Commit Graph

4688 Commits

Author SHA1 Message Date
Linus Torvalds
0da522107e compat_ioctl: remove most of fs/compat_ioctl.c
As part of the cleanup of some remaining y2038 issues, I came to
 fs/compat_ioctl.c, which still has a couple of commands that need support
 for time64_t.
 
 In completely unrelated work, I spent time on cleaning up parts of this
 file in the past, moving things out into drivers instead.
 
 After Al Viro reviewed an earlier version of this series and did a lot
 more of that cleanup, I decided to try to completely eliminate the rest
 of it and move it all into drivers.
 
 This series incorporates some of Al's work and many patches of my own,
 but in the end stops short of actually removing the last part, which is
 the scsi ioctl handlers. I have patches for those as well, but they need
 more testing or possibly a rewrite.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdsHCdAAoJEJpsee/mABjZtYkP/1JGl3jFv3Iq/5BCdPkaePP1
 RtMJRNfURgK3GeuHUui330PvVjI/pLWXU/VXMK2MPTASpJLzYz3uCaZrpVWEMpDZ
 +ImzGmgJkITlW1uWU3zOcQhOxTyb1hCZ0Ci+2xn9QAmyOL7prXoXCXDWv3h6iyiF
 lwG+nW+HNtyx41YG+9bRfKNoG0ZJ+nkJ70BV6u0acQHXWn7Xuupa9YUmBL87hxAL
 6dlJfLTJg6q8QSv/Q6LxslfWk2Ti8OOJZOwtFM5R8Bgl0iUcvshiRCKfv/3t9jXD
 dJNvF1uq8z+gracWK49Qsfq5dnZ2ZxHFUo9u0NjbCrxNvWH/sdvhbaUBuJI75seH
 VIznCkdxFhrqitJJ8KmxANxG08u+9zSKjSlxG2SmlA4qFx/AoStoHwQXcogJscNb
 YIXYKmWBvwPzYu09QFAXdHFPmZvp/3HhMWU6o92lvDhsDwzkSGt3XKhCJea4DCaT
 m+oCcoACqSWhMwdbJOEFofSub4bY43s5iaYuKes+c8O261/Dwg6v/pgIVez9mxXm
 TBnvCsotq5m8wbwzv99eFqGeJH8zpDHrXxEtRR5KQqMqjLq/OQVaEzmpHZTEuK7n
 e/V/PAKo2/V63g4k6GApQXDxnjwT+m0aWToWoeEzPYXS6KmtWC91r4bWtslu3rdl
 bN65armTm7bFFR32Avnu
 =lgCl
 -----END PGP SIGNATURE-----

Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground

Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
 "As part of the cleanup of some remaining y2038 issues, I came to
  fs/compat_ioctl.c, which still has a couple of commands that need
  support for time64_t.

  In completely unrelated work, I spent time on cleaning up parts of
  this file in the past, moving things out into drivers instead.

  After Al Viro reviewed an earlier version of this series and did a lot
  more of that cleanup, I decided to try to completely eliminate the
  rest of it and move it all into drivers.

  This series incorporates some of Al's work and many patches of my own,
  but in the end stops short of actually removing the last part, which
  is the scsi ioctl handlers. I have patches for those as well, but they
  need more testing or possibly a rewrite"

* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
  scsi: sd: enable compat ioctls for sed-opal
  pktcdvd: add compat_ioctl handler
  compat_ioctl: move SG_GET_REQUEST_TABLE handling
  compat_ioctl: ppp: move simple commands into ppp_generic.c
  compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
  compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
  compat_ioctl: unify copy-in of ppp filters
  tty: handle compat PPP ioctls
  compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
  compat_ioctl: handle SIOCOUTQNSD
  af_unix: add compat_ioctl support
  compat_ioctl: reimplement SG_IO handling
  compat_ioctl: move WDIOC handling into wdt drivers
  fs: compat_ioctl: move FITRIM emulation into file systems
  gfs2: add compat_ioctl support
  compat_ioctl: remove unused convert_in_user macro
  compat_ioctl: remove last RAID handling code
  compat_ioctl: remove /dev/raw ioctl translation
  compat_ioctl: remove PCI ioctl translation
  compat_ioctl: remove joystick ioctl translation
  ...
2019-12-01 13:46:15 -08:00
Linus Torvalds
7e5192b93c for-5.5/disk-revalidate-20191122
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3YA5sQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgplFxEACM7CwrWsullPX6b3j62NW6VepU5JQdzwVW
 S+bmLpb8Z2I4wzEnaVuWAY5hEhGaS9NFtQLdBG0W0YOzH7sweNmL38dZfCE4+oFj
 ZwytpXQQhAQUwkgANJCpNfzDymHduPsTz7RYqRr1plmhna1KC/dnhuMwg8lVOBf5
 myWjqcCHxxoQn6KFqcX9/Azz29ZrgzV28lOnZdiw9yoTjraBmS/ymx4woaa3pc2v
 UNw0Cgx53vHENJzEL9FNSxc0ENZq/bQhpDolnc2AlPGy9+vPg4afMitJb60KTT7r
 HpDcLGkYAIKLrfk8DUmFW8lZhWsxTchXvK2+zwQV7nXMcdUgGN/G3HTIdvWEHFv8
 oGbPB8cfdA2vNC9QAybwWEum/S0H/GfYsBVplNCUCdFXE7yj1cbKD5dPfCyIvmPz
 BjgMae5vH/KoH+vNdZ8NL5oFz2eFC3rLxa/Ss78pcEoBdiiV3WQHPv9MBmn/OQ/v
 CeUAM7omyWpbv3lcByNzIOkeeO3m6Ne28EpEMc2pzLnDPu2btvSyetdO488DE+7O
 MNfApZULVX91W7jWnhM5GR+1SJTdEXZnoxnFV+J/j4deog5vUR7Dt1VkujpUILfL
 7jMl3erF6C53wNrc465z8iLRp1ZM+aTpwatXXRfucNXeomExKK9zF+/+O1ACckUB
 jWDCR9NTcw==
 =e5Lx
 -----END PGP SIGNATURE-----

