drm_debug_enabled() is the way to check. __drm_debug is now reserved for
drm print code only. No functional changes.
v2: Rebase on move unlikely() to drm_debug_enabled()
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/840ff7292d1a39512bac2fcb1f45de9d50694bf1.1572258936.git.jani.nikula@intel.com
Adds gamma and color-transform support for DOU-IPS.
Adds two caps members fgamma_coeffs and ctm_coeffs to komeda_improc_state.
If color management changed, set gamma and color-transform accordingly.
v5: Rebase with drm-misc-next
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112110927.20931-5-james.qian.wang@arm.com
This function is for converting drm_color_ctm matrix to komeda hardware
required required Q2.12 2's complement CSC matrix.
v2:
Move the fixpoint conversion function s31_32_to_q2_12() to drm core
as a shared helper.
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112110927.20931-4-james.qian.wang@arm.com
Add a new helper function drm_color_ctm_s31_32_to_qm_n() for driver to
convert S31.32 sign-magnitude to Qm.n 2's complement that supported by
hardware.
V4: Address Mihai, Daniel and Ilia's review comments.
V5: Includes the sign bit in the value of m (Qm.n).
V6: Allows m = 0 according to Mihail's comments.
V7: Address Mihail's comments.
V8: Use type 'u32' to replace 'uint32_t'
V9: Rebase.
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112110927.20931-2-james.qian.wang@arm.com
Not sure we don't yet have this as a patch somewhere ...
Motivation is that the automatic lifetime management of the generic fbdev
code is quite tricky, and it'll get even more tricky. Allowing drivers
to just use the fb_probe looks like a recipe for disaster.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112175048.1581-1-daniel.vetter@ffwll.ch
The driver assumes that the platform uses the device tree, and thus relies
on some fields (of_node) being declared in some structures (drm_bridge).
This isn't true for all platforms, so make sure we can only compile the
ANX6345 on platforms where DT support is selected.
Cc: Torsten Duwe <duwe@lst.de>
Fixes: 6aa1926980 ("drm/bridge: Add Analogix anx6345 support")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112204551.541449-1-maxime@cerno.tech
The anx6345 driver originally was copied from anx78xx.c, which has meanwhile
seen a few changes. In particular, the removal of drm_dp_link helpers and the
discontinuation to include drm_bridge.h from drm_crtc.h breaks compilation
in linux-5.5. Apply equivalents of these changes to anx6345.c.
Fixes: 6aa1926980 ("drm/bridge: Add Analogix anx6345 support")
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112175940.GA13539@lst.de
It's possible to get multiple events in a single frame/flip, so add an
option to print them all.
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107114155.54307-6-mihail.atanassov@arm.com
It's potentially useful information when diagnosing error/warn IRQs, so
dump it to dmesg with a drm_info_printer. Hide this extra debug dumping
behind another komeda_dev->err_verbosity bit.
Note that there's not much sense in dumping it for INFO events,
since the VSYNC event will swamp the log.
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107114155.54307-4-mihail.atanassov@arm.com
Named 'err_verbosity', currently with only 1 active bit in that
replicates the existing level - print error events once per flip.
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107114155.54307-2-mihail.atanassov@arm.com
Disabling the display using MCDE currently results in a warning
together with a delay caused by some timeouts:
mcde a0350000.mcde: MCDE display is disabled
------------[ cut here ]------------
WARNING: CPU: 0 PID: 20 at drivers/gpu/drm/drm_atomic_helper.c:2258 drm_atomic_helper_commit_hw_done+0xe0/0xe4
Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support)
Workqueue: events drm_mode_rmfb_work_fn
[<c010f468>] (unwind_backtrace) from [<c010b54c>] (show_stack+0x10/0x14)
[<c010b54c>] (show_stack) from [<c079dd90>] (dump_stack+0x84/0x98)
[<c079dd90>] (dump_stack) from [<c011d1b0>] (__warn+0xb8/0xd4)
[<c011d1b0>] (__warn) from [<c011d230>] (warn_slowpath_fmt+0x64/0xc4)
[<c011d230>] (warn_slowpath_fmt) from [<c0413048>] (drm_atomic_helper_commit_hw_done+0xe0/0xe4)
[<c0413048>] (drm_atomic_helper_commit_hw_done) from [<c04159cc>] (drm_atomic_helper_commit_tail_rpm+0x44/0x6c)
[<c04159cc>] (drm_atomic_helper_commit_tail_rpm) from [<c0415f5c>] (commit_tail+0x50/0x10c)
[<c0415f5c>] (commit_tail) from [<c04160dc>] (drm_atomic_helper_commit+0xbc/0x128)
[<c04160dc>] (drm_atomic_helper_commit) from [<c0430790>] (drm_framebuffer_remove+0x390/0x428)
[<c0430790>] (drm_framebuffer_remove) from [<c0430860>] (drm_mode_rmfb_work_fn+0x38/0x48)
[<c0430860>] (drm_mode_rmfb_work_fn) from [<c01368a8>] (process_one_work+0x1f0/0x43c)
[<c01368a8>] (process_one_work) from [<c0136d48>] (worker_thread+0x254/0x55c)
[<c0136d48>] (worker_thread) from [<c013c014>] (kthread+0x124/0x150)
[<c013c014>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xeb14dfb0 to 0xeb14dff8)
dfa0: 00000000 00000000 00000000 00000000
dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace 314909bcd4c7d50c ]---
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:crtc-0] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:DSI-1] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] flip_done timed out
The reason for this is that there is a vblank event pending, but we
never handle it after disabling the vblank interrupts.
Check if there is an vblank event pending when disabling the display,
and clear it by sending a fake vblank event in that case.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-8-stephan@gerhold.net
The DSI initialization sequence incorrectly assumes that the mode_set()
function of the DRM bridge is always called when (re-)enabling the display.
This is not necessarily the case.
Keeping the device idle in the framebuffer console for a while results
in the display being turned off using the disable() function. However,
as soon as any key is pressed only (pre_)enable() are called.
mode_set() is skipped because the mode has not been changed.
In this case, the DSI HS/LP clocks are never turned back on,
preventing the display from working.
Fix this by moving a part of the initialization sequence from
mode_set() to pre_enable(). Keep most of the video mode setup in
mode_set() since most of the registers are only dependent on the mode
that is set for the panel - there is no need to write them again each
time we re-enable the display.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-7-stephan@gerhold.net
Using a (single) DSI display with MCDE currently results in
two "connected" connectors:
Connector: DSI-1
id : 34
encoder id : 0
conn : connected
size : 0x0 (mm)
count_modes : 0
count_props : 5
props : 1 2 5 6 4
count_encoders : 1
encoders : 33
Connector: DSI-2
id : 35
encoder id : 33
conn : connected
size : 53x89 (mm)
count_modes : 1
count_props : 5
props : 1 2 5 6 4
count_encoders : 1
encoders : 33
Mode: "480x800" 480x800 60
Although both show up as connected, the first one does not have
any size and no available modes. This confuses userspace tools
(e.g. kmscube) who look for available modes for the first connector.
The reason for the duplicated connector is that mcde_dsi.c and the
DRM panel bridge helper both set up a DSI connector, with more or less
the same code. The connector set up by the DRM panel bridge is the
one that is correctly set up in the example above.
Therefore we can just remove the connector setup from mcde_dsi.c
and let the DRM core handle all the hard work.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-6-stephan@gerhold.net
The initialization order for DSI video mode is important - if we
enable the video stream generator (VSG) before the MCDE DSI formatter
starts sending pixel data, it will immediately run into an error and
disable itself again.
Avoid this problem by delaying the activation of the VSG
until the MCDE DSI formatter is properly set up and running
(i.e. when mcde_dsi_bridge_enable() is called).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-5-stephan@gerhold.net
Triggering an error conditions in DSI video mode only results in
a very generic "some video mode error status" error message
at the moment.
Make this more clear by adding separate error messages for each bit.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-4-stephan@gerhold.net
The MCDE driver differentiates only between "te_sync"
(for hardware TE0 sync) and software sync
(i.e. manually triggered updates) at the moment.
However, none of these options work correctly for video mode panels.
Therefore, we need to make some changes to make them work correctly:
- Select hardware sync coming from the (DSI) formatter.
- Keep the FIFO permanently enabled (otherwise MCDE will stop
feeding data to the panel).
- Skip manual software sync (this is not necessary in video mode).
Automatically detect if the connected panel is using video mode
and enable the necessary changes in that case.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-3-stephan@gerhold.net
At the moment, vblank handling is only enabled together with
TE synchronization. However, the vblank IRQ is also working with
on displays without TE synchronization (e.g. DSI video mode panels).
It seems like the vblank IRQ is actually generated by the
MCDE hardware for the channel.
