In xchk_iallocbt_rec, check the alignment of ir_startino by converting
the inode cluster block alignment into units of inodes instead of the
other way around (converting ir_startino to blocks). This prevents us
from tripping over off-by-one errors in ir_startino which are obscured
by the inode -> block conversion.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Make sure we never check more than XFS_INODES_PER_CHUNK inodes for any
given inobt record since there can be more than one inobt record mapped
to an inode cluster.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In xrep_findroot_block, we work out the btree type and correctness of a
given block by calling different btree verifiers on root block
candidates. However, we leave the NULL b_ops while ->verify_read
validates the block, which means that if the verifier calls
xfs_buf_verifier_error it'll crash on the null b_ops. Fix it to set
b_ops before calling the verifier and unsetting it if the verifier
fails.
Furthermore, improve the documentation around xfs_buf_ensure_ops, which
is the function that is responsible for cleaning up the b_ops state of
buffers that go through xrep_findroot_block but don't match anything.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Use __print_symbolic to print the scrub type in ftrace output.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Use __print_symbolic to print the btree type in ftrace output.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Use %pS instead of %pF in ftrace strings so that we record the actual
function address instead of the function descriptor.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
A big block filesystem might require more than one inobt record to cover
all the inodes in the block. In these cases it is not correct to round
the irec count up to the nearest block because this causes us to
overestimate the number of inode blocks we expect to find.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Store the inode cluster alignment information in units of inodes and
blocks in the mount data so that we don't have to keep recalculating
them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Store the number of inodes and blocks per inode cluster in the mount
data so that we don't have to keep recalculating them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add new helpers to convert units of fs blocks into inodes, and AG blocks
into AG inodes, respectively. Convert all the open-coded conversions
and XFS_OFFBNO_TO_AGINO(, , 0) calls to use them, as appropriate. The
OFFBNO_TO_AGINO macro is retained for xfs_repair.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Owner information for static fs metadata can be defined readonly at
build time because it never changes across filesystems. This enables us
to reduce stack usage (particularly in scrub) because we can use the
statically defined oinfo structures.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Only certain functions actually change the contents of an
xfs_owner_info; the rest can accept a const struct pointer. This will
enable us to save stack space by hoisting static owner info types to
be const global variables.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
We don't handle buffer state properly in online repair's findroot
routine. If a buffer already has b_ops set, we don't ever want to touch
that, and we don't want to call the read verifiers on a buffer that
could be dirty (CRCs are only recomputed during log checkpoints).
Therefore, be more careful about what we do with a buffer -- if someone
else already attached ops that are not the ones for this btree type,
just ignore the buffer. We only attach our btree type's buf ops if it
matches the magic/uuid and structure checks.
We also modify xfs_buf_read_map to allow callers to set buffer ops on a
DONE buffer with NULL ops so that repair doesn't leave behind buffers
which won't have buffers attached to them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In xrep_findroot_block, if we find a candidate root block with sibling
pointers or sibling blocks on the same tree level, we should not return
that block as a tree root because root blocks cannot have siblings.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The option to enable unwritten extents was made default in 2003,
removed from mkfs in 2007, and cannot be disabled in v5. We also
rely on it for a lot of common functionality, so filesystems without
it will run a completely untested and buggy code path. Enabling the
support also is a simple bit flip using xfs_db, so legacy file
systems can still be brought forward.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xchk_inode_flags2() currently treats any di_flags2 values that the
running kernel doesn't recognize as corruption, and calls
xchk_ino_set_corrupt() if they are set. However, it's entirely possible
that these flags were set in some newer kernel and are quite valid,
but ignored in this kernel.
(Validators don't care one bit about unknown di_flags2.)
Call xchk_ino_set_warning instead, because this may or may not actually
indicate a problem.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Remove duplicated include xfs_alloc.h
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Check the values we read in from the AG headers when calculating the
block reservations for a repair transaction. If they're obviously
wrong, substitute worst case assumptions (rather than ENOSPC on a bogus
reservation request).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Rebuild the AGI header items with some help from the rmapbt.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
As mentioned previously, the xrep_extent_list basically implements a
bitmap with two functions: set and disjoint union. Rename all these
functions to xfs_bitmap to shorten the name and make it more obvious
what we're doing.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Move the xrep_extent_list code into a separate file. Logically, this
data structure is really just a clumsy bitmap, and in the next patch
we'll make this more obvious. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Replace the IRELE macro with a proper function so that we can do proper
typechecking and so that we can stop open-coding iput in scrub, which
means that we'll be able to ftrace inode lifetimes going through scrub
correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Now that we've shortened everything, fix up all the indentation and
whitespace problems. There are no functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Shorten the name of the online fsck context structure. Whitespace
damage will be fixed by a subsequent patch. There are no functional
changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Shorten all the metadata repair xfs_repair_* symbols to xrep_.
