mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-14 15:54:15 +08:00
7b4ea9456d
943628 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
7b4ea9456d |
Revert "x86/mm/64: Do not sync vmalloc/ioremap mappings"
This reverts commit
|
||
Linus Torvalds
|
6d2b84a4e5 |
This tree adds the sched_set_fifo*() encapsulation APIs to remove
static priority level knowledge from non-scheduler code. The three APIs for non-scheduler code to set SCHED_FIFO are: - sched_set_fifo() - sched_set_fifo_low() - sched_set_normal() These are two FIFO priority levels: default (high), and a 'low' priority level, plus sched_set_normal() to set the policy back to non-SCHED_FIFO. Since the changes affect a lot of non-scheduler code, we kept this in a separate tree. When merging to the latest upstream tree there's a conflict in drivers/spi/spi.c, which can be resolved via: sched_set_fifo(ctlr->kworker_task); Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl8pPQIRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1j0Jw/+LlSyX6gD2ATy3cizGL7DFPZogD5MVKTb IXbhXH/ACpuPQlBe1+haRLbJj6XfXqbOlAleVKt7eh+jZ1jYjC972RCSTO4566mJ 0v8Iy9kkEeb2TDbYx1H3bnk78lf85t0CB+sCzyKUYFuTrXU04eRj7MtN3vAQyRQU xJg83x/sT5DGdDTP50sL7lpbwk3INWkD0aDCJEaO/a9yHElMsTZiZBKoXxN/s30o FsfzW56jqtng771H2bo8ERN7+abwJg10crQU5mIaLhacNMETuz0NZ/f8fY/fydCL Ju8HAdNKNXyphWkAOmixQuyYtWKe2/GfbHg8hld0jmpwxkOSTgZjY+pFcv7/w306 g2l1TPOt8e1n5jbfnY3eig+9Kr8y0qHkXPfLfgRqKwMMaOqTTYixEzj+NdxEIRX9 Kr7oFAv6VEFfXGSpb5L1qyjIGVgQ5/JE/p3OC3GHEsw5VKiy5yjhNLoSmSGzdS61 1YurVvypSEUAn3DqTXgeGX76f0HH365fIKqmbFrUWxliF+YyflMhtrj2JFtejGzH Md3RgAzxusE9S6k3gw1ev4byh167bPBbY8jz0w3Gd7IBRKy9vo92h6ZRYIl6xeoC BU2To1IhCAydIr6hNsIiCSDTgiLbsYQzPuVVovUxNh+l1ZvKV2X+csEHhs8oW4pr 4BRU7dKL2NE= =/7JH -----END PGP SIGNATURE----- Merge tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched/fifo updates from Ingo Molnar: "This adds the sched_set_fifo*() encapsulation APIs to remove static priority level knowledge from non-scheduler code. The three APIs for non-scheduler code to set SCHED_FIFO are: - sched_set_fifo() - sched_set_fifo_low() - sched_set_normal() These are two FIFO priority levels: default (high), and a 'low' priority level, plus sched_set_normal() to set the policy back to non-SCHED_FIFO. Since the changes affect a lot of non-scheduler code, we kept this in a separate tree" * tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched,tracing: Convert to sched_set_fifo() sched: Remove sched_set_*() return value sched: Remove sched_setscheduler*() EXPORTs sched,psi: Convert to sched_set_fifo_low() sched,rcutorture: Convert to sched_set_fifo_low() sched,rcuperf: Convert to sched_set_fifo_low() sched,locktorture: Convert to sched_set_fifo() sched,irq: Convert to sched_set_fifo() sched,watchdog: Convert to sched_set_fifo() sched,serial: Convert to sched_set_fifo() sched,powerclamp: Convert to sched_set_fifo() sched,ion: Convert to sched_set_normal() sched,powercap: Convert to sched_set_fifo*() sched,spi: Convert to sched_set_fifo*() sched,mmc: Convert to sched_set_fifo*() sched,ivtv: Convert to sched_set_fifo*() sched,drm/scheduler: Convert to sched_set_fifo*() sched,msm: Convert to sched_set_fifo*() sched,psci: Convert to sched_set_fifo*() sched,drbd: Convert to sched_set_fifo*() ... |
||
Linus Torvalds
|
4cec929370 |
integrity-v5.9
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEEjSMCCC7+cjo3nszSa3kkZrA+cVoFAl8puJgUHHpvaGFyQGxp bnV4LmlibS5jb20ACgkQa3kkZrA+cVq47w//VDg2pTD+/fPadleRJkKVSPaKJu4k N/gAVPxhYpJVJ+BTZKMFzTjX3kjfQG7udjORzC+saEdii7W1EfJJqHabLEnihfxd VDUS0RQndMwOkioAAZOsy5dFE84wUOX8O1kq31Aw2G+QLCYhn1dNMg10j6SBM034 cJbS59k3w+lyqFy/Fje8e7aO1xmc/83x9MfLgzZTscCZqzf1vIJY8onwfTxRVBpQ QS0AZJM+b0+9MlJxpzBYxZARwYb5cXBLh07W/vBFmJRh15n0e20uWM4YFkBixicX gi3LtXd/75hFIHgm6QqbwDJrrA45zOJs5YsOudCctWVAe5k5mV0H7ysJ6phcRI9E uQvBb7Z+0viQXis6Cjx4gYSYAcAJPcDrfcjR4itQSOj5anUFBvCju+Jr373S0Vn8 3eXGyimRAc33vEFkI7RJNfExkGh7pkYWzcruk90bHD6dAKuki/tisIs7ZvhTuFOp eyWt7hbctqbt/gESop3zXjUDRJsX9GyAA4OvJwFGRfRJ4ziQ5w8LGc+VendSWald 1zjkJxXAZLjDPQlYv2074PYeIguTbcDkjeRVxUD9mWvdi0tyXK+r2qC+PeX7Rs71 y1aGIT/NX9qYI2H0xIm3ettztdIE8F1tnAn2ziNkQiXEzCrEqKtAAxxSErTQuB78 LMgCDPF8y06ZjD8= =M/tq -----END PGP SIGNATURE----- Merge tag 'integrity-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "The nicest change is the IMA policy rule checking. The other changes include allowing the kexec boot cmdline line measure policy rules to be defined in terms of the inode associated with the kexec kernel image, making the IMA_APPRAISE_BOOTPARAM, which governs the IMA appraise mode (log, fix, enforce), a runtime decision based on the secure boot mode of the system, and including errno in the audit log" * tag 'integrity-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: integrity: remove redundant initialization of variable ret ima: move APPRAISE_BOOTPARAM dependency on ARCH_POLICY to runtime ima: AppArmor satisfies the audit rule requirements ima: Rename internal filter rule functions ima: Support additional conditionals in the KEXEC_CMDLINE hook function ima: Use the common function to detect LSM conditionals in a rule ima: Move comprehensive rule validation checks out of the token parser ima: Use correct type for the args_p member of ima_rule_entry.lsm elements ima: Shallow copy the args_p member of ima_rule_entry.lsm elements ima: Fail rule parsing when appraise_flag=blacklist is unsupportable ima: Fail rule parsing when the KEY_CHECK hook is combined with an invalid cond ima: Fail rule parsing when the KEXEC_CMDLINE hook is combined with an invalid cond ima: Fail rule parsing when buffer hook functions have an invalid action ima: Free the entire rule if it fails to parse ima: Free the entire rule when deleting a list of rules ima: Have the LSM free its audit rule IMA: Add audit log for failure conditions integrity: Add errno field in audit message |
||
Linus Torvalds
|
e3243e2a27 |
Merge branch 'for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall: "New semantic patches and semantic patch improvements from Denis Efremov" * 'for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: coccinelle: api: filter out memdup_user definitions coccinelle: api: extend memdup_user rule with vmemdup_user() coccinelle: api: extend memdup_user transformation with GFP_USER coccinelle: api: add kzfree script coccinelle: misc: add array_size_dup script to detect missed overflow checks coccinelle: api/kstrdup: fix coccinelle position coccinelle: api: add device_attr_show script |
||
Linus Torvalds
|
1e21b5c739 |
Livepatching changes for 5.9
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAl8ruxsACgkQUqAMR0iA lPJyeQ/+IjRLKqM8QFv/vZDjhIHFOMR64wfNso3Jh6BhMCL38Ow1LISUqNSoBLQP eHJF42KlZG4EWwUdXM1ZnRvp/BXl9urkcQUG1Q26tlNsa58UMbntXIIjzk9YucOw Q6HBzURZ09KLvVHxddOG1V4wEHWpIGrS3siwBQTrvhhkgLfSteX632TAGC+Gizwj dIleRfFiB1xYhMZg7Ej8b+yImlHj1FO+L3IHq/JgBSjDP5hKkAX16phmmflo8WKZ ozSU6AqJVdBAYdR1I6xhkFUGwcYjcjPb1MrAeFMDv0YrgbWZNv30k6EpIW/Az5QI tlw9gZ4EgdnYZ0iG5h8B1MfnRvsr7fYthnLj7wDTuBs1wMkm8kH+YOKGHS+ihjLO Gg8cC5V4iN07gA/KjKngdoYUOD1IjvWTLj6mB70qWVnYRIz5UveaER3J+kWNC5gU Jpw9TlcW05Fa9XQf6ChLG9cBj0QyWMSlhl6vQp45b0Z0wgQcpddIZC6TRRlwmgak DpESQWF3P4FUAFjR/lGizpCsTB1VTp0ghmQ7geT0y1LbF0WDXV1WvaKGR5RmClv4 KVTs9DBCji0zBc5GfdV/0s8A0Ub9g3wdNy1WYRZAm7LIXn/zwNI8I5vH/U140Bd1 qkL4FYxA8lh8+Wy6qk2rM8/5KX5EsxysN8lyebrY7xNR5+ObSYQ= =oQEB -----END PGP SIGNATURE----- Merge tag 'livepatching-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Petr Mladek: "Improvements and cleanups of livepatching selftests" * tag 'livepatching-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: selftests/livepatch: adopt to newer sysctl error format selftests/livepatch: Use "comm" instead of "diff" for dmesg selftests/livepatch: add test delimiter to dmesg selftests/livepatch: refine dmesg 'taints' in dmesg comparison selftests/livepatch: Don't clear dmesg when running tests selftests/livepatch: fix mem leaks in test-klp-shadow-vars selftests/livepatch: more verification in test-klp-shadow-vars selftests/livepatch: rework test-klp-shadow-vars selftests/livepatch: simplify test-klp-callbacks busy target tests |
||
Linus Torvalds
|
bfdd5aaa54 |
Smack fixes for 5.9
-----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEC+9tH1YyUwIQzUIeOKUVfIxDyBEFAl8pmVMXHGNhc2V5QHNj aGF1Zmxlci1jYS5jb20ACgkQOKUVfIxDyBE4tA/7BvMGZjrGVu7F8oOJGam6xiQ+ iVczarvuH9HUfIWWKytgAZXaNf8/lQvpTGYjJFdLGVaLVfB4CSrrrdOGlfvZGpZ/ 5CXeSMAAUOAmYnqjSXFuLqp0NJEEwBg0L7/YWGbp/fq7t8WcY73esDRpVw/R78fV rOSMq+qt+IKRERUZWHa3gY7/FDA1/KnEkXjcMViM9PN3Gi5u2Fw6IMVWugPYJYrh 86jlrDxYV3ceqDpoiHGyulMcBk/f/GppjIWz4ihZ0YShn+ZgAXsnJGjEhGxsoSXb CdG0O0y/m6y/+ekyovhvL8+AymfVWbK3qzE8IxWp8Xbrd882naur0c0vTG6y2eF7 Z2HnI3ivusNrKTkXQnzC86YJ0T96Pg9OCab5poSIsWK5bM542dKZ/7KoSDfzIfBH uPhTY2PyRSiUiCWpt7esHtp4mYwCGqUs2j80TZDb8ptAZbYKxzC0pFIDoFeEyOM4 FDBXjH8Bo+eEG9V8OgGeVvluYaat+C00dba9fiOT7/Tm0F9KqOJEOO9uJPV9CuJN +jrL90mopy8T0bygqMjp+GB5V13IGL5+NDHZcnO3Ij5jI/7q0TQ6FlFZ4tg4o4yM Y7FyMF+ybUlRod0ayYgurtxn91c0E/PTOPSqtL/RKtRLbLdGrOM3Rfbxn9rREONY h1/RmmX5jSBQOKNq9/Y= =ZoLN -----END PGP SIGNATURE----- Merge tag 'Smack-for-5.9' of git://github.com/cschaufler/smack-next Pull smack updates from Casey Schaufler: "Minor fixes to Smack for the v5.9 release. All were found by automated checkers and have straightforward resolution" * tag 'Smack-for-5.9' of git://github.com/cschaufler/smack-next: Smack: prevent underflow in smk_set_cipso() Smack: fix another vsscanf out of bounds Smack: fix use-after-free in smk_write_relabel_self() |