Therefore, the vblank handling should be working correctly in
all the cases and we can enable it unconditionally.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-2-stephan@gerhold.net
Replace the use of the dev_err macro with the DRM_DEV_ERROR
DRM helper macro. rockchip driver uses almost exclusively DRM_* logging
(aside from 2 dev_* instances, one of which is converted in this patch),
so this makes things more consistent.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
[seanpaul expanded on the commit message]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107092945.15513-1-wambui.karugax@gmail.com
Udl's GEM code and the generic SHMEM are almost identical. Replace
the former with SHMEM. The dmabuf support in udl is being replaced
with generic GEM PRIME functions.
The main difference is in the caching flags for mmap pages. By
default, SHMEM always sets (uncached) write combining. In udl's
memory management code, only imported buffers use write combining.
Memory pages of locally created buffer objects are mmap'ed with
caching enabled. To keep the optimization, udl provides its own
mmap function for GEM objects where it fixes up the mapping flags.
v3:
- restore udl vmap that enables caching
v2:
- remove obsolete code in a separate patch
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107094307.19870-4-tzimmermann@suse.de
In preparation of a switch to SHMEM, udl now allocates its GEM
objects via struct drm_driver.gem_create_object. No functional
changes are made.
For SHMEM GEM objects, udl will require the use of a special mmap
function, which we set though the create-object function.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107094307.19870-3-tzimmermann@suse.de
The flags field in struct udl_gem controls mapping parameters: cached
access for local buffers, write-combined access for imported buffers.
We can drop the field and distinguish both cases by testing whether
struct drm_gem_object.import_attach is NULL.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107094307.19870-2-tzimmermann@suse.de
Finally clean up the VMA setup for radeon now that TTM exports the
necessary functions.
No functional change, but only compile tested.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/339354/
That is needed by at least a cleanup in radeon.
v2: also export ttm_bo_vm_access
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/339353/
This commit sets the remaining atomic-modesetting helpers and the flag
DRIVER_ATOMIC. Legacy cursor functions are removed in favor of the cursor
plane. For power management, atomic helpers replace the indvidual
operations that the driver currently runs.
Atomic modesetting is enabled with this commit.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-10-tzimmermann@suse.de
The cursor plane uses an internal format of ARGB4444. To userspace, we
announce ARGB8888 and do the transformation internally.
v2:
* don't set plane call-back functions to NULL explicitly
* define plane format array in global scope
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-9-tzimmermann@suse.de
As the CRTC code has already been prepared for a split between mode
setting and plane handling, most of the CRTC's atomic modesetting is
build upon primitives of the non-atomic implementation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-8-tzimmermann@suse.de
Like the original mode-setting code, the primary plane supports XRGB888,
RGB565 and C8. The plane itself only pins BOs and sets the base address
and scanline offset. The mode-setting code will be located in the CRTC's
atomic helpers.
v2:
* don't set plane call-back functions to NULL explicitly
* define plane format array in global scope
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-7-tzimmermann@suse.de
The implementation of ast_set_vbios_mode() converts a DRM display mode
and framebuffer into an adjusted mode and stores information for the
video BIOS to several scratch regsiters.
Here we split the function into individual functions that do the
conversion, set the VBIOS mode information and format information.
This makes it compatible with support for primary planes and atomic
modesetting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-6-tzimmermann@suse.de
In ast_set_ext_reg() sets several framebuffer options and CRT threshold
parameters. The former is mostly state of the primary plane; the latter
is constant. Hence, split the function in two and make it work with
atomic modesetting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-5-tzimmermann@suse.de
The content of the base-address and offset registers are state of
the primary plane. Clearing it to default values will interfere with
plane functions for atomic mode setting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-4-tzimmermann@suse.de
Each video mode's primary plane requires a minimum amount of video
memory. For double buffering, this is at most half the available
VRAM. Check this constraint.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-3-tzimmermann@suse.de
The ANX6345 is an ultra-low power DisplayPower/eDP transmitter designed
for portable devices. This driver adds initial support for RGB to eDP
mode, without HPD and interrupts.
This is a configuration usually seen in eDP applications.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135220.590D968BFE@verein.lst.de
Add bit definitions required for the anx6345 and add a
sanity check in anx_dp_aux_transfer.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135218.01C2168C4E@verein.lst.de
Some code can be shared within different DP bridges by Analogix.
Extract them to analogix_dp.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135214.966BD68BFE@verein.lst.de
Some definitions currently in analogix-anx78xx.h are not restricted to
the ANX78xx series, but also applicable to other DisplayPort
transmitters by Analogix.
Split out them to dedicated headers, and make analogix-anx78xx.h include
them.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135212.4D41E68BE1@verein.lst.de
As ANA78xx chips are designed and produced by Analogix Semiconductor,
Inc, move their driver codes into analogix subdirectory.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135202.2089C68BE1@verein.lst.de
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <b8faad34102a91698b55dfc1ce02b1a90fda5e44.1564591626.git.andrzej.p@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/ <db323a3cdfd643cef65d796e959c16a14f105920.1564591626.git.andrzej.p@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/ <b8faad34102a91698b55dfc1ce02b1a90fda5e44.1564591626.git.andrzej.p@collabora.com
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ <db323a3cdfd643cef65d796e959c16a14f105920.1564591626.git.andrzej.p@collabora.com
Switch to using the ddc provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <613c1c09ff7db5be60ef86f930b45b3f56b4838d.1564591626.git.andrzej.p@collabora.com
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/ <1e343b02195757bfbf60ca8999cadeb376db204e.1566845537.git.andrzej.p@collabora.com
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ <a1f778d328328f15300338600bb2400850717300.1566845537.git.andrzej.p@collabora.com
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ <4cad24dde4508cec17483f983da08226ba7e48b0.1566845537.git.andrzej.p@collabora.com
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <40293fa4e619d1d1af213a076b1d03440e50c56c.1566845537.git.andrzej.p@collabora.com
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <3c8b030bb89ec5aeafdb3c294cb6b3403d8c0601.1566845537.git.andrzej.p@collabora.com
Add helper functions for sending the DSI compression mode and picture
parameter set data type packets. For the time being, limit the support
to using VESA DSC 1.1 and the default PPS. This may need updating if the
need arises for proprietary compression or non-default PPS, however keep
it simple for starters.
v2: Add missing EXPORT_SYMBOL
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-5-jani.nikula@intel.com
The DCS command has been named SET_PARTIAL_ROWS in the DCS spec since
v1.02, for more than a decade. Rename the enumeration to match the spec.
v2: add comment about the rename (David Lechner)
Cc: David Lechner <david@lechnology.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-4-jani.nikula@intel.com
Rename picture parameter set (it's a long packet, not a long write) and
compression mode (it's not a DCS command) enumerations according to the
DSI specification. Order the types according to the spec. Use tabs
instead of spaces for indentation. Use all lower case for hex.
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-1-jani.nikula@intel.com
Legacy (non-atomic) page flip support is added to the driver by using the
mode_set_base CRTC function, that allows configuring a new framebuffer for
display. Since the function requires the primary plane's fb to be set
already, this is done prior to calling the function in the page flip helper
and reverted if the flip fails.
The vblank interrupt handler is also refactored to support passing an event.
The PIPE_TE_STATUS bit is also considered to indicate vblank on medfield
only, as explained in psb_enable_vblank.
It was tested by running weston on both poulsbo and cedartrail.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106094400.445834-3-paul.kocialkowski@bootlin.com
This adds a missing call to drm_crtc_vblank_on to the common DPMS helper
(used by poulsbo and cedartrail), which is called in the CRTC enable path.
With that call, it becomes possible to enable vblank when needed.
It is already balanced by a drm_crtc_vblank_off call in the helper.
Other platforms (oaktrail and medfield) use a dedicated DPMS helper that
does not have the proper vblank on/off hooks. They are not added in this
commit due to lack of hardware to test it with.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106094400.445834-2-paul.kocialkowski@bootlin.com
Simplify this function implementation by using a known wrapper function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/64a6ea39-3e4b-2ebe-74f7-98720e581e3e@web.de
With nouveau fixed all ttm-using drives have the correct nesting of
mmap_sem vs dma_resv, and we can just lock the buffer.
Assuming I didn't screw up anything with my audit of course.
v2:
- Dont forget wu_mutex (Christian König)
- Keep the mmap_sem-less wait optimization (Thomas)
- Use _lock_interruptible to be good citizens (Thomas)
v3: Rebase over fault handler helperification.
Reviewed-by: Christian König <christian.koenig@amd.com> (v2)
Reviewed-by: Thomas Hellström <thellstrom@vmware.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-3-daniel.vetter@ffwll.ch
We can't copy_*_user while holding reservations, that will (soon even
for nouveau) lead to deadlocks. And it breaks the cross-driver
contract around dma_resv.