Whitespace damage will be fixed by a subsequent patch. There are no
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Shorten all the metadata checking xfs_scrub_ prefixes to xchk_. After
this, the only xfs_scrub* symbols are the ones that pertain to both
scrub and repair. Whitespace damage will be fixed in a subsequent
patch. There are no functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Less trivial cleanups of the error argument to xfs_btree_del_cursor;
these require some minor code refactoring.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The error argument to xfs_btree_del_cursor already understands the
"nonzero for error" semantics, so remove pointless error testing in the
callers and pass it directly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The xfs_btree_cur.bc_private.a.dfops field is only ever initialized
by the refcountbt cursor init function. The only caller of that
function with a non-NULL dfops is from deferred completion context,
which already has attached to ->t_dfops.
In addition to that, the only actual reference of a.dfops is the
cursor duplication function, which means the field is effectively
unused.
Remove the dfops field from the bc_private.a union. Any future users
can acquire the dfops from the transaction. This patch does not
change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
New verification functions like xfs_verify_fsbno() and
xfs_verify_agino() are spread across multiple files and different
header files. They really don't fit cleanly into the places they've
been put, and have wider scope than the current header includes.
Move the type verifiers to a new file in libxfs (xfs-types.c) and
the prototypes to xfs_types.h where they will be visible to all the
code that uses the types.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove the verbose license text from XFS files and replace them
with SPDX tags. This does not change the license of any of the code,
merely refers to the common, up-to-date license files in LICENSES/
This change was mostly scripted. fs/xfs/Makefile and
fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected
and modified by the following command:
for f in `git grep -l "GNU General" fs/xfs/` ; do
echo $f
cat $f | awk -f hdr.awk > $f.new
mv -f $f.new $f
done
And the hdr.awk script that did the modification (including
detecting the difference between GPL-2.0 and GPL-2.0+ licenses)
is as follows:
$ cat hdr.awk
BEGIN {
hdr = 1.0
tag = "GPL-2.0"
str = ""
}
/^ \* This program is free software/ {
hdr = 2.0;
next
}
/any later version./ {
tag = "GPL-2.0+"
next
}
/^ \*\// {
if (hdr > 0.0) {
print "// SPDX-License-Identifier: " tag
print str
print $0
str=""
hdr = 0.0
next
}
print $0
next
}
/^ \* / {
if (hdr > 1.0)
next
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
next
}
/^ \*/ {
if (hdr > 0.0)
next
print $0
next
}
// {
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
}
END { }
$
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All the realtime allocation functions deal with space on the rtdev in
units of realtime extents. However, struct xfs_rtalloc_rec confusingly
uses the word 'block' in the name, even though they're really extents.
Fix the naming problem and fix all the unit handling problems in the two
existing users.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
If one of the backup superblocks is found to differ seriously from
superblock 0, write out a fresh copy from the in-core sb.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a helper routine to attach quota information to inodes that are
about to undergo repair. If that fails, we need to schedule a
quotacheck for the next mount but allow the corrupted metadata repair to
continue.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a helper function to help us recover btree roots from the rmap data.
Callers pass in a list of rmap owner codes, buffer ops, and magic
numbers. We iterate the rmap records looking for owner matches, and
then read the matching blocks to see if the magic number & uuid match.