||
Linus Torvalds
|
b62e419707 |
MIPS upates for v5.9
- improvements for Loongson64 - extended ingenic support - removal of not maintained paravirt system type - cleanups and fixes -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAl8sOj8aHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHDaKxAAj2Ptqna21sGQaRW3wQ4L Bt41xZUw5m62DjAfd2j8w6PkJLvwcXx8y5v7ZpA79fLFJcDNzBgZzmjfqVxGue6P j1Ei/Bc1UPF6s+hsjjr7IJG3Y50CKD1AY0VgKzZzY42NhCkkOVlzyUh0wER/COhG jDAJtkrtFJeyNx2x+aWV5ILg2HTFsjCDfkLlwDWZdhMLa4XuDJoruRDBjQ8RVTs8 NsYANHaO8M1I/x9aGDpiQbE5j11WSm/GrA154ivIpenLHT+lx4HWoEjfLskIG0Bx n+bMuUUdHw/T0dpj/51/eCIoaSXzEEMgLo5K5vowaikY/Q6++M+ePSQw6ohxFQ/q PPWNJIilpufw6Utvkdzw6j/oGB65k1Tz1gxlQRVeF9vWf/qLW1O7gTuKJDebjPnH 3f+NfqlKuygF4zV0RJ4Kk5k0S+C6h8Q6qTlAZe4G2Ixcy1AV8USd+RBacwdSxzvE z7c7wovHpIhvZ8Zkheli0WeB0DKX5KH8H1GcFki/fZ748qP02cfzkZ8sU4n3OF93 6z3AdShnDb9sCTB4trSXe7EvwVrirYbUtCPNCCRWgIZrJFVuw/2L197IzYF94mTE ilqJ121hL7ETr7Wk8+HTOMbLUaYnh7Dt842Y7RvOEOzPhN9dlvMcABimpaIHf1rp 45aCNTwT6V5og2v73UhqTmk= =I/vU -----END PGP SIGNATURE----- Merge tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS upates from Thomas Bogendoerfer: - improvements for Loongson64 - extended ingenic support - removal of not maintained paravirt system type - cleanups and fixes * tag 'mips_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (81 commits) MIPS: SGI-IP27: always enable NUMA in Kconfig MAINTAINERS: Update KVM/MIPS maintainers MIPS: Update default config file for Loongson-3 MIPS: KVM: Add kvm guest support for Loongson-3 dt-bindings: mips: Document Loongson kvm guest board MIPS: handle Loongson-specific GSExc exception MIPS: add definitions for Loongson-specific CP0.Diag1 register MIPS: only register FTLBPar exception handler for supported models MIPS: ingenic: Hardcode mem size for qi,lb60 board MIPS: DTS: ingenic/qi,lb60: Add model and memory node MIPS: ingenic: Use fw_passed_dtb even if CONFIG_BUILTIN_DTB MIPS: head.S: Init fw_passed_dtb to builtin DTB of: address: Fix parser address/size cells initialization of_address: Guard of_bus_pci_get_flags with CONFIG_PCI MIPS: DTS: Fix number of msi vectors for Loongson64G MIPS: Loongson64: Add ISA node for LS7A PCH MIPS: Loongson64: DTS: Fix ISA and PCI I/O ranges for RS780E PCH MIPS: Loongson64: Enlarge IO_SPACE_LIMIT MIPS: Loongson64: Process ISA Node in DeviceTree of_address: Add bus type match for pci ranges parser ... |
||
Linus Torvalds
|
40ddad1913 |
ARM development for 5.9-rc1:
- add arch/arm/Kbuild from Masahiro Yamada. - simplify act_mm macro, since it contains an open-coded get_thread_info. - VFP updates for Clang from Stefan Agner. - Fix unwinder for Clang from Nathan Huckleberry. - Remove unused it8152 PCI host controller, used by the removed cm-x2xx platforms from Mike Rapoport. - Further explanation of __range_ok(). - Remove kimage_voffset that isn't used anymore from Marc Zyngier. - Drop ancient Thumb-2 workaround for old binutils from Ard Biesheuvel. - Documentation cleanup for mach-* from Pete Zaitcev. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAl8sOXMACgkQ9OeQG+St rGRFCBAAlBOdZmiB4/UW59LEdBRhNg4C0HNQmOxQqp6oMZLw9Whu3SDHeBePVvqA gp8z3rJL6N6XhSmv0dplWxgX2FrBfscjlwa7wLcwtz1NCTeGT1xL6s2dwH2q8Ocw swfcFhdFiJ+ewtylfYqogGPQyFXOPnTGv7B/cH+IX1kP0OcpgDb+pDy24MrrrD4r 6DC8fIkZtDcvABJGSEthiMx29Pn1jbGAZWW3acVDtnMgppzB6brMH/A1HirMo0G9 qGxejqJ+/DgsQciRBxfSI2N4U42XRVacW1vGdN19tFWYhHNStx9PnV9JHo61sQFM UiI1fARat8dlY8qT72binE1gbDZ4HOLJ5181BjDEchoO/qnxxi0tOlOlFO6PB0fz innRDC5TGLjBb/9B5YkHLSoDDo0erovJUV1m1pz/T9Dd6rO+1BV6Q2GI312dxLVR IfRJ8PVI9WZaYjZgxp14m1l0tRNI0BJoRT6QjADwAxo5leRFho6KbsfAgNCm8/ni lfqo3kHrLnd3pojljiuvW8/oBdqYTA86VAlfzyJ/rFOHMlROeFGCoCDqsBeqR1gZ pX3zQU5Jf8pJXsXaM1hXO/CcK61Nr4/m18uyjLpJeyYNJWz3CZ/hndhLJR91cShT hTP1bB/UQlprOP6CgjTPj1MCCA9HCRCo8k5y/s9VKpMZ8SM9Ghw= =RWzO -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM updates from Russell King: - add arch/arm/Kbuild from Masahiro Yamada. - simplify act_mm macro, since it contains an open-coded get_thread_info. - VFP updates for Clang from Stefan Agner. - Fix unwinder for Clang from Nathan Huckleberry. - Remove unused it8152 PCI host controller, used by the removed cm-x2xx platforms from Mike Rapoport. - Further explanation of __range_ok(). - Remove kimage_voffset that isn't used anymore from Marc Zyngier. - Drop ancient Thumb-2 workaround for old binutils from Ard Biesheuvel. - Documentation cleanup for mach-* from Pete Zaitcev. * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8996/1: Documentation/Clean up the description of mach-<class> ARM: 8995/1: drop Thumb-2 workaround for ancient binutils ARM: 8994/1: mm: drop kimage_voffset which was only used by KVM ARM: uaccess: add further explanation of __range_ok() ARM: 8993/1: remove it8152 PCI controller driver ARM: 8992/1: Fix unwind_frame for clang-built kernels ARM: 8991/1: use VFP assembler mnemonics if available ARM: 8990/1: use VFP assembler mnemonics in register load/store macros ARM: 8989/1: use .fpu assembler directives instead of assembler arguments ARM: 8982/1: mm: Simplify act_mm macro ARM: 8981/1: add arch/arm/Kbuild |
||
Linus Torvalds
|
2044513ffe |
arch/csky patches for 5.9-rc1
Features: - seccomp-filter - err-injection - top-down&random mmap-layout - irq_work - show_ipi - context-tracking) Fixup & Optimize: - kprobe_on_ftrace - optimize panic print -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE2KAv+isbWR/viAKHAXH1GYaIxXsFAl8rSUESHHJlbl9ndW9A Yy1za3kuY29tAAoJEAFx9RmGiMV7REoP/jABI6Xa3YH5Xfh4Xmr/CSM7vYMMMjsc 2+t1tJ9EHrOR4wEhG6bX8C2uGwtnwb9u5B9JY1fQ9nbrLtKPNlhpq9ukOmztOqEp EuAZZ3NildOKdRwyK4SaV3Mf1TbPg75EX7u/MuwQuTy3dKqvSu3VigJ3XN2VvpOz orbRID0FMYAG76QCqCm3ddrUD/Jm6IIeMpCxEF5VT05+OBdmmuYS6uOF8Cmm432F OX2WZhoo8vjNe+orVPxNxTojuBXve/ygHGLq7CSMZuoJdoArQKKD7+fpAupDR9qq LWZMqfYRmIPXsWT/MlZVb/w2AHDKvZXPWvDT7Imw3Y7A/jMNd4zbULXt0S3Pq3Y/ LMC8SvC9Ag5GZLKPKj3f+1G4rr3h/WT4Ey6QURiHoxEVO91tdRyRY5JMjDf0W18K XMl4pDEbFHNGl8Ph+fBeTwTNCsH2PkHP8ESUHLIw+2wbNSk+9XvjGJ7dC3wffVp4 oZcGB/8EPLGxTgM+pXfiP1M39B58ku+Duf1iNXXx3RDA7znSpVRCAmCk2jXygXmH NsRBg/lNxD7ZeHLbH1qIbROzIRV1scvnt5iUM8J15SnW21xK3VisrcHUWiB7xHrr u0lLAW0mG1wpK78TXIO7jlHYMgy5er5pMIGJ9e2UJHYJ13h8p1s6PKXSXERprSjc 0HqOLF0bxcse =l7rw -----END PGP SIGNATURE----- Merge tag 'csky-for-linus-5.9-rc1' of https://github.com/c-sky/csky-linux Pull arch/csky updates from Guo Ren: "New features: - seccomp-filter - err-injection - top-down&random mmap-layout - irq_work - show_ipi - context-tracking Fixes & Optimizations: - kprobe_on_ftrace - optimize panic print" * tag 'csky-for-linus-5.9-rc1' of https://github.com/c-sky/csky-linux: csky: Add context tracking support csky: Add arch_show_interrupts for IPI interrupts csky: Add irq_work support csky: Fixup warning by EXPORT_SYMBOL(kmap) csky: Set CONFIG_NR_CPU 4 as default csky: Use top-down mmap layout csky: Optimize the trap processing flow csky: Add support for function error injection csky: Fixup kprobes handler couldn't change pc csky: Fixup duplicated restore sp in RESTORE_REGS_FTRACE csky: Add cpu feature register hint for smp csky: Add SECCOMP_FILTER supported csky: remove unusued thread_saved_pc and *_segments functions/macros |
||
Linus Torvalds
|
bbcf9cd157 |
Xtensa updates for v5.9:
- add syscall audit support - add seccomp filter support - clean up make rules under arch/xtensa/boot - fix state management for exclusive access opcodes - fix build with PMU enabled -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAl8q2YsTHGpjbXZia2Jj QGdtYWlsLmNvbQAKCRBR+cyR+D+gRPbID/9G6Ck59fsl62MGyqNeEmZV3Wro+tx7 7OlqN7KF20MgZMpure+NY2gTG+n3DwDdmEiiJ4aBzSY0Bg/R6SGubvAn6d+cBZG8 Wfd/bFTW390/FVaPNtveef8cJ9qlfqnGTQgTJ97LVoopnbIWm+aDHfyyb+2Td/c8 eIbhBmKOY1mZD8prnLZoVfXt7kuRrDDumBrRUwpIG/6O5sa+Q5xCj6KxNDlYqMMq /gi7BEVnDKz6cjXswmJYVkoPFdpJQ6dYEdfqkp+uoEb3i66qOcqB8JKppLdhjZy0 MayL4t7xT+0PxDRQ7eU+TONVHdZxIgu9BKDpREC+xhKLBx2q0U0i/KMWOHnRdJry AWJtDgiQmPzYuNEAlSDndxPmpDQptFIExJ6aKu0vWafv2XwTw5ukcksDh9bP6r8e XnxQasiDooAcnW+ByILXyi8a2kOUGTyaM1JMKNtevLVmp4h36I7K9F++Xr9a/R/R W+as2D4Tp0XX2yutDh5BvjSs5+BokGKj2CdlKpVA1CsrDeTXkjncNgyL84LXId/l v7hm2mjsNwrtOvr8SiMiV7I/1k+5MhYfxxNrqMsUpXvvzR2TGJZzN4dLdW/IbvY4 mkBoVcGeaa7KODRIXYbnh9sjAx2fJDgkQHjbo9S4RB2csxXdWcgbeXKt6ijkMOwz YzLhnJ/Bb7UqlQ== =nN46 -----END PGP SIGNATURE----- Merge tag 'xtensa-20200805' of git://github.com/jcmvbkbc/linux-xtensa Pull Xtensa updates from Max Filippov: - add syscall audit support - add seccomp filter support - clean up make rules under arch/xtensa/boot - fix state management for exclusive access opcodes - fix build with PMU enabled * tag 'xtensa-20200805' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: add missing exclusive access state management xtensa: fix xtensa_pmu_setup prototype xtensa: add boot subdirectories build artifacts to 'targets' xtensa: add uImage and xipImage to targets xtensa: move vmlinux.bin[.gz] to boot subdirectory xtensa: initialize_mmu.h: fix a duplicated word selftests/seccomp: add xtensa support xtensa: add seccomp support xtensa: expose syscall through user_pt_regs xtensa: add audit support |