Merge tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-block

Pull disk revalidation updates from Jens Axboe:
 "This continues the work that Jan Kara started to thoroughly cleanup
  and consolidate how we handle rescans and revalidations"

* tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-block:
  block: move clearing bd_invalidated into check_disk_size_change
  block: remove (__)blkdev_reread_part as an exported API
  block: fix bdev_disk_changed for non-partitioned devices
  block: move rescan_partitions to fs/block_dev.c
  block: merge invalidate_partitions into rescan_partitions
  block: refactor rescan_partitions
2019-11-25 11:37:01 -08:00
Linus Torvalds
464a47f45d for-5.5/zoned-20191122
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3YAiAQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpsJRD/wNfUGWVdIckw7iiFNuuipKBEy0Nd2VLt0B
 I+pVW/YjDsG2oxWXWPs5Nxc7ca2A8EzRXcWP0xEjBfOCcBh/9mULi1flkLRoWKcq
 v/OuTVif3ATvgJcwNkbMcoi0bYA/VwKi2dWC6ALhDDmZhyMTLeE362oIeOUNNnl6
 GM8CGZHaRfmBzcH5t+WnxiS6rBlt5iwFJ35EvZo3GMXGGiLGlryxEXPAwZrf4haA
 Z4atNinKcNXhb80LWHo23aK3bpnaumwKP4BPuLEyvnjS4iU8SeYTXy+w5yq1BE+h
 HBP5s3no/mPiBAG8b6EZXqOJUGlN596AQfNLu7vCR78tmImZF0jKRFsHEAaKXf+B
 1yRgZi7J+gV0qzK/Ufulg43vItk5/sTzEuV9YLfCpKTr14MFcWw908BAqaI5Kk1K
 e8uGqnb2KbZOLTW4QdPvpWg3eYtqEoluSoZUQ5elHxqQZ4MSZ1lK78FF1TeaW/pw
 sYH+v6rsWoVjEcFSwGoaaOMravzU4MKtavNAZrTJwKZx7qCqkwmi3R1k8WF6KsSV
 rTRAzUC1wpTdSOm1MYPMMKM/h5+BJRSJ/RjljOF4fXLnvpD5q0lequCWjrrEzc6c
 HPRKIgSBq7S620A19QD8UxwvZJ8bOivESqr0bux29v1Vpf7vJBrRMng8nLUrXfJs
 jdma5mK1UA==
 =/G9l
 -----END PGP SIGNATURE-----

Merge tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block

Pull zoned block device update from Jens Axboe:
 "Enhancements and improvements to the zoned device support"

* tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block:
  scsi: sd_zbc: Remove set but not used variable 'buflen'
  block: rework zone reporting
  scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
  null_blk: Add zone_nr_conv to features
  null_blk: clean up report zones
  null_blk: clean up the block device operations
  block: Remove partition support for zoned block devices
  block: Simplify report zones execution
  block: cleanup the !zoned case in blk_revalidate_disk_zones
  block: Enhance blk_revalidate_disk_zones()
2019-11-25 11:22:37 -08:00
Linus Torvalds
ff6814b078 for-5.5/block-20191121
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3WxrEQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpuH5D/9qQKfIIuQDUNO4Xx+dIHimTDCrfiEOeO9e
 CRaMuSj+yMxLDMwfX8RnDmR17H3ZVoiIY1CT24U9ZkA5iDjeAH4xmzkH30US7LR7
 /64YVZTxB0OrWppRK8RiIhaJJZDQ6+HPUQsn6PRaLVuFHi2unMoTQnj/ZQKz03QA
 Pl8Xx7qBtH1JwYCzQ21f/uryAcNg9eWabRLN2f1uiOXLmvRxOfh6Z/iaezlaZlmL
 qeJdcdLjjvOgOPwEOfNjfS6pd+XBz3gdEhn0l+11nHITxWZmVBwsWTKyUQlCmKnl
 yuCWDVyx5d6zCnlrLYG0l2Fn2lr9SwAkdkq3YAKV03hA/6s6P9q9bm31VvOf828x
 7gmr4YVz68y7H9bM0QAHCvDpjll0aIEUw6XFzSOCDtZ9B6/pppYQWzMU71J05eyF
 8DOKv2M2EVNLUjf6u0RDyolnWGU0kIjt5ryWE3OsGcezAVa2wYstgUJTKbrn1YgT
 j+4KTpaI+sg8GKDFauvxcSa6gwoRp6jweFNW+7vC090/shXmrGmVLOnQZKRuHho/
 O4W8y/1/deM8CCIAETpiNxA8RV5U/EZygrFGDFc7yzTtVDGHY356M/B4Bmm2qkVu
 K3WgeZp8Fc0lH0QF6Pp9ZlBkZEpGNCAPVsPkXIsxQXbctftkn3KY//uIubfpFEB1
 PpHSicvkww==
 =HYYq
 -----END PGP SIGNATURE-----

