The SiFive errata code contains code checking applicable erratas
vs. actually applied erratas to suggest missing erratas to the
user when their Kconfig options are not enabled.
In the main kernel image one can be quite sure that all available
erratas appear at least once, so that check will succeed.
On the other hand modules can very well not use any errata-relevant
code, so the newly added module-alternative support may also patch
the module code, but not touch SiFive-specific erratas at all.
So to restore the original behaviour don't warn when patching
modules. This will keep the warning if necessary for the main kernel
image but prevent spurious warnings for modules.
Of course having such a vendor-specific warning may not be needed at
all, as CONFIG_ERRATA_SIFIVE is selected by CONFIG_SOC_SIFIVE and the
individual erratas are default-y so disabling them requires
deliberate action anyway. But for now just restore the old behaviour.
Fixes: a8e910168b ("riscv: implement module alternatives")
Reported-by: Ron Economos <re@w6rz.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ron Economos <re@w6rz.net>
Link: https://lore.kernel.org/r/20220608120849.1695191-1-heiko@sntech.de
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The mpfs has no cpu-map node, so tools like hwloc cannot correctly
parse the topology. Add the node using the existing node labels.
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Link: https://github.com/open-mpi/hwloc/issues/536
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
The initial PolarFire SoC devicetree must have been forked off from
the fu540 one prior to the addition of l2cache controller support being
added there. When the controller node was added to mpfs.dtsi, it was
not hooked up to the CPUs & thus sysfs reports an incorrect cache
configuration. Hook it up.
Fixes: 0fa6107eca ("RISC-V: Initial DTS for Microchip ICICLE board")
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
mm/page_table_check.c: In function `__page_table_check_pte_clear':
mm/page_table_check.c:148:6: error: implicit declaration of function `pte_user_accessible_page'; did you mean `user_access_save'? [-Werror=implicit-function-declaration]
if (pte_user_accessible_page(pte)) {
^~~~~~~~~~~~~~~~~~~~~~~~
user_access_save
ARCH_SUPPORTS_PAGE_TABLE_CHECK should only enabled with MMU.
Link: https://lkml.kernel.org/r/20220624085236.18544-1-yuehaibing@huawei.com
Fixes: 3fee229a8e ("riscv/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The majority of the Kconfig files use a single tab for basic indentation
and a single tab followed by two whitespaces for help text indentation.
Fix the lines that don't follow this convention.
While at it, add trailing comments to endif/endmenu statements for
better readability.
* 'riscv-kconfig_cleanups' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
riscv: Kconfig.socs: Add comments
riscv: Kconfig.erratas: Add comments
riscv: Kconfig: Fix indentation and add comments
The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.
While add it, add trailing comments to endmenu statements for better
readability.
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20220520120232.148310-2-juergh@canonical.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c
9c5de246c1 ("net: sparx5: mdb add/del handle non-sparx5 devices")
fbb89d02e3 ("net: sparx5: Allow mdb entries to both CPU and ports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Context tracking is going to be used not only to track user transitions
but also idle/IRQs/NMIs. The user tracking part will then become a
separate feature. Prepare Kconfig for that.
[ frederic: Apply Max Filippov feedback. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
context_tracking_user_enter() and context_tracking_user_exit() are
ASM callable versions of user_enter() and user_exit() for architectures
that didn't manage to check the context tracking static key from ASM.
Change those function names to better reflect their purpose.
[ frederic: Apply Max Filippov feedback. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Currently, the arch_efi_call_virt() assumes all users of it will have
defined a type 'efi_##f##_t' to make use of it.
Simplify the arch_efi_call_virt() macro by eliminating the explicit
need for efi_##f##_t type for every user of this macro.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[ardb: apply Sudeep's ARM fix to i686, Loongarch and RISC-V too]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
All architecture-independent users of virt_to_bus() and bus_to_virt()
have been fixed to use the dma mapping interfaces or have been
removed now. This means the definitions on most architectures, and the
CONFIG_VIRT_TO_BUS symbol are now obsolete and can be removed.
The only exceptions to this are a few network and scsi drivers for m68k
Amiga and VME machines and ppc32 Macintosh. These drivers work correctly
with the old interfaces and are probably not worth changing.
On alpha and parisc, virt_to_bus() were still used in asm/floppy.h.
alpha can use isa_virt_to_bus() like x86 does, and parisc can just
open-code the virt_to_phys() here, as this is architecture specific
code.
I tried updating the bus-virt-phys-mapping.rst documentation, which
started as an email from Linus to explain some details of the Linux-2.0
driver interfaces. The bits about virt_to_bus() were declared obsolete
backin 2000, and the rest is not all that relevant any more, so in the
end I just decided to remove the file completely.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmK28FETHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXdl9B/4h4emFRjxz0BuorLEPezEHbW3ULFES
CqPOgEOj7YalEqECOYrZLf4tmQQEbWcRrKIRmBp7vVLDfSwVtY7fsjUlh0rrbpDh
zXF3uCQDkm07Sy1upBbIXFCU7OBETSbtPKWF87YOcJVWpQbkwacPiokapAnnNy/J
21Sn4dyGADnYxis5QBTu7r5sCF3rxAOBJ+2SrdOeYQ+gdJYlWxPSGL4X+87fYkOE
3b5qR/8gzkGzDEG5PDnyiYgVCprUioE4WZiY7hKmcjGQBAy2q3NOgtz8m71PMI7v
IdDapf85SeLZbO96CXpJBokUthb2HefFMJv0FWwF3uHV93kWSp8ge+VY
=TWdX
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.20-20220625' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-06-25
this is a pull request of 22 patches for net-next/master.
The first 2 patches target the xilinx driver. Srinivas Neeli's patch
adds Transmitter Delay Compensation (TDC) support, a patch by me fixes
a typo.
The next patch is by me and fixes a typo in the m_can driver.
Another patch by me allows the configuration of fixed bit rates
without need for do_set_bittiming callback.
The following 7 patches are by Vincent Mailhol and refactor the
can-dev module and Kbuild, de-inline the can_dropped_invalid_skb()
function, which has grown over the time, and drop outgoing skbs if the
controller is in listen only mode.
Max Staudt's patch fixes a reference in the networking/can.rst
documentation.
Vincent Mailhol provides 2 patches with cleanups for the etas_es58x
driver.
Conor Dooley adds bindings for the mpfs-can to the PolarFire SoC dtsi.
Another patch by me allows the configuration of fixed data bit rates
without need for do_set_data_bittiming callback.
The last 5 patches are by Frank Jungclaus. They prepare the esd_usb
driver to add support for the the CAN-USB/3 device in a later series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* A fix to the T-Head memory type errata workaround that avoids behavior
that is unsupported in the LLVM assembler.
-----BEGIN PGP SIGNATURE-----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=QEm2
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
- fix the T-Head memory type errata workaround to avoid behavior
that is unsupported in the LLVM assembler
* tag 'riscv-for-linus-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix ALT_THEAD_PMA's asm parameters
Allow the capacity of the kvm_mmu_memory_cache struct to be chosen at
declaration time rather than being fixed for all declarations. This will
be used in a follow-up commit to declare an cache in x86 with a capacity
of 512+ objects without having to increase the capacity of all caches in
KVM.
This change requires each cache now specify its capacity at runtime,
since the cache struct itself no longer has a fixed capacity known at
compile time. To protect against someone accidentally defining a
kvm_mmu_memory_cache struct directly (without the extra storage), this
commit includes a WARN_ON() in kvm_mmu_topup_memory_cache().
In order to support different capacities, this commit changes the
objects pointer array to be dynamically allocated the first time the
cache is topped-up.
While here, opportunistically clean up the stack-allocated
kvm_mmu_memory_cache structs in riscv and arm64 to use designated
initializers.
No functional change intended.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-22-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of defaulting to patching NOP opcodes at init time, and leaving
it to the architectures to override this if this is not needed, switch
to a model where doing nothing is the default. This is the common case
by far, as only MIPS requires NOP patching at init time. On all other
architectures, the correct encodings are emitted by the compiler and so
no initial patching is needed.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220615154142.1574619-4-ardb@kernel.org
For RISC-V platforms we permit assigning addresses from 0 to PCI devices,
both in the memory and the I/O bus space, and we happily do so if there
is no conflict, e.g.:
pci 0000:07:00.0: BAR 0: assigned [io 0x0000-0x0007]
pci 0000:07:00.1: BAR 0: assigned [io 0x0008-0x000f]
pci 0000:06:01.0: PCI bridge to [bus 07]
pci 0000:06:01.0: bridge window [io 0x0000-0x0fff]
(with the SiFive HiFive Unmatched RISC-V board and a dual serial port
option card based on the OxSemi OXPCIe952 device wired for the legacy
UART mode).
Address 0 is treated specially however in many places, for example in
`pci_iomap_range' and `pci_iomap_wc_range' we require that the start
address is non-zero, and even if we let such an address through, then
individual device drivers could reject a request to handle a device at
such an address, such as in `uart_configure_port'. Consequently given
devices configured as shown above only one is actually usable:
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial 0000:07:00.0: enabling device (0000 -> 0001)
serial: probe of 0000:07:00.0 failed with error -12
serial 0000:07:00.1: enabling device (0000 -> 0001)
serial 0000:07:00.1: detected caps 00000700 should be 00000500
0000:07:00.1: ttyS0 at I/O 0x8 (irq = 39, base_baud = 15625000) is a 16C950/954
Therefore avoid handing out address 0, by bumping the lowest address
available to PCI via PCIBIOS_MIN_IO and PCIBIOS_MIN_MEM up by 4 and 16
respectively, which is the minimum allocation size for I/O and memory
BARs.
With this in place the system in question we have:
pci 0000:07:00.0: BAR 0: assigned [io 0x1000-0x1007]
pci 0000:07:00.1: BAR 0: assigned [io 0x1008-0x100f]
pci 0000:06:01.0: PCI bridge to [bus 07]
pci 0000:06:01.0: bridge window [io 0x1000-0x1fff]
and then devices work correctly:
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial 0000:07:00.0: enabling device (0000 -> 0001)
serial 0000:07:00.0: detected caps 00000700 should be 00000500
0000:07:00.0: ttyS0 at I/O 0x1000 (irq = 38, base_baud = 15625000) is a 16C950/954
serial 0000:07:00.1: enabling device (0000 -> 0001)
serial 0000:07:00.1: detected caps 00000700 should be 00000500
0000:07:00.1: ttyS1 at I/O 0x1008 (irq = 39, base_baud = 15625000) is a 16C950/954
Especially I/O space ranges are particularly valuable, because bridges
only decode bits from 12 up and consequently where 16-bit addressing is
in effect, as few as 16 separate ranges can be assigned to individual
buses only, however a generic change to avoid handing out address 0 only
has turned out controversial as per the discussion referred via the link
below.
Conversely sorting this out in platform code has been standard practice
since forever to avoid a clash with legacy devices subtractively decoded
by the southbridge where present. This can be revised should a generic
solution be adopted sometime.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2202260044180.25061@angie.orcam.me.uk
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-06-17
We've added 72 non-merge commits during the last 15 day(s) which contain
a total of 92 files changed, 4582 insertions(+), 834 deletions(-).
The main changes are:
1) Add 64 bit enum value support to BTF, from Yonghong Song.
2) Implement support for sleepable BPF uprobe programs, from Delyan Kratunov.
3) Add new BPF helpers to issue and check TCP SYN cookies without binding to a
socket especially useful in synproxy scenarios, from Maxim Mikityanskiy.
4) Fix libbpf's internal USDT address translation logic for shared libraries as
well as uprobe's symbol file offset calculation, from Andrii Nakryiko.
5) Extend libbpf to provide an API for textual representation of the various
map/prog/attach/link types and use it in bpftool, from Daniel Müller.
6) Provide BTF line info for RV64 and RV32 JITs, and fix a put_user bug in the
core seen in 32 bit when storing BPF function addresses, from Pu Lehui.
7) Fix libbpf's BTF pointer size guessing by adding a list of various aliases
for 'long' types, from Douglas Raillard.
