In the common case where a name is much smaller than PATH_MAX, an extra
allocation for struct filename is unnecessary. Before allocating a
separate one, try to embed the struct filename inside the buffer first. If
it turns out that that's not long enough, then fall back to allocating a
separate struct filename and redoing the copy.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Keep a pointer to the audit_names "slot" in struct filename.
Have all of the audit_inode callers pass a struct filename ponter to
audit_inode instead of a string pointer. If the aname field is already
populated, then we can skip walking the list altogether and just use it
directly.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
...and fix up the callers. For do_file_open_root, just declare a
struct filename on the stack and fill out the .name field. For
do_filp_open, make it also take a struct filename pointer, and fix up its
callers to call it appropriately.
For filp_open, add a variant that takes a struct filename pointer and turn
filp_open into a wrapper around it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently, if we call getname() on a userland string more than once,
we'll get multiple copies of the string and multiple audit_names
records.
Add a function that will allow the audit_names code to satisfy getname
requests using info from the audit_names list, avoiding a new allocation
and audit_names records.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
getname() is intended to copy pathname strings from userspace into a
kernel buffer. The result is just a string in kernel space. It would
however be quite helpful to be able to attach some ancillary info to
the string.
For instance, we could attach some audit-related info to reduce the
amount of audit-related processing needed. When auditing is enabled,
we could also call getname() on the string more than once and not
need to recopy it from userspace.
This patchset converts the getname()/putname() interfaces to return
a struct instead of a string. For now, the struct just tracks the
string in kernel space and the original userland pointer for it.
Later, we'll add other information to the struct as it becomes
convenient.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
First, it's incorrect to call putname() after __getname_gfp() since the
bare __getname_gfp() call skips the auditing code, while putname()
doesn't.
mount_block_root allocates a PATH_MAX buffer via __getname_gfp, and then
calls get_fs_names to fill the buffer. That function can call
get_filesystem_list which assumes that that buffer is a full page in
size. On arches where PAGE_SIZE != 4k, then this could potentially
overrun.
In practice, it's hard to imagine the list of filesystem names even
approaching 4k, but it's best to be safe. Just allocate a page for this
purpose instead.
With this, we can also remove the __getname_gfp() definition since there
are no more callers.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In order to accomodate retrying path-based syscalls, we need to add a
new "type" argument to audit_inode_child. This will tell us whether
we're looking for a child entry that represents a create or a delete.
If we find a parent, don't automatically assume that we need to create a
new entry. Instead, use the information we have to try to find an
existing entry first. Update it if one is found and create a new one if
not.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently, this gets set mostly by happenstance when we call into
audit_inode_child. While that might be a little more efficient, it seems
wrong. If the syscall ends up failing before audit_inode_child ever gets
called, then you'll have an audit_names record that shows the full path
but has the parent inode info attached.
Fix this by passing in a parent flag when we call audit_inode that gets
set to the value of LOOKUP_PARENT. We can then fix up the pathname for
the audit entry correctly from the get-go.
While we're at it, clean up the no-op macro for audit_inode in the
!CONFIG_AUDITSYSCALL case.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For now, we just have two possibilities:
UNKNOWN: for a new audit_names record that we don't know anything about yet
NORMAL: for everything else
In later patches, we'll add other types so we can distinguish and update
records created under different circumstances.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Most of the callers get called with an inode and dentry in the reverse
order. The compiler then has to reshuffle the arg registers and/or
stack in order to pass them on to audit_inode_child.
Reverse those arguments for a micro-optimization.
Reported-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull pile 2 of vfs updates from Al Viro:
"Stuff in this one - assorted fixes, lglock tidy-up, death to
lock_super().
There'll be a VFS pile tomorrow (with patches from Jeff Layton,
sanitizing getname() and related parts of audit and preparing for
ESTALE fixes), but I'd rather push the stuff in this one ASAP - some
of the bugs closed here are quite unpleasant."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: bogus warnings in fs/namei.c
consitify do_mount() arguments
lglock: add DEFINE_STATIC_LGLOCK()
lglock: make the per_cpu locks static
lglock: remove unused DEFINE_LGLOCK_LOCKDEP()
MAX_LFS_FILESIZE definition for 64bit needs LL...
tmpfs,ceph,gfs2,isofs,reiserfs,xfs: fix fh_len checking
vfs: drop lock/unlock super
ufs: drop lock/unlock super
sysv: drop lock/unlock super
hpfs: drop lock/unlock super
fat: drop lock/unlock super
ext3: drop lock/unlock super
exofs: drop lock/unlock super
dup3: Return an error when oldfd == newfd.
fs: handle failed audit_log_start properly
fs: prevent use after free in auditing when symlink following was denied
Pull kbuild changes from Michal Marek:
"The main part of kbuild for v3.7 contains:
- Fix for scripts/Makefile.modpost to not choke on a '.ko' substring
in the build directory path
- Two warning fixes (modpost and main Makefile)
- __compiletime_error works also with gcc 4.3
- make tar{gz,bz2,xz}-pkg uses default compression settings instead
of saving as many bytes as possible (this should actually be in the
misc branch, I don't know why I applied it here)."