Merge tag 'for-5.5/block-20191121' of git://git.kernel.dk/linux-block

Pull core block updates from Jens Axboe:
 "Due to more granular branches, this one is small and will be followed
  with other core branches that add specific features. I meant to just
  have a core and drivers branch, but external dependencies we ended up
  adding a few more that are also core.

  The changes are:

   - Fixes and improvements for the zoned device support (Ajay, Damien)

   - sed-opal table writing and datastore UID (Revanth)

   - blk-cgroup (and bfq) blk-cgroup stat fixes (Tejun)

   - Improvements to the block stats tracking (Pavel)

   - Fix for overruning sysfs buffer for large number of CPUs (Ming)

   - Optimization for small IO (Ming, Christoph)

   - Fix typo in RWH lifetime hint (Eugene)

   - Dead code removal and documentation (Bart)

   - Reduction in memory usage for queue and tag set (Bart)

   - Kerneldoc header documentation (André)

   - Device/partition revalidation fixes (Jan)

   - Stats tracking for flush requests (Konstantin)

   - Various other little fixes here and there (et al)"

* tag 'for-5.5/block-20191121' of git://git.kernel.dk/linux-block: (48 commits)
  Revert "block: split bio if the only bvec's length is > SZ_4K"
  block: add iostat counters for flush requests
  block,bfq: Skip tracing hooks if possible
  block: sed-opal: Introduce SUM_SET_LIST parameter and append it using 'add_token_u64'
  blk-cgroup: cgroup_rstat_updated() shouldn't be called on cgroup1
  block: Don't disable interrupts in trigger_softirq()
  sbitmap: Delete sbitmap_any_bit_clear()
  blk-mq: Delete blk_mq_has_free_tags() and blk_mq_can_queue()
  block: split bio if the only bvec's length is > SZ_4K
  block: still try to split bio if the bvec crosses pages
  blk-cgroup: separate out blkg_rwstat under CONFIG_BLK_CGROUP_RWSTAT
  blk-cgroup: reimplement basic IO stats using cgroup rstat
  blk-cgroup: remove now unused blkg_print_stat_{bytes|ios}_recursive()
  blk-throtl: stop using blkg->stat_bytes and ->stat_ios
  bfq-iosched: stop using blkg->stat_bytes and ->stat_ios
  bfq-iosched: relocate bfqg_*rwstat*() helpers
  block: add zone open, close and finish ioctl support
  block: add zone open, close and finish operations
  block: Simplify REQ_OP_ZONE_RESET_ALL handling
  block: Remove REQ_OP_ZONE_RESET plugging
  ...
2019-11-25 10:59:41 -08:00
Jens Axboe
1e279153df Revert "block: split bio if the only bvec's length is > SZ_4K"
We really don't need this, as the slow path will do the right thing
anyway.

This reverts commit 6952a7f844.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-21 10:16:12 -07:00
Konstantin Khlebnikov
b686631865 block: add iostat counters for flush requests
Requests that triggers flushing volatile writeback cache to disk (barriers)
have significant effect to overall performance.

Block layer has sophisticated engine for combining several flush requests
into one. But there is no statistics for actual flushes executed by disk.
Requests which trigger flushes usually are barriers - zero-size writes.

This patch adds two iostat counters into /sys/class/block/$dev/stat and
/proc/diskstats - count of completed flush requests and their total time.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-21 09:06:47 -07:00
Dmitry Monakhov
40d47c155e block,bfq: Skip tracing hooks if possible
In most cases blk_tracing is not active, but  bfq_log_bfqq macro
generate pid_str unconditionally, which result in significant overhead.

## Test
modprobe null_blk
echo bfq > /sys/block/nullb0/queue/scheduler
fio --name=t --ioengine=libaio --direct=1 --filename=/dev/nullb0 \
   --runtime=30 --time_based=1 --rw=write --iodepth=128 --bs=4k

# Results
|        | baseline | w/ patch | gain |
| iops   | 113.19K  | 126.42K  | +11% |

Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-20 16:10:29 -07:00
Revanth Rajashekar
c6da429ea9 block: sed-opal: Introduce SUM_SET_LIST parameter and append it using 'add_token_u64'
In function 'activate_lsp', rather than hard-coding the short atom
header(0x83), we need to let the function 'add_short_atom_header' append
the header based on the parameter being appended.