Fix this by adding a slowpath for when we need relocations, and by
pushing the writeback of the new presumed offsets to the very end.
Aside from "it compiles" entirely untested unfortunately.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-2-daniel.vetter@ffwll.ch
Properties can't be attached after registering, userspace would get
confused (no one bothers to reprobe really).
- Add kerneldoc
- Enforce this with some checks. This needs a somewhat ugly check
since connectors can be added later on, but we still need to attach
all properties before they go public.
Note that we already enforce that properties themselves are created
before the entire device is registered.
Unfortunately this doesn't work for drivers which have a ->load
callback, see
commit e0f32f78e5 (tag:
drm-misc-next-fixes-2019-09-18)
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Sep 17 14:09:35 2019 +0200
drm/kms: Duct-tape for mode object lifetime checks
for the full story.
v2: Fix the superflous newline (Jani) and add commit citation to
explain why we need to check for dev->registered (Thierry).
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rajat Jain <rajatja@google.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023144953.28190-1-daniel.vetter@ffwll.ch
Fixes: 75a57669cb ("drm/ttm: add ttm_sg_tt_init")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.kernel.org/patch/10263323/
The default TTM fault handler may not be completely sufficient
(vmwgfx needs to do some bookkeeping, control the write protectionand also
needs to restrict the number of prefaults).
Also make it possible replicate ttm_bo_vm_reserve() functionality for,
for example, mkwrite handlers.
So turn the TTM vm code into helpers: ttm_bo_vm_fault_reserved(),
ttm_bo_vm_open(), ttm_bo_vm_close() and ttm_bo_vm_reserve(). Also provide
a default TTM fault handler for other drivers to use.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/332900/?series=67217&rev=1
Signed-off-by: Christian König <christian.koenig@amd.com>
The explicit typcasts are meaningless, so remove them.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/332899/
Signed-off-by: Christian König <christian.koenig@amd.com>
Commit c40069cb7b ("drm: add mmap() to drm_gem_object_funcs")
introduced a GEM object mmap() hook which is expected to subtract the
fake offset from vm_pgoff. However, for mmap() on dmabufs, there is not
a fake offset.
To fix this, let's always call mmap() object callback with an offset of 0,
and leave it up to drm_gem_mmap_obj() to remove the fake offset.
TTM still needs the fake offset, so we have to add it back until that's
fixed.
Fixes: c40069cb7b ("drm: add mmap() to drm_gem_object_funcs")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024191859.31700-1-robh@kernel.org
Instead of tracking per-slot utilisation track a single value for the
entire GPU. Ultimately it doesn't matter if the GPU is busy with only
vertex or a combination of vertex and fragment processing - if it's busy
then it's busy and devfreq should be scaling appropriately.
This also makes way for being able to submit multiple jobs per slot
which requires more values than the original boolean per slot.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025134143.14324-3-steven.price@arm.com
Use dev_pm_opp_set_rate() instead of open coding the devfreq
integration, simplifying the code.
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025134143.14324-2-steven.price@arm.com
Commit 7d79aa8628 ("drm/vboxvideo: Replace struct vram_framebuffer
with generic implemenation") removed the diy framebuffer code from
the vboxvideo driver, resulting in a nice cleanup.
But since the vboxvideo driver needs the generic dirty tracking code,
it's drm_mode_config_funcs.fb_create should be set to
drm_gem_fb_create_with_dirty not drm_gem_fb_create.
This commit fixes this, fixing the framebuffer not always updating.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 7d79aa8628 ("drm/vboxvideo: Replace struct vram_framebuffer with generic implemenation")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028133159.236550-1-hdegoede@redhat.com
Instead of relying on the DRM functions just implement our own import
functions. This prepares support for taking care of unpinned DMA-buf.
v2: enable for all exporters, not just amdgpu, fix invalidation
handling, lock reservation object while setting callback
v3: change to new dma_buf attach interface
v4: split out from unpinned DMA-buf work
v5: rebased and cleanup on new DMA-buf interface
v6: squash with invalidation callback change,
stop using _(map|unmap)_locked
v7: drop invalidations when the BO is already in system domain
v8: rebase on new DMA-buf patch and drop move notification
v9: cleanup comments
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/337948/
Add an DMA-buf export implementation independent of the DRM helpers.
This not only avoids the caching of DMA-buf mappings, but also
allows us to use the new dynamic locking approach.
This is also a prerequisite of unpinned DMA-buf handling.
v2: fix unintended recursion, remove debugging leftovers
v3: split out from unpinned DMA-buf work
v4: rebase on top of new no_sgt_cache flag
v5: fix some warnings by including amdgpu_dma_buf.h
v6: fix locking for non amdgpu exports
v7: rebased on new DMA-buf locking patch
v8: drop extra include
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/337949/
There are no users of drm_fb_helper_defio_init(), so we can remove
it. The documentation around defio support is a bit misleading and
should mention compatibility issues with SHMEM helpers. Clarify this.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025092759.13069-2-tzimmermann@suse.de
drm_sched_cleanup_jobs() attempts to free finished jobs, however because
it is called as the condition of wait_event_interruptible() it must not
sleep. Unfortunately some free callbacks (notably for Panfrost) do sleep.
Instead let's rename drm_sched_cleanup_jobs() to
drm_sched_get_cleanup_job() and simply return a job for processing if
there is one. The caller can then call the free_job() callback outside
the wait_event_interruptible() where sleeping is possible before
re-checking and returning to sleep if necessary.
Tested-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Fixes: 5918045c4e ("drm/scheduler: rework job destruction")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/337652/
Those are not supposed to be used by drivers.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/333290/
The ttm_mem_io_* functions were intended to be internal to TTM and
shouldn't have been used in a driver. They were exported in commit
afe6804c04 just for QXL.
Instead call the qxl_ttm_io_mem_reserve() function directly and
completely drop the free call since that is a dummy on QXL.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/333289/
This way the TTM is destroyed with the correct dma_resv object
locked and we can even pipeline imported BO evictions.
v2: Limit this to only cases when the parent object uses a separate
reservation object as well. This fixes another OOM problem.
v3: fix init and try_lock on the wrong object
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/337499/
As the name says global memory and bo accounting is global. So it doesn't
make to much sense having pointers to global structures all around the code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/332879/
This allows blocking for BOs to become available
in the memory management.
Amdgpu is doing this for quite a while now during CS. Now
apply the new behavior to all drivers using TTM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/332878/
This feature is only used by vmwgfx and superfluous for everybody else.
Signed-off-by: Christian König <christian.koenig@amd.com>
Co-developed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Tested-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/333650/
This patch implements prepare_fb() and cleanup_fb() in hibmc with the
GEM VRAM helpers. In the current code, pinning the BO is performed by
hibmc_plane_atomic_update(), where the operation does not belong.
This patch also fixes a bug where the pinned BO was never unpinned.
Pinning multiple BOs would have exhaused the available VRAM and further
pin operations would have failed, leaving the display in a corrupt
state.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024081404.6978-4-tzimmermann@suse.de
GEM VRAM provides an implementation for prepare_fb() and cleanup_fb()
of struct drm_simple_display_pipe_funcs. Switch over bochs.
v2:
* use helpers for struct drm_simple_display_pipe_funcs
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024081404.6978-3-tzimmermann@suse.de
The new helpers pin and unpin a framebuffer's GEM VRAM objects during
plane updates. This should be sufficient for most drivers' implementation
of prepare_fb() and cleanup_fb().
v2:
* provide helpers for struct drm_simple_display_pipe_funcs
* rename plane-helper funcs
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024081404.6978-2-tzimmermann@suse.de
Passing the wrong type feels icky, everywhere else we use the pipe as
the first parameter. Spotted while discussing patches with Thomas
Zimmermann.
v2: Make xen compile correctly
Acked-By: Thomas Zimmermann <tzimmermann@suse.de> (v1)
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023101256.20509-1-daniel.vetter@ffwll.ch
During the discussion of patches that enhance the drm_dp_link helpers it
was concluded that these helpers aren't very useful to begin with. After
all other drivers have been converted not to use these helpers anymore,
move these helpers into the last remaining user: Tegra DRM.