||
Linus Torvalds
|
9ab9bc5115 |
hyperv-next for 5.9
-----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl8pNiATHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXuoQCACiOoe/FKHAYZDR6fZzwZSNVJueYu1o Pnwj00EjeDWM/M4kmF7u0PVv0v8PlP7fi2b0nvGmOeqwFS4n7Xr6mdDO1ZxRDzpd QW9ZoLc8OUpg9UU9WlEqj4IqRalwKsZi0eX3P2jGoeQCEXHcRu5AdjkDYk0s/LNq GBAtpHEPADu/uhEVMyya1KrY9DXsgybPGbCml1pZpeNLPbph3m2ld1M0aHJXqap9 1qBykxPgCSkSd270XfUrHCkYariC/g7khnBP0zAkzsgt90uraqKoUNhihN8GFacF eZ6oh45LWWUjCNIAzKBiLlrpt7nuOGQszeIZywAuyvkbo0pdlZ+hu1qB =FMf5 -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - A patch series from Andrea to improve vmbus code - Two clean-up patches from Alexander and Randy * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hyperv: hyperv.h: drop a duplicated word tools: hv: change http to https in hv_kvp_daemon.c Drivers: hv: vmbus: Remove the lock field from the vmbus_channel struct scsi: storvsc: Introduce the per-storvsc_device spinlock Drivers: hv: vmbus: Remove unnecessary channel->lock critical sections (sc_list updaters) Drivers: hv: vmbus: Use channel_mutex in channel_vp_mapping_show() Drivers: hv: vmbus: Remove unnecessary channel->lock critical sections (sc_list readers) Drivers: hv: vmbus: Replace cpumask_test_cpu(, cpu_online_mask) with cpu_online() Drivers: hv: vmbus: Remove the numa_node field from the vmbus_channel struct Drivers: hv: vmbus: Remove the target_vp field from the vmbus_channel struct |
||
Linus Torvalds
|
47ec5303d7 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ... |
||
Linus Torvalds
|
8186749621 |
drm next for 5.9-rc1
core: - add user def flag to cmd line modes - dma_fence_wait added might_sleep - dma-fence lockdep annotations - indefinite fences are bad documentation - gem CMA functions used in more drivers - struct mutex removal - more drm_ debug macro usage - set/drop master api fixes - fix for drm/mm hole size comparison - drm/mm remove invalid entry optimization - optimise drm/mm hole handling - VRR debugfs added - uncompressed AFBC modifier support - multiple display id blocks in EDID - multiple driver sg handling fixes - __drm_atomic_helper_crtc_reset in all drivers - managed vram helpers ttm: - ttm_mem_reg handling cleanup - remove bo offset field - drop CMA memtype flag - drop mappable flag xilinx: - New Xilinx ZynqMP DisplayPort Subsystem driver nouveau: - add CRC support - start using NVIDIA published class header files - convert all push buffer emission to new macros - Proper push buffer space management for EVO/NVD channels. - firmware loading fixes - 2MiB system memory pages support on Pascal and newer vkms: - larget cursor support i915: - Rocketlake platform enablement - Early DG1 enablement - Numerous GEM refactorings - DP MST fixes - FBC, PSR, Cursor, Color, Gamma fixes - TGL, RKL, EHL workaround updates - TGL 8K display support fixes - SDVO/HDMI/DVI fixes amdgpu: - Initial support for Sienna Cichlid GPU - Initial support for Navy Flounder GPU - SI UVD/VCE support - expose rotation property - Add support for unique id on Arcturus - Enable runtime PM on vega10 boards that support BACO - Skip BAR resizing if the bios already did id - Major swSMU code cleanup - Fixes for DCN bandwidth calculations amdkfd: - Track SDMA usage per process - SMI events interface radeon: - Default to on chip GART for AGP boards on all arches - Runtime PM reference count fixes msm: - headers regenerated causing churn - a650/a640 display and GPU enablement - dpu dither support for 6bpc panels - dpu cursor fix - dsi/mdp5 enablement for sdm630/sdm636/sdm66 tegra: - video capture prep support - reflection support mediatek: - convert mtk_dsi to bridge API meson: - FBC support sun4i: - iommu support rockchip: - register locking fix - per-pixel alpha support PX30 VOP - mgag200: - ported to simple and shmem helpers - device init cleanups - use managed pci functions - dropped hw cursor support ast: - use managed pci functions - use managed VRAM helpers - rework cursor support malidp: - dev_groups support hibmc: - refactor hibmc_drv_vdac: vc4: - create TXP CRTC imx: - error path fixes and cleanups etnaviv: - clock handling and error handling cleanups - use pin_user_pages -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJfK1atAAoJEAx081l5xIa+vDkQAJvl/mjbEA7fDy8Ysa0cgPLI 8nI4Bo/MaxkyRfUcP8+f/n3QQrRME37C0xa/Mn6SG1oFAdlovPwDqmDr5kjhkrMI geo8oJb2Q+AsrJr+ejpuF+iq0FxWi64bLbwJFJ2nBet+lHTMzoPceWeq3gG1Vvfl h6PV4B/9TjrnbhcKLIQSEmJ0kZp9uMkDBF/iynVn4+AKAkG1rQNjigdTH48IFPoz 28KuqG0B4NWu648zYXhjsN0kD3Dxjv3YOH+FsoWQpQa9icCTySYbySsQ7l0/XvA3 4BPtP3rWMhU46FHTBkWF72WQR4F0B4wm5DJJKMeG4vb1mXakOqAKcAq7JAbka+wL PBIiU+AcAKRSiwHmYDuDWtDoSpvYncuo0p3IvNP5hhih+7hqCnLIULDWS+V8AUzW 39usS/DXsVKk/HGYIYC89cRwsqWYD4c7edzOBdPQxW4LNYCD2gXezLJ5TeeR2lih y9JIVnPiluWleOovs4W3BoZNRuLc1rHBO6COToXjlme/48Z+sRHBAoge6UZurqRN jr+e60cS7n/DOeJQuNf4UHZnK48Pc24+3kVfMHlX+OKn8VuKPGr+USkeHV/NYL/B USiKCAxkkZM0dxerSb1/Ra9kGnchf0QBpA6Fsem8kV61Z4GVc+K6xJWg7KXB6n/3 7ZyalUKLwlOCz9sYsCCe =Yvtd -----END PGP SIGNATURE----- Merge tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "New xilinx displayport driver, AMD support for two new GPUs (more header files), i915 initial support for RocketLake and some work on their DG1 (discrete chip). The core also grew some lockdep annotations to try and constrain what drivers do with dma-fences, and added some documentation on why the idea of indefinite fences doesn't work. The long list is below. I do have some fixes trees outstanding, but I'll follow up with those later. core: - add user def flag to cmd line modes - dma_fence_wait added might_sleep - dma-fence lockdep annotations - indefinite fences are bad documentation - gem CMA functions used in more drivers - struct mutex removal - more drm_ debug macro usage - set/drop master api fixes - fix for drm/mm hole size comparison - drm/mm remove invalid entry optimization - optimise drm/mm hole handling - VRR debugfs added - uncompressed AFBC modifier support - multiple display id blocks in EDID - multiple driver sg handling fixes - __drm_atomic_helper_crtc_reset in all drivers - managed vram helpers ttm: - ttm_mem_reg handling cleanup - remove bo offset field - drop CMA memtype flag - drop mappable flag xilinx: - New Xilinx ZynqMP DisplayPort Subsystem driver nouveau: - add CRC support - start using NVIDIA published class header files - convert all push buffer emission to new macros - Proper push buffer space management for EVO/NVD channels. - firmware loading fixes - 2MiB system memory pages support on Pascal and newer vkms: - larger cursor support i915: - Rocketlake platform enablement - Early DG1 enablement - Numerous GEM refactorings - DP MST fixes - FBC, PSR, Cursor, Color, Gamma fixes - TGL, RKL, EHL workaround updates - TGL 8K display support fixes - SDVO/HDMI/DVI fixes amdgpu: - Initial support for Sienna Cichlid GPU - Initial support for Navy Flounder GPU - SI UVD/VCE support - expose rotation property - Add support for unique id on Arcturus - Enable runtime PM on vega10 boards that support BACO - Skip BAR resizing if the bios already did id - Major swSMU code cleanup - Fixes for DCN bandwidth calculations amdkfd: - Track SDMA usage per process - SMI events interface radeon: - Default to on chip GART for AGP boards on all arches - Runtime PM reference count fixes msm: - headers regenerated causing churn - a650/a640 display and GPU enablement - dpu dither support for 6bpc panels - dpu cursor fix - dsi/mdp5 enablement for sdm630/sdm636/sdm66 tegra: - video capture prep support - reflection support mediatek: - convert mtk_dsi to bridge API meson: - FBC support sun4i: - iommu support rockchip: - register locking fix - per-pixel alpha support PX30 VOP mgag200: - ported to simple and shmem helpers - device init cleanups - use managed pci functions - dropped hw cursor support ast: - use managed pci functions - use managed VRAM helpers - rework cursor support malidp: - dev_groups support hibmc: - refactor hibmc_drv_vdac: vc4: - create TXP CRTC imx: - error path fixes and cleanups etnaviv: - clock handling and error handling cleanups - use pin_user_pages" * tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits) drm/msm: use kthread_create_worker instead of kthread_run drm/msm/mdp5: Add MDP5 configuration for SDM636/660 drm/msm/dsi: Add DSI configuration for SDM660 drm/msm/mdp5: Add MDP5 configuration for SDM630 drm/msm/dsi: Add phy configuration for SDM630/636/660 drm/msm/a6xx: add A640/A650 hwcg drm/msm/a6xx: hwcg tables in gpulist drm/msm/dpu: add SM8250 to hw catalog drm/msm/dpu: add SM8150 to hw catalog drm/msm/dpu: intf timing path for displayport drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3 drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845 drm/msm/dpu: move some sspp caps to dpu_caps drm/msm/dpu: update UBWC config for sm8150 and sm8250 drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250 drm/msm/a6xx: set ubwc config for A640 and A650 drm/msm/adreno: un-open-code some packets drm/msm: sync generated headers drm/msm/a6xx: add build_bw_table for A640/A650 drm/msm/a6xx: fix crashstate capture for A650 ... |
||
Linus Torvalds
|
e4a7b2dc35 |
LEDs changes for 5.9-rc1.
