_check = func,
...,
};
@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier dev;
identifier plane, plane_state, state;
@@
f(struct drm_device *dev, struct drm_atomic_state *state)
{
<+...
- FUNCS->atomic_check(plane, plane_state)
+ FUNCS->atomic_check(plane, state)
...+>
}
@ ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
... when != new_plane_state
}
@ adds_new_state depends on plane_atomic_func && !ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
+ struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane);
...
}
@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *new_plane_state
+ struct drm_atomic_state *state
)
{ ... }
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
dispc_ops was created to help with the multi-module architecture and
giving us the possibility of multiple dispc implementations. Neither of
these is valid anymore, and we can remove dispc_ops and use direct
calls to dispc.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-54-tomi.valkeinen@ti.com
Adds support for COLOR_ENCODING and COLOR_RANGE properties to
omap_plane.c and dispc.c. The supported encodings and ranges are
presets are:
For COLOR_ENCODING:
- YCbCr BT.601 (default)
- YCbCr BT.709
For COLOR_RANGE:
- YCbCr limited range
- YCbCr full range (default)
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-6-tomi.valkeinen@ti.com
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713122859.34135-1-grandmaster@al2klimov.de
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Planes with identical zpos value will result undefined behavior:
disappearing planes, screen flickering and it is not supported by the
hardware.
Use normalized zpos to make sure that we don't encounter invalid
configuration.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321102029.15248-7-peter.ujfalusi@ti.com
This removes the need to access the global DISPC private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DISPC private data dynamically).
In order to allow the omapdrm side to call the dispc_ops with a DISPC
pointer, we also introduce a new function dss_get_dispc() to retrieve
the DISPC corresponding to the DSS.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The standard kernel integer types are [us]{8,16,32}. Use them instead of
the u?int{8,16,32}_t types.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Having the filename in the header serves little purpose and is
often wrong after renames as it is here in several places, just
drop it from all omapdrm files.
While we are here unify the copyright tags to the TI recommended style.
Signed-off-by: Andrew F. Davis <afd@ti.com>
This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.
This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.
v2: A minor addition from Daniel
v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)
v4: Minor comment adjustments (Liviu)
v5: Some new platforms added due to rebase
v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Change dispc driver to use the DRM_MODE_REFLECT flags instead of a mirror
boolean.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
At the moment the dispc driver uses a custom enum for rotation. Change
it to use the DRM's DRM_MODE_ROTATE_*.
Note that mirroring is at the moment handled as a separate boolean in
the dispc driver, so we only use the DRM_MODE_ROTATE_* values.
Note, DSS HW uses clockwise rotation, DRM counter-clockwise.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
struct omap_drm_window is only used to pass plane setup data to
omap_framebuffer_update_scanout(). This can as well be accomplished by
just passing the DRM state.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
We now get a fourcc array from dispc when asking for a plane's supported
pixel formats, so we can drop omap_framebuffer_get_formats() which was
used to convert between DSS and DRM pixel formats.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
We have three rotation methods supported by the SoCs with DSS: DMA,
VRFB and TILER.
DMA rotation works in theory on all DSS platforms, but in practice it's
unusable due to the huge amount of memory bandwidth it uses, and has
never really been used.
VRFB is available on OMAP3, but is not supported by omapdrm, even though
we have some code for it in the dispc driver.
TILER is supported on OMAP4/OMAP5/DRA7/AM5 platforms, but has some
driver bugs.
To clean up the driver to help fixing the TILER issues, this patch drops
the DMA and VRFB rotation support, leaving only TILER rotation.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
At the moment we have ovl_set_channel_out() to configure the output
channel of an overlay. It makes sense to have this configuration as part
of the rest of overlay configuration, and in DSS6+ we need the output
channel when doing the other overlay configuration.
This patch adds a 'channel' parameter to ovl_setup(), so that all
overlay configuration is done via the same function, and removes the
ovl_set_channel_out().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Create a standard zpos property for every plane as an alias to the
omapdrm-specific zorder property. Unlike the zorder property that has to
be instantiated for both planes and CRTCs due to backward compatibility,
the zpos property is only instantiated for planes. When userspace will
have switched to the zpos property the zorder property will be removed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The custom plane state only encapsulates the standard plane state with
adding any custom field. Remove it and use the atomic plane helpers
directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DRM core implements a standard "zpos" property to control planes
ordering. The omapdrm driver implements a similar property named
"zorder". Although we can't switch to DRM core handling of the "zpos"
property for backward compatibility reasons, we can store the zorder
value in the drm_plane_state zpos field, saving us from adding a custom
field to the plane state.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI
as a convenience.
Ideally the DRM_ROTATE_ and DRM_REFLECT_ property ids are looked up
through the atomic API, but realizing that userspace is likely to take
shortcuts and assume that the enum values are what is sent over the
wire.
As a result these defines are provided purely as a convenience to
userspace applications.