If at some point these helpers are deemed more widely useful, they can
be moved out into the DRM DP helpers again.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021143437.1477719-14-thierry.reding@gmail.com
During the discussion of patches that enhance the drm_dp_link helpers it
was concluded that these helpers aren't very useful to begin with. Start
pushing the equivalent code into individual drivers to ultimately remove
them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021143437.1477719-13-thierry.reding@gmail.com
During the discussion of patches that enhance the drm_dp_link helpers it
was concluded that these helpers aren't very useful to begin with. Start
pushing the equivalent code into individual drivers to ultimately remove
them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021143437.1477719-12-thierry.reding@gmail.com
During the discussion of patches that enhance the drm_dp_link helpers it
was concluded that these helpers aren't very useful to begin with. Start
pushing the equivalent code into individual drivers to ultimately remove
them.
v3: make link rate unsigned int to avoid overflow
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021143437.1477719-10-thierry.reding@gmail.com
During the discussion of patches that enhance the drm_dp_link helpers it
was concluded that these helpers aren't very useful to begin with. Start
pushing the equivalent code into individual drivers to ultimately remove
them.
v4: use bulk DPCD writes if possible (Daniel Vetter)
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022145211.2258525-1-thierry.reding@gmail.com
If the transmitter supports pre-emphasis post cursor2 the sink will
request adjustments in a similar way to how it requests adjustments to
the voltage swing and pre-emphasis settings.
Add a helper to extract these adjustments on a per-lane basis from the
DPCD link status.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021143437.1477719-8-thierry.reding@gmail.com
Use microsecond sleeps for the clock recovery and channel equalization
delays during link training. The duration of these delays can be from
100 us up to 16 ms. It is rude to busy-loop for that amount of time.
While at it, also convert to standard coding style by putting the
opening braces in a function definition on a new line. Also switch to
using an unsigned int for the AUX read interval to match the data type
of the parameters to usleep_range().
v2: use correct multiplier for training delays (Philipp Zabel)
v3: clarify data type change in commit message
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021143437.1477719-7-thierry.reding@gmail.com
It's idiomatic to check the return value of a function call immediately
after the function call, without any blank lines in between, to make it
more obvious that the two lines belong together.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021143437.1477719-3-thierry.reding@gmail.com
Parroting Daniel's backmerge justification from
2e79e22e09:
Thierry needs fd70c7755b ("drm/bridge: tc358767: fix max_tu_symbol
value") to be able to merge his dp_link patch series.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl2su/AeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvm4H/1jkheCrvB/GJS69
wd18vizAg+eFmNCzxlGVhpQTKGymNRy+g6clnoli3cNJ3pSVKcYgVyB3oXaONIhp
g/ANudnBjTdjqYgJzfLij5AGecrGwDpF3YL0kuKrCB63s2I/HwQGYy/aPrYY8emy
gAYdaf1DGRu5/DIIB6soTo/TnpKoAyTE+XY5MaPSug++t/Flov19tlU40IZxXW94
bjTXbm0yklrsIx+LL5mYYGGnygSTCF66JjFg1qhDCBQaS2MZ21h1ZgaOtGZTwZcc
WgEiqLC5S1Iyj96zir1t78RcVQ4RzgvDbhUOgIqUFsYAO2wOicvxyFE3Hj8rPOKd
uGgVPRM=
=xgZa
-----END PGP SIGNATURE-----
Merge v5.4-rc4 into drm-next
Thierry needs fd70c7755b ("drm/bridge: tc358767: fix max_tu_symbol
value") to be able to merge his dp_link patch series.
Some adjacent changes conflicts, plus some clashes in i915 due to
cherry-picking and git trying to be helpful and leaving both versions
in.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is not something we'll fix, because failing to clean up stuff (or
doing it in the wrong order) is a driver bug. The offending FIXME goes
all the way back to the original modeset merge.
We've added a WARN_ON in
commit 2b677e8c08
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Dec 10 21:16:05 2012 +0100
drm: reference framebuffers which are on the idr
including a comment blaming drivers on this. Right thing to do is most
likely drm_atomic_helper_shutdown plus making sure that
drm_mode_config_cleanup is not called too early (i.e. not in driver
unload, but only in the final drm_device release callback).
Cc: Mihail Atanassov <Mihail.Atanassov@arm.com>
Reported-by: Mihail Atanassov <Mihail.Atanassov@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022163717.1064-1-daniel.vetter@ffwll.ch
Add a function to fill the AVI infoframe bar information from
the standard tv margin properties.
Cc: Eric Anholt <eric@anholt.net>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008164814.5894-1-ville.syrjala@linux.intel.com
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
GCC complains about dubious bitwise OR operand:
drivers/gpu/drm/drm_mipi_dbi.c:1024:49: warning: dubious: x | !y
CC [M] drivers/gpu/drm/drm_mipi_dbi.o
As long as buffer is consist of byte (u8) values, we may use
simple right shift and satisfy compiler. It also reduces amount of
operations needed.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017114912.61522-1-andriy.shevchenko@linux.intel.com
Not sure what this hook is supposed to do. vmf->vma->vm_private_data
should never be NULL, so the extra check in qxl_ttm_fault should have no
effect.
Drop it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20191017132638.9693-2-kraxel@redhat.com
Remove unnecessary variable `ret` in drm_dp_atomic_find_vcpi_slots()
only used to hold the function return value and have the function
return the value directly.
Issue found by coccinelle:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191019071840.16877-1-wambui@karuga.xyz
"clock" may be copied to "best_clock". Initializing best_clock
is not sufficient. The fix initializes clock as well to avoid
memory disclosures and informaiton leaks.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018044150.1899-1-kjlu@umn.edu
`best_clock` is an object that may be sent out. Object `clock`
contains uninitialized bytes that are copied to `best_clock`,
which leads to memory disclosure and information leak.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018042953.31099-1-kjlu@umn.edu
- R-Car DU fixes for H2 ES2.0 and later revisions
-----BEGIN PGP SIGNATURE-----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=daVY
-----END PGP SIGNATURE-----
Merge tag 'du-next-20191016' of git://linuxtv.org/pinchartl/media into drm-next
- R-Car DU support for R8A774B1 SoC
- R-Car DU fixes for H2 ES2.0 and later revisions
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015215116.GF19403@pendragon.ideasonboard.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zkCu
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.5' of https://github.com/ckhu-mediatek/linux.git-tags into drm-next
Mediatek DRM next for Linux 5.5
This include mipi_tx, dsi, and partial crtc for MT8183 SoC.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1571103548.4416.6.camel@mtksdaap41
Although the ring management is much smaller compared to the other GT
power management functions, continue the theme of extracting it out of
the huge intel_pm.c for maintenance.
Based on a patch by Chris Wilson.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191020184139.9145-1-chris@chris-wilson.co.uk
The current logic just reapplies the same configuration already stored
into stream->oa_config instead of the newly selected one.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 7831e9a965 ("drm/i915/perf: Allow dynamic reconfiguration of the OA stream")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191019214647.27866-1-lionel.g.landwerlin@intel.com
This way it's easier to figure out what didn't match when we have
multiple pipes enabled.
v2: pass drm_crtc and use the more common [CRTC:%d:%s] format
(Ville)
v3: use struct intel_crtc type to pass crtc around (Ville)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015164029.18431-5-lucas.demarchi@intel.com
Both Ice Lake and Elkhart Lake (gen 11) support MST on all external
connections except DDI A. Tiger Lake (gen 12) supports on all external
connections.
Move the check to happen inside intel_dp_mst_encoder_init() and add
specific platform checks.
v2: Replace != with == checks for ports on gen < 11 (Ville)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015164029.18431-3-lucas.demarchi@intel.com
In the transcoder port sync mode, the slave transcoders mask their vblanks
until master transcoder's vblank so while disabling them, make
sure slaves are disabled first and then the masters.
v5:
* Dont pass dev priv to get_slave_crtc (Ville)
v4:
* Obtain slave state from master (Maarten)
v3:
* Rebase
v2:
* Use the intel_old_crtc_state_disables() helper
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-6-manasi.d.navare@intel.com
This clears the transcoder port sync bits of the TRANS_DDI_FUNC_CTL2
register during crtc_disable().
v3:
* Rebase on maarten's patches
v2:
* Directly write the trans_port_sync reg value (Maarten)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-5-manasi.d.navare@intel.com
As per the display enable sequence, we need to follow the enable sequence
for slaves first with DP_TP_CTL set to Idle and configure the transcoder
port sync register to select the corersponding master, then follow the
enable sequence for master leaving DP_TP_CTL to idle.
At this point the transcoder port sync mode is configured and enabled
and the Vblanks of both ports are synchronized so then set DP_TP_CTL
for the slave and master to Normal and do post crtc enable updates.
v11:
* Rebase (Manasi)
v10:
* in trans sync mode, dont stop link train for tgl (Manasi)
v9:
Remove update_scanline_offset to rebase on Maarten's patch (Manasi)
v8:
* Rebase on Maarten's patches (Manasi)
v7:
* Use ffs(slaves) to get slave crtc (Ville)
v6:
* Modeset implies active_changed, remove one condition (Maarten)
v5:
* Fix checkpatch warning (Manasi)
v4:
* Reuse skl_commit_modeset_enables() hook (Maarten)
* Obtain slave crtc and states from master (Maarten)
v3:
* Rebase on drm-tip (Manasi)
v2:
* Create a icl_update_crtcs hook (Maarten, Danvet)
* This sequence only for CRTCs in trans port sync mode (Maarten)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-4-manasi.d.navare@intel.com
After the state is committed, we readout the HW registers and compare
the HW state with the SW state that we just committed.