8) Fix bpftool to readd setting rlimit since probing for memcg-based accounting
has been unreliable and caused a regression on COS, from Quentin Monnet.
9) Fix UAF in BPF cgroup's effective program computation triggered upon BPF link
detachment, from Tadeusz Struk.
10) Fix bpftool build bootstrapping during cross compilation which was pointing
to the wrong AR process, from Shahab Vahedi.
11) Fix logic bug in libbpf's is_pow_of_2 implementation, from Yuze Chi.
12) BPF hash map optimization to avoid grabbing spinlocks of all CPUs when there
is no free element. Also add a benchmark as reproducer, from Feng Zhou.
13) Fix bpftool's codegen to bail out when there's no BTF, from Michael Mullin.
14) Various minor cleanup and improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
bpf: Fix bpf_skc_lookup comment wrt. return type
bpf: Fix non-static bpf_func_proto struct definitions
selftests/bpf: Don't force lld on non-x86 architectures
selftests/bpf: Add selftests for raw syncookie helpers in TC mode
bpf: Allow the new syncookie helpers to work with SKBs
selftests/bpf: Add selftests for raw syncookie helpers
bpf: Add helpers to issue and check SYN cookies in XDP
bpf: Allow helpers to accept pointers with a fixed size
bpf: Fix documentation of th_len in bpf_tcp_{gen,check}_syncookie
selftests/bpf: add tests for sleepable (uk)probes
libbpf: add support for sleepable uprobe programs
bpf: allow sleepable uprobe programs to attach
bpf: implement sleepable uprobes by chaining gps
bpf: move bpf_prog to bpf.h
libbpf: Fix internal USDT address translation logic for shared libraries
samples/bpf: Check detach prog exist or not in xdp_fwd
selftests/bpf: Avoid skipping certain subtests
selftests/bpf: Fix test_varlen verification failure with latest llvm
bpftool: Do not check return value from libbpf_set_strict_mode()
Revert "bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK"
...
====================
Link: https://lore.kernel.org/r/20220617220836.7373-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* A fix for the PolarFire SOC's device tree.
* A handful of fixes for the recently added Svpmbt support.
* An improvement to the Kconfig text for Svpbmt.
-----BEGIN PGP SIGNATURE-----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=wL7+
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for the PolarFire SOC's device tree
- A handful of fixes for the recently added Svpmbt support
- An improvement to the Kconfig text for Svpbmt
* tag 'riscv-for-linus-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Improve description for RISCV_ISA_SVPBMT Kconfig symbol
riscv: drop cpufeature_apply_feature tracking variable
riscv: fix dependency for t-head errata
riscv: dts: microchip: re-add pdma to mpfs device tree
After commit a35707c3d8 ("riscv: add memory-type errata for T-Head"),
builds with LLVM's integrated assembler fail like:
In file included from arch/riscv/kernel/asm-offsets.c:10:
In file included from ./include/linux/mm.h:29:
In file included from ./include/linux/pgtable.h:6:
In file included from ./arch/riscv/include/asm/pgtable.h:114:
./arch/riscv/include/asm/pgtable-64.h:210:2: error: invalid input constraint '0' in asm
ALT_THEAD_PMA(prot_val);
^
./arch/riscv/include/asm/errata_list.h:88:4: note: expanded from macro 'ALT_THEAD_PMA'
: "0"(_val), \
^
This was reported upstream to LLVM where Jessica pointed out a couple of
issues with the existing implementation of ALT_THEAD_PMA:
* t3 is modified but not listed in the clobbers list.
* "+r"(_val) marks _val as both an input and output of the asm but then
"0"(_val) marks _val as an input matching constraint, which does not
make much sense in this situation, as %1 is not actually used in the
asm and matching constraints are designed to be used for different
inputs that need to use the same register.
Drop the matching contraint and shift all the operands by one, as %1 is
unused, and mark t3 as clobbered. This resolves the build error and goes
not cause any problems with GNU as.
Fixes: a35707c3d8 ("riscv: add memory-type errata for T-Head")
Link: https://github.com/ClangBuiltLinux/linux/issues/1641
Link: https://github.com/llvm/llvm-project/issues/55514
Link: https://gcc.gnu.org/onlinedocs/gcc/Simple-Constraints.html
Suggested-by: Jessica Clarke <jrtc27@jrtc27.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220518184529.454008-1-nathan@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
I observed that for each of the shared file-backed page faults, we're very
likely to retry one more time for the 1st write fault upon no page. It's
because we'll need to release the mmap lock for dirty rate limit purpose
with balance_dirty_pages_ratelimited() (in fault_dirty_shared_page()).
Then after that throttling we return VM_FAULT_RETRY.
We did that probably because VM_FAULT_RETRY is the only way we can return
to the fault handler at that time telling it we've released the mmap lock.
However that's not ideal because it's very likely the fault does not need
to be retried at all since the pgtable was well installed before the
throttling, so the next continuous fault (including taking mmap read lock,
walk the pgtable, etc.) could be in most cases unnecessary.
It's not only slowing down page faults for shared file-backed, but also add
more mmap lock contention which is in most cases not needed at all.
To observe this, one could try to write to some shmem page and look at
"pgfault" value in /proc/vmstat, then we should expect 2 counts for each
shmem write simply because we retried, and vm event "pgfault" will capture
that.
To make it more efficient, add a new VM_FAULT_COMPLETED return code just to
show that we've completed the whole fault and released the lock. It's also
a hint that we should very possibly not need another fault immediately on
this page because we've just completed it.
This patch provides a ~12% perf boost on my aarch64 test VM with a simple
program sequentially dirtying 400MB shmem file being mmap()ed and these are
the time it needs:
Before: 650.980 ms (+-1.94%)
After: 569.396 ms (+-1.38%)
I believe it could help more than that.
We need some special care on GUP and the s390 pgfault handler (for gmap
code before returning from pgfault), the rest changes in the page fault
handlers should be relatively straightforward.
Another thing to mention is that mm_account_fault() does take this new
fault as a generic fault to be accounted, unlike VM_FAULT_RETRY.
I explicitly didn't touch hmm_vma_fault() and break_ksm() because they do
not handle VM_FAULT_RETRY even with existing code, so I'm literally keeping
them as-is.
Link: https://lkml.kernel.org/r/20220530183450.42886-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm part]
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Will Deacon <will@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Chris Zankel <chris@zankel.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some additionals comments and notes from autobuilders received after the
series got applied, warranted some changes.
* 'riscv-svpbmt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
riscv: remove usage of function-pointers from cpufeatures and t-head errata
riscv: make patch-function pointer more generic in cpu_manufacturer_info struct
riscv: Improve description for RISCV_ISA_SVPBMT Kconfig symbol
riscv: drop cpufeature_apply_feature tracking variable
riscv: fix dependency for t-head errata
Some additionals comments and notes from autobuilders received after the
series got applied, warranted some changes.
* commit '924cbb8cbe3460ea192e6243017ceb0ceb255b1b':
riscv: Improve description for RISCV_ISA_SVPBMT Kconfig symbol
riscv: drop cpufeature_apply_feature tracking variable
riscv: fix dependency for t-head errata
Having a list of alternatives to check with a per-entry function pointer
to a check function is nice style-wise. But in case of early-alternatives
it can clash with the non-relocated kernel and the function pointer in
the list pointing to a completely wrong location.
This isn't an issue with one or two list entries, as in that case the
compiler seems to unroll the loop and even usage of the list structure
and then only does relative jumps into the check functions based on this.
When adding a third entry to either list though, the issue that was
hiding there from the beginning is triggered resulting a jump to a
memory address that isn't part of the kernel at all.
The list of features/erratas only contained an unused name and the
pointer to the check function, so an easy solution for the problem
is to just unroll the loop in code, dismantle the whole list structure
and just call the relevant check functions one by one ourself.
For the T-Head errata this includes moving the stage-check inside
the check functions.
The issue is only relevant for things that might be called for early-
alternatives (T-Head and possible future main extensions), so the
SiFive erratas were not affected from the beginning, as they got
an early return for early-alternatives in the original patchset.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220526205646.258337-6-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
During review the naming of the function-pointer was called
confusing as the vendor id is just one of three inputs for
the patching and indeed it serves no real purpose, as with
recent changes the function pointer is not a static
global element anymore, so drop the "vendor_" prefix.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220526205646.258337-4-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This improves the symbol's description to make it easier for
people to understand what it is about.
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220526205646.258337-3-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The variable was tracking which feature patches got applied
but that information was never actually used - and thus resulted
in a warning as well.
Drop the variable.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220526205646.258337-2-heiko@sntech.de
Fixes: ff689fd21c ("riscv: add RISC-V Svpbmt extension support")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
alternatives only work correctly on non-xip-kernels and while the
selected alternative-symbol has the correct dependency the symbol
selecting it also needs that dependency.
So add the missing dependency to the T-Head errata Kconfig symbol.
Reported-by: kernel test robot <yujie.liu@intel.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220526205646.258337-5-heiko@sntech.de
Fixes: a35707c3d8 ("riscv: add memory-type errata for T-Head")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This is to use the unified static key mechanism instead of putting
static key related here and there.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20220522153543.2656-3-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, riscv has several extensions which may not be supported on
all riscv platforms, for example, FPU and so on. To support unified
kernel Image style, we need to check whether the feature is supported
or not. If the check sits at hot code path, then performance will be
impacted a lot. static key can be used to solve the issue. In the past,
FPU support has been converted to use static key mechanism. I believe
we will have similar cases in the future.
This patch tries to add an unified mechanism to use static keys for
some ISA extensions by implementing an array of default-false static keys
and enabling them when detected.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20220522153543.2656-2-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Remove the spi-max-frequency property from the spi0 controller
node as it is supposed to be a per SPI peripheral device property.
Reported-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/lkml/20220526014141.2872567-1-robh@kernel.org/
Signed-off-by: Nagasuresh Relli <nagasuresh.relli@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
PolarFire SoC has a pair of CAN controllers, but as they were
undocumented there were omitted from the device tree. Add them.
Link: https://lore.kernel.org/all/20220607065459.2035746-3-conor.dooley@microchip.com
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
PolarFire SoC /does/ have a SiFive pdma, despite what I suggested as a
conflict resolution to Zong. Somehow the entry fell through the cracks
between versions of my dt patches, so re-add it with Zong's updated
compatible & dma-channels property.
Fixes: c5094f3710 ("riscv: dts: microchip: refactor icicle kit device tree")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Anup Patel <anup@brainfault.org>
spi-max-frequency property is supposed to be a per SPI peripheral device
property, not a SPI controller property, so remove it.
Reported-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/lkml/20220526014141.2872567-1-robh@kernel.org/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
This series includes the following patchsets:
- bitmap: optimize bitmap_weight() usage(w/o bitmap_weight_cmp), from me;
- lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro
Carvalho Chehab;
- include/linux/find: Fix documentation, from Anna-Maria Behnsen;
- bitmap: fix conversion from/to fix-sized arrays, from me;
- bitmap: Fix return values to be unsigned, from Kees Cook.
It has been in linux-next for at least a week with no problems.
-----BEGIN PGP SIGNATURE-----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=U7DN
-----END PGP SIGNATURE-----
Merge tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- bitmap: optimize bitmap_weight() usage, from me
- lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro
Carvalho Chehab
- include/linux/find: Fix documentation, from Anna-Maria Behnsen
- bitmap: fix conversion from/to fix-sized arrays, from me
- bitmap: Fix return values to be unsigned, from Kees Cook
It has been in linux-next for at least a week with no problems.
* tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits)
nodemask: Fix return values to be unsigned
bitmap: Fix return values to be unsigned
KVM: x86: hyper-v: replace bitmap_weight() with hweight64()
KVM: x86: hyper-v: fix type of valid_bank_mask
ia64: cleanup remove_siblinginfo()
drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate
KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate
lib/bitmap: add test for bitmap_{from,to}_arr64
lib: add bitmap_{from,to}_arr64
lib/bitmap: extend comment for bitmap_(from,to)_arr32()
include/linux/find: Fix documentation
lib/bitmap.c make bitmap_print_bitmask_to_buf parseable
MAINTAINERS: add cpumask and nodemask files to BITMAP_API
arch/x86: replace nodes_weight with nodes_empty where appropriate
mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate
clocksource: replace cpumask_weight with cpumask_empty in clocksource.c
genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate
irq: mips: replace cpumask_weight with cpumask_empty where appropriate
drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate
arch/x86: replace cpumask_weight with cpumask_empty where appropriate
...
ordinary user mode tasks.
In commit 40966e316f ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
The commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple enough
to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code sitting
in linux-next.
Link: https://lkml.kernel.org/r/87mtfu4up3.fsf@email.froward.int.ebiederm.org
Eric W. Biederman (8):
kthread: Don't allocate kthread_struct for init and umh
fork: Pass struct kernel_clone_args into copy_thread
fork: Explicity test for idle tasks in copy_thread
fork: Generalize PF_IO_WORKER handling
init: Deal with the init process being a user mode process
fork: Explicitly set PF_KTHREAD
fork: Stop allowing kthreads to call execve
sched: Update task_tick_numa to ignore tasks without an mm
arch/alpha/kernel/process.c | 13 ++++++------
arch/arc/kernel/process.c | 13 ++++++------
arch/arm/kernel/process.c | 12 ++++++-----
arch/arm64/kernel/process.c | 12 ++++++-----
arch/csky/kernel/process.c | 15 ++++++-------
arch/h8300/kernel/process.c | 10 ++++-----
arch/hexagon/kernel/process.c | 12 ++++++-----
arch/ia64/kernel/process.c | 15 +++++++------
arch/m68k/kernel/process.c | 12 ++++++-----
arch/microblaze/kernel/process.c | 12 ++++++-----
arch/mips/kernel/process.c | 13 ++++++------
arch/nios2/kernel/process.c | 12 ++++++-----
arch/openrisc/kernel/process.c | 12 ++++++-----
arch/parisc/kernel/process.c | 18 +++++++++-------
arch/powerpc/kernel/process.c | 15 +++++++------
arch/riscv/kernel/process.c | 12 ++++++-----
arch/s390/kernel/process.c | 12 ++++++-----
arch/sh/kernel/process_32.c | 12 ++++++-----
arch/sparc/kernel/process_32.c | 12 ++++++-----
arch/sparc/kernel/process_64.c | 12 ++++++-----
arch/um/kernel/process.c | 15 +++++++------
arch/x86/include/asm/fpu/sched.h | 2 +-
arch/x86/include/asm/switch_to.h | 8 +++----
arch/x86/kernel/fpu/core.c | 4 ++--
arch/x86/kernel/process.c | 18 +++++++++-------
arch/xtensa/kernel/process.c | 17 ++++++++-------
fs/exec.c | 8 ++++---
include/linux/sched/task.h | 8 +++++--
init/initramfs.c | 2 ++
init/main.c | 2 +-
kernel/fork.c | 46 +++++++++++++++++++++++++++++++++-------
kernel/sched/fair.c | 2 +-
kernel/umh.c | 6 +++---
33 files changed, 234 insertions(+), 160 deletions(-)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=x6fy
-----END PGP SIGNATURE-----
Merge tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull kthread updates from Eric Biederman:
"This updates init and user mode helper tasks to be ordinary user mode
tasks.
Commit 40966e316f ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
Here, commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple
enough to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace
thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code
sitting in linux-next"
* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched: Update task_tick_numa to ignore tasks without an mm
fork: Stop allowing kthreads to call execve
fork: Explicitly set PF_KTHREAD
init: Deal with the init process being a user mode process
fork: Generalize PF_IO_WORKER handling
fork: Explicity test for idle tasks in copy_thread
fork: Pass struct kernel_clone_args into copy_thread
kthread: Don't allocate kthread_struct for init and umh
This is mostly some DT updates, but also a handful of cleanups and some
fixes. The most user-visible of those are:
* A device tree for the Sundance Polarberry, along with a handful of
fixes and clenups to the PolarFire SOC device trees and bindings.
* The memfd_secret syscall number is now visible to userspace,
* Some improvements to the vm layout dump, which really should have
followed shortly after the sv48 patches but I missed.
-----BEGIN PGP SIGNATURE-----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=qpf3
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.19-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
"This is mostly some DT updates, but also a handful of cleanups and
some fixes. The most user-visible of those are:
- A device tree for the Sundance Polarberry, along with a handful of
fixes and clenups to the PolarFire SOC device trees and bindings.
- The memfd_secret syscall number is now visible to userspace,
- Some improvements to the vm layout dump, which really should have
followed shortly after the sv48 patches but I missed"
* tag 'riscv-for-linus-5.19-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Move alternative length validation into subsection
riscv: mm: init: make pt_ops_set_[early|late|fixmap] static
riscv: move errata/ and kvm/ builds to arch/riscv/Kbuild
RISC-V: Mark IORESOURCE_EXCLUSIVE for reserved mem instead of IORESOURCE_BUSY
riscv: Wire up memfd_secret in UAPI header
riscv: Fix irq_work when SMP is disabled
riscv: Improve virtual kernel memory layout dump
riscv: Initialize thread pointer before calling C functions
Documentation: riscv: Add sv48 description to VM layout
RISC-V: Only default to spinwait on SBI-0.1 and M-mode
riscv: dts: icicle: sort nodes alphabetically
riscv: microchip: icicle: readability fixes
riscv: dts: microchip: add the sundance polarberry
dt-bindings: riscv: microchip: add polarberry compatible string
dt-bindings: vendor-prefixes: add Sundance DSP
riscv: dts: microchip: make the fabric dtsi board specific
dt-bindings: riscv: microchip: document icicle reference design
riscv: dts: microchip: remove soc vendor from filenames
riscv: dts: microchip: move sysctrlr out of soc bus
riscv: dts: microchip: remove icicle memory clocks
- fix new DXE service invocations for mixed mode
- use correct Kconfig symbol when setting PE header flag
- clean up the drivers/firmware/efi Kconfig dependencies so that
features that depend on CONFIG_EFI are hidden from the UI when the
symbol is not enabled.
Also included is a RISC-V bugfix from Heinrich to avoid read-write
mappings of read-only firmware regions in the EFI page tables.
-----BEGIN PGP SIGNATURE-----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=7wiT
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull more EFI updates from Ard Biesheuvel:
"Follow-up tweaks for EFI changes - they mostly address issues
introduced this merge window, except for Heinrich's patch:
- fix new DXE service invocations for mixed mode
- use correct Kconfig symbol when setting PE header flag
- clean up the drivers/firmware/efi Kconfig dependencies so that
features that depend on CONFIG_EFI are hidden from the UI when the
symbol is not enabled.
Also included is a RISC-V bugfix from Heinrich to avoid read-write
mappings of read-only firmware regions in the EFI page tables"
* tag 'efi-next-for-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: clean up Kconfig dependencies on CONFIG_EFI
efi/x86: libstub: Make DXE calls mixed mode safe
efi: x86: Fix config name for setting the NX-compatibility flag in the PE header
riscv: read-only pages should not be writable
bitmap_empty() is better than bitmap_weight() because it may return
earlier, and improves on readability.
CC: Albert Ou <aou@eecs.berkeley.edu>
CC: Anup Patel <anup@brainfault.org>
CC: Atish Patra <atishp@atishpatra.org>
CC: Jisheng Zhang <jszhang@kernel.org>
CC: Palmer Dabbelt <palmer@dabbelt.com>
CC: Paul Walmsley <paul.walmsley@sifive.com>
CC: Tsukasa OI <research_trasio@irq.a4lg.com>
CC: linux-riscv@lists.infradead.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add support for riscv jit to provide bpf_line_info. We need to
consider the prologue offset in ctx->offset, but unlike x86 and
arm64, ctx->offset of riscv does not provide an extra slot for
the prologue, so here we just calculate the len of prologue and
add it to ctx->offset at the end. Both RV64 and RV32 have been
tested.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220530092815.1112406-3-pulehui@huawei.com
After commit 49b290e430 ("riscv: prevent compressed instructions in
alternatives"), builds with LLVM's integrated assembler fail:
In file included from arch/riscv/mm/init.c:10:
In file included from ./include/linux/mm.h:29:
In file included from ./include/linux/pgtable.h:6:
In file included from ./arch/riscv/include/asm/pgtable.h:108:
./arch/riscv/include/asm/tlbflush.h:23:2: error: expected assembly-time absolute expression
ALT_FLUSH_TLB_PAGE(__asm__ __volatile__ ("sfence.vma %0" : : "r" (addr) : "memory"));
^
./arch/riscv/include/asm/errata_list.h:33:5: note: expanded from macro 'ALT_FLUSH_TLB_PAGE'
asm(ALTERNATIVE("sfence.vma %0", "sfence.vma", SIFIVE_VENDOR_ID, \
^
./arch/riscv/include/asm/alternative-macros.h:187:2: note: expanded from macro 'ALTERNATIVE'
_ALTERNATIVE_CFG(old_content, new_content, vendor_id, errata_id, CONFIG_k)
^
./arch/riscv/include/asm/alternative-macros.h:113:2: note: expanded from macro '_ALTERNATIVE_CFG'
__ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, IS_ENABLED(CONFIG_k))
^
./arch/riscv/include/asm/alternative-macros.h:110:2: note: expanded from macro '__ALTERNATIVE_CFG'
ALT_NEW_CONTENT(vendor_id, errata_id, enable, new_c)
^
./arch/riscv/include/asm/alternative-macros.h:99:3: note: expanded from macro 'ALT_NEW_CONTENT'
".org . - (889b - 888b) + (887b - 886b)\n" \
^
<inline asm>:26:6: note: instantiated into assembly here
.org . - (889b - 888b) + (887b - 886b)
^
This error happens because LLVM's integrated assembler has a one-pass
design, which means it cannot figure out the instruction lengths when
the .org directive is outside of the subsection that contains the
instructions, which was changed by the .option directives added by the
above change.
Move the .org directives before the .previous directive so that these
directives are always within the same subsection, which resolves the
failures and does not introduce any new issues with GNU as. This was
done for arm64 in commit 966a0acce2 ("arm64/alternatives: move length
validation inside the subsection") and commit 22315a2296 ("arm64:
alternatives: Move length validation in alternative_{insn, endif}").
While there is no error from the assembly versions of the macro, they
appear to have the same problem so just make the same change there as
well so that there are no problems in the future.
Link: https://github.com/ClangBuiltLinux/linux/issues/1640
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220516214520.3252074-1-nathan@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
These three functions are only used in init.c, so make them static.
Fix W=1 warnings like below:
arch/riscv/mm/init.c:721:13: warning: no previous prototype for function
'pt_ops_set_early' [-Wmissing-prototypes]
void __init pt_ops_set_early(void)
^
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220516143204.2603-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Move the __ARCH_WANT_MEMFD_SECRET define added in commit 7bb7f2ac24
("arch, mm: wire up memfd_secret system call where relevant") to
<uapi/asm/unistd.h> so __NR_memfd_secret is defined when including
<unistd.h> in userspace.
This allows the memfd_secret selftest to pass on riscv.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20220505081815.22808-1-tklauser@distanz.ch
Fixes: 7bb7f2ac24 ("arch, mm: wire up memfd_secret system call where relevant")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
irq_work is triggered via an IPI, but the IPI infrastructure is not
included in uniprocessor kernels. As a result, irq_work never runs.
Fall back to the tick-based irq_work implementation on uniprocessor
configurations.
Fixes: 298447928b ("riscv: Support irq_work via self IPIs")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220430030025.58405-1-samuel@sholland.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
With the arrival of sv48 and its large address space, it would be
cumbersome to statically define the unit size to use to print the different
portions of the virtual memory layout: instead, determine it dynamically.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Because of the stack canary feature that reads from the current task
structure the stack canary value, the thread pointer register "tp" must
be set before calling any C function from head.S: by chance, setup_vm
and all the functions that it calls does not seem to be part of the
functions where the canary check is done, but in the following commits,
some functions will.
