Add test case to enusre that the caller and callee's fp offsets are
correct during tail call (mainly asserting for arm64 JIT).
Tested on both big-endian and little-endian arm64 qemu, result:
test_bpf: Summary: 1026 PASSED, 0 FAILED, [1014/1014 JIT'ed]
test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed]
test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220321152852.2334294-6-xukuohai@huawei.com
In the current code, the actual max tail call count is 33 which is greater
than MAX_TAIL_CALL_CNT (defined as 32). The actual limit is not consistent
with the meaning of MAX_TAIL_CALL_CNT and thus confusing at first glance.
We can see the historical evolution from commit 04fd61ab36 ("bpf: allow
bpf programs to tail-call other bpf programs") and commit f9dabe016b
("bpf: Undo off-by-one in interpreter tail call count limit"). In order
to avoid changing existing behavior, the actual limit is 33 now, this is
reasonable.
After commit 874be05f52 ("bpf, tests: Add tail call test suite"), we can
see there exists failed testcase.
On all archs when CONFIG_BPF_JIT_ALWAYS_ON is not set:
# echo 0 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
# dmesg | grep -w FAIL
Tail call error path, max count reached jited:0 ret 34 != 33 FAIL
On some archs:
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
# dmesg | grep -w FAIL
Tail call error path, max count reached jited:1 ret 34 != 33 FAIL
Although the above failed testcase has been fixed in commit 18935a72eb
("bpf/tests: Fix error in tail call limit tests"), it would still be good
to change the value of MAX_TAIL_CALL_CNT from 32 to 33 to make the code
more readable.
The 32-bit x86 JIT was using a limit of 32, just fix the wrong comments and
limit to 33 tail calls as the constant MAX_TAIL_CALL_CNT updated. For the
mips64 JIT, use "ori" instead of "addiu" as suggested by Johan Almbladh.
For the riscv JIT, use RV_REG_TCC directly to save one register move as
suggested by Björn Töpel. For the other implementations, no function changes,
it does not change the current limit 33, the new value of MAX_TAIL_CALL_CNT
can reflect the actual max tail call count, the related tail call testcases
in test_bpf module and selftests can work well for the interpreter and the
JIT.
Here are the test results on x86_64:
# uname -m
x86_64
# echo 0 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_suite=test_tail_calls
# dmesg | tail -1
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [0/8 JIT'ed]
# rmmod test_bpf
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_suite=test_tail_calls
# dmesg | tail -1
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [8/8 JIT'ed]
# rmmod test_bpf
# ./test_progs -t tailcalls
#142 tailcalls:OK
Summary: 1/11 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/1636075800-3264-1-git-send-email-yangtiezhu@loongson.cn
After commit 9298e63eaf ("bpf/tests: Add exhaustive tests of ALU
operand magnitudes"), when modprobe test_bpf.ko with JIT on mips64,
there exists segment fault due to the following reason:
[...]
ALU64_MOV_X: all register value magnitudes jited:1
Break instruction in kernel code[#1]
[...]
It seems that the related JIT implementations of some test cases
in test_bpf() have problems. At this moment, I do not care about
the segment fault while I just want to verify the test cases of
tail calls.
Based on the above background and motivation, add the following
module parameter test_suite to the test_bpf.ko:
test_suite=<string>: only the specified test suite will be run, the
string can be "test_bpf", "test_tail_calls" or "test_skb_segment".
If test_suite is not specified, but test_id, test_name or test_range
is specified, set 'test_bpf' as the default test suite. This is useful
to only test the corresponding test suite when specifying the valid
test_suite string.
Any invalid test suite will result in -EINVAL being returned and no
tests being run. If the test_suite is not specified or specified as
empty string, it does not change the current logic, all of the test
cases will be run.
Here are some test results:
# dmesg -c
# modprobe test_bpf
# dmesg | grep Summary
test_bpf: Summary: 1009 PASSED, 0 FAILED, [0/997 JIT'ed]
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [0/8 JIT'ed]
test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED
# rmmod test_bpf
# dmesg -c
# modprobe test_bpf test_suite=test_bpf
# dmesg | tail -1
test_bpf: Summary: 1009 PASSED, 0 FAILED, [0/997 JIT'ed]
# rmmod test_bpf
# dmesg -c
# modprobe test_bpf test_suite=test_tail_calls
# dmesg
test_bpf: #0 Tail call leaf jited:0 21 PASS
[...]
test_bpf: #7 Tail call error path, index out of range jited:0 32 PASS
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [0/8 JIT'ed]
# rmmod test_bpf
# dmesg -c
# modprobe test_bpf test_suite=test_skb_segment
# dmesg
test_bpf: #0 gso_with_rx_frags PASS
test_bpf: #1 gso_linear_no_head_frag PASS
test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED
# rmmod test_bpf
# dmesg -c
# modprobe test_bpf test_id=1
# dmesg
test_bpf: test_bpf: set 'test_bpf' as the default test_suite.
