Add a simple test that validates that libbpf will reject isolated
struct_ops program early with helpful warning message.
Also validate that explicit use of such BPF program through BPF skeleton
after BPF object is open won't trigger any warnings.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-7-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Extend libbpf's pre-load checks for BPF programs, detecting more typical
conditions that are destinated to cause BPF program failure. This is an
opportunity to provide more helpful and actionable error message to
users, instead of potentially very confusing BPF verifier log and/or
error.
In this case, we detect struct_ops BPF program that was not referenced
anywhere, but still attempted to be loaded (according to libbpf logic).
Suggest that the program might need to be used in some struct_ops
variable. User will get a message of the following kind:
libbpf: prog 'test_1_forgotten': SEC("struct_ops") program isn't referenced anywhere, did you forget to use it?
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-6-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
strerror_r(), used from libbpf-specific libbpf_strerror_r() wrapper is
documented to return error in two different ways, depending on glibc
version. Take that into account when handling strerror_r()'s own errors,
which happens when we pass some non-standard (internal) kernel error to
it. Before this patch we'd have "ERROR: strerror_r(524)=22", which is
quite confusing. Now for the same situation we'll see a bit less
visually scary "unknown error (-524)".
At least we won't confuse user with irrelevant EINVAL (22).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-5-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add a test which tests the case that was just fixed. Kernel has full
type information about callback, but user explicitly nulls out the
reference to declaratively set BPF program reference.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-4-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
There is yet another corner case where user can set STRUCT_OPS program
reference in STRUCT_OPS map to NULL, but libbpf will fail to disable
autoload for such BPF program. This time it's the case of "new" kernel
which has type information about callback field, but user explicitly
nulled-out program reference from user-space after opening BPF object.
Fix, hopefully, the last remaining unhandled case.
Fixes: 0737df6de9 ("libbpf: better fix for handling nulled-out struct_ops program")
Fixes: f973fccd43 ("libbpf: handle nulled-out program in struct_ops correctly")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-3-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
libbpf ensures that BPF program references set in map->st_ops->progs[i]
during open phase are always valid STRUCT_OPS programs. This is done in
bpf_object__collect_st_ops_relos(). So there is no need to double-check
that in bpf_map__init_kern_struct_ops().
Simplify the code by removing unnecessary check. Also, we avoid using
local prog variable to keep code similar to the upcoming fix, which adds
similar logic in another part of bpf_map__init_kern_struct_ops().
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240507001335.1445325-2-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The test_xdp_noinline.c contains 2 functions that use more then 5
arguments. This patch collapses the 2 last arguments in an array.
Also in GCC and ipa_sra optimization increases the number of arguments
used in function encap_v4. This pass disables the optimization for that
particular file.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240507122220.207820-3-cupertino.miranda@oracle.com
This patch adds support to specify CFLAGS per source file and per test
runner.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240507122220.207820-2-cupertino.miranda@oracle.com
The vmlinux.h file generated by bpftool makes use of compiler pragmas
in order to install the CO-RE preserve_access_index in all the struct
types derived from the BTF info:
#ifndef __VMLINUX_H__
#define __VMLINUX_H__
#ifndef BPF_NO_PRESERVE_ACCESS_INDEX
#pragma clang attribute push (__attribute__((preserve_access_index)), apply_t = record
#endif
[... type definitions generated from kernel BTF ... ]
#ifndef BPF_NO_PRESERVE_ACCESS_INDEX
#pragma clang attribute pop
#endif
The `clang attribute push/pop' pragmas are specific to clang/llvm and
are not supported by GCC.
At the moment the BTF dumping services in libbpf do not support
dicriminating between types dumped because they are directly referred
and types dumped because they are dependencies. A suitable API is
being worked now. See [1] and [2].
In the interim, this patch changes the selftests/bpf Makefile so it
passes -DBPF_NO_PRESERVE_ACCESS_INDEX to GCC when it builds the
selftests. This workaround is temporary, and may have an impact on
the results of the GCC-built tests.
