There is a hidden logic for acpi_tb_install_standard_table() as it can be
invoked from the boot stage and during runtime.
1. When it is invoked from the OS boot stage, the ACPICA mutex may not have
been initialized yet and so acpi_ut_acquire_mutex()/acpi_ut_release_mutex()
are not invoked in these code paths:
acpi_initialize_tables
acpi_tb_parse_root_table
acpi_tb_install_standard_table (4 invocations)
acpi_install_table
acpi_tb_install_standard_table
2. When it is invoked during the runtime, ACPICA mutex is used as
appropriate:
acpi_ex_load_op
acpi_tb_install_and_load_table
acpi_tb_install_standard_table
acpi_load_table
acpi_tb_install_and_load_table
acpi_tb_install_standard_table
The mutex is now used in acpi_tb_install_and_load_table(), while it actually
should be in acpi_tb_install_standard_table().
This introduces another problem in acpi_tb_install_standard_table() where
acpi_gbl_table_handler is invoked from and the lock contexts are thus not
consistent for the table handlers. This triggers a regression when
acpi_get_table()/acpi_put_table() start to hold table mutex during runtime.
The regression is noticed by LKP as new errors reported by ACPICA mutex
debugging facility.
[ 2.043693] ACPI Error: Mutex [ACPI_MTX_Tables] already acquired by this thread [497483776] (20160930/utmutex-254)
[ 2.054084] ACPI Error: Mutex [0x2] is not acquired, cannot release (20160930/utmutex-326)
And it triggers a deadlock:
[ 247.066214] INFO: task swapper/0:1 blocked for more than 120 seconds.
...
[ 247.091271] Call Trace:
...
[ 247.121523] down_timeout+0x47/0x50
[ 247.125065] acpi_os_wait_semaphore+0x47/0x62
[ 247.129475] acpi_ut_acquire_mutex+0x43/0x81
[ 247.133798] acpi_get_table+0x2d/0x84
[ 247.137513] acpi_table_attr_init+0xcd/0x100
[ 247.146590] acpi_sysfs_table_handler+0x5d/0xb8
[ 247.151174] acpi_bus_table_handler+0x23/0x2a
[ 247.155583] acpi_tb_install_standard_table+0xe0/0x213
[ 247.164489] acpi_tb_install_and_load_table+0x3a/0x82
[ 247.169592] acpi_ex_load_op+0x194/0x201
...
[ 247.200108] acpi_ns_evaluate+0x1bb/0x247
[ 247.204170] acpi_evaluate_object+0x178/0x274
[ 247.213249] acpi_processor_set_pdc+0x154/0x17b
...
The table mutex is held in acpi_tb_install_and_load_table() and is re-visited by
acpi_get_table().
Noticing that the early mutex requirement actually belongs to the OSL layer
and has already been handled in acpi_os_wait_semaphore()/acpi_os_signal_semaphore(),
the regression canbe fixed by removing this hidden logic from the ACPICA core
to the OS-specific code.
Fixes: 174cc7187e ("ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel")
Reported-and-tested-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Reported-by: Ye Xiaolong <xiaolong.ye@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since all users are cleaned up, remove the 2 deprecated APIs due to no
users.
As a Linux variable rather than an ACPICA variable, acpi_gbl_permanent_mmap
is renamed to acpi_permanent_mmap to have a consistent coding style across
entire Linux ACPI subsystem.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch removes the users of the deprectated APIs:
acpi_get_table_with_size()
early_acpi_os_unmap_memory()
The following APIs should be used instead of:
acpi_get_table()
acpi_put_table()
The deprecated APIs are invented to be a replacement of acpi_get_table()
during the early stage so that the early mapped pointer will not be stored
in ACPICA core and thus the late stage acpi_get_table() won't return a
wrong pointer. The mapping size is returned just because it is required by
early_acpi_os_unmap_memory() to unmap the pointer during early stage.
But as the mapping size equals to the acpi_table_header.length
(see acpi_tb_init_table_descriptor() and acpi_tb_validate_table()), when
such a convenient result is returned, driver code will start to use it
instead of accessing acpi_table_header to obtain the length.
Thus this patch cleans up the drivers by replacing returned table size with
acpi_table_header.length, and should be a no-op.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit d98de9ca14891130efc5dcdc871b97eb27b4b0f5
FADT parsing code requires FADT to be installed as
ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL, using new
acpi_tb_get_table()/acpi_tb_put_table(), other address types can also be allowed,
thus facilitates FADT customization with virtual address. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/d98de9ca
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit cac6790954d4d752a083e6122220b8a22febcd07
This patch back ports Linux acpi_get_table_with_size() and
early_acpi_os_unmap_memory() into ACPICA upstream to reduce divergences.
The 2 APIs are used by Linux as table management APIs for long time, it
contains a hidden logic that during the early stage, the mapped tables
should be unmapped before the early stage ends.
During the early stage, tables are handled by the following sequence:
acpi_get_table_with_size();
parse the table
early_acpi_os_unmap_memory();
During the late stage, tables are handled by the following sequence:
acpi_get_table();
parse the table
Linux uses acpi_gbl_permanent_mmap to distinguish the early stage and the
late stage.
The reasoning of introducing acpi_get_table_with_size() is: ACPICA will
remember the early mapped pointer in acpi_get_table() and Linux isn't able to
prevent ACPICA from using the wrong early mapped pointer during the late
stage as there is no API provided from ACPICA to be an inverse of
acpi_get_table() to forget the early mapped pointer.
But how ACPICA can work with the early/late stage requirement? Inside of
ACPICA, tables are ensured to be remained in "INSTALLED" state during the
early stage, and they are carefully not transitioned to "VALIDATED" state
until the late stage. So the same logic is in fact implemented inside of
ACPICA in a different way. The gap is only that the feature is not provided
to the OSPMs in an accessible external API style.