Fixes: f2c9699f65 ("riscv: Add STACKPROTECTOR supported")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The spinwait boot method has been superseded by the SBI HSM extension
for some time now, but it still enabled by default. This causes some
issues on large hart count systems, which will hang if a physical hart
exists that is larger than NR_CPUS.
Users on modern SBI implementation don't need spinwait, and while it's
probably possible to deal with some of the spinwait issues let's just
restrict the default to systems that are likely to actually use it.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20220421170354.10555-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The icicle device tree is in a "random" order, so clean it up and sort
its elements alphabetically to match the newly added PolarBerry dts.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220509142610.128590-11-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Fix the sort order of the status properties, remove some
extra whitespace in the mmc entry & add whitespace to the mac entry
containing the phys so that the dt is easier to read.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220509142610.128590-10-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently mpfs-fabric.dtsi is included by mpfs.dtsi - which is fine
currently since there is only one board with this SoC upstream.
However if another board was added, it would include the fabric contents
of the Icicle Kit's reference design. To avoid this, rename
mpfs-fabric.dtsi to mpfs-icicle-kit-fabric.dtsi & include it in the dts
rather than mpfs.dtsi.
mpfs-icicle-kit-fabric.dtsi specifically matches the 22.03 reference
design for the icicle kit's FPGA fabric & an older version of the
design may not have the i2c or pwm devices - so add the compatible
string to document this.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-6-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Having the SoC vendor both as the directory and in the filename adds
little. Remove microchip from the filenames so that the files will
resemble the other directories in riscv (and arm64). The new names
follow a soc-board.dts & soc{,-fabric}.dtsi pattern.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-4-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The MPFS system controller has no registers of its own, so move it out
of the soc node to avoid dtbs_check warnings:
arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dtb: soc: syscontroller: {'compatible': ['microchip,mpfs-sys-controller'], 'mboxes': [[15, 0]], 'status': ['okay']} should not be valid under {'type': 'object'}
Reported-by: Palmer Dabbelt <palmer@rivosinc.com>
Suggested-by: Rob Herring <robh@kernel.org>
Fixes: 528a5b1f25 ("riscv: dts: microchip: add new peripherals to icicle kit device tree")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-3-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The clock properties in the icicle kit's memory entries cause dtbs_check
errors:
arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dtb: /: memory@80000000: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
Get rid of the clocks to avoid the errors.
Reported-by: Palmer Dabbelt <palmer@rivosinc.com>
Fixes: 0fa6107eca ("RISC-V: Initial DTS for Microchip ICICLE board")
Fixes: 5b28df37d3 ("riscv: dts: microchip: update peripherals in icicle kit device tree")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-2-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Support for the Svpbmt extension, which allows memory attributes to be
encoded in pages.
* Support for the Allwinner D1's implementation of page-based memory
attributes.
* Support for running rv32 binaries on rv64 systems, via the compat
subsystem.
* Support for kexec_file().
* Support for the new generic ticket-based spinlocks, which allows us to
also move to qrwlock. These should have already gone in through the
asm-geneic tree as well.
* A handful of cleanups and fixes, include some larger ones around
atomics and XIP.
-----BEGIN PGP SIGNATURE-----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=Loi6
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the Svpbmt extension, which allows memory attributes to
be encoded in pages
- Support for the Allwinner D1's implementation of page-based memory
attributes
- Support for running rv32 binaries on rv64 systems, via the compat
subsystem
- Support for kexec_file()
- Support for the new generic ticket-based spinlocks, which allows us
to also move to qrwlock. These should have already gone in through
the asm-geneic tree as well
- A handful of cleanups and fixes, include some larger ones around
atomics and XIP
* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
riscv: compat: Using seperated vdso_maps for compat_vdso_info
RISC-V: Fix the XIP build
RISC-V: Split out the XIP fixups into their own file
RISC-V: ignore xipImage
RISC-V: Avoid empty create_*_mapping definitions
riscv: Don't output a bogus mmu-type on a no MMU kernel
riscv: atomic: Add custom conditional atomic operation implementation
riscv: atomic: Optimize dec_if_positive functions
riscv: atomic: Cleanup unnecessary definition
RISC-V: Load purgatory in kexec_file
RISC-V: Add purgatory
RISC-V: Support for kexec_file on panic
RISC-V: Add kexec_file support
RISC-V: use memcpy for kexec_file mode
kexec_file: Fix kexec_file.c build error for riscv platform
riscv: compat: Add COMPAT Kbuild skeletal support
riscv: compat: ptrace: Add compat_arch_ptrace implement
riscv: compat: signal: Add rt_frame implementation
riscv: add memory-type errata for T-Head
...
Without this change arch/riscv/kernel/elf_kexec.c fails to compile once
commit 233c1e6c319c ("kexec_file: drop weak attribute from
arch_kexec_apply_relocations[_add]") is also contained in the tree.
This currently happens in next-20220527.
Prepare the RISC-V similar to the s390 adaption done in 233c1e6c319c.
This is safe to do on top of the riscv change even without the change to
arch_kexec_apply_relocations.
Fixes: 838b3e2848 ("RISC-V: Load purgatory in kexec_file")
Looks-good-to: liaochang (A) <liaochang1@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- Add Tegra234 cpufreq support (Sumit Gupta).
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang).
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois).
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana).
- Use list iterator only inside the list_for_each_entry loop (Xiaomeng
Tong, and Jakob Koschel).
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski).
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter).
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar).
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada).
- Add power sequences support to the system reboot and power off
code and make related platform-specific changes for multiple
platforms (Dmitry Osipenko, Geert Uytterhoeven).
-----BEGIN PGP SIGNATURE-----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=PAh+
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
- The majority of the changes are for fixes and clean ups.
Noticeable changes:
- Rework trace event triggers code to be easier to interact with.
- Support for embedding bootconfig with the kernel (as suppose to having it
embedded in initram). This is useful for embedded boards without initram
disks.
- Speed up boot by parallelizing the creation of tracefs files.
- Allow absolute ring buffer timestamps handle timestamps that use more than
59 bits.
- Added new tracing clock "TAI" (International Atomic Time)
- Have weak functions show up in available_filter_function list as:
__ftrace_invalid_address___<invalid-offset>
instead of using the name of the function before it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYpOgXRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qjkKAQDbpemxvpFyJlZqT8KgEIXubu+ag2/q
p0XDHaPS0zF9OQEAjTxg6GMEbnFYl6fzxZtOoEbiaQ7ppfdhRI8t6sSMVA8=
=+nDD
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The majority of the changes are for fixes and clean ups.
Notable changes:
- Rework trace event triggers code to be easier to interact with.
- Support for embedding bootconfig with the kernel (as suppose to
having it embedded in initram). This is useful for embedded boards
without initram disks.
- Speed up boot by parallelizing the creation of tracefs files.
- Allow absolute ring buffer timestamps handle timestamps that use
more than 59 bits.
- Added new tracing clock "TAI" (International Atomic Time)
- Have weak functions show up in available_filter_function list as:
__ftrace_invalid_address___<invalid-offset> instead of using the
name of the function before it"
* tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (52 commits)
ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function
tracing: Fix comments for event_trigger_separate_filter()
x86/traceponit: Fix comment about irq vector tracepoints
x86,tracing: Remove unused headers
ftrace: Clean up hash direct_functions on register failures
tracing: Fix comments of create_filter()
tracing: Disable kcov on trace_preemptirq.c
tracing: Initialize integer variable to prevent garbage return value
ftrace: Fix typo in comment
ftrace: Remove return value of ftrace_arch_modify_*()
tracing: Cleanup code by removing init "char *name"
tracing: Change "char *" string form to "char []"
tracing/timerlat: Do not wakeup the thread if the trace stops at the IRQ
tracing/timerlat: Print stacktrace in the IRQ handler if needed
tracing/timerlat: Notify IRQ new max latency only if stop tracing is set
kprobes: Fix build errors with CONFIG_KRETPROBES=n
tracing: Fix return value of trace_pid_write()
tracing: Fix potential double free in create_var_ref()
tracing: Use strim() to remove whitespace instead of doing it manually
ftrace: Deal with error return code of the ftrace_process_locs() function
...
If EFI pages are marked as read-only,
we should remove the _PAGE_WRITE flag.
The current code overwrites an unused value.
Fixes: b91540d52a ("RISC-V: Add EFI runtime services")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Link: https://lore.kernel.org/r/20220528014132.91052-1-heinrich.schuchardt@canonical.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
subsystems. Most notably some maintenance work in ocfs2 and initramfs.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo/6xQAKCRDdBJ7gKXxA
jkD9AQCPczLBbRWpe1edL+5VHvel9ePoHQmvbHQnufdTh9rB5QEAu0Uilxz4q9cx
xSZypNhj2n9f8FCYca/ZrZneBsTnAA8=
=AJEO
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"The non-MM patch queue for this merge window.
Not a lot of material this cycle. Many singleton patches against
various subsystems. Most notably some maintenance work in ocfs2
and initramfs"
* tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits)
kcov: update pos before writing pc in trace function
ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock
fs/ntfs: remove redundant variable idx
fat: remove time truncations in vfat_create/vfat_mkdir
fat: report creation time in statx
fat: ignore ctime updates, and keep ctime identical to mtime in memory
fat: split fat_truncate_time() into separate functions
MAINTAINERS: add Muchun as a memcg reviewer
proc/sysctl: make protected_* world readable
ia64: mca: drop redundant spinlock initialization
tty: fix deadlock caused by calling printk() under tty_port->lock
relay: remove redundant assignment to pointer buf
fs/ntfs3: validate BOOT sectors_per_clusters
lib/string_helpers: fix not adding strarray to device's resource list
kernel/crash_core.c: remove redundant check of ck_cmdline
ELF, uapi: fixup ELF_ST_TYPE definition
ipc/mqueue: use get_tree_nodev() in mqueue_get_tree()
ipc: update semtimedop() to use hrtimer
ipc/sem: remove redundant assignments
...
All instances of the function ftrace_arch_modify_prepare() and
ftrace_arch_modify_post_process() return zero. There's no point in
checking their return value. Just have them be void functions.
Link: https://lkml.kernel.org/r/20220518023639.4065-1-kunyu@nfschina.com
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This fixes a handful of issues with the XIP support, which has bit
rotted some lately.
* palmer/riscv-xip:
RISC-V: Fix the XIP build
RISC-V: Split out the XIP fixups into their own file
RISC-V: ignore xipImage
RISC-V: Avoid empty create_*_mapping definitions
* ultravisor communication device driver
* fix TEID on terminating storage key ops
RISC-V:
* Added Sv57x4 support for G-stage page table
* Added range based local HFENCE functions
* Added remote HFENCE functions based on VCPU requests
* Added ISA extension registers in ONE_REG interface
* Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
* Add support for the ARMv8.6 WFxT extension
* Guard pages for the EL2 stacks
* Trap and emulate AArch32 ID registers to hide unsupported features
* Ability to select and save/restore the set of hypercalls exposed
to the guest
* Support for PSCI-initiated suspend in collaboration with userspace
* GICv3 register-based LPI invalidation support
* Move host PMU event merging into the vcpu data structure
* GICv3 ITS save/restore fixes
* The usual set of small-scale cleanups and fixes
x86:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
* Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
* Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
* V_TSC_AUX support
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKN9M4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNLeAf+KizAlQwxEehHHeNyTkZuKyMawrD6
zsqAENR6i1TxiXe7fDfPFbO2NR0ZulQopHbD9mwnHJ+nNw0J4UT7g3ii1IAVcXPu
rQNRGMVWiu54jt+lep8/gDg0JvPGKVVKLhxUaU1kdWT9PhIOC6lwpP3vmeWkUfRi
PFL/TMT0M8Nfryi0zHB0tXeqg41BiXfqO8wMySfBAHUbpv8D53D2eXQL6YlMM0pL
2quB1HxHnpueE5vj3WEPQ3PCdy1M2MTfCDBJAbZGG78Ljx45FxSGoQcmiBpPnhJr
C6UGP4ZDWpml5YULUoA70k5ylCbP+vI61U4vUtzEiOjHugpPV5wFKtx5nw==
=ozWx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
file-backed transparent hugepages.
Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime
enablement of the recent huge page vmemmap optimization feature.
Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
David Vernet has done some fixup work on the memcg selftests.
Peter Xu has taught userfaultfd to handle write protection faults against
shmem- and hugetlbfs-backed files.
More DAMON development from SeongJae Park - adding online tuning of the
feature and support for monitoring of fixed virtual address ranges. Also
easier discovery of which monitoring operations are available.
Nadav Amit has done some optimization of TLB flushing during mprotect().
Neil Brown continues to labor away at improving our swap-over-NFS support.
David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
Peng Liu fixed some errors in the core hugetlb code.
Joao Martins has reduced the amount of memory consumed by device-dax's
compound devmaps.
Some cleanups of the arch-specific pagemap code from Anshuman Khandual.
Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
Roman Gushchin has done more work on the memcg selftests.
And, of course, many smaller fixes and cleanups. Notably, the customary
million cleanup serieses from Miaohe Lin.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo52xQAKCRDdBJ7gKXxA
jtJFAQD238KoeI9z5SkPMaeBRYSRQmNll85mxs25KapcEgWgGQD9FAb7DJkqsIVk
PzE+d9hEfirUGdL6cujatwJ6ejYR8Q8=
=nFe6
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
-----BEGIN PGP SIGNATURE-----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=Y2TB
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
* tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits)
genksyms: adjust the output format to modpost
kbuild: stop merging *.symversions
kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
modpost: extract symbol versions from *.cmd files
modpost: add sym_find_with_module() helper
modpost: change the license of EXPORT_SYMBOL to bool type
modpost: remove left-over cross_compile declaration
kbuild: record symbol versions in *.cmd files
kbuild: generate a list of objects in vmlinux
modpost: move *.mod.c generation to write_mod_c_files()
modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header
scripts/prune-kernel: Use kernel-install if available
kbuild: factor out the common installation code into scripts/install.sh
modpost: split new_symbol() to symbol allocation and hash table addition
modpost: make sym_add_exported() always allocate a new symbol
modpost: make multiple export error
modpost: dump Module.symvers in the same order of modules.order
modpost: traverse the namespace_list in order
modpost: use doubly linked list for dump_lists
modpost: traverse unresolved symbols in order
...
The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture we
supported that has no MMU implementation, but there are still a few
architectures (arm, m68k, riscv, sh and xtensa) that support CPUs with
and without an MMU.
- A series to add a generic ticket spinlock that can be shared by most
architectures with a working cmpxchg or ll/sc type atomic, including
the conversion of riscv, csky and openrisc. This series is also a
prerequisite for the loongarch64 architecture port that will come as
a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers.
-----BEGIN PGP SIGNATURE-----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=ri2Q
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture
we supported that has no MMU implementation, but there are still a
few architectures (arm, m68k, riscv, sh and xtensa) that support
CPUs with and without an MMU.
- A series to add a generic ticket spinlock that can be shared by
most architectures with a working cmpxchg or ll/sc type atomic,
including the conversion of riscv, csky and openrisc. This series
is also a prerequisite for the loongarch64 architecture port that
will come as a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers"
* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
h8300: remove stale bindings and symlink
sparc: add asm/stat.h to UAPI compile-test coverage
powerpc: add asm/stat.h to UAPI compile-test coverage
mips: add asm/stat.h to UAPI compile-test coverage
riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
agpgart.h: do not include <stdlib.h> from exported header
csky: Move to generic ticket-spinlock
RISC-V: Move to queued RW locks
RISC-V: Move to generic spinlocks
openrisc: Move to ticket-spinlock
asm-generic: qrwlock: Document the spinlock fairness requirements
asm-generic: qspinlock: Indicate the use of mixed-size atomics
asm-generic: ticket-lock: New generic ticket-based spinlock
remove the h8300 architecture
- don't over-decrypt memory (Robin Murphy)
- takes min align mask into account for the swiotlb max mapping size
(Tianyu Lan)
- use GFP_ATOMIC in dma-debug (Mikulas Patocka)
- fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
- don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
- cleanup swiotlb initialization and share more code with swiotlb-xen
(me, Stefano Stabellini)
-----BEGIN PGP SIGNATURE-----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=n2rk
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- don't over-decrypt memory (Robin Murphy)
- takes min align mask into account for the swiotlb max mapping size
(Tianyu Lan)
- use GFP_ATOMIC in dma-debug (Mikulas Patocka)
- fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
- don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
- cleanup swiotlb initialization and share more code with swiotlb-xen
(me, Stefano Stabellini)
* tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits)
dma-direct: don't over-decrypt memory
swiotlb: max mapping size takes min align mask into account
swiotlb: use the right nslabs-derived sizes in swiotlb_init_late
swiotlb: use the right nslabs value in swiotlb_init_remap
swiotlb: don't panic when the swiotlb buffer can't be allocated
dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages
swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm
x86: remove cruft from <asm/dma-mapping.h>
swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl
swiotlb: merge swiotlb-xen initialization into swiotlb
swiotlb: provide swiotlb_init variants that remap the buffer
swiotlb: pass a gfp_mask argument to swiotlb_init_late
swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction
swiotlb: make the swiotlb_init interface more useful
x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled
x86: remove the IOMMU table infrastructure
MIPS/octeon: use swiotlb_init instead of open coding it
arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region
swiotlb: rename swiotlb_late_init_with_default_size
...
A handful of functions unused functions were enabled during XIP builds,
which themselves didn't build correctly. This just disables the
functions entirely.
Fixes: e8a62cc26d ("riscv: Implement sv48 support")
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220420184056.7886-5-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This was broken by the original refactoring (as the XIP definitions
depend on <asm/pgtable.h>) and then more broken by the merge (as I
accidentally took the old version). This fixes both breakages, while
also pulling this out of <asm/asm.h> to avoid polluting most assembly
files with the XIP fixups.
Fixes: bee7fbc385 ("RISC-V CPU Idle Support")
Fixes: 63b13e64a8 ("RISC-V: Add arch functions for non-retentive suspend entry/exit")
Link: https://lore.kernel.org/r/20220420184056.7886-4-palmer@rivosinc.com
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding
to very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space
to remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections
that have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting.
This makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core
from Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wjii
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
-----BEGIN PGP SIGNATURE-----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=SUr3
-----END PGP SIGNATURE-----
Merge tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"These updates continue to refine the work began in 5.17 and 5.18 of
modernizing the RNG's crypto and streamlining and documenting its
code.
New for 5.19, the updates aim to improve entropy collection methods
and make some initial decisions regarding the "premature next" problem
and our threat model. The cloc utility now reports that random.c is
931 lines of code and 466 lines of comments, not that basic metrics
like that mean all that much, but at the very least it tells you that
this is very much a manageable driver now.
Here's a summary of the various updates:
- The random_get_entropy() function now always returns something at
least minimally useful. This is the primary entropy source in most
collectors, which in the best case expands to something like RDTSC,
but prior to this change, in the worst case it would just return 0,
contributing nothing. For 5.19, additional architectures are wired
up, and architectures that are entirely missing a cycle counter now
have a generic fallback path, which uses the highest resolution
clock available from the timekeeping subsystem.
Some of those clocks can actually be quite good, despite the CPU
not having a cycle counter of its own, and going off-core for a
stamp is generally thought to increase jitter, something positive
from the perspective of entropy gathering. Done very early on in
the development cycle, this has been sitting in next getting some
testing for a while now and has relevant acks from the archs, so it
should be pretty well tested and fine, but is nonetheless the thing
I'll be keeping my eye on most closely.
- Of particular note with the random_get_entropy() improvements is
MIPS, which, on CPUs that lack the c0 count register, will now
combine the high-speed but short-cycle c0 random register with the
lower-speed but long-cycle generic fallback path.
- With random_get_entropy() now always returning something useful,
the interrupt handler now collects entropy in a consistent
construction.
- Rather than comparing two samples of random_get_entropy() for the
jitter dance, the algorithm now tests many samples, and uses the
amount of differing ones to determine whether or not jitter entropy
is usable and how laborious it must be. The problem with comparing
only two samples was that if the cycle counter was extremely slow,
but just so happened to be on the cusp of a change, the slowness
wouldn't be detected. Taking many samples fixes that to some
degree.
This, combined with the other improvements to random_get_entropy(),
should make future unification of /dev/random and /dev/urandom
maybe more possible. At the very least, were we to attempt it again
today (we're not), it wouldn't break any of Guenter's test rigs
that broke when we tried it with 5.18. So, not today, but perhaps
down the road, that's something we can revisit.
- We attempt to reseed the RNG immediately upon waking up from system
suspend or hibernation, making use of the various timestamps about
suspend time and such available, as well as the usual inputs such
as RDRAND when available.
- Batched randomness now falls back to ordinary randomness before the
RNG is initialized. This provides more consistent guarantees to the
types of random numbers being returned by the various accessors.
- The "pre-init injection" code is now gone for good. I suspect you
in particular will be happy to read that, as I recall you
expressing your distaste for it a few months ago. Instead, to avoid
a "premature first" issue, while still allowing for maximal amount
of entropy availability during system boot, the first 128 bits of
estimated entropy are used immediately as it arrives, with the next
128 bits being buffered. And, as before, after the RNG has been
fully initialized, it winds up reseeding anyway a few seconds later
in most cases. This resulted in a pretty big simplification of the
initialization code and let us remove various ad-hoc mechanisms
like the ugly crng_pre_init_inject().
- The RNG no longer pretends to handle the "premature next" security
model, something that various academics and other RNG designs have
tried to care about in the past. After an interesting mailing list
thread, these issues are thought to be a) mainly academic and not
practical at all, and b) actively harming the real security of the
RNG by delaying new entropy additions after a potential compromise,
making a potentially bad situation even worse. As well, in the
first place, our RNG never even properly handled the premature next
issue, so removing an incomplete solution to a fake problem was
particularly nice.
This allowed for numerous other simplifications in the code, which
is a lot cleaner as a consequence. If you didn't see it before,
https://lore.kernel.org/lkml/YmlMGx6+uigkGiZ0@zx2c4.com/ may be a
thread worth skimming through.
- While the interrupt handler received a separate code path years ago
that avoids locks by using per-cpu data structures and a faster
mixing algorithm, in order to reduce interrupt latency, input and
disk events that are triggered in hardirq handlers were still
hitting locks and more expensive algorithms. Those are now
redirected to use the faster per-cpu data structures.
- Rather than having the fake-crypto almost-siphash-based random32
implementation be used right and left, and in many places where
cryptographically secure randomness is desirable, the batched
entropy code is now fast enough to replace that.
- As usual, numerous code quality and documentation cleanups. For
example, the initialization state machine now uses enum symbolic
constants instead of just hard coding numbers everywhere.
- Since the RNG initializes once, and then is always initialized
thereafter, a pretty heavy amount of code used during that
initialization is never used again. It is now completely cordoned
off using static branches and it winds up in the .text.unlikely
section so that it doesn't reduce cache compactness after the RNG
is ready.
- A variety of functions meant for waiting on the RNG to be
initialized were only used by vsprintf, and in not a particularly
optimal way. Replacing that usage with a more ordinary setup made
it possible to remove those functions.
- A cleanup of how we warn userspace about the use of uninitialized
/dev/urandom and uninitialized get_random_bytes() usage.
Interestingly, with the change you merged for 5.18 that attempts to
use jitter (but does not block if it can't), the majority of users
should never see those warnings for /dev/urandom at all now, and
the one for in-kernel usage is mainly a debug thing.