Okay, so... this one is interesting. RGB LEDs are very common, and we need to have some kind of support for them. Multicolor is for arbitrary set of LEDs in one package, RGB is for LEDs that can produce full range of colors. We do not have real multicolor LED that is not RGB in the pipeline, so that one is disabled for now. You can expect this saga to continue with next pull requests. -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQRPfPO7r0eAhk010v0w5/Bqldv68gUCXyskqQAKCRAw5/Bqldv6 8ge0AJ9JRTa/0Xkl7JuKUpC93jAnvjpK+ACgsDijb77H5zmtwC8xa0kXiDsbh3E= =aSJX -----END PGP SIGNATURE----- Merge tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "Okay, so... this one is interesting. RGB LEDs are very common, and we need to have some kind of support for them. Multicolor is for arbitrary set of LEDs in one package, RGB is for LEDs that can produce full range of colors. We do not have real multicolor LED that is not RGB in the pipeline, so that one is disabled for now. You can expect this saga to continue with next pull requests" * tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (37 commits) MAINTAINERS: Remove myself as LED subsystem maintainer leds: disallow /sys/class/leds/*:multi:* for now leds: add RGB color option, as that is different from multicolor. Make LEDS_LP55XX_COMMON depend on I2C to fix build errors: Documentation: ABI: leds-turris-omnia: document sysfs attribute leds: initial support for Turris Omnia LEDs dt-bindings: leds: add cznic,turris-omnia-leds binding leds: pattern trigger -- check pattern for validity leds: Replace HTTP links with HTTPS ones leds: trigger: add support for LED-private device triggers leds: lp5521: Add multicolor framework multicolor brightness support leds: lp5523: Update the lp5523 code to add multicolor brightness function leds: lp55xx: Add multicolor framework support to lp55xx leds: lp55xx: Convert LED class registration to devm_* dt-bindings: leds: Convert leds-lp55xx to yaml leds: multicolor: Introduce a multicolor class definition leds: Add multicolor ID to the color ID list dt: bindings: Add multicolor class dt bindings documention leds: lp5523: Fix various formatting issues in the code leds: lp55xx: Fix file permissions to use DEVICE_ATTR macros ... |
||
Dean Nelson
|
c1055b76ad |
net: thunderx: initialize VF's mailbox mutex before first usage
A VF's mailbox mutex is not getting initialized by nicvf_probe() until after
it is first used. And such usage is resulting in...
[ 28.270927] ------------[ cut here ]------------
[ 28.270934] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 28.270980] WARNING: CPU: 9 PID: 675 at kernel/locking/mutex.c:938 __mutex_lock+0xdac/0x12f0
[ 28.270985] Modules linked in: ast(+) nicvf(+) i2c_algo_bit drm_vram_helper drm_ttm_helper ttm nicpf(+) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ixgbe(+) sg thunder_bgx mdio i2c_thunderx mdio_thunder thunder_xcv mdio_cavium dm_mirror dm_region_hash dm_log dm_mod
[ 28.271064] CPU: 9 PID: 675 Comm: systemd-udevd Not tainted 4.18.0+ #1
[ 28.271070] Hardware name: GIGABYTE R120-T34-00/MT30-GS2-00, BIOS F02 08/06/2019
[ 28.271078] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 28.271086] pc : __mutex_lock+0xdac/0x12f0
[ 28.271092] lr : __mutex_lock+0xdac/0x12f0
[ 28.271097] sp : ffff800d42146fb0
[ 28.271103] x29: ffff800d42146fb0 x28: 0000000000000000
[ 28.271113] x27: ffff800d24361180 x26: dfff200000000000
[ 28.271122] x25: 0000000000000000 x24: 0000000000000002
[ 28.271132] x23: ffff20001597cc80 x22: ffff2000139e9848
[ 28.271141] x21: 0000000000000000 x20: 1ffff001a8428e0c
[ 28.271151] x19: ffff200015d5d000 x18: 1ffff001ae0f2184
[ 28.271160] x17: 0000000000000000 x16: 0000000000000000
[ 28.271170] x15: ffff800d70790c38 x14: ffff20001597c000
[ 28.271179] x13: ffff20001597cc80 x12: ffff040002b2f779
[ 28.271189] x11: 1fffe40002b2f778 x10: ffff040002b2f778
[ 28.271199] x9 : 0000000000000000 x8 : 00000000f1f1f1f1
[ 28.271208] x7 : 00000000f2f2f2f2 x6 : 0000000000000000
[ 28.271217] x5 : 1ffff001ae0f2186 x4 : 1fffe400027eb03c
[ 28.271227] x3 : dfff200000000000 x2 : ffff1001a8428dbe
[ 28.271237] x1 : c87fdfac7ea11d00 x0 : 0000000000000000
[ 28.271246] Call trace:
[ 28.271254] __mutex_lock+0xdac/0x12f0
[ 28.271261] mutex_lock_nested+0x3c/0x50
[ 28.271297] nicvf_send_msg_to_pf+0x40/0x3a0 [nicvf]
[ 28.271316] nicvf_register_misc_interrupt+0x20c/0x328 [nicvf]
[ 28.271334] nicvf_probe+0x508/0xda0 [nicvf]
[ 28.271344] local_pci_probe+0xc4/0x180
[ 28.271352] pci_device_probe+0x3ec/0x528
[ 28.271363] driver_probe_device+0x21c/0xb98
[ 28.271371] device_driver_attach+0xe8/0x120
[ 28.271379] __driver_attach+0xe0/0x2a0
[ 28.271386] bus_for_each_dev+0x118/0x190
[ 28.271394] driver_attach+0x48/0x60
[ 28.271401] bus_add_driver+0x328/0x558
[ 28.271409] driver_register+0x148/0x398
[ 28.271416] __pci_register_driver+0x14c/0x1b0
[ 28.271437] nicvf_init_module+0x54/0x10000 [nicvf]
[ 28.271447] do_one_initcall+0x18c/0xc18
[ 28.271457] do_init_module+0x18c/0x618
[ 28.271464] load_module+0x2bc0/0x4088
[ 28.271472] __se_sys_finit_module+0x110/0x188
[ 28.271479] __arm64_sys_finit_module+0x70/0xa0
[ 28.271490] el0_svc_handler+0x15c/0x380
[ 28.271496] el0_svc+0x8/0xc
[ 28.271502] irq event stamp: 52649
[ 28.271513] hardirqs last enabled at (52649): [<ffff200011b4d790>] _raw_spin_unlock_irqrestore+0xc0/0xd8
[ 28.271522] hardirqs last disabled at (52648): [<ffff200011b4d3c4>] _raw_spin_lock_irqsave+0x3c/0xf0
[ 28.271530] softirqs last enabled at (52330): [<ffff200010082af4>] __do_softirq+0xacc/0x117c
[ 28.271540] softirqs last disabled at (52313): [<ffff20001019b354>] irq_exit+0x3cc/0x500
[ 28.271545] ---[ end trace a9b90324c8a0d4ee ]---
This problem is resolved by moving the call to mutex_init() up earlier
in nicvf_probe().
Fixes:
|
||
David S. Miller
|
0063fc3db4 |
Merge branch 'misc-bug-fixes-for-the-hso-driver'
Oliver Neukum says: ==================== misc bug fixes for the hso driver 1. Code reuse led to an unregistration of a net driver that has not been registered 2. The kernel complains generically if kmalloc with GFP_KERNEL fails 3. A race that can lead to an URB that is in use being reused or a use after free ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Oliver Neukum
|
abaf00ff04 |
usb: hso: remove bogus check for EINPROGRESS
This check an inherent race. It opens a race where an error code has already been set or cleared yet the URB has not been given back. We cannot do such an optimization and must unlink unconditionally. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Oliver Neukum
|
11c5f6d2f2 |
usb: hso: no complaint about kmalloc failure
If this fails, kmalloc() will print a report including a stack trace. There is no need for a separate complaint. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Oliver Neukum
|
5fcfb6d0bf |
hso: fix bailout in error case of probe
The driver tries to reuse code for disconnect in case of a failed probe. If resources need to be freed after an error in probe, the netdev must not be freed because it has never been registered. Fix it by telling the helper which path we are in. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Mike Rapoport
|
6c86a3029c |
MIPS: SGI-IP27: always enable NUMA in Kconfig
When a configuration has NUMA disabled and SGI_IP27 enabled, the build
fails:
CC kernel/bounds.s
CC arch/mips/kernel/asm-offsets.s
In file included from arch/mips/include/asm/topology.h:11,
from include/linux/topology.h:36,
from include/linux/gfp.h:9,
from include/linux/slab.h:15,
from include/linux/crypto.h:19,
from include/crypto/hash.h:11,
from include/linux/uio.h:10,
from include/linux/socket.h:8,
from include/linux/compat.h:15,
from arch/mips/kernel/asm-offsets.c:12:
include/linux/topology.h: In function 'numa_node_id':
arch/mips/include/asm/mach-ip27/topology.h:16:27: error: implicit declaration of function 'cputonasid'; did you mean 'cpu_vpe_id'? [-Werror=implicit-function-declaration]
#define cpu_to_node(cpu) (cputonasid(cpu))
^~~~~~~~~~
include/linux/topology.h:119:9: note: in expansion of macro 'cpu_to_node'
return cpu_to_node(raw_smp_processor_id());
^~~~~~~~~~~
include/linux/topology.h: In function 'cpu_cpu_mask':
arch/mips/include/asm/mach-ip27/topology.h:19:7: error: implicit declaration of function 'hub_data' [-Werror=implicit-function-declaration]
&hub_data(node)->h_cpus)
^~~~~~~~
include/linux/topology.h:210:9: note: in expansion of macro 'cpumask_of_node'
return cpumask_of_node(cpu_to_node(cpu));
^~~~~~~~~~~~~~~
arch/mips/include/asm/mach-ip27/topology.h:19:21: error: invalid type argument of '->' (have 'int')
&hub_data(node)->h_cpus)
^~
include/linux/topology.h:210:9: note: in expansion of macro 'cpumask_of_node'
return cpumask_of_node(cpu_to_node(cpu));
^~~~~~~~~~~~~~~
Before switch from discontigmem to sparsemem, there always was
CONFIG_NEED_MULTIPLE_NODES=y because it was selected by DISCONTIGMEM.
Without DISCONTIGMEM it is possible to have SPARSEMEM without NUMA for
SGI_IP27 and as many things there rely on custom node definition, the
build breaks.