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
compiler-gcc4.h: correct verion check for __compiletime_error
modpost: Permit .GCC.command.line sections
Kbuild: use normal compression settings for tar*-pkg
scripts/Makefile.modpost: error in finding modules from .mod files.
kbuild: Remove useless warning while appending KCFLAGS
It includes:
- large updates for OMAP
- basic OMAP5 DSS support for DPI and DSI outputs
- large cleanups and restructuring
- some update to Exynos and da8xx-fb
- removal of the pnx4008 driver (arch removed)
- various other small patches
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.12 (GNU/Linux)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=EJUS
-----END PGP SIGNATURE-----
Merge tag 'fbdev-updates-for-3.7' of git://github.com/schandinat/linux-2.6
Pull fbdev updates from Florian Tobias Schandinat:
"This includes:
- large updates for OMAP
- basic OMAP5 DSS support for DPI and DSI outputs
- large cleanups and restructuring
- some update to Exynos and da8xx-fb
- removal of the pnx4008 driver (arch removed)
- various other small patches"
Fix up some trivial conflicts (mostly just include line changes, but
also some due to the renaming of the deferred work functions by Tejun).
* tag 'fbdev-updates-for-3.7' of git://github.com/schandinat/linux-2.6: (193 commits)
gbefb: fix compile error
video: mark nuc900fb_map_video_memory as __devinit
video/mx3fb: set .owner to prevent module unloading while being used
video: exynos_dp: use clk_prepare_enable and clk_disable_unprepare
drivers/video/exynos/exynos_mipi_dsi.c: fix error return code
drivers/video/savage/savagefb_driver.c: fix error return code
video: s3c-fb: use clk_prepare_enable and clk_disable_unprepare
da8xx-fb: save and restore LCDC context across suspend/resume cycle
da8xx-fb: add pm_runtime support
video/udlfb: fix line counting in fb_write
OMAPDSS: add missing include for string.h
OMAPDSS: DISPC: Configure color conversion coefficients for writeback
OMAPDSS: DISPC: Add manager like functions for writeback
OMAPDSS: DISPC: Configure writeback FIFOs
OMAPDSS: DISPC: Configure writeback specific parameters in dispc_wb_setup()
OMAPDSS: DISPC: Configure overlay-like parameters in dispc_wb_setup
OMAPDSS: DISPC: Add function to set channel in for writeback
OMAPDSS: DISPC: Don't set chroma resampling bit for writeback
OMAPDSS: DISPC: Downscale chroma if plane is writeback
OMAPDSS: DISPC: Configure input and output sizes for writeback
...
__attribute__((error(msg))) was introduced in gcc 4.3 (not 4.4) and as I
was unable to find any gcc bugs pertaining to it, I'm presuming that it
has functioned as advertised since 4.3.0.
Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull i2c-embedded changes from Wolfram Sang:
"The changes for i2c-embedded include:
- massive rework of the omap driver
- massive rework of the at91 driver. In fact, the old driver gets
removed; I am okay with this approach since the old driver was
depending on BROKEN and its limitations made it practically
unusable, so people used bitbanging instead. But even if there are
users, there is no platform_data or module parameter which would
need to be converted. It is just another driver doing I2C
transfers, just way better. Modifications of arch/arm/at91 related
files have proper acks from the maintainer.
- new driver for R-Car I2C
- devicetree and generic_clock conversions and fixes
- usual driver fixes and changes.
The rework patches have come a long way and lots of people have been
involved in creating/testing them. Most patches have been in
linux-next at least since 3.6-rc5. A few have been added in the last
week, I have to admit.
An unexpected (but welcome :)) peak in private life is the cause for
that. The "late" patches shouldn't cause any merge conflicts and I
will have a special eye on them during the stabilization phase. This
is an exception and I want to have the patches in place properly in
time again for the next kernels."
* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (44 commits)
MXS: Implement DMA support into mxs-i2c
i2c: add Renesas R-Car I2C driver
i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepare
ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints
i2c: nomadik: Add Device Tree support to the Nomadik I2C driver
i2c: algo: pca: Fix chip reset function for PCA9665
i2c: mpc: Wait for STOP to hit the bus
i2c: davinci: preparation for switch to common clock framework
omap-i2c: fix incorrect log message when using a device tree
i2c: omap: sanitize exit path
i2c: omap: switch over to autosuspend API
i2c: omap: remove unnecessary pm_runtime_suspended check
i2c: omap: switch to threaded IRQ support
i2c: omap: remove redundant status read
i2c: omap: get rid of the "complete" label
i2c: omap: resize fifos before each message
i2c: omap: simplify IRQ exit path
i2c: omap: always return IRQ_HANDLED
i2c: omap: simplify errata check
i2c: omap: bus: add a receiver flag
...
Merge misc fixes from Andrew Morton:
"Followups, fixes and some random stuff I found on the internet."
