korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-13 05:54:23 +08:00
Code Issues Packages Projects Releases Wiki Activity
1,013,455 Commits 113 Branches 5,294 Tags 3.6 GiB
78f6f40602
Commit Graph

7513 Commits

Author SHA1 Message Date
Robert Hancock
78f6f40602 clk: si5341: Avoid divide errors due to bogus register contents 
If the Si5341 is being initially programmed and has no stored NVM
configuration, some of the register contents may contain unexpected
values, such as zeros, which could cause divide by zero errors during
driver initialization. Trap errors caused by zero registers or zero clock
rates which could result in divide errors later in the code.

Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-4-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-06-27 19:58:14 -07:00
Robert Hancock
6e7d2de1e0 clk: si5341: Wait for DEVICE_READY on startup 
The Si5341 datasheet warns that before accessing any other registers,
including the PAGE register, we need to wait for the DEVICE_READY register
to indicate the device is ready, or the process of the device loading its
state from NVM can be corrupted. Wait for DEVICE_READY on startup before
continuing initialization. This is done using a raw I2C register read
prior to setting up regmap to avoid any potential unwanted automatic PAGE
register accesses from regmap at this stage.

Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-3-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-06-27 19:58:14 -07:00
Linus Torvalds
57151b502c pci-v5.13-changes 
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmCRp48UHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vwsVRAAsIYueNKzZczpkeQwHigYzf4HLdKm
 yyT2c/Zlj9REAUOe7ApkowVAJWiMGDJP0J361KIluAGvAxnkMP1V6WlVdByorYd0
 CrXc/UhD//cs+3QDo4SmJRHyL8q5QQTDa8Z/8seVJUYTR/t5OhSpMOuEJPhpeQ1s
 nqUk0yWNJRoN6wn6T/7KqgYEvPhARXo9epuWy5MNPZ5f8E7SRi/QG/6hP8/YOLpK
 A+8beIOX5LAvUJaXxEovwv5UQnSUkeZTGDyRietQYE6xXNeHPKCvZ7vDjjSE7NOW
 mIodD6JcG3n/riYV3sMA5PKDZgsPI3P/qJU6Y6vWBBYOaO/kQX/c7CZ+M2bcZay4
 mh1dW0vOqoTy/pAVwQB2aq08Rrg2SAskpNdeyzduXllmuTyuwCMPXzG4RKmbQ8I1
 qMFb8qOyNulRAWcTKgSMKByEQYASQsFA5yShtaba6h0+vqrseuP6hchBKKOEan8F
 9THTI3ZflKwRvGjkI0MDbp0z0+wPYmNhrcZDpAJ3bEltw58E8TL/9aBtuhajmo8+
 wJ64mZclFuMmSyhsfkAXOvjeKXMlEBaw7vinZGbcACmv4ZGI0MV7r4vVYQbQltcy
 myzB6xJxcWB8N07UpKpUbsGMb9JjTUPlaT36eZNvUZQDntrE1ljt8RSq3nphDrcD
 KmBRU8ru74I2RE0=
 =WvTD
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:
   - Release OF node when pci_scan_device() fails (Dmitry Baryshkov)
   - Add pci_disable_parity() (Bjorn Helgaas)
   - Disable Mellanox Tavor parity reporting (Heiner Kallweit)
   - Disable N2100 r8169 parity reporting (Heiner Kallweit)
   - Fix RCiEP device to RCEC association (Qiuxu Zhuo)
   - Convert sysfs "config", "rom", "reset", "label", "index",
     "acpi_index" to static attributes to help fix races in device
     enumeration (Krzysztof Wilczyński)
   - Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof
     Wilczyński)
   - Use sysfs_emit() in "show" functions (Krzysztof Wilczyński)
   - Remove unused alloc_pci_root_info() return value (Krzysztof
     Wilczyński)

  PCI device hotplug:
   - Fix acpiphp reference count leak (Feilong Lin)

  Power management:
   - Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki)
   - Fix runtime PM imbalance (Dinghao Liu)

  Virtualization:
   - Increase delay after FLR to work around Intel DC P4510 NVMe erratum
     (Raphael Norwitz)

  MSI:
   - Convert rcar, tegra, xilinx to MSI domains (Marc Zyngier)
   - For rcar, xilinx, use controller address as MSI doorbell (Marc
     Zyngier)
   - Remove unused hv msi_controller struct (Marc Zyngier)
   - Remove unused PCI core msi_controller support (Marc Zyngier)
   - Remove struct msi_controller altogether (Marc Zyngier)
   - Remove unused default_teardown_msi_irqs() (Marc Zyngier)
   - Let host bridges declare their reliance on MSI domains (Marc
     Zyngier)
   - Make pci_host_common_probe() declare its reliance on MSI domains
     (Marc Zyngier)
   - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner)
   - Document ways of ending up with NO_MSI (Marc Zyngier)
   - Refactor HT advertising of NO_MSI flag (Marc Zyngier)

  VPD:
   - Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner
     Kallweit)
   - Remove sysfs VPD size checking dead code (Heiner Kallweit)
   - Convert VPF sysfs file to static attribute (Heiner Kallweit)
   - Remove unnecessary pci_set_vpd_size() (Heiner Kallweit)
   - Tone down "missing VPD" message (Heiner Kallweit)

  Endpoint framework:
   - Fix NULL pointer dereference when epc_features not implemented
     (Shradha Todi)
   - Add missing destroy_workqueue() in endpoint test (Yang Yingliang)

  Amazon Annapurna Labs PCIe controller driver:
   - Fix compile testing without CONFIG_PCI_ECAM (Arnd Bergmann)
   - Fix "no symbols" warnings when compile testing with
     CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann)

  APM X-Gene PCIe controller driver:
   - Fix cfg resource mapping regression (Dejin Zheng)

  Broadcom iProc PCIe controller driver:
   - Return zero for success of iproc_msi_irq_domain_alloc() (Pali
     Rohár)

  Broadcom STB PCIe controller driver:
   - Add reset_control_rearm() stub for !CONFIG_RESET_CONTROLLER (Jim
     Quinlan)
   - Fix use of BCM7216 reset controller (Jim Quinlan)
   - Use reset/rearm for Broadcom STB pulse reset instead of
     deassert/assert (Jim Quinlan)
   - Fix brcm_pcie_probe() error return for unsupported revision (Wei
     Yongjun)

  Cavium ThunderX PCIe controller driver:
   - Fix compile testing (Arnd Bergmann)
   - Fix "no symbols" warnings when compile testing with
     CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann)

  Freescale Layerscape PCIe controller driver:
   - Fix ls_pcie_ep_probe() syntax error (comma for semicolon)
     (Krzysztof Wilczyński)
   - Remove layerscape-gen4 dependencies on OF and ARM64, add dependency
     on ARCH_LAYERSCAPE (Geert Uytterhoeven)

  HiSilicon HIP PCIe controller driver:
   - Remove obsolete HiSilicon PCIe DT description (Dongdong Liu)

  Intel Gateway PCIe controller driver:
   - Remove unused pcie_app_rd() (Jiapeng Chong)

  Intel VMD host bridge driver:
   - Program IRTE with Requester ID of VMD endpoint, not child device
     (Jon Derrick)
   - Disable VMD MSI-X remapping when possible so children can use more
     MSI-X vectors (Jon Derrick)

  MediaTek PCIe controller driver:
   - Configure FC and FTS for functions other than 0 (Ryder Lee)
   - Add YAML schema for MediaTek (Jianjun Wang)
   - Export pci_pio_to_address() for module use (Jianjun Wang)
   - Add MediaTek MT8192 PCIe controller driver (Jianjun Wang)
   - Add MediaTek MT8192 INTx support (Jianjun Wang)
   - Add MediaTek MT8192 MSI support (Jianjun Wang)
   - Add MediaTek MT8192 system power management support (Jianjun Wang)
   - Add missing MODULE_DEVICE_TABLE (Qiheng Lin)

  Microchip PolarFlare PCIe controller driver:
   - Make several symbols static (Wei Yongjun)

  NVIDIA Tegra PCIe controller driver:
   - Add MCFG quirks for Tegra194 ECAM errata (Vidya Sagar)
   - Make several symbols const (Rikard Falkeborn)
   - Fix Kconfig host/endpoint typo (Wesley Sheng)

  SiFive FU740 PCIe controller driver:
   - Add pcie_aux clock to prci driver (Greentime Hu)
   - Use reset-simple in prci driver for PCIe (Greentime Hu)
   - Add SiFive FU740 PCIe host controller driver and DT binding (Paul
     Walmsley, Greentime Hu)

  Synopsys DesignWare PCIe controller driver:
   - Move MSI Receiver init to dw_pcie_host_init() so it is
     re-initialized along with the RC in resume (Jisheng Zhang)
   - Move iATU detection earlier to fix regression (Hou Zhiqiang)

  TI J721E PCIe driver:
   - Add DT binding and TI j721e support for refclk to PCIe connector
     (Kishon Vijay Abraham I)
   - Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon
     Vijay Abraham I)

  TI Keystone PCIe controller driver:
   - Use generic config accessors for TI AM65x (K3) to fix regression
     (Kishon Vijay Abraham I)

  Xilinx NWL PCIe controller driver:
   - Add support for coherent PCIe DMA traffic using CCI (Bharat Kumar
     Gogada)
   - Add optional "dma-coherent" DT property (Bharat Kumar Gogada)

  Miscellaneous:
   - Fix kernel-doc warnings (Krzysztof Wilczyński)
   - Remove unused MicroGate SyncLink device IDs (Jiri Slaby)
   - Remove redundant dev_err() for devm_ioremap_resource() failure
     (Chen Hui)
   - Remove redundant initialization (Colin Ian King)
   - Drop redundant dev_err() for platform_get_irq() errors (Krzysztof
     Wilczyński)"

* tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (98 commits)
  riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC
  PCI: fu740: Add SiFive FU740 PCIe host controller driver
  dt-bindings: PCI: Add SiFive FU740 PCIe host controller
  MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver
  clk: sifive: Use reset-simple in prci driver for PCIe driver
  clk: sifive: Add pcie_aux clock in prci driver for PCIe driver
  PCI: brcmstb: Use reset/rearm instead of deassert/assert
  ata: ahci_brcm: Fix use of BCM7216 reset controller
  reset: add missing empty function reset_control_rearm()
  PCI: Allow VPD access for QLogic ISP2722
  PCI/VPD: Add helper pci_get_func0_dev()
  PCI/VPD: Remove pci_vpd_find_tag() SRDT handling
  PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument
  PCI/VPD: Change pci_vpd_init() return type to void
  PCI/VPD: Make missing VPD message less alarming
  PCI/VPD: Remove pci_set_vpd_size()
  x86/PCI: Remove unused alloc_pci_root_info() return value
  MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer
  PCI: mediatek-gen3: Add system PM support
  PCI: mediatek-gen3: Add MSI support
  ...
 2021-05-05 13:24:11 -07:00
Greentime Hu
e4d368e0b6 clk: sifive: Use reset-simple in prci driver for PCIe driver 
We use reset-simple in this patch so that pcie driver can use
devm_reset_control_get() to get this reset data structure and use
reset_control_deassert() to deassert pcie_power_up_rst_n.