The parameter has been defined in Section 3.1.2.1 of
https://trustedcomputinggroup.org/wp-content/uploads/TCG_Storage-Opal_Feature_Set_Single_User_Mode_v1-00_r1-00-Final.pdf

Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-18 09:49:15 -07:00
Sebastian Andrzej Siewior
de678bc63c block: Don't disable interrupts in trigger_softirq()
trigger_softirq() is always invoked as a SMP-function call which is
always invoked with disables interrupts.

Don't disable interrupt in trigger_softirq() because interrupts are
already disabled.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-18 07:29:22 -07:00
Jiufei Xue
8b37bc277f iocost: check active_list of all the ancestors in iocg_activate()
There is a bug that checking the same active_list over and over again
in iocg_activate(). The intention of the code was checking whether all
the ancestors and self have already been activated. So fix it.

Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14 13:56:54 -07:00
Christoph Hellwig
f0b870df80 block: remove (__)blkdev_reread_part as an exported API
In general drivers should never mess with partition tables directly.
Unfortunately s390 and loop do for somewhat historic reasons, but they
can use bdev_disk_changed directly instead when we export it as they
satisfy the sanity checks we have in __blkdev_reread_part.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>	[dasd]
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14 07:43:59 -07:00
Christoph Hellwig
142fe8f4bb block: fix bdev_disk_changed for non-partitioned devices
We still have to set the capacity to 0 if invalidating or call
revalidate_disk if not even if the disk has no partitions.  Fix
that by merging rescan_partitions into bdev_disk_changed and just
stubbing out blk_add_partitions and blk_drop_partitions for
non-partitioned devices.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14 07:43:53 -07:00
Christoph Hellwig
a1548b6744 block: move rescan_partitions to fs/block_dev.c
Large parts of rescan_partitions aren't about partitions, and
moving it to block_dev.c will allow for some further cleanups by
merging it into its only caller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14 07:43:21 -07:00
Christoph Hellwig
6917d06899 block: merge invalidate_partitions into rescan_partitions
A lot of the logic in invalidate_partitions and rescan_partitions is
shared.  Merge the two functions to simplify things.  There is a small
behavior change in that we now send the kevent change notice also if we
were not invalidating but no partitions were found, which seems like
the right thing to do.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14 07:42:41 -07:00
Christoph Hellwig
f902b02600 block: refactor rescan_partitions
Split out a helper that adds one single partition, and another one
calling that dealing with the parsed_partitions state.  This makes
it much more obvious how we clean up all state and start again when
using the rescan label.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14 07:40:55 -07:00
Paolo Valente
478de3380c block, bfq: deschedule empty bfq_queues not referred by any process
Since commit 3726112ec7 ("block, bfq: re-schedule empty queues if
they deserve I/O plugging"), to prevent the service guarantees of a
bfq_queue from being violated, the bfq_queue may be left busy, i.e.,
scheduled for service, even if empty (see comments in
__bfq_bfqq_expire() for details). But, if no process will send
requests to the bfq_queue any longer, then there is no point in
keeping the bfq_queue scheduled for service.

In addition, keeping the bfq_queue scheduled for service, but with no
process reference any longer, may cause the bfq_queue to be freed when
descheduled from service. But this is assumed to never happen, and
causes a UAF if it happens. This, in turn, caused crashes [1, 2].

This commit fixes this issue by descheduling an empty bfq_queue when
it remains with not process reference.

[1] https://bugzilla.redhat.com/show_bug.cgi?id=1767539
[2] https://bugzilla.kernel.org/show_bug.cgi?id=205447

Fixes: 3726112ec7 ("block, bfq: re-schedule empty queues if they deserve I/O plugging")
Reported-by: Chris Evich <cevich@redhat.com>
Reported-by: Patrick Dung <patdung100@gmail.com>
Reported-by: Thorsten Schubert <tschubert@bafh.org>
Tested-by: Thorsten Schubert <tschubert@bafh.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14 07:00:54 -07:00
John Garry
cb711b91a3 blk-mq: Delete blk_mq_has_free_tags() and blk_mq_can_queue()
These functions are not referenced, so delete them.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-13 12:50:38 -07:00
Christoph Hellwig
d41003513e block: rework zone reporting
Avoid the need to allocate a potentially large array of struct blk_zone
in the block layer by switching the ->report_zones method interface to
a callback model. Now the caller simply supplies a callback that is
executed on each reported zone, and private data for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12 19:12:07 -07:00
Damien Le Moal
5eac3eb30c block: Remove partition support for zoned block devices
No known partitioning tool supports zoned block devices, especially the
host managed flavor with strong sequential write constraints.
Furthermore, there are also no known user nor use cases for partitioned
zoned block devices.