Changes since v3:
- Switched away from past tense in comments
- Add define name change to previously mis-spelled DRM_REFLECT_X comment
- Improved the comment for the DRM_MODE_REFLECT_<axis> comment
Changes since v2:
- Changed define prefix from DRM_MODE_PROP_ to DRM_MODE_
- Fix compilation errors
- Changed comment formatting
- Deduplicated comment lines
- Clarified DRM_MODE_PROP_REFLECT_ comment
Changes since v1:
- Moved defines from drm.h to drm_mode.h
- Changed define prefix from DRM_ to DRM_MODE_PROP_
- Updated uses of the defines to the new prefix
- Removed include from drm_rect.c
- Stopped using the BIT() macro
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170519205017.23307-2-robert.foss@collabora.com
Cleanup overly complex omap_modeset_init(). The function is trying to
support many unusual configuration, that have never been tested and
are not supported by other parts of the dirver.
After cleanup the init function creates exactly one connector,
encoder, crtc, and primary plane per each connected dss-device. Each
connector->encoder->crtc chain is expected to be separate and each
crtc is connect to a single dss-channel. If the configuration does not
match the expectations or exceeds the available resources, the
configuration is rejected.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Remove the obsolete "#define omap_plane _omap_plane" hack and other
related hacks to get around the enum omap_plane colliding with struct
omap_plane.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
DSS uses "replication logic" to convert color components from smaller
bit widths to bigger bit widths. Without replication logic, the color
component would be shifted and the least significant bits would be left
at 0, whereas with replication logic, the least significat bits will be
filled with the most significant bit.
For some reason omapdrm leaves replication logic always to off, which,
in the most common case, means that showing 16-bit RGB colors on 24-bit
display gives a bit darker colors than expected.
The reset value of the replication logic bit is enabled, and it should
always be set, as there's no practical reason to disable it. This patch
removes the option to disable it from omapdrm, and always sets it to
enabled in dispc.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Change omapdrm to get dispc_ops and use that to call the dispc functions
instead or direct function calls.
The change is very straightforward.
The only problem was in omap_crtc_init() which calls pipe2vbl(crtc), and
at that point of time the crtc->dev link, which is used to get the
dispc_ops, has not been set up yet. This patch makes omap_crtc_init()
skip the call to pipe2vbl() and instead calls
dispc_ops->mgr_get_vsync_irq() directly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omapdrm still uses a few non-dispc functions: dss_feat_get_num_mgrs(),
dss_feat_get_num_ovls() and dss_feat_get_supported_color_modes(). We
want to provide omapdrm a single dispc_ops function pointer struct so
that omapdrm will use either the current omapdss or the new omapdss6
driver depending on the platform.
Those three functions are really dispc functions, but are located in the
dss_features.c for legacy reasons.
This patch adds similar functionss to the dispc, and changes omapdrm to
use those new functions. Underneath the functions still call the
functions from dss_feature.c.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
As the FIFO underflow IRQ handler just prints an error message to the
kernel log, simplify the code by not registering one IRQ handler per
plane but print the messages directly from the main IRQ handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We set the possible_crtc for all planes to "(1 << priv->num_crtcs) - 1",
which is fine as the HW planes can be used fro all crtcs. However, when
we're doing that, we are still incrementing 'num_crtcs', and we'll end
up with bad possible_crtcs, preventing the use of the primary planes.
This patch passes a possible_crtcs mask to plane init function so that
we get correct possible_crtc.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omap_plane_atomic_update() does WARN_ON() if dispc rejects the given
plane config. Change that to dev_err() to lessen the possible spam.
To fix this correctly, the plane setup needs much more work by creating
a check function for dispc setup, so that we could reliably check the
config in atomic_check, instead of only noticing the problem when
programming dispc.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Clean up omap_plane_atomic_check() with:
- Check state->fb first. If no fb, return 0.
- use drm_atomic_get_existing_crtc_state() instead of
drm_atomic_get_crtc_state()
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
I sometimes see:
[drm:drm_framebuffer_remove [drm]] *ERROR* failed to reset crtc ed2a6c00
when fb was deleted: -22
which comes from drm_framebuffer_remove() when it's disabling the crtc
with zeroed drm_mode_set.
The problem in omap_plane_atomic_check() is that it will use those
zeroed fields to verify if the setup is correct.
This patch makes omap_plane_atomic_check() return 0 if the crtc is
disabled.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The global mode_config.rotation_property is going away, switch over to
per-plane rotation_property.
Not sure I got the annoying crtc rotation_property handling right.
Might work, or migth not.
v2: Drop the BIT()
Don't create rotation property twice for each primary plane
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
[danvet: Add comment per discussion between Tomi&Ville.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-8-git-send-email-ville.syrjala@linux.intel.com
0 isn't a valid rotation property value, so let's set the initial value
of the property to BIT(DRM_ROTATE_0) instead.
v2: Drop the BIT()
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-7-git-send-email-ville.syrjala@linux.intel.com
We have intel_rotation_90_or_270() in i915 to check if the rotation is
90 or 270 degrees. Similar checks are elsewhere in drm, so let's move
the helper into a central place and use it everwhere.
v2: Drop the BIT()
Convert all new intel_rotation_90_or_270() calls
Deal with superfluous code shuffling
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-2-git-send-email-ville.syrjala@linux.intel.com
The drivers have to modify the atomic plane state during the prepare_fb
callback so they track allocations, reservations and dependencies for
this atomic operation involving this fb. In particular, how else do we
set the plane->fence from the framebuffer!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818180017.20508-1-chris@chris-wilson.co.uk
