Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
power_supply_dev_type variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.
In order to accomplish that, export power_supply_attr_group in
power_supply.h and use it with the macro __ATTRIBUTE_GROUPS when defining
power_supply_dev_type in power_supply_core.c. Therefore the attribute group
is no longer static. Lastly, because power_supply_attr_groups is no longer
dynamically associated to power_supply_dev_type in
power_supply_init_attrs(), make the function receive zero arguments.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240224-device_cleanup-power-v2-1-465ff94b896c@marliere.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The ROCK Pi X is a single board computer without batteries using the
AXP288 PMIC where the EFI code does not disable the charger part of
the PMIC causing us to report a discharging battery with a continuously
consumed battery charge to userspace.
Add it to the deny-list to avoid the bogus battery status reporting.
Signed-off-by: Guoyi Zhang <kuoi@bioarchlinux.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240221083425.440108-1-kuoi@bioarchlinux.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The registers related to reset generation are located in the second
register block. However, the conversion to device life-cycle managed
ioremap function accidentally changed the mapping to the first register
block.
Fixes: 0867276eb1 ("power: reset: rmobile-reset: Use devm_platform_ioremap_resource() helper")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/3b267fb1b303f63248934a1a77bee319e1c44879.1708458882.git.geert+renesas@glider.be
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The devm_platform_ioremap_resource() function returns error points. It
never returns NULL. Update the check accordingly.
Fixes: 7ddfd33c6e ("power: reset: xgene-reboot: Use devm_platform_ioremap_resource() helper")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/fe1b90d0-7234-4e03-accc-69a119f6a7eb@moroto.mountain
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Besides the existing STK1A* Cherry Trail based Intel Compute Sticks
already on the deny-list, Intel also made Bay Trail based Compute Sticks
which have a product name of STCK1A* and wich also report a non
existing battery with a random battery charge.
Instead of adding 3 new deny-list entries for the 3 variants of the STCK1A*
sticks consolidate the 2 Cherry Trail STK1AW32SC and STK1A32SC variants
into a single entry with a partial match for STK1A* and add a single new
STCK1A* match for the Bay Trail variants.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240212090014.13719-1-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed register function to simplify probe and
exit paths.
This also makes our data struct per-device and not global, which allows
for more than one instance of this device.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240212162831.67838-20-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Currently all these device data elements are top level global variables.
Move these into a struct. This will be used in the next patch when
the global variable usage is removed. Doing this in two steps makes
the patches easier to read.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240212162831.67838-19-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed register function to simplify probe and
exit paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-18-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed register function to simplify probe.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-17-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed register function to simplify probe and
exit paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-16-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed register function to simplify probe and
exit paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-15-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed register function to simplify probe.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-14-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use this helper to register sys_off handler. Drivers should move away from
setting pm_power_off directly as it only allows for one handler. The new
way allows for trying multiple if the first one doesn't work.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-13-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed register function to simplify probe and
exit paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240212162831.67838-12-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed register function to simplify probe and
exit paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-11-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed ioremap function to simplify probe and
exit paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-10-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed register function to simplify probe.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-9-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed register function to simplify probe.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240212162831.67838-8-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
We only need one member of the struct tps65086_restart, pass that
tps65086_restart_notify() directly. Remove that struct and its
allocation.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-7-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed register function to simplify probe and
exit paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-6-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed register function to simplify probe.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-5-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed ioremap function to simplify probe and
exit paths.
While here add __iomem to the returned pointer to fix a sparse warning.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240212162831.67838-4-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed register function to simplify probe and
exit paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240212162831.67838-3-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device life-cycle managed register function to simplify probe and
exit paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240212162831.67838-2-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The axp803 and axp813 chips can report the detected USB BC mode. SDP,
CDP, and DCP are supported.
Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Link: https://lore.kernel.org/r/20240130203714.3020464-5-aren@peacevolution.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When input_current_limit is set while USB BC is in progress, the BC
module will overwrite the value that was set when it finishes detection.
Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Link: https://lore.kernel.org/r/20240130203714.3020464-4-aren@peacevolution.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
On the axp803 and axp813 chips register 0x30 bits 0-1 is the default
current limit that gets applied after the pmic detects a CDP or DCP
port. The correct field to set is 0x35 bits 4-7.
This field only has nine values (out of the 16 possible if it used all
the bits), so introduce a field size variable to take that into account.
Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Link: https://lore.kernel.org/r/20240130203714.3020464-3-aren@peacevolution.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The current_max property is supposed to be read-only, and represent the
maximum current the supply can provide. input_current_limit is the
limit that is currently set, which is what we have here.
When determining what value to write to the register, we need to pick a
reasonable value if the requested limit doesn't exactly match one
supported by the hardware. If the requested limit is less than the
lowest value we can set, round up to the lowest value. Otherwise round
down to the nearest value supported by hardware.
Also add a dev field to the axp20x_usb_power struct, so we can use
dev_dbg and dev_err in more places.
Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Link: https://lore.kernel.org/r/20240130203714.3020464-2-aren@peacevolution.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240129190246.73067-5-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240129190246.73067-4-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240129190246.73067-3-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240129190246.73067-2-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-22-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed get function. This helps prevent
mistakes like releasing out of order in cleanup functions and
forgetting to release on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-21-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-20-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed get function. This helps prevent
mistakes like releasing out of order in cleanup functions and
forgetting to release on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-19-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-18-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed get function. This helps prevent
mistakes like releasing out of order in cleanup functions and
forgetting to release on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-17-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-15-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-14-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-13-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-12-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-11-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-7-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-6-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-5-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-4-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-3-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use the device lifecycle managed register function. This helps prevent
mistakes like unregistering out of order in cleanup functions and
forgetting to unregister on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123163653.384385-2-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This value only needs read once. Move that read into the function
that returns the value to keep the logic all in one place. This
also avoids doing this check every time we read in values in
the device update poll worker.
While here, correct this function's error message.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123150914.308510-5-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