For Transcdoer port sync, we add master_transcoder and the
salves bitmask to the crtc_state, hence we need to read those during
the HW state readout to avoid pipe state mismatch.
v11:
* Move master trans init to get pipe_Config hooks (Ville)
v10:
* Initialize master_tarnscoder readout for all platforms (Ville)
v9:
* Initialize master_transcoder = INVALID at get config (Ville)
v8:
* Use master_select -1, address TRANS_EDP case (Ville)
* Rename master_transcoder to _readout (Lucas)
v7:
* NDont read HW state for DSI
v6:
* Go through both parts of HW readout (Maarten)
* Add a WARN if the same trans configured as
master and slave (Ville, Maarten)
v5:
* Add return INVALID in defaut case (Maarten)
v4:
* Get power domains in master loop for get_config (Ville)
v3:
* Add TRANSCODER_D (Maarten)
* v3 Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
v2:
* Add Transcoder_D and MISSING_CASE (Maarten)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-3-manasi.d.navare@intel.com
In case of tiled displays where different tiles are displayed across
different ports, we need to synchronize the transcoders involved.
This patch implements the transcoder port sync feature for
synchronizing one master transcoder with one or more slave
transcoders. This is only enbaled in slave transcoder
and the master transcoder is unaware that it is operating
in this mode.
This has been tested with tiled display connected to ICL.
v7:
* Rebase on Maarten's patches
v6:
* Use master_trans +1 and address missing trans_edp case (Ville)
v5:
* Add TRANSCODER_D case and MISSING_CASE (Maarten)
v4:
Rebase
v3:
* Check of DP_MST moved to atomic_check (Maarten)
v2:
* Do not use RMW, just write to the register in commit (Jani N)
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-2-manasi.d.navare@intel.com
In case of tiled displays when the two tiles are sent across two CRTCs
over two separate DP SST connectors, we need a mechanism to synchronize
the two CRTCs and their corresponding transcoders.
So use the master-slave mode where there is one master corresponding
to last horizontal and vertical tile that needs to be genlocked with
all other slave tiles.
This patch identifies saves the master transcoder in all the slave
CRTC states. This is needed to select the master CRTC/transcoder
while configuring transcoder port sync for the corresponding slaves.
v6:
Rebase (manasi)
v5:
* Address Ville's comments
* Just pass crtc_state, no need to check GEN (Ville)
v4:
* Rebase
v3:
* Use master_tramscoder instead of master_crtc for valid
HW state readouts (Ville)
v2:
* Move this to intel_mode_set_pipe_config(Jani N, Ville)
* Use slave_bitmask to save associated slaves in master crtc state (Ville)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-1-manasi.d.navare@intel.com
Commit 2d6f6f359f ("drm/i915: add i915_driver_modeset_remove()")
claimed removal of asymmetry in probe() and remove() calls, however, it
didn't take care of calling intel_irq_uninstall() on driver remove.
That doesn't hurt as long as we still call it from
intel_modeset_driver_remove() but in order to have full symmetry we
should call it again from i915_driver_modeset_remove().
Note that it's safe to call intel_irq_uninstall() twice thanks to
commit b318b82455 ("drm/i915: Nuke drm_driver irq vfuncs"). We may
only want to mention the case we are adding in a related FIXME comment
provided by that commit. While being at it, update the name of
function mentioned as calling it out of sequence as that name has been
changed meanwhile by commit 78dae1ac35 ("drm/i915: Propagate
"_remove" function name suffix down").
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/6250061.7lZMOAyebC@jkrzyszt-desk.ger.corp.intel.com
Extract drm_mode_hdmi_vic() to correctly calculate the final HDMI
VIC for us. Currently this is being done a bit differently between
the AVI and HDMI infoframes. Let's get both to agree on this.
We need to allow the case where a mode is both 3D and has a HDMI
VIC. Currently we'll just refuse to generate the HDMI infoframe when
we really should be setting HDMI VIC to 0 and instead enabling 3D
stereo signalling.
If the sink doesn't even support the HDMI infoframe we should
not be picking the HDMI VIC in favor of the CEA VIC, because then
we'll end up not sending either VIC in the end.
Cc: Wayne Lin <waynelin@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004141914.20600-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Extract the logic to compute the final CEA VIC to a small helper.
We'll reorder it a bit to make future modifications more
straightforward. No function changes.
Cc: Wayne Lin <waynelin@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004141914.20600-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
JasperLake PCH (JSP) has DDI HPD pin mappings similar to TGP and not
MCC. Also add the correct HPD pin mappings for the MCC PCH.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016183514.11128-1-vivek.kasireddy@intel.com
All the timeout values fit in u16, so let's shrink the structure
a bit.
This ends up actually increasing the .text size a bit due to
some changes in instructions (constant imul+small jmps replaced
with mov+bigger jmpqs). Seems pretty arbitrary to me so I'll
just pretend I didn't see it.
text data bss dec hex filename
- 34521 360 0 34881 8841 intel_hdmi.o
+ 34537 360 0 34897 8851 intel_hdmi.o
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010145127.7487-5-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
The only reason for the timeout2 value in the array is the
HDCP_2_2_AKE_SEND_HPRIME message. But that one still needs
special casing inside the loop, and so just ends up making
the code harder to read. Let's just remove this leaky
timeout2 abstraction and special case that one command
in a way that is easy to understand. We can then remove the
timeout2 member from struct entirely.
text data bss dec hex filename
- 34633 360 0 34993 88b1 intel_hdmi.o
+ 34521 360 0 34881 8841 intel_hdmi.o
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010145127.7487-4-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
The .read_2_2() hooks is never called for any of the message
types with a zero timeout. So it's all just dead weight which
we can chuck.
text data bss dec hex filename
- 34701 360 0 35061 88f5 intel_hdmi.o
+ 34633 360 0 34993 88b1 intel_hdmi.o
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010145127.7487-3-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Make the ways/sets arrays static cosnt u8 to shrink things a bit.
text data bss dec hex filename
- 23935 629 128 24692 6074 i915_drv.o
+ 23818 629 128 24575 5fff i915_drv.o
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010145127.7487-1-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
The 'realloc_pipes' bitmask is pointless. It is either:
a) the set of pipes which are already part of the state,
in which case adding them again is entirely redundant
b) the set of all pipes which we then add to the state
Also the fact that 'realloc_pipes' uses the crtc indexes is
going to bite is at some point so best get rid of it quick.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011200949.7839-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
changed==true just means we have some crtcs in the state. All the
stuff following this only operates on crtcs in the state anyway so
there is no point in having this bool.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011200949.7839-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
The DP port/pipe goes wonky if we try to use timings with
hdisplay==4096 on pre-HSW platforms. The link fails to train
and the pipe may not signal vblank interrupts. On HDMI such at
mode works just fine (tested on ELK/SNB/CHV). So let's refuse
such modes on DP on older platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718144340.1114-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Replace the hand rolled stuff with drm_encoder_mask() when populating
possible_clones, and rename the function to
intel_encoder_possible_clones() to make it clear what it's used for.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-1-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Unlike other planes the cursor currently handles 180 degree rotation
adjustment during the hardware programming phase. Let's move that
stuff into intel_cursor_check_surface() to match how we do things
with other plane types.
And while at we'll plop in the final src x/y coordinates (which will
actually always be zero) into the src rect and color_plane[0].x/y,
just for some extra consistency.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015152757.12231-1-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Remember to include the newly created mock engine in the list of
available engines inside the gt.
Fixes: a50134b198 ("drm/i915: Make for_each_engine_masked work on intel_gt")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018130703.31125-1-chris@chris-wilson.co.uk
Convert stolen memory over to a region object. Still leaves open the
question with what to do with pre-allocated objects...
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018090751.28295-3-matthew.auld@intel.com
Convert shmem to an intel_memory_region.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018090751.28295-2-matthew.auld@intel.com
Nothing to enumerate yet...
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018090751.28295-1-matthew.auld@intel.com
user space needs a flexiable query ability.
So that umd can get last signaled or submitted point.
v2:
add sanitizer checking.
v3:
rebase
Change-Id: I6512b430524ebabe715e602a2bf5abb0a7e780ea
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Christian König <Christian.Koenig@amd.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/series/64044/
Normally, we try and skip submission if ELSP[1] is filled. However, we
may desire to enable timeslicing due to the queue priority, even if
ELSP[1] itself does not require timeslicing. That is the queue is equal
priority to ELSP[0] and higher priority then ELSP[1]. Previously, we
would wait until the context switch to preempt the current ELSP[1], but
with timeslicing, we want to preempt ELSP[0] and replace it with the
queue.