[1] https://lore.kernel.org/bpf/20240503111836.25275-1-jose.marchesi@oracle.com/T/#u
[2] https://lore.kernel.org/bpf/20240504205510.24785-1-jose.marchesi@oracle.com/T/#u
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240507095011.15867-1-jose.marchesi@oracle.com
This patch modifies selftests/bpf/Makefile to pass -Wno-attributes to
GCC. This is because of the following attributes which are ignored:
- btf_decl_tag
- btf_type_tag
There are many of these. At the moment none of these are
recognized/handled by gcc-bpf.
We are aware that btf_decl_tag is necessary for some of the
selftest harness to communicate test failure/success. Support for
it is in progress in GCC upstream:
https://gcc.gnu.org/pipermail/gcc-patches/2024-May/650482.html
However, the GCC master branch is not yet open, so the series
above (currently under review upstream) wont be able to make it
there until 14.1 gets released, probably mid next week.
As for btf_type_tag, more extensive work will be needed in GCC
upstream to support it in both BTF and DWARF. We have a WIP big
patch for that, but that is not needed to compile/build the
selftests.
- used
There are SEC macros defined in the selftests as:
#define SEC(N) __attribute__((section(N),used))
The SEC macro is used for both functions and global variables.
According to the GCC documentation `used' attribute is really only
meaningful for functions, and it warns when the attribute is used
for other global objects, like for example ctl_array in
test_xdp_noinline.c.
Ignoring this is benign.
- align_value
In progs/test_cls_redirect.c:127 there is:
typedef uint8_t *net_ptr __attribute__((align_value(8)));
GCC warns that it is ignoring this attribute, because it is not
implemented by GCC.
I think ignoring this attribute in GCC is benign, because according
to the clang documentation [1] its purpose seems to be merely
declarative and doesn't seem to translate into extra checks at
run-time, only to perhaps better optimized code ("runtime behavior
is undefined if the pointed memory object is not aligned to the
specified alignment").
[1] https://clang.llvm.org/docs/AttributeReference.html#align-value
Tested in bpf-next master.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240507074227.4523-3-jose.marchesi@oracle.com
An object defined as `static' defaults to hidden visibility. If
additionally the visibility(__weak__) compiler attribute is applied to
the declaration of the object, GCC warns that the attribute gets
ignored.
This patch removes the only instance of this problem among the BPF
selftests.
Tested in bpf-next master.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240507074227.4523-2-jose.marchesi@oracle.com
Added a test for bound computation in MUL when non constant
values are used and both registers have bounded ranges.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Link: https://lore.kernel.org/r/20240506141849.185293-7-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Added a test for bound computation in XOR and OR when non constant
values are used and both registers have bounded ranges.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Link: https://lore.kernel.org/r/20240506141849.185293-5-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When building either tools/bpf/bpftool, or tools/testing/selftests/hid,
(the same Makefile is used for these), clang generates many instances of
the following:
"clang: warning: -lLLVM-17: 'linker' input unused"
Quentin points out that the LLVM version is only required in $(LIBS),
not in $(CFLAGS), so the fix is to remove it from CFLAGS.
Suggested-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240505230054.13813-1-jhubbard@nvidia.com
Cast operation has a higher precedence than addition. The code here
wants to zero the 2nd half of the 64-bit metadata, but due to a pointer
arithmetic mistake, it writes the zero at offset 16 instead.
Just adding parentheses around "data + 4" would fix this, but I think
this will be slightly better readable with array syntax.
I was unable to test this with tools/testing/selftests/bpf/vmtest.sh,
because my glibc is newer than glibc in the provided VM image.