If so, we then read-verify the block, and if that passes then we retain
a pointer to the block with the highest level, assuming that by the end
of the call we will have found the root. This will be used to reset the
AGF/AGI btree root fields during their rebuild procedures.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we've plumbed in the ability to construct a list of dead btree
blocks following a repair, add more helpers to dispose of them. This is
done by examining the rmapbt -- if the btree was the only owner we can
free the block, otherwise it's crosslinked and we can only remove the
rmapbt record.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add some helpers to assemble a list of fs block extents. Generally,
repair functions will iterate the rmapbt to make a list (1) of all
extents owned by the nominal owner of the metadata structure; then they
will iterate all other structures with the same rmap owner to make a
list (2) of active blocks; and finally we have a subtraction function to
subtract all the blocks in (2) from (1), with the result that (1) is now
a list of blocks that were owned by the old btree and must be disposed.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a pair of helper functions to allocate and initialize fresh btree
roots. The repair functions will use these as part of recreating
corrupted metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
For repairs, we need to reserve at least as many blocks as we think
we're going to need to rebuild the data structure, and we're going to
need some helpers to roll transactions while maintaining locks on the AG
headers so that other threads cannot wander into the middle of a repair.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Grab and hold the per-AG data across a scrub run whenever relevant.
This helps us avoid repeated trips through rcu and the radix tree
in the repair code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Plumb in the pieces necessary to make the "scrub" subfunction of
the scrub ioctl actually work. This means that we make the IFLAG_REPAIR
flag to the scrub ioctl actually do something, and we add an errortag
knob so that xfstests can force the kernel to rebuild a metadata
structure even if there's nothing wrong with it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
These tracepoints will be used to debug the online repair routines.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
This function is basically a generic AGFL block iterator, so promote it
to libxfs ahead of online repair wanting to use it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In normal operation, the XFS convention is to take an inode's iolock
and then allocate a transaction. However, when scrubbing parent inodes
this is inverted -- we allocated the transaction to do the scrub, and
now we're trying to grab the parent's iolock. This can lead to ABBA
deadlocks: some thread grabbed the parent's iolock and is waiting for
space for a transaction while our parent scrubber is sitting on a
transaction trying to get the parent's iolock.
Therefore, convert all iolock attempts to use trylock; if that fails,
they can use the existing mechanisms to back off and try again.
The ABBA deadlock didn't happen with a non-repair scrub because the
transactions don't reserve any space, but repair scrubs require
reservation in order to update metadata. However, any other concurrent
metadata update (e.g. directory create in the parent) could also induce
this deadlock with the parent scrubber.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The realtime bitmap and summary inodes live on the metadata device, so
we can scrub their data forks with the regular scrubbers.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Replace the quota scrubber's open-coded data fork scrubber with a
redirected call to the bmapbtd scrubber. This strengthens the quota
scrub to include all the cross-referencing that it does.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
If we've already decided that something is corrupt, we might as well
abort all the loops and exit as quickly as possible.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Secondary superblocks are rarely used, so create a helper to read a
given non-primary AG's superblock and ensure that it won't stick around
hogging memory.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Don't bother looking for cross-referencing problems if the metadata is
already corrupt or we've already found a cross-referencing problem.
Since we added a helper function for flags testing, convert existing
users to use it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Since the transaction allocation helper is about to become more complex,
move it to common.c and remove the redundant parameters.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Strengthen the btree block header checks to detect the number of records
being less than the btree type's minimum record count. Certain blocks
are allowed to violate this constraint -- specifically any btree block
at the top of the tree can have fewer than minrecs records.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
All scrub code runs in transaction context, which means that memory
allocations are automatically run in PF_MEMALLOC_NOFS context. It's
therefore unnecessary to pass in KM_NOFS to allocation routines, so
clean them all out.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor the quota scrubber to take the quotaofflock and grab the quota
inode in the setup function so that we can treat quota in the same
"scrub in the context of this inode" (i.e. sc->ip) manner as we treat
any other inode. We do have to drop the quota inode's ILOCK_EXCL to use
dqiterate, but since dquots have their own individual locks the ILOCK
wasn't helping us anyway.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Create a helper function to iterate all the dquots of a given type in
the system, and refactor the dquot scrub to use it. This will get more
use in the quota repair code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There's only one caller of DQNEXT and its semantics can be moved into a
separate function, so create the function and get rid of the flag.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In xfs_scrub_iallocbt_xref_rmap_inodes we're checking inodes against
rmap records, so we should use xfs_scrub_btree_xref_set_corrupt if we
encounter discrepancies here so that we know that it's a cross
referencing error, not necessarily a corruption in the inobt itself.
The userspace xfs_scrub program will try to repair outright corruptions
in the agi/inobt prior to phase 3 so that the inode scan will proceed.
If only a cross-referencing error is noted, the repair program defers
the repair attempt until it can check the other space metadata at least
once.