test_bpf: #1 TXA jited:0 54 51 50 PASS
test_bpf: Summary: 1 PASSED, 0 FAILED, [0/1 JIT'ed]
# rmmod test_bpf
# dmesg -c
# modprobe test_bpf test_suite=test_bpf test_name=TXA
# dmesg
test_bpf: #1 TXA jited:0 54 50 51 PASS
test_bpf: Summary: 1 PASSED, 0 FAILED, [0/1 JIT'ed]
# rmmod test_bpf
# dmesg -c
# modprobe test_bpf test_suite=test_tail_calls test_range=6,7
# dmesg
test_bpf: #6 Tail call error path, NULL target jited:0 41 PASS
test_bpf: #7 Tail call error path, index out of range jited:0 32 PASS
test_bpf: test_tail_calls: Summary: 2 PASSED, 0 FAILED, [0/2 JIT'ed]
# rmmod test_bpf
# dmesg -c
# modprobe test_bpf test_suite=test_skb_segment test_id=1
# dmesg
test_bpf: #1 gso_linear_no_head_frag PASS
test_bpf: test_skb_segment: Summary: 1 PASSED, 0 FAILED
By the way, the above segment fault has been fixed in the latest bpf-next
tree which contains the mips64 JIT rework.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/bpf/1635384321-28128-1-git-send-email-yangtiezhu@loongson.cn
This patch adds new tests for the two-instruction LD_IMM64. The new tests
verify the operation with immediate values of different byte patterns.
Mainly intended to cover JITs that want to be clever when loading 64-bit
constants.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211007143006.634308-1-johan.almbladh@anyfinetworks.com
This patch adds a set of tests of BPF_LDX_MEM where both operand registers
are the same register. Mainly testing 32-bit JITs that may load a 64-bit
value in two 32-bit loads, and must not overwrite the address register.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-11-johan.almbladh@anyfinetworks.com
This patch adds a tests of ALU32 and ALU64 LSH/RSH/ARSH operations for the
case when the two operands are the same register. Mainly intended to test
JITs that implement ALU64 shifts with 32-bit CPU instructions.
Also renamed related helper functions for consistency with the new tests.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-10-johan.almbladh@anyfinetworks.com
This patch replaces the current register combination test with new
exhaustive tests. Before, only a subset of register combinations was
tested for ALU64 DIV. Now, all combinatons of operand registers are
tested, including the case when they are the same, and for all ALU32
and ALU64 operations.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-8-johan.almbladh@anyfinetworks.com
This patch moves the ALU LSH/RSH/ARSH reference computations into the
common reference value function. Also fix typo in constants so they
now have the intended values.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-7-johan.almbladh@anyfinetworks.com
This patch expands the register-clobbering-during-function-call tests
to cover more all ALU32/64 MUL, DIV and MOD operations and all ATOMIC
operations. In short, if a JIT implements a complex operation with
a call to an external function, it must make sure to save and restore
all its caller-saved registers that may be clobbered by the call.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-6-johan.almbladh@anyfinetworks.com
This patch adds tests to check that the source register is preserved when
zero-extending a 32-bit value. In particular, it checks that the source
operand is not zero-extended in-place.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-5-johan.almbladh@anyfinetworks.com
This patch adds a series of test to verify the operation of BPF_ATOMIC
with BPF_DW and BPF_W sizes, for all power-of-two magnitudes of the
register value operand.
Also fixes a confusing typo in the comment for a related test.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-4-johan.almbladh@anyfinetworks.com
This patch updates the existing tests of BPF_ATOMIC operations to verify
that a 32-bit register operand is properly zero-extended. In particular,
it checks the operation on archs that require 32-bit operands to be
properly zero-/sign-extended or the result is undefined, e.g. MIPS64.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-3-johan.almbladh@anyfinetworks.com
This patch adds a series of tests to verify the behavior of BPF_LDX and
BPF_STX with BPF_B//W sizes in isolation. In particular, it checks that
BPF_LDX zero-extendeds the result, and that BPF_STX does not overwrite
adjacent bytes in memory.
BPF_ST and operations on BPF_DW size are deemed to be sufficiently
tested by existing tests.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-2-johan.almbladh@anyfinetworks.com
In order to keep ahead of cases in the kernel where Control Flow
Integrity (CFI) may trip over function call casts, enabling
-Wcast-function-type is helpful. To that end, BPF_CAST_CALL causes
various warnings and is one of the last places in the kernel triggering
this warning.