As Thomas noted "... there are right now too many places in IP27 code,
which assumes NUMA enabled", the simplest solution would be to always
enable NUMA for SGI-IP27 builds.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
|
||
Jacek Anaszewski
|
bba37471de |
MAINTAINERS: Remove myself as LED subsystem maintainer
It don't have enough time for reviewing patches and thus don't want to be listed as regular LED maintainer. Nonetheless I may still give a review from time to time. Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> |
||
Linus Torvalds
|
fffe3ae0ee |
hmm related patches for 5.9
This series adds reporting of the page table order from hmm_range_fault() and some optimization of migrate_vma(): - Report the size of the page table mapping out of hmm_range_fault(). This makes it easier to establish a large/huge/etc mapping in the device's page table. - Allow devices to ignore the invalidations during migration in cases where the migration is not going to change pages. For instance migrating pages to a device does not require the device to invalidate pages already in the device. - Update nouveau and hmm_tests to use the above -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl8oocYACgkQOG33FX4g mxqd3Q/+OClUADmrI+EGJAPI7VD3EYfyZdnMCcp39AYNfySQPN9+fCMF5hVD5U7x KZVflR/zKUIZJVvdD8yAdrynZ1sHBG/HEzDyoaKcGzfCKq5LEAEnP5FG3xsiDjkO QX7w6qIGDz59gaeanQKNzqaR3DMpBwO/0D5/80DWXv+WgmxsAphanJYlo4eWyq4D EGq8EndCxairkTLpPlDHvFottL5kAKDXEinSAwWGQeZJkRY93vj+HZAQaeltmB1K SDdZr7lsEg2RhtRjzT7CkA2bkCERKL3xEc4VWaCAZw+qm8aeswADVOSo5E5F7DMI NUsB/p4GZ2CvIog/y3g/aSGluevdYJHTH8ip1BnNr2qCcXSEqHKsmyKpVNZztSUl uljyT17ZzTsdR4xj50tM27fzgDaavWrwFZTsJxUifuvAO9rHvGDVpaN8ZIU9iZei PTsGQvfoHDmWBWKX1dkIUGq+UoGwEAYRGk+XU0OYZCK97xmjRnGVoH0FTOk4DNQs +A0250oTOrvdSGiv0fNT5qpWpFsQ/84h8Lz6ubAD3okVo1bk9cFMe2argQl+E2qI TGM9ZHS8rphJNWwiPm8xrgf9eQ9bNp3ilCsIzBBpqZq8elwaL6a3ySieDPE734Ar FZEeEYTvj5Z/gXtyo/gxVKhltCc4U8kPqye9uexTInz4zBUUZOM= =omAU -----END PGP SIGNATURE----- Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull hmm updates from Jason Gunthorpe: "Ralph has been working on nouveau's use of hmm_range_fault() and migrate_vma() which resulted in this small series. It adds reporting of the page table order from hmm_range_fault() and some optimization of migrate_vma(): - Report the size of the page table mapping out of hmm_range_fault(). This makes it easier to establish a large/huge/etc mapping in the device's page table. - Allow devices to ignore the invalidations during migration in cases where the migration is not going to change pages. For instance migrating pages to a device does not require the device to invalidate pages already in the device. - Update nouveau and hmm_tests to use the above" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: mm/hmm/test: use the new migration invalidation nouveau/svm: use the new migration invalidation mm/notifier: add migration invalidation type mm/migrate: add a flags parameter to migrate_vma nouveau: fix storing invalid ptes nouveau/hmm: support mapping large sysmem pages nouveau: fix mapping 2MB sysmem pages nouveau/hmm: fault one page at a time mm/hmm: add tests for hmm_pfn_to_map_order() mm/hmm: provide the page mapping order in hmm_range_fault() |
||
Linus Torvalds
|
8f7be62915 |
MMC core:
- Add a new host cap bit and a corresponding DT property, to support power cycling of the card by FW at system suspend/resume. - Fix clock rate setting for SDIO in SDR12/SDR25 speed-mode - Fix switch to 1/4-bit mode at system suspend/resume for SD-combo cards - Convert the mmc-pwrseq DT bindings to the json-schema - Always allow the card detect uevent to be consumed by userspace MMC host: - Convert a few DT bindings to the json-schema - mtk-sd: Add support for command queue through cqhci - mtk-sd: Add support for the MT6779 variant - renesas_sdhi_internal_dmac: Fix dma unmapping in the error path - sdhci_am654: Add support for the AM65x PG2.0 variant - sdhci_am654: Extend support for phys/clocks - sdhci-cadence: Drop incorrect HW tuning for SD mode - sdhci-msm: Add support for interconnect bandwidth scaling - sdhci-msm: Enable internal voltage control - sdhci-msm: Enable low power state for pinctrls - sdhci-of-at91: Ludovic Desroches handovers maintenance to Eugen Hristev - sdhci-pci-gli: Improve clock handling for GL975x - sdhci-pci-o2micro: Add HW tuning for SDR104 mode - sdhci-pci-o2micro: Fix support for O2 host controller Seabird1 -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAl8qX5kXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCkaURAAwjmHPGx+bc8By0y6FRDrm67S e1WFLTaFf6NuyjhxJRndmEvNUQIbvJVQ5NNBvzsmXzFC5BWQnAcmf3OATvTbTJ5B KSMf6ZqaZXDDlrSxve6l10e0/7cI+jb9LsEkPkV2Xk7Cr5Gx+/7+2UPRqtSr4WPE eMKGBOZYw3R2TaVB3qmf3Icj9IEhMJiou1NxTmR0370+SD8dtV2SwV42lMVuM9N5 Re4u3BhLaej970mKJxSZUAmtKKPzVkvHAUe2lzPwrPS4a7pzj3naWLyJsdhiclIq pwzyUYysRzIX4t/AbkyFfeBvR+E4mxmQciRilnJy4rZY7csSdYsvg0jZS30UANMn 21REkHlpE/7gfVx+pX8Q+Q/4XirJuL1jJJglWEoWqrx+sdpMnIa7NXowLmknG5vM fz2wS9cIfI82XK/ISzTRe6WWK3B/JftDLfNTQCDu2StE4Dr32Qjmt1ijtiJiSBTx +fCfKHWhmVaww5oFZ6RBCP1vdc4GW9SQvvj10O1QiRDiFXYASGxq7wrf6GLNwECn h7z5imBgSQrAdqyxAmX7E7R1g7Xv/jnqEAxxqtv3oA82RbmARe3lIQhnjemmtzU6 yD2qboc5cHdp7D2AB4TaN5qqFbrqMxLyRMknPnukAf2MwouGkiuBGG3mxRpy1Bpo MZBNyieX2erDT4hZDI8= =AwwR -----END PGP SIGNATURE----- Merge tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Add a new host cap bit and a corresponding DT property, to support power cycling of the card by FW at system suspend/resume. - Fix clock rate setting for SDIO in SDR12/SDR25 speed-mode - Fix switch to 1/4-bit mode at system suspend/resume for SD-combo cards - Convert the mmc-pwrseq DT bindings to the json-schema - Always allow the card detect uevent to be consumed by userspace MMC host controllers: - Convert a few DT bindings to the json-schema - mtk-sd: - Add support for command queue through cqhci - Add support for the MT6779 variant - renesas_sdhi_internal_dmac: - Fix dma unmapping in the error path - sdhci_am654: - Add support for the AM65x PG2.0 variant - Extend support for phys/clocks - sdhci-cadence: - Drop incorrect HW tuning for SD mode - sdhci-msm: - Add support for interconnect bandwidth scaling - Enable internal voltage control - Enable low power state for pinctrls - sdhci-of-at91: - Ludovic Desroches handovers maintenance to Eugen Hristev - sdhci-pci-gli: - Improve clock handling for GL975x - sdhci-pci-o2micro: - Add HW tuning for SDR104 mode - Fix support for O2 host controller Seabird1" * tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (66 commits) mmc: mediatek: make function msdc_cqe_disable() static MAINTAINERS: mmc: sdhci-of-at91: handover maintenance to Eugen Hristev dt-bindings: mmc: mediatek: Add document for mt6779 mmc: mediatek: command queue support mmc: mediatek: refine msdc timeout api mmc: mediatek: add MT6779 MMC driver support mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode mmc: sdhci-pci-o2micro: Bug fix for O2 host controller Seabird1 mmc: via-sdmmc: use generic power management memstick: jmb38x_ms: use generic power management mmc: sdhci-cadence: do not use hardware tuning for SD mode mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL975x mmc: cqhci: Fix a print format for the task descriptor mmc: sdhci-of-arasan: fix timings allocation code mmc: sdhci: Fix a potential uninitialized variable dt-bindings: mmc: renesas,sdhi: convert to YAML dt-bindings: mmc: convert arasan sdhci bindings to yaml mmc: sdhci: Fix potential null pointer access while accessing vqmmc mmc: core: Add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND dt-bindings: mmc: Add full-pwr-cycle-in-suspend property ... |
||
Linus Torvalds
|
9aebd3254c |
hwmon updates for v5.9
Highlights: - New driver for Sparx5 SoC temperature sensot - New driver for Corsair Commander Pro - MAX20710 support added to max20730 driver Enhancements: - max6697: Allow max6581 to create tempX_offset attributes - gsc (Gateworks System Controller): add 16bit pre-scaled voltage mode - adm1275: Enable adm1278 ADM1278_TEMP1_EN - dell-smm: Add Latitude 5480 to fan control whitelist Fixes: - adc128d818: Fix advanced configuration register init - pmbus/core: Use s64 instead of long for calculations to fix overflow issues with 32-bit architectures Plus various cleanups in several drivers. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAl8p1d8ACgkQyx8mb86f mYGECw//RIhcVCvmSgnhRnAhN0EOJrl/QzFkukdl5MGnJIWQyW/od/Hjjg0A31VS GdrUGilP0vDwzy7QD9N1CgGaYM42yP0OlhlfcvRoYXGJsPhCcWMGT2EnNsbuCpYj O1CR/fjgYSrNmU1TvUKVLTnaCikckP3NGlbJVXViPd4LyP8kgSp2ZTqNGOOw5ByT tAryzG2TDg/0V1aB/jniTPsZtp3Ezw4I0+DtGfXNKLw6LBZaMPVoLuDqLAv3KgUa m2sZ1CG1gzvflLznDtb03g9xakwdq1Nj0xx0+t3tJtztte2FG3AsXlA3feAXZAL8 cH83xXUKFhb40n90RhGt6DWwKbvygtTuCe+6EaixYhesHvU8sC36FMBxCp7dSPUb 0ppJx0cmQB/3EMOsSzl7+dhwos/9yGkkGKJi1bPv0zYHq4BxtTYcV2vkx7q+DKHA 86e/IQNdoLqPOiGD+oFHAZzyJy7GEcVT054I7wuGrkHXlsm4aJIxOYOxFgRmcrjl /RGGdPypMWxNE3NwoNOOHFBiKVi8Bh26JpncLaNmY96fHEhsUtfNICFxIVFgaZCt sOa+pZjPbQtR3UAMnB3ZZfvzBELzAgY/FMm6fdVfrpIukK3dss3CIlNbZVm4P+0a CmOdA4a8EMQPDOFcFxeyv+0/PhIdf/tAZBtRDkT7E1oeaqfb18Q= =nMNN -----END PGP SIGNATURE----- Merge tag 'hwmon-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "Highlights: - New driver for Sparx5 SoC temperature sensot - New driver for Corsair Commander Pro - MAX20710 support added to max20730 driver Enhancements: - max6697: Allow max6581 to create tempX_offset attributes - gsc (Gateworks System Controller): add 16bit pre-scaled voltage mode - adm1275: Enable adm1278 ADM1278_TEMP1_EN - dell-smm: Add Latitude 5480 to fan control whitelist Fixes: - adc128d818: Fix advanced configuration register init - pmbus/core: Use s64 instead of long for calculations to fix overflow issues with 32-bit architectures Plus various cleanups in several drivers" * tag 'hwmon-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (32 commits) hwmon: (adc128d818) Fix advanced configuration register init hwmon: (axi-fan-control) remove duplicate macros hwmon: (i5k_amb, vt8231) Drop uses of pci_read_config_*() return value hwmon: (sparx5) Make symbol 's5_temp_match' static hwmon: (corsair-cpro) add reading pwm values hwmon: sparx5: Add Sparx5 SoC temperature driver dt-bindings: hwmon: Add Sparx5 temperature sensor hwmon: (tmp401) Replace HTTP links with HTTPS ones hwmon: (lm95234) Replace HTTP links with HTTPS ones hwmon: (lm90) Replace HTTP links with HTTPS ones hwmon: (k8temp) Replace HTTP links with HTTPS ones hwmon: (jc42) Replace HTTP links with HTTPS ones hwmon: (ina2xx) Replace HTTP links with HTTPS ones hwmon: (ina209) Replace HTTP links with HTTPS ones hwmon: Replace HTTP links with HTTPS ones docs: hwmon: Replace HTTP links with HTTPS ones hwmon: (adm1025) Replace HTTP links with HTTPS ones hwmon: add Corsair Commander Pro driver hwmon: (max6697) Allow max6581 to create tempX_offset hwmon: (tmmp513) Replace HTTP links with HTTPS links ... |
||