So I just checked the difference in the compiled code.
objdump -S tools/testing/selftests/bpf/xdp_do_redirect.test.o:
- *((__u32 *)data) = 0x42; /* metadata test value */
+ ((__u32 *)data)[0] = 0x42; /* metadata test value */
be7: 48 8d 85 30 fc ff ff lea -0x3d0(%rbp),%rax
bee: c7 00 42 00 00 00 movl $0x42,(%rax)
- *((__u32 *)data + 4) = 0;
+ ((__u32 *)data)[1] = 0;
bf4: 48 8d 85 30 fc ff ff lea -0x3d0(%rbp),%rax
- bfb: 48 83 c0 10 add $0x10,%rax
+ bfb: 48 83 c0 04 add $0x4,%rax
bff: c7 00 00 00 00 00 movl $0x0,(%rax)
Fixes: 5640b6d894 ("selftests/bpf: fix "metadata marker" getting overwritten by the netstack")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20240506145023.214248-1-mschmidt@redhat.com
The bpf programs that this patch changes require the BPF_PROG macro.
The BPF_PROG macro is defined in the libbpf's bpf_tracing.h.
Some tests include bpf_tcp_helpers.h which includes bpf_tracing.h.
They don't need other things from bpf_tcp_helpers.h other than
bpf_tracing.h. This patch simplifies it by directly including
the bpf_tracing.h.
The motivation of this unnecessary code churn is to retire
the bpf_tcp_helpers.h by directly using vmlinux.h. Right now,
the main usage of the bpf_tcp_helpers.h is the partial kernel
socket definitions (e.g. socket, sock, tcp_sock). While the test
cases continue to grow, fields are kept adding to those partial
socket definitions (e.g. the recent bpf_cc_cubic.c test which
tried to extend bpf_tcp_helpers.c but eventually used the
vmlinux.h instead).
The idea is to retire bpf_tcp_helpers.c and consistently use
vmlinux.h for the tests that require the kernel sockets. This
patch tackles the obvious tests that can directly use bpf_tracing.h
instead of bpf_tcp_helpers.h.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240504005045.848376-1-martin.lau@linux.dev
[Differences from V1:
- Do not introduce a global typedef, as this is a public header.
- Keep the void* casts in BPF_KPROBE_READ_RET_IP and
BPF_KRETPROBE_READ_RET_IP, as these are necessary
for converting to a const void* argument of
bpf_probe_read_kernel.]
The BPF_PROG, BPF_KPROBE and BPF_KSYSCALL macros defined in
tools/lib/bpf/bpf_tracing.h use a clever hack in order to provide a
convenient way to define entry points for BPF programs as if they were
normal C functions that get typed actual arguments, instead of as
elements in a single "context" array argument.
For example, PPF_PROGS allows writing:
SEC("struct_ops/cwnd_event")
void BPF_PROG(cwnd_event, struct sock *sk, enum tcp_ca_event event)
{
bbr_cwnd_event(sk, event);
dctcp_cwnd_event(sk, event);
cubictcp_cwnd_event(sk, event);
}
That expands into a pair of functions:
void ____cwnd_event (unsigned long long *ctx, struct sock *sk, enum tcp_ca_event event)
{
bbr_cwnd_event(sk, event);
dctcp_cwnd_event(sk, event);
cubictcp_cwnd_event(sk, event);
}
void cwnd_event (unsigned long long *ctx)
{
_Pragma("GCC diagnostic push")
_Pragma("GCC diagnostic ignored \"-Wint-conversion\"")
return ____cwnd_event(ctx, (void*)ctx[0], (void*)ctx[1]);
_Pragma("GCC diagnostic pop")
}
Note how the 64-bit unsigned integers in the incoming CTX get casted
to a void pointer, and then implicitly converted to whatever type of
the actual argument in the wrapped function. In this case:
Arg1: unsigned long long -> void * -> struct sock *
Arg2: unsigned long long -> void * -> enum tcp_ca_event
The behavior of GCC and clang when facing such conversions differ:
pointer -> pointer
Allowed by the C standard.
GCC: no warning nor error.
clang: no warning nor error.
pointer -> integer type
[C standard says the result of this conversion is implementation
defined, and it may lead to unaligned pointer etc.]