It then is possible to fix the gap by providing an inverse of
acpi_get_table() from ACPICA, so that the two Linux sequences can be
combined:
acpi_get_table();
parse the table
acpi_put_table();
In order to work easier with the current Linux code, acpi_get_table() and
acpi_put_table() is implemented in a usage counting based style:
1. When the usage count of the table is increased from 0 to 1, table is
mapped and .Pointer is set with the mapping address (VALIDATED);
2. When the usage count of the table is decreased from 1 to 0, .Pointer
is unset and the mapping address is unmapped (INVALIDATED).
So that we can deploy the new APIs to Linux with minimal effort by just
invoking acpi_get_table() in acpi_get_table_with_size() and invoking
acpi_put_table() in early_acpi_os_unmap_memory(). Lv Zheng.
Link: https://github.com/acpica/acpica/commit/cac67909
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 198fde8a061ac77357bcf1752e3c988fbe59f128
Implements a decode function for the ARGP_* parser info values
for all AML opcodes.
Link: https://github.com/acpica/acpica/commit/198fde8a
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 68af3c3aa238dd8040e846ac6b4827a016434d8d
During early OS boot stage, drivers that have mapped system memory should
unmap it during the same stage. Linux kernel has an error message
indicating the unbalanced early memory mappings.
This patch back ports such error message into ACPICA for the early table
mappings, so that ACPICA development environment is also aware of this OS
specific requirement and thus is able to ensure the consistent quality
locally. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/68af3c3a
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 80e24663b212daac0c32767fdbd8a46892292f1f
This patch introduces acpi_tb_unload_table() to eliminate redundant code from
acpi_ex_unload_table() and acpi_unload_parent_table().
No functional change. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/80e24663
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 7fdac0289faa1c28b91413c8e394e87372aa69e6
acpi_tb_install_and_load_table() can invoke acpi_tb_load_table() to eliminate
redundant code.
No functional change. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/7fdac028
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 543342ab7a676f4eb0c9f100d349388a84dff0e8
This patch changes acpi_ev_initialize_region(), stop returning AE_NOT_EXIST
from it so that, not only in acpi_ds_load2_end_op(), but all places invoking
this function won't emit exceptions. The exception can be seen in
acpi_ds_initialize_objects() when certain table loading mode is chosen.
This patch also removes useless acpi_ns_locked from acpi_ev_initialize_region()
as this function will always be invoked with interpreter lock held now, and
the lock granularity has been tuned to lock around _REG execution, thus it
is now handled by acpi_ex_exit_interpreter(). Lv Zheng.
Link: https://github.com/acpica/acpica/commit/543342ab
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit bc481e758e54f7644fd0b657119ca7763d8b6a9c
This is a back port result of the following commit:
Commit: 8633db6b02
Subject: ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()
Link: https://github.com/acpica/acpica/commit/bc481e75
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit f9fe27a68a90c9d32dd3156241a5e788fb6956ea
This patch adds acpi_ns_handle_to_name() so that in the acpi_get_name():
1. Logics can be made simpler,
2. Lock held for acpi_ns_handle_to_name() can also be applied to
acpi_ns_handle_to_pathname().
The lock might be useless (see Link 1 below), but kept as acpi_get_name()
is an external API. Except the lock correction, this patch is a functional
no-op. BZ 1182, Lv Zheng.
Link: https://github.com/acpica/acpica/commit/f9fe27a6
Link: https://bugs.acpica.org/show_bug.cgi?id=1182 [# 1]
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pavel Machek reports that commit 6ea8c546f3 (ACPICA: FADT support
cleanup) breaks thermal management on his Thinkpad X60 and T40p, so
revert it.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=187311
Fixes: 6ea8c546f3 (ACPICA: FADT support cleanup)
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We have a couple of drivers, acpi_apd.c and acpi_lpss.c,
that need to pass extra build-in properties to the devices
they create. Previously the drivers added those properties
to the struct device which is member of the struct
acpi_device, but that does not work. Those properties need
to be assigned to the struct device of the platform device
instead in order for them to become available to the
drivers.
To fix this, this patch changes acpi_create_platform_device
function to take struct property_entry pointer as parameter.
Fixes: 20a875e2e8 (serial: 8250_dw: Add quirk for APM X-Gene SoC)
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpica-fixes:
ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()
ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method()
ACPICA: Dispatcher: Fix order issue of method termination
* acpi-pci-fixes:
ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs
ACPI/PCI: pci_link: penalize SCI correctly
ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stages
* acpi-apei-fixes:
ACPI / APEI: Fix incorrect return value of ghes_proc()
In the code path of acpi_ev_initialize_region(), there is namespace
modification code unlocked. This patch tunes the code to make sure
such modification are always locked.
Fixes: 74f51b80a0 (ACPICA: Namespace: Fix dynamic table loading issues)
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is a lock unbalanced exit path in acpi_ds_initialize_method(),
this patch corrects it.
Fixes: 441ad11d07 (ACPICA: Dispatcher: Fix a mutex issue for method auto serialization)
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The last step of the method termination should be the end of the method
serialization. Otherwise, the steps happening after it will face the race
issues that cannot be protected by the method serialization mechanism.
This patch fixes this issue by moving the per-method-object deletion code
prior than the end of the method serialization. Otherwise, the possible
race issues may result in AE_ALREADY_EXISTS error in a parallel
environment.
Fixes: 74f51b80a0 (ACPICA: Namespace: Fix dynamic table loading issues)
Reported-and-tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 103544d869 ("ACPI,PCI,IRQ: reduce resource requirements")
replaced the addition of PIRQ_PENALTY_PCI_USING in acpi_pci_link_allocate()
with an addition in acpi_irq_pci_sharing_penalty(), but f7eca374f0
("ACPI,PCI,IRQ: separate ISA penalty calculation") removed the use
of acpi_irq_pci_sharing_penalty() for ISA IRQs.