It is therefore essential that the inobt scrubber can correctly
distinguish between corruptions and "unable to cross-reference something
else with this inobt". The same reasoning applies to "xfs: record inode
buf errors as a xref error in inobt scrubber".
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
If a directory's parent inode pointer doesn't point to an inode, the
directory should be flagged as corrupt. Enable IGET_UNTRUSTED here so
that _iget will return -EINVAL if the inobt does not confirm that the
inode is present and allocated and we can flag the directory corruption.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Extent size hint validation is used by scrub to decide if there's an
error, and it will be used by repair to decide to remove the hint.
Since these use the same validation functions, move them to libxfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
During the inode btree scrubs we try to confirm the freemask bits
against the inode records. If the inode buffer read fails, this is a
cross-referencing error, not a corruption of the inode btree itself.
Use the xref_process_error call here. Found via core.version middlebit
fuzz in xfs/415.
The userspace xfs_scrub program will try to repair outright corruptions
in the agi/inobt prior to phase 3 so that the inode scan will proceed.
If only a cross-referencing error is noted, the repair program defers
the repair attempt until it can check the other space metadata at least
once.
It is therefore essential that the inobt scrubber can correctly
distinguish between corruptions and "unable to cross-reference something
else with this inobt".
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Now that we no longer do raw inode buffer scrubbing, the bp parameter is
no longer used anywhere we're dealing with an inode, so remove it and
all the useless NULL parameters that go with it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The inode scrubber tries to _iget the inode prior to running checks.
If that _iget call fails with corruption errors that's an automatic
fail, regardless of whether it was the inode buffer read verifier,
the ifork verifier, or the ifork formatter that errored out.
Therefore, get rid of the raw mode scrub code because it's not needed.
Found by trying to fix some test failures in xfs/379 and xfs/415.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When we're scanning an extent mapping inode fork, ensure that every rmap
record for this ifork has a corresponding bmbt record too. This
(mostly) provides the ability to cross-reference rmap records with bmap
data. The rmap scrubber cannot do the xref on its own because that
requires taking an ilock with the agf lock held, which violates our
locking order rules (inode, then agf).
Note that we only do this for forks that are in btree format due to the
increased complexity; or forks that should have data but suspiciously
have zero extents because the inode could have just had its iforks
zapped by the inode repair code and now we need to reclaim the old
extents.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Switch to a single interface for flushing the whole log, which gives
consistent trace point coverage, and removes the unused log_flushed
argument for the previous _xfs_log_force callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The AGFL size calculation is about to get more complex, so lets turn
the macro into a function first and remove the macro.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[darrick: forward port to newer kernel, simplify the helper]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Apparently different gcc versions have competing and
incompatible notions of how to initialize at declaration,
so just give up and fall back to the time-tested memset().
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Even if we can't use the inobt/finobt cursors to count the number of
inode btree blocks, we are never allowed to clobber the cursor of the
btree being checked, so don't do this. Found by fuzzing level = ones
in xfs/364.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fix all the inode number formats to be consistently (0x%llx) in all
trace point definitions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_bmbt_irec.br_blockcount is declared as xfs_filblks_t, which is an
unsigned 64-bit integer. Though the bmbt helpers will never set a value
larger than 2^21 (since the underlying on-disk extent record has a
length field that is only 21 bits wide), we should be a little defensive
about checking that a bmbt record doesn't exceed what we're expecting or
overflow into the next AG.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In xfs_scrub_dir_rec, we must walk through the directory block entries
to arrive at the offset given by the hash structure. If we blindly
trust the hash address, we can end up midway into a directory entry and
stray outside the block. Found by lastbit fuzzing lents[3].address in
xfs/390 with KASAN enabled.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Don't iunlock an unlocked inode, which can happen if the parent pointer
scrubber bails out with sc->ip unlocked while trying to grab the parent
directory inode.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Whenever we load a buffer, explicitly re-call the structure verifier to
ensure that memory isn't corrupting things.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Use an inode's block mappings to cross-reference inode block counters.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
While we're scrubbing various btrees, cross-reference the records
with the other metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
During metadata btree scrub, we should cross-reference with the
reference counts.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Cross reference the refcount data with the rmap data to check that the
number of rmaps for a given block match the refcount of that block, and
that CoW blocks (which are owned entirely by the refcountbt) are tracked
as well.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
When scrubbing various btrees, we should cross-reference the records
with the reverse mapping btree and ensure that traversing the btree
finds the same number of blocks that the rmapbt thinks are owned by
that btree.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Cross-reference the inode btrees with the other metadata when we
scrub the filesystem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Scrub should make sure that each bnobt record has a corresponding
cntbt record.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
When we're scrubbing various btrees, cross-reference the records with
the bnobt to ensure that we don't also think the space is free.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Create some stubs that will be used to cross-reference metadata records.