Most places using BPF_CAST_CALL actually just want a void * to perform
math on. It's not actually performing a call, so just use a different
helper to get the void *, by way of the new BPF_CALL_IMM() helper, which
can clean up a common copy/paste idiom as well.
This change results in no object code difference.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://github.com/KSPP/linux/issues/20
Link: https://lore.kernel.org/lkml/CAEf4Bzb46=-J5Fxc3mMZ8JQPtK1uoE0q6+g6WPz53Cvx=CBEhw@mail.gmail.com
Link: https://lore.kernel.org/bpf/20210928230946.4062144-2-keescook@chromium.org
This patch adds a tail call limit test where the program also emits
a BPF_CALL to an external function prior to the tail call. Mainly
testing that JITed programs preserve its internal register state, for
example tail call count, across such external calls.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-15-johan.almbladh@anyfinetworks.com
This patch fixes an error in the tail call limit test that caused the
test to fail on for x86-64 JIT. Previously, the register R0 was used to
report the total number of tail calls made. However, after a tail call
fall-through, the value of the R0 register is undefined. Now, all tail
call error path tests instead use context state to store the count.
Fixes: 874be05f52 ("bpf, tests: Add tail call test suite")
Reported-by: Paul Chaignon <paul@cilium.io>
Reported-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-14-johan.almbladh@anyfinetworks.com
This patch adds tests of the high 32 bits of 64-bit BPF_END conversions.
It also adds a mirrored set of tests where the source bytes are reversed.
The MSB of each byte is now set on the high word instead, possibly
affecting sign-extension during conversion in a different way. Mainly
for JIT testing.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-13-johan.almbladh@anyfinetworks.com
This patch expands the branch conversion test introduced by 66e5eb84
("bpf, tests: Add branch conversion JIT test"). The test now includes
a JMP with maximum eBPF offset. This triggers branch conversion for the
64-bit MIPS JIT. Additional variants are also added for cases when the
branch is taken or not taken.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-12-johan.almbladh@anyfinetworks.com
This patch adds a set of tests for JMP and JMP32 operations where the
branch decision is know at JIT time. Mainly testing JIT behaviour.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-11-johan.almbladh@anyfinetworks.com
This patch adds a set of tests for JMP to verify that the JITed jump
offset is calculated correctly. We pretend that the verifier has inserted
any zero extensions to make the jump-over operations JIT to one
instruction each, in order to control the exact JITed jump offset.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-10-johan.almbladh@anyfinetworks.com
This patch adds a new flag to indicate that the verified did insert
zero-extensions, even though the verifier is not being run for any
of the tests.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-9-johan.almbladh@anyfinetworks.com
This patch adds a test for the 64-bit immediate load, a two-instruction
operation, to verify correctness for all possible magnitudes of the
immediate operand. Mainly intended for JIT testing.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-8-johan.almbladh@anyfinetworks.com
This patch adds a new type of jump test where the program jumps forwards
and backwards with increasing offset. It mainly tests JITs where a
relative jump may generate different JITed code depending on the offset
size, read MIPS.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-7-johan.almbladh@anyfinetworks.com
This patch adds a set of tests for conditional JMP and JMP32 operations to
verify correctness for all possible magnitudes of the immediate and
register operands. Mainly intended for JIT testing.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-6-johan.almbladh@anyfinetworks.com
This patch adds a set of tests for ALU64 and ALU32 arithmetic and bitwise
logical operations to verify correctness for all possible magnitudes of
the register and immediate operands. Mainly intended for JIT testing.
The patch introduces a pattern generator that can be used to drive
extensive tests of different kinds of operations. It is parameterized
to allow tuning of the operand combinations to test.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-5-johan.almbladh@anyfinetworks.com
This patch adds a set of tests for ALU64 and ALU32 shift operations to
verify correctness for all possible values of the shift value. Mainly
intended for JIT testing.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-4-johan.almbladh@anyfinetworks.com
The test suite used to call any fill_helper callbacks to generate eBPF
program data for all test cases at once. This caused ballooning memory
requirements as more extensive test cases were added. Now the each
fill_helper is called before the test is run and the allocated memory
released afterwards, before the next test case is processed.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-3-johan.almbladh@anyfinetworks.com
This patch allows a test cast to specify the number of runs to use. For
compatibility with existing test case definitions, the default value 0
is interpreted as MAX_TESTRUNS.
A reduced number of runs is useful for complex test programs where 1000
runs may take a very long time. Instead of reducing what is tested, one
can instead reduce the number of times the test is run.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210914091842.4186267-2-johan.almbladh@anyfinetworks.com
Turn BPF_PROG_RUN into a proper always inlined function. No functional and
performance changes are intended, but it makes it much easier to understand
what's going on with how BPF programs are actually get executed. It's more
obvious what types and callbacks are expected. Also extra () around input
parameters can be dropped, as well as `__` variable prefixes intended to avoid
naming collisions, which makes the code simpler to read and write.