Linus Torvalds
|
441977979a |
Devicetree updates for v5.9:
- Improve device links cycle detection and breaking. Add more bindings for device link dependencies. - Refactor parsing 'no-map' in __reserved_mem_alloc_size() - Improve DT unittest 'ranges' and 'dma-ranges' test case to check differing cell sizes - Various http to https link conversions - Add a schema check to prevent 'syscon' from being used by itself without a more specific compatible - A bunch more DT binding conversions to schema -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl8pjPoQHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhw33aD/48a9wymbzf0r6mpXJyzO5zspcvcDgT7/si Eeucbp7diRX3Ei0YkfvQH3s7bEA7JM2DlPDmXBieWZqpXS9tvbX9P6VxId6bfTiI oSg/e4NNqxtHpaf4Nn6EwFFILbbi10LKvwodYDy9agePApc+wJWLI2WwlvdEsSsF vv9nnF23NdJnSjsEXwiAB+ouX8EilqB80+s9W/TUaA/RS+xEOinAkXab4qjCvTlH yUHpqe/mXDd6c4gb0EsIuAPkG7GE9/pc39iwxQ7IWz/qnSSfExjEac8j0QU4zD8u zD2EkIQMEZR7IDsQOOkEQ4gbbzl3SjrMlQSZp/VWcjcn9uVrE5VPddH/NMdb8L7m m5pgH1TFheYBPaqRIVuzrRcfW7KVjjeUuoG7xfDQy+ELWmHAMlb3uyH2CNDqmgYM ESEQgSH5w4cabP5qeXvXyZci3Zbajw2Dd555gWNC2ot6yPToJEXkesnrcpuwZZV5 Wyn5IOAuf7rri4TEpl5CsR6iJnAJsNnN+23gMaemxz2qDgBCBhY7CSoRVeP7Xxpw ymCIna6p7i/ufiP4QauTTafw03AMZz6Le8iujIaN3dmq8SbQc7BYeFNwFNjs+lyO B1gvJOt3xTXTdfqqQWpEQMg659IGguOu6MGecxN+nteTBYqQ3Ol77zNn+a0n4BA7 +rGqybfiFg== =6f3o -----END PGP SIGNATURE----- Merge tag 'devicetree-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - Improve device links cycle detection and breaking. Add more bindings for device link dependencies. - Refactor parsing 'no-map' in __reserved_mem_alloc_size() - Improve DT unittest 'ranges' and 'dma-ranges' test case to check differing cell sizes - Various http to https link conversions - Add a schema check to prevent 'syscon' from being used by itself without a more specific compatible - A bunch more DT binding conversions to schema * tag 'devicetree-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) of: reserved-memory: remove duplicated call to of_get_flat_dt_prop() for no-map node of: unittest: Use bigger address cells to catch parser regressions dt-bindings: memory-controllers: Convert mmdc to json-schema dt-bindings: mtd: Convert imx nand to json-schema dt-bindings: mtd: Convert gpmi nand to json-schema dt-bindings: iio: io-channel-mux: Fix compatible string in example code of: property: Add device link support for pinctrl-0 through pinctrl-8 of: property: Add device link support for multiple DT bindings dt-bindings: phy: ti: phy-gmii-sel: convert bindings to json-schema dt-bindings: mux: mux.h: drop a duplicated word dt-bindings: misc: Convert olpc,xo1.75-ec to json-schema dt-bindings: aspeed-lpc: Replace HTTP links with HTTPS ones dt-bindings: drm/bridge: Replace HTTP links with HTTPS ones drm/tilcdc: Replace HTTP links with HTTPS ones dt-bindings: iommu: renesas,ipmmu-vmsa: Add r8a774e1 support dt-bindings: fpga: Replace HTTP links with HTTPS ones dt-bindings: virtio: Replace HTTP links with HTTPS ones dt-bindings: media: imx274: Add optional input clock and supplies dt-bindings: i2c-gpio: Use 'deprecated' keyword on deprecated properties dt-bindings: interrupt-controller: Fix typos in loongson,liointc.yaml ... |
||
Linus Torvalds
|
1d8ce0e093 |
This is the bulk of GPIO changes for the v5.9 kernel cycle:
Core changes: - Introduce the for_each_requested_gpio() macro to help in dependent code all over the place. Also patch a few locations to use it while we are at it. - Split out the sysfs code into its own file. - Split out the character device code into its own file, then make a set of refactorings and improvements to this code. We are setting the stage to revamp the userspace API a bit in the next cycle. - Fix a whole slew of kerneldoc that was wrong or missing. New drivers: - The PCA953x driver now supports the PCAL9535. Driver improvements: - A host of incremental modernizations and improvements to the PCA953x driver. - Incremental improvements to the Xilinx Zynq driver. - Some improvements to the GPIO aggregator driver. - I ran all over the place switching all threaded and other drivers requesting their own IRQ while using the core GPIO IRQ helpers to pass the GPIO irq chip as a template instead of calling the explicit set-up functions. Next merge window we may retire the old code altogether. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl8p2cEACgkQQRCzN7AZ XXMjBBAAs4YwEALYTCvpzbXdYGAgMGIEAD84dPBZTAYj3P/iGuXPk/+wdt4wLHTD dQl0/MG6JXf+mCClgsHhC+ILPUS6YM/v/it4gnV4j6o/ugYiNPADYl4pieaq/SVb jNrSxs0tzZYTtlq6xSmRMCpA8SgP3ASWNa5dp5mDkuo3xaEJvM3cpsww7Q5GG3Fb HQD9+XgBGQx7H+6JMoNHR8/E9A5y4pwIvTlfqzTcq3UupTqlvklekgu0fTiA6D7t z/ydQpYtqevuirir7J7oMiIhTSPgTkOcUwNO6hCcwpO/a0q7jwy1DvGIyJDM2yIj UYby03SCLknFGxLwKAcavC3mnLIIor61385e5+lXBH0OS7EO8OpBoi9vAxqalcZ8 ZRrOyYrT3et40rD+ByFFwbUsrD9D4c0Ul+Ocr8upKdnGlRW/u8YahIwn82qnKjF0 ANJanZu76c8ZU8AJQyM/HD7hrcJ0MJXhECXb/JJx4O52ebi4fmOdtS/Kx2urH4KR hX3tspQM/tU89a4jW7NIzzfZKlnPI2rI3NxYgziQVgVnt+iVrkyBiYSoWhK+DEyu JJl5zXHvgb1UmejqN2Qtkq9V+3R2VEYg7WUyr6b48q4acSVI1q+NfGE7+GBT/+d4 Kt1eGz8QtEnxspDhVsQNY4WSP8QpwhmWWM2ujsO6a81vyjB4vSg= =OSvz -----END PGP SIGNATURE----- Merge tag 'gpio-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.9 kernel cycle. There is nothing too exciting in it, but a new macro that fixes a build failure on a minor ARM32 platform that appeared yesterday is part of it so we better merge it. Core changes: - Introduce the for_each_requested_gpio() macro to help in dependent code all over the place. Also patch a few locations to use it while we are at it. - Split out the sysfs code into its own file. - Split out the character device code into its own file, then make a set of refactorings and improvements to this code. We are setting the stage to revamp the userspace API a bit in the next cycle. - Fix a whole slew of kerneldoc that was wrong or missing. New drivers: - The PCA953x driver now supports the PCAL9535. Driver improvements: - A host of incremental modernizations and improvements to the PCA953x driver. - Incremental improvements to the Xilinx Zynq driver. - Some improvements to the GPIO aggregator driver. - I ran all over the place switching all threaded and other drivers requesting their own IRQ while using the core GPIO IRQ helpers to pass the GPIO irq chip as a template instead of calling the explicit set-up functions. Next merge window we may retire the old code altogether" * tag 'gpio-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (97 commits) gpio: wcove: Request IRQ after all initialisation done gpio: crystalcove: Free IRQ on error path gpio: pca953x: Request IRQ after all initialisation done gpio: don't use same lockdep class for all devm_gpiochip_add_data users gpio: max732x: Use irqchip template gpio: stmpe: Move chip registration gpio: rcar: Use irqchip template gpio: regmap: fix type clash gpio: Correct kernel-doc inconsistency gpio: pci-idio-16: Use irqchip template gpio: pcie-idio-24: Use irqchip template gpio: 104-idio-16: Use irqchip template gpio: 104-idi-48: Use irqchip template gpio: 104-dio-48e: Use irqchip template gpio: ws16c48: Use irqchip template gpio: omap: improve coding style for pin config flags gpio: dln2: Use irqchip template gpio: sch: Add a blank line between declaration and code gpio: sch: changed every 'unsigned' to 'unsigned int' gpio: ich: changed every 'unsigned' to 'unsigned int' ... |
||
Linus Torvalds
|
585524081e |
random: random.h should include archrandom.h, not the other way around
This is hopefully the final piece of the crazy puzzle with random.h dependencies. And by "hopefully" I obviously mean "Linus is a hopeless optimist". Reported-and-tested-by: Daniel Díaz <daniel.diaz@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Stefano Brivio
|
8ed54f167a |
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
On architectures defining _HAVE_ARCH_IPV6_CSUM, we get
csum_ipv6_magic() defined by means of arch checksum.h headers. On
other architectures, we actually need to include net/ip6_checksum.h
to be able to use it.
Without this include, building with defconfig breaks at least for
s390.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes:
|
||
Willem de Bruijn
|
16f6458f24 |
selftests/net: relax cpu affinity requirement in msg_zerocopy test
The msg_zerocopy test pins the sender and receiver threads to separate
cores to reduce variance between runs.
But it hardcodes the cores and skips core 0, so it fails on machines
with the selected cores offline, or simply fewer cores.
The test mainly gives code coverage in automated runs. The throughput
of zerocopy ('-z') and non-zerocopy runs is logged for manual
inspection.
Continue even when sched_setaffinity fails. Just log to warn anyone
interpreting the data.
Fixes:
|
||
Paolo Abeni
|
adf7341064 |
mptcp: be careful on subflow creation
Nicolas reported the following oops:
[ 1521.392541] BUG: kernel NULL pointer dereference, address: 00000000000000c0
[ 1521.394189] #PF: supervisor read access in kernel mode
[ 1521.395376] #PF: error_code(0x0000) - not-present page
[ 1521.396607] PGD 0 P4D 0
[ 1521.397156] Oops: 0000 [#1] SMP PTI
[ 1521.398020] CPU: 0 PID: 22986 Comm: kworker/0:2 Not tainted 5.8.0-rc4+ #109
[ 1521.399618] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1521.401728] Workqueue: events mptcp_worker
[ 1521.402651] RIP: 0010:mptcp_subflow_create_socket+0xf1/0x1c0
[ 1521.403954] Code: 24 08 89 44 24 04 48 8b 7a 18 e8 2a 48 d4 ff 8b 44 24 04 85 c0 75 7a 48 8b 8b 78 02 00 00 48 8b 54 24 08 48 8d bb 80 00 00 00 <48> 8b 89 c0 00 00 00 48 89 8a c0 00 00 00 48 8b 8b 78 02 00 00 8b
[ 1521.408201] RSP: 0000:ffffabc4002d3c60 EFLAGS: 00010246
[ 1521.409433] RAX: 0000000000000000 RBX: ffffa0b9ad8c9a00 RCX: 0000000000000000
[ 1521.411096] RDX: ffffa0b9ae78a300 RSI: 00000000fffffe01 RDI: ffffa0b9ad8c9a80
[ 1521.412734] RBP: ffffa0b9adff2e80 R08: ffffa0b9af02d640 R09: ffffa0b9ad923a00
[ 1521.414333] R10: ffffabc4007139f8 R11: fefefefefefefeff R12: ffffabc4002d3cb0
[ 1521.415918] R13: ffffa0b9ad91fa58 R14: ffffa0b9ad8c9f9c R15: 0000000000000000
[ 1521.417592] FS: 0000000000000000(0000) GS:ffffa0b9af000000(0000) knlGS:0000000000000000
[ 1521.419490] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1521.420839] CR2: 00000000000000c0 CR3: 000000002951e006 CR4: 0000000000160ef0
[ 1521.422511] Call Trace:
[ 1521.423103] __mptcp_subflow_connect+0x94/0x1f0
[ 1521.425376] mptcp_pm_create_subflow_or_signal_addr+0x200/0x2a0
[ 1521.426736] mptcp_worker+0x31b/0x390
[ 1521.431324] process_one_work+0x1fc/0x3f0
[ 1521.432268] worker_thread+0x2d/0x3b0
[ 1521.434197] kthread+0x117/0x130
[ 1521.435783] ret_from_fork+0x22/0x30
on some unconventional configuration.
The MPTCP protocol is trying to create a subflow for an
unaccepted server socket. That is allowed by the RFC, even
if subflow creation will likely fail.
Unaccepted sockets have still a NULL sk_socket field,
avoid the issue by failing earlier.