The actual cross-referencing will be filled in by subsequent patches.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
When scanning a metadata btree block, cross-reference the block location
with the free space btree and the reverse mapping btree to ensure that
the rmapbt knows about the block and the bnobt does not. Add a
mechanism to defer checks when we happen to be scanning the bnobt/rmapbt
itself because it's less efficient to repeatedly clone and destroy the
cursor.
This patch provides the framework to make btree block owner checks
happen; the actual meat will be added in subsequent patches.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
There are a few places where we make a libxfs api call on behalf of some
object other than the one we're scrubbing but inadvertently call the
regular process_error function. When this happens we mark the object
corrupt even though it was corruption in /some other/ object that
actually produced the -EFSCORRUPTED code. The correct output flag for
these situations is SCRUB_OFLAG_XFAIL, not SCRUB_OFLAG_CORRUPT, so fix
this now that we also have a helper to set these.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Create some helper functions that we'll use later to deal with problems
we might encounter while cross referencing metadata with other metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Use the %pS instead of the %pF printk format specifier for printing
symbols from direct addresses. This is needed for the ia64, ppc64 and
parisc64 architectures.
While we're at it, be consistent with the capitalization of the 'S'.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If a malicious filesystem image contains a block+ format directory
wherein the directory inode's core.mode is set such that
S_ISDIR(core.mode) == 0, and if there are subdirectories of the
corrupted directory, an attempt to traverse up the directory tree will
crash the kernel in __xfs_dir3_data_check. Running the online scrub's
parent checks will tend to do this.
The crash occurs because the directory inode's d_ops get set to
xfs_dir[23]_nondir_ops (it's not a directory) but the parent pointer
scrubber's indiscriminate call to xfs_readdir proceeds past the ASSERT
if we have non fatal asserts configured.
Fix the null pointer dereference crash in __xfs_dir3_data_check by
looking for S_ISDIR or wrong d_ops; and teach the parent scrubber
to bail out if it is fed a non-directory "parent".
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Modify each function that checks the contents of a metadata buffer to
return the instruction address of the failing test so that we can report
more precise failure errors to the log.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In xfs_scrub_get_inode, we don't do a good enough job distinguishing
EINVAL returns from xfs_iget w/ IGET_UNTRUSTED -- this can happen if the
passed in inode number is invalid (past eofs, inobt says it isn't an
inode) or if the inum is actually valid but the inode buffer fails
verifier. In the first case we still want to return ENOENT, but in the
second case we want to capture the corruption error.
Therefore, if xfs_iget returns EINVAL, try the raw imap lookup. If that
succeeds, we conclude it's a corruption error, otherwise we just bounce
out to userspace.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Always allocate a transaction for inode scrubbing, even if the _iget
fails. This is something that is nice to have now for consistency with
the other scrubbers but will become critical when we get to online
repair where we'll actually use the transaction + raw buffer read to fix
the verifier errors.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Refactor xfs_scrub_bmap to use for_each_xfs_iext now that it exists.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The superblock validation routines return a variety of error codes to
reject a mount request. For scrub we can assume that the mount
succeeded, so if we see these things appear when scrubbing secondary sb
X, we can treat them all like corruption.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In xfs_scrub_ag_read_headers, if we're not scrubbing the AGFL but
hit a read error reading the AGFL, we should reset the error code
so that it doesn't propagate up into the caller.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Check that the nanosecond fields in each timestamp aren't larger
than a billion.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
There were ad-hoc checks for some scrub types but not others;
mark each scrub type with ... it's type, and use that to validate
the allowed and/or required input fields.
Moving these checks out of xfs_scrub_setup_ag_header makes it
a thin wrapper, so unwrap it in the process.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
[darrick: add xfs_ prefix to enum, check scrub args after checking type]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Do this before adding more core checks.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
An implicit mapping to type by order of initialization seems
error-prone, and doesn't lend itself to cscope-ing.