- The file_operations struct for /dev/[u]random now implements
.read_iter and .write_iter instead of .read and .write, allowing it
to also implement .splice_read and .splice_write, which makes
splice(2) work again after it was broken here (and in many other
places in the tree) during the set_fs() removal. This was a bit of
a last minute arrival from Jens that hasn't had as much time to
bake, so I'll be keeping my eye on this as well, but it seems
fairly ordinary. Unfortunately, read_iter() is around 3% slower
than read() in my tests, which I'm not thrilled about. But Jens and
Al, spurred by this observation, seem to be making progress in
removing the bottlenecks on the iter paths in the VFS layer in
general, which should remove the performance gap for all drivers.
- Assorted other bug fixes, cleanups, and optimizations.
- A small SipHash cleanup"
* tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (49 commits)
random: check for signals after page of pool writes
random: wire up fops->splice_{read,write}_iter()
random: convert to using fops->write_iter()
random: convert to using fops->read_iter()
random: unify batched entropy implementations
random: move randomize_page() into mm where it belongs
random: remove mostly unused async readiness notifier
random: remove get_random_bytes_arch() and add rng_has_arch_random()
random: move initialization functions out of hot pages
random: make consistent use of buf and len
random: use proper return types on get_random_{int,long}_wait()
random: remove extern from functions in header
random: use static branch for crng_ready()
random: credit architectural init the exact amount
random: handle latent entropy and command line from random_init()
random: use proper jiffies comparison macro
random: remove ratelimiting for in-kernel unseeded randomness
random: move initialization out of reseeding hot path
random: avoid initializing twice in credit race
random: use symbolic constants for crng_init states
...
needed anymore
- Other misc improvements
-----BEGIN PGP SIGNATURE-----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=CfX1
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Borislav Petkov:
- Remove all the code around GS switching on 32-bit now that it is not
needed anymore
- Other misc improvements
* tag 'x86_core_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bug: Use normal relative pointers in 'struct bug_entry'
x86/nmi: Make register_nmi_handler() more robust
x86/asm: Merge load_gs_index()
x86/32: Remove lazy GS macros
ELF: Remove elf_core_copy_kernel_regs()
x86/32: Simplify ELF_CORE_COPY_REGS
Currently on a 64-bit kernel built without CONFIG_MMU, /proc/cpuinfo will
show the current MMU mode as sv57.
While the device tree property "mmu-type" does have a value "riscv,none" to
describe a CPU without a MMU, since commit 73c7c8f68e ("riscv: Use
pgtable_l4_enabled to output mmu_type in cpuinfo"), we no longer rely on
device tree to output the MMU mode. (Not even for CONFIG_32BIT.)
Therefore, instead of readding code to look at the "mmu-type" device tree
property, let's continue with the existing convention to use fixed values
for configurations where we don't determine the MMU mode at runtime.
Add a new fixed value for !CONFIG_MMU in order to output the correct
MMU mode in cpuinfo.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Link: https://lore.kernel.org/r/20220414173037.1381927-1-niklas.cassel@wdc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Current implementation wastes another register to pass the
argument, but we only need addi to calculate the result. Optimize
the code with minimize the usage of registers.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220505035526.2974382-3-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The cmpxchg32 & cmpxchg32_local are not used in Linux anymore. So
clean up asm/cmpxchg.h.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220505035526.2974382-2-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* A fix for the fu540-c000 device tree to avoid a schema check failure
on the DMA node name.
* A fix to the PolarFire SOC device tree for a typo.
-----BEGIN PGP SIGNATURE-----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=hRBq
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- fix the fu540-c000 device tree to avoid a schema check failure on the
DMA node name
- fix typo in the PolarFire SOC device tree
* tag 'riscv-for-linus-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: microchip: fix gpio1 reg property typo
riscv: dts: sifive: fu540-c000: align dma node name with dtschema
This contains a new ticket-based spinlock that uses only generic
atomics and doesn't require as much from the memory system as qspinlock
does in order to be fair. It also includes a bit of documentation about
the qspinlock and qrwlock fairness requirements.
This will soon be used by a handful of architectures that don't meet the
qspinlock requirements.
-----BEGIN PGP SIGNATURE-----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=Ti7k
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=U6/l
-----END PGP SIGNATURE-----
Merge tag 'generic-ticket-spinlocks-v6' into for-next
asm-generic: New generic ticket-based spinlock
This contains a new ticket-based spinlock that uses only generic
atomics and doesn't require as much from the memory system as qspinlock
does in order to be fair. It also includes a bit of documentation about
the qspinlock and qrwlock fairness requirements.
This will soon be used by a handful of architectures that don't meet the
qspinlock requirements.
* tag 'generic-ticket-spinlocks-v6':
csky: Move to generic ticket-spinlock
RISC-V: Move to queued RW locks
RISC-V: Move to generic spinlocks
openrisc: Move to ticket-spinlock
asm-generic: qrwlock: Document the spinlock fairness requirements
asm-generic: qspinlock: Indicate the use of mixed-size atomics
asm-generic: ticket-lock: New generic ticket-based spinlock
Currently, there is no provision for vmm (qemu-kvm or kvmtool) to
query about multiple-letter ISA extensions. The config register
is only used for base single letter ISA extensions.
A new ISA extension register is added that will allow the vmm
to query about any ISA extension one at a time. It is enabled for
both single letter or multi-letter ISA extensions. The ISA extension
register is useful to if the vmm requires to retrieve/set single
extension while the config register should be used if all the base
ISA extension required to retrieve or set.
For any multi-letter ISA extensions, the new register interface
must be used.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
On RISC-V platforms with hardware VMID support, we share same
VMID for all VCPUs of a particular Guest/VM. This means we might
have stale G-stage TLB entries on the current Host CPU due to
some other VCPU of the same Guest which ran previously on the
current Host CPU.
To cleanup stale TLB entries, we simply flush all G-stage TLB
entries by VMID whenever underlying Host CPU changes for a VCPU.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The generic KVM has support for VCPU requests which can be used
to do arch-specific work in the run-loop. We introduce remote
HFENCE functions which will internally use VCPU requests instead
of host SBI calls.
Advantages of doing remote HFENCEs as VCPU requests are:
1) Multiple VCPUs of a Guest may be running on different Host CPUs
so it is not always possible to determine the Host CPU mask for
doing Host SBI call. For example, when VCPU X wants to do HFENCE
on VCPU Y, it is possible that VCPU Y is blocked or in user-space
(i.e. vcpu->cpu < 0).
2) To support nested virtualization, we will be having a separate
shadow G-stage for each VCPU and a common host G-stage for the
entire Guest/VM. The VCPU requests based remote HFENCEs helps
us easily synchronize the common host G-stage and shadow G-stage
of each VCPU without any additional IPI calls.
This is also a preparatory patch for upcoming nested virtualization
support where we will be having a shadow G-stage page table for
each Guest VCPU.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, the KVM_MAX_VCPUS value is 16384 for RV64 and 128
for RV32.
The KVM_MAX_VCPUS value is too high for RV64 and too low for
RV32 compared to other architectures (e.g. x86 sets it to 1024
and ARM64 sets it to 512). The too high value of KVM_MAX_VCPUS
on RV64 also leads to VCPU mask on stack consuming 2KB.
We set KVM_MAX_VCPUS to 1024 for both RV64 and RV32 to be
aligned other architectures.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Various __kvm_riscv_hfence_xyz() functions implemented in the
kvm/tlb.S are equivalent to corresponding HFENCE.GVMA instructions
and we don't have range based local HFENCE functions.
This patch provides complete set of local HFENCE functions which
supports range based TLB invalidation and supports HFENCE.VVMA
based functions. This is also a preparatory patch for upcoming
Svinval support in KVM RISC-V.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We should treat SBI HFENCE calls as NOPs until nested virtualization
is supported by KVM RISC-V. This will help us test booting a hypervisor
under KVM RISC-V.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The two-stage address translation defined by the RISC-V privileged
specification defines: VS-stage (guest virtual address to guest
physical address) programmed by the Guest OS and G-stage (guest
physical addree to host physical address) programmed by the
hypervisor.
To align with above terminology, we replace "stage2" with "gstage"
and "Stage2" with "G-stage" name everywhere in KVM RISC-V sources.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
This patch set implements kexec_file_load() for RISC-V, which is
currently only allowed on rv64 due to some minor build issues on 32-bit
platforms in the generic code. This allows users to kexec() using an FD
as opposed to a buffer.
Link: https://lore.kernel.org/all/20220408100914.150110-1-lizhengyu3@huawei.com/
* palmer/riscv-kexec_file:
RISC-V: Load purgatory in kexec_file
RISC-V: Add purgatory
RISC-V: Support for kexec_file on panic
RISC-V: Add kexec_file support
RISC-V: use memcpy for kexec_file mode
kexec_file: Fix kexec_file.c build error for riscv platform
With CONFIG_GENERIC_BUG_RELATIVE_POINTERS, the addr/file relative
pointers are calculated weirdly: based on the beginning of the bug_entry
struct address, rather than their respective pointer addresses.
Make the relative pointers less surprising to both humans and tools by
calculating them the normal way.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Link: https://lkml.kernel.org/r/f0e05be797a16f4fc2401eeb88c8450dcbe61df6.1652362951.git.jpoimboe@kernel.org
Two page table check related issues have been fixed here.
1. Open CONFIG_PAGE_TABLE_CHECK in riscv32, we got a compile error[1]:
error: implicit declaration of function 'pud_leaf'
Add pud_leaf() definition to incluce/asm-generic/pgtable-nopmd.h to fix
this issue.
2. Keep consistent with other pud_xxx() helpers, move pud_user() to
pgtable-64.h and add pud_user() to pgtable-nopmd.h.
[1]https://lore.kernel.org/linux-mm/202205161811.2nLxmN2O-lkp@intel.com/T/
Link: https://lkml.kernel.org/r/20220517074548.2227779-2-tongtiangen@huawei.com
Fixes: 856eed79f8d3 ("riscv/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Guohanjun <guohanjun@huawei.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch supports kexec_file to load and relocate purgatory.
It works well on riscv64 QEMU, being tested with devmem.
Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com>
Link: https://lore.kernel.org/r/20220408100914.150110-7-lizhengyu3@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch adds purgatory, the name and concept have been taken
from kexec-tools. Purgatory runs between two kernels, and do
verify sha256 hash to ensure the kernel to jump to is fine and
has not been corrupted after loading. Makefile is modified based
on x86 platform.
Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com>
Link: https://lore.kernel.org/r/20220408100914.150110-6-lizhengyu3@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch adds support for loading a kexec on panic (kdump) kernel.
It has been tested with vmcore-dmesg on riscv64 QEMU on both an smp
and a non-smp system.
Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com>
Link: https://lore.kernel.org/r/20220408100914.150110-5-lizhengyu3@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch adds support for kexec_file on RISC-V. I tested it on riscv64
QEMU with busybear-linux and single core along with the OpenSBI firmware
fw_jump.bin for generic platform.
On SMP system, it depends on CONFIG_{HOTPLUG_CPU, RISCV_SBI} to
resume/stop hart through OpenSBI firmware, it also needs a OpenSBI that
support the HSM extension.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com>
Link: https://lore.kernel.org/r/20220408100914.150110-4-lizhengyu3@huawei.com
[Palmer: Make 64-bit only]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The pointer to buffer loading kernel binaries is in kernel space for
kexec_fil mode, When copy_from_user copies data from pointer to a block
of memory, it checkes that the pointer is in the user space range, on
RISCV-V that is:
static inline bool __access_ok(unsigned long addr, unsigned long size)
{
return size <= TASK_SIZE && addr <= TASK_SIZE - size;
}
and TASK_SIZE is 0x4000000000 for 64-bits, which now causes
copy_from_user to reject the access of the field 'buf' of struct
kexec_segment that is in range [CONFIG_PAGE_OFFSET - VMALLOC_SIZE,
CONFIG_PAGE_OFFSET), is invalid user space pointer.