GCC: error: integer from pointer without a cast [-Wint-conversion]
clang: error: incompatible pointer to integer conversion [-Wint-conversion]
pointer -> enumerated type
GCC: error: incompatible types in assigment (*)
clang: error: incompatible pointer to integer conversion [-Wint-conversion]
These macros work because converting pointers to pointers is allowed,
and converting pointers to integers also works provided a suitable
integer type even if it is implementation defined, much like casting a
pointer to uintptr_t is guaranteed to work by the C standard. The
conversion errors emitted by both compilers by default are silenced by
the pragmas.
However, the GCC error marked with (*) above when assigning a pointer
to an enumerated value is not associated with the -Wint-conversion
warning, and it is not possible to turn it off.
This is preventing building the BPF kernel selftests with GCC.
This patch fixes this by avoiding intermediate casts to void*,
replaced with casts to `unsigned long long', which is an integer type
capable of safely store a BPF pointer, much like the standard
uintptr_t.
Testing performed in bpf-next master:
- vmtest.sh -- ./test_verifier
- vmtest.sh -- ./test_progs
- make M=samples/bpf
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240502170925.3194-1-jose.marchesi@oracle.com
The macro bpf_ksym_exists is defined in bpf_helpers.h as:
#define bpf_ksym_exists(sym) ({ \
_Static_assert(!__builtin_constant_p(!!sym), #sym " should be marked as __weak"); \
!!sym; \
})
The purpose of the macro is to determine whether a given symbol has
been defined, given the address of the object associated with the
symbol. It also has a compile-time check to make sure the object
whose address is passed to the macro has been declared as weak, which
makes the check on `sym' meaningful.
As it happens, the check for weak doesn't work in GCC in all cases,
because __builtin_constant_p not always folds at parse time when
optimizing. This is because optimizations that happen later in the
compilation process, like inlining, may make a previously non-constant
expression a constant. This results in errors like the following when
building the selftests with GCC:
bpf_helpers.h:190:24: error: expression in static assertion is not constant
190 | _Static_assert(!__builtin_constant_p(!!sym), #sym " should be marked as __weak"); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fortunately recent versions of GCC support a __builtin_has_attribute
that can be used to directly check for the __weak__ attribute. This
patch changes bpf_helpers.h to use that builtin when building with a
recent enough GCC, and to omit the check if GCC is too old to support
the builtin.
The macro used for GCC becomes:
#define bpf_ksym_exists(sym) ({ \
_Static_assert(__builtin_has_attribute (*sym, __weak__), #sym " should be marked as __weak"); \
!!sym; \
})
Note that since bpf_ksym_exists is designed to get the address of the
object associated with symbol SYM, we pass *sym to
__builtin_has_attribute instead of sym. When an expression is passed
to __builtin_has_attribute then it is the type of the passed
expression that is checked for the specified attribute. The
expression itself is not evaluated. This accommodates well with the
existing usages of the macro:
- For function objects:
struct task_struct *bpf_task_acquire(struct task_struct *p) __ksym __weak;
[...]
bpf_ksym_exists(bpf_task_acquire)
- For variable objects:
extern const struct rq runqueues __ksym __weak; /* typed */
[...]
bpf_ksym_exists(&runqueues)
Note also that BPF support was added in GCC 10 and support for
__builtin_has_attribute in GCC 9.
Locally tested in bpf-next master branch.
No regressions.
Signed-of-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240428112559.10518-1-jose.marchesi@oracle.com
Add INT_MAX check to ring_buffer__consume_n(). We do the similar check
to handle int return result of all these ring buffer APIs in other APIs
and ring_buffer__consume_n() is missing one. This patch fixes this
omission.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240430201952.888293-2-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
ringbuf_process_ring() return int64_t, while ring__consume_n() assigns
it to int. It's highly unlikely, but possible for ringbuf_process_ring()
to return value larger than INT_MAX, so use int64_t. ring__consume_n()
does check INT_MAX before returning int result to the user.
Fixes: 4d22ea94ea ("libbpf: Add ring__consume_n / ring_buffer__consume_n")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240430201952.888293-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch adds a selftest to show the usage of the new arguments in
cong_control. For simplicity's sake, the testing example reuses cubic's
kernel functions.