This patch removes partition device creation for zoned block devices,
which allows simplifying the processing of zone commands for zoned
block devices. A warning is added if a partition table is found on the
device.

For report zones operations no zone sector information remapping is
necessary anymore, simplifying the code. Of note is that remapping of
zone reports for DM targets is still necessary as done by
dm_remap_zone_report().

Similarly, remaping of a zone reset bio is not necessary anymore.
Testing for the applicability of the zone reset all request also becomes
simpler and only needs to check that the number of sectors of the
requested zone range is equal to the disk capacity.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12 19:11:57 -07:00
Damien Le Moal
ceeb373aa6 block: Simplify report zones execution
All kernel users of blkdev_report_zones() as well as applications use
through ioctl(BLKZONEREPORT) expect to potentially get less zone
descriptors than requested. As such, the use of the internal report
zones command execution loop implemented by blk_report_zones() is
not necessary and can even be harmful to performance by causing the
execution of inefficient small zones report command to service the
reminder of a requested zone array.

This patch removes blk_report_zones(), simplifying the code. Also
remove a now incorrect comment in dm_blk_report_zones().

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier Gonzalez <javier@javigon.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12 19:11:56 -07:00
Christoph Hellwig
c98c3d09fc block: cleanup the !zoned case in blk_revalidate_disk_zones
blk_revalidate_disk_zones is never called for non-zoned devices.  Just
return early and warn instead of trying to handle this case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12 19:11:54 -07:00
Damien Le Moal
d9dd73087a block: Enhance blk_revalidate_disk_zones()
For ZBC and ZAC zoned devices, the scsi driver revalidation processing
implemented by sd_revalidate_disk() includes a call to
sd_zbc_read_zones() which executes a full disk zone report used to
check that all zones of the disk are the same size. This processing is
followed by a call to blk_revalidate_disk_zones(), used to initialize
the device request queue zone bitmaps (zone type and zone write lock
bitmaps). To do so, blk_revalidate_disk_zones() also executes a full
device zone report to obtain zone types. As a result, the entire
zoned block device revalidation process includes two full device zone
report.

By moving the zone size checks into blk_revalidate_disk_zones(), this
process can be optimized to a single full device zone report, leading to
shorter device scan and revalidation times. This patch implements this
optimization, reducing the original full device zone report implemented
in sd_zbc_check_zones() to a single, small, report zones command
execution to obtain the size of the first zone of the device. Checks
whether all zones of the device are the same size as the first zone
size are moved to the generic blk_check_zone() function called from
blk_revalidate_disk_zones().

This optimization also has the following benefits:
1) fewer memory allocations in the scsi layer during disk revalidation
   as the potentailly large buffer for zone report execution is not
   needed.
2) Implement zone checks in a generic manner, reducing the burden on
   device driver which only need to obtain the zone size and check that
   this size is a power of 2 number of LBAs. Any new type of zoned
   block device will benefit from this.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12 19:11:52 -07:00
Junichi Nomura
e3a5d8e386 block: check bi_size overflow before merge
__bio_try_merge_page() may merge a page to bio without bio_full() check
and cause bi_size overflow.

The overflow typically ends up with sd_init_command() warning on zero
segment request with call trace like this:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 1986 at drivers/scsi/scsi_lib.c:1025 scsi_init_io+0x156/0x180
    CPU: 2 PID: 1986 Comm: kworker/2:1H Kdump: loaded Not tainted 5.4.0-rc7 #1
    Workqueue: kblockd blk_mq_run_work_fn
    RIP: 0010:scsi_init_io+0x156/0x180
    RSP: 0018:ffffa11487663bf0 EFLAGS: 00010246
    RAX: 00000000002be0a0 RBX: ffff8e6e9ff30118 RCX: 0000000000000000
    RDX: 00000000ffffffe1 RSI: 0000000000000000 RDI: ffff8e6e9ff30118
    RBP: ffffa11487663c18 R08: ffffa11487663d28 R09: ffff8e6e9ff30150
    R10: 0000000000000001 R11: 0000000000000000 R12: ffff8e6e9ff30000
    R13: 0000000000000001 R14: ffff8e74a1cf1800 R15: ffff8e6e9ff30000
    FS:  0000000000000000(0000) GS:ffff8e6ea7680000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007fff18cf0fe8 CR3: 0000000659f0a001 CR4: 00000000001606e0
    Call Trace:
     sd_init_command+0x326/0xb40 [sd_mod]
     scsi_queue_rq+0x502/0xaa0
     ? blk_mq_get_driver_tag+0xe7/0x120
     blk_mq_dispatch_rq_list+0x256/0x5a0
     ? elv_rb_del+0x24/0x30
     ? deadline_remove_request+0x7b/0xc0
     blk_mq_do_dispatch_sched+0xa3/0x140
     blk_mq_sched_dispatch_requests+0xfb/0x170
     __blk_mq_run_hw_queue+0x81/0x130
     blk_mq_run_work_fn+0x1b/0x20
     process_one_work+0x179/0x390
     worker_thread+0x4f/0x3e0
     kthread+0x105/0x140
     ? max_active_store+0x80/0x80
     ? kthread_bind+0x20/0x20
     ret_from_fork+0x35/0x40
    ---[ end trace f9036abf5af4a4d3 ]---
    blk_update_request: I/O error, dev sdd, sector 2875552 op 0x1:(WRITE) flags 0x0 phys_seg 0 prio class 0
    XFS (sdd1): writeback error on sector 2875552