In writing the test case, it become quickly apparent that we were also
suppressing the tasklet during promotion and so failing to notice when
the queue started requiring timeslicing.
Fixes: 2229adc813 ("drm/i915/execlist: Trim immediate timeslice expiry")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018072027.31948-1-chris@chris-wilson.co.uk
Make the following items static to avoid clashes with
other parts of the kernel (dev_attr_core_id) or just
silence the following sparse warning:
drivers/gpu/drm/arm/malidp_drv.c:371:24: warning: symbol 'malidp_fb_create' was not declared. Should it be static?
drivers/gpu/drm/arm/malidp_drv.c:494:6: warning: symbol 'malidp_error_stats_dump' was not declared. Should it be static?
drivers/gpu/drm/arm/malidp_drv.c:668:1: warning: symbol 'dev_attr_core_id' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017111756.12861-1-ben.dooks@codethink.co.uk
Where the function, or code segment, operates on intel_gt, we need to
start passing it instead of i915 to for_each_engine(_masked).
This is another partial step in migration of i915->engines[] to
gt->engines[].
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017094500.21831-2-tvrtko.ursulin@linux.intel.com
Medium term goal is to eliminate the i915->engine[] array and to get there
we have recently introduced equivalent array in intel_gt. Now we need to
migrate the code further towards this state.
This next step is to eliminate usage of i915->engines[] from the
for_each_engine_masked iterator.
For this to work we also need to use engine->id as index when populating
the gt->engine[] array and adjust the default engine set indexing to use
engine->legacy_idx instead of assuming gt->engines[] indexing.
v2:
* Populate gt->engine[] earlier.
* Check that we don't duplicate engine->legacy_idx
v3:
* Work around the initialization order issue between default_engines()
and intel_engines_driver_register() which sets engine->legacy_idx for
now. It will be fixed properly later.
v4:
* Merge with forgotten v2.5.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017161852.8836-1-tvrtko.ursulin@linux.intel.com
The locks (active.lock and rq->lock) need to be taken with disabled
interrupts. This is done in i915_request_retire() by disabling the
interrupts independently of the locks itself.
While local_irq_disable()+spin_lock() equals spin_lock_irq() on vanilla
it does not on PREEMPT_RT.
Chris Wilson confirmed that local_irq_disable() was just introduced as
an optimisation to avoid enabling/disabling interrupts during
lock/unlock combo.
Enable/disable interrupts as part of the locking instruction.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017161352.e5z3ugse7gxl5ari@linutronix.de
-ttm: A couple fixes related to lifetime and restore prefault behavior
(Christian & Thomas)
-panfrost: Fill in missing feature reg values and fix stoppedjob timeouts
(Steven)
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Steven Price <steven.price@arm.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHF6rntfJ3enn8gh8cywAJXLcr3kFAl2oz+4ACgkQcywAJXLc
r3msRAf+OoZdW8VQiDAFlussSOTix7cj5zf2rl41vz/JxgW1BpqBw1QZJfmNERE0
CfO4iRohu/KH7WOby/MJdfoE5uGnwfrOlyBSmZ21vep982Vakj32MSnDF1+SUHxr
+X6afxnLvcMh9Mue3doYTXP40Pu4evzd3lIWmVbNyf17hfWS/zl5ciOCR/AZwNxB
j4VwV2qoTXCidOaQHXZaEBm96bYNh9HQOXTnNQTDQHg5XpEiVFHHZzt7gQJlZ5ce
DJ//To5At0lFLlxDxUnrChtLcL0CFRRuN7k6DQDfRTAc+QF+qGtYtk5wVmWttl44
5vcb7PiSqvmhpsj8AGAnwbykjg8lHQ==
=Di3+
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2019-10-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
-dma-resv: Change shared_count to post-increment to fix lima crash (Qiang)
-ttm: A couple fixes related to lifetime and restore prefault behavior
(Christian & Thomas)
-panfrost: Fill in missing feature reg values and fix stoppedjob timeouts
(Steven)
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017203419.GA142909@art_vandelay
The request selftests straddle the boundary between checking the driver
and the hardware. They are subject to the quirks of the underlying HW,
but operate on top of the backend abstractions. The tests focus on the
scheduler elements and so should check for interactions of the scheduler
across all exposed engines.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016125236.17960-1-chris@chris-wilson.co.uk
drm-fixes-5.4-2019-10-16:
amdgpu:
- Powerplay fix for SMU7 parts
- Bail earlier when cik/si support is not set to 1
- Fix an SDMA issue on navi
radeon:
- revert a PPC fix which broken x86
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017022443.3853-1-alexander.deucher@amd.com
Better explain the usage of the microcontroller and what i915 is
responsible of. While at it, fix the documentation for the auth
function, which doesn't do any pinning anymore.
v2: add a comment on HuC being optional and descrive how HuC accesses
memory (Martin)
v3: add extra newline for better text organization (Martin)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Acked-by: Anna Karas <anna.karas@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014183602.3643-3-daniele.ceraolospurio@intel.com
Add a short description of what we expect from GuC and some minor
improvements to existing documentation. Also remove a comment about a
difference between GuC and HuC that is not true anymore.
v2: add that the GuC is not mandatory (Martin)
v3: add extra newline for better text organization (Martin)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Acked-by: Anna Karas <anna.karas@intel.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014183602.3643-2-daniele.ceraolospurio@intel.com
Do not need to maintain our own shmem memory management
code as drm_gem_shmem_helpers provides it. And we can
also benifit from the work of others with shared code.
This is also a preparation for implementing buffer madv.
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010140152.17747-2-yuq825@gmail.com
If DEM_QXL is y and DRM_TTM_HELPER is m, building fails:
drivers/gpu/drm/qxl/qxl_object.o: undefined reference to `drm_gem_ttm_print_info'
Select DRM_TTM_HELPER to fix this.
Fixes: 78d54f1f6a ("drm/qxl: use drm_gem_ttm_print_info")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20191008024054.32368-1-yuehaibing@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Not needed any more because we don't have vram specific fops
any more. DEFINE_DRM_GEM_FOPS() can be used instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20191016115203.20095-12-kraxel@redhat.com
Wire up the new drm_gem_ttm_mmap() helper function,
use generic drm_gem_mmap for &fops.mmap and
delete dead drm_vram_mm_file_operations_mmap().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20191016115203.20095-10-kraxel@redhat.com
Add helper function to mmap ttm bo's using &drm_gem_object_funcs.mmap().
Note that with this code path access verification is done by
drm_gem_mmap() (which calls drm_vma_node_is_allowed(()).
The &ttm_bo_driver.verify_access() callback is is not used.
v3: use ttm_bo_mmap_obj instead of ttm_bo_mmap_vma_setup
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20191016115203.20095-9-kraxel@redhat.com
Rename ttm_fbdev_mmap to ttm_bo_mmap_obj. Move the vm_pgoff sanity
check to amdgpu_bo_fbdev_mmap (only ttm_fbdev_mmap user in tree).
The ttm_bo_mmap_obj function can now be used to map any buffer object.
This allows to implement &drm_gem_object_funcs.mmap in gem ttm helpers.
v3: patch added to series
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20191016115203.20095-8-kraxel@redhat.com
Factor out ttm vma setup to a new function.
Reduces code duplication a bit.
v2: don't change vm_flags (moved to separate patch).
v4: make ttm_bo_mmap_vma_setup static.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20191016115203.20095-7-kraxel@redhat.com
Not obvious why this is needed. According to Deniel Vetter this is most
likely a historic artefact dating back to the days where drm drivers
exposed hardware registers as mmap'able gem objects, to avoid dumping
touching those registers. shmem gem objects surely don't need that ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20191016115203.20095-4-kraxel@redhat.com
Switch gem shmem helper to the new mmap() workflow,
from &gem_driver.fops.mmap to &drm_gem_object_funcs.mmap.
v2: Fix vm_flags and vm_page_prot handling.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20191016115203.20095-3-kraxel@redhat.com
drm_gem_object_funcs->vm_ops alone can't handle everything which needs
to be done for mmap(), tweaking vm_flags for example. So add a new
mmap() callback to drm_gem_object_funcs where this code can go to.
Note that the vm_ops field is not used in case the mmap callback is
present, it is expected that the callback sets vma->vm_ops instead.