Link: https://lore.kernel.org/r/20210504105940.100004-3-greentime.hu@sifive.com
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Stephen Boyd <sboyd@kernel.org>
 2021-05-04 12:26:09 +01:00
Greentime Hu
c61287bf17 clk: sifive: Add pcie_aux clock in prci driver for PCIe driver 
We add pcie_aux clock in this patch so that pcie driver can use
clk_prepare_enable() and clk_disable_unprepare() to enable and disable
pcie_aux clock.

Link: https://lore.kernel.org/r/20210504105940.100004-2-greentime.hu@sifive.com
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
 2021-05-04 12:26:09 +01:00
Linus Torvalds
35655ceb31 Here's a collection of largely clk driver updates for the merge window. The 
usual suspects are here: i.MX, Qualcomm, Renesas, Allwinner, Samsung, and
 Rockchip, but it feels pretty light on commits. There's only one real commit to
 the framework core and that's to consolidate code. Otherwise the diffstat is
 dominated by many Qualcomm clk driver patches that modernize the driver for the
 proper way of speciying clk parents. That's shifting data around, which could
 subtly break things so I'll be on the lookout for fixes.
 
 New Drivers:
  - Proper clk driver for Mediatek MT7621 SoCs
  - Support for the clock controller on the new Rockchip rk3568
 
 Updates:
  - Simplify Zynq Kconfig dependencies
  - Use clk_hw pointers in socfpga driver
  - Cleanup parent data in qcom clk drivers
  - Some cleanups for rk3399 modularization
  - Fix reparenting of i.MX UART clocks by initializing only the ones
    associated to stdout
  - Correct the PCIE clocks for i.MX8MP and i.MX8MQ
  - Make i.MX LPCG and SCU clocks return on registering failure
  - Kernel doc fixes
  - Add DAB hardware accelerator clocks on Renesas R-Car E3 and M3-N
  - Add timer (TMU) clocks on Renesas R-Car H3 ES1.0
  - Add Timer (TMU & CMT) and thermal sensor (TSC) clocks on Renesas R-Car V3U
  - Sigma-delta modulation on Allwinner V3s audio PLL
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmCJ9PcRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSXEFhAAuWMm47mZjE4TG+6qizcGC7kEDwS9Rs+j
 0oYzdWBmSn7vGBZCCdr/IgvjK3CviNDXE076w5ntZm5kajD3yUOBNkFpHxOa9la7
 NuH+OJiJQfzfzwFPwQmMZ0TjeaPDLqXcneKC80nYnauo7HScnySdiLdAmEnzJn7v
 3a6Jf0Wzv1QIMZxdX3HgHts/VcWwonNJ1IGPUl5Ac7tJgUKLi+l1R27dow9eCH83
 7KPFXjCsiE9jwIBvEUEvxguz5SPQujSHc81cLp8FnIsY7YsTx48NaHQrpcqQM8f8
 zliC29QIjvWr8BGMKcHmuDwEG68gDdjHzmaKJSbcVTZ/jikQu+lOMNX96HRSdNe1
 48UTk8Gqwyj9xI4OGC8A2ssLCGvDivSpdEfYoH7hE3K/+dxjwita9ZGIiD7Zp7C+
 omjVGIUeSqoyQBXINC3sVwR+8nqCyR6ceRTxeELa8XwjPLwVg2JGPvJCKLHr5RED
 TXtt3SYCcoKbdxqrBwOsMx1dhWvkx2f0iAKyUKt8jbAIE+bNwbqGOnWMaqiM+j8r
 ixG8WL59087XYBjeO7kwn16Gszf5EkZWRTsA27tHni4hDUFp1ZpPRUJwvHgT1S5v
 o1Tvo5AmtvT9HMasPa5cqlQh7FOrRb2FPXxaQRFR8VX6GQanWf9N+MP3THwRSNVn
 2oadQvAJm/w=
 =z+1G
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "Here's a collection of largely clk driver updates. The usual suspects
  are here: i.MX, Qualcomm, Renesas, Allwinner, Samsung, and Rockchip,
  but it feels pretty light on commits.

  There's only one real commit to the framework core and that's to
  consolidate code. Otherwise the diffstat is dominated by many Qualcomm
  clk driver patches that modernize the driver for the proper way of
  speciying clk parents. That's shifting data around, which could subtly
  break things so I'll be on the lookout for fixes.

  New Drivers:
   - Proper clk driver for Mediatek MT7621 SoCs
   - Support for the clock controller on the new Rockchip rk3568

  Updates:
   - Simplify Zynq Kconfig dependencies
   - Use clk_hw pointers in socfpga driver
   - Cleanup parent data in qcom clk drivers
   - Some cleanups for rk3399 modularization
   - Fix reparenting of i.MX UART clocks by initializing only the ones
     associated to stdout
   - Correct the PCIE clocks for i.MX8MP and i.MX8MQ
   - Make i.MX LPCG and SCU clocks return on registering failure
   - Kernel doc fixes
   - Add DAB hardware accelerator clocks on Renesas R-Car E3 and M3-N
   - Add timer (TMU) clocks on Renesas R-Car H3 ES1.0
   - Add Timer (TMU & CMT) and thermal sensor (TSC) clocks on
     Renesas R-Car V3U
   - Sigma-delta modulation on Allwinner V3s audio PLL"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (82 commits)
  MAINTAINERS: add MT7621 CLOCK maintainer
  staging: mt7621-dts: use valid vendor 'mediatek' instead of invalid 'mtk'
  staging: mt7621-dts: make use of new 'mt7621-clk'
  clk: ralink: add clock driver for mt7621 SoC
  clk: uniphier: Fix potential infinite loop
  clk: qcom: rpmh: add support for SDX55 rpmh IPA clock
  clk: qcom: gcc-sdm845: get rid of the test clock
  clk: qcom: convert SDM845 Global Clock Controller to parent_data
  dt-bindings: clock: separate SDM845 GCC clock bindings
  clk: qcom: apss-ipq-pll: Add missing MODULE_DEVICE_TABLE
  clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE
  clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE
  dt: bindings: add mt7621-sysc device tree binding documentation
  dt-bindings: clock: add dt binding header for mt7621 clocks
  clk: samsung: Remove redundant dev_err calls
  clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable
  clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback
  clk: zynqmp: Drop dependency on ARCH_ZYNQMP
  clk: zynqmp: Enable the driver if ZYNQMP_FIRMWARE is selected
  clk: qcom: gcc-sm8350: use ARRAY_SIZE instead of specifying num_parents
  ...
 2021-04-28 17:13:56 -07:00
Linus Torvalds
71a5cc28e8 - Core Frameworks 
- Add support for Software Nodes to MFD Core
    - Remove support for Device Properties from MFD Core
    - Use standard APIs in MFD Core
 
  - New Drivers
    - Add support for ROHM BD9576MUF and BD9573MUF PMICs
    - Add support for Netronix Embedded Controller, PWM and RTC
    - Add support for Actions Semi ATC260x PMICs and OnKey
 
  - New Device Support
    - Add support for DG1 PCIe Graphics Card to Intel PMT
    - Add support for ROHM BD71815 PMIC to ROHM BD71828
    - Add support for Tolino Shine 2 HD to Netronix Embedded Controller
    - Add support for AX10 BMC Secure Updates to Intel M10 BMC
 
  - Removed Device Support
    - Remove Arizona Extcon support from MFD
    - Remove ST-E AB8500 Power Supply code from MFD
    - Remove AB3100 altogether
 
  - New Functionality
    - Add support for SMBus and I2C modes to Dialog DA9063
    - Switch to using Software Nodes in Intel (various)
 
  - New/converted Device Tree bindings; rohm,bd71815-pmic, rohm,bd9576-pmic,
                                        netronix,ntxec, actions,atc260x,
 				       ricoh,rn5t618, qcom-pm8xxx
 
 - Fix-ups
    - Fix error handling/path; intel_pmt
    - Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
    - Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618, max8997
    - Use correct data-type; db8500-prcmu
    - Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
    - Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
    - Regmap related fix-ups; intel-m10-bmc, sec-core
    - Reorder resource freeing during remove; intel_quark_i2c_gpio
    - Make table indexing more robust; intel_quark_i2c_gpio
    - Fix reference imbalances; arizona-irq
    - Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
                                         intel-lpss-acpi, intel-lpss-pci,
                                         atc260x-i2c, intel_quark_i2c_gpio
 
  - Bug Fixes
    - Fix incorrect (register) values; intel-m10-bmc
    - Kconfig related fixes; ABX500_CORE
    - Do not clear the Auto Reload Register; stm32-timers
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmCJIPEACgkQUa+KL4f8
 d2FRZA//Xu9f8u2uLuIfuhxIjUUXOqIjRAFnkhKlgGZhKsY8BohjQ80Tj9yp6UKy
 St6ABwACO0hJap4zL4FxPW9+HXTmqZvAibnvHnvZdYSQ3ai6x9h6kTNvhSNLeRQU
 fuY7eN8kpAHHiHNKNJCsQLQMvcIyP7+0KAP6qir5GYsMjiXspWq7THUnfBi2JXC6
 y60guDo9XrgmQTO+pB870UJrKLM/h+iiohNRGxLFlShKhFCgbTB/wyw6bFeKy1SB
 0/6XuY6fOt1IQyBDuzw383Q2faMWO9U+es29bwvFxdqJDK0MHQXC47zBba2q94wL
 /9i/HSoz9dRHnTJNYUKWsVcPv4T84w/Iq7scyDvE00ubehJ+oo/M7Au3M6Tt3M1/
 6lBAwFYXiwhQnp9EP3nwPwgJF6JzX1IGuMOsUAqrVFOEMuIkZKbRdUlatUhqepJT
 spV4/TOfztAhY/7BzEOZLnF8cFNjmL5sn42/UzSRW708V5SxuTNsS48KJ4l0c7Er
 CZSTlR/T1rKkWqf7ejaS2TNqMCdYyB3vZW0quDxZTHTZHv9huNUvtbKPR7jmd+4p
 mrMIik7EE4BzC5m8tBPnXXZl+Og0keeYv4LUDBuLDX1agrxYIErl4ITvQTqqMfX1
 Jt14SIjSO56iu2ngQuvGWwegVK4/urO2kBJKUAH1QN1OocNaajQ=
 =IJSL
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Framework:
   - Add support for Software Nodes to MFD Core
   - Remove support for Device Properties from MFD Core
   - Use standard APIs in MFD Core

  New Drivers:
   - Add support for ROHM BD9576MUF and BD9573MUF PMICs
   - Add support for Netronix Embedded Controller, PWM and RTC
   - Add support for Actions Semi ATC260x PMICs and OnKey

  New Device Support:
   - Add support for DG1 PCIe Graphics Card to Intel PMT
   - Add support for ROHM BD71815 PMIC to ROHM BD71828
   - Add support for Tolino Shine 2 HD to Netronix Embedded Controller
   - Add support for AX10 BMC Secure Updates to Intel M10 BMC

  Removed Device Support:
   - Remove Arizona Extcon support from MFD
   - Remove ST-E AB8500 Power Supply code from MFD
   - Remove AB3100 altogether

  New Functionality:
   - Add support for SMBus and I2C modes to Dialog DA9063
   - Switch to using Software Nodes in Intel (various)

  New/converted Device Tree bindings:
   - rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions
     atc260x, ricoh rn5t618, qcom pm8xxx

- Fix-ups:
   - Fix error handling/path; intel_pmt
   - Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
   - Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618,
     max8997
   - Use correct data-type; db8500-prcmu
   - Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
   - Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
   - Regmap related fix-ups; intel-m10-bmc, sec-core
   - Reorder resource freeing during remove; intel_quark_i2c_gpio
   - Make table indexing more robust; intel_quark_i2c_gpio
   - Fix reference imbalances; arizona-irq
   - Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
     intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio

  Bug Fixes:
   - Fix incorrect (register) values; intel-m10-bmc
   - Kconfig related fixes; ABX500_CORE
   - Do not clear the Auto Reload Register; stm32-timers"

* tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits)
  mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates
  Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell"
  mfd: twl: Remove unused inline function twl4030charger_usb_en()
  dt-bindings: mfd: Convert pm8xxx bindings to yaml
  dt-bindings: mfd: Add compatible for pmk8350 rtc
  i2c: designware: Get rid of legacy platform data
  mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes
  mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"
  mfd: arizona: Fix rumtime PM imbalance on error
  mfd: max8997: Replace 8998 with 8997
  mfd: core: Use acpi_find_child_device() for child devices lookup
  mfd: intel_quark_i2c_gpio: Don't play dirty trick with const
  mfd: intel_quark_i2c_gpio: Enable MSI interrupt
  mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing
  mfd: ntxec: Support for EC in Tolino Shine 2 HD
  mfd: stm32-timers: Avoid clearing auto reload register
  mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions
  mfd: intel_quark_i2c_gpio: Remove unused struct device member
  mfd: intel_quark_i2c_gpio: Unregister resources in reversed order
  mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500
  ...
 2021-04-28 15:59:13 -07:00
Linus Torvalds
68a32ba141 drm for 5.13-rc1 
- printk fourcc modifier support added %p4cc
 
 core:
 - drm_crtc_commit_wait
 - atomic plane state helpers reworked for full state
 - dma-buf heaps API rework
 - edid: rework and improvements for displayid
 
 dp-mst:
  - better topology logging
 
 bridge:
 - Chipone ICN6211
 - Lontium LT8912B
 - anx7625 regulator support
 
 panel:
 - fix lt9611 4k panels handling
 
 simple-kms:
 - add plane state helpers
 
 ttm:
 - debugfs support
 - removal of unused sysfs
 - ignore signaled moved fences
 - ioremap buffer according to mem caching
 
 i915:
 - Alderlake S enablement
 - Conversion to dma_resv_locking
 - Bring back watchdog timeout support
 - legacy ioctl cleanups
 - add GEM TDDO and RFC process
 - DG1 LMEM preparation work
 - intel_display.c refactoring
 - Gen9/TGL PCH combination support
 - eDP MSO Support
 - multiple PSR instance support
 - Link training debug updates
 - Disable PSR2 support on JSL/EHL
 - DDR5/LPDDR5 support for bw calcs
 - LSPCON limited to gen9/10 platforms
 - HSW/BDW async flip/VTd corruption workaround
 = SAGV watermakr fixes
 - SNB hard hang on ring resume fix
 - Limit imported dma-buf size
 - move to use new tasklet API
 - refactor KBL/TGL/ADL-S display/gt steppings
 - refactoring legacy DP/HDMI, FB plane code out
 
 amdgpu:
 - uapi: add ioctl to query video capabilities
 - Iniital AMD Freesync HDMI support
 - Initial Adebaran support
 - 10bpc dithering improvements
 - DCN secure display support
 - Drop legacy IO BAR requirements
 - PCIE/S0ix/RAS/Prime/Reset fixes
 - Display ASSR support
 - SMU gfx busy queues for RV/PCO
 - Initial LTTPR display work
 
 amdkfd:
 - MMU notifier fixes
 - APU fixes
 
 radeon:
 - debugfs cleanps
 - fw error handling ifix
 - Flexible array cleanups
 
 msm:
 - big DSI phy/pll cleanup
 - sc7280 initial support
 - commong bandwidth scaling path
 - shrinker locking contention fixes
 - unpin/swap support for GEM objcets
 
 ast:
 - cursor plane handling reworked
 
 tegra:
 - don't register DP AUX channels before connectors
 
 zynqmp:
 - fix OOB struct padding memset
 
 gma500:
 - drop ttm and medfield support
 
 exynos:
 - request_irq cleanup function
 
 mediatek:
 - fine tune line time for EOTp
 - MT8192 dpi support
 - atomic crtc config updates
 - don't support HDMI connector creation
 
 mxsdb:
 - imx8mm support
 
 panfrost:
 -= MMU IRQ handling rework
 
 qxl:
 - locking fixes
 - resource deallocation changes
 
 sun4i:
 - add alpha properties to UI/VI layers
 
 vc4:
 - RPi4 CEC support
 
 vmwgfx:
 - doc cleanups
 
 arc:
 - moved to drm/tiny
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJgiNSVAAoJEAx081l5xIa+fvYP/1206BfOYOx5opt5K3By06ZY
 zrOsbeaqFdHzfUR7xVwO4vqQNhkX4Pt8H/U7uYZx8PRdrXzGENwWLIaIskyUrKOd
 BtwNqUr0ZXJGDlGg26StnUHKeAXuYXlpBKLta5y4LUTkI+bm6V/oVaDMq4dnah70
 2CXS4C2mnaFRLBzuRlraxoGFN4eZkz6Waeyo6PJxn/l2GE2gw+jho0Yrh8e8F2w5
 EjQeNF22/uHwznov03XFJlyugecuBDbE8A6Ma/znnkVdBXcT94eUMugbKOKi4Nn6
 PuJOEdJxmj/9s3oi6kBERc8dvpOj0O+8Vp+xOzn2U3BVXebvu7VoJsq6FcAvL5lN
 ltj4iErxUlEud2GRIVUMx8OTFiKj4ThRFJ2/8Uf22r3P7RHO5E9BLnZBzqIAhDVr
 s2cDBMItcxcVHRCmE04h12XAO4libZBb2TVjbqG94Acq7beR76pMszFrmxPmHBEm
 NGe1s7+ajxMzsq/NIsk4XAhqSmJo6+ujKyyVnrgvKUVeEaWW1U4YvjhJaetnP4fB
 47gF24wOSNFwiCUZlqaIpp/MR4Z8YmaJ7tayWQq4Oj/neWe/yc8xQgQIuE8GL20j
 P9eNQNvlBnoxkz275M9x4kVhJ5FRjr7OYnd3sFVnALuj6fnL3Z1RXLqI1lNtIz1d
 YM89veZuNxMaiDz8roPH
 =bLWZ
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "The usual lots of work all over the place.

  i915 has gotten some Alderlake work and prelim DG1 code, along with a
  major locking rework over the GEM code, and brings back the property
  of timing out long running jobs using a watchdog. amdgpu has some
  Alderbran support (new GPU), freesync HDMI support along with a lot
  other fixes.

  Outside of the drm, there is a new printf specifier added which should
  have all the correct acks/sobs:

   - printk fourcc modifier support added %p4cc

  Summary:

  core:
   - drm_crtc_commit_wait
   - atomic plane state helpers reworked for full state
   - dma-buf heaps API rework
   - edid: rework and improvements for displayid

  dp-mst:
   - better topology logging

  bridge:
   - Chipone ICN6211
   - Lontium LT8912B
   - anx7625 regulator support

  panel:
   - fix lt9611 4k panels handling

  simple-kms:
   - add plane state helpers

  ttm:
   - debugfs support
   - removal of unused sysfs
   - ignore signaled moved fences
   - ioremap buffer according to mem caching

  i915:
   - Alderlake S enablement
   - Conversion to dma_resv_locking
   - Bring back watchdog timeout support
   - legacy ioctl cleanups
   - add GEM TDDO and RFC process
   - DG1 LMEM preparation work
   - intel_display.c refactoring
   - Gen9/TGL PCH combination support
   - eDP MSO Support
   - multiple PSR instance support
   - Link training debug updates
   - Disable PSR2 support on JSL/EHL
   - DDR5/LPDDR5 support for bw calcs
   - LSPCON limited to gen9/10 platforms
   - HSW/BDW async flip/VTd corruption workaround
   - SAGV watermark fixes
   - SNB hard hang on ring resume fix
   - Limit imported dma-buf size
   - move to use new tasklet API
   - refactor KBL/TGL/ADL-S display/gt steppings
   - refactoring legacy DP/HDMI, FB plane code out

  amdgpu:
   - uapi: add ioctl to query video capabilities
   - Iniital AMD Freesync HDMI support
   - Initial Adebaran support
   - 10bpc dithering improvements
   - DCN secure display support
   - Drop legacy IO BAR requirements
   - PCIE/S0ix/RAS/Prime/Reset fixes
   - Display ASSR support
   - SMU gfx busy queues for RV/PCO
   - Initial LTTPR display work

  amdkfd:
   - MMU notifier fixes
   - APU fixes

  radeon:
   - debugfs cleanps
   - fw error handling ifix
   - Flexible array cleanups

  msm:
   - big DSI phy/pll cleanup
   - sc7280 initial support
   - commong bandwidth scaling path
   - shrinker locking contention fixes
   - unpin/swap support for GEM objcets

  ast:
   - cursor plane handling reworked

  tegra:
   - don't register DP AUX channels before connectors

  zynqmp:
   - fix OOB struct padding memset

  gma500:
   - drop ttm and medfield support

  exynos:
   - request_irq cleanup function

  mediatek:
   - fine tune line time for EOTp
   - MT8192 dpi support
   - atomic crtc config updates
   - don't support HDMI connector creation

  mxsdb:
   - imx8mm support

  panfrost:
   - MMU IRQ handling rework

  qxl:
   - locking fixes
   - resource deallocation changes

  sun4i:
   - add alpha properties to UI/VI layers

  vc4:
   - RPi4 CEC support

  vmwgfx:
   - doc cleanups

  arc:
   - moved to drm/tiny"

* tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm: (1390 commits)
  drm/ttm: Don't count pages in SG BOs against pages_limit
  drm/ttm: fix return value check
  drm/bridge: lt8912b: fix incorrect handling of of_* return values
  drm: bridge: fix LONTIUM use of mipi_dsi_() functions
  drm: bridge: fix ANX7625 use of mipi_dsi_() functions
  drm/amdgpu: page retire over debugfs mechanism
  drm/radeon: Fix a missing check bug in radeon_dp_mst_detect()
  drm/amd/display: Fix the Wunused-function warning
  drm/radeon/r600: Fix variables that are not used after assignment
  drm/amdgpu/smu7: fix CAC setting on TOPAZ
  drm/amd/display: Update DCN302 SR Exit Latency
  drm/amdgpu: enable ras eeprom on aldebaran
  drm/amdgpu: RAS harvest on driver load
  drm/amdgpu: add ras aldebaran ras eeprom driver
  drm/amd/pm: increase time out value when sending msg to SMU
  drm/amdgpu: add DMUB outbox event IRQ source define/complete/debug flag
  drm/amd/pm: add the callback to get vbios bootup values for vangogh
  drm/radeon: Fix size overflow
  drm/amdgpu: Fix size overflow
  drm/amdgpu: move mmhub ras_func init to ip specific file
  ...
 2021-04-28 10:01:40 -07:00
Linus Torvalds
3aa139aa9f media updates for v5.13-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmCH7/AACgkQCF8+vY7k
 4RVWVg//bcGubc1Sq68r0C+RMI1ETWMthtlkz9DTigDnht8uTmO+DohsE9R1mq4I
 szwwcwfMnMdbLB+zP7v1JNicT8GNMeFu7STurwj1w6YeQ5/IHcQc4P39+/8EAwqB
 hrUSIsY+RuYuv7dROwi45Yn8/mmWH4vdP3zrm3/k/EdlEBrf6C0e0KbGLqCr9Zrx
 pWVMB22RGfzh+1qQJhA43rDYceXs5/b5/Y1Dc/W97lJXyv87Hy0g333R+G1KzKLf
 3fhluSaLHC1j6Mm7Vneowy3mDjeyPZBiRajvNbbApQMzKIa78rJGOjMEBynHW1Rl
 Np7N0cGIq2a/yai7fCQk1SO9MdsLzE8rG+X/KxS3LSgb8c1RT31VaZhRfD9Pn4Gr
 asJ/JO7SX3YHXDO8F9WtsD/Fi9AREPz2o3I1760zk5KNQf9uvxeWkQPHQkKLlO/7
 6JWtmu5KbzUMqXZyekhcTDfqJE3xgUg36xLa7wDy8FlgDfE9MZUBaRwktHyfNgi0
 6tDdv1/w0iEvglUGVLMlQRh2ysx3lgBuAmI8Jg1vSt9DhZLsj8DY89/JE3B+CCBX
 uT9Zwc/Ug/HEpYMEhptP26z/TgVIkxs5iCvKripJ5GKl/tEIqsHSjqW5lzgI/6O+
 hKjxgZdeQ8+F9TJ5AMIBDU82trwDj77lIcHsRFRI6JLs/9L2PRo=
 =fvc5
 -----END PGP SIGNATURE-----

Merge tag 'media/v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - addition of a maintainer's profile for the media subsystem

 - addition of i.MX8 IP support

 - qcom/camss gained support for hardware version Titan 170

 - new RC keymaps

 - Lots of other improvements, cleanups and bug fixes

* tag 'media/v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (488 commits)
  media: coda: fix macroblocks count control usage
  media: rkisp1: params: fix wrong bits settings
  media: cedrus: Fix H265 status definitions
  media: meson-ge2d: fix rotation parameters
  media: v4l2-ctrls: fix reference to freed memory
  media: venus : hfi: add venus image info into smem
  media: venus: Fix internal buffer size calculations for v6.
  media: venus: helpers: keep max bandwidth when mbps exceeds the supported range
  media: venus: fix hw overload error log condition
  media: venus: core: correct firmware name for sm8250
  media: venus: core,pm: fix potential infinite loop
  media: venus: core: Fix kerneldoc warnings
  media: gscpa/stv06xx: fix memory leak
  media: cx25821: remove unused including <linux/version.h>
  media: staging: media/meson: remove redundant dev_err call
  media: adv7842: support 1 block EDIDs, fix clearing EDID
  media: adv7842: configure all pads
  media: allegro: change kernel-doc comment blocks to normal comments
  media: camss: ispif: Remove redundant dev_err call in msm_ispif_subdev_init()
  media: i2c: rdamc21: Fix warning on u8 cast
  ...
 2021-04-28 09:24:36 -07:00
Stephen Boyd
3ba2d41dca Merge branch 'clk-ralink' into clk-next 
- Proper clk driver for Mediatek MT7621 SoCs

* clk-ralink:
  MAINTAINERS: add MT7621 CLOCK maintainer
  staging: mt7621-dts: use valid vendor 'mediatek' instead of invalid 'mtk'
  staging: mt7621-dts: make use of new 'mt7621-clk'
  clk: ralink: add clock driver for mt7621 SoC
  dt: bindings: add mt7621-sysc device tree binding documentation
  dt-bindings: clock: add dt binding header for mt7621 clocks
 2021-04-27 16:34:56 -07:00
Stephen Boyd
bbc3b403b0 Merge branches 'clk-imx', 'clk-samsung', 'clk-zynq', 'clk-rockchip' and 'clk-uniphier' into clk-next 
- Simplify Zynq Kconfig dependencies

* clk-imx:
  clk: imx: Reference preceded by free
  clk: imx8mq: Correct the pcie1 sels
  clk: imx8mp: Remove the none exist pcie clocks
  clk: imx: Fix reparenting of UARTs not associated with stdout

* clk-samsung:
  clk: samsung: Remove redundant dev_err calls
  clk: exynos7: Mark aclk_fsys1_200 as critical

* clk-zynq:
  clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable
  clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback
  clk: zynqmp: Drop dependency on ARCH_ZYNQMP
  clk: zynqmp: Enable the driver if ZYNQMP_FIRMWARE is selected

* clk-rockchip:
  clk: rockchip: drop MODULE_ALIAS from rk3399 clock controller
  clk: rockchip: drop parenthesis from ARM || COMPILE_TEST depends
  clk: rockchip: add clock controller for rk3568
  clk: rockchip: support more core div setting
  dt-binding: clock: Document rockchip, rk3568-cru bindings
  clk: rockchip: add dt-binding header for rk3568

* clk-uniphier:
  clk: uniphier: Fix potential infinite loop
 2021-04-27 16:34:44 -07:00
Stephen Boyd
c3ad321932 Merge branches 'clk-cleanup', 'clk-renesas', 'clk-socfpga', 'clk-allwinner' and 'clk-qcom' into clk-next 
- Use clk_hw pointers in socfpga driver
 - Cleanup parent data in qcom clk drivers

* clk-cleanup:
  clk: Drop double "if" in clk_core_determine_round_nolock() comment
  clk: at91: Trivial typo fixes in the file sama7g5.c
  clk: use clk_core_enable_lock() a bit more

* clk-renesas:
  clk: renesas: Zero init clk_init_data
  clk: renesas: Couple of spelling fixes
  clk: renesas: r8a779a0: Add CMT clocks
  clk: renesas: r8a7795: Add TMU clocks
  clk: renesas: r8a779a0: Add TSC clock
  clk: renesas: r8a779a0: Add TMU clocks
  clk: renesas: r8a77965: Add DAB clock
  clk: renesas: r8a77990: Add DAB clock

* clk-socfpga:
  clk: socfpga: remove redundant initialization of variable div
  clk: socfpga: arria10: Fix memory leak of socfpga_clk on error return
  clk: socfpga: Fix code formatting
  clk: socfpga: Convert to s10/agilex/n5x to use clk_hw
  clk: socfpga: arria10: convert to use clk_hw
  clk: socfpga: use clk_hw_register for a5/c5

* clk-allwinner:
  clk: sunxi: Demote non-conformant kernel-doc headers
  clk: sunxi-ng: v3s: use sigma-delta modulation for audio-pll

* clk-qcom: (45 commits)
  clk: qcom: rpmh: add support for SDX55 rpmh IPA clock
  clk: qcom: gcc-sdm845: get rid of the test clock
  clk: qcom: convert SDM845 Global Clock Controller to parent_data
  dt-bindings: clock: separate SDM845 GCC clock bindings
  clk: qcom: apss-ipq-pll: Add missing MODULE_DEVICE_TABLE
  clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE
  clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE
  clk: qcom: gcc-sm8350: use ARRAY_SIZE instead of specifying num_parents
  clk: qcom: gcc-sm8250: use ARRAY_SIZE instead of specifying num_parents
  clk: qcom: gcc-sm8150: use ARRAY_SIZE instead of specifying num_parents
  clk: qcom: gcc-sc8180x: use ARRAY_SIZE instead of specifying num_parents
  clk: qcom: gcc-sc7180: use ARRAY_SIZE instead of specifying num_parents
  clk: qcom: videocc-sm8250: use parent_hws where possible
  clk: qcom: videocc-sm8150: use parent_hws where possible
  clk: qcom: gpucc-sm8250: use parent_hws where possible
  clk: qcom: gpucc-sm8150: use parent_hws where possible
  clk: qcom: gcc-sm8350: use parent_hws where possible
  clk: qcom: gcc-sm8250: use parent_hws where possible
  clk: qcom: gcc-sm8150: use parent_hws where possible
  clk: qcom: gcc-sdx55: use parent_hws where possible
  ...
 2021-04-27 16:34:28 -07:00
Linus Torvalds
57fa2369ab CFI on arm64 series for v5.13-rc1 
- Clean up list_sort prototypes (Sami Tolvanen)
 
 - Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmCHCR8ACgkQiXL039xt
 wCZyFQ//fnUZaXR2K354zDyW6CJljMf+d94RF6rH+J6eMTH2/HXa5v0iJokwABLf
 ussP6qF4k5wtmI22Gm9A5Zc3e4iiry5pC0jOdk0mk4gzWwFN9MdgNxJZIGA3xqhS
 bsBK4AGrVKjtZl48G1/ZxJuNDeJhVp6GNK2n6/Gl4rZF6R7D/Upz0XelyJRdDpcM
 HIGma7jZl6xfGU0mdWCzpOGK1zdMca1WVs7A4YuurSbLn5PZJrcNVWLouDqt/Si2
 AduSri1gyPClicgvqWjMOzhUpuw/nJtBLRl1x1EsWk/KSZ1/uNVjlewfzdN4fZrr
 zbtFr2gLubYLK6JOX7/LqoHlOTgE3tYLL+WIVN75DsOGZBKgHhmebTmWLyqzV0SL
 oqcyM5d3ucC6msdtAK5Fv4MSp8rpjqlK1Ha4SGRT6kC2wut7AhZ3KD7eyRIz8mV9
 Sa9mhignGFJnTEUp+LSbYdrAudgSKxB40WyXPmswAXX4VJFRD4ONrrcAON/SzkUT
 Hw/JdFRCKkJjgwNQjIQoZcUNMTbFz2PlNIEnjJWm38YImQKQlCb2mXaZKCwBkf45
 aheCZk17eKoxTCXFMd+KxlyNEtS2yBfq/PpZgvw7GW/pfFbWUg1+2O41LnihIe5v
 zu0hN1wNCQqgfxiMZqX1OTb9C/2vybzGsXILt+9nppjZ8EBU7iU=
 =wU6U
 -----END PGP SIGNATURE-----

Merge tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull CFI on arm64 support from Kees Cook:
 "This builds on last cycle's LTO work, and allows the arm64 kernels to
  be built with Clang's Control Flow Integrity feature. This feature has
  happily lived in Android kernels for almost 3 years[1], so I'm excited
  to have it ready for upstream.

  The wide diffstat is mainly due to the treewide fixing of mismatched
  list_sort prototypes. Other things in core kernel are to address
  various CFI corner cases. The largest code portion is the CFI runtime
  implementation itself (which will be shared by all architectures
  implementing support for CFI). The arm64 pieces are Acked by arm64
  maintainers rather than coming through the arm64 tree since carrying
  this tree over there was going to be awkward.

  CFI support for x86 is still under development, but is pretty close.
  There are a handful of corner cases on x86 that need some improvements
  to Clang and objtool, but otherwise works well.

  Summary:

   - Clean up list_sort prototypes (Sami Tolvanen)

   - Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"

* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  arm64: allow CONFIG_CFI_CLANG to be selected
  KVM: arm64: Disable CFI for nVHE
  arm64: ftrace: use function_nocfi for ftrace_call
  arm64: add __nocfi to __apply_alternatives
  arm64: add __nocfi to functions that jump to a physical address
  arm64: use function_nocfi with __pa_symbol
  arm64: implement function_nocfi
  psci: use function_nocfi for cpu_resume
  lkdtm: use function_nocfi
  treewide: Change list_sort to use const pointers
  bpf: disable CFI in dispatcher functions
  kallsyms: strip ThinLTO hashes from static functions
  kthread: use WARN_ON_FUNCTION_MISMATCH
  workqueue: use WARN_ON_FUNCTION_MISMATCH
  module: ensure __cfi_check alignment
  mm: add generic function_nocfi macro
  cfi: add __cficanonical
  add support for Clang CFI
 2021-04-27 10:16:46 -07:00
Linus Torvalds
5469f160e6 Power management updates for 5.13-rc1 
- Add idle states table for IceLake-D to the intel_idle driver and
    update IceLake-X C6 data in it (Artem Bityutskiy).
 
  - Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
    drop the unused do_idle() firmware call from it (Dmitry Osipenko).
 
  - Fix cpuidle-qcom-spm Kconfig entry (He Ying).
 
  - Fix handling of possible negative tick_nohz_get_next_hrtimer()
    return values of in cpuidle governors (Rafael Wysocki).
 
  - Add support for frequency-invariance to the ACPI CPPC cpufreq
    driver and update the frequency-invariance engine (FIE) to use it
    as needed (Viresh Kumar).
 
  - Simplify the default delay_us setting in the ACPI CPPC cpufreq
    driver (Tom Saeger).
 
  - Clean up frequency-related computations in the intel_pstate
    cpufreq driver (Rafael Wysocki).
 
  - Fix TBG parent setting for load levels in the armada-37xx
    cpufreq driver and drop the CPU PM clock .set_parent method for
    armada-37xx (Marek Behún).
 
  - Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).
 
  - Fix handling of dev_pm_opp_of_cpumask_add_table() return values
    in cpufreq-dt to take the -EPROBE_DEFER one into acconut as
    appropriate (Quanyang Wang).
 
  - Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).
 
  - Drop the unused for_each_policy() macro from cpufreq (Shaokun
    Zhang).
 
  - Simplify computations in the schedutil cpufreq governor to avoid
    unnecessary overhead (Yue Hu).
 
  - Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).
 
  - Fix cpufreq documentation links in Kconfig (Alexander Monakov).
 
  - Fix PCI device power state handling in pci_enable_device_flags()
    to avoid issuse in some cases when the device depends on an ACPI
    power resource (Rafael Wysocki).
 
  - Add missing documentation of pm_runtime_resume_and_get() (Alan
    Stern).
 
  - Add missing static inline stub for pm_runtime_has_no_callbacks()
    to pm_runtime.h and drop the unused try_to_freeze_nowarn()
    definition (YueHaibing).
 
  - Drop duplicate struct device declaration from pm.h and fix a
    structure type declaration in intel_rapl.h (Wan Jiabing).
 
  - Use dev_set_name() instead of an open-coded equivalent of it in
    the wakeup sources code and drop a redundant local variable
    initialization from it (Andy Shevchenko, Colin Ian King).
 
  - Use crc32 instead of md5 for e820 memory map integrity check
    during resume from hibernation on x86 (Chris von Recklinghausen).
 
  - Fix typos in comments in the system-wide and hibernation support
    code (Lu Jialin).
 
  - Modify the generic power domains (genpd) code to avoid resuming
    devices in the "prepare" phase of system-wide suspend and
    hibernation (Ulf Hansson).
 
  - Add Hygon Fam18h RAPL support to the intel_rapl power capping
    driver (Pu Wen).
 
  - Add MAINTAINERS entry for the dynamic thermal power management
    (DTPM) code (Daniel Lezcano).
 
  - Add devm variants of operating performance points (OPP) API
    functions and switch over some users of the OPP framework to
    the new resource-managed API (Yangtao Li and Dmitry Osipenko).
 
  - Update devfreq core:
 
    * Register devfreq devices as cooling devices on demand (Daniel
      Lezcano).
 
    * Add missing unlock opeation in devfreq_add_device() (Lukasz
      Luba).
 
    * Use the next frequency as resume_freq instead of the previous
      frequency when using the opp-suspend property (Dong Aisheng).
 
    * Check get_dev_status in devfreq_update_stats() (Dong Aisheng).
 
    * Fix set_freq path for the userspace governor in Kconfig (Dong
      Aisheng).
 
    * Remove invalid description of get_target_freq() (Dong Aisheng).
 
  - Update devfreq drivers:
 
    * imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
      of_match_ptr() (Dong Aisheng, Fabio Estevam).
 
    * rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
      references to undefined symbols (Enric Balletbo i Serra, Gaël
      PORTAY).
 
    * rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
      Kozlowski).
 
    * imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).
 
  - Fix kernel-doc warnings in three places (Pierre-Louis Bossart).
 
  - Fix typo in the pm-graph utility code (Ricardo Ribalda).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmCHAUISHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxAxMP/0tFjgxeaJ3chYaiqoPlk2QX/XdwqJvm
 8OOu2qBMWbt2bubcIlAPpdlCNaERI4itF7E8za7t9alswdq7YPWGmNR9snCXUKhD
 BzERuicZTeOcCk2P3DTgzLVc4EzF6wutA3lTdYYZIpf+LuuB+guG8zgMzScRHIsM
 N3I83O+iLTA9ifIqN0/wH//a0ISvo6rSWtcbx+48d5bYvYixW7CsBmoxWHhGiYsw
 4PJ4AzbdNJEhQp91SBYPIAmqwV88FZUPoYnRazXMxOSevMewhP9JuCHXAujC3gLV
 l5d2TBaBV4EBYLD5tfCpJvHMXhv/yBpg6KRivjri+zEnY1TAqIlfR4vYiL7puVvQ
 PdwjyvNFDNGyUSX/AAwYF6F4WCtIhw8hCahw6Dw2zcDz0plFdRZmWAiTdmIjECJK
 8EvwJNlmdl27G1y+EBc6NnwzEFZQwiu9F5bUHUkmc3fF1M1aFTza8WDNDo30TC94
 94c+uVBRL2fBePl4FfGZATfJbOMb8+vDIkroQxrIjQDT/7Ha3Mz75JZDRHItZo92
 +4fES2eFdfZISCLIQMBY5TeXox3O8qsirC1k4qELwy71gPUE9CpP3FkxKIvyZLlv
 +6fS9ttpUfyFBF7gqrEy+ziVk1Rm4oorLmWCtthz4xyerzj5+vtZQqKzcySk0GA5
 hYkseZkedR6y
 =t+SG
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add some new hardware support (for example, IceLake-D idle
  states in intel_idle), fix some issues (for example, the handling of
  negative "sleep length" values in cpuidle governors), add new
  functionality to the existing drivers (for example, scale-invariance
  support in the ACPI CPPC cpufreq driver) and clean up code all over.

  Specifics:

   - Add idle states table for IceLake-D to the intel_idle driver and
     update IceLake-X C6 data in it (Artem Bityutskiy).

   - Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
     drop the unused do_idle() firmware call from it (Dmitry Osipenko).

   - Fix cpuidle-qcom-spm Kconfig entry (He Ying).

   - Fix handling of possible negative tick_nohz_get_next_hrtimer()
     return values of in cpuidle governors (Rafael Wysocki).

   - Add support for frequency-invariance to the ACPI CPPC cpufreq
     driver and update the frequency-invariance engine (FIE) to use it
     as needed (Viresh Kumar).

   - Simplify the default delay_us setting in the ACPI CPPC cpufreq
     driver (Tom Saeger).

   - Clean up frequency-related computations in the intel_pstate cpufreq
     driver (Rafael Wysocki).

   - Fix TBG parent setting for load levels in the armada-37xx cpufreq
     driver and drop the CPU PM clock .set_parent method for armada-37xx
     (Marek Behún).

   - Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).

   - Fix handling of dev_pm_opp_of_cpumask_add_table() return values in
     cpufreq-dt to take the -EPROBE_DEFER one into acconut as
     appropriate (Quanyang Wang).

   - Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).

   - Drop the unused for_each_policy() macro from cpufreq (Shaokun
     Zhang).

   - Simplify computations in the schedutil cpufreq governor to avoid
     unnecessary overhead (Yue Hu).

   - Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).

   - Fix cpufreq documentation links in Kconfig (Alexander Monakov).

   - Fix PCI device power state handling in pci_enable_device_flags() to
     avoid issuse in some cases when the device depends on an ACPI power
     resource (Rafael Wysocki).

   - Add missing documentation of pm_runtime_resume_and_get() (Alan
     Stern).

   - Add missing static inline stub for pm_runtime_has_no_callbacks() to
     pm_runtime.h and drop the unused try_to_freeze_nowarn() definition
     (YueHaibing).

   - Drop duplicate struct device declaration from pm.h and fix a
     structure type declaration in intel_rapl.h (Wan Jiabing).

   - Use dev_set_name() instead of an open-coded equivalent of it in the
     wakeup sources code and drop a redundant local variable
     initialization from it (Andy Shevchenko, Colin Ian King).

   - Use crc32 instead of md5 for e820 memory map integrity check during
     resume from hibernation on x86 (Chris von Recklinghausen).

   - Fix typos in comments in the system-wide and hibernation support
     code (Lu Jialin).

   - Modify the generic power domains (genpd) code to avoid resuming
     devices in the "prepare" phase of system-wide suspend and
     hibernation (Ulf Hansson).

   - Add Hygon Fam18h RAPL support to the intel_rapl power capping
     driver (Pu Wen).

   - Add MAINTAINERS entry for the dynamic thermal power management
     (DTPM) code (Daniel Lezcano).

   - Add devm variants of operating performance points (OPP) API
     functions and switch over some users of the OPP framework to the
     new resource-managed API (Yangtao Li and Dmitry Osipenko).

   - Update devfreq core:

      * Register devfreq devices as cooling devices on demand (Daniel
        Lezcano).

      * Add missing unlock opeation in devfreq_add_device() (Lukasz
        Luba).

      * Use the next frequency as resume_freq instead of the previous
        frequency when using the opp-suspend property (Dong Aisheng).

      * Check get_dev_status in devfreq_update_stats() (Dong Aisheng).

      * Fix set_freq path for the userspace governor in Kconfig (Dong
        Aisheng).

      * Remove invalid description of get_target_freq() (Dong Aisheng).

   - Update devfreq drivers:

      * imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
        of_match_ptr() (Dong Aisheng, Fabio Estevam).

      * rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
        references to undefined symbols (Enric Balletbo i Serra, Gaël
        PORTAY).

      * rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
        Kozlowski).

      * imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).

   - Fix kernel-doc warnings in three places (Pierre-Louis Bossart).

   - Fix typo in the pm-graph utility code (Ricardo Ribalda)"

* tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
  PM: wakeup: remove redundant assignment to variable retval
  PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check
  cpufreq: Kconfig: fix documentation links
  PM: wakeup: use dev_set_name() directly
  PM: runtime: Add documentation for pm_runtime_resume_and_get()
  cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits()
  cpufreq: armada-37xx: Fix module unloading
  cpufreq: armada-37xx: Remove cur_frequency variable
  cpufreq: armada-37xx: Fix determining base CPU frequency
  cpufreq: armada-37xx: Fix driver cleanup when registration failed
  clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
  clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
  cpufreq: armada-37xx: Fix the AVS value for load L1
  clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
  cpufreq: armada-37xx: Fix setting TBG parent for load levels
  cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
  cpuidle: tegra: Remove do_idle firmware call
  cpuidle: tegra: Fix C7 idling state on Tegra114
  PM: sleep: fix typos in comments
  cpufreq: Remove unused for_each_policy macro
  ...
 2021-04-26 15:10:25 -07:00
Linus Torvalds
37f00ab4a0 ARM: SoC drivers for v5.13 
Updates for SoC specific drivers include a few subsystems that
 have their own maintainers but send them through the soc tree:
 
 TEE/OP-TEE:
  -  Add tracepoints around calls to secure world
 
 Memory controller drivers:
  - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
  - Add debug statistics to Tegra20 memory controller
  - Update Tegra bindings and convert to dtschema
 
 ARM SCMI Firmware:
  - Support for modular SCMI protocols and vendor specific extensions
  - New SCMI IIO driver
  - Per-cpu DVFS
 
 The other driver changes are all from the platform maintainers
 directly and reflect the drivers that don't fit into any other
 subsystem as well as treewide changes for a particular platform.
 
 SoCFPGA:
  - Various cleanups contributed by Krzysztof Kozlowski
 
 Mediatek:
  - add MT8183 support to mutex driver
  - MMSYS: use per SoC array to describe the possible routing
  - add MMSYS support for MT8183 and MT8167
  - add support for PMIC wrapper with integrated arbiter
  - add support for MT8192/MT6873
 
 Tegra:
  - Bug fixes to PMC and clock drivers
 
 NXP/i.MX:
  - Update SCU power domain driver to keep console domain power on.
  - Add missing ADC1 power domain to SCU power domain driver.
  - Update comments for single global power domain in SCU power domain
    driver.
  - Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
 
 NXP/FSL SoC driver updates for v5.13
  - Add ACPI support for RCPM driver
  - Use generic io{read,write} for QE drivers after performance optimized
    for PowerPC
  - Fix QBMAN probe to cleanup HW states correctly for kexec
  - Various cleanup and style fix for QBMAN/QE/GUTS drivers
 
 OMAP:
  - Preparation to use devicetree for genpd
  - ti-sysc needs iorange check improved when the interconnect target module
    has no control registers listed
  - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
    issues with missing resources and unnecessary deferred probe
  - ti-sysc debug option can now detect more devices
  - ti-sysc now warns if an old incomplete devicetree data is found as we
    now rely on it being complete for am3 and 4
  - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7
  - omap-prm driver needs to enable autoidle retention support for omap4
  - omap5 clocks are missing gpmc and ocmc clock registers
  - pci-dra7xx now needs to use builtin_platform_driver instead of using
    builtin_platform_driver_probe for deferred probe to work
 
 Raspberry Pi:
  - Fix-up all RPi firmware drivers so as for unbind to happen in an
    orderly fashion
  - Support for RPi's PoE hat PWM bus
 
 Qualcomm
  - Improved detection for SCM calling conventions
  - Support for OEM specific wifi firmware path
  - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmCC2JwACgkQmmx57+YA
 GNkgRg//cBtq2NyDbjiNABxFSkmGCfcc0w0C2wjVzr4cfg6BLTbuvvlpZxI912pu
 P1G2sbsdfQJ8sSeIyZos+PilWK0zHrqlaGZfKI19US45dMjpteDBgsPd7wNZwBjQ
 jbops3YLjztZK1HpY4dIdvMnfxt7yRqhBWaTbPuCwQ35c5KsOM8NHB3cP3BUINWK
 x1uuBCv9svppzwdDiPxneV93WKEzabOUo+WBMPyh5vnyvmW17Iif4BA/VKQxzymm
 mWUi8HHpKBpvntJOKwAD2hnLAdpR3SwX20SLOpyLhnJMotbzNUEqq3LdRxDNPdHk
 ry+rarJ78JGlYfpcfegf2bLf5ITNMfOyRGkjtzeYpcZIXPjufOg9DA9YtAy37k0u
 L0T/9gQ+tQ01WGMca77OyUtIqJKdblZrQMfuH/yGlR99bqFQMV7rNc7GNlX1MXp/
 zw4aOYrRWGtGEeAjx5JJWcYydvMSJpCrqxTz3YhgeJECHB2iA6YkV3NROR4TLW//
 tfxaKqxR/KmSqE6hoVOAuuQ0BLXNlql/+4EE6MKsAOBiKPJclvmJg4CyuY8G21ev
 9Su0zJnXMzai7gNu32v1pizGj26+AOhxCEgAG0mGgk2jlQSn24CKgm5e7kCUewcF
 j/1XksNPT95v/K8MsLpXe5xGvF3jhA1BlFfvjJNZOrcZywBXRxg=
 =iidq
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Updates for SoC specific drivers include a few subsystems that have
  their own maintainers but send them through the soc tree:

  TEE/OP-TEE:
   - Add tracepoints around calls to secure world

  Memory controller drivers:
   - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
   - Add debug statistics to Tegra20 memory controller
   - Update Tegra bindings and convert to dtschema

  ARM SCMI Firmware:
   - Support for modular SCMI protocols and vendor specific extensions
   - New SCMI IIO driver
   - Per-cpu DVFS

  The other driver changes are all from the platform maintainers
  directly and reflect the drivers that don't fit into any other
  subsystem as well as treewide changes for a particular platform.

  SoCFPGA:
   - Various cleanups contributed by Krzysztof Kozlowski

  Mediatek:
   - add MT8183 support to mutex driver
   - MMSYS: use per SoC array to describe the possible routing
   - add MMSYS support for MT8183 and MT8167
   - add support for PMIC wrapper with integrated arbiter
   - add support for MT8192/MT6873

  Tegra:
   - Bug fixes to PMC and clock drivers

  NXP/i.MX:
   - Update SCU power domain driver to keep console domain power on.
   - Add missing ADC1 power domain to SCU power domain driver.
   - Update comments for single global power domain in SCU power domain
     driver.
   - Add i.MX51/i.MX53 unique id support to i.MX SoC driver.

  NXP/FSL SoC driver updates for v5.13
   - Add ACPI support for RCPM driver
   - Use generic io{read,write} for QE drivers after performance
     optimized for PowerPC
   - Fix QBMAN probe to cleanup HW states correctly for kexec
   - Various cleanup and style fix for QBMAN/QE/GUTS drivers

  OMAP:
   - Preparation to use devicetree for genpd
   - ti-sysc needs iorange check improved when the interconnect target
     module has no control registers listed
   - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
     avoid issues with missing resources and unnecessary deferred probe
   - ti-sysc debug option can now detect more devices
   - ti-sysc now warns if an old incomplete devicetree data is found as
     we now rely on it being complete for am3 and 4
   - soc init code needs to check for prcm and prm nodes for omap4/5 and
     dra7
   - omap-prm driver needs to enable autoidle retention support for
     omap4
   - omap5 clocks are missing gpmc and ocmc clock registers
   - pci-dra7xx now needs to use builtin_platform_driver instead of
     using builtin_platform_driver_probe for deferred probe to work

  Raspberry Pi:
   - Fix-up all RPi firmware drivers so as for unbind to happen in an
     orderly fashion
   - Support for RPi's PoE hat PWM bus

  Qualcomm
   - Improved detection for SCM calling conventions
   - Support for OEM specific wifi firmware path
   - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"

* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
  soc: aspeed: fix a ternary sign expansion bug
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
  memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
  clk: socfpga: fix iomem pointer cast on 64-bit
  soc: aspeed: Adapt to new LPC device tree layout
  pinctrl: aspeed-g5: Adapt to new LPC device tree layout
  ipmi: kcs: aspeed: Adapt to new LPC DTS layout
  ARM: dts: Remove LPC BMC and Host partitions
  dt-bindings: aspeed-lpc: Remove LPC partitioning
  soc: fsl: enable acpi support in RCPM driver
  soc: qcom: mdt_loader: Detect truncated read of segments
  soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
  soc: qcom: pdr: Fix error return code in pdr_register_listener
  firmware: qcom_scm: Fix kernel-doc function names to match
  firmware: qcom_scm: Suppress sysfs bind attributes
  firmware: qcom_scm: Workaround lack of "is available" call on SC7180
  firmware: qcom_scm: Reduce locking section for __get_convention()
  firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
  Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
  ...
 2021-04-26 12:11:52 -07:00
Linus Torvalds
01d7136894 ARM: SoC changes for v5.13 
Almost all SoC code changes this time are for the TI OMAP
 platform, which continues its decade-long quest to move from
 describing a complex SoC in code to device tree.
 
 Aside from this, the Uniphier platform has a new maintainer
 and some platforms have minor bugfixes and cleanups that were
 not urgent enough for v5.12.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmCC2JoACgkQmmx57+YA
 GNk2jg/9HPrMBjoxNMEynsN066Dnc3AVBG8veYAigS0mJuMX3HzUqp+RNn5YxEak
 0SKWgocjawi5MjtuCRmM/BO0SY4wPUMOxnqx/AE4q3u6VVpfx+XJu+1bywAx7UFC
 FnqstmqFAfJDLJUe4Pfv4SuXRJYyGKBoEdRK9Xr13qSstQ1gm4ccWbtRStWCcVvv
 f4J0gPK0dw99lgbCOLbrBMfz1zuxCwhILg+qZ0+WPl9NNfxurQ2+/Cj/8P/L0IH+
 BoiZ5NaISWnvlBWaSTh6P7d3omhbA149CPjybUy2b/s84oNHdm7XLpwymVp941zt
 sM3gBIi7UDKMfXUrjWDZAXY06MZa/62BLCHQ2Fx+A1ve9TC0AqmSmUxhB4Z8xXs2
 3U97kZnTAPX9Scno9k7eDXbVXKVzlDL8zdZtGvY56x/EiAiPSJaTcaU6puNgdF9z
 7IPFKdpMbePcxHN03dC17B4HYVoSTp2gCadOSRSrBmVjAoswzYKoAOHrzibCwUzI
 knbsShhJe/BtxvLJ7e/hq0YZBTTZXUcX/3Iuw6C+j+9l9Cod/JhYOoHQM7gvqHv6
 JRz0Wt9IrMhYBMYlf0g8zHZa7IUDAq7k6x8XwLjK/M/WdeS2tI3+Cmt5ePhlgZVb
 eBPzikxcvglDojE7zTkBeC/+jlpolWQ6UfRnptSvkof1DWVPkiE=
 =YFEX
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "Almost all SoC code changes this time are for the TI OMAP platform,
  which continues its decade-long quest to move from describing a
  complex SoC in code to device tree.