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (11 patches)
perf: fix duplicate header inclusion
memcg, kmem: fix build error when CONFIG_INET is disabled
rtc: kconfig: fix RTC_INTF defaults connected to RTC_CLASS
rapidio: fix comment
lib/kasprintf.c: use kmalloc_track_caller() to get accurate traces for kvasprintf
rapidio: update for destination ID allocation
rapidio: update asynchronous discovery initialization
rapidio: use msleep in discovery wait
mm: compaction: fix bit ranges in {get,clear,set}_pageblock_skip()
arch/powerpc/platforms/pseries/hotplug-memory.c: section removal cleanups
arch/powerpc/platforms/pseries/hotplug-memory.c: fix section handling code
Pull block IO update from Jens Axboe:
"Core block IO bits for 3.7. Not a huge round this time, it contains:
- First series from Kent cleaning up and generalizing bio allocation
and freeing.
- WRITE_SAME support from Martin.
- Mikulas patches to prevent O_DIRECT crashes when someone changes
the block size of a device.
- Make bio_split() work on data-less bio's (like trim/discards).
- A few other minor fixups."
Fixed up silent semantic mis-merge as per Mikulas Patocka and Andrew
Morton. It is due to the VM no longer using a prio-tree (see commit
6b2dbba8b6: "mm: replace vma prio_tree with an interval tree").
So make set_blocksize() use mapping_mapped() instead of open-coding the
internal VM knowledge that has changed.
* 'for-3.7/core' of git://git.kernel.dk/linux-block: (26 commits)
block: makes bio_split support bio without data
scatterlist: refactor the sg_nents
scatterlist: add sg_nents
fs: fix include/percpu-rwsem.h export error
percpu-rw-semaphore: fix documentation typos
fs/block_dev.c:1644:5: sparse: symbol 'blkdev_mmap' was not declared
blockdev: turn a rw semaphore into a percpu rw semaphore
Fix a crash when block device is read and block size is changed at the same time
block: fix request_queue->flags initialization
block: lift the initial queue bypass mode on blk_register_queue() instead of blk_init_allocated_queue()
block: ioctl to zero block ranges
block: Make blkdev_issue_zeroout use WRITE SAME
block: Implement support for WRITE SAME
block: Consolidate command flag and queue limit checks for merges
block: Clean up special command handling logic
block/blk-tag.c: Remove useless kfree
block: remove the duplicated setting for congestion_threshold
block: reject invalid queue attribute values
block: Add bio_clone_bioset(), bio_clone_kmalloc()
block: Consolidate bio_alloc_bioset(), bio_kmalloc()
...
Commit e1aab161e0 ("socket: initial cgroup code.") causes a build
error when CONFIG_INET is disabled in Linus' tree:
net/built-in.o: In function `sk_update_clone':
net/core/sock.c:1336: undefined reference to `sock_update_memcg'
sock_update_memcg() is only defined when CONFIG_INET is enabled, so fix
it by defining the dummy function without this option.
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The resource index for the mailboxes was incorrect.
Signed-off-by: Chad Reese <kreese@caviumnetworks.com>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Address comments provided by Andrew Morton:
https://lkml.org/lkml/2012/10/3/550
- Keeps consistent kerneldoc compatible comments style for new static
functions.
- Removes unnecessary complexity from destination ID allocation
routine.
- Uses kcalloc() for code clarity.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
{get,clear,set}_pageblock_skip() use incorrect bit ranges (please compare
to bit ranges used by {get,set}_pageblock_flags() used for migration
types) and can overwrite pageblock migratetype of the next pageblock in
the bitmap.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Features include:
- Remove CONFIG_EXPERIMENTAL dependency from NFSv4.1
Aside from the issues discussed at the LKS, distros are shipping
NFSv4.1 with all the trimmings.
- Fix fdatasync()/fsync() for the corner case of a server reboot.
- NFSv4 OPEN access fix: finally distinguish correctly between
open-for-read and open-for-execute permissions in all situations.
- Ensure that the TCP socket is closed when we're in CLOSE_WAIT
- More idmapper bugfixes
- Lots of pNFS bugfixes and cleanups to remove unnecessary state and
make the code easier to read.
- In cases where a pNFS read or write fails, allow the client to
resume trying layoutgets after two minutes of read/write-through-mds.
- More net namespace fixes to the NFSv4 callback code.
- More net namespace fixes to the NFSv3 locking code.
- More NFSv4 migration preparatory patches.
Including patches to detect network trunking in both NFSv4 and NFSv4.1
- pNFS block updates to optimise LAYOUTGET calls.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=uBk7
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Features include:
- Remove CONFIG_EXPERIMENTAL dependency from NFSv4.1
Aside from the issues discussed at the LKS, distros are shipping
NFSv4.1 with all the trimmings.
- Fix fdatasync()/fsync() for the corner case of a server reboot.
- NFSv4 OPEN access fix: finally distinguish correctly between
open-for-read and open-for-execute permissions in all situations.
- Ensure that the TCP socket is closed when we're in CLOSE_WAIT
- More idmapper bugfixes
- Lots of pNFS bugfixes and cleanups to remove unnecessary state and
make the code easier to read.
- In cases where a pNFS read or write fails, allow the client to
resume trying layoutgets after two minutes of read/write-
through-mds.
- More net namespace fixes to the NFSv4 callback code.
- More net namespace fixes to the NFSv3 locking code.
- More NFSv4 migration preparatory patches.
Including patches to detect network trunking in both NFSv4 and
NFSv4.1
- pNFS block updates to optimise LAYOUTGET calls."