Signed-off-by: Miao Xu <miaxu@meta.com>
Link: https://lore.kernel.org/r/20240502042318.801932-4-miaxu@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch adds two new arguments for cong_control of struct
tcp_congestion_ops:
- ack
- flag
These two arguments are inherited from the caller tcp_cong_control in
tcp_intput.c. One use case of them is to update cwnd and pacing rate
inside cong_control based on the info they provide. For example, the
flag can be used to decide if it is the right time to raise or reduce a
sender's cwnd.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Miao Xu <miaxu@meta.com>
Link: https://lore.kernel.org/r/20240502042318.801932-2-miaxu@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch creates two sets of sock_ops that call out to the SYSCALL
hooks in the sock_addr_kern BPF program and uses them to construct
test cases for the range of supported operations (kernel_connect(),
kernel_bind(), kernel_sendms(), sock_sendmsg(), kernel_getsockname(),
kenel_getpeername()). This ensures that these interact with BPF sockaddr
hooks as intended.
Beyond this it also ensures that these operations do not modify their
address parameter, providing regression coverage for the issues
addressed by this set of patches:
- commit 0bdf399342c5("net: Avoid address overwrite in kernel_connect")
- commit 86a7e0b69bd5("net: prevent rewrite of msg_name in sock_sendmsg()")
- commit c889a99a21bf("net: prevent address rewrite in kernel_bind()")
- commit 01b2885d9415("net: Save and restore msg_namelen in sock_sendmsg")
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-7-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In order to reuse the same test code for both socket system calls (e.g.
connect(), bind(), etc.) and kernel socket functions (e.g.
kernel_connect(), kernel_bind(), etc.), this patch introduces the "ops"
field to sock_addr_test. This field allows each test cases to configure
the set of functions used in the test case to create, manipulate, and
tear down a socket.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-6-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch lays the groundwork for testing IPv4 and IPv6 sockaddr hooks
and their interaction with both socket syscalls and kernel functions
(e.g. kernel_connect, kernel_bind, etc.). It moves some of the test
cases from the old-style bpf/test_sock_addr.c self test into the
sock_addr prog_test in a step towards fully retiring
bpf/test_sock_addr.c. We will expand the test dimensions in the
sock_addr prog_test in a later patch series in order to migrate the
remaining test cases.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-5-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch lays out a set of SYSCALL programs that can be used to invoke
the socket operation kfuncs in bpf_testmod, allowing a test program to
manipulate kernel socket operations from userspace.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-4-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch adds a set of kfuncs to bpf_testmod that can be used to
manipulate a socket from kernel space.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-3-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Without this fix, the bind4 and bind6 programs will reject bind attempts
on big endian systems. This patch ensures that CI tests pass for the
s390x architecture.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-2-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
tools/lib/bpf/Makefile assumes that the patch in OUTPUT is a directory
and that it includes a trailing slash. This seems to be a common
expectation for OUTPUT among all the Makefiles.
In the rule for runqslower in tools/testing/selftests/bpf/Makefile the
variable BPFTOOL_OUTPUT is set to a directory name that lacks a
trailing slash. This results in a malformed BPF_HELPER_DEFS being
defined in lib/bpf/Makefile.
This problem becomes evident when a file like
tools/lib/bpf/bpf_tracing.h gets updated.
This patch fixes the problem by adding the missing slash in the value
for BPFTOOL_OUTPUT in the $(OUTPUT)/runqslower rule.
Regtested by running selftests in bpf-next master and building
samples/bpf programs.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240502140831.23915-1-jose.marchesi@oracle.com
We just failed to retrieve pattern, so we need to print spec instead.
Fixes: ddc6b04989 ("libbpf: Add bpf_program__attach_kprobe_multi_opts function")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240502075541.1425761-2-jolsa@kernel.org
We just failed to retrieve pattern, so we need to print spec instead.
Fixes: 2ca178f02b ("libbpf: Add support for kprobe session attach")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240502075541.1425761-1-jolsa@kernel.org
Previous attempt to fix the handling of nulled-out (from skeleton)
struct_ops program is working well only if struct_ops program is defined
as non-autoloaded by default (i.e., has SEC("?struct_ops") annotation,
with question mark).
Unfortunately, that fix is incomplete due to how
bpf_object_adjust_struct_ops_autoload() is marking referenced or
non-referenced struct_ops program as autoloaded (or not). Because
bpf_object_adjust_struct_ops_autoload() is run after
bpf_map__init_kern_struct_ops() step, which sets program slot to NULL,
such programs won't be considered "referenced", and so its autoload
property won't be changed.
This all sounds convoluted and it is, but the desire is to have as
natural behavior (as far as struct_ops usage is concerned) as possible.
This fix is redoing the original fix but makes it work for
autoloaded-by-default struct_ops programs as well. We achieve this by
forcing prog->autoload to false if prog was declaratively set for some
struct_ops map, but then nulled-out from skeleton (programmatically).
This achieves desired effect of not autoloading it. If such program is
still referenced somewhere else (different struct_ops map or different
callback field), it will get its autoload property adjusted by
bpf_object_adjust_struct_ops_autoload() later.
We also fix selftest, which accidentally used SEC("?struct_ops")
annotation. It was meant to use autoload-by-default program from the
very beginning.
Fixes: f973fccd43 ("libbpf: handle nulled-out program in struct_ops correctly")
Cc: Kui-Feng Lee <thinker.li@gmail.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240501041706.3712608-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The previous patch added support for the "module:function" syntax for
tracing programs. This adds tests for explicitly specifying the module
name via the SEC macro and via the bpf_program__set_attach_target call.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8a076168ed847f7c8a6c25715737b1fea84e38be.1714469650.git.vmalik@redhat.com
In some situations, it is useful to explicitly specify a kernel module
to search for a tracing program target (e.g. when a function of the same
name exists in multiple modules or in vmlinux).
This patch enables that by allowing the "module:function" syntax for the
find_kernel_btf_id function. Thanks to this, the syntax can be used both
from a SEC macro (i.e. `SEC(fentry/module:function)`) and via the
bpf_program__set_attach_target API call.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/9085a8cb9a552de98e554deb22ff7e977d025440.1714469650.git.vmalik@redhat.com
Protocol can be set by __start_server() helper directly now, this makes
the heler start_server_proto() useless.
This patch drops it, and implenments start_server() using make_sockaddr()
and __start_server().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/55d8a04e0bb8240a5fda2da3e9bdffe6fc8547b2.1714014697.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
start_mptcp_server() shouldn't be a public helper, it only be used in
MPTCP tests. This patch moves it into prog_tests/mptcp.c, and implenments
it using make_sockaddr() and start_server_addr() instead of using
start_server_proto().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/50ec7049e280c60a2924937940851f8fee2b73b8.1714014697.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Adding kprobe session test that verifies the cookie value
get properly propagated from entry to return program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-8-jolsa@kernel.org
Adding kprobe session test and testing that the entry program
return value controls execution of the return probe program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-7-jolsa@kernel.org
Adding kprobe session attach type name to attach_type_name,
so libbpf_bpf_attach_type_str returns proper string name for
BPF_TRACE_KPROBE_SESSION attach type.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-6-jolsa@kernel.org
Adding support to attach program in kprobe session mode
with bpf_program__attach_kprobe_multi_opts function.
Adding session bool to bpf_kprobe_multi_opts struct that allows
to load and attach the bpf program via kprobe session.
the attachment to create kprobe multi session.
Also adding new program loader section that allows:
SEC("kprobe.session/bpf_fentry_test*")
and loads/attaches kprobe program as kprobe session.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-5-jolsa@kernel.org
Adding support to attach bpf program for entry and return probe
of the same function. This is common use case which at the moment
requires to create two kprobe multi links.
Adding new BPF_TRACE_KPROBE_SESSION attach type that instructs
kernel to attach single link program to both entry and exit probe.
It's possible to control execution of the bpf program on return
probe simply by returning zero or non zero from the entry bpf
program execution to execute or not the bpf program on return
probe respectively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-2-jolsa@kernel.org
Some copy/paste leftover, this is never used.
Fixes: e3d9eac99a ("selftests/bpf: wq: add bpf_wq_init() checks")
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240430-bpf-next-v3-3-27afe7f3b17c@kernel.org
Add a selftests validating that it's possible to have some struct_ops
callback set declaratively, then disable it (by setting to NULL)
programmatically. Libbpf should detect that such program should
not be loaded. Otherwise, it will unnecessarily fail the loading
when the host kernel does not have the type information.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240428030954.3918764-2-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
If struct_ops has one of program callbacks set declaratively and host
kernel is old and doesn't support this callback, libbpf will allow to
load such struct_ops as long as that callback was explicitly nulled-out
(presumably through skeleton). This is all working correctly, except we
won't reset corresponding program slot to NULL before bailing out, which
will lead to libbpf not detecting that BPF program has to be not
auto-loaded. Fix this by unconditionally resetting corresponding program
slot to NULL.
Fixes: c911fc61a7 ("libbpf: Skip zeroed or null fields if not found in the kernel type.")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240428030954.3918764-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The strdup() function returns a pointer to a new string which is a
duplicate of the string "input". Memory for the new string is obtained
with malloc(), and need to be freed with free().
This patch adds these missing "free(input)" in parse_stats() to avoid
memory leak in veristat.c.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/ded44f8865cd7f337f52fc5fb0a5fbed7d6bd641.1714374022.git.tanggeliang@kylinos.cn
The strdup() function returns a pointer to a new string which is a
duplicate of the string "ptr". Memory for the new string is obtained
with malloc(), and need to be freed with free().
This patch adds these missing "free(ptr)" in check_whitelist() and
check_blacklist() to avoid memory leaks in test_sockmap.c.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/b76f2f4c550aebe4ab8ea73d23c4cbe4f06ea996.1714374022.git.tanggeliang@kylinos.cn
The cgroup1_hierarchy test uses setup_classid_environment to setup
cgroupv1 environment. The problem is that the environment is set in
/sys/fs/cgroup and therefore, if not run under an own mount namespace,
effectively deletes all system cgroups:
$ ls /sys/fs/cgroup | wc -l
27
$ sudo ./test_progs -t cgroup1_hierarchy
#41/1 cgroup1_hierarchy/test_cgroup1_hierarchy:OK
#41/2 cgroup1_hierarchy/test_root_cgid:OK
#41/3 cgroup1_hierarchy/test_invalid_level:OK
#41/4 cgroup1_hierarchy/test_invalid_cgid:OK
#41/5 cgroup1_hierarchy/test_invalid_hid:OK
#41/6 cgroup1_hierarchy/test_invalid_cgrp_name:OK
#41/7 cgroup1_hierarchy/test_invalid_cgrp_name2:OK
#41/8 cgroup1_hierarchy/test_sleepable_prog:OK
#41 cgroup1_hierarchy:OK
Summary: 1/8 PASSED, 0 SKIPPED, 0 FAILED
$ ls /sys/fs/cgroup | wc -l
1
To avoid this, run setup_cgroup_environment first which will create an
own mount namespace. This only affects the cgroupv1_hierarchy test as
all other cgroup1 test progs already run setup_cgroup_environment prior
to running setup_classid_environment.
Also add a comment to the header of setup_classid_environment to warn
against this invalid usage in future.
Fixes: 360769233c ("selftests/bpf: Add selftests for cgroup1 hierarchy")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240429112311.402497-1-vmalik@redhat.com
The verifier assumes that 'sk' field in 'struct socket' is valid
and non-NULL when 'socket' pointer itself is trusted and non-NULL.
That may not be the case when socket was just created and
passed to LSM socket_accept hook.
Fix this verifier assumption and adjust tests.
Reported-by: Liam Wisehart <liamwisehart@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Fixes: 6fcd486b3a ("bpf: Refactor RCU enforcement in the verifier.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20240427002544.68803-1-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