  Aside from this, the Uniphier platform has a new maintainer and some
  platforms have minor bugfixes and cleanups that were not urgent enough
  for v5.12"

* tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
  MAINTAINERS: Update ARM/UniPhier SoCs maintainers and status
  mailmap: Update email address for Nicolas Saenz
  MAINTAINERS: Update BCM2711/BCM2335 maintainer's mail
  ARM: exynos: correct kernel doc in platsmp
  ARM: hisi: use the correct HiSilicon copyright
  ARM: ux500: make ux500_cpu_die static
  ARM: s3c: Use pwm_get() in favour of pwm_request() in RX1950
  ARM: OMAP1: fix incorrect kernel-doc comment syntax in file
  ARM: OMAP2+: fix incorrect kernel-doc comment syntax in file
  ARM: OMAP2+: Use DEFINE_SPINLOCK() for spinlock
  ARM: at91: pm: Move prototypes to mutually included header
  ARM: OMAP2+: use true and false for bool variable
  ARM: OMAP2+: add missing call to of_node_put()
  ARM: OMAP2+: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  ARM: imx: Kconfig: Fix typo in help
  ARM: mach-imx: Fix a spelling in the file pm-imx5.c
  bus: ti-sysc: Warn about old dtb for dra7 and omap4/5
  ARM: OMAP2+: Stop building legacy code for dra7 and omap4/5
  ARM: OMAP2+: Drop legacy platform data for omap5 hwmod
  ARM: OMAP2+: Drop legacy platform data for omap5 l3
  ...
 2021-04-26 11:48:26 -07:00
Rafael J. Wysocki
dd9f2ae924 Merge branch 'pm-cpufreq' 
* pm-cpufreq: (22 commits)
  cpufreq: Kconfig: fix documentation links
  cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits()
  cpufreq: armada-37xx: Fix module unloading
  cpufreq: armada-37xx: Remove cur_frequency variable
  cpufreq: armada-37xx: Fix determining base CPU frequency
  cpufreq: armada-37xx: Fix driver cleanup when registration failed
  clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
  clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
  cpufreq: armada-37xx: Fix the AVS value for load L1
  clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
  cpufreq: armada-37xx: Fix setting TBG parent for load levels
  cpufreq: Remove unused for_each_policy macro
  cpufreq: dt: dev_pm_opp_of_cpumask_add_table() may return -EPROBE_DEFER
  cpufreq: intel_pstate: Clean up frequency computations
  cpufreq: cppc: simplify default delay_us setting
  cpufreq: Rudimentary typos fix in the file s5pv210-cpufreq.c
  cpufreq: CPPC: Add support for frequency invariance
  ia64: fix format string for ia64-acpi-cpu-freq
  cpufreq: schedutil: Call sugov_update_next_freq() before check to fast_switch_enabled
  arch_topology: Export arch_freq_scale and helpers
  ...
 2021-04-26 16:56:50 +02:00
Greg Kroah-Hartman
a00fcbc115 Linux 5.12-rc7 
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmBzdS0eHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGDdAIAIpKH/tAHhH7s7QH
 m5ewgE8foP7M5Ue9fp3+JmbtaYSzhCAMcKhqGtat/zk5PvA9AoYCDXrTetfYtBHh
 LUOmhL9hcKItNobfkYBok6BiFjGUEL3HMqz5w+MUsMwnXIc4RXqfJmsQ932z9Kxf
 yDwe6ehIzJVrQLI/C0mTamYRHu2aiZ1VWzhKuT493rLeg0R2odCCIClPN+/QvCwb
 8/sk6l1c8eOUYYMUzKFZifaZGb12qDjRt4pZmk51aMTzg0WCpElJG+7Uqr4QQhZP
 p6xeNuUQq6WwxtlDkmo79Uzkrurb5tN2/hZ1RcJhs3EdHfpR0MjIyH3Znnb31gnu
 39VjHhg=
 =4KP/
 -----END PGP SIGNATURE-----

Merge tag 'v5.12-rc7' into driver-core-next

We need the driver core fix in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2021-04-14 19:53:39 +02:00
Matti Vaittinen
42391f7e21 clk: bd718x7: Add support for clk gate on ROHM BD71815 PMIC 
ROHM BD71815 also provide clk signal for RTC. Add control
for gating this clock.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
 2021-04-14 10:21:26 +01:00
Daniel Vetter
af8352f1ff Merge tag 'drm-msm-next-2021-04-11' of https://gitlab.freedesktop.org/drm/msm into drm-next 
msm-next from Rob:
* Big DSI phy/pll cleanup. Includes some clk patches, acked by
  maintainer
* Initial support for sc7280
* compatibles fixes for sm8150/sm8250
* cleanups for all dpu gens to use same bandwidth scaling paths (\o/)
* various shrinker path lock contention optimizations
* unpin/swap support for GEM objects (disabled by default, enable with
  msm.enable_eviction=1 .. due to various combinations of iommu drivers
  with older gens I want to get more testing on hw I don't have in front
  of me before enabling by default)
* The usual assortment of misc fixes and cleanups

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvL=4aw15qoY8fbKG9FCgnx8Y-dCtf7xiFwTQSHopwSQg@mail.gmail.com
 2021-04-13 23:35:54 +02:00
Sergio Paracuellos
48df7a26f4 clk: ralink: add clock driver for mt7621 SoC 
The documentation for this SOC only talks about two
registers regarding to the clocks:
* SYSC_REG_CPLL_CLKCFG0 - provides some information about
boostrapped refclock. PLL and dividers used for CPU and some
sort of BUS.
* SYSC_REG_CPLL_CLKCFG1 - a banch of gates to enable/disable
clocks for all or some ip cores.

Looking into driver code, and some openWRT patched there are
another frequencies which are used in some drivers (uart, sd...).
According to all of this information the clock plan for this
SoC is set as follows:
- Main top clock "xtal" from where all the rest of the world is
derived.
- CPU clock "cpu" derived from "xtal" frequencies and a bunch of
register reads and predividers.
- BUS clock "bus" derived from "cpu" and with (cpu / 4) MHz.
- Fixed clocks from "xtal":
    * "50m": 50 MHz.
    * "125m": 125 MHz.
    * "150m": 150 MHz.
    * "250m": 250 MHz.
    * "270m": 270 MHz.

We also have a buch of gate clocks with their parents:
  * "hsdma": "150m"
  * "fe": "250m"
  * "sp_divtx": "270m"
  * "timer": "50m"
  * "pcm": "270m"
  * "pio": "50m"
  * "gdma": "bus"
  * "nand": "125m"
  * "i2c": "50m"
  * "i2s": "270m"
  * "spi": "bus"
  * "uart1": "50m"
  * "uart2": "50m"
  * "uart3": "50m"
  * "eth": "50m"
  * "pcie0": "125m"
  * "pcie1": "125m"
  * "pcie2": "125m"
  * "crypto": "250m"
  * "shxc": "50m"

With this information the clk driver will provide clock and gates
functionality from a a set of hardcoded clocks allowing to define
a nice device tree without fixed clocks.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210410055059.13518-2-sergio.paracuellos@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-12 19:10:54 -07:00
Colin Ian King
f6b1340dc7 clk: uniphier: Fix potential infinite loop 
The for-loop iterates with a u8 loop counter i and compares this
with the loop upper limit of num_parents that is an int type.
There is a potential infinite loop if num_parents is larger than
the u8 loop counter. Fix this by making the loop counter the same
type as num_parents.  Also make num_parents an unsigned int to
match the return type of the call to clk_hw_get_num_parents.

Addresses-Coverity: ("Infinite loop")
Fixes: 734d82f4a6 ("clk: uniphier: add core support code for UniPhier clock driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210409090104.629722-1-colin.king@canonical.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-12 19:09:59 -07:00
Alex Elder
b2150cab9a clk: qcom: rpmh: add support for SDX55 rpmh IPA clock 
The IPA core clock is required for SDX55.  Define it.

Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210409134407.841137-1-elder@linaro.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-12 17:55:22 -07:00
Dmitry Baryshkov
d63e1c765a clk: qcom: gcc-sdm845: get rid of the test clock 
The test clock isn't in the bindings and apparently it's not used by
anyone upstream.  Remove it.

Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210409183004.1617777-4-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-09 12:01:22 -07:00
Dmitry Baryshkov
ea434d7a92 clk: qcom: convert SDM845 Global Clock Controller to parent_data 
Convert the clock driver to specify parent data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210409183004.1617777-3-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-09 12:01:22 -07:00
Chen Hui
d0a859edda clk: qcom: apss-ipq-pll: Add missing MODULE_DEVICE_TABLE 
CONFIG_IPQ_APSS_PLL is tristate option and therefore this driver can
be compiled as a module. This patch adds missing MODULE_DEVICE_TABLE
definition which generates correct modalias for automatic loading of
this driver when it is built as an external module.

Fixes: ecd2bacfbb ("clk: qcom: Add ipq apss pll driver")
Signed-off-by: Chen Hui <clare.chenhui@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210409082352.233810-4-clare.chenhui@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-09 11:20:53 -07:00
Chen Hui
790b516ada clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE 
CONFIG_QCOM_A53PLL is tristate option and therefore this driver can be
compiled as a module. This patch adds missing MODULE_DEVICE_TABLE
definition which generates correct modalias for automatic loading of
this driver when it is built as an external module.

Fixes: 0c6ab1b8f8 ("clk: qcom: Add A53 PLL support")
Signed-off-by: Chen Hui <clare.chenhui@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210409082352.233810-3-clare.chenhui@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-09 11:20:53 -07:00
Chen Hui
77a618b148 clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE 
CONFIG_QCOM_A7PLL is tristate option and therefore this driver can be
compiled as a module. This patch adds missing MODULE_DEVICE_TABLE
definition which generates correct modalias for automatic loading of
this driver when it is built as an external module.

Fixes: 5a5223ffd7 ("clk: qcom: Add A7 PLL support")
Signed-off-by: Chen Hui <clare.chenhui@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210409082352.233810-2-clare.chenhui@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-09 11:20:52 -07:00
Pali Rohár
e93033aff6 clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0 
When CPU frequency is at 250 MHz and set_rate() is called with 500 MHz (L1)
quickly followed by a call with 1 GHz (L0), the CPU does not necessarily
stay in L1 for at least 20ms as is required by Marvell errata.

This situation happens frequently with the ondemand cpufreq governor and
can be also reproduced with userspace governor. In most cases it causes CPU
to crash.

This change fixes the above issue and ensures that the CPU always stays in
L1 for at least 20ms when switching from any state to L0.

Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 61c40f35f5 ("clk: mvebu: armada-37xx-periph: Fix switching CPU rate from 300Mhz to 1.2GHz")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
 2021-04-09 15:17:33 +05:30
Pali Rohár
4decb91875 clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz 
It was observed that the workaround introduced by commit 61c40f35f5
("clk: mvebu: armada-37xx-periph: Fix switching CPU rate from 300Mhz to
1.2GHz") when base CPU frequency is 1.2 GHz is also required when base
CPU frequency is 1 GHz. Otherwise switching CPU frequency directly from
L2 (250 MHz) to L0 (1 GHz) causes a crash.

When base CPU frequency is just 800 MHz no crashed were observed during
switch from L2 to L0.

Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 2089dc33ea ("clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
 2021-04-09 15:17:33 +05:30
Marek Behún
4e435a9dd2 clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock 
Remove the .set_parent method in clk_pm_cpu_ops.

This method was supposed to be needed by the armada-37xx-cpufreq driver,
but was never actually called due to wrong assumptions in the cpufreq
driver. After this was fixed in the cpufreq driver, this method is not
needed anymore.

Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Pali Rohár <pali@kernel.org>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 2089dc33ea ("clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
 2021-04-09 15:17:32 +05:30
Krzysztof Kozlowski
3684100805 clk: socfpga: fix iomem pointer cast on 64-bit 
Pointers should be cast with uintptr_t instead of integer.  This fixes
warning when compile testing on ARM64:

  drivers/clk/socfpga/clk-gate.c: In function ‘socfpga_clk_recalc_rate’:
  drivers/clk/socfpga/clk-gate.c:102:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]

Fixes: b7cec13f08 ("clk: socfpga: Look for the GPIO_DB_CLK by its offset")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-04-09 09:24:30 +02:00
Sami Tolvanen
4f0f586bf0 treewide: Change list_sort to use const pointers 
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.

Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.

Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
 2021-04-08 16:04:22 -07:00
Chen Hui
7f32917642 clk: samsung: Remove redundant dev_err calls 
There is error message within devm_ioremap_resource
already, so remove the dev_err calls to avoid redundant
error messages.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Chen Hui <clare.chenhui@huawei.com>
Link: https://lore.kernel.org/linux-clk/20210408134856.207305-1-clare.chenhui@huawei.com
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
 2021-04-08 19:35:26 +02:00
Arnd Bergmann
4be3f47e1b ARM SCMI updates for v5.13 
The major and big addition this time is to support modularisation of
 individual SCMI protocols thus enabling to add support for vendors'
 custom SCMI protocol. This changes the interface provided by the SCMI
 driver to all the users of SCMI and hence involved changes in various
 other subsystem SCMI drivers. The change has been split with a bit of
 transient code to preserve bisectability and avoiding one big patch bomb
 changing all the users.
 
 This also includes SCMI IIO driver(pulled from IIO tree) and support for
 per-cpu DVFS.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAmBkOf4ACgkQAEG6vDF+
 4phe+A//eCddPFvH5Wvdf6ff48XJOWjdrQyydnSeiKW6w2ftJTiFIfsCwhRSBcA4
 +xnv+NVUbuTbO0mRUybAKDC7C9vtJD/nuVz3od1MzhdlZa4/agZKIG8rxEc8BoB2
 0coyLzwOpbEnUIRGaGS+uebroN1UfpYws/nSHe+2J75dT2k7htYVGNZXS/5LzSmd
 8colYbYiUkv/H9S8F+GLYt17acam8rrZ1QSUtOfvXMjAN4jUv5brg2JdLBM3maGP
 4SMDqQCHLGwVle2aGqrmhjr/FNpNlUrzovIeCZHEo6wcHKoidahV/tyjWXkXRlxq
 cRA3gtcAh1nHy+Vn3SL52Cg9yGwmQQN+N0ROYPkamv55NpAI7sJY/tXcrhTmv6vl
 jVk4C60BVY1E15EOozGAag5ED0qvJCkZhbHpAoGuGOTyNucBOuDvLpZ5DI+mcTXo
 h2gGIg8RESieJHrWFTiaEzBKZG5HhLw0xxdqnEILL8GMLSS8b6ljHsnrlfoB5AYT
 roHaWmjX6Yr1KfeWsWt5igN6v/nveQm3QGTolgJT9Y580C6DQZ1rSommyMujCRS1
 NO7gCPtkarI/riG84JLNyZwq6t6t2auxQjaYkVArmdszn/M8Vgh6np35OAv7g5sS
 yJAR3BCwcXCWQhYF3XvJfxBr/u1La8lwW6CUpphHGS4BzLb08kA=
 =WLTW
 -----END PGP SIGNATURE-----

Merge tag 'scmi-updates-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers

ARM SCMI updates for v5.13

The major and big addition this time is to support modularisation of
individual SCMI protocols thus enabling to add support for vendors'
custom SCMI protocol. This changes the interface provided by the SCMI
driver to all the users of SCMI and hence involved changes in various
other subsystem SCMI drivers. The change has been split with a bit of
transient code to preserve bisectability and avoiding one big patch bomb
changing all the users.

This also includes SCMI IIO driver(pulled from IIO tree) and support for
per-cpu DVFS.

* tag 'scmi-updates-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (41 commits)
  firmware: arm_scmi: Add dynamic scmi devices creation
  firmware: arm_scmi: Add protocol modularization support
  firmware: arm_scmi: Rename non devres notify_ops
  firmware: arm_scmi: Make notify_priv really private
  firmware: arm_scmi: Cleanup events registration transient code
  firmware: arm_scmi: Cleanup unused core transfer helper wrappers
  firmware: arm_scmi: Cleanup legacy protocol init code
  firmware: arm_scmi: Make references to handle const
  firmware: arm_scmi: Remove legacy scmi_voltage_ops protocol interface
  regulator: scmi: Port driver to the new scmi_voltage_proto_ops interface
  firmware: arm_scmi: Port voltage protocol to new protocols interface
  firmware: arm_scmi: Port systempower protocol to new protocols interface
  firmware: arm_scmi: Remove legacy scmi_sensor_ops protocol interface
  iio/scmi: Port driver to the new scmi_sensor_proto_ops interface
  hwmon: (scmi) port driver to the new scmi_sensor_proto_ops interface
  firmware: arm_scmi: Port sensor protocol to new protocols interface
  firmware: arm_scmi: Remove legacy scmi_reset_ops protocol interface
  reset: reset-scmi: Port driver to the new scmi_reset_proto_ops interface
  firmware: arm_scmi: Port reset protocol to new protocols interface
  firmware: arm_scmi: Remove legacy scmi_clk_ops protocol interface
  ...

Link: https://lore.kernel.org/r/20210331100657.ilu63i4swnr3zp4e@bogus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-04-08 17:38:20 +02:00
Quanyang Wang
394cdb69a3 clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable 
If there is a IOCTL_SET_PLL_FRAC_MODE request sent to ATF ever,
we shouldn't skip invoking PM_CLOCK_ENABLE fn even though this
pll has been enabled. In ATF implementation, it will only assign
the mode to the variable (struct pm_pll *)pll->mode when handling
IOCTL_SET_PLL_FRAC_MODE call. Invoking PM_CLOCK_ENABLE can force
ATF send request to PWU to set the pll mode to PLL's register.

There is a scenario that happens in enabling VPLL_INT(clk_id:96):
1) VPLL_INT has been enabled during booting.
2) A driver calls clk_set_rate and according to the rate, the VPLL_INT
   should be set to FRAC mode. Then zynqmp_pll_set_mode is called
   to pass IOCTL_SET_PLL_FRAC_MODE to ATF. Note that at this point
   ATF just stores the mode to a variable.
3) This driver calls clk_prepare_enable and zynqmp_pll_enable is
   called to try to enable VPLL_INT pll. Because of 1), the function
   zynqmp_pll_enable just returns without doing anything after checking
   that this pll has been enabled.

In the scenario above, the pll mode of VPLL_INT will never be set
successfully. So adding set_pll_mode to check condition to fix it.

Fixes: 3fde0e16d0 ("drivers: clk: Add ZynqMP clock driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210406153131.601701-1-quanyang.wang@windriver.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-07 18:09:35 -07:00
Quanyang Wang
d7fd3f9f53 clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback 
The round_rate callback should only perform rate calculation and not
involve calling zynqmp_pll_set_mode to change the pll mode. So let's
move zynqmp_pll_set_mode out of round_rate and to set_rate callback.

Fixes: 3fde0e16d0 ("drivers: clk: Add ZynqMP clock driver")
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210406154015.602779-1-quanyang.wang@windriver.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-07 18:09:23 -07:00
Punit Agrawal
21f2375346 clk: zynqmp: Drop dependency on ARCH_ZYNQMP 
The clock driver depends on ZYNQMP_FIRMWARE which in turn depends on
ARCH_ZYNQMP. Simplify the Kconfig by dropping the redundant dependency
on ARCH_ZYNQMP as it'll be applied transitively via ZYNQMP_FIRMWARE.

Signed-off-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Link: https://lore.kernel.org/r/20210322061754.1065367-3-punit1.agrawal@toshiba.co.jp
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-07 17:26:09 -07:00
Punit Agrawal
c3ce6a4a81 clk: zynqmp: Enable the driver if ZYNQMP_FIRMWARE is selected 
When booting the kernel on zynqmp based platforms such as Ultra96v2,
peripheral drivers such as that for the sdcard depend on the presence
of clocks.

Enable the clock driver if it's dependencies are compiled to avoid
building an unbootable kernel.

Signed-off-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Link: https://lore.kernel.org/r/20210322061754.1065367-2-punit1.agrawal@toshiba.co.jp
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-07 17:26:09 -07:00
Dmitry Baryshkov
886fd9a4b4 clk: qcom: gcc-sm8350: use ARRAY_SIZE instead of specifying num_parents 
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-34-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-07 17:25:53 -07:00
Dmitry Baryshkov
c864cd5f50 clk: qcom: gcc-sm8250: use ARRAY_SIZE instead of specifying num_parents 
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-33-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-07 17:25:52 -07:00
Dmitry Baryshkov
60ca4670fd clk: qcom: gcc-sm8150: use ARRAY_SIZE instead of specifying num_parents 
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-32-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-07 17:25:52 -07:00
Dmitry Baryshkov
b6cf77a7a9 clk: qcom: gcc-sc8180x: use ARRAY_SIZE instead of specifying num_parents 
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-31-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-07 17:25:52 -07:00
Dmitry Baryshkov
e957ca2a93 clk: qcom: gcc-sc7180: use ARRAY_SIZE instead of specifying num_parents 
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-30-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-07 17:25:50 -07:00
Dmitry Baryshkov
b707291351 clk: qcom: videocc-sm8250: use parent_hws where possible 
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-29-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-07 17:22:54 -07:00
Dmitry Baryshkov
c97b6b41e9 clk: qcom: videocc-sm8150: use parent_hws where possible 
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-28-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-07 17:22:54 -07:00
Dmitry Baryshkov
55321d6fae clk: qcom: gpucc-sm8250: use parent_hws where possible 
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-27-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-07 17:22:54 -07:00
Dmitry Baryshkov
637bc9c0ab clk: qcom: gpucc-sm8150: use parent_hws where possible 
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-26-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-07 17:22:54 -07:00
Dmitry Baryshkov
097a888842 clk: qcom: gcc-sm8350: use parent_hws where possible 
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-25-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-07 17:22:54 -07:00
Dmitry Baryshkov
31192234a1 clk: qcom: gcc-sm8250: use parent_hws where possible 
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-24-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2021-04-07 17:22:54 -07:00