* tag 'nfs-for-3.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (113 commits)
pnfsblock: cleanup nfs4_blkdev_get
NFS41: send real read size in layoutget
NFS41: send real write size in layoutget
NFS: track direct IO left bytes
NFSv4.1: Cleanup ugliness in pnfs_layoutgets_blocked()
NFSv4.1: Ensure that the layout sequence id stays 'close' to the current
NFSv4.1: Deal with seqid wraparound in the pNFS return-on-close code
NFSv4 set open access operation call flag in nfs4_init_opendata_res
NFSv4.1: Remove the dependency on CONFIG_EXPERIMENTAL
NFSv4 reduce attribute requests for open reclaim
NFSv4: nfs4_open_done first must check that GETATTR decoded a file type
NFSv4.1: Deal with wraparound when updating the layout "barrier" seqid
NFSv4.1: Deal with wraparound issues when updating the layout stateid
NFSv4.1: Always set the layout stateid if this is the first layoutget
NFSv4.1: Fix another refcount issue in pnfs_find_alloc_layout
NFSv4: don't put ACCESS in OPEN compound if O_EXCL
NFSv4: don't check MAY_WRITE access bit in OPEN
NFS: Set key construction data for the legacy upcall
NFSv4.1: don't do two EXCHANGE_IDs on mount
NFS: nfs41_walk_client_list(): re-lock before iterating
...
All legacy PWM providers have now been moved to the PWM subsystem. The
plan for 3.8 is to adapt all board files to provide a lookup table for
PWM devices in order to get rid of the global namespace. Subsequently,
users of the legacy pwm_request() and pwm_free() functions can be
migrated to the new pwm_get() and pwm_put() functions. Once this has
been completed, the legacy API and the compatibility code in the core
can be removed.
In addition to the above, these changes also add support for configuring
the polarity of a PWM signal (currently only supported on ECAP and
EHRPWM) and include a much needed rework of the i.MX driver. Managed
functions to obtain and release a PWM device (devm_pwm_get() and
devm_pwm_put()) have been added and the pwm-backlight driver has been
updated to use them. If the PWM subsystem hasn't been enabled, dummy
functions are provided that allow the subsystem to safely compile out.
Some common checks on input parameters have been moved to the core and
removed from the drivers. Finally, a small fix corrects the description
of the PWM specifier's second cell in the device tree representation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=MQ5V
-----END PGP SIGNATURE-----
Merge tag 'for-3.7-rc1' of git://gitorious.org/linux-pwm/linux-pwm
Pull pwm changes from Thierry Reding:
"All legacy PWM providers have now been moved to the PWM subsystem.
The plan for 3.8 is to adapt all board files to provide a lookup table
for PWM devices in order to get rid of the global namespace.
Subsequently, users of the legacy pwm_request() and pwm_free()
functions can be migrated to the new pwm_get() and pwm_put()
functions. Once this has been completed, the legacy API and the
compatibility code in the core can be removed.
In addition to the above, these changes also add support for
configuring the polarity of a PWM signal (currently only supported on
ECAP and EHRPWM) and include a much needed rework of the i.MX driver.
Managed functions to obtain and release a PWM device (devm_pwm_get()
and devm_pwm_put()) have been added and the pwm-backlight driver has
been updated to use them. If the PWM subsystem hasn't been enabled,
dummy functions are provided that allow the subsystem to safely
compile out.
Some common checks on input parameters have been moved to the core and
removed from the drivers. Finally, a small fix corrects the
description of the PWM specifier's second cell in the device tree
representation."
* tag 'for-3.7-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (23 commits)
pwm: dt: Fix description of second PWM cell
pwm: Check for negative duty-cycle and period
pwm: Add Ingenic JZ4740 support
MIPS: JZ4740: Export timer API
pwm: Move PUV3 PWM driver to PWM framework
unicore32: pwm: Use managed resource allocations
unicore32: pwm: Remove unnecessary indirection
unicore32: pwm: Use module_platform_driver()
unicore32: pwm: Properly remap memory-mapped registers
pwm-backlight: Use devm_pwm_get() instead of pwm_get()
pwm: Move AB8500 PWM driver to PWM framework
pwm: Fix compilation error when CONFIG_PWM is not defined
pwm: i.MX: fix clock lookup
pwm: i.MX: use per clock unconditionally
pwm: i.MX: add devicetree support
pwm: i.MX: Use module_platform_driver
pwm: i.MX: add functions to enable/disable pwm.
pwm: i.MX: remove unnecessary if in pwm_[en|dis]able
pwm: i.MX: factor out SoC specific functions
pwm: pwm-tiehrpwm: Add support for configuring polarity of PWM
...
Pull LED subsystem update from Bryan Wu.