Also add sanity checks about size of array vs. max types,
and a defensive check that ->scrub exists before using it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since we've used up all the bits in i_mode, the existing mode check
doesn't actually do anything useful. However, we've not used all the
bit values in the format portion of i_mode, so we /do/ need to test
that for bad values.
Fixes: 80e4e1268 ("xfs: scrub inodes")
Fixes-coverity-id: 1423992
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
It's only used for tracepoints so it's relatively harmless,
but the offset is calculated incorrectly in xfs_scrub_quota_item.
qi_dqperchunk is the nr. of dquots per "chunk" which we have
conveniently *cough* defined to always be 1 FSB. Therefore
block_offset * qi_dqperchunk == first id in that chunk,
and so offset = id / qi_dqperchunk
id * dqperchunk is ... meaningless.
Fixes-coverity-id: 1423965
Fixes: c2fc338c ("xfs: scrub quota information")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
On the first pass through the while(1) loop, we get to
xfs_scrub_should_terminate() which can test the uninitialized
error variable.
Fixes-coverity-id: 1423737
Fixes: c2fc338c ("xfs: scrub quota information")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Make sure we don't list a block twice in the agfl by copying the
contents of the AGFL to an array, sorting it, and looking for
duplicates. We can easily check that the number of agfl entries we see
actually matches the flcount, so do that too.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
It turns out that we only started zeroing a new da btree node's block
header on v5 filesystems. Prior to that, we just wouldn't set anything
at all, which means that the pad field never got set and would retain
whatever happened to be in memory.
Therefore, we can only check the pad for zeroness on v5 filesystems.
shared/006 on a v4 filesystem exposes this scrub bug.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The btree scrubber has some custom code to retrieve and check a btree
block via xfs_btree_lookup_get_block. This function will either return
an error code (verifiers failed) or a *pblock will be untouched (bad
pointer). Since we previously set *pblock to NULL, we need to check
*pblock, not pblock, to trigger the early bailout.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Fix smatch complaints about uninitialized return codes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
There are two ways to scrub an inode -- calling xfs_iget and checking
the raw inode core, or by loading the inode cluster buffer and checking
the on-disk contents directly. The second method is only useful if
_iget fails the verifiers; when this is the case, sc->ip is NULL and
calling the tracepoint will cause a system crash.
Therefore, pass the raw inode number directly into the _preen and
_warning functions.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
In a directory data block, the zeroth bestfree item must point to the
longest free space. Therefore, when we check the bestfree block's
records against the data blocks, we only need to compare with bf[0] and
don't need the loop.
The weird loop was most probably the result of an earlier refactoring
gone bad.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
[darrick: fix broken initializer in xfs_scrub_xattr]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the current linear list and the indirection array for the in-core
extent list with a b+tree to avoid the need for larger memory allocations
for the indirection array when lots of extents are present. The current
extent list implementations leads to heavy pressure on the memory
allocator when modifying files with a high extent count, and can lead
to high latencies because of that.
The replacement is a b+tree with a few quirks. The leaf nodes directly
store the extent record in two u64 values. The encoding is a little bit
different from the existing in-core extent records so that the start
offset and length which are required for lookups can be retreived with
simple mask operations. The inner nodes store a 64-bit key containing
the start offset in the first half of the node, and the pointers to the
next lower level in the second half. In either case we walk the node
from the beginninig to the end and do a linear search, as that is more
efficient for the low number of cache lines touched during a search
(2 for the inner nodes, 4 for the leaf nodes) than a binary search.
We store termination markers (zero length for the leaf nodes, an
otherwise impossible high bit for the inner nodes) to terminate the key
list / records instead of storing a count to use the available cache
lines as efficiently as possible.
One quirk of the algorithm is that while we normally split a node half and
half like usual btree implementations we just spill over entries added at
the very end of the list to a new node on its own. This means we get a
100% fill grade for the common cases of bulk insertion when reading an
inode into memory, and when only sequentially appending to a file. The
downside is a slightly higher chance of splits on the first random
insertions.
Both insert and removal manually recurse into the lower levels, but
the bulk deletion of the whole tree is still implemented as a recursive
function call, although one limited by the overall depth and with very
little stack usage in every iteration.