Therefore, PIRQ_PENALTY_PCI_USING is missing from ISA IRQs used by
interrupt links. Include that penalty by adding it in the
acpi_pci_link_allocate() path.
Fixes: f7eca374f0 (ACPI,PCI,IRQ: separate ISA penalty calculation)
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ondrej reported that IRQs stopped working in v4.7 on several
platforms. A typical scenario, from Ondrej's VT82C694X/694X, is:
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: No IRQ available for PCI Interrupt Link [LNKA]
8139too 0000:00:0f.0: PCI INT A: no GSI
We're using PIC routing, so acpi_irq_balance == 0, and LNKA is already
active at IRQ 11. In that case, acpi_pci_link_allocate() only tries
to use the active IRQ (IRQ 11) which also happens to be the SCI.
We should penalize the SCI by PIRQ_PENALTY_PCI_USING, but
irq_get_trigger_type(11) returns something other than
IRQ_TYPE_LEVEL_LOW, so we penalize it by PIRQ_PENALTY_ISA_ALWAYS
instead, which makes acpi_pci_link_allocate() assume the IRQ isn't
available and give up.
Add acpi_penalize_sci_irq() so platforms can tell us the SCI IRQ,
trigger, and polarity directly and we don't have to depend on
irq_get_trigger_type().
Fixes: 103544d869 (ACPI,PCI,IRQ: reduce resource requirements)
Link: http://lkml.kernel.org/r/201609251512.05657.linux@rainbow-software.org
Reported-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Tested-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We do not want to store the SCI penalty in the acpi_isa_irq_penalty[]
table because acpi_isa_irq_penalty[] only holds ISA IRQ penalties and
there's no guarantee that the SCI is an ISA IRQ. We add in the SCI
penalty as a special case in acpi_irq_get_penalty().
But if we called acpi_penalize_isa_irq() or acpi_irq_penalty_update()
for an SCI that happened to be an ISA IRQ, they stored the SCI
penalty (part of the acpi_irq_get_penalty() return value) in
acpi_isa_irq_penalty[]. Subsequent calls to acpi_irq_get_penalty()
returned a penalty that included *two* SCI penalties.
Fixes: 103544d869 (ACPI,PCI,IRQ: reduce resource requirements)
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit eb8b2194200867dec9ba38e5ab98b5b8ef262945
Moved to acpixf.h with the rest of the configuration globals.
Link: https://github.com/acpica/acpica/commit/eb8b2194
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 4b367408659af08fd44839866ec301285284e6f4
Fixes a problem with complex expressions where an illegal mix
of legacy ASL and ASL+ could be emitted.
Adds new support for ASLTS that disables some disassembler
optimizations could be changed during a conversion to ASL+.
These expressions are now emitted in legacy ASL instead
of ASL+.
Link: https://github.com/acpica/acpica/commit/4b367408
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 9f83b34cb172549c20f18663bc7460fb4145a75b
increase loop limit to accomodate faster processors. From 64k loops max
to 1 million.
Link: https://github.com/acpica/acpica/commit/9f83b34c
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 1d435008fd9ea34768df8862de9cb6fff69650f6
Only emit an extra newline for acpiexec.
Link: https://github.com/acpica/acpica/commit/1d435008
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix an unused function warning that started to appear after recent
changes in the ACPI EC driver (Eric Biggers).
- Fix the KERN_CONT usage in acpi_os_vprintf() that has become
(particularly) annoying recently (Joe Perches).
- Fix the fan status checking in the ACPI fan driver to avoid
returning incorrect error codes sometimes (Srinivas Pandruvada).
- Fix the ACPI Processor Aggregator driver (PAD) to always let the
special processor_aggregator driver from Xen take over when
running as Xen dom0 (Juergen Gross).
- Update the handling of reference device properties in ACPI by
allowing empty rows ("holes") to appear in reference property
lists (Mika Westerberg).
- Add a new MAINTAINERS entry for ACPI on ARM64 (Lorenzo Pieralisi).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=vpTd
-----END PGP SIGNATURE-----
Merge tag 'acpi-extra-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"This includes a couple of fixes needed after recent changes, two ACPI
driver fixes (fan and "Processor Aggregator"), an update of the ACPI
device properties handling code and a new MAINTAINERS entry for ACPI
on ARM64.
Specifics:
- Fix an unused function warning that started to appear after recent
changes in the ACPI EC driver (Eric Biggers).
- Fix the KERN_CONT usage in acpi_os_vprintf() that has become
(particularly) annoying recently (Joe Perches).
- Fix the fan status checking in the ACPI fan driver to avoid
returning incorrect error codes sometimes (Srinivas Pandruvada).
- Fix the ACPI Processor Aggregator driver (PAD) to always let the
special processor_aggregator driver from Xen take over when running
as Xen dom0 (Juergen Gross).
- Update the handling of reference device properties in ACPI by
allowing empty rows ("holes") to appear in reference property lists
(Mika Westerberg).
- Add a new MAINTAINERS entry for ACPI on ARM64 (Lorenzo Pieralisi)"
* tag 'acpi-extra-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
acpi_os_vprintf: Use printk_get_level() to avoid unnecessary KERN_CONT
ACPI / PAD: don't register acpi_pad driver if running as Xen dom0
ACPI / property: Allow holes in reference properties
MAINTAINERS: Add ARM64-specific ACPI maintainers entry
ACPI / EC: Fix unused function warning when CONFIG_PM_SLEEP=n
ACPI / fan: Fix error reading cur_state
acpi_os_vprintf currently always uses a KERN_CONT prefix which may be
followed immediately by a proper KERN_<LEVEL>. Check if the buffer
already has a KERN_<LEVEL> at the start of the buffer and avoid the
unnecessary KERN_CONT.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When running as Xen dom0 a special processor_aggregator driver is
needed. Don't register the standard driver in this case.
Without that check an error message:
"Error: Driver 'processor_aggregator' is already registered,
aborting..."
will be displayed.
Signed-off-by: Juergen Gross <jgross@suse.com>
[ rjw: Minor fixups ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull thermal managament updates from Zhang Rui:
- Enhance thermal "userspace" governor to export the reason when a
thermal event is triggered and delivered to user space. From Srinivas
Pandruvada
- Introduce a single TSENS thermal driver for the different versions of
the TSENS IP that exist, on different qcom msm/apq SoCs'. Support for
msm8916, msm8960, msm8974 and msm8996 families is also added. From
Rajendra Nayak
- Introduce hardware-tracked trip points support to the device tree
thermal sensor framework. The framework supports an arbitrary number
of trip points. Whenever the current temperature is changed, the trip
points immediately below and above the current temperature are found,
driver callback is invoked to program the hardware to get notified
when either of the two trip points are triggered. Hardware-tracked
trip points support for rockchip thermal driver is also added at the
same time. From Sascha Hauer, Caesar Wang
- Introduce a new thermal driver, which enables TMU (Thermal Monitor
Unit) on QorIQ platform. From Jia Hongtao
- Introduce a new thermal driver for Maxim MAX77620. From Laxman
Dewangan
- Introduce a new thermal driver for Intel platforms using WhiskeyCove
PMIC. From Bin Gao
- Add mt2701 chip support to MTK thermal driver. From Dawei Chien
- Enhance Tegra thermal driver to enable soctherm node and set
"critical", "hot" trips, for Tegra124, Tegra132, Tegra210. From Wei
Ni
- Add resume support for tango thermal driver. From Marc Gonzalez
- several small fixes and improvements for rockchip, qcom, imx, rcar,
mtk thermal drivers and thermal core code. From Caesar Wang, Keerthy,
Rocky Hao, Wei Yongjun, Peter Robinson, Bui Duc Phuc, Axel Lin, Hugh
Kang
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (48 commits)
thermal: int3403: Process trip change notification
thermal: int340x: New Interface to read trip and notify
thermal: user_space gov: Add additional information in uevent
thermal: Enhance thermal_zone_device_update for events
arm64: tegra: set hot trips for Tegra210
arm64: tegra: set critical trips for Tegra210
arm64: tegra: add soctherm node for Tegra210
arm64: tegra: set hot trips for Tegra132
arm64: tegra: set critical trips for Tegra132
arm64: tegra: use tegra132-soctherm for Tegra132
arm: tegra: set hot trips for Tegra124
arm: tegra: set critical trips for Tegra124
thermal: tegra: add hw-throttle for Tegra132
thermal: tegra: add hw-throttle function
of: Add bindings of hw throttle for Tegra soctherm
thermal: mtk_thermal: Check return value of devm_thermal_zone_of_sensor_register
thermal: Add Mediatek thermal driver for mt2701.
dt-bindings: thermal: Add binding document for Mediatek thermal controller
thermal: max77620: Add thermal driver for reporting junction temp
thermal: max77620: Add DT binding doc for thermal driver
...
DT allows holes or empty phandles for references. This is used for example
in SPI subsystem where some chip selects are native and others are regular
GPIOs. In ACPI _DSD we currently do not support this but instead the
preceding reference consumes all following integer arguments.
For example we would like to support something like the below ASL fragment
for SPI:
Package () {
"cs-gpios",
Package () {
^GPIO, 19, 0, 0, // GPIO CS0
0, // Native CS
^GPIO, 20, 0, 0, // GPIO CS1
}
}
The zero in the middle means "no entry" or NULL reference. To support this
we change acpi_data_get_property_reference() to take firmware node and
num_args as argument and rename it to __acpi_node_get_property_reference().
The function returns -ENOENT if the given index resolves to "no entry"
reference and -ENODATA when there are no more entries in the property.
We then add static inline wrapper acpi_node_get_property_reference() that
passes MAX_ACPI_REFERENCE_ARGS as num_args to support the existing
behaviour which some drivers have been relying on.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PMEM sub-division support: Allow a single PMEM region to be divided
into multiple namespaces. Originally, ~2 years ago, it was thought that
partitions of a /dev/pmemX block device could handle sub-allocations of
persistent memory for different use cases. With the decision to not
support DAX mappings of raw block-devices, and the genesis of
device-dax, the need for having multiple pmem-namespace per region has
grown.
* Device-DAX unified inode: In support of dynamic-resizing of a
device-dax instance the kernel arranges for all mappings of a
device-dax node to share the same inode. This allows unmap / truncate /
invalidation events to affect all instances of the device similar to the
behavior of mmap on block devices.
* Hardware error scrubbing reworks: The original address-range-scrub +
badblocks tracking solution allowed clearing entries at the individual
namespace level, but it failed to clear the internal list of media
errors maintained at the bus level. The result was that the next scrub
or namespace disable/re-enable event would restore the cleared
badblocks, but now that is fixed. The v4.8 kernel introduced an
auto-scrub-on-machine-check behavior to repopulate the badblocks list.
Now, in v4.9, the auto-scrub behavior can be disabled and simply arrange
for the error reported in the machine-check to be added to the list.
* DIMM health-event notification support: ACPI 6.1 defines a
notification event code that can be send to ACPI NVDIMM devices. A
poll(2) capable file descriptor for these events can be obtained from
the nmemX/nfit/flags sysfs-attribute of a libnvdimm memory device.
* Miscellaneous fixes: NVDIMM-N probe error, device-dax build error, and
a change to dedup the flush hint list to not flush the memory controller
more than necessary.
-----BEGIN PGP SIGNATURE-----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=SenK
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Aside from the recently added pmem sub-division support these have
been in -next for several releases with no reported issues. The sub-
division support was included in next-20161010 with no reported
issues. It passes all unit tests including new tests for all the new
functionality below.
Summary:
- PMEM sub-division support: Allow a single PMEM region to be divided
into multiple namespaces. Originally, ~2 years ago, it was thought
that partitions of a /dev/pmemX block device could handle
sub-allocations of persistent memory for different use cases. With
the decision to not support DAX mappings of raw block-devices, and
the genesis of device-dax, the need for having multiple
pmem-namespace per region has grown.
- Device-DAX unified inode: In support of dynamic-resizing of a
device-dax instance the kernel arranges for all mappings of a
device-dax node to share the same inode. This allows unmap /
truncate / invalidation events to affect all instances of the
device similar to the behavior of mmap on block devices.
- Hardware error scrubbing reworks: The original address-range-scrub
and badblocks tracking solution allowed clearing entries at the
individual namespace level, but it failed to clear the internal
list of media errors maintained at the bus level. The result was
that the next scrub or namespace disable/re-enable event would
restore the cleared badblocks, but now that is fixed. The v4.8
kernel introduced an auto-scrub-on-machine-check behavior to
repopulate the badblocks list. Now, in v4.9, the auto-scrub
behavior can be disabled and simply arrange for the error reported
in the machine-check to be added to the list.
- DIMM health-event notification support: ACPI 6.1 defines a
notification event code that can be send to ACPI NVDIMM devices. A
poll(2) capable file descriptor for these events can be obtained
from the nmemX/nfit/flags sysfs-attribute of a libnvdimm memory
device.
- Miscellaneous fixes: NVDIMM-N probe error, device-dax build error,
and a change to dedup the flush hint list to not flush the memory
controller more than necessary"
* tag 'libnvdimm-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (39 commits)
/dev/dax: fix Kconfig dependency build breakage
dax: use correct dev_t value
dax: convert devm_create_dax_dev to PTR_ERR
libnvdimm, namespace: allow creation of multiple pmem-namespaces per region
libnvdimm, namespace: lift single pmem limit in scan_labels()
libnvdimm, namespace: filter out of range labels in scan_labels()
libnvdimm, namespace: enable allocation of multiple pmem namespaces
libnvdimm, namespace: update label implementation for multi-pmem
libnvdimm, namespace: expand pmem device naming scheme for multi-pmem
libnvdimm, region: update nd_region_available_dpa() for multi-pmem support
libnvdimm, namespace: sort namespaces by dpa at init
libnvdimm, namespace: allow multiple pmem-namespaces per region at scan time
tools/testing/nvdimm: support for sub-dividing a pmem region
libnvdimm, namespace: unify blk and pmem label scanning
libnvdimm, namespace: refactor uuid_show() into a namespace_to_uuid() helper
libnvdimm, label: convert label tracking to a linked list
libnvdimm, region: move region-mapping input-paramters to nd_mapping_desc
nvdimm: reduce duplicated wpq flushes
libnvdimm: clear the internal poison_list when clearing badblocks
pmem: reduce kmap_atomic sections to the memcpys only
...
On some platforms with ACPI4 variable speed fan, reading cur_state from
cooling device returns "invalid value" error. This confuses user space
applications.
This issue occurs as the current driver doesn't take account of
"FineGrainControl" from _FIF(Fan Information). When the "FineGrainControl"
is set, _FSL(FSL Set Level) takes argument as a percent, which doesn't
have to match from any control value from _FPS(Fan Performance States).
It is also possible that the Fan is not actually running at the requested
speed returning a lower speed.
On some platforms the BIOS is setting fan speed to a level during boot,
which will not have an exact match to _FPS control values. The current
implementation will treat this level as invalid value.
The simple change is to atleast return state corresponding to a maximum
control value in the _FPS compared to the current level.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When doing an nmi backtrace of many cores, most of which are idle, the
output is a little overwhelming and very uninformative. Suppress
messages for cpus that are idling when they are interrupted and just
emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN".
We do this by grouping all the cpuidle code together into a new
.cpuidle.text section, and then checking the address of the interrupted
PC to see if it lies within that section.
This commit suitably tags x86 and tile idle routines, and only adds in
the minimal framework for other architectures.
Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm]
Tested-by: Petr Mladek <pmladek@suse.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the big TTY and Serial patch set for 4.9-rc1.
It also includes some drivers/dma/ changes, as those were needed by some
serial drivers, and they were all acked by the DMA maintainer. Also in
here is the long-suffering ACPI SPCR patchset, which was passed around
from maintainer to maintainer like a hot-potato. Seems I was the
sucker^Wlucky one. All of those patches have been acked by the various
subsystem maintainers as well.
All of this has been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iFYEABECABYFAlfyNjEPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspwIcAn2uN
qCD8xQJ0Cs61hD1nUzhNygG8AJ94I4zz/fPGpyh/CtJfLQwtUdLhNA==
=Rken
-----END PGP SIGNATURE-----
Merge tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial updates from Greg KH:
"Here is the big tty and serial patch set for 4.9-rc1.
It also includes some drivers/dma/ changes, as those were needed by
some serial drivers, and they were all acked by the DMA maintainer.
Also in here is the long-suffering ACPI SPCR patchset, which was
passed around from maintainer to maintainer like a hot-potato. Seems I
was the sucker^Wlucky one. All of those patches have been acked by the
various subsystem maintainers as well.
All of this has been in linux-next with no reported issues"
* tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (111 commits)
Revert "serial: pl011: add console matching function"
MAINTAINERS: update entry for atmel_serial driver
serial: pl011: add console matching function
ARM64: ACPI: enable ACPI_SPCR_TABLE
ACPI: parse SPCR and enable matching console
of/serial: move earlycon early_param handling to serial
Revert "drivers/tty: Explicitly pass current to show_stack"
tty: amba-pl011: Don't complain on -EPROBE_DEFER when no irq
nios2: dts: 10m50: Add tx-threshold parameter
serial: 8250: Set Altera 16550 TX FIFO Threshold
serial: 8250: of: Load TX FIFO Threshold from DT
Documentation: dt: serial: Add TX FIFO threshold parameter
drivers/tty: Explicitly pass current to show_stack
serial: imx: Fix DCD reading
serial: stm32: mark symbols static where possible
serial: xuartps: Add some register initialisation to cdns_early_console_setup()
serial: xuartps: Removed unwanted checks while reading the error conditions
serial: xuartps: Rewrite the interrupt handling logic
serial: stm32: use mapbase instead of membase for DMA
tty/serial: atmel: fix fractional baud rate computation
...
Pull CPU hotplug updates from Thomas Gleixner:
"Yet another batch of cpu hotplug core updates and conversions:
- Provide core infrastructure for multi instance drivers so the
drivers do not have to keep custom lists.
- Convert custom lists to the new infrastructure. The block-mq custom
list conversion comes through the block tree and makes the diffstat
tip over to more lines removed than added.
- Handle unbalanced hotplug enable/disable calls more gracefully.
- Remove the obsolete CPU_STARTING/DYING notifier support.
- Convert another batch of notifier users.
The relayfs changes which conflicted with the conversion have been
shipped to me by Andrew.
The remaining lot is targeted for 4.10 so that we finally can remove
the rest of the notifiers"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
cpufreq: Fix up conversion to hotplug state machine
blk/mq: Reserve hotplug states for block multiqueue
x86/apic/uv: Convert to hotplug state machine
s390/mm/pfault: Convert to hotplug state machine
mips/loongson/smp: Convert to hotplug state machine
mips/octeon/smp: Convert to hotplug state machine
fault-injection/cpu: Convert to hotplug state machine
padata: Convert to hotplug state machine
cpufreq: Convert to hotplug state machine
ACPI/processor: Convert to hotplug state machine
virtio scsi: Convert to hotplug state machine
oprofile/timer: Convert to hotplug state machine
block/softirq: Convert to hotplug state machine
lib/irq_poll: Convert to hotplug state machine
x86/microcode: Convert to hotplug state machine
sh/SH-X3 SMP: Convert to hotplug state machine
ia64/mca: Convert to hotplug state machine
ARM/OMAP/wakeupgen: Convert to hotplug state machine
ARM/shmobile: Convert to hotplug state machine
arm64/FP/SIMD: Convert to hotplug state machine
...
Pull irq updates from Thomas Gleixner:
"The irq departement proudly presents:
- A rework of the core infrastructure to optimally spread interrupt
for multiqueue devices. The first version was a bit naive and
failed to take thread siblings and other details into account.
Developed in cooperation with Christoph and Keith.
- Proper delegation of softirqs to ksoftirqd, so if ksoftirqd is
active then no further softirq processsing on interrupt return
happens. Otherwise we try to delegate and still run another batch
of network packets in the irq return path, which then tries to
delegate to ksoftirqd .....
- A proper machine parseable sysfs based alternative for
/proc/interrupts.
- ACPI support for the GICV3-ITS and ARM interrupt remapping
- Two new irq chips from the ARM SoC zoo: STM32-EXTI and MVEBU-PIC
- A new irq chip for the JCore (SuperH)
- The usual pile of small fixlets in core and irqchip drivers"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
softirq: Let ksoftirqd do its job
genirq: Make function __irq_do_set_handler() static
ARM/dts: Add EXTI controller node to stm32f429
ARM/STM32: Select external interrupts controller
drivers/irqchip: Add STM32 external interrupts support
Documentation/dt-bindings: Document STM32 EXTI controller bindings
irqchip/mips-gic: Use for_each_set_bit to iterate over local IRQs
pci/msi: Retrieve affinity for a vector
genirq/affinity: Remove old irq spread infrastructure
genirq/msi: Switch to new irq spreading infrastructure
genirq/affinity: Provide smarter irq spreading infrastructure
genirq/msi: Add cpumask allocation to alloc_msi_entry
genirq: Expose interrupt information through sysfs
irqchip/gicv3-its: Use MADT ITS subtable to do PCI/MSI domain initialization
irqchip/gicv3-its: Factor out PCI-MSI part that might be reused for ACPI
irqchip/gicv3-its: Probe ITS in the ACPI way
irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPI
irqchip/gicv3-its: Cleanup for ITS domain initialization
PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI table
ACPI: Add new IORT functions to support MSI domain handling
...
Pull x86 apic updates from Ingo Molnar:
"The main changes are:
- Persistent CPU/node numbering across CPU hotplug/unplug events.
This is a pretty involved series of changes that first fetches all
the information during bootup and then uses it for the various
hotplug/unplug methods. (Gu Zheng, Dou Liyang)
- IO-APIC hot-add/remove fixes and enhancements. (Rui Wang)
- ... various fixes, cleanups and enhancements"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/apic: Fix silent & fatal merge conflict in __generic_processor_info()
acpi: Fix broken error check in map_processor()
acpi: Validate processor id when mapping the processor
acpi: Provide mechanism to validate processors in the ACPI tables
x86/acpi: Set persistent cpuid <-> nodeid mapping when booting
x86/acpi: Enable MADT APIs to return disabled apicids
x86/acpi: Introduce persistent storage for cpuid <-> apicid mapping
x86/acpi: Enable acpi to register all possible cpus at boot time
x86/numa: Online memory-less nodes at boot time
x86/apic: Get rid of apic_version[] array
x86/apic: Order irq_enter/exit() calls correctly vs. ack_APIC_irq()
x86/ioapic: Ignore root bridges without a companion ACPI device
x86/apic: Update comment about disabling processor focus
x86/smpboot: Check APIC ID before setting up default routing
x86/ioapic: Fix IOAPIC failing to request resource
x86/ioapic: Fix lost IOAPIC resource after hot-removal and hotadd
x86/ioapic: Fix setup_res() failing to get resource
x86/ioapic: Support hot-removal of IOAPICs present during boot
x86/ioapic: Change prototype of acpi_ioapic_add()
x86/apic, ACPI: Fix incorrect assignment when handling apic/x2apic entries
...
- Update of the ACPICA code in the kernel to upstream revision 20160831 with
the following major changes:
* New mechanism for GPE masking.
* Fixes for issues related to the LoadTable operator and table loading.
* Fixes for issues related to so-called module-level code (MLC), that is
AML that doesn't belong to any methods.
* Change of the return value of the _OSI method to reflect the Windows
behavior.
* GAS (Generic Address Structure) support fix related to 32-bit FADT
addresses.
* Elimination of unnecessary FADT version 2 support.
* ACPI tools fixes and cleanups.
From Bob Moore, Lv Zheng, and Jung-uk Kim.
- ACPI sysfs interface updates to fix GPE handling (on top of the new GPE
masking mechanism in ACPICA) and issues related to table loading (Lv Zheng).
- New watchdog driver based on the ACPI WDAT (ACPI Watchdog Action Table),
needed on some platforms to replace the iTCO watchdog that doesn't work there
and related updates of the intel_pmc_ipc, i2c/i801 and MFD/lcp_ich drivers
(Mika Westerberg).
- Driver core fix to prevent it from leaking secondary fwnode objects during
device removal (Lukas Wunner).
- New definitions of built-in properties for UART in ACPI-based x86 SoC drivers
and a 8250_dw driver quirk for the APM X-Gene SoC (Heikki Krogerus).
- New device ID for the Vulcan SPI controller and constification of local
strucures in the AMD SoC (APD) ACPI driver (Kamlakant Patel, Julia Lawall).
- Fix for a bug causing the allocation of PCI resorces to fail if
ACPI-enumerated child platform devices are registered below the PCI
devices in question (Mika Westerberg).
- Change of the default polarity for PCI legacy IRQs to high on systems
booting wth ACPI on platforms with a GIC interrupt controller model
fixing the discrepancy between the specification and HW behavior (Lorenzo
Pieralisi).
- Fixes for the handling of system suspend/resume in the ACPI EC driver and
update of that driver to make it cope with the cases when the EC device
defined in the ECDT has to be used throughout the entire system life cycle
(Lv Zheng).
- Update of the ACPI CPPC library to allow it to batch requests sent over the
PCC channel (to reduce overhead), to support the fixed functional hardware
(FFH) CPPC registers access type, to notify the mailbox framework about TX
completions when the interrupt flag is set for the PCC mailbox, and to
support HW-Reduced Communication Subspace type 2 (Ashwin Chaugule, Prashanth
Prakash, Srinivas Pandruvada, Hoan Tran).
- ACPI button driver fix and documentation update related to the handling of
laptop lids (Lv Zheng).
- ACPI battery driver initialization fix (Carlos Garnacho).
- ACPI GPIO enumeration documentation update (Mika Westerberg).
- Assorted updates of the core ACPI bus type code (Lukas Wunner, Lv Zheng).
- Assorted cleanups of the ACPI table parsing code and the x86-specific ACPI
code (Al Stone).
- Fixes for assorted ACPI-related issues found in linux-next (Wei Yongjun).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=xDOQ
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"First off, the ACPICA code in the kernel is updated to upstream
revision 20160831 that brings in a few bug fixes and cleanups. In
particular, it is possible to mask GPEs now (and the sysfs interface
for GPE control is fixed on top of that), problems related to the
table loading mechanism are fixed and all code related to FADT version
2 (which has never been part of the ACPI specification) is dropped.
On the new features front, there is a new watchdog driver based on the
ACPI WDAT (ACPI Watchdog Action Table), needed on some platforms to
replace the iTCO watchdog that doesn't work there, and some UART
devices get new definitions of built-in properties (to be accessed via
the generic device properties API).
Also, included is a fix for an ACPI-related PCI resorces allocation
issue and a few problems in the EC driver and in the button and
battery drivers are fixed.
In addition to that, the ACPI CPPC library is updated to make batching
of requests sent over the PCC channel possible (which reduces the PCC
usage overhead substantially in some cases) and to support functional
fixed hardware (FFH) type of CPPC registers access (which will allow
CPPC to be used on x86 too in the future).
As usual, there are some assorted fixes and cleanups too.
Specifics:
- Update of the ACPICA code in the kernel to upstream revision
20160831 with the following major changes:
* New mechanism for GPE masking.
* Fixes for issues related to the LoadTable operator and table
loading.
* Fixes for issues related to so-called module-level code (MLC),
that is AML that doesn't belong to any methods.
* Change of the return value of the _OSI method to reflect the
Windows behavior.
* GAS (Generic Address Structure) support fix related to 32-bit
FADT addresses.
* Elimination of unnecessary FADT version 2 support.
* ACPI tools fixes and cleanups.
From Bob Moore, Lv Zheng, and Jung-uk Kim.
- ACPI sysfs interface updates to fix GPE handling (on top of the new
GPE masking mechanism in ACPICA) and issues related to table
loading (Lv Zheng).
- New watchdog driver based on the ACPI WDAT (ACPI Watchdog Action
Table), needed on some platforms to replace the iTCO watchdog that
doesn't work there and related updates of the intel_pmc_ipc,
i2c/i801 and MFD/lcp_ich drivers (Mika Westerberg).
- Driver core fix to prevent it from leaking secondary fwnode objects
during device removal (Lukas Wunner).
- New definitions of built-in properties for UART in ACPI-based x86
SoC drivers and a 8250_dw driver quirk for the APM X-Gene SoC
(Heikki Krogerus).
- New device ID for the Vulcan SPI controller and constification of
local strucures in the AMD SoC (APD) ACPI driver (Kamlakant Patel,
Julia Lawall).
- Fix for a bug causing the allocation of PCI resorces to fail if
ACPI-enumerated child platform devices are registered below the PCI
devices in question (Mika Westerberg).
- Change of the default polarity for PCI legacy IRQs to high on
systems booting wth ACPI on platforms with a GIC interrupt
controller model fixing the discrepancy between the specification
and HW behavior (Lorenzo Pieralisi).
- Fixes for the handling of system suspend/resume in the ACPI EC
driver and update of that driver to make it cope with the cases
when the EC device defined in the ECDT has to be used throughout
the entire system life cycle (Lv Zheng).
- Update of the ACPI CPPC library to allow it to batch requests sent
over the PCC channel (to reduce overhead), to support the fixed
functional hardware (FFH) CPPC registers access type, to notify the
mailbox framework about TX completions when the interrupt flag is
set for the PCC mailbox, and to support HW-Reduced Communication
Subspace type 2 (Ashwin Chaugule, Prashanth Prakash, Srinivas
Pandruvada, Hoan Tran).
- ACPI button driver fix and documentation update related to the
handling of laptop lids (Lv Zheng).
- ACPI battery driver initialization fix (Carlos Garnacho).
- ACPI GPIO enumeration documentation update (Mika Westerberg).
- Assorted updates of the core ACPI bus type code (Lukas Wunner, Lv
Zheng).
- Assorted cleanups of the ACPI table parsing code and the
x86-specific ACPI code (Al Stone).
- Fixes for assorted ACPI-related issues found in linux-next (Wei
Yongjun)"
* tag 'acpi-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (98 commits)
ACPI / documentation: Use recommended name in GPIO property names
watchdog: wdat_wdt: Fix warning for using 0 as NULL
watchdog: wdat_wdt: fix return value check in wdat_wdt_probe()
platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists
i2c: i801: Do not create iTCO watchdog when WDAT table exists
mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists
ACPI / bus: Adjust ACPI subsystem initialization for new table loading mode
ACPICA: Parser: Fix a regression in LoadTable support
ACPICA: Tables: Fix "UNLOAD" code path lock issues
ACPI / watchdog: Add support for WDAT hardware watchdog
ACPI / platform: Pay attention to parent device's resources
PCI: Add pci_find_resource()
ACPI / CPPC: Support PCC with interrupt flag
ACPI / sysfs: Update sysfs signature handling code
ACPI / sysfs: Fix an issue for LoadTable opcode
ACPICA: Tables: Fix a regression in acpi_tb_find_table()
ACPI / tables: Remove duplicated include from tables.c
ACPI / APD: constify local structures
x86: ACPI: make variable names clearer in acpi_parse_madt_lapic_entries()
x86: ACPI: remove extraneous white space after semicolon
...
* acpi-wdat:
watchdog: wdat_wdt: Fix warning for using 0 as NULL
watchdog: wdat_wdt: fix return value check in wdat_wdt_probe()
platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists
i2c: i801: Do not create iTCO watchdog when WDAT table exists
mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists
ACPI / watchdog: Add support for WDAT hardware watchdog
* acpi-ec:
ACPI / EC: Fix issues related to boot_ec
ACPI / EC: Fix a gap that ECDT EC cannot handle EC events
ACPI / EC: Fix a memory leakage issue in acpi_ec_add()
ACPI / EC: Cleanup first_ec/boot_ec code
ACPI / EC: Enable event freeze mode to improve event handling for suspend process
ACPI / EC: Add PM operations to improve event handling for suspend process
ACPI / EC: Add PM operations to improve event handling for resume process
ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled
ACPI / EC: Add EC_FLAGS_QUERY_ENABLED to reveal a hidden logic
ACPI / EC: Add PM operations for suspend/resume noirq stage
* acpi-x86:
x86: ACPI: make variable names clearer in acpi_parse_madt_lapic_entries()
x86: ACPI: remove extraneous white space after semicolon
* acpi-cppc:
ACPI / CPPC: Support PCC with interrupt flag
ACPI / CPPC: Add prefix cppc to cpudata structure name
ACPI / CPPC: Add support for functional fixed hardware address
ACPI / CPPC: Don't return on CPPC probe failure
ACPI / CPPC: Allow build with ACPI_CPU_FREQ_PSS config
ACPI / CPPC: check for error bit in PCC status field
ACPI / CPPC: move all PCC related information into pcc_data
ACPI / CPPC: add sysfs support to compute delivered performance
ACPI / CPPC: set a non-zero value for transition_latency
ACPI / CPPC: support for batching CPPC requests
ACPI / CPPC: acquire pcc_lock only while accessing PCC subspace
ACPI / CPPC: restructure read/writes for efficient sys mapped reg ops
mailbox: pcc: Support HW-Reduced Communication Subspace type 2
* acpi-soc:
ACPI / APD: constify local structures
ACPI / APD: Add device HID for Vulcan SPI controller