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (24 commits)
leds: add output driver configuration for pca9633 led driver
leds: lm3642: Use regmap_update_bits() in lm3642_chip_init()
leds: Add new LED driver for lm3642 chips
leds-lp5523: Fix riskiness of the page fault
leds-lp5523: turn off the LED engines on unloading the driver
leds-lm3530: Fix smatch warnings
leds-lm3530: Use devm_regulator_get function
leds: leds-gpio: adopt pinctrl support
leds: Add new LED driver for lm355x chips
leds-lp5523: use the i2c device id rather than fixed name
leds-lp5523: add new device id for LP55231
leds-lp5523: support new LP55231 device
leds: triggers: send uevent when changing triggers
leds-lp5523: minor code style fixes
leds-lp5523: change the return type of lp5523_set_mode()
leds-lp5523: set the brightness to 0 forcely on removing the driver
leds-lp5523: add channel name in the platform data
leds: leds-gpio: Use of_get_child_count() helper
leds: leds-gpio: Use platform_{get,set}_drvdata
leds: leds-gpio: use of_match_ptr()
...
Pull scsi target updates from Nicholas Bellinger:
"Things have been calm for the most part with no new fabric drivers in
flight for v3.7 (we're up to eight now !), so this update is primarily
focused on addressing a few long-standing items within target-core and
iscsi-target fabric code.
The highlights include:
- target: Simplify fabric sense data length handling (roland)
- qla2xxx: Fix endianness of task management response code (roland)
- target: fix truncation of mode data, support zero allocation length
(paolo)
- target: Properly support zero-length commands in normal processing
path (paolo)
- iscsi-target: Correctly set 0xffffffff field within ISCSI_OP_REJECT
PDU (ronnie + nab)
- iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG
demo-mode (ronnie + nab)
- target/file: Re-enable optional fd_buffered_io=1 operation (nab +
hch)
- iscsi-target: Add MaxXmitDataSegmenthLength forr target ->
initiator MDRSL declaration (nab)
- target: Add target_submit_cmd_map_sgls for SGL fabric memory
passthrough (nab + hch)
- tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls (hch +
nab)
- tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls (nab
+ hch)
The last series for adding a new target_submit_cmd_map_sgls() fabric
caller (as requested by hch) that accepts pre-allocated SGL memory
(using existing logic), along with converting tcm_loop + tcm_vhost has
only been in -next for the last days, but has gotten enough review
+testing and is clear enough a mechanical change that I think it's
reasonable to merge for -rc1 code.
Thanks again to everyone who contributed this round! Extra special
thanks to Roland (PureStorage) for tracking down the qla2xxx target
TMR response code endian issue, and to Paolo (Redhat) for resolving
the long standing zero-length CDB issues within target-core between
virtual and pSCSI backends."
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (44 commits)
iscsi-target: Bump defaults for nopin_timeout + nopin_response_timeout values
iscsit: proper endianess conversions
iscsit: use the itt_t abstract type
iscsit: add missing endianess conversion in iscsit_check_inaddr_any
iscsit: remove incorrect unlock in iscsit_build_sendtargets_resp
iscsit: mark various functions static
target/iscsi: precedence bug in iscsit_set_dataout_sequence_values()
target/usb-gadget: strlen() doesn't count the terminator
target/usb-gadget: remove duplicate initialization
tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls
target: Add control CDB READ payload zero work-around
tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls
target: Add target_submit_cmd_map_sgls for SGL fabric memory passthrough
iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode
iscsi-target: Change iscsi_target_seq_pdu_list.c to honor MaxXmitDataSegmentLength
iscsi-target: Add MaxXmitDataSegmentLength connection recovery check
iscsi-target: Convert incoming PDU payload checks to MaxXmitDataSegmentLength
iscsi-target: Enable MaxXmitDataSegmentLength operation in login path
iscsi-target: Add base MaxXmitDataSegmentLength code
target/file: Re-enable optional fd_buffered_io=1 operation
...
When the lglock doesn't need to be exported we can use
DEFINE_STATIC_LGLOCK().
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The per_cpu locks are not used outside the file which contains the
DEFINE_LGLOCK(), so we can make these symbols static.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
struct lglocks use their own lock_key/lock_dep_map which are defined in
struct lglock. DEFINE_LGLOCK_LOCKDEP() is unused, so remove it and save a
small piece of memory.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Removed s_lock from super_block and removed lock/unlock super.
Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull generic execve() changes from Al Viro:
"This introduces the generic kernel_thread() and kernel_execve()
functions, and switches x86, arm, alpha, um and s390 over to them."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (26 commits)
s390: convert to generic kernel_execve()
s390: switch to generic kernel_thread()
s390: fold kernel_thread_helper() into ret_from_fork()
s390: fold execve_tail() into start_thread(), convert to generic sys_execve()
um: switch to generic kernel_thread()
x86, um/x86: switch to generic sys_execve and kernel_execve
x86: split ret_from_fork
alpha: introduce ret_from_kernel_execve(), switch to generic kernel_execve()
alpha: switch to generic kernel_thread()
alpha: switch to generic sys_execve()
arm: get rid of execve wrapper, switch to generic execve() implementation
arm: optimized current_pt_regs()
arm: introduce ret_from_kernel_execve(), switch to generic kernel_execve()
arm: split ret_from_fork, simplify kernel_thread() [based on patch by rmk]
generic sys_execve()
generic kernel_execve()
new helper: current_pt_regs()
preparation for generic kernel_thread()
um: kill thread->forking
um: let signal_delivered() do SIGTRAP on singlestepping into handler
...
Notable changes:
* Basic writeback support for DISPC level. Writeback is not yet usable, though,
as we need higher level code to actually expose the writeback feature to
userspace.
* Rewriting the omapdss output drivers. We're trying to remove the hard links
between the omapdss and the panels, and this rewrite work moves us closer to
that goal.
* Cleanup and restructuring patches that have been made while working on device
tree support for omapdss. Device tree support is still some way ahead, but
these patches are good cleanups in themselves.
* Basic OMAP5 DSS support for DPI and DSI outputs.
* Workaround for the problem that GFX overlay's fifo is too small for high
resolution scenarios, causing underflows.
* Cleanups that remove dependencies to omap platform code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJQae8PAAoJEPo9qoy8lh71l6EP/1ot2bJ1+8zkTO/N73SiMn/3
+6yGfX411Z9GNsEiDqgGKMboDpU7+Fqi0nO5mgPbbE936Lu92TA6DF/S6rr79iaQ
2faxqRiWYXkVfXo806fo0BMeprB6ieQNBaEXtRmMK+tlviZtgFfCy5+9oq4AxP64
zWuFl/lPuSkhzjU2hHygETHpccsxtNI7EiJf7UoBLBCKi/eU/E5XJKUJUBwhX68R
SA7SrpLfTNErAgdY4aMeLKprreN8VhJ7gp9+FCdnD7u4sawGpDIcF577EEc50Fjy
aZbDkQkL8p7zw8g/ejBsY9zlsZZk7LFOSkXhfZCstnhTvF9ugm9S6Ax2rqu3tVfd
M5B8n/I4njSFyQOxXyILfrGJdP/Fnpu6wlYKv+pNDQWspxo1saCu4Uju041A2lHy
HaanqxCvpiHAIjqzfOvtLDfGxqZs37QEER0mDlg7CR2iErw5aAyjfy/CHpjTJ6Ib
2X0ho0y5+ndxkuVhFp3+fZaDQ7Y2HVc0EduzaY6OvzqouTWq4pBgeLIoXXYdHtsp
wXfEPKghSZ6lA4wHYBRJppTLk3e56V6lVmC2/N+7PQkPm+Sfde1OAd8iqI0Ytm12
oL780L4XoWIbQml1ZZ6ZFwEO/2QnAqufzD7djMGkwm4BJb/04m4M2W2xWOEZ/R7T
0Xh/yWRDzQyrnzmyqg7K
=lcyJ
-----END PGP SIGNATURE-----
Merge tag 'omapdss-for-3.7' of git://gitorious.org/linux-omap-dss2/linux into fbdev-next
Omapdss driver changes for the 3.7 merge window.
Notable changes:
* Basic writeback support for DISPC level. Writeback is not yet usable, though,
as we need higher level code to actually expose the writeback feature to
userspace.
* Rewriting the omapdss output drivers. We're trying to remove the hard links
between the omapdss and the panels, and this rewrite work moves us closer to
that goal.
* Cleanup and restructuring patches that have been made while working on device
tree support for omapdss. Device tree support is still some way ahead, but
these patches are good cleanups in themselves.
* Basic OMAP5 DSS support for DPI and DSI outputs.
* Workaround for the problem that GFX overlay's fifo is too small for high
resolution scenarios, causing underflows.
* Cleanups that remove dependencies to omap platform code.
Pull networking updates from David Miller:
1) UAPI changes for networking from David Howells
2) A netlink dump is an operation we can sleep within, and therefore we
need to make sure the dump provider module doesn't disappear on us
meanwhile. Fix from Gao Feng.
3) Now that tunnels support GRO, we have to be more careful in
skb_gro_reset_offset() otherwise we OOPS, from Eric Dumazet.
4) We can end up processing packets for VLANs we aren't actually
configured to be on, fix from Florian Zumbiehl.
5) Fix routing cache removal regression in redirects and IPVS. The
core issue on the IPVS side is that it wants to rewrite who the
nexthop is and we have to explicitly accomodate that case. From
Julian Anastasov.
6) Error code return fixes all over the networking drivers from Peter
Senna Tschudin.
7) Fix routing cache removal regressions in IPSEC, from Steffen
Klassert.
8) Fix deadlock in RDS during pings, from Jeff Liu.
9) Neighbour packet queue can trigger skb_under_panic() because we do
not reset the network header of the SKB in the right spot. From
Ramesh Nagappa.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
RDS: fix rds-ping spinlock recursion
netdev/phy: Prototype of_mdio_find_bus()
farsync: fix support for over 30 cards
be2net: Remove code that stops further access to BE NIC based on UE bits
pch_gbe: Fix build error by selecting all the possible dependencies.
e1000e: add device IDs for i218
ixgbe/ixgbevf: Limit maximum jumbo frame size to 9.5K to avoid Tx hangs
ixgbevf: Set the netdev number of Tx queues
UAPI: (Scripted) Disintegrate include/linux/tc_ematch
UAPI: (Scripted) Disintegrate include/linux/tc_act
UAPI: (Scripted) Disintegrate include/linux/netfilter_ipv6
UAPI: (Scripted) Disintegrate include/linux/netfilter_ipv4
UAPI: (Scripted) Disintegrate include/linux/netfilter_bridge
UAPI: (Scripted) Disintegrate include/linux/netfilter_arp
UAPI: (Scripted) Disintegrate include/linux/netfilter/ipset
UAPI: (Scripted) Disintegrate include/linux/netfilter
UAPI: (Scripted) Disintegrate include/linux/isdn
UAPI: (Scripted) Disintegrate include/linux/caif
net: fix typo in freescale/ucc_geth.c
vxlan: fix more sparse warnings
...
Pull slave-dmaengine updates from Vinod Koul:
"This time we have Andy updates on dw_dmac which is attempting to make
this IP block available as PCI and platform device though not fully
complete this time.
We also have TI EDMA moving the dma driver to use dmaengine APIs, also
have a new driver for mmp-tdma, along with bunch of small updates.
Now for your excitement the merge is little unusual here, while
merging the auto merge on linux-next picks wrong choice for pl330
(drivers/dma/pl330.c) and this causes build failure. The correct
resolution is in linux-next. (DMA: PL330: Fix build error) I didn't
back merge your tree this time as you are better than me so no point
in doing that for me :)"
Fixed the pl330 conflict as in linux-next, along with trivial header
file conflicts due to changed includes.
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits)
dma: tegra: fix interrupt name issue with apb dma.
dw_dmac: fix a regression in dwc_prep_dma_memcpy
dw_dmac: introduce software emulation of LLP transfers
dw_dmac: autoconfigure data_width or get it via platform data
dw_dmac: autoconfigure block_size or use platform data
dw_dmac: get number of channels from hardware if possible
dw_dmac: fill optional encoded parameters in register structure
dw_dmac: mark dwc_dump_chan_regs as inline
DMA: PL330: return ENOMEM instead of 0 from pl330_alloc_chan_resources
DMA: PL330: Remove redundant runtime_suspend/resume functions
DMA: PL330: Remove controller clock enable/disable
dmaengine: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
DMA: PL330: Set the capability of pdm0 and pdm1 as DMA_PRIVATE
ARM: EXYNOS: Set the capability of pdm0 and pdm1 as DMA_PRIVATE
dma: tegra: use list_move_tail instead of list_del/list_add_tail
mxs/dma: Enlarge the CCW descriptor area to 4 pages
dw_dmac: utilize slave_id to pass request line
dmaengine: mmp_tdma: add dt support
dmaengine: mmp-pdma support
spi: davici - make davinci select edma
...
Core:
- Add DT properties for card detection (broken-cd, cd-gpios, non-removable)
- Don't poll non-removable devices
- Fixup/rework eMMC sleep mode/"power off notify" feature
- Support eMMC background operations (BKOPS). To set the one-time
programmable fuse that enables bkops on an eMMC that doesn't already
have it set, you can use the "mmc bkops enable" command in:
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git
Drivers:
- atmel-mci, dw_mmc, pxa-mci, dove, s3c, spear: Add device tree support
- bfin_sdh: Add support for the controller in bf60x
- dw_mmc: Support Samsung Exynos SoCs
- eSDHC: Add ADMA support
- sdhci: Support testing a cd-gpio (from slot-gpio) instead of presence bit
- sdhci-pltfm: Support broken-cd DT property
- tegra: Convert to only supporting DT (mach-tegra has gone DT-only)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=qyY5
-----END PGP SIGNATURE-----
Merge tag 'mmc-merge-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC updates from Chris Ball:
"Core:
- Add DT properties for card detection (broken-cd, cd-gpios,
non-removable)
- Don't poll non-removable devices
- Fixup/rework eMMC sleep mode/"power off notify" feature
- Support eMMC background operations (BKOPS). To set the one-time
programmable fuse that enables bkops on an eMMC that doesn't
already have it set, you can use the "mmc bkops enable" command in:
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git
Drivers:
- atmel-mci, dw_mmc, pxa-mci, dove, s3c, spear: Add device tree
support
- bfin_sdh: Add support for the controller in bf60x
- dw_mmc: Support Samsung Exynos SoCs
- eSDHC: Add ADMA support
- sdhci: Support testing a cd-gpio (from slot-gpio) instead of
presence bit
- sdhci-pltfm: Support broken-cd DT property
- tegra: Convert to only supporting DT (mach-tegra has gone DT-only)"
* tag 'mmc-merge-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (67 commits)
mmc: core: Fixup broken suspend and eMMC4.5 power off notify
mmc: sdhci-spear: Add clk_{un}prepare() support
mmc: sdhci-spear: add device tree bindings
mmc: sdhci-s3c: Add clk_(enable/disable) in runtime suspend/resume
mmc: core: Replace MMC_CAP2_BROKEN_VOLTAGE with test for fixed regulator
mmc: sdhci-pxav3: Use sdhci_get_of_property for parsing DT quirks
mmc: dt: Support "broken-cd" property in sdhci-pltfm
mmc: sdhci-s3c: fix the wrong number of max bus clocks
mmc: sh-mmcif: avoid oops on spurious interrupts
mmc: sh-mmcif: properly handle MMC_WRITE_MULTIPLE_BLOCK completion IRQ
mmc: sdhci-s3c: Fix crash on module insertion for second time
mmc: sdhci-s3c: Enable only required bus clock
mmc: Revert "mmc: dw_mmc: Add check for IDMAC configuration"
mmc: mxcmmc: fix bug that may block a data transfer forever
mmc: omap_hsmmc: Pass on the suspend failure to the PM core
mmc: atmel-mci: AP700x PDC is not connected to MCI
mmc: atmel-mci: DMA can be used with other controllers
mmc: mmci: use clk_prepare_enable and clk_disable_unprepare
mmc: sdhci-s3c: Add device tree support
mmc: dw_mmc: add support for exynos specific implementation of dw-mshc
...
- Disable broken mtdchar mmap() on MMU systems
- Additional ECC tests for NAND flash, and some test cleanups
- New NAND and SPI chip support
- Fixes/cleanup for SH FLCTL NAND controller driver
- Improved hardware support for GPMI NAND controller
- Conversions to device-tree support for various drivers
- Removal of obsolete drivers (sbc8xxx, bcmring, etc.)
- New LPC32xx drivers for MLC and SLC NAND
- Further cleanup of NAND OOB/ECC handling
- UAPI cleanup merge from David Howells (just moving files, since MTD
headers were sorted out long ago to separate user-visible from kernel
bits)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iEYEABECAAYFAlB0OosACgkQdwG7hYl686OSPACeKLrlHmyG8KXgAqcGZwAj1RM+
X9YAoI2Kd6Sz8v6sLbJidnxUBr/oJVa8
=/kFV
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20121009' of git://git.infradead.org/mtd-2.6
Pull MTD updates from David Woodhouse:
- Disable broken mtdchar mmap() on MMU systems
- Additional ECC tests for NAND flash, and some test cleanups
- New NAND and SPI chip support
- Fixes/cleanup for SH FLCTL NAND controller driver
- Improved hardware support for GPMI NAND controller
- Conversions to device-tree support for various drivers
- Removal of obsolete drivers (sbc8xxx, bcmring, etc.)
- New LPC32xx drivers for MLC and SLC NAND
- Further cleanup of NAND OOB/ECC handling
- UAPI cleanup merge from David Howells (just moving files, since MTD
headers were sorted out long ago to separate user-visible from kernel
bits)
* tag 'for-linus-20121009' of git://git.infradead.org/mtd-2.6: (168 commits)
mtd: Disable mtdchar mmap on MMU systems
UAPI: (Scripted) Disintegrate include/mtd
mtd: nand: detect Samsung K9GBG08U0A, K9GAG08U0F ID
mtd: nand: decode Hynix MLC, 6-byte ID length
mtd: nand: increase max OOB size to 640
mtd: nand: add generic READ ID length calculation functions
mtd: nand: split simple ID decode into its own function
mtd: nand: split extended ID decoding into its own function
mtd: nand: split BB marker options decoding into its own function
mtd: nand: remove redundant ID read
mtd: nand: remove unnecessary variable
mtd: docg4: add missing HAS_IOMEM dependency
mtd: gpmi: initialize the timing registers only one time
mtd: gpmi: add EDO feature for imx6q
mtd: gpmi: do not set the default values for the extra clocks
mtd: gpmi: simplify the DLL setting code
mtd: gpmi: add a new field for HW_GPMI_CTRL1
mtd: gpmi: do not get the clock frequency in gpmi_begin()
mtd: gpmi: add a new field for HW_GPMI_TIMING1
mtd: add helpers to get the supportted ONFI timing mode
...
Pull btrfs update from Chris Mason:
"This is a large pull, with the bulk of the updates coming from:
- Hole punching
- send/receive fixes
- fsync performance
- Disk format extension allowing more hardlinks inside a single
directory (btrfs-progs patch required to enable the compat bit for
this one)
I'm cooking more unrelated RAID code, but I wanted to make sure this
original batch makes it in. The largest updates here are relatively
old and have been in testing for some time."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (121 commits)
btrfs: init ref_index to zero in add_inode_ref
Btrfs: remove repeated eb->pages check in, disk-io.c/csum_dirty_buffer
Btrfs: fix page leakage
Btrfs: do not warn_on when we cannot alloc a page for an extent buffer
Btrfs: don't bug on enomem in readpage
Btrfs: cleanup pages properly when ENOMEM in compression
Btrfs: make filesystem read-only when submitting barrier fails
Btrfs: detect corrupted filesystem after write I/O errors
Btrfs: make compress and nodatacow mount options mutually exclusive
btrfs: fix message printing
Btrfs: don't bother committing delayed inode updates when fsyncing
btrfs: move inline function code to header file
Btrfs: remove unnecessary IS_ERR in bio_readpage_error()
btrfs: remove unused function btrfs_insert_some_items()
Btrfs: don't commit instead of overcommitting
Btrfs: confirmation of value is added before trace_btrfs_get_extent() is called
Btrfs: be smarter about dropping things from the tree log
Btrfs: don't lookup csums for prealloc extents
Btrfs: cache extent state when writing out dirty metadata pages
Btrfs: do not hold the file extent leaf locked when adding extent item
...
Pulled mainline in order to get the UAPI infrastructure already
merged before I pull in David Howells's UAPI trees for networking.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