This patch fixes this issue by skipping access_ok(), use mempcy() instead.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Link: https://lore.kernel.org/r/20220408100914.150110-3-lizhengyu3@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Fixes dtbs_check warnings like:
dma@3000000: $nodename:0: 'dma@3000000' does not match '^dma-controller(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220407193856.18223-1-krzysztof.kozlowski@linaro.org
Fixes: c5ab54e994 ("riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Acked-by: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The RISC-V port supports the rv32i and rv64i base ISAs, but provides no
mechanism to run 32-bit userspace on 64-bit systems. This adds that
support, via the COMPAT framework. As the RISC-V ISAs (and uABIs) were
developed concurrently, the resulting compat support is mostly generic.
This includes a handful of cleanups to the generic compat infrastructure
to more cleanly support RISC-V, followed by the RISC-V implementation.
* palmer/riscv-compat:
riscv: compat: Add COMPAT Kbuild skeletal support
riscv: compat: ptrace: Add compat_arch_ptrace implement
riscv: compat: signal: Add rt_frame implementation
riscv: compat: vdso: Add setup additional pages implementation
riscv: compat: vdso: Add COMPAT_VDSO base code implementation
riscv: compat: Add hw capability check for elf
riscv: compat: Add elf.h implementation
riscv: compat: process: Add UXL_32 support in start_thread
riscv: compat: syscall: Add entry.S implementation
riscv: compat: syscall: Add compat_sys_call_table implementation
riscv: compat: Support TASK_SIZE for compat mode
riscv: compat: Add basic compat data type implementation
riscv: Fixup difference with defconfig
syscalls: compat: Fix the missing part for __SYSCALL_COMPAT
asm-generic: compat: Cleanup duplicate definitions
fs: stat: compat: Add __ARCH_WANT_COMPAT_STAT
arch: Add SYSVIPC_COMPAT for all architectures
compat: consolidate the compat_flock{,64} definition
uapi: always define F_GETLK64/F_SETLK64/F_SETLKW64 in fcntl.h
uapi: simplify __ARCH_FLOCK{,64}_PAD a little
Implement compat_setup_rt_frame for sigcontext save & restore. The
main process is the same with signal, but the rv32 pt_regs' size
is different from rv64's, so we needs convert them.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220405071314.3225832-19-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
In the event that random_get_entropy() can't access a cycle counter or
similar, falling back to returning 0 is really not the best we can do.
Instead, at least calling random_get_entropy_fallback() would be
preferable, because that always needs to return _something_, even
falling back to jiffies eventually. It's not as though
random_get_entropy_fallback() is super high precision or guaranteed to
be entropic, but basically anything that's not zero all the time is
better than returning zero all the time.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Adds support for Svpbmt, the "Supervisor-mode: page-based memory types"
extension, which allows pages to be marked as non-cacheable and/or I/O.
This also includes support for the Allwinner D1's page table attributes
via the alternatives framework, which differ from Svpbmt in various ways
but are necessary to make the D1 function.
* palmer/riscv-d1:
riscv: add memory-type errata for T-Head
riscv: don't use global static vars to store alternative data
riscv: remove FIXMAP_PAGE_IO and fall back to its default value
riscv: add RISC-V Svpbmt extension support
riscv: Fix accessing pfn bits in PTEs for non-32bit variants
riscv: move boot alternatives to after fill_hwcap
riscv: prevent compressed instructions in alternatives
riscv: extend concatenated alternatives-lines to the same length
riscv: implement ALTERNATIVE_2 macro
riscv: implement module alternatives
riscv: allow different stages with alternatives
riscv: integrate alternatives better into the main architecture
Some current cpus based on T-Head cores implement memory-types
way different than described in the svpbmt spec even going
so far as using PTE bits marked as reserved.
Add the T-Head vendor-id and necessary errata code to
replace the affected instructions.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220511192921.2223629-13-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Right now the code uses a global struct to store vendor-ids
and another global variable to store the vendor-patch-function.
There exist specific cases where we'll need to patch the kernel
at an even earlier stage, where trying to write to a static
variable might actually result in hangs.
Also collecting the vendor-information consists of 3 sbi-ecalls
(or csr-reads) which is pretty negligible in the context of
booting a kernel.
So rework the code to not rely on static variables and instead
collect the vendor-information when a round of alternatives is
to be applied.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Link: https://lore.kernel.org/r/20220511192921.2223629-12-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
If not defined in the arch, FIXMAP_PAGE_IO defaults to PAGE_KERNEL_IO,
which we defined when adding the svpbmt implementation.
So drop the FIXMAP_PAGE_IO riscv define.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220511192921.2223629-11-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Svpbmt (the S should be capitalized) is the
"Supervisor-mode: page-based memory types" extension
that specifies attributes for cacheability, idempotency
and ordering.
The relevant settings are done in special bits in PTEs:
Here is the svpbmt PTE format:
| 63 | 62-61 | 60-8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
N MT RSW D A G U X W R V
^
Of the Reserved bits [63:54] in a leaf PTE, the high bit is already
allocated (as the N bit), so bits [62:61] are used as the MT (aka
MemType) field. This field specifies one of three memory types that
are close equivalents (or equivalent in effect) to the three main x86
and ARMv8 memory types - as shown in the following table.
RISC-V
Encoding &
MemType RISC-V Description
---------- ------------------------------------------------
00 - PMA Normal Cacheable, No change to implied PMA memory type
01 - NC Non-cacheable, idempotent, weakly-ordered Main Memory
10 - IO Non-cacheable, non-idempotent, strongly-ordered I/O memory
11 - Rsvd Reserved for future standard use
As the extension will not be present on all implementations,
implement a method to handle cpufeatures via alternatives
to not incur runtime penalties on cpu variants not supporting
specific extensions and patch relevant code parts at runtime.
Co-developed-by: Wei Fu <wefu@redhat.com>
Signed-off-by: Wei Fu <wefu@redhat.com>
Co-developed-by: Liu Shaohua <liush@allwinnertech.com>
Signed-off-by: Liu Shaohua <liush@allwinnertech.com>
Co-developed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
[moved to use the alternatives mechanism]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Link: https://lore.kernel.org/r/20220511192921.2223629-10-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
On rv32 the PFN part of PTEs is defined to use bits [xlen-1:10]
while on rv64 it is defined to use bits [53:10], leaving [63:54]
as reserved.
With upcoming optional extensions like svpbmt these previously
reserved bits will get used so simply right-shifting the PTE
to get the PFN won't be enough.
So introduce a _PAGE_PFN_MASK constant to mask the correct bits
for both rv32 and rv64 before shifting.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Link: https://lore.kernel.org/r/20220511192921.2223629-9-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Move the application of boot alternatives to after the hw-capabilities
are populated. This allows to check for available extensions when
determining which alternatives to apply and also makes it actually
work if CONFIG_SMP is disabled for whatever reason.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220511192921.2223629-8-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Instructions are opportunistically compressed by the RISC-V assembler
when possible, but in alternatives-blocks both the old and new content
need to be the same size, so having the toolchain do somewhat random
optimizations will cause strange side-effects like
"attempt to move .org backwards" compile-time errors.
Already a simple "and" used in alternatives assembly will cause these
mismatched code sizes.
So prevent compressed instructions to be generated in alternatives-
code and use option-push and -pop to only limit this to the relevant
code blocks
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Link: https://lore.kernel.org/r/20220511192921.2223629-7-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ALT_NEW_CONTENT already uses same-length assembler lines, so
extend this to the other elements as well.
This makes it more readable when these elements need to be extended
in the future.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Link: https://lore.kernel.org/r/20220511192921.2223629-6-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When the alternatives were added the commit already provided a template
on how to implement 2 different alternatives for one piece of code.
Make this usable.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Link: https://lore.kernel.org/r/20220511192921.2223629-5-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This allows alternatives to also be applied when loading modules
and follows the implementation of other architectures (e.g. arm64).
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Link: https://lore.kernel.org/r/20220511192921.2223629-4-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Future features may need to be applied at a different
time during boot, so allow defining stages for alternatives
and handling them differently depending on the stage.
Also make the alternatives-location more flexible so that
future stages may provide their own location.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Link: https://lore.kernel.org/r/20220511192921.2223629-3-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Right now the alternatives need to be explicitly enabled and
erratas are limited to SiFive ones.
We want to use alternatives not only for patching soc erratas,
but in the future also for handling different behaviour depending
on the existence of future extensions.
So move the core alternatives over to the kernel subdirectory
and move the CONFIG_RISCV_ALTERNATIVE to be a hidden symbol
which we expect relevant erratas and extensions to just select
if needed.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Link: https://lore.kernel.org/r/20220511192921.2223629-2-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now that we have fair spinlocks we can use the generic queued rwlocks,
so we might as well do so.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Our existing spinlocks aren't fair and replacing them has been on the
TODO list for a long time. This moves to the recently-introduced ticket
spinlocks, which are simple enough that they are likely to be correct
and fast on the vast majority of extant implementations.
This introduces a horrible hack that allows us to split out the spinlock
conversion from the rwlock conversion. We have to do the spinlocks
first because qrwlock needs fair spinlocks, but we don't want to pollute
the asm-generic code to support the generic spinlocks without qrwlocks.
Thus we pollute the RISC-V code, but just until the next commit as it's
all going away.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guo Ren <guoren@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Many architectures have similar install.sh scripts.
The first half is really generic; it verifies that the kernel image
and System.map exist, then executes ~/bin/${INSTALLKERNEL} or
/sbin/${INSTALLKERNEL} if available.
The second half is kind of arch-specific; it copies the kernel image
and System.map to the destination, but the code is slightly different.
Factor out the generic part into scripts/install.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
In preparation for Clang supporting randstruct, reorganize the Kconfigs,
move the attribute macros, and generalize the feature to be named
CONFIG_RANDSTRUCT for on/off, CONFIG_RANDSTRUCT_FULL for the full
randomization mode, and CONFIG_RANDSTRUCT_PERFORMANCE for the cache-line
sized mode.
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503205503.3054173-4-keescook@chromium.org
Add fn and fn_arg members into struct kernel_clone_args and test for
them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER).
This allows any task that wants to be a user space task that only runs
in kernel mode to use this functionality.
The code on x86 is an exception and still retains a PF_KTHREAD test
because x86 unlikely everything else handles kthreads slightly
differently than user space tasks that start with a function.
The functions that created tasks that start with a function
have been updated to set ".fn" and ".fn_arg" instead of
".stack" and ".stack_size". These functions are fork_idle(),
create_io_thread(), kernel_thread(), and user_mode_thread().
Link: https://lkml.kernel.org/r/20220506141512.516114-4-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
With io_uring we have started supporting tasks that are for most
purposes user space tasks that exclusively run code in kernel mode.
The kernel task that exec's init and tasks that exec user mode
helpers are also user mode tasks that just run kernel code
until they call kernel execve.
Pass kernel_clone_args into copy_thread so these oddball
tasks can be supported more cleanly and easily.
v2: Fix spelling of kenrel_clone_args on h8300
Link: https://lkml.kernel.org/r/20220506141512.516114-2-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* A fix to relocate the DTB early in boot, in cases where the bootloader
doesn't put the DTB in a region that will end up mapped by the kernel.
This manifests as a crash early in boot on a handful of
configurations.
-----BEGIN PGP SIGNATURE-----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=JBfr
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
- A fix to relocate the DTB early in boot, in cases where the
bootloader doesn't put the DTB in a region that will end up
mapped by the kernel.
This manifests as a crash early in boot on a handful of
configurations.