__bio_try_merge_page() should check the overflow before actually doing
merge.

Fixes: 07173c3ec2 ("block: enable multipage bvecs")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12 07:26:27 -07:00
Ming Lei
6952a7f844 block: split bio if the only bvec's length is > SZ_4K
64K PAGE_SIZE is popular on ARM64 or other ARCHs, and 64K has been big
enough to break some devices probably, so change the logic to split bio
if the only bvec's length is > SZ_4K instead of PAGE_SIZE.

Fixes: fa53228721 (block: avoid blk_bio_segment_split for small I/O operations)
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-08 06:59:51 -07:00
Ming Lei
59db8ba2f6 block: still try to split bio if the bvec crosses pages
Some device may set segment boundary as PAGE_SIZE - 1. If the bvec
crosses pages, and meantime its length is <= PAGE_SIZE, we still need
to split the bvec into 2 segments.

Fixes this issue by still splitting bio if the single bvec crosses
pages.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: fa53228721 (block: avoid blk_bio_segment_split for small I/O operations)
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-08 06:59:49 -07:00
Tejun Heo
1d156646e0 blk-cgroup: separate out blkg_rwstat under CONFIG_BLK_CGROUP_RWSTAT
blkg_rwstat is now only used by bfq-iosched and blk-throtl when on
cgroup1.  Let's move it into its own files and gate it behind a config
option.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07 12:28:13 -07:00
Tejun Heo
f733164829 blk-cgroup: reimplement basic IO stats using cgroup rstat
blk-cgroup has been using blkg_rwstat to track basic IO stats.
Unfortunately, reading recursive stats scales badly as itinvolves
walking all descendants.  On systems with a huge number of cgroups
(dead or alive), this can lead to substantial CPU cost when reading IO
stats.

This patch reimplements basic IO stats using cgroup rstat which uses
more memory but makes recursive stat reading O(# descendants which
have been active since last reading) instead of O(# descendants).

* blk-cgroup core no longer uses sync/async stats.  Introduce new stat
  enums - BLKG_IOSTAT_{READ|WRITE|DISCARD}.

* Add blkg_iostat[_set] which encapsulates byte and io stats, last
  values for propagation delta calculation and u64_stats_sync for
  correctness on 32bit archs.

* Update the new percpu stat counters directly and implement
  blkcg_rstat_flush() to implement propagation.

* blkg_print_stat() can now bring the stats up to date by calling
  cgroup_rstat_flush() and print them instead of directly summing up
  all descendants.

* It now allocates 96 bytes per cpu.  It used to be 40 bytes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Dan Schatzberg <dschatzberg@fb.com>
Cc: Daniel Xu <dlxu@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07 12:28:13 -07:00
Tejun Heo
8a80d5d663 blk-cgroup: remove now unused blkg_print_stat_{bytes|ios}_recursive()
These don't have users anymore.  Remove them.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07 12:28:13 -07:00
Tejun Heo
7ca464383a blk-throtl: stop using blkg->stat_bytes and ->stat_ios
When used on cgroup1, blk-throtl uses the blkg->stat_bytes and
->stat_ios from blk-cgroup core to populate four stat knobs.
blk-cgroup core is moving away from blkg_rwstat to improve scalability
and won't be able to support this usage.

It isn't like the sharing gains all that much.  Let's break them out
to dedicated rwstat counters which are updated when on cgroup1.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07 12:28:13 -07:00
Tejun Heo
fd41e60331 bfq-iosched: stop using blkg->stat_bytes and ->stat_ios
When used on cgroup1, bfq uses the blkg->stat_bytes and ->stat_ios
from blk-cgroup core to populate six stat knobs.  blk-cgroup core is
moving away from blkg_rwstat to improve scalability and won't be able
to support this usage.

It isn't like the sharing gains all that much.  Let's break it out to
dedicated rwstat counters which are updated when on cgroup1.  This
makes use of bfqg_*rwstat*() helpers outside of
CONFIG_BFQ_CGROUP_DEBUG.  Move them out.

v2: Compile fix when !CONFIG_BFQ_CGROUP_DEBUG.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07 12:28:13 -07:00
Tejun Heo
a557f1c7fe bfq-iosched: relocate bfqg_*rwstat*() helpers
Collect them right under #ifdef CONFIG_BFQ_CGROUP_DEBUG.  The next
patch will use them from !DEBUG path and this makes it easy to move
them out of the ifdef block.

This is pure code reorganization.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07 12:28:13 -07:00
Jens Axboe
912c0a8591 Merge branch 'for-linus' into for-5.5/block
Pull on for-linus to resolve what otherwise would have been a conflict
with the cgroups rstat patchset from Tejun.

* for-linus: (942 commits)
  blkcg: make blkcg_print_stat() print stats only for online blkgs
  nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
  nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
  nvme-rdma: fix a segmentation fault during module unload
  iocost: don't nest spin_lock_irq in ioc_weight_write()
  io_uring: ensure we clear io_kiocb->result before each issue
  um-ubd: Entrust re-queue to the upper layers
  nvme-multipath: remove unused groups_only mode in ana log
  nvme-multipath: fix possible io hang after ctrl reconnect
  io_uring: don't touch ctx in setup after ring fd install
  io_uring: Fix leaked shadow_req
  Linux 5.4-rc5
  riscv: cleanup do_trap_break
  nbd: verify socket is supported during setup
  ata: libahci_platform: Fix regulator_get_optional() misuse
  nbd: handle racing with error'ed out commands
  nbd: protect cmd->status with cmd->lock
  io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREAD
  io_uring: used cached copies of sq->dropped and cq->overflow
  ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
  ...
2019-11-07 12:27:19 -07:00
Ajay Joshi
e876df1fe0 block: add zone open, close and finish ioctl support
Introduce three new ioctl commands BLKOPENZONE, BLKCLOSEZONE and
BLKFINISHZONE to allow applications to control the condition of zones
on a zoned block device through the execution of the REQ_OP_ZONE_OPEN,
REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH operations.

Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.

Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07 06:31:50 -07:00
Ajay Joshi
6c1b1da58f block: add zone open, close and finish operations
Zoned block devices (ZBC and ZAC devices) allow an explicit control
over the condition (state) of zones. The operations allowed are:
* Open a zone: Transition to open condition to indicate that a zone will
  actively be written
* Close a zone: Transition to closed condition to release the drive
  resources used for writing to a zone
* Finish a zone: Transition an open or closed zone to the full
  condition to prevent write operations

To enable this control for in-kernel zoned block device users, define
the new request operations REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE
and REQ_OP_ZONE_FINISH as well as the generic function
blkdev_zone_mgmt() for submitting these operations on a range of zones.
This results in blkdev_reset_zones() removal and replacement with this
new zone magement function. Users of blkdev_reset_zones() (f2fs and
dm-zoned) are updated accordingly.

Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.

Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07 06:31:48 -07:00
Damien Le Moal
c7a1d926dc block: Simplify REQ_OP_ZONE_RESET_ALL handling
There is no need for the function __blkdev_reset_all_zones() as
REQ_OP_ZONE_RESET_ALL can be handled directly in blkdev_reset_zones()
bio loop with an early break from the loop. This patch removes this
function and modifies blkdev_reset_zones(), simplifying the code.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07 06:30:18 -07:00
Damien Le Moal
a84324d2ed block: Remove REQ_OP_ZONE_RESET plugging
REQ_OP_ZONE_RESET operations cannot be merged as these bios and requests
do not have a size and are never sequential due to the zone start sector
position required for their execution. As a result, there is no point in
using a plug around blkdev_reset_zones() bio issuing loop. This patch
removes this unnecessary plugging.

Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07 06:30:16 -07:00
Tejun Heo
b0814361a2 blkcg: make blkcg_print_stat() print stats only for online blkgs
blkcg_print_stat() iterates blkgs under RCU and doesn't test whether
the blkg is online.  This can call into pd_stat_fn() on a pd which is
still being initialized leading to an oops.

The heaviest operation - recursively summing up rwstat counters - is
already done while holding the queue_lock.  Expand queue_lock to cover
the other operations and skip the blkg if it isn't online yet.  The
online state is protected by both blkcg and queue locks, so this
guarantees that only online blkgs are processed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Roman Gushchin <guro@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Fixes: 903d23f0a3 ("blk-cgroup: allow controllers to output their own stats")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-06 17:08:38 -07:00
Jan Kara
f8db383507 block: Warn if elevator= parameter is used
With transition to blk-mq, the elevator= kernel argument was removed as
it makes less and less sense with the current variety of devices.  Since
this may surprise some users and there are advices on the Internet that
still suggest to use it, let's at least warn if the parameter is used.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-06 07:16:07 -07:00
Christoph Hellwig
fa53228721 block: avoid blk_bio_segment_split for small I/O operations
__blk_queue_split() adds significant overhead for small I/O operations.
Add a shortcut to avoid it for cases where we know we never need to
split.

Based on a patch from Ming Lei.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04 17:13:54 -07:00
Ming Lei
d2c9be89f8 blk-mq: make sure that line break can be printed
8962842ca5 ("blk-mq: avoid sysfs buffer overflow with too many CPU cores")
avoids sysfs buffer overflow, and reserves one character for line break.
However, the last snprintf() doesn't get correct 'size' parameter passed
in, so fixed it.

Fixes: 8962842ca5 ("blk-mq: avoid sysfs buffer overflow with too many CPU cores")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04 07:14:10 -07:00
Revanth Rajashekar
62c441c6ae block: sed-opal: Introduce Opal Datastore UID
This patch introduces Opal Datastore UID.
The generic read/write table ioctl can use this UID
to access the Opal Datastore.

Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04 07:11:32 -07:00
Revanth Rajashekar
51f421c85c block: sed-opal: Add support to read/write opal tables generically
This feature gives the user RW access to any opal table with admin1
authority. The flags described in the new structure determines if the user
wants to read/write the data. Flags are checked for valid values in
order to allow future features to be added to the ioctl.

The user can provide the desired table's UID. Also, the ioctl provides a
size and offset field and internally will loop data accesses to return
the full data block. Read overrun is prevented by the initiator's
sec_send_recv() backend. The ioctl provides a private field with the
intention to accommodate any future expansions to the ioctl.

Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04 07:11:31 -07:00
Revanth Rajashekar
3495ea1b5f block: sed-opal: Generalizing write data to any opal table
This patch refactors the existing "write_shadowmbr" func and
creates a new generalized function "generic_table_write_data",
to write data to any opal table. Also, a few cleanups are included
in this patch.

Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-04 07:11:29 -07:00
Ming Lei
8962842ca5 blk-mq: avoid sysfs buffer overflow with too many CPU cores
It is reported that sysfs buffer overflow can be triggered if the system
has too many CPU cores(>841 on 4K PAGE_SIZE) when showing CPUs of
hctx via /sys/block/$DEV/mq/$N/cpu_list.

Use snprintf to avoid the potential buffer overflow.

This version doesn't change the attribute format, and simply stops
showing CPU numbers if the buffer is going to overflow.

Cc: stable@vger.kernel.org
Fixes: 676141e48af7("blk-mq: don't dump CPU -> hw queue map on driver load")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-02 08:02:21 -06:00
John Garry
626fb735a4 blk-mq: Make blk_mq_run_hw_queue() return void
Since commit 97889f9ac2 ("blk-mq: remove synchronize_rcu() from
blk_mq_del_queue_tag_set()"), the return value of blk_mq_run_hw_queue()
is never checked, so make it return void, which very marginally simplifies
the code.

Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-01 08:42:41 -06:00
Dan Carpenter
41591a51f0 iocost: don't nest spin_lock_irq in ioc_weight_write()
This code causes a static analysis warning:

    block/blk-iocost.c:2113 ioc_weight_write() error: double lock 'irq'

We disable IRQs in blkg_conf_prep() and re-enable them in
blkg_conf_finish().  IRQ disable/enable should not be nested because
that means the IRQs will be enabled at the first unlock instead of the
second one.

Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-31 11:40:57 -06:00
André Almeida
1fead7182f blk-mq: remove needless goto from blk_mq_get_driver_tag
The only usage of the label "done" is when (rq->tag != -1) at the
beginning of the function. Rather than jumping to label, we can just
remove this label and execute the code at the "if". Besides that, the
code that would be executed after the label "done" is the return of the
logical expression (rq->tag != -1) but since we are already inside the
if, we now that this is true. Remove the label and replace the goto with
the proper result of the label.

Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25 14:28:10 -06:00
Bart Van Assche
f7e76dbc24 block: Reduce the amount of memory used for tag sets
Instead of allocating an array of size nr_cpu_ids for set->tags, allocate
an array of size set->nr_hw_queues. This patch improves behavior that was
introduced by commit 868f2f0b72 ("blk-mq: dynamic h/w context count").

Reallocating tag sets from inside __blk_mq_update_nr_hw_queues() is safe
because:
- All request queues that share the tag sets are frozen before the tag sets
  are reallocated.
- blk_mq_queue_tag_busy_iter() holds q->q_usage_counter while active and
  hence is serialized against __blk_mq_update_nr_hw_queues().

Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25 14:12:20 -06:00
Bart Van Assche
ac0d6b926e block: Reduce the amount of memory required per request queue
Instead of always allocating at least nr_cpu_ids hardware queues per request
queue, reallocate q->queue_hw_ctx if it has to grow. This patch improves
behavior that was introduced by commit 868f2f0b72 ("blk-mq: dynamic h/w
context count").

Cc: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25 14:12:18 -06:00
Bart Van Assche
a9a808084d block: Remove the synchronize_rcu() call from __blk_mq_update_nr_hw_queues()
Since the blk_mq_{,un}freeze_queue() calls in __blk_mq_update_nr_hw_queues()
already serialize __blk_mq_update_nr_hw_queues() against
blk_mq_queue_tag_busy_iter(), the synchronize_rcu() call in
__blk_mq_update_nr_hw_queues() is not necessary. Hence remove it.

Note: the synchronize_rcu() call in __blk_mq_update_nr_hw_queues() was
introduced by commit f5bbbbe4d6 ("blk-mq: sync the update nr_hw_queues with
blk_mq_queue_tag_busy_iter"). Commit 530ca2c9bd ("blk-mq: Allow blocking
queue tag iter callbacks") removed the rcu_read_{,un}lock() calls that
correspond to the synchronize_rcu() call in __blk_mq_update_nr_hw_queues().

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25 14:12:17 -06:00