Also setting vm_flags and vm_page_prot is the job of the new callback.
so drivers have more control over these flags.
drm_gem_mmap_obj() will use the new callback for object specific mmap
setup. With this in place the need for driver-speific fops->mmap
callbacks goes away, drm_gem_mmap can be hooked instead.
drm_gem_prime_mmap() will use the new callback too to just mmap gem
objects directly instead of jumping though loops to make
drm_gem_object_lookup() and fops->mmap work.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20191016115203.20095-2-kraxel@redhat.com
The MSA MISC computation now depends on the connector state, and
we do it from the DDI .pre_enable() hook. All that is fine for
DP SST but with MST we don't actually pass the connector state
to the dig port's .pre_enable() hook which leads to an oops.
Need to think more how to solve this in a cleaner fashion, but
for now let's just add a NULL check to stop the oopsing.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Fixes: 0c06fa1560 ("drm/i915/dp: Add support of BT.2020 Colorimetry to DP MSA")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015190538.27539-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
With discrete graphics system can have both integrated and discrete GPU
handled by i915.
Currently we use a fixed name ("i915") when registering as the uncore PMU
provider which stops working in this case.
To fix this we add the PCI device name string to non-integrated devices
handled by us. Integrated devices keep the legacy name preserving
backward compatibility.
v2:
* Detect IGP and keep legacy name. (Michal)
* Use PCI device name as suffix. (Michal, Chris)
v3:
* Constify the name. (Chris)
* Use pci_domain_nr. (Chris)
v4:
* Fix kfree_const usage. (Chris)
v5:
* kfree_const does not work for modules. (Chris)
* Changed is_igp helper to take i915.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016093802.12483-1-tvrtko.ursulin@linux.intel.com
The dependency has been changed from `PREEMPT' to `PREEMPTION'. Reflect
this change in the comment.
Use `PREEMPTION' in the comment.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015191821.11479-29-bigeasy@linutronix.de
The HW performs swizzling as part of its fence tiling inside the Global
GTT. We already do the probing of the HW settings from the GGTT setup,
complete the picture by storing the information as part of the GGTT. The
primary benefit is the consistency of our probe routines do not break
the i915_ggtt encapsulation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016143234.4075-2-chris@chris-wilson.co.uk
Now that i915_ggtt knows everything about its own paths to perform mmio,
we can use that as our primary backpointer for individual fence
registers. This reduces the amount of pointer dancing we have to perform
on the common paths, but more importantly finishes our fence register
encapsulation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016143234.4075-1-chris@chris-wilson.co.uk
Now that we record the default "goldenstate" context, we do not need to
emit the mocs registers at the start of each context and can simply do
mmio before the first context and capture the registers as part of its
default image. As a consequence, this means that we repeat the mmio
after each engine reset, fixing up any platform and registers that were
zapped by the reset (for those platforms with global not context-saved
settings).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111723
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111645
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Reviewed-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016090749.7092-1-chris@chris-wilson.co.uk
As preempt-to-busy leaves the request on the HW as the resubmission is
processed, that request may complete in the background and even cause a
second virtual request to enter queue. This second virtual request
breaks our "single request in the virtual pipeline" assumptions.
Furthermore, as the virtual request may be completed and retired, we
lose the reference the virtual engine assumes is held. Normally, just
removing the request from the scheduler queue removes it from the
engine, but the virtual engine keeps track of its singleton request via
its ve->request. This pointer needs protecting with a reference.
v2: Drop unnecessary motion of rq->engine = owner
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923152844.8914-1-chris@chris-wilson.co.uk
(cherry picked from commit b647c7df01)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The first come first served apporoach to handling the VBT
child device AUX ch conflicts has backfired. We have machines
in the wild where the VBT specifies both port A eDP and
port E DP (in that order) with port E being the real one.
So let's try to flip the preference around and let the last
child device win once again.
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Tested-by: Masami Ichikawa <masami256@gmail.com>
Tested-by: Torsten <freedesktop201910@liggy.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111966
Fixes: 36a0f92020 ("drm/i915/bios: make child device order the priority order")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011202030.8829-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 41e35ffb38)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pull setting -EIO on the hung requests into its own utility function.
Having allowed ourselves to short-circuit submission of completed
requests, we can now do the mark_eio() prior to submission and avoid
some redundant operations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-4-chris@chris-wilson.co.uk
(cherry picked from commit 0d7cf7bc15)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The Jasper Lake PCH follows ICP/TGP's south display behavior and is
identical to MCC graphics-wise except that it does not use the unusual
(port C -> TC1) pin mapping that MCC does.
Also, it turns out the extra PCH ID that we had previously thought was a
form of MCC is actually a second ID for JSP (i.e., port C uses the port
C pins instead of the TC1 pins).
v2:
- Also update the port masks (not just the pin table) in
mcc_hpd_irq_setup. (Vivek)
v3:
- Break jsp_hpd_irq_setup out into its own function for clarity.
(Vivek)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015162854.30546-1-matthew.d.roper@intel.com
Since EHL's MCC PCH reuses one of the TC pins we need to supply a TC
long detect function when handling the interrupts.
Fixes: 53448aed7b ("drm/i915/ehl: Port C's hotplug interrupt is associated with TC1 bits")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015161131.21239-1-matthew.d.roper@intel.com
Reviewed-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Once we do the hw vs. uapi split we can no longer use
drm_atomic_helper_calc_timestamping_constants() as it'll
consult the uapi state instead of the hw state.
So let's just update the vblank timestamping constants whenever
we update the scanline offset. We use both to convert the hw
scanline count to something which matches the software timing
values.
First I thought to put these into intel_crtc_vblank_on() but
we may want to get the scanline counter value before that (eg.
from some early tracepoints), so let's stick to updating them
a bit earlier than intel_crtc_vblank_on().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191007114943.29307-3-ville.syrjala@linux.intel.com
We perform timeslicing immediately upon receipt of a request that may be
put into the second ELSP slot. The idea behind this was that since we
didn't install the timer if the second ELSP slot was empty, we would not
have any idea of how long ELSP[0] had been running and so giving the
newcomer a chance on the GPU was fair. However, this causes us extra
busy work that we may be able to avoid if we wait a jiffie for the first
timeslice as normal.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191016100851.4979-1-chris@chris-wilson.co.uk
Sets output color format according to the connector formats and
display supported formats. Default value is RGB444 and only force
YUV format which must be YUV.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015091019.26021-1-lowry.li@arm.com
Set color_depth according to connector->bpc.
Changes since v1:
- Fixed min_bpc is effectively set but not used in
komeda_crtc_get_color_config().
Changes since v2:
- Align the code.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191012065030.12691-1-lowry.li@arm.com
Adds maximum line size check according to the AFBC decoder limitation
and special Line size limitation(2046) for format: YUV420_10BIT and X0L2.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924080022.19250-3-lowry.li@arm.com
On D71, we are using the global line size. From D32, every
component have a line size register to indicate the fifo size.
So this patch is to set line size support and do the line size
check.
Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190924080022.19250-2-lowry.li@arm.com
The vboxvideo driver's struct vram_framebuffer stores a DRM framebuffer
with an assiciated GEM object. This functionality is also provided by
generic code. Switch vboxvideo over.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011134808.3955-4-tzimmermann@suse.de
The vboxvideo driver provides struct drm_framebuffer_funcs.dirty_fb from
its own implementation. Switch over to drm_atomic_helper_dirty_fb() and
handle screen updates in the primary plane's atomic_update function.
With dirty_fb out of the way, we can further replace struct vbox_frammebuffer
with generic code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011134808.3955-3-tzimmermann@suse.de
The LVDS encoders on RZ/G2N SoC is similar to R-Car M3-N. Add support for
RZ/G2N (R8A774B1) SoC to the LVDS encoder driver.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add support for the R8A774B1 DU (which is very similar to the R8A77965 DU
except that it lacks TCON and CMM); it has one RGB output, one LVDS output
and one HDMI output.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Commit 5cca30ebe0 ("drm/rcar-du: Add LVDS_LANES quirk") states
that LVDS lanes 1 and 3 are inverted on R-Car H2 ES1 only, and that the
problem has been fixed in newer revisions.
However, the code didn't take into account the actual hardware revision,
thus applying the quirk also on newer hardware revisions, causing green
color reversals.
Fix this by applying the quirk when running on R-Car H2 ES1.x only.
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fixes: 5cca30ebe0 ("drm/rcar-du: Add LVDS_LANES quirk")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Expand comment in the 'vsps' parsing routine to specify the LIF
channel index defaults to 0 in case the second cell of the property
is not specified to remain compatible with older DT bindings.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To ensure correct state data for compute workloads, we
need to keep the ff dop clock enabled.