* tag 'riscv-for-linus-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: relocate DTB if it's outside memory region
* Take care of faults occuring between the PARange and
IPA range by injecting an exception
* Fix S2 faults taken from a host EL0 in protected mode
* Work around Oops caused by a PMU access from a 32bit
guest when PMU has been created. This is a temporary
bodge until we fix it for good.
x86:
* Fix potential races when walking host page table
* Fix shadow page table leak when KVM runs nested
* Work around bug in userspace when KVM synthesizes leaf
0x80000021 on older (pre-EPYC) or Intel processors
Generic (but affects only RISC-V):
* Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJuxI4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNjfQf/X4Rn6+sTkXRS0UHWEu+q9FjJ+mIx
ZUWdbncf0brUB1RPAFfKaiQHo0t2Req+iTlpqZL0nVQ4myNUelHYube/sZdK/aBR
WOjKZE0hugGyMH3js2bsTdgzbcphThyYAX97qGZNb7tsPGhBiw7c98KhjxlieJab
D8LMNtM3uzPDxg422GfOm8ge2VbpySS5oRoGHfbD+4FiLYlXoCYfZuzlFwFFIGxw
uHm5zzfX5jshayFpFYVSJHtARXlpwJWKz9yl63QjHrhVitW4m5j4re3aNfboL6Pd
F5Z9K+DKhJLAH5cqmgiPPe2CGMvmRwKrN3F9MqV91xDPBT8J4rrowEeboQ==
=SwSU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Take care of faults occuring between the PARange and IPA range by
injecting an exception
- Fix S2 faults taken from a host EL0 in protected mode
- Work around Oops caused by a PMU access from a 32bit guest when PMU
has been created. This is a temporary bodge until we fix it for
good.
x86:
- Fix potential races when walking host page table
- Fix shadow page table leak when KVM runs nested
- Work around bug in userspace when KVM synthesizes leaf 0x80000021
on older (pre-EPYC) or Intel processors
Generic (but affects only RISC-V):
- Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: work around QEMU issue with synthetic CPUID leaves
Revert "x86/mm: Introduce lookup_address_in_mm()"
KVM: x86/mmu: fix potential races when walking host page table
KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR
KVM: arm64: Inject exception on out-of-IPA-range translation fault
KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not set
KVM: arm64: Handle host stage-2 faults from 32-bit EL0
touching the core so these fixes are fairly well contained to specific
devices that use these clk drivers.
- Some Allwinner SoC fixes to gracefully handle errors and mark an RTC
clk as critical so that the RTC keeps ticking.
- Fix AXI bus clks and RTC clk design for Microchip PolarFire SoC
driver introduced this cycle. This has some devicetree bits acked by
riscv maintainers. We're fixing it now so that the prior bindings
aren't released in a major kernel version.
- Remove a reset on Microchip PolarFire SoCs that broke when enabling
CONFIG_PM.
- Set a min/max for the Qualcomm graphics clk. This got broken by the
clk rate range patches introduced this cycle.
-----BEGIN PGP SIGNATURE-----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=i8nA
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A semi-large pile of clk driver fixes this time around.
Nothing is touching the core so these fixes are fairly well contained
to specific devices that use these clk drivers.
- Some Allwinner SoC fixes to gracefully handle errors and mark an
RTC clk as critical so that the RTC keeps ticking.
- Fix AXI bus clks and RTC clk design for Microchip PolarFire SoC
driver introduced this cycle. This has some devicetree bits acked
by riscv maintainers. We're fixing it now so that the prior
bindings aren't released in a major kernel version.
- Remove a reset on Microchip PolarFire SoCs that broke when enabling
CONFIG_PM.
- Set a min/max for the Qualcomm graphics clk. This got broken by the
clk rate range patches introduced this cycle"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()
clk: sunxi-ng: sun6i-rtc: Mark rtc-32k as critical
riscv: dts: microchip: reparent mpfs clocks
clk: microchip: mpfs: add RTCREF clock control
clk: microchip: mpfs: re-parent the configurable clocks
dt-bindings: rtc: add refclk to mpfs-rtc
dt-bindings: clk: mpfs: add defines for two new clocks
dt-bindings: clk: mpfs document msspll dri registers
riscv: dts: microchip: fix usage of fic clocks on mpfs
clk: microchip: mpfs: mark CLK_ATHENA as critical
clk: microchip: mpfs: fix parents for FIC clocks
clk: qcom: clk-rcg2: fix gfx3d frequency calculation
clk: microchip: mpfs: don't reset disabled peripherals
clk: sunxi-ng: fix not NULL terminated coccicheck error
Patch series "Convert vmcore to use an iov_iter", v5.
For some reason several people have been sending bad patches to fix
compiler warnings in vmcore recently. Here's how it should be done.
Compile-tested only on x86. As noted in the first patch, s390 should take
this conversion a bit further, but I'm not inclined to do that work
myself.
This patch (of 3):
Instead of passing in a 'buf' and 'userbuf' argument, pass in an iov_iter.
s390 needs more work to pass the iov_iter down further, or refactor, but
I'd be more comfortable if someone who can test on s390 did that work.
It's more convenient to convert the whole of read_from_oldmem() to take an
iov_iter at the same time, so rename it to read_from_oldmem_iter() and add
a temporary read_from_oldmem() wrapper that creates an iov_iter.
Link: https://lkml.kernel.org/r/20220408090636.560886-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20220408090636.560886-2-bhe@redhat.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* A fix to properly ensure a single CPU is running during patch_text().
* A defconfig update to include RPMSG_CTRL when RPMSG_CHAR was set,
necessary after a recent refactoring.
-----BEGIN PGP SIGNATURE-----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=BK1v
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to properly ensure a single CPU is running during patch_text().
- A defconfig update to include RPMSG_CTRL when RPMSG_CHAR was set,
necessary after a recent refactoring.
* tag 'riscv-for-linus-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: configs: Configs that had RPMSG_CHAR now get RPMSG_CTRL
riscv: patch_text: Fixup last cpu should be master
Fixes for (relatively) old bugs, to be merged in both the -rc and next
development trees:
* Fix potential races when walking host page table
* Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
* Fix shadow page table leak when KVM runs nested
When KVM_EXIT_SYSTEM_EVENT was introduced, it included a flags
member that at the time was unused. Unfortunately this extensibility
mechanism has several issues:
- x86 is not writing the member, so it would not be possible to use it
on x86 except for new events
- the member is not aligned to 64 bits, so the definition of the
uAPI struct is incorrect for 32- on 64-bit userspace. This is a
problem for RISC-V, which supports CONFIG_KVM_COMPAT, but fortunately
usage of flags was only introduced in 5.18.
Since padding has to be introduced, place a new field in there
that tells if the flags field is valid. To allow further extensibility,
in fact, change flags to an array of 16 values, and store how many
of the values are valid. The availability of the new ndata field
is tied to a system capability; all architectures are changed to
fill in the field.
To avoid breaking compilation of userspace that was using the flags
field, provide a userspace-only union to overlap flags with data[0].
The new field is placed at the same offset for both 32- and 64-bit
userspace.
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Message-Id: <20220422103013.34832-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case the DTB provided by the bootloader/BootROM is before the kernel
image or outside /memory, we won't be able to access it through the
linear mapping, and get a segfault on setup_arch(). Currently OpenSBI
relocates DTB but that's not always the case (e.g. if FW_JUMP_FDT_ADDR
is not specified), and it's also not the most portable approach since
the default FW_JUMP_FDT_ADDR of the generic platform relocates the DTB
at a specific offset that may not be available. To avoid this situation
copy DTB so that it's visible through the linear mapping.
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Link: https://lore.kernel.org/r/20220322132839.3653682-1-mick@ics.forth.gr
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: f105aa940e ("riscv: add BUILTIN_DTB support for MMU-enabled targets")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-27
We've added 85 non-merge commits during the last 18 day(s) which contain
a total of 163 files changed, 4499 insertions(+), 1521 deletions(-).
The main changes are:
1) Teach libbpf to enhance BPF verifier log with human-readable and relevant
information about failed CO-RE relocations, from Andrii Nakryiko.
2) Add typed pointer support in BPF maps and enable it for unreferenced pointers
(via probe read) and referenced ones that can be passed to in-kernel helpers,
from Kumar Kartikeya Dwivedi.
3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward
progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel.
4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced
the effective prog array before the rcu_read_lock, from Stanislav Fomichev.
5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic
for USDT arguments under riscv{32,64}, from Pu Lehui.
6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire.
7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage
so it can be shipped under Alpine which is musl-based, from Dominique Martinet.
8) Clean up {sk,task,inode} local storage trace RCU handling as they do not
need to use call_rcu_tasks_trace() barrier, from KP Singh.
9) Improve libbpf API documentation and fix error return handling of various
API functions, from Grant Seltzer.
10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data
length of frags + frag_list may surpass old offset limit, from Liu Jian.
11) Various improvements to prog_tests in area of logging, test execution
and by-name subtest selection, from Mykola Lysenko.
12) Simplify map_btf_id generation for all map types by moving this process
to build time with help of resolve_btfids infra, from Menglong Dong.
13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*()
helpers; the probing caused always to use old helpers, from Runqing Yang.
14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS
tracing macros, from Vladimir Isaev.
15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel
switched to memcg-based memory accouting a while ago, from Yafang Shao.
16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu.
17) Fix BPF selftests in two occasions to work around regressions caused by latest
LLVM to unblock CI until their fixes are worked out, from Yonghong Song.
18) Misc cleanups all over the place, from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add libbpf's log fixup logic selftests
libbpf: Fix up verifier log for unguarded failed CO-RE relos
libbpf: Simplify bpf_core_parse_spec() signature
libbpf: Refactor CO-RE relo human description formatting routine
libbpf: Record subprog-resolved CO-RE relocations unconditionally
selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests
libbpf: Avoid joining .BTF.ext data with BPF programs by section name
libbpf: Fix logic for finding matching program for CO-RE relocation
libbpf: Drop unhelpful "program too large" guess
libbpf: Fix anonymous type check in CO-RE logic
bpf: Compute map_btf_id during build time
selftests/bpf: Add test for strict BTF type check
selftests/bpf: Add verifier tests for kptr
selftests/bpf: Add C tests for kptr
libbpf: Add kptr type tag macros to bpf_helpers.h
bpf: Make BTF type match stricter for release arguments
bpf: Teach verifier about kptr_get kfunc helpers
bpf: Wire up freeing of referenced kptr
bpf: Populate pairs of btf_id and destructor kfunc in btf
bpf: Adapt copy_map_value for multiple offset case
...
====================
Link: https://lore.kernel.org/r/20220427224758.20976-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no vgettimeofday supported in rv32 that makes simple to
generate rv32 vdso code which only needs riscv64 compiler. Other
architectures need change compiler or -m (machine parameter) to
support vdso32 compiling. If rv32 support vgettimeofday (which
cause C compile) in future, we would add CROSS_COMPILE to support
that makes more requirement on compiler enviornment.
linux-rv64/arch/riscv/kernel/compat_vdso/compat_vdso.so.dbg:
file format elf64-littleriscv
Disassembly of section .text:
0000000000000800 <__vdso_rt_sigreturn>:
800: 08b00893 li a7,139
804: 00000073 ecall
808: 0000 unimp
...
000000000000080c <__vdso_getcpu>:
80c: 0a800893 li a7,168
810: 00000073 ecall
814: 8082 ret
...
0000000000000818 <__vdso_flush_icache>:
818: 10300893 li a7,259
81c: 00000073 ecall
820: 8082 ret
linux-rv32/arch/riscv/kernel/vdso/vdso.so.dbg:
file format elf32-littleriscv
Disassembly of section .text:
00000800 <__vdso_rt_sigreturn>:
800: 08b00893 li a7,139
804: 00000073 ecall
808: 0000 unimp
...
0000080c <__vdso_getcpu>:
80c: 0a800893 li a7,168
810: 00000073 ecall
814: 8082 ret
...
00000818 <__vdso_flush_icache>:
818: 10300893 li a7,259
81c: 00000073 ecall
820: 8082 ret
Finally, reuse all *.S from vdso in compat_vdso that makes
implementation clear and readable.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220405071314.3225832-17-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Detect hardware COMPAT (32bit U-mode) capability in rv64. If not
support COMPAT mode in hw, compat_elf_check_arch would return
false by compat_binfmt_elf.c
Add CLASS to enhance (compat_)elf_check_arch to distinguish
32BIT/64BIT elf.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220405071314.3225832-16-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
If the current task is in COMPAT mode, set SR_UXL_32 in status for
returning userspace. We need CONFIG _COMPAT to prevent compiling
errors with rv32 defconfig.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220405071314.3225832-14-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