This refactoring also highlighted one extra issue. BPF_PROG_RUN is both
a macro and an enum value (BPF_PROG_RUN == BPF_PROG_TEST_RUN). Turning
BPF_PROG_RUN into a function causes naming conflict compilation error. So
rename BPF_PROG_RUN into lower-case bpf_prog_run(), similar to
bpf_prog_run_xdp(), bpf_prog_run_pin_on_cpu(), etc. All existing callers of
BPF_PROG_RUN, the macro, are switched to bpf_prog_run() explicitly.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-2-andrii@kernel.org
While BPF_CALL instructions were tested implicitly by the cBPF-to-eBPF
translation, there has not been any tests for BPF_TAIL_CALL instructions.
The new test suite includes tests for tail call chaining, tail call count
tracking and error paths. It is mainly intended for JIT development and
testing.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-15-johan.almbladh@anyfinetworks.com
Tests for BPF_CMPXCHG with both word and double word operands. As with
the tests for other atomic operations, these tests only check the result
of the arithmetic operation. The atomicity of the operations is not tested.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-14-johan.almbladh@anyfinetworks.com
Tests for each atomic arithmetic operation and BPF_XCHG, derived from
old BPF_XADD tests. The tests include BPF_W/DW and BPF_FETCH variants.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-13-johan.almbladh@anyfinetworks.com
Some JITs may need to convert a conditional jump instruction to
to short PC-relative branch and a long unconditional jump, if the
PC-relative offset exceeds offset field width in the CPU instruction.
This test triggers such branch conversion on the 32-bit MIPS JIT.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210809091829.810076-11-johan.almbladh@anyfinetworks.com
A double word (64-bit) load/store may be implemented as two successive
32-bit operations, one for each word. Check that the order of those
operations is consistent with the machine endianness.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-10-johan.almbladh@anyfinetworks.com
32-bit JITs may implement complex ALU64 instructions using function calls.
The new tests check aspects related to this, such as register clobbering
and register argument re-ordering.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210809091829.810076-9-johan.almbladh@anyfinetworks.com
This patch adds BPF_MUL tests for 64x32 and 64x64 multiply. Mainly
testing 32-bit JITs that implement ALU64 operations with two 32-bit
CPU registers per operand.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210809091829.810076-8-johan.almbladh@anyfinetworks.com
This patch adds a number of tests for BPF_LSH, BPF_RSH amd BPF_ARSH
ALU64 operations with values that may trigger different JIT code paths.
Mainly testing 32-bit JITs that implement ALU64 operations with two
32-bit CPU registers per operand.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210809091829.810076-7-johan.almbladh@anyfinetworks.com
This patch adds more tests of ALU32 shift operations BPF_LSH and BPF_RSH,
including the special case of a zero immediate. Also add corresponding
BPF_ARSH tests which were missing for ALU32.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-6-johan.almbladh@anyfinetworks.com
This patch adds tests of BPF_AND, BPF_OR and BPF_XOR with different
magnitude of the immediate value. Mainly checking 32-bit JIT sub-word
handling and zero/sign extension.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-5-johan.almbladh@anyfinetworks.com
This patch corrects the test description in a number of cases where
the description differed from what was actually tested and expected.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-4-johan.almbladh@anyfinetworks.com
Tests for ALU32 and ALU64 MOV with different sizes of the immediate
value. Depending on the immediate field width of the native CPU
instructions, a JIT may generate code differently depending on the
immediate value. Test that zero or sign extension is performed as
expected. Mainly for JIT testing.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-3-johan.almbladh@anyfinetworks.com
An eBPF JIT may implement JMP32 operations in a different way than JMP,
especially on 32-bit architectures. This patch adds a series of tests
for JMP32 operations, mainly for testing JITs.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210809091829.810076-2-johan.almbladh@anyfinetworks.com
Each test case can have a set of sub-tests, where each sub-test can
run the cBPF/eBPF test snippet with its own data_size and expected
result. Before, the end of the sub-test array was indicated by both
data_size and result being zero. However, most or all of the internal
eBPF tests has a data_size of zero already. When such a test also had
an expected value of zero, the test was never run but reported as
PASS anyway.
Now the test runner always runs the first sub-test, regardless of the
data_size and result values. The sub-test array zero-termination only
applies for any additional sub-tests.
There are other ways fix it of course, but this solution at least
removes the surprise of eBPF tests with a zero result always succeeding.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210721103822.3755111-1-johan.almbladh@anyfinetworks.com