References: HSDES#1606700617
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-5-mika.kuoppala@linux.intel.com
In order to ensure constant caches are invalidated
properly with a0, we need extra hdc flush after invalidation.
v2: use IS_TGL_REVID (Chris)
References: HSDES#1604544889
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-4-mika.kuoppala@linux.intel.com
Add hdc pipeline flush to ensure memory state is coherent
in L3 when we are done.
v2: Flush also in breadcrumbs (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-3-mika.kuoppala@linux.intel.com
Aim for completeness and invalidate also the ro parts
in l3 cache. This might allow to get rid of the preparser
disable/enable workaround on invalidation path.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015154449.10338-2-mika.kuoppala@linux.intel.com
Panfrost uses multiple schedulers (one for each slot, so 2 in reality),
and on a timeout has to stop all the schedulers to safely perform a
reset. However more than one scheduler can trigger a timeout at the same
time. This race condition results in jobs being freed while they are
still in use.
When stopping other slots use cancel_delayed_work_sync() to ensure that
any timeout started for that slot has completed. Also use
mutex_trylock() to obtain reset_lock. This means that only one thread
attempts the reset, the other threads will simply complete without doing
anything (the first thread will wait for this in the call to
cancel_delayed_work_sync()).
While we're here and since the function is already dependent on
sched_job not being NULL, let's remove the unnecessary checks.
Fixes: aa20236784 ("drm/panfrost: Prevent concurrent resets")
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009094456.9704-1-steven.price@arm.com
If the system is being slow and userspace is racing ahead of the GPU and
finds itself waiting for the GPU to catch up, before the process sleeps
give the tasklet a kick, bypassing ksoftirqd. If the system is
overloaded, then ksoftirqd may be delayed incurring additional latency
to our user.
This should not be a frequent problem, but in the past we have observed
several hundred millisecond delays before ksoftirqd services an
interrupt, so burn a few cycles to lend a helping hand.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015132606.14349-1-chris@chris-wilson.co.uk
While not all platforms allow us to change the cdclk frequency
we should still verify that the fixed cdclk frequency isn't
too low. To that end let's cook up a .modeset_calc_cdclk()
implementation that only does the min_cdclk vs. actual cdclk
frequency check for such platforms.
Also we mustn't forget about double wide pipe on gen2/3 when
doing this.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708125325.16576-11-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
We need to insert stuff between the plane and crtc .atomic_check()
drm_atomic_helper_check_planes() doesn't allow us to do that so
stop using it and hand roll the loops instead.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708125325.16576-9-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
It attaches HDR metadata property to DP connector on GLK+.
It enables HDR metadata infoframe sdp on GLK+ to be used to send
HDR metadata to DP sink.
v2: Minor style fix
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-9-gwan-gyeong.mun@intel.com
Function intel_dp_setup_hdr_metadata_infoframe_sdp handles Infoframe SDP
header and data block setup for HDR Static Metadata. It enables writing of
HDR metadata infoframe SDP to panel. Support for HDR video was introduced
in DisplayPort 1.4. It implements the CTA-861-G standard for transport of
static HDR metadata. The HDR Metadata will be provided by userspace
compositors, based on blending policies and passed to the driver through
a blob property.
Because each of GEN11 and prior GEN11 have different register size for
HDR Metadata Infoframe SDP packet, it adds and uses different register
size.
Setup Infoframe SDP header and data block in function
intel_dp_setup_hdr_metadata_infoframe_sdp for HDR Static Metadata as per
dp 1.4 spec and CTA-861-F spec.
As per DP 1.4 spec, 2.2.2.5 SDP Formats. It enables Dynamic Range and
Mastering Infoframe for HDR content, which is defined in CTA-861-F spec.
According to DP 1.4 spec and CEA-861-F spec Table 5, in order to transmit
static HDR metadata, we have to use Non-audio INFOFRAME SDP v1.3.
+--------------------------------+-------------------------------+
| [ Packet Type Value ] | [ Packet Type ] |
+--------------------------------+-------------------------------+
| 80h + Non-audio INFOFRAME Type | CEA-861-F Non-audio INFOFRAME |
+--------------------------------+-------------------------------+
| [Transmission Timing] |
+----------------------------------------------------------------+
| As per CEA-861-F for INFOFRAME, including CEA-861.3 within |
| which Dynamic Range and Mastering INFOFRAME are defined |
+----------------------------------------------------------------+
v2: Add a missed blank line after function declaration.
v3: Remove not handled return values from
intel_dp_setup_hdr_metadata_infoframe_sdp(). [Uma]
v9: Addressed review comments from Ville.
- Add BUILD_BUG_ON to check a changing of struct dp_sdp size.
- Change a passed size toward write_infoframe() for DP infoframe sdp
packet for HDR static metadata.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-8-gwan-gyeong.mun@intel.com
According to Bspec, GEN11 and prior GEN11 have different register size for
HDR Metadata Infoframe SDP packet. It adds new VIDEO_DIP_GMP_DATA_SIZE for
GEN11. And it makes handle different register size for
HDMI_PACKET_TYPE_GAMUT_METADATA on hsw_dip_data_size() for each GEN
platforms. It addresses Uma's review comments.
v9: Add WARN_ON() when buffer size if larger than register size. [Ville]
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-7-gwan-gyeong.mun@intel.com
It attaches the colorspace connector property to a DisplayPort connector.
Based on colorspace change, modeset will be triggered to switch to a new
colorspace.
And in order to distinguish colorspace bwtween DP and HDMI connector, it
adds a handling of drm_mode_create_dp_colorspace_property() to
intel_attach_colorspace_property().
Based on colorspace property value create a VSC SDP packet with appropriate
colorspace. This would help to enable wider color gamut like BT2020 on a
sink device.
v9: Addressed review comments from Ville
- Add a handling of drm_mode_create_dp_colorspace_property() to
intel_attach_colorspace_property(). This hunk moved from the previous
commit.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-6-gwan-gyeong.mun@intel.com
When BT.2020 Colorimetry output is used for DP, we should program BT.2020
Colorimetry to MSA and VSC SDP. In order to handle colorspace of
drm_connector_state, it moves a calling of intel_ddi_set_pipe_settings()
function into intel_ddi_pre_enable_dp(). And it also rename
intel_ddi_set_pipe_settings() to intel_ddi_set_dp_msa().
As per DP 1.4a spec section 2.2.4 [MSA Data Transport]
The MSA data that the DP Source device transports for reproducing the main
video stream. Attribute data is sent once per frame during the main video
stream’s vertical blanking period.
In order to distinguish needed colorimetry for VSC SDP, it adds
intel_dp_needs_vsc_sdp function.
If the output colorspace requires vsc sdp or output format is YCbCr 4:2:0,
it uses MSA with VSC SDP.
As per DP 1.4a spec section 2.2.4.3 [MSA Field for Indication of
Color Encoding Format and Content Color Gamut] while sending
BT.2020 Colorimetry signals we should program MSA MISC1 fields which
indicate VSC SDP for the Pixel Encoding/Colorimetry Format.
v2: Remove useless parentheses
v3: Addressed review comments from Ville
- In order to checking output format and output colorspace on
intel_dp_needs_vsc_sdp(), it passes entire intel_crtc_state struct
value.
- Remove a pointless variable.
v9: Addressed review comments from Ville
- Remove a duplicated output color space from intel_crtc_state.
- In order to handle colorspace of drm_connector_state, it moves a
calling of intel_ddi_set_pipe_settings() function into
intel_ddi_pre_enable_dp().
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-3-gwan-gyeong.mun@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
It refactors and renames a function which handled vsc sdp header and data
block setup for supporting colorimetry format.
Function intel_dp_setup_vsc_sdp handles vsc sdp header and data block
setup for pixel encoding / colorimetry format.
In order to use colorspace information of a connector, it adds an argument
of drm_connector_state type.
Setup VSC header and data block in function intel_dp_setup_vsc_sdp for
pixel encoding / colorimetry format as per dp 1.4a spec, section 2.2.5.7.1,
table 2-119: VSC SDP Header Bytes, section 2.2.5.7.5,
table 2-120: VSC SDP Payload for DB16 through DB18.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919195311.13972-2-gwan-gyeong.mun@intel.com
There is no significance to our delay before clearing the semaphore the
engine is waiting on, so release it as soon as we acknowledge the CS
update following our preemption request. This should allow the GPU to
resume work earlier, if it was stuck on the semaphore at the end of a
request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015093204.25693-1-chris@chris-wilson.co.uk
We now do the page pin count upfront in vma_get_pages/vma_put_pages, so
that we do the allocations before we enter the vm->mutex. Our vma
page references we are tracked in vma->pages_count and the extra
obj->pages_pin_count being performed later in i915_vma_insert and
i915_vma_remove is redundant, and worse throws off the shrinker's logic
on when it can free an object by unbinding it.
Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reported-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015100155.10376-1-chris@chris-wilson.co.uk
Before we attempt to set_pages on the vma, we claim a
obj.pages_pin_count for it. If we subsequently fail to set the pages on
the vma, we need to drop our pinning before returning the error.
Reported-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015093915.3995-1-chris@chris-wilson.co.uk