For the first few extents we dynamically grow the list from a single
extent to the next powers of two until we have a first full leaf block
and that building the actual tree.
The code started out based on the generic lib/btree.c code from Joern
Engel based on earlier work from Peter Zijlstra, but has since been
rewritten beyond recognition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add a new xfs_iext_cursor structure to hide the direct extent map
index manipulations. In addition to the existing lookup/get/insert/
remove and update routines new primitives to get the first and last
extent cursor, as well as moving up and down by one extent are
provided. Also new are convenience to increment/decrement the
cursor and retreive the new extent, as well as to peek into the
previous/next extent without updating the cursor and last but not
least a macro to iterate over all extents in a fork.
[darrick: rename for_each_iext to for_each_xfs_iext]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The newly added xfs_scrub_da_btree_block() function has one code path
that returns the 'error' variable without initializing it first, as
shown by this compiler warning:
fs/xfs/scrub/dabtree.c: In function 'xfs_scrub_da_btree_block':
fs/xfs/scrub/dabtree.c:462:9: error: 'error' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Return zero since the caller will exit the scrub code if we don't produce a
buffer pointer.
Fixes: 7c4a07a424 ("xfs: scrub directory/attribute btrees")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
As we walk the attribute btree, explicitly check the structure of the
attribute leaves to make sure the pointers make sense and the freemap is
sensible.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
When we're done checking all the records/keys in a btree block, compute
the low and high key of the block and compare them to the associated key
in the parent btree block.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Perform some quick sanity testing of the disk quota information.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Perform simple tests of the realtime bitmap and summary.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Scrub parent pointers, sort of. For directories, we can ride the
'..' entry up to the parent to confirm that there's at most one
dentry that points back to this directory.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Create the infrastructure to scrub symbolic link data.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Scrub the hash tree, keys, and values in an extended attribute structure.
Refactor the attribute code to use the transaction if the caller supplied
one to avoid buffer deadocks.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Check the free space information in a directory.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Scrub the hash tree and all the entries in a directory.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Provide a way to check the shape and scrub the hashes and records
in a directory or extended attribute btree. These are helper functions
for the directory & attribute scrubbers in subsequent patches.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
[fengguang: remove unneeded variable to store return value]
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Scrub an individual inode's block mappings to make sure they make sense.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Plumb in the pieces necessary to check the refcount btree. If rmap is
available, check the reference count by performing an interval query
against the rmapbt.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Check the reverse mapping records to make sure that the contents
make sense.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Check the records of the inode btrees to make sure that the values
make sense given the inode records themselves.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Check the extent records free space btrees to ensure that the values
look sane.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a forgotten check to the AGI verifier, then wire up the scrub
infrastructure to check the AGI contents.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Check the block references in the AGF and AGFL headers to make sure
they make sense.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Ensure that the geometry presented in the backup superblocks matches
the primary superblock so that repair can recover the filesystem if
that primary gets corrupted.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add some helpers to enable us to lock an AG's headers, create btree
cursors for all btrees in that allocation group, and clean up
afterwards.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add to the btree scrubber the ability to check that the keys and
records are in the right order and actually call out to our record
iterator to do actual checking of the records.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Create a function that can check the shape of a btree -- each block
passes basic inspection and all the pointers look ok. In the next patch
we'll add the ability to check the actual keys and records stored within
the btree. Add some helper functions so that we report detailed scrub
errors in a uniform manner in dmesg. These are helper functions for
subsequent patches.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Create helper functions and tracepoints to deal with errors while
scrubbing a metadata btree.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Create helper functions to record crc and corruption problems, and
deal with any other runtime errors that arise.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Create a probe scrubber with id 0. This will be used by xfs_scrub to
probe the kernel's abilities to scrub (and repair) the metadata. We do
this by validating the ioctl inputs from userspace, preparing the
filesystem for a scrub (or a repair) operation, and immediately
returning to userspace. Userspace can use the returned errno and
structure state to decide (in broad terms) if scrub/repair are
supported by the running kernel.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Create structures needed to hold scrubbing context and dispatch incoming
commands to the individual scrubbers.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Create an ioctl that can be used to scrub internal filesystem metadata.
The new ioctl takes the metadata type, an (optional) AG number, an
(optional) inode number and generation, and a flags argument. This will
be used by the upcoming XFS online scrub tool.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