Reported-and-tested-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Fixes:
|
||
David S. Miller
|
889579d00b |
Merge branch 'selftests-rtnetlink-Fix-for-false-negative-return-values'
Po-Hsu Lin says: ==================== selftests: rtnetlink: Fix for false-negative return values This patchset will address the false-negative return value issue caused by the following: 1. The return value "ret" in this script will be reset to 0 from the beginning of each sub-test in rtnetlink.sh, therefore this rtnetlink test will always pass if the last sub-test has passed. 2. The test result from two sub-tests in kci_test_encap() were not being processed, thus they will not affect the final test result of this test. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Po-Hsu Lin
|
72f70c159b |
selftests: rtnetlink: make kci_test_encap() return sub-test result
kci_test_encap() is actually composed by two different sub-tests, kci_test_encap_vxlan() and kci_test_encap_fou() Therefore we should check the test result of these two in kci_test_encap() to let the script be aware of the pass / fail status. Otherwise it will generate false-negative result like below: $ sudo ./test.sh PASS: policy routing PASS: route get PASS: preferred_lft addresses have expired PASS: promote_secondaries complete PASS: tc htb hierarchy PASS: gre tunnel endpoint PASS: gretap PASS: ip6gretap PASS: erspan PASS: ip6erspan PASS: bridge setup PASS: ipv6 addrlabel PASS: set ifalias 5b193daf-0a08-46d7-af2c-e7aadd422ded for test-dummy0 PASS: vrf PASS: vxlan FAIL: can't add fou port 7777, skipping test PASS: macsec PASS: bridge fdb get PASS: neigh get $ echo $? 0 Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Po-Hsu Lin
|
c2a4d27479 |
selftests: rtnetlink: correct the final return value for the test
The return value "ret" will be reset to 0 from the beginning of each sub-test in rtnetlink.sh, therefore this test will always pass if the last sub-test has passed: $ sudo ./rtnetlink.sh PASS: policy routing PASS: route get PASS: preferred_lft addresses have expired PASS: promote_secondaries complete PASS: tc htb hierarchy PASS: gre tunnel endpoint PASS: gretap PASS: ip6gretap PASS: erspan PASS: ip6erspan PASS: bridge setup PASS: ipv6 addrlabel PASS: set ifalias a39ee707-e36b-41d3-802f-63179ed4d580 for test-dummy0 PASS: vrf PASS: vxlan FAIL: can't add fou port 7777, skipping test PASS: macsec PASS: ipsec 3,7c3,7 < sa[0] spi=0x00000009 proto=0x32 salt=0x64636261 crypt=1 < sa[0] key=0x31323334 35363738 39303132 33343536 < sa[1] rx ipaddr=0x00000000 00000000 00000000 c0a87b03 < sa[1] spi=0x00000009 proto=0x32 salt=0x64636261 crypt=1 < sa[1] key=0x31323334 35363738 39303132 33343536 --- > sa[0] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1 > sa[0] key=0x34333231 38373635 32313039 36353433 > sa[1] rx ipaddr=0x00000000 00000000 00000000 037ba8c0 > sa[1] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1 > sa[1] key=0x34333231 38373635 32313039 36353433 FAIL: ipsec_offload incorrect driver data FAIL: ipsec_offload PASS: bridge fdb get PASS: neigh get $ echo $? 0 Make "ret" become a local variable for all sub-tests. Also, check the sub-test results in kci_test_rtnl() and return the final result for this test. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Vladimir Oltean
|
0b0e299720 |
net: dsa: sja1105: use detected device id instead of DT one on mismatch
Although we can detect the chip revision 100% at runtime, it is useful to specify it in the device tree compatible string too, because otherwise there would be no way to assess the correctness of device tree bindings statically, without booting a board (only some switch versions have internal RGMII delays and/or an SGMII port). But for testing the P/Q/R/S support, what I have is a reworked board with the SJA1105T replaced by a pin-compatible SJA1105Q, and I don't want to keep a separate device tree blob just for this one-off board. Since just the chip has been replaced, its RGMII delay setup is inherently the same (meaning: delays added by the PHY on the slave ports, and by PCB traces on the fixed-link CPU port). For this board, I'd rather have the driver shout at me, but go ahead and use what it found even if it doesn't match what it's been told is there. [ 2.970826] sja1105 spi0.1: Device tree specifies chip SJA1105T but found SJA1105Q, please fix it! [ 2.980010] sja1105 spi0.1: Probed switch chip: SJA1105Q [ 3.005082] sja1105 spi0.1: Enabled switch tagging Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
David S. Miller
|
273d405b4d |
Merge branch 'net-fix-a-mcast-issue-for-tipc-udp-media'
Xin Long says: ==================== net: fix a mcast issue for tipc udp media Patch 1 is to add a function to get the dev by source address, which will be used by Patch 2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Xin Long
|
5a6f6f5791 |
tipc: set ub->ifindex for local ipv6 address
Without ub->ifindex set for ipv6 address in tipc_udp_enable(), ipv6_sock_mc_join() may make the wrong dev join the multicast address in enable_mcast(). This causes that tipc links would never be created. So fix it by getting the right netdev and setting ub->ifindex, as it does for ipv4 address. Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Xin Long
|
81f6cb3122 |
ipv6: add ipv6_dev_find()
This is to add an ip_dev_find like function for ipv6, used to find the dev by saddr. It will be used by TIPC protocol. So also export it. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Linus Torvalds
|
ecfd7940b8 |
USB/Thunderbolt patches for 5.9-rc1
Here is the large set of USB and Thunderbolt patches for 5.9-rc1. Nothing really magic/major in here, just lots of little changes and updates: - clean up language usages in USB core and some drivers - Thunderbolt driver updates and additions - USB Gadget driver updates - dwc3 driver updates (like always...) - build with "W=1" warning fixups - mtu3 driver updates - usb-serial driver updates and device ids - typec additions and updates for new hardware - xhci debug code updates for future platforms - cdns3 driver updates - lots of other minor driver updates and fixes and cleanups All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXymciA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylVVwCfU7JxgjFhAJTzC9K5efVqsrSHzxQAnijHrqUn pHgI9M1ZRVGwmv2RNWb3 =9/8I -----END PGP SIGNATURE----- Merge tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the large set of USB and Thunderbolt patches for 5.9-rc1. Nothing really magic/major in here, just lots of little changes and updates: - clean up language usages in USB core and some drivers - Thunderbolt driver updates and additions - USB Gadget driver updates - dwc3 driver updates (like always...) - build with "W=1" warning fixups - mtu3 driver updates - usb-serial driver updates and device ids - typec additions and updates for new hardware - xhci debug code updates for future platforms - cdns3 driver updates - lots of other minor driver updates and fixes and cleanups All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (330 commits) usb: common: usb-conn-gpio: Register charger usb: mtu3: simplify mtu3_req_complete() usb: mtu3: clear dual mode of u3port when disable device usb: mtu3: use MTU3_EP_WEDGE flag usb: mtu3: remove useless member @busy in mtu3_ep struct usb: mtu3: remove repeated error log usb: mtu3: add ->udc_set_speed() usb: mtu3: introduce a funtion to check maximum speed usb: mtu3: clear interrupts status when disable interrupts usb: mtu3: reinitialize CSR registers usb: mtu3: fix macro for maximum number of packets usb: mtu3: remove unnecessary pointer checks usb: xhci: Fix ASMedia ASM1142 DMA addressing usb: xhci: define IDs for various ASMedia host controllers usb: musb: convert to devm_platform_ioremap_resource_byname usb: gadget: tegra-xudc: convert to devm_platform_ioremap_resource_byname usb: gadget: r8a66597: convert to devm_platform_ioremap_resource_byname usb: dwc3: convert to devm_platform_ioremap_resource_byname usb: cdns3: convert to devm_platform_ioremap_resource_byname usb: phy: am335x: convert to devm_platform_ioremap_resource_byname ... |
||
Tonghao Zhang
|
5845589ed6 |
net: openvswitch: silence suspicious RCU usage warning
ovs_flow_tbl_destroy always is called from RCU callback
or error path. It is no need to check if rcu_read_lock
or lockdep_ovsl_is_held was held.
ovs_dp_cmd_fill_info always is called with ovs_mutex,
So use the rcu_dereference_ovsl instead of rcu_dereference
in ovs_flow_tbl_masks_cache_size.
Fixes:
|
||
Hangbin Liu
|
a0dced17ad |
Revert "vxlan: fix tos value before xmit"
This reverts commit |
||
Vladimir Oltean
|
c29f9aa350 |
ptp: only allow phase values lower than 1 period
The way we define the phase (the difference between the time of the signal's rising edge, and the closest integer multiple of the period), it doesn't make sense to have a phase value equal or larger than 1 period. So deny these settings coming from the user. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Linus Torvalds
|
dd27111e32 |
Driver core changes for 5.9-rc1
Here is the "big" set of changes to the driver core, and some drivers using the changes, for 5.9-rc1. "Biggest" thing in here is the device link exposure in sysfs, to help to tame the madness that is SoC device tree representations and driver interactions with it. Other stuff in here that is interesting is: - device probe log helper so that drivers can report problems in a unified way easier. - devres functions added - DEVICE_ATTR_ADMIN_* macro added to make it harder to write incorrect sysfs file permissions - documentation cleanups - ability for debugfs to be present in the kernel, yet not exposed to userspace. Needed for systems that want it enabled, but do not trust users, so they can still use some kernel functions that were otherwise disabled. - other minor fixes and cleanups The patches outside of drivers/base/ all have acks from the respective subsystem maintainers to go through this tree instead of theirs. All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylhOQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylGdACeKqxm8IIDZycj0QjLUlPiEwVIROgAnjpf5jAB mb4jMvgEGsB6/FwxypPG =RUss -----END PGP SIGNATURE----- Merge tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of changes to the driver core, and some drivers using the changes, for 5.9-rc1. "Biggest" thing in here is the device link exposure in sysfs, to help to tame the madness that is SoC device tree representations and driver interactions with it. Other stuff in here that is interesting is: - device probe log helper so that drivers can report problems in a unified way easier. - devres functions added - DEVICE_ATTR_ADMIN_* macro added to make it harder to write incorrect sysfs file permissions - documentation cleanups - ability for debugfs to be present in the kernel, yet not exposed to userspace. Needed for systems that want it enabled, but do not trust users, so they can still use some kernel functions that were otherwise disabled. - other minor fixes and cleanups The patches outside of drivers/base/ all have acks from the respective subsystem maintainers to go through this tree instead of theirs. All of these have been in linux-next with no reported issues" * tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits) drm/bridge: lvds-codec: simplify error handling drm/bridge/sii8620: fix resource acquisition error handling driver core: add deferring probe reason to devices_deferred property driver core: add device probe log helper driver core: Avoid binding drivers to dead devices Revert "test_firmware: Test platform fw loading on non-EFI systems" firmware_loader: EFI firmware loader must handle pre-allocated buffer selftest/firmware: Add selftest timeout in settings test_firmware: Test platform fw loading on non-EFI systems driver core: Change delimiter in devlink device's name to "--" debugfs: Add access restriction option tracefs: Remove unnecessary debug_fs checks. driver core: Fix probe_count imbalance in really_probe() kobject: remove unused KOBJ_MAX action driver core: Fix sleeping in invalid context during device link deletion driver core: Add waiting_for_supplier sysfs file for devices driver core: Add state_synced sysfs file for devices that support it driver core: Expose device link details in sysfs driver core: Drop mention of obsolete bus rwsem from kernel-doc debugfs: file: Remove unnecessary cast in kfree() ... |
||
Linus Torvalds
|
1785d11612 |
Char/Misc driver patches for 5.9-rc1
Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylccQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymofgCfZ1CxNWd0ZVM0YIn8cY9gO6ON7MsAnRq48hvn Vjf4rKM73GC11bVF4Gyy =Xq1R -----END PGP SIGNATURE----- Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits) habanalabs: remove unused but set variable 'ctx_asid' nvmem: qcom-spmi-sdam: Enable multiple devices dt-bindings: nvmem: SID: add binding for A100's SID controller nvmem: update Kconfig description nvmem: qfprom: Add fuse blowing support dt-bindings: nvmem: Add properties needed for blowing fuses dt-bindings: nvmem: qfprom: Convert to yaml nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances nvmem: core: add support to auto devid nvmem: core: Add nvmem_cell_read_u8() nvmem: core: Grammar fixes for help text nvmem: sc27xx: add sc2730 efuse support nvmem: Enforce nvmem stride in the sysfs interface MAINTAINERS: Add git tree for NVMEM FRAMEWORK nvmem: sprd: Fix return value of sprd_efuse_probe() drivers: android: Fix the SPDX comment style drivers: android: Fix a variable declaration coding style issue drivers: android: Remove braces for a single statement if-else block drivers: android: Remove the use of else after return drivers: android: Fix a variable declaration coding style issue ... |
||
Linus Torvalds
|
060a72a268 |
for-5.9/block-merge-20200804
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl8pjAEQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgphuHEAC5hNAi99HLktAQ7qZy4cBqnGNKCrguFszq Kxiecp3Nrb9EnAPNWYG+QMO0kD9z8quML85beBaJNxN1PlOk9pawqFAd4ziFncFI ruZwIMP+oH/0OmPUA2a4ymrqu+rpyFvfsDL2RKJ9dirAt9fuv9W0RZM5g7Oz83Xi cNdPRn0tOhK0DTPxL4M1/NR2OutSgvKDfA5Et3IrDFl7+bJAEFqmSO8wOSdZtvFp KcR4O/DXnr5Wl6cPvzlvooQze8vGGJkXAyIKaC9cuBm/nlzMCBGG8kE0v3kRJ8Sc uSSFkC+P+OlktY4JwXN+mCacDUdVBiiL/uUs1zel6HmociBgh67mgyJ6AfQtGZry yVl9mj44qWZjAzCODv5KnuxlH+gBacdmjcQqwxsZ2P477gfNkxmBXgHeWdfzO9A/ zTUXaBDXg3VdYxQfD8zTWPkCwXYp+YG3SRb9pfrIWIiYuz2UECZTvl/8Upnacz2B POTf+6vcNDlILCtboVE0mKEYR0ckxqrbs0NQloQdmVOfXNyhLml9OrXmwJIffVtE pZ9g428c5bm44lIOiB2eW+QPsXo0s8GxqIrMtxzKsJ3WgFefwLiVDLJBqEt78jRJ RvpGUxrMLgWFubowH8yDmWV+Fp0NpqcqF+GU45z8nGC3OTS+i0ZvUFYgLM6a2uOf sv4bzDPDBg== =uMth -----END PGP SIGNATURE----- Merge tag 'for-5.9/block-merge-20200804' of git://git.kernel.dk/linux-block Pull block stacking updates from Jens Axboe: "The stacking related fixes depended on both the core block and drivers branches, so here's a topic branch with that change. Outside of that, a late fix from Johannes for zone revalidation" * tag 'for-5.9/block-merge-20200804' of git://git.kernel.dk/linux-block: block: don't do revalidate zones on invalid devices block: remove blk_queue_stack_limits block: remove bdev_stack_limits block: inherit the zoned characteristics in blk_stack_limits |
||
Russell King
|
22fcffebed |
MAINTAINERS: update phylink/sfp keyword matching
syzbot has revealed that the "phylink" keyword exists in non-phylink related contexts in the bluetooth stack. To avoid receiving inappropriate notifications, change the keyword matching regexp to something which avoids this, while still allowing changes to networking drivers that make use of phylink to be detected. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
e0fc99e21e |
for-5.9/drivers-20200803
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl8od3oQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgppkpD/9D+XqD9qYcYTj+ShVCc5+3RtMG5ZiAAX0y l4QXomentn/1Y0UYXFGJH7JLZWrKYT0QiktLtfpe5pmTqRUkckTIyJQlsHb+K6Dz lFjtywRK9pcFYgiWIUg80wlJKrTa8QdnrlS/Esn4YITKGRbgMIdFvq2jymXC+1ho RgodlgzcBUREgHSLo0H3cqEKA53fQiJhKC6CbFrFdrkpf2yUpcTfEDtpSwuIuPj3 2AUed1qXUtNjdHciCn3N37OuHqXKAA9noXAWfg9Gx/5zfGUNX9QJvlsny1AopgS0 jJvPSDVAhu/qRLHW6q/ZOT0JAlHegguuTAOtgMh2cMpAS5sumCAtltxVcI7Qnx41 HalMpTefXsVoBo0gfjqldnIPt34ZNj5aH5GYaH/wPpSg6VkTVBJK8GuQDBvg27qT w+U/T6EzuqniWXh/P3COhfrMCR9ueUOY1qWCRwzomlpeIfBhCzidt2wUqIxX1TOA Q0Ltf0eERDevsZbE+tIm+VAAg98kHehcS2t8lfFYFO6/PKu2iJpJt/HtJbZNBE+W rm96E4qXRiy1UuL7D9vBkaWsbnosuNHgGQXx57GlokQU+2IGBmOxV52XHiSxxpXd AS1ZTd56ItmID8VaU09Pbf7ZFbiCgdEAxIbUFzaCuvo+lxryHFphIUARNi/zPnNT UC2OzunCqA== =oADH -----END PGP SIGNATURE----- Merge tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block Pull block driver updates from Jens Axboe: - NVMe: - ZNS support (Aravind, Keith, Matias, Niklas) - Misc cleanups, optimizations, fixes (Baolin, Chaitanya, David, Dongli, Max, Sagi) - null_blk zone capacity support (Aravind) - MD: - raid5/6 fixes (ChangSyun) - Warning fixes (Damien) - raid5 stripe fixes (Guoqing, Song, Yufen) - sysfs deadlock fix (Junxiao) - raid10 deadlock fix (Vitaly) - struct_size conversions (Gustavo) - Set of bcache updates/fixes (Coly) * tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block: (117 commits) md/raid5: Allow degraded raid6 to do rmw md/raid5: Fix Force reconstruct-write io stuck in degraded raid5 raid5: don't duplicate code for different paths in handle_stripe raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show md: print errno in super_written md/raid5: remove the redundant setting of STRIPE_HANDLE md: register new md sysfs file 'uuid' read-only md: fix max sectors calculation for super 1.0 nvme-loop: remove extra variable in create ctrl nvme-loop: set ctrl state connecting after init nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths nvme-multipath: fix logic for non-optimized paths nvme-rdma: fix controller reset hang during traffic nvme-tcp: fix controller reset hang during traffic nvmet: introduce the passthru Kconfig option nvmet: introduce the passthru configfs interface nvmet: Add passthru enable/disable helpers nvmet: add passthru code to process commands nvme: export nvme_find_get_ns() and nvme_put_ns() nvme: introduce nvme_ctrl_get_by_path() ... |
||
Linus Torvalds
|
4834ce9d8e |
linux-kselftest-5.9-rc1
This Kselftest update for Linux 5.9-rc1 consists of - TAP output reporting related fixes from Paolo Bonzini and Kees Cook. These fixes make it skip reporting consistent with TAP format. - Cleanup fixes to framework run_tests from Yauheni Kaliuta -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl8p1akACgkQCwJExA0N QxwqKg/9HzbnpWeb736HAjeA3v0LFuPte8TELSerjKqfas+g9xQxhf+ReHaZXz9i KnhBPYyOb57DjnT7Mi7c5qGYzLKCvBF30OR0M1P5lRWBX3SC0VvkgdHzLpksIsHx 1wIht3gClvdOnHeHWWRG374iCbw86po8Xa5V9KOJOofbEKjctYjiShnd3OXXNLdJ h1/Ro+LffdsqO7VWoJruSuBplCXAVIr8IpUnOhtw/JTGlK7csNHBdHb7KTBm+zKU i0+f6H5uxRM3BA793OHen9D6kHAVLzhtPc7O0O1IhNRKnDgzY/UIS0qSGpxzD6KG +ZZ4FpvyfN2EPqgGegjdTNhQjPrjXpPos46FTNOM/qiQNYvCuvUFjRCAzVuN9cqU QzXdNPUOI7YLpOYpqLNqeefTXhZUxCWPF33oHPhU28W59qYpqQDRRDoOu7l9e7KQ DMwIKCaSw5qCB7S6x5LqOiQcc4/3xIbJVjO/CQU7G4cuREkAHqUvc2rfwCHcn60e rt2h/v2rnHzie4kTEukWKPuyHL64CL0jYTdHtFb/PbavnfbEPe3t6GiGu2DJN680 mem6+9Q12KTtY4VY6enBE4YHVlxQPksbp/o5G91evNuFul1ZsAFgWdR5t+iiMrCU d6u2m5H6dMShZYqTw98MU/PKAh31sQCNZqhruhZMgUOJEV7lP/s= =4uja -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates form Shuah Khan: - TAP output reporting related fixes from Paolo Bonzini and Kees Cook. These fixes make it skip reporting consistent with TAP format. - Cleanup fixes to framework run_tests from Yauheni Kaliuta * tag 'linux-kselftest-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits) selftests/harness: Limit step counter reporting selftests/seccomp: Check ENOSYS under tracing selftests/seccomp: Refactor to use fixture variants selftests/harness: Clean up kern-doc for fixtures selftests: kmod: Add module address visibility test Replace HTTP links with HTTPS ones: KMOD KERNEL MODULE LOADER - USERMODE HELPER selftests: fix condition in run_tests selftests: do not use .ONESHELL selftests: pidfd: skip test if unshare fails with EPERM selftests: pidfd: do not use ksft_exit_skip after ksft_set_plan selftests/harness: Report skip reason selftests/harness: Display signed values correctly selftests/harness: Refactor XFAIL into SKIP selftests/harness: Switch to TAP output selftests: Add header documentation and helpers selftests/binderfs: Fix harness API usage selftests: Remove unneeded selftest API headers selftests/clone3: Reorder reporting output selftests: sync_test: do not use ksft_exit_skip after ksft_set_plan selftests: sigaltstack: do not use ksft_exit_skip after ksft_set_plan ... |
||
Linus Torvalds
|
53e5504bdb |
linux-kselftest-kunit-5.9-rc1
This Kunit update for Linux 5.9-rc1 consists of: - Adds a generic kunit_resource API extending it to support resources that are passed in to kunit in addition kunit allocated resources. In addition, KUnit resources are now refcounted to avoid passed in resources being released while in use by kunit. - Add support for named resources. - Important bug fixes from Brendan Higgins and Will Chen -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl8pyI4ACgkQCwJExA0N QxwQmQ//YXvS1IMt4yLQ7iTrhSK2CavzPi/zX+1bgXj7RfEPrdolF12tcHf7b/Ef UwhG/PTEE6VkBWFuprleGk0fvVW9h13K+2RkN6wkx8rmTMunMhqmMIRj4neGQWQH LV9bYcc5HBH36jbSnJYMFDJdsATq3mmPMeknzkJf/qZgWxczBLo3pUHPNRuhZWq7 MaRUutpo1f3oSroxhcY8gouRjjPq+yUCip9EeQfdZc/LV9tqjwhjfo+zRKAY3jGf 0KL00wv4NMTNBSgLkxXFrTcyP28Y84MZB+wE3ikyE5a5wzzvMXuEtZhJk9a9q2ZJ tZI+ICCjnTa+E3pN93F2w7cwyrQysxNH1tpK0qv1hGXLRuxOGCJ993AeUtIWjnyV CYh/OGK9o92pRuTmoJnMNk9em1WF45YTtvhzpadPiBGb84nbxYSAlrDmm/4xC89p 7PPpkkVxFReMiu1fIyXOV++y33YFMDtoWe/Qn3pLBRpDDs/XWdK0eT4dVWx1/ttl BdtbAxXafApVI5lGk1qPoGC1MO9XvaAidQP6PULD/rhw2Ww6rtlvwGVPffx/omkn zgzPTxH1rBehzKPcEaorQqqR6yGXxb4v+gJi1Tg8qRE51Lw619dfyZlJO7axp2h6 7RO3BOVrIkwLP9XT2NPlL6t+RqbQXezGoZjigLmBRlCSvs1lbLs= =kIIk -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-kunit-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit updates from Shuah Khan: - Add a generic kunit_resource API extending it to support resources that are passed in to kunit in addition kunit allocated resources. In addition, KUnit resources are now refcounted to avoid passed in resources being released while in use by kunit. - Add support for named resources. - Important bug fixes from Brendan Higgins and Will Chen * tag 'linux-kselftest-kunit-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: fix improper treatment of file location kunit: tool: fix broken default args in unit tests kunit: capture stderr on all make subprocess calls Documentation: kunit: Remove references to --defconfig kunit: add support for named resources kunit: generalize kunit_resource API beyond allocated resources |
||
Wei Yongjun
|
7f4bc2e868 |
mmc: mediatek: make function msdc_cqe_disable() static
The sparse tool complains as follows:
drivers/mmc/host/mtk-sd.c:2269:6: warning:
symbol 'msdc_cqe_disable' was not declared. Should it be static?
This function is not used outside of mtk-sd.c, so this commit
marks it static.
Fixes:
|
||
Ludovic Desroches
|
804f178612 |
MAINTAINERS: mmc: sdhci-of-at91: handover maintenance to Eugen Hristev
As Eugen handles the software for bootloaders and new products, handover the maintenance to him. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20200709085331.8145-1-ludovic.desroches@microchip.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |