ZONE_DEVICE struct pages have an extra reference count that complicates
the code for put_page() and several places in the kernel that need to
check the reference count to see that a page is not being used (gup,
compaction, migration, etc.). Clean up the code so the reference count
doesn't need to be treated specially for ZONE_DEVICE pages.
Note that this excludes the special idle page wakeup for fsdax pages,
which still happens at refcount 1. This is a separate issue and will
be sorted out later. Given that only fsdax pages require the
notifiacation when the refcount hits 1 now, the PAGEMAP_OPS Kconfig
symbol can go away and be replaced with a FS_DAX check for this hook
in the put_page fastpath.
Based on an earlier patch from Ralph Campbell <rcampbell@nvidia.com>.
Link: https://lkml.kernel.org/r/20220210072828.2930359-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Christian Knig <christian.koenig@amd.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Move the check for the actual pgmap types that need the free at refcount
one behavior into the out of line helper, and thus avoid the need to
pull memremap.h into mm.h.
Link: https://lkml.kernel.org/r/20220210072828.2930359-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:10576: Error: unrecognized opcode: `stbcx.'
{standard input}:10680: Error: unrecognized opcode: `lharx'
{standard input}:10694: Error: unrecognized opcode: `lbarx'
Rework to add assembler directives [1] around the instruction. The
problem with this might be that we can trick a power6 into
single-stepping through an stbcx. for instance, and it will execute that
in kernel mode.
[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo
Fixes: 350779a29f ("powerpc: Handle most loads and stores in instruction emulation code")
Cc: stable@vger.kernel.org # v4.14+
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-3-anders.roxell@linaro.org
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:1190: Error: unrecognized opcode: `stbcix'
{standard input}:1433: Error: unrecognized opcode: `lwzcix'
{standard input}:1453: Error: unrecognized opcode: `stbcix'
{standard input}:1460: Error: unrecognized opcode: `stwcix'
{standard input}:1596: Error: unrecognized opcode: `stbcix'
...
Rework to add assembler directives [1] around the instruction. Going
through them one by one shows that the changes should be safe. Like
__get_user_atomic_128_aligned() is only called in p9_hmi_special_emu(),
which according to the name is specific to power9. And __raw_rm_read*()
are only called in things that are powernv or book3s_hv specific.
[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo
Cc: stable@vger.kernel.org
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
[mpe: Make commit subject more descriptive]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-2-anders.roxell@linaro.org
Looks like there been a copy paste mistake when added the instruction
'stbcx' twice and one was probably meant to be 'sthcx'. Changing to
'sthcx' from 'stbcx'.
Fixes: 350779a29f ("powerpc: Handle most loads and stores in instruction emulation code")
Cc: stable@vger.kernel.org # v4.14+
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-1-anders.roxell@linaro.org
When CONFIG_GENERIC_CPU=y (true for all our defconfigs) we pass
-mcpu=powerpc64 to the compiler, even when we're building a 32-bit
kernel.
This happens because we have an ifdef CONFIG_PPC_BOOK3S_64/else block in
the Makefile that was written before 32-bit supported GENERIC_CPU. Prior
to that the else block only applied to 64-bit Book3E.
The GCC man page says -mcpu=powerpc64 "[specifies] a pure ... 64-bit big
endian PowerPC ... architecture machine [type], with an appropriate,
generic processor model assumed for scheduling purposes."
It's unclear how that interacts with -m32, which we are also passing,
although obviously -m32 is taking precedence in some sense, as the
32-bit kernel only contains 32-bit instructions.
This was noticed by inspection, not via any bug reports, but it does
affect code generation. Comparing before/after code generation, there
are some changes to instruction scheduling, and the after case (with
-mcpu=powerpc64 removed) the compiler seems more keen to use r8.
Fix it by making the else case only apply to Book3E 64, which excludes
32-bit.
Fixes: 0e00a8c9fd ("powerpc: Allow CPU selection also on PPC32")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220215112858.304779-1-mpe@ellerman.id.au
Executing node_set_online() when nid = NUMA_NO_NODE results in an
undefined behavior. node_set_online() will call node_set_state(), into
__node_set(), into set_bit(), and since NUMA_NO_NODE is -1 we'll end up
doing a negative shift operation inside
arch/powerpc/include/asm/bitops.h. This potential UB was detected
running a kernel with CONFIG_UBSAN.
The behavior was introduced by commit 10f78fd0da ("powerpc/numa: Fix a
regression on memoryless node 0"), where the check for nid > 0 was
removed to fix a problem that was happening with nid = 0, but the result
is that now we're trying to online NUMA_NO_NODE nids as well.
Checking for nid >= 0 will allow node 0 to be onlined while avoiding
this UB with NUMA_NO_NODE.
Fixes: 10f78fd0da ("powerpc/numa: Fix a regression on memoryless node 0")
Reported-by: Ping Fang <pifang@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224182312.1012527-1-danielhb413@gmail.com
Crash recovery (fadump) is setup in the userspace by some service. This
service rebuilds initrd with dump capture capability, if it is not
already dump capture capable before proceeding to register for firmware
assisted dump (echo 1 > /sys/kernel/fadump/registered). But arming the
kernel with crash recovery support does not have to wait for userspace
configuration. So, register for fadump while setting it up itself. This
can at worst lead to a scenario, where /proc/vmcore is ready afer crash
but the initrd does not know how/where to offload it, which is always
better than not having a /proc/vmcore at all due to incomplete
configuration in the userspace at the time of crash.
Commit 0823c68b05 ("powerpc/fadump: re-register firmware-assisted dump
if already registered") ensures this change does not break userspace.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
[mpe: Reword comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220201105305.155511-1-hbathini@linux.ibm.com
One of the things that CONFIG_HARDENED_USERCOPY sanity-checks is whether
an object that is about to be copied to/from userspace is overlapping
the stack at all. If it is, it performs a number of inexpensive
bounds checks. One of the finer-grained checks is whether an object
crosses stack frames within the stack region. Doing this on x86 with
CONFIG_FRAME_POINTER was cheap/easy. Doing it with ORC was deemed too
heavy, and was left out (a while ago), leaving the courser whole-stack
check.
The LKDTM tests USERCOPY_STACK_FRAME_TO and USERCOPY_STACK_FRAME_FROM
try to exercise these cross-frame cases to validate the defense is
working. They have been failing ever since ORC was added (which was
expected). While Muhammad was investigating various LKDTM failures[1],
he asked me for additional details on them, and I realized that when
exact stack frame boundary checking is not available (i.e. everything
except x86 with FRAME_POINTER), it could check if a stack object is at
least "current depth valid", in the sense that any object within the
stack region but not between start-of-stack and current_stack_pointer
should be considered unavailable (i.e. its lifetime is from a call no
longer present on the stack).
Introduce ARCH_HAS_CURRENT_STACK_POINTER to track which architectures
have actually implemented the common global register alias.
Additionally report usercopy bounds checking failures with an offset
from current_stack_pointer, which may assist with diagnosing failures.
The LKDTM USERCOPY_STACK_FRAME_TO and USERCOPY_STACK_FRAME_FROM tests
(once slightly adjusted in a separate patch) pass again with this fixed.
[1] https://github.com/kernelci/kernelci-project/issues/84
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
v1: https://lore.kernel.org/lkml/20220216201449.2087956-1-keescook@chromium.org
v2: https://lore.kernel.org/lkml/20220224060342.1855457-1-keescook@chromium.org
v3: https://lore.kernel.org/lkml/20220225173345.3358109-1-keescook@chromium.org
v4: - improve commit log (akpm)
Christoph Hellwig and a few others spent a huge effort on removing
set_fs() from most of the important architectures, but about half the
other architectures were never completed even though most of them don't
actually use set_fs() at all.
I did a patch for microblaze at some point, which turned out to be fairly
generic, and now ported it to most other architectures, using new generic
implementations of access_ok() and __{get,put}_kernel_nocheck().
Three architectures (sparc64, ia64, and sh) needed some extra work,
which I also completed.
* 'set_fs-4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
uaccess: fix integer overflow on access_ok()
There are many different ways that access_ok() is defined across
architectures, but in the end, they all just compare against the
user_addr_max() value or they accept anything.
Provide one definition that works for most architectures, checking
against TASK_SIZE_MAX for user processes or skipping the check inside
of uaccess_kernel() sections.
For architectures without CONFIG_SET_FS(), this should be the fastest
check, as it comes down to a single comparison of a pointer against a
compile-time constant, while the architecture specific versions tend to
do something more complex for historic reasons or get something wrong.
Type checking for __user annotations is handled inconsistently across
architectures, but this is easily simplified as well by using an inline
function that takes a 'const void __user *' argument. A handful of
callers need an extra __user annotation for this.
Some architectures had trick to use 33-bit or 65-bit arithmetic on the
addresses to calculate the overflow, however this simpler version uses
fewer registers, which means it can produce better object code in the
end despite needing a second (statically predicted) branch.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64, asm-generic]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On some architectures, access_ok() does not do any argument type
checking, so replacing the definition with a generic one causes
a few warnings for harmless issues that were never caught before.
Fix the ones that I found either through my own test builds or
that were reported by the 0-day bot.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Nine architectures are still missing __{get,put}_kernel_nofault:
alpha, ia64, microblaze, nds32, nios2, openrisc, sh, sparc32, xtensa.
Add a generic version that lets everything use the normal
copy_{from,to}_kernel_nofault() code based on these, removing the last
use of get_fs()/set_fs() from architecture-independent code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix following coccicheck warning:
./arch/powerpc/kernel/module_64.c:432:40-41: WARNING: Use ARRAY_SIZE.
ARRAY_SIZE(arr) is a macro provided by the kernel. It makes sure that arr
is an array, so it's safer than sizeof(arr) / sizeof(arr[0]) and more
standard.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220223075426.20939-1-guozhengkui@vivo.com
Hash faults are not resoved in NMI context, instead causing the access
to fail. This is done because perf interrupts can get backtraces
including walking the user stack, and taking a hash fault on those could
deadlock on the HPTE lock if the perf interrupt hits while the same HPTE
lock is being held by the hash fault code. The user-access for the stack
walking will notice the access failed and deal with that in the perf
code.
The reason to allow perf interrupts in is to better profile hash faults.
The problem with this is any hash fault on a kernel access that happens
in NMI context will crash, because kernel accesses must not fail.
Hard lockups, system reset, machine checks that access vmalloc space
including modules and including stack backtracing and symbol lookup in
modules, per-cpu data, etc could all run into this problem.
Fix this by disallowing perf interrupts in the hash fault code (the
direct hash fault is covered by MSR[EE]=0 so the PMI disable just needs
to extend to the preload case). This simplifies the tricky logic in hash
faults and perf, at the cost of reduced profiling of hash faults.
perf can still latch addresses when interrupts are disabled, it just
won't get the stack trace at that point, so it would still find hot
spots, just sometimes with confusing stack chains.
An alternative could be to allow perf interrupts here but always do the
slowpath stack walk if we are in nmi context, but that slows down all
perf interrupt stack walking on hash though and it does not remove as
much tricky code.
Reported-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204035348.545435-1-npiggin@gmail.com
Add these PCI class codes to pci_ids.h:
PCI_CLASS_BRIDGE_PCI_NORMAL
PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE
Use these defines in all kernel code for describing PCI class codes for
normal and subtractive PCI bridges.
[bhelgaas: similar change in pci-mvebu.c]
Link: https://lore.kernel.org/r/20220214114109.26809-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
asm/shmbuf.h is currently excluded from the UAPI compile-test because of
the errors like follows:
HDRTEST usr/include/asm/shmbuf.h
In file included from ./usr/include/asm/shmbuf.h:6,
from <command-line>:
./usr/include/asm-generic/shmbuf.h:26:33: error: field ‘shm_perm’ has incomplete type
26 | struct ipc64_perm shm_perm; /* operation perms */
| ^~~~~~~~
./usr/include/asm-generic/shmbuf.h:27:9: error: unknown type name ‘size_t’
27 | size_t shm_segsz; /* size of segment (bytes) */
| ^~~~~~
./usr/include/asm-generic/shmbuf.h:40:9: error: unknown type name ‘__kernel_pid_t’
40 | __kernel_pid_t shm_cpid; /* pid of creator */
| ^~~~~~~~~~~~~~
./usr/include/asm-generic/shmbuf.h:41:9: error: unknown type name ‘__kernel_pid_t’
41 | __kernel_pid_t shm_lpid; /* pid of last operator */
| ^~~~~~~~~~~~~~
The errors can be fixed by replacing size_t with __kernel_size_t and by
including proper headers.
Then, remove the no-header-test entry from user/include/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
linux/signal.h and asm/signal.h are currently excluded from the UAPI
compile-test because of the errors like follows:
HDRTEST usr/include/asm/signal.h
In file included from <command-line>:
./usr/include/asm/signal.h:103:9: error: unknown type name ‘size_t’
103 | size_t ss_size;
| ^~~~~~
The errors can be fixed by replacing size_t with __kernel_size_t.
Then, remove the no-header-test entries from user/include/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dereference_function_descriptor() and
dereference_kernel_function_descriptor() are identical on the
three architectures implementing them.
Make them common and put them out-of-line in kernel/extable.c
which is one of the users and has similar type of functions.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/449db09b2eba57f4ab05f80102a67d8675bc8bcd.1644928018.git.christophe.leroy@csgroup.eu
We have three architectures using function descriptors, each with its
own type and name.
Add a common typedef that can be used in generic code.
Also add a stub typedef for architecture without function descriptors,
to avoid a forest of #ifdefs.
It replaces the similar 'func_desc_t' previously defined in
arch/powerpc/kernel/module_64.c
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f1f91b142b3c1082bdc1586ce71c9bac1e75213c.1644928018.git.christophe.leroy@csgroup.eu
Replace HAVE_DEREFERENCE_FUNCTION_DESCRIPTOR by a config option
named CONFIG_HAVE_FUNCTION_DESCRIPTORS and use it instead of
'dereference_function_descriptor' macro to know whether an
arch has function descriptors.
To limit churn in one of the following patches, use
an #ifdef/#else construct with empty first part
instead of an #ifndef in asm-generic/sections.h
On powerpc, make sure the config option matches the ABI used
by the compiler with a BUILD_BUG_ON() and add missing _CALL_ELF=2
when calling 'sparse' so that sparse sees the same piece of
code as GCC.
And include a helper to check whether an arch has function
descriptors or not : have_function_descriptors()
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4a0f11fb0ea74a3197bc44dd7ba25e53a24fd03d.1644928018.git.christophe.leroy@csgroup.eu
In preparation of making func_desc_t generic, change the ELFv2
version to a struct containing 'addr' element.
This allows using single helpers common to ELFv1 and ELFv2 and
reduces the amount of #ifdef's
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5c36105e08b27b98450535bff48d71b690c19739.1644928018.git.christophe.leroy@csgroup.eu
'struct ppc64_opd_entry' doesn't belong to uapi/asm/elf.h
It was initially in module_64.c and commit 2d291e9027 ("Fix compile
failure with non modular builds") moved it into asm/elf.h
But it was by mistake added outside of __KERNEL__ section,
therefore commit c3617f7203 ("UAPI: (Scripted) Disintegrate
arch/powerpc/include/asm") moved it to uapi/asm/elf.h
Now that it is not used anymore by the kernel, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c309ccee65ec2e3802df7a7fe761d0a298584809.1644928018.git.christophe.leroy@csgroup.eu
'struct ppc64_opd_entry' is somehow redundant with 'struct func_desc',
the later is more correct/complete as it includes the third
field which is unused.
So use 'struct func_desc' instead of 'struct ppc64_opd_entry'
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/34e76bac6cbe95a63ecd37df69fb7feb93b0ea7c.1644928018.git.christophe.leroy@csgroup.eu
There are three architectures with function descriptors, try to
have common names for the address they contain in order to
refactor some functions into generic functions later.
powerpc has 'entry'
ia64 has 'ip'
parisc has 'addr'
Vote for 'addr' and update 'func_descr_t' accordingly.
Move it in asm/elf.h to have it at the same place on all
three architectures, remove the typedef which hides its real
type, and change it to a smoother name 'struct func_desc'.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/529b2ba1d001e8f628ef0d30e8044c9b3d0a4921.1644928018.git.christophe.leroy@csgroup.eu
'sparse' is architecture agnostic and knows nothing about ELF ABI
version.
Just like it gets arch and powerpc type and endian from Makefile,
it also need to get _CALL_ELF from there, otherwise it won't set
PPC64_ELF_ABI_v2 macro for PPC64le and won't check the correct code.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ac1312f2451aa558bb2a8806b4d0aa2020f0c176.1644928018.git.christophe.leroy@csgroup.eu
Presently PAPR doesn't support injecting smart errors on an
NVDIMM. This makes testing the NVDIMM health reporting functionality
difficult as simulating NVDIMM health related events need a hacked up
qemu version.
To solve this problem this patch proposes simulating certain set of
NVDIMM health related events in papr_scm. Specifically 'fatal' health
state and 'dirty' shutdown state. These error can be injected via the
user-space 'ndctl-inject-smart(1)' command. With the proposed patch and
corresponding ndctl patches following command flow is expected:
$ sudo ndctl list -DH -d nmem0
...
"health_state":"ok",
"shutdown_state":"clean",
...
# inject unsafe shutdown and fatal health error
$ sudo ndctl inject-smart nmem0 -Uf
...
"health_state":"fatal",
"shutdown_state":"dirty",
...
# uninject all errors
$ sudo ndctl inject-smart nmem0 -N
...
"health_state":"ok",
"shutdown_state":"clean",
...
The patch adds a new member 'health_bitmap_inject_mask' inside struct
papr_scm_priv which is then bitwise ANDed to the health bitmap fetched from the
hypervisor. The value for 'health_bitmap_inject_mask' is accessible from sysfs
at nmemX/papr/health_bitmap_inject.
A new PDSM named 'SMART_INJECT' is proposed that accepts newly
introduced 'struct nd_papr_pdsm_smart_inject' as payload thats
exchanged between libndctl and papr_scm to indicate the requested
smart-error states.
When the processing the PDSM 'SMART_INJECT', papr_pdsm_smart_inject()
constructs a pair or 'inject_mask' and 'clear_mask' bitmaps from the payload
and bit-blt it to the 'health_bitmap_inject_mask'. This ensures the after being
fetched from the hypervisor, the health_bitmap reflects requested smart-error
states.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220124202204.1488346-1-vaibhav@linux.ibm.com
Add some line breaks to better match the file's style, add
some space after comma and fix a couple of misplaced blanks.
Suggested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/973506292d0c7b05c06530c8e11803ce38e5eda2.1644949750.git.christophe.leroy@csgroup.eu
When FL_SAVE_REGS is not set we get here via ftrace_caller()
which doesn't save all registers.
ftrace_caller() explicitely clears regs.msr, so we can rely
on it to know where we come from. We don't expect MSR register
to be 0 at all when involving ftrace.
Fixes: 40b035efe2 ("powerpc/ftrace: Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS")
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2f9a7e898c93cc7438ef5ccd47cb9c3a9c5b53ef.1644949750.git.christophe.leroy@csgroup.eu
The function_graph_enter() does not provide any recursion protection.
Add a protection in prepare_ftrace_return() in case
function_graph_enter() calls something that gets
function graph traced.
Fixes: 830213786c ("powerpc/ftrace: directly call of function graph tracer by ftrace caller")
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/74edf2ff0a60e66b0d9225a137100a86a0557032.1644949750.git.christophe.leroy@csgroup.eu
Also save r1 in ftrace_caller()
r1 is needed during unwinding when the function_graph tracer
is active.
Fixes: 830213786c ("powerpc/ftrace: directly call of function graph tracer by ftrace caller")
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ff535e86d3a69376a6d89168511d4e403835f18b.1644949750.git.christophe.leroy@csgroup.eu
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:2088: Error: unrecognized opcode: `ptesync'
make[3]: *** [/builds/linux/scripts/Makefile.build:287: arch/powerpc/lib/sstep.o] Error 1
Add the 'ifdef CONFIG_PPC64' around the 'ptesync' in function
'emulate_update_regs()' to like it is in 'analyse_instr()'. Since it looks like
it got dropped inadvertently by commit 3cdfcbfd32 ("powerpc: Change
analyse_instr so it doesn't modify *regs").
A key detail is that analyse_instr() will never recognise lwsync or
ptesync on 32-bit (because of the existing ifdef), and as a result
emulate_update_regs() should never be called with an op specifying
either of those on 32-bit. So removing them from emulate_update_regs()
should be a nop in terms of runtime behaviour.
Fixes: 3cdfcbfd32 ("powerpc: Change analyse_instr so it doesn't modify *regs")
Cc: stable@vger.kernel.org # v4.14+
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
[mpe: Add last paragraph of change log mentioning analyse_instr() details]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220211005113.1361436-1-anders.roxell@linaro.org
Currently, `git status` lists the file as untracked by git, so tell git
to ignore it.
Fixes: aa3bc365ee ("powerpc/ps3: Add check for otheros image size")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220214065543.198992-1-pmenzel@molgen.mpg.de
Warnings in assembly must use EMIT_WARN_ENTRY in order to generate
the necessary entry in exception table.
Check in EMIT_BUG_ENTRY that flags don't include BUGFLAG_WARNING.
This change avoids problems like the one fixed by
commit fd1eaaaaa6 ("powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug
warnings").
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ddcb422102a37eb45f57694c7ef0ec6187964dff.1644742951.git.christophe.leroy@csgroup.eu
Our skiroot_defconfig doesn't enable FTRACE, and so doesn't get
STACKTRACE enabled either. That leads to a build failure since commit
1614b2b11f ("arch: Make ARCH_STACKWALK independent of STACKTRACE")
made stacktrace.c build even when STACKTRACE=n.
arch/powerpc/kernel/stacktrace.c: In function ‘handle_backtrace_ipi’:
arch/powerpc/kernel/stacktrace.c:171:2: error: implicit declaration of function ‘nmi_cpu_backtrace’
171 | nmi_cpu_backtrace(regs);
| ^~~~~~~~~~~~~~~~~
arch/powerpc/kernel/stacktrace.c: In function ‘arch_trigger_cpumask_backtrace’:
arch/powerpc/kernel/stacktrace.c:226:2: error: implicit declaration of function ‘nmi_trigger_cpumask_backtrace’
226 | nmi_trigger_cpumask_backtrace(mask, exclude_self, raise_backtrace_ipi);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This happens because our headers haven't defined
arch_trigger_cpumask_backtrace, which causes lib/nmi_backtrace.c not to
build nmi_cpu_backtrace().
The code in question doesn't actually depend on STACKTRACE=y, that was
just added because arch_trigger_cpumask_backtrace() lived in
stacktrace.c for convenience. So drop the dependency on
CONFIG_STACKTRACE, that causes lib/nmi_backtrace.c to build
nmi_cpu_backtrace() etc. and fixes the build.
Fixes: 1614b2b11f ("arch: Make ARCH_STACKWALK independent of STACKTRACE")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220212111349.2806972-1-mpe@ellerman.id.au
commit: d9c2340052 ("Do not depend on MAX_ORDER when grouping pages by mobility")
introduced pageblock_order which will be used to group pages better.
The kernel now groups pages based on the value of HPAGE_SHIFT. Hence HPAGE_SHIFT
should be set before we call set_pageblock_order.
set_pageblock_order happens early in the boot and default hugetlb page size
should be initialized before that to compute the right pageblock_order value.
Currently, default hugetlbe page size is set via arch_initcalls which happens
late in the boot as shown via the below callstack:
[c000000007383b10] [c000000001289328] hugetlbpage_init+0x2b8/0x2f8
[c000000007383bc0] [c0000000012749e4] do_one_initcall+0x14c/0x320
[c000000007383c90] [c00000000127505c] kernel_init_freeable+0x410/0x4e8
[c000000007383da0] [c000000000012664] kernel_init+0x30/0x15c
[c000000007383e10] [c00000000000cf14] ret_from_kernel_thread+0x5c/0x64
and the pageblock_order initialization is done early during the boot.
[c0000000018bfc80] [c0000000012ae120] set_pageblock_order+0x50/0x64
[c0000000018bfca0] [c0000000012b3d94] sparse_init+0x188/0x268
[c0000000018bfd60] [c000000001288bfc] initmem_init+0x28c/0x328
[c0000000018bfe50] [c00000000127b370] setup_arch+0x410/0x480
[c0000000018bfed0] [c00000000127401c] start_kernel+0xb8/0x934
[c0000000018bff90] [c00000000000d984] start_here_common+0x1c/0x98
delaying default hugetlb page size initialization implies the kernel will
initialize pageblock_order to (MAX_ORDER - 1) which is not an optimal
value for mobility grouping. IIUC we always had this issue. But it was not
a problem for hash translation mode because (MAX_ORDER - 1) is the same as
HUGETLB_PAGE_ORDER (8) in the case of hash (16MB). With radix,
HUGETLB_PAGE_ORDER will be 5 (2M size) and hence pageblock_order should be
5 instead of 8.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220211065215.101767-1-aneesh.kumar@linux.ibm.com
pseries_devicetree_update() has only one call site, in the same file in
which it is defined. Make it static.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220207221247.354454-1-nathanl@linux.ibm.com
cvdso_call_time macro is very similar to cvdso_call macro.
Add a call_time argument to cvdso_call which is 0 by default
and set to 1 when using cvdso_call to call __c_kernel_time().
Return returned value as is with CR[SO] cleared when it is used
for time().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/837a260ad86fc1ce297a562c2117fd69be5f7b5c.1642782130.git.christophe.leroy@csgroup.eu
In order to merge vdso32 and vdso64 build in following patch, rework
Makefile is order to add -32 suffix to VDSO32 object files.
Also change sigtramp.S to sigtramp32.S as VDSO64 sigtramp.S is too
different to be squashed into VDSO32 sigtramp.S at the first place.
gen_vdso_offsets.sh also becomes gen_vdso32_offsets.sh
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0c421b704a57b228e75a891512568339c53667ad.1642782130.git.christophe.leroy@csgroup.eu
VDSO64 cacheflush.S datapage.S gettimeofday.S and vgettimeofday.c
are very similar to their VDSO32 counterpart.
VDSO32 counterpart is already more complete than the VDSO64 version
as it supports both PPC32 vdso and 32 bits VDSO for PPC64.
Use compat macros wherever necessary in PPC32 files
so that they can also be used to build VDSO64.
vdso64/note.S is already a link to vdso32/note.S so
no change is required.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c2cbb8f046b7efc251053521dc39b752795e26b7.1642782130.git.christophe.leroy@csgroup.eu
The book3s/32 MMU doesn't support per page execution protection and
doesn't support RO protection for kernel pages.
However, on the 603 which implements software loaded TLBs, execution
protection is honored by the TLB Miss handler which doesn't load
Instruction TLB for non executable pages. And RO protection is
honored by clearing the C bit for RO pages, leading to DSI.
So on the 603, STRICT_MODULE_RWX is possible without much effort.
Don't disable STRICT_MODULE_RWX on book3s/32 and print a warning
in case STRICT_MODULE_RWX has been selected and the platform has
a Hardware HASH MMU.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1e6162f334167e75f1140082932e3a354b16daba.1642413973.git.christophe.leroy@csgroup.eu
BPF_REG_5, BPF_REG_AX and TMP_REG are mapped on non volatile registers
because there are not enough volatile registers, but they don't need
to be preserved on function calls.
So when some volatile registers become available, those registers can
always be reallocated regardless of whether SEEN_FUNC is set or not.
Suggested-by: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b04c246874b716911139c04bc004b3b14eed07ef.1641817763.git.christophe.leroy@csgroup.eu
set_memory_attr() was implemented by commit 4d1755b6a7 ("powerpc/mm:
implement set_memory_attr()") because the set_memory_xx() couldn't
be used at that time to modify memory "on the fly" as explained it
the commit.
But set_memory_attr() uses set_pte_at() which leads to warnings when
CONFIG_DEBUG_VM is selected, because set_pte_at() is unexpected for
updating existing page table entries.
The check could be bypassed by using __set_pte_at() instead,
as it was the case before commit c988cfd38e ("powerpc/32:
use set_memory_attr()") but since commit 9f7853d760 ("powerpc/mm:
Fix set_memory_*() against concurrent accesses") it is now possible
to use set_memory_xx() functions to update page table entries
"on the fly" because the update is now atomic.
For DEBUG_PAGEALLOC we need to clear and set back _PAGE_PRESENT.
Add set_memory_np() and set_memory_p() for that.
Replace all uses of set_memory_attr() by the relevant set_memory_xx()
and remove set_memory_attr().
Fixes: c988cfd38e ("powerpc/32: use set_memory_attr()")
Cc: stable@vger.kernel.org
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Depends-on: 9f7853d760 ("powerpc/mm: Fix set_memory_*() against concurrent accesses")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cda2b44b55c96f9ac69fa92e68c01084ec9495c5.1640344012.git.christophe.leroy@csgroup.eu
Commit 1f9ad21c3b ("powerpc/mm: Implement set_memory() routines")
included a spin_lock() to change_page_attr() in order to
safely perform the three step operations. But then
commit 9f7853d760 ("powerpc/mm: Fix set_memory_*() against
concurrent accesses") modify it to use pte_update() and do
the operation safely against concurrent access.
In the meantime, Maxime reported some spinlock recursion.
[ 15.351649] BUG: spinlock recursion on CPU#0, kworker/0:2/217
[ 15.357540] lock: init_mm+0x3c/0x420, .magic: dead4ead, .owner: kworker/0:2/217, .owner_cpu: 0
[ 15.366563] CPU: 0 PID: 217 Comm: kworker/0:2 Not tainted 5.15.0+ #523
[ 15.373350] Workqueue: events do_free_init
[ 15.377615] Call Trace:
[ 15.380232] [e4105ac0] [800946a4] do_raw_spin_lock+0xf8/0x120 (unreliable)
[ 15.387340] [e4105ae0] [8001f4ec] change_page_attr+0x40/0x1d4
[ 15.393413] [e4105b10] [801424e0] __apply_to_page_range+0x164/0x310
[ 15.400009] [e4105b60] [80169620] free_pcp_prepare+0x1e4/0x4a0
[ 15.406045] [e4105ba0] [8016c5a0] free_unref_page+0x40/0x2b8
[ 15.411979] [e4105be0] [8018724c] kasan_depopulate_vmalloc_pte+0x6c/0x94
[ 15.418989] [e4105c00] [801424e0] __apply_to_page_range+0x164/0x310
[ 15.425451] [e4105c50] [80187834] kasan_release_vmalloc+0xbc/0x134
[ 15.431898] [e4105c70] [8015f7a8] __purge_vmap_area_lazy+0x4e4/0xdd8
[ 15.438560] [e4105d30] [80160d10] _vm_unmap_aliases.part.0+0x17c/0x24c
[ 15.445283] [e4105d60] [801642d0] __vunmap+0x2f0/0x5c8
[ 15.450684] [e4105db0] [800e32d0] do_free_init+0x68/0x94
[ 15.456181] [e4105dd0] [8005d094] process_one_work+0x4bc/0x7b8
[ 15.462283] [e4105e90] [8005d614] worker_thread+0x284/0x6e8
[ 15.468227] [e4105f00] [8006aaec] kthread+0x1f0/0x210
[ 15.473489] [e4105f40] [80017148] ret_from_kernel_thread+0x14/0x1c
Remove the read / modify / write sequence to make the operation atomic
and remove the spin_lock() in change_page_attr().
To do the operation atomically, we can't use pte modification helpers
anymore. Because all platforms have different combination of bits, it
is not easy to use those bits directly. But all have the
_PAGE_KERNEL_{RO/ROX/RW/RWX} set of flags. All we need it to compare
two sets to know which bits are set or cleared.
For instance, by comparing _PAGE_KERNEL_ROX and _PAGE_KERNEL_RO you
know which bit gets cleared and which bit get set when changing exec
permission.
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/all/20211212112152.GA27070@sakura/
Link: https://lore.kernel.org/r/43c3c76a1175ae6dc1a3d3b5c3f7ecb48f683eea.1640344012.git.christophe.leroy@csgroup.eu
Modern compilers are perfectly capable of extracting parallelism from
the XOR routines, provided that the prototypes reflect the nature of the
input accurately, in particular, the fact that the input vectors are
expected not to overlap. This is not documented explicitly, but is
implied by the interchangeability of the various C routines, some of
which use temporary variables while others don't: this means that these
routines only behave identically for non-overlapping inputs.
So let's decorate these input vectors with the __restrict modifier,
which informs the compiler that there is no overlap. While at it, make
the input-only vectors pointer-to-const as well.
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/563
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-02-09
We've added 126 non-merge commits during the last 16 day(s) which contain
a total of 201 files changed, 4049 insertions(+), 2215 deletions(-).
The main changes are:
1) Add custom BPF allocator for JITs that pack multiple programs into a huge
page to reduce iTLB pressure, from Song Liu.
2) Add __user tagging support in vmlinux BTF and utilize it from BPF
verifier when generating loads, from Yonghong Song.
3) Add per-socket fast path check guarding from cgroup/BPF overhead when
used by only some sockets, from Pavel Begunkov.
4) Continued libbpf deprecation work of APIs/features and removal of their
usage from samples, selftests, libbpf & bpftool, from Andrii Nakryiko
and various others.
5) Improve BPF instruction set documentation by adding byte swap
instructions and cleaning up load/store section, from Christoph Hellwig.
6) Switch BPF preload infra to light skeleton and remove libbpf dependency
from it, from Alexei Starovoitov.
7) Fix architecture-agnostic macros in libbpf for accessing syscall
arguments from BPF progs for non-x86 architectures,
from Ilya Leoshkevich.
8) Rework port members in struct bpf_sk_lookup and struct bpf_sock to be
of 16-bit field with anonymous zero padding, from Jakub Sitnicki.
9) Add new bpf_copy_from_user_task() helper to read memory from a different
task than current. Add ability to create sleepable BPF iterator progs,
from Kenny Yu.
10) Implement XSK batching for ice's zero-copy driver used by AF_XDP and
utilize TX batching API from XSK buffer pool, from Maciej Fijalkowski.
11) Generate temporary netns names for BPF selftests to avoid naming
collisions, from Hangbin Liu.
12) Implement bpf_core_types_are_compat() with limited recursion for
in-kernel usage, from Matteo Croce.
13) Simplify pahole version detection and finally enable CONFIG_DEBUG_INFO_DWARF5
to be selected with CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor.
14) Misc minor fixes to libbpf and selftests from various folks.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (126 commits)
selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup
bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide
libbpf: Fix compilation warning due to mismatched printf format
selftests/bpf: Test BPF_KPROBE_SYSCALL macro
libbpf: Add BPF_KPROBE_SYSCALL macro
libbpf: Fix accessing the first syscall argument on s390
libbpf: Fix accessing the first syscall argument on arm64
libbpf: Allow overriding PT_REGS_PARM1{_CORE}_SYSCALL
selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390
libbpf: Fix accessing syscall arguments on riscv
libbpf: Fix riscv register names
libbpf: Fix accessing syscall arguments on powerpc
selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macro
libbpf: Add PT_REGS_SYSCALL_REGS macro
selftests/bpf: Fix an endianness issue in bpf_syscall_macro test
bpf: Fix bpf_prog_pack build HPAGE_PMD_SIZE
bpf: Fix leftover header->pages in sparc and powerpc code.
libbpf: Fix signedness bug in btf_dump_array_data()
selftests/bpf: Do not export subtest as standalone test
bpf, x86_64: Fail gracefully on bpf_jit_binary_pack_finalize failures
...
====================
Link: https://lore.kernel.org/r/20220209210050.8425-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace header->pages * PAGE_SIZE with new header->size.
Fixes: ed2d9e1a26 ("bpf: Use size instead of pages in bpf_binary_header")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220208220509.4180389-2-song@kernel.org
Modify function graph tracer to be handled directly by the standard
ftrace caller.
This is made possible as powerpc now supports
CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
This change simplifies the call of function graph ftrace.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/04d196585ff81bde06a000bd9c633a33a5b21130.1640017960.git.christophe.leroy@csgroup.eu
ftrace_enable_ftrace_graph_caller() and
ftrace_disable_ftrace_graph_caller() have common code.
They will have even more common code after following patch.
Refactor into a single ftrace_modify_ftrace_graph_caller() function.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f37785a531f1a8f201e1b3da45997a5c77e9d820.1640017960.git.christophe.leroy@csgroup.eu
Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS. It accelerates the call
of livepatching.
Also note that powerpc being the last one to convert to
CONFIG_DYNAMIC_FTRACE_WITH_ARGS, it will now be possible to remove
klp_arch_set_pc() on all architectures.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5831f711a778fcd6eb51eb5898f1faae4378b35b.1640017960.git.christophe.leroy@csgroup.eu
PPC64 needs some special logic to properly set up the TOC.
See commit 85baa09549 ("powerpc/livepatch: Add live patching support
on ppc64le") for details.
PPC32 doesn't have TOC so it doesn't need that logic, so adding
LIVEPATCH support is straight forward.
Add CONFIG_LIVEPATCH_64 and move livepatch stack logic into that item.
Livepatch sample modules all work.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/63cb094125b6a6038c65eeac2abaabbabe63addd.1640017960.git.christophe.leroy@csgroup.eu
Livepatching a loaded module involves applying relocations through
apply_relocate_add(), which attempts to write to read-only memory when
CONFIG_STRICT_MODULE_RWX=y.
R_PPC_ADDR16_LO, R_PPC_ADDR16_HI, R_PPC_ADDR16_HA and R_PPC_REL24 are
the types generated by the kpatch-build userspace tool or klp-convert
kernel tree observed applying a relocation to a post-init module.
Use patch_instruction() to patch those relocations.
Commit 8734b41b3e ("powerpc/module_64: Fix livepatching for
RO modules") did similar change in module_64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d5697157cb7dba3927e19aa17c915a83bc550bb2.1640017960.git.christophe.leroy@csgroup.eu
Allthough kernel text is always mapped with BATs, we still have
inittext mapped with pages, so TLB miss handling is required
when CONFIG_DEBUG_PAGEALLOC or CONFIG_KFENCE is set.
The final solution should be to set a BAT that also maps inittext
but that BAT then needs to be cleared at end of init, and it will
require more changes to be able to do it properly.
As DEBUG_PAGEALLOC or KFENCE are debugging, performance is not a big
deal so let's fix it simply for now to enable easy stable application.
Fixes: 035b19a15a ("powerpc/32s: Always map kernel text and rodata with BATs")
Cc: stable@vger.kernel.org # v5.11+
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/aea33b4813a26bdb9378b5f273f00bd5d4abe240.1638857364.git.christophe.leroy@csgroup.eu
On large config LPARs (having 192 and more cores), Linux fails to boot
due to insufficient memory in the first memblock. It is due to the
memory reservation for the crash kernel which starts at 128MB offset of
the first memblock. This memory reservation for the crash kernel doesn't
leave enough space in the first memblock to accommodate other essential
system resources.
The crash kernel start address was set to 128MB offset by default to
ensure that the crash kernel get some memory below the RMA region which
is used to be of size 256MB. But given that the RMA region size can be
512MB or more, setting the crash kernel offset to mid of RMA size will
leave enough space for the kernel to allocate memory for other system
resources.
Since the above crash kernel offset change is only applicable to the LPAR
platform, the LPAR feature detection is pushed before the crash kernel
reservation. The rest of LPAR specific initialization will still
be done during pseries_probe_fw_features as usual.
This patch is dependent on changes to paca allocation for boot CPU. It
expect boot CPU to discover 1T segment support which is introduced by
the patch posted here:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-January/239175.html
Reported-by: Abdul haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204085601.107257-1-sourabhjain@linux.ibm.com
arch/powerpc/include/asm/nohash/{32/64}/pgtable.h has
#define __HAVE_ARCH_PTE_SAME
#define pte_same(A,B) ((pte_val(A) ^ pte_val(B)) == 0)
include/linux/pgtable.h has
#ifndef __HAVE_ARCH_PTE_SAME
static inline int pte_same(pte_t pte_a, pte_t pte_b)
{
return pte_val(pte_a) == pte_val(pte_b);
}
#endif
Remove the powerpc version which is similar to the generic one.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/83c97bd58a3596ef1b0ff28b1e41fd492d005520.1643616989.git.christophe.leroy@csgroup.eu
On book3s/32 MMU, PP bits don't offer kernel RO protection,
kernel pages are always RW.
However, on the 603 a page fault is always generated when the
C bit (change bit = dirty bit) is not set.
Enforce kernel RO protection by clearing C bit in TLB miss
handler when the page doesn't have _PAGE_RW flag.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bbb13848ff0100a76ee9ea95118058c30ae95f2c.1643613343.git.christophe.leroy@csgroup.eu
'xive_irq_bitmap_add()' can return -ENOMEM.
In this case, we should free the memory already allocated and return
'false' to the caller.
Also add an error path which undoes the 'tima = ioremap(...)'
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/564998101804886b151235c8a9f93020923bfd2c.1643718324.git.christophe.jaillet@wanadoo.fr
Trace IMC (In-Memory collection counters) in powerpc is useful for
application level profiling.
For trace_imc, presently task context (task_ctx_nr) is set to
perf_hw_context. But perf_hw_context should only be used for CPU PMU.
See commit 2665784850 ("perf/core: Verify we have a single
perf_hw_context PMU").
So for trace_imc, even though it is per thread PMU, it is preferred to
use sw_context in order to be able to do application level monitoring.
Hence change the task_ctx_nr to use perf_sw_context.
Fixes: 012ae24484 ("powerpc/perf: Trace imc PMU functions")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Update subject & incorporate notes into change log, reflow comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220202041837.65968-1-atrajeev@linux.vnet.ibm.com
Without this patch, module init sections are disabled by patching their
names in arch-specific code when they're loaded (which prevents code in
layout_sections from finding init sections). This patch uses the new
arch-specific module_init_section instead.
This allows modules that have .init_array sections to have the
initialisers properly called (on load, before init). Without this patch,
the initialisers are not called because .init_array is renamed to
_init_array, and thus isn't found by code in find_module_sections().
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220202055123.2144842-1-wedsonaf@google.com
Other uses of &gang->aff_list_head, eg in spufs_assert_affinity, indicate
that the list elements have type spu_context, not spu as used here. Change
the type of tmp accordingly.
This has no impact on the execution, because tmp is not used in the body of
the loop.
Fixes: c5fc8d2a92 ("[CELL] cell: add placement computation for scheduling of affinity contexts")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1588929176-28527-1-git-send-email-Julia.Lawall@inria.fr
When figuring out the number of threads, the debug message prints "1
thread" for the first iteration of the loop, instead of the actual
number of threads calculated from the length of the
"ibm,ppc-interrupt-server#s" property.
* /cpus/PowerPC,POWER8@20...
ibm,ppc-interrupt-server#s -> 1 threads <--- WRONG
thread 0 -> cpu 0 (hard id 32)
thread 1 -> cpu 1 (hard id 33)
thread 2 -> cpu 2 (hard id 34)
thread 3 -> cpu 3 (hard id 35)
thread 4 -> cpu 4 (hard id 36)
thread 5 -> cpu 5 (hard id 37)
thread 6 -> cpu 6 (hard id 38)
thread 7 -> cpu 7 (hard id 39)
* /cpus/PowerPC,POWER8@28...
ibm,ppc-interrupt-server#s -> 8 threads
thread 0 -> cpu 8 (hard id 40)
thread 1 -> cpu 9 (hard id 41)
thread 2 -> cpu 10 (hard id 42)
thread 3 -> cpu 11 (hard id 43)
thread 4 -> cpu 12 (hard id 44)
thread 5 -> cpu 13 (hard id 45)
thread 6 -> cpu 14 (hard id 46)
thread 7 -> cpu 15 (hard id 47)
(...)
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210120181847.952106-1-farosas@linux.ibm.com
We increment the reference count for KVM-HV/PR before the call to
kvmppc_core_init_vm. If that function fails we need to decrement the
refcount.
Also remove the check on kvm_ops->owner because try_module_get can
handle a NULL module.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220125155735.1018683-5-farosas@linux.ibm.com
The module's exit function is not called when the init fails, we need
to do cleanup before returning.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220125155735.1018683-4-farosas@linux.ibm.com
Delay the setting of kvm_hv_ops until after all init code has
completed. This avoids leaving the ops still accessible if the init
fails.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220125155735.1018683-3-farosas@linux.ibm.com
The return of the function is being shadowed by the call to
kvmppc_uvmem_init.
Fixes: ca9f494267 ("KVM: PPC: Book3S HV: Support for running secure guests")
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220125155735.1018683-2-farosas@linux.ibm.com
As reported by sparse:
arch/powerpc/mm/ptdump/hashpagetable.c:264:29: warning: restricted __be64 degrades to integer
arch/powerpc/mm/ptdump/hashpagetable.c:265:49: warning: restricted __be64 degrades to integer
arch/powerpc/mm/ptdump/hashpagetable.c:267:36: warning: incorrect type in assignment (different base types)
arch/powerpc/mm/ptdump/hashpagetable.c:267:36: expected unsigned long long [usertype]
arch/powerpc/mm/ptdump/hashpagetable.c:267:36: got restricted __be64 [usertype] v
arch/powerpc/mm/ptdump/hashpagetable.c:268:36: warning: incorrect type in assignment (different base types)
arch/powerpc/mm/ptdump/hashpagetable.c:268:36: expected unsigned long long [usertype]
arch/powerpc/mm/ptdump/hashpagetable.c:268:36: got restricted __be64 [usertype] r
The values returned by plpar_pte_read_4() are CPU endian, not __be64, so
assigning them to struct hash_pte confuses sparse. As a minimal fix open
code a struct to hold the values with CPU endian types.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220202053039.691917-1-mpe@ellerman.id.au
Mahesh & Sourabh identified two problems[1][2] with ppc64_bolted_size()
and paca allocation.
The first is that on a Radix capable machine but with "disable_radix" on
the command line, there is a window during early boot where
early_radix_enabled() is true, even though it will later become false.
early_init_devtree: <- early_radix_enabled() = false
early_init_dt_scan_cpus: <- early_radix_enabled() = false
...
check_cpu_pa_features: <- early_radix_enabled() = false
... ^ <- early_radix_enabled() = TRUE
allocate_paca: | <- early_radix_enabled() = TRUE
... |
ppc64_bolted_size: | <- early_radix_enabled() = TRUE
if (early_radix_enabled())| <- early_radix_enabled() = TRUE
return ULONG_MAX; |
... |
... | <- early_radix_enabled() = TRUE
... | <- early_radix_enabled() = TRUE
mmu_early_init_devtree() V
... <- early_radix_enabled() = false
This causes ppc64_bolted_size() to return ULONG_MAX for the boot CPU's
paca allocation, even though later it will return a different value.
This is not currently a bug because the paca allocation is also limited
by the RMA size, but that is very fragile.
The second issue is that when using the Hash MMU, when we call
ppc64_bolted_size() for the boot CPU's paca allocation, we have not yet
detected whether 1T segments are available. That causes
ppc64_bolted_size() to return 256MB, even if the machine can actually
support up to 1T. This is usually OK, we generally have space below
256MB for one paca, but for a kdump kernel placed above 256MB it causes
the boot to fail.
At boot we cannot discover all the features of the machine
instantaneously, so there will always be some periods where we have
incomplete knowledge of the system. However both the above problems stem
from the fact that we allocate the boot CPU's paca (and paca pointers
array) before we decide which MMU we are using, or discover its exact
features.
Moving the paca allocation slightly later still can solve both the
issues described above, and means for a normal boot we don't do any
permanent allocations until after we've discovered the MMU.
Note that although we move the boot CPU's paca allocation later, we
still have a temporary paca (boot_paca) accessible via r13, so code that
does read only access to paca fields is safe. The only risk is that some
code writes to the boot_paca, and that write will then be lost when we
switch away from the boot_paca later in early_setup().
The additional code that runs before the paca allocation is primarily
mmu_early_init_devtree(), which is scanning the device tree and
populating globals and cur_cpu_spec with MMU related flags. I do not see
any additional code that writes to paca fields.
[1]: https://lore.kernel.org/r/20211018084434.217772-2-sourabhjain@linux.ibm.com
[2]: https://lore.kernel.org/r/20211018084434.217772-3-sourabhjain@linux.ibm.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220124130544.408675-1-mpe@ellerman.id.au
On board rev A, the network interface labels for the switch ports
written on the front panel are different than on rev B and later.
This patch fixes network interface names for the switch ports according
to labels that are written on the front panel of the board rev B.
They start from ETH3 and end at ETH10.
This patch also introduces a separate device tree for rev A.
The main device tree is supposed to cover rev B and later.
Fixes: e69eb0824d ("powerpc: dts: t1040rdb: add ports for Seville Ethernet switch")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220121091447.3412907-1-bigunclemax@gmail.com
The LPAR name may be changed after the LPAR has been started in the HMC.
In that case lparstat command is not reporting the updated value because
it reads it from the device tree which is read at boot time.
However this value could be read from RTAS.
Adding this value in the /proc/powerpc/lparcfg output allows to read the
updated value.
However the hypervisor, like Qemu/KVM, may not support this RTAS
parameter. In that case the value reported in lparcfg is read from the
device tree and so is not updated accordingly.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
[mpe: Drop doc-comment syntax, change RTAS/DT to lower case, use of_root
to fix missing of_node_put(), use of_property_read_string()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220106161339.74656-1-ldufour@linux.ibm.com
Static variables do not need to be initialised to 0, because compiler
will initialise all uninitialised statics to 0. Thus, remove the
unneeded initialization.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211220030243.603435-1-wangborong@cdjrlc.com
At the moment KVM on PPC creates 4 types of entries under the kvm debugfs:
1) "%pid-%fd" per a KVM instance (for all platforms);
2) "vm%pid" (for PPC Book3s HV KVM);
3) "vm%u_vcpu%u_timing" (for PPC Book3e KVM);
4) "kvm-xive-%p" (for XIVE PPC Book3s KVM, the same for XICS);
The problem with this is that multiple VMs per process is not allowed for
2) and 3) which makes it possible for userspace to trigger errors when
creating duplicated debugfs entries.
This merges all these into 1).
This defines kvm_arch_create_kvm_debugfs() similar to
kvm_arch_create_vcpu_debugfs().
This defines 2 hooks in kvmppc_ops that allow specific KVM implementations
add necessary entries, this adds the _e500 suffix to
kvmppc_create_vcpu_debugfs_e500() to make it clear what platform it is for.
This makes use of already existing kvm_arch_create_vcpu_debugfs() on PPC.
This removes no more used debugfs_dir pointers from PPC kvm_arch structs.
This stops removing vcpu entries as once created vcpus stay around
for the entire life of a VM and removed when the KVM instance is closed,
see commit d56f5136b0 ("KVM: let kvm_destroy_vm_debugfs clean up vCPU
debugfs directories").
Suggested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220111005404.162219-1-aik@ozlabs.ru
The unit-address for the Maxim MAX1237 ADCs on XPedite5200 boards don't
match the value in the "reg" property and cause a DTC warning.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211220134036.683309-1-thierry.reding@gmail.com
T1040RDB has two RTL8211E-VB phys which requires setting
of internal delays for correct work.
Changing the phy-connection-type property to `rgmii-id`
will fix this issue.
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211230151123.1258321-1-bigunclemax@gmail.com
This means an idle guest won't needlessly consume an entire core on
the host, waiting for work to show up.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220112112459.1033754-1-troglobit@gmail.com
The link stack flush status is not visible in debugfs. It can be enabled
even when count cache flush is disabled. Add separate file for its
status.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
[mpe: Update for change to link_stack_flush_type]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191127220959.6208-1-msuchanek@suse.de
Cédric pointed out that XIVE IPI information exported via sysfs
(debug/powerpc/xive) display empty lines for processors which are
not online.
Switch to using for_each_online_cpu() so that information is
displayed for online-only processors.
Reported-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Sachin Sant <sachinp@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/164146703333.19039.10920919226094771665.sendpatchset@MacBook-Pro.local
MMIO emulation can fail if the guest uses an instruction that we are
not prepared to emulate. Since these instructions can be and most
likely are valid ones, this is (slightly) closer to an access fault
than to an illegal instruction, so deliver a Data Storage interrupt
instead of a Program interrupt.
BookE ignores bad faults, so it will keep using a Program interrupt
because a DSI would cause a fault loop in the guest.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220125215655.1026224-6-farosas@linux.ibm.com
If MMIO emulation fails we don't want to crash the whole guest by
returning to userspace.
The original commit bbf45ba57e ("KVM: ppc: PowerPC 440 KVM
implementation") added a todo:
/* XXX Deliver Program interrupt to guest. */
and later the commit d69614a295 ("KVM: PPC: Separate loadstore
emulation from priv emulation") added the Program interrupt injection
but in another file, so I'm assuming it was missed that this block
needed to be altered.
Also change the message to a ratelimited one since we're letting the
guest run and it could flood the host logs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220125215655.1026224-5-farosas@linux.ibm.com
The MMIO interface between the kernel and userspace uses a structure
that supports a maximum of 8-bytes of data. Instructions that access
more than that need to be emulated in parts.
We currently don't have generic support for splitting the emulation in
parts and each set of instructions needs to be explicitly included.
There's already an error message being printed when a load or store
exceeds the mmio.data buffer but we don't fail the emulation until
later at kvmppc_complete_mmio_load and even then we allow userspace to
make a partial copy of the data, which ends up overwriting some fields
of the mmio structure.
This patch makes the emulation fail earlier at kvmppc_handle_load|store,
which will send a Program interrupt to the guest. This is better than
allowing the guest to proceed with partial data.
Note that this was caught in a somewhat artificial scenario using
quadword instructions (lq/stq), there's no account of an actual guest
in the wild running instructions that are not properly emulated.
(While here, remove the "bad MMIO" messages. The caller already has an
error message.)
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220125215655.1026224-4-farosas@linux.ibm.com
The MMIO emulation code for vector instructions is duplicated between
VSX and VMX. When emulating VMX we should check the VMX copy size
instead of the VSX one.
Fixes: acc9eb9305 ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction ...")
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220125215655.1026224-3-farosas@linux.ibm.com
Our kvm_arch_vcpu_ioctl_run currently returns the RESUME_HOST values
to userspace, against the API of the KVM_RUN ioctl which returns 0 on
success.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220125215655.1026224-2-farosas@linux.ibm.com
Some of them used to be used by libbfd for a.out coredump handling.
Seeing that
* libbfd has their copies anyway
* we don't export them into userland headers
* we don't support a.out coredumps anymore
let's bury the definitions. They never had in-kernel
users anyway...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The empty unmap_page_from_agp() macro causes a warning when
building with 'make W=1' on a couple of architectures:
drivers/char/agp/generic.c: In function 'agp_generic_destroy_page':
drivers/char/agp/generic.c:1265:28: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
1265 | unmap_page_from_agp(page);
Change the definitions to a 'do { } while (0)' construct to
make these more reliable.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Helge Deller <deller@gmx.de>
The decrementer exception can fail to be cleared when the interrupt
returns in the case where the decrementer wraps with the next timer
still beyond decrementer_max. This results in a decrementer interrupt
storm. This is triggerable with small decrementer system with hard
and soft watchdogs disabled.
Fix this by always programming the decrementer if there was no timer.
Fixes: 0faf20a1ad ("powerpc/64s/interrupt: Don't enable MSR[EE] in irq handlers unless perf is in use")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220124143930.3923442-1-npiggin@gmail.com
The L0 is storing HFSCR requested by the L1 for the L2 in struct
kvm_nested_guest when the L1 requests a vCPU enter L2. kvm_nested_guest
is not a per-vCPU structure. Hilarity ensues.
Fix it by moving the nested hfscr into the vCPU structure together with
the other per-vCPU nested fields.
Fixes: 8b210a880b ("KVM: PPC: Book3S HV Nested: Make nested HFSCR state accessible")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220122105530.3477250-1-npiggin@gmail.com
- A series of bpf fixes, including an oops fix and some codegen fixes.
- Fix a regression in syscall_get_arch() for compat processes.
- Fix boot failure on some 32-bit systems with KASAN enabled.
- A couple of other build/minor fixes.
Thanks to: Athira Rajeev, Christophe Leroy, Dmitry V. Levin, Jiri Olsa, Johan Almbladh,
Maxime Bizon, Naveen N. Rao, Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=KjWT
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A series of bpf fixes, including an oops fix and some codegen fixes.
- Fix a regression in syscall_get_arch() for compat processes.
- Fix boot failure on some 32-bit systems with KASAN enabled.
- A couple of other build/minor fixes.
Thanks to Athira Rajeev, Christophe Leroy, Dmitry V. Levin, Jiri Olsa,
Johan Almbladh, Maxime Bizon, Naveen N. Rao, and Nicholas Piggin.
* tag 'powerpc-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Mask SRR0 before checking against the masked NIP
powerpc/perf: Only define power_pmu_wants_prompt_pmi() for CONFIG_PPC64
powerpc/32s: Fix kasan_init_region() for KASAN
powerpc/time: Fix build failure due to do_hard_irq_enable() on PPC32
powerpc/audit: Fix syscall_get_arch()
powerpc64/bpf: Limit 'ldbrx' to processors compliant with ISA v2.06
tools/bpf: Rename 'struct event' to avoid naming conflict
powerpc/bpf: Update ldimm64 instructions during extra pass
powerpc32/bpf: Fix codegen for bpf-to-bpf calls
bpf: Guard against accessing NULL pt_regs in bpf_get_task_stack()
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
Remove PDE_DATA() completely and replace it with pde_data().
[akpm@linux-foundation.org: fix naming clash in drivers/nubus/proc.c]
[akpm@linux-foundation.org: now fix it properly]
Link: https://lkml.kernel.org/r/20211124081956.87711-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
New driver:
- Sunplus SP7021 RTC
- Nintendo GameCube, Wii and Wii U RTC
Drivers:
- cmos: refactor UIP handling and presence check, fix century
- rs5c372: offset correction support, report low voltage
- rv8803: Epson RX8804 support
-----BEGIN PGP SIGNATURE-----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=nwD6
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Two new drivers this cycle and a significant rework of the CMOS driver
make the bulk of the changes.
I also carry powerpc changes with the agreement of Michael.
New drivers:
- Sunplus SP7021 RTC
- Nintendo GameCube, Wii and Wii U RTC
Driver updates:
- cmos: refactor UIP handling and presence check, fix century
- rs5c372: offset correction support, report low voltage
- rv8803: Epson RX8804 support"
* tag 'rtc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
rtc: sunplus: fix return value in sp_rtc_probe()
rtc: cmos: Evaluate century appropriate
rtc: gamecube: Fix an IS_ERR() vs NULL check
rtc: mc146818-lib: fix signedness bug in mc146818_get_time()
dt-bindings: rtc: qcom-pm8xxx-rtc: update register numbers
rtc: pxa: fix null pointer dereference
rtc: ftrtc010: Use platform_get_irq() to get the interrupt
rtc: Move variable into switch case statement
rtc: pcf2127: Fix typo in comment
dt-bindings: rtc: Add Sunplus RTC json-schema
rtc: Add driver for RTC in Sunplus SP7021
rtc: rs5c372: fix incorrect oscillation value on r2221tl
rtc: rs5c372: add offset correction support
rtc: cmos: avoid UIP when writing alarm time
rtc: cmos: avoid UIP when reading alarm time
rtc: mc146818-lib: refactor mc146818_does_rtc_work
rtc: mc146818-lib: refactor mc146818_get_time
rtc: mc146818-lib: extract mc146818_avoid_UIP
rtc: mc146818-lib: fix RTC presence check
rtc: Check return value from mc146818_get_time()
...
Current release - regressions:
- fix memory leaks in the skb free deferral scheme if upper layer
protocols are used, i.e. in-kernel TCP readers like TLS
Current release - new code bugs:
- nf_tables: fix NULL check typo in _clone() functions
- change the default to y for Vertexcom vendor Kconfig
- a couple of fixes to incorrect uses of ref tracking
- two fixes for constifying netdev->dev_addr
Previous releases - regressions:
- bpf:
- various verifier fixes mainly around register offset handling
when passed to helper functions
- fix mount source displayed for bpffs (none -> bpffs)
- bonding:
- fix extraction of ports for connection hash calculation
- fix bond_xmit_broadcast return value when some devices are down
- phy: marvell: add Marvell specific PHY loopback
- sch_api: don't skip qdisc attach on ingress, prevent ref leak
- htb: restore minimal packet size handling in rate control
- sfp: fix high power modules without diagnostic monitoring
- mscc: ocelot:
- don't let phylink re-enable TX PAUSE on the NPI port
- don't dereference NULL pointers with shared tc filters
- smsc95xx: correct reset handling for LAN9514
- cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
- phy: micrel: use kszphy_suspend/_resume for irq aware devices,
avoid races with the interrupt
Previous releases - always broken:
- xdp: check prog type before updating BPF link
- smc: resolve various races around abnormal connection termination
- sit: allow encapsulated IPv6 traffic to be delivered locally
- axienet: fix init/reset handling, add missing barriers,
read the right status words, stop queues correctly
- add missing dev_put() in sock_timestamping_bind_phc()
Misc:
- ipv4: prevent accidentally passing RTO_ONLINK to
ip_route_output_key_hash() by sanitizing flags
- ipv4: avoid quadratic behavior in netns dismantle
- stmmac: dwmac-oxnas: add support for OX810SE
- fsl: xgmac_mdio: add workaround for erratum A-009885
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XM4Y
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf.
Quite a handful of old regression fixes but most of those are
pre-5.16.
Current release - regressions:
- fix memory leaks in the skb free deferral scheme if upper layer
protocols are used, i.e. in-kernel TCP readers like TLS
Current release - new code bugs:
- nf_tables: fix NULL check typo in _clone() functions
- change the default to y for Vertexcom vendor Kconfig
- a couple of fixes to incorrect uses of ref tracking
- two fixes for constifying netdev->dev_addr
Previous releases - regressions:
- bpf:
- various verifier fixes mainly around register offset handling
when passed to helper functions
- fix mount source displayed for bpffs (none -> bpffs)
- bonding:
- fix extraction of ports for connection hash calculation
- fix bond_xmit_broadcast return value when some devices are down
- phy: marvell: add Marvell specific PHY loopback
- sch_api: don't skip qdisc attach on ingress, prevent ref leak
- htb: restore minimal packet size handling in rate control
- sfp: fix high power modules without diagnostic monitoring
- mscc: ocelot:
- don't let phylink re-enable TX PAUSE on the NPI port
- don't dereference NULL pointers with shared tc filters
- smsc95xx: correct reset handling for LAN9514
- cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
- phy: micrel: use kszphy_suspend/_resume for irq aware devices,
avoid races with the interrupt
Previous releases - always broken:
- xdp: check prog type before updating BPF link
- smc: resolve various races around abnormal connection termination
- sit: allow encapsulated IPv6 traffic to be delivered locally
- axienet: fix init/reset handling, add missing barriers, read the
right status words, stop queues correctly
- add missing dev_put() in sock_timestamping_bind_phc()
Misc:
- ipv4: prevent accidentally passing RTO_ONLINK to
ip_route_output_key_hash() by sanitizing flags
- ipv4: avoid quadratic behavior in netns dismantle
- stmmac: dwmac-oxnas: add support for OX810SE
- fsl: xgmac_mdio: add workaround for erratum A-009885"
* tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys
ipv4: avoid quadratic behavior in netns dismantle
net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
dt-bindings: net: Document fsl,erratum-a009885
net/fsl: xgmac_mdio: Add workaround for erratum A-009885
net: mscc: ocelot: fix using match before it is set
net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
net: axienet: increase default TX ring size to 128
net: axienet: fix for TX busy handling
net: axienet: fix number of TX ring slots for available check
net: axienet: Fix TX ring slot available check
net: axienet: limit minimum TX ring size
net: axienet: add missing memory barriers
net: axienet: reset core on initialization prior to MDIO access
net: axienet: Wait for PhyRstCmplt after core reset
net: axienet: increase reset timeout
bpf, selftests: Add ringbuf memory type confusion test
...
Merge more updates from Andrew Morton:
"55 patches.
Subsystems affected by this patch series: percpu, procfs, sysctl,
misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2,
hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits)
lib: remove redundant assignment to variable ret
ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
btrfs: use generic Kconfig option for 256kB page size limit
arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB
configs: introduce debug.config for CI-like setup
delayacct: track delays from memory compact
Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact
delayacct: cleanup flags in struct task_delay_info and functions use it
delayacct: fix incomplete disable operation when switch enable to disable
delayacct: support swapin delay accounting for swapping without blkio
panic: remove oops_id
panic: use error_report_end tracepoint on warnings
fs/adfs: remove unneeded variable make code cleaner
FAT: use io_schedule_timeout() instead of congestion_wait()
hfsplus: use struct_group_attr() for memcpy() region
nilfs2: remove redundant pointer sbufs
fs/binfmt_elf: use PT_LOAD p_align values for static PIE
const_structs.checkpatch: add frequently used ops structs
...
With NEED_PER_CPU_PAGE_FIRST_CHUNK enabled, we need a function to
populate pte, this patch adds a generic pcpu populate pte function,
pcpu_populate_pte(), which is marked __weak and used on most
architectures, but it is overridden on x86, which has its own
implementation.
Link: https://lkml.kernel.org/r/20211216112359.103822-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the previous patch, we could add a generic pcpu first chunk
allocate and free function to cleanup the duplicated definations on each
architecture.
Link: https://lkml.kernel.org/r/20211216112359.103822-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add pcpu_fc_cpu_to_node_fn_t and pass it into pcpu_fc_alloc_fn_t, pcpu
first chunk allocation will call it to alloc memblock on the
corresponding node by it, this is prepare for the next patch.
Link: https://lkml.kernel.org/r/20211216112359.103822-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: percpu: Cleanup percpu first chunk function".
When supporting page mapping percpu first chunk allocator on arm64, we
found there are lots of duplicated codes in percpu embed/page first chunk
allocator. This patchset is aimed to cleanup them and should no function
change.
The currently supported status about 'embed' and 'page' in Archs shows
below,
embed: NEED_PER_CPU_PAGE_FIRST_CHUNK
page: NEED_PER_CPU_EMBED_FIRST_CHUNK
embed page
------------------------
arm64 Y Y
mips Y N
powerpc Y Y
riscv Y N
sparc Y Y
x86 Y Y
------------------------
There are two interfaces about percpu first chunk allocator,
extern int __init pcpu_embed_first_chunk(size_t reserved_size, size_t dyn_size,
size_t atom_size,
pcpu_fc_cpu_distance_fn_t cpu_distance_fn,
- pcpu_fc_alloc_fn_t alloc_fn,
- pcpu_fc_free_fn_t free_fn);
+ pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn);
extern int __init pcpu_page_first_chunk(size_t reserved_size,
- pcpu_fc_alloc_fn_t alloc_fn,
- pcpu_fc_free_fn_t free_fn,
- pcpu_fc_populate_pte_fn_t populate_pte_fn);
+ pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn);
The pcpu_fc_alloc_fn_t/pcpu_fc_free_fn_t is killed, we provide generic
pcpu_fc_alloc() and pcpu_fc_free() function, which are called in the
pcpu_embed/page_first_chunk().
1) For pcpu_embed_first_chunk(), pcpu_fc_cpu_to_node_fn_t is needed to be
provided when archs supported NUMA.
2) For pcpu_page_first_chunk(), the pcpu_fc_populate_pte_fn_t is killed too,
a generic pcpu_populate_pte() which marked '__weak' is provided, if you
need a different function to populate pte on the arch(like x86), please
provide its own implementation.
[1] https://github.com/kevin78/linux.git percpu-cleanup
This patch (of 4):
The HAVE_SETUP_PER_CPU_AREA/NEED_PER_CPU_EMBED_FIRST_CHUNK/
NEED_PER_CPU_PAGE_FIRST_CHUNK/USE_PERCPU_NUMA_NODE_ID configs, which have
duplicate definitions on platforms that subscribe it.
Move them into mm, drop these redundant definitions and instead just
select it on applicable platforms.
Link: https://lkml.kernel.org/r/20211216112359.103822-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20211216112359.103822-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This block is used in (at least) T1024 and T1040, including their
variants like T1023 etc.
Fixes: d55ad2967d ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add new kconfig target 'make mod2noconfig', which will be useful to
speed up the build and test iteration.
- Raise the minimum supported version of LLVM to 11.0.0
- Refactor certs/Makefile
- Change the format of include/config/auto.conf to stop double-quoting
string type CONFIG options.
- Fix ARCH=sh builds in dash
- Separate compression macros for general purposes (cmd_bzip2 etc.) and
the ones for decompressors (cmd_bzip2_with_size etc.)
- Misc Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=8BQf
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new kconfig target 'make mod2noconfig', which will be useful to
speed up the build and test iteration.
- Raise the minimum supported version of LLVM to 11.0.0
- Refactor certs/Makefile
- Change the format of include/config/auto.conf to stop double-quoting
string type CONFIG options.
- Fix ARCH=sh builds in dash
- Separate compression macros for general purposes (cmd_bzip2 etc.) and
the ones for decompressors (cmd_bzip2_with_size etc.)
- Misc Makefile cleanups
* tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: add cmd_file_size
arch: decompressor: remove useless vmlinux.bin.all-y
kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}
kbuild: drop $(size_append) from cmd_zstd
sh: rename suffix-y to suffix_y
doc: kbuild: fix default in `imply` table
microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV}
certs: move scripts/extract-cert to certs/
kbuild: do not quote string values in include/config/auto.conf
kbuild: do not include include/config/auto.conf from shell scripts
certs: simplify $(srctree)/ handling and remove config_filename macro
kbuild: stop using config_filename in scripts/Makefile.modsign
certs: remove misleading comments about GCC PR
certs: refactor file cleaning
certs: remove unneeded -I$(srctree) option for system_certificates.o
certs: unify duplicated cmd_extract_certs and improve the log
certs: use $< and $@ to simplify the key generation rule
kbuild: remove headers_check stub
kbuild: move headers_check.pl to usr/include/
certs: use if_changed to re-generate the key when the key type is changed
...
Commit 314f6c23dd ("powerpc/64s: Mask NIP before checking against
SRR0") masked off the low 2 bits of the NIP value in the interrupt
stack frame in case they are non-zero and mis-compare against a SRR0
register value of a CPU which always reads back 0 from the 2 low bits
which are reserved.
This now causes the opposite problem that an implementation which does
implement those bits in SRR0 will mis-compare against the masked NIP
value in which they have been cleared. QEMU is one such implementation,
and this is allowed by the architecture.
This can be triggered by sigfuz by setting low bits of PT_NIP in the
signal context.
Fix this for now by masking the SRR0 bits as well. Cleaner is probably
to sanitise these values before putting them in registers or stack, but
this is the quick and backportable fix.
Fixes: 314f6c23dd ("powerpc/64s: Mask NIP before checking against SRR0")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220117134403.2995059-1-npiggin@gmail.com
power_pmu_wants_prompt_pmi() is used to decide if PMIs should be taken
promptly. This is valid only for ppc64 and is used only if
CONFIG_PPC_BOOK3S_64=y. Hence include the function under config check
for PPC64.
Fixes warning for 32-bit compilation:
arch/powerpc/perf/core-book3s.c:2455:6: warning: no previous prototype for 'power_pmu_wants_prompt_pmi'
2455 | bool power_pmu_wants_prompt_pmi(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 5a7745b96f ("powerpc/64s/perf: add power_pmu_wants_prompt_pmi to say whether perf wants PMIs to be soft-NMI")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Move inside existing CONFIG_PPC64 ifdef block]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220114031355.87480-1-atrajeev@linux.vnet.ibm.com
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.orghttps://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.orghttps://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHhxvsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPZkAf+Nz92UL/5nNGcdHtE4m7AToMmitE9
bYkesf9BMQvAe5wjkABLuoHGi6ay4jabo4fiGzbdkiK7lO5YgfsWiMB3/MT5fl4E
jRPzaVQabp3YZLM8UYCBmfUVuRj524S967SfSRe0AvYjDEH8y7klPf4+7sCsFT0/
Px9Vf2KGuOlf0eM78yKg4rGaF0jS22eLgXm6FfNMY8/e29ZAo/jyUmqBY+Z2xxZG
aWhceDtSheW1jwLHLj3nOlQJvHTn8LVGXBE/R8Gda3ZjrBV2rKaDi4Fh+HD+dz86
2zVXwzQ7uck2CMW73GMoXMTWoKSHMyvlBOs1BdvBm4UsnGcXR+q8IFCeuQ==
=s73m
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"RISCV:
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into KVM's
'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to a
simpler state and less shared data between EL1 and EL2 in the nVHE
case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be unmapped
from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once the vcpu
xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen
emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency
checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits)
x86/fpu: Fix inline prefix warnings
selftest: kvm: Add amx selftest
selftest: kvm: Move struct kvm_x86_state to header
selftest: kvm: Reorder vcpu_load_state steps for AMX
kvm: x86: Disable interception for IA32_XFD on demand
x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
kvm: selftests: Add support for KVM_CAP_XSAVE2
kvm: x86: Add support for getting/setting expanded xstate buffer
x86/fpu: Add uabi_size to guest_fpu
kvm: x86: Add CPUID support for Intel AMX
kvm: x86: Add XCR0 support for Intel AMX
kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
kvm: x86: Emulate IA32_XFD_ERR for guest
kvm: x86: Intercept #NM for saving IA32_XFD_ERR
x86/fpu: Prepare xfd_err in struct fpu_guest
kvm: x86: Add emulation for IA32_XFD
x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
x86/fpu: Add guest support to xfd_enable_feature()
...
It has been reported some configuration where the kernel doesn't
boot with KASAN enabled.
This is due to wrong BAT allocation for the KASAN area:
---[ Data Block Address Translation ]---
0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw m
1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw m
2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw m
3: 0xf8000000-0xf9ffffff 0x2a000000 32M Kernel rw m
4: 0xfa000000-0xfdffffff 0x2c000000 64M Kernel rw m
A BAT must have both virtual and physical addresses alignment matching
the size of the BAT. This is not the case for BAT 4 above.
Fix kasan_init_region() by using block_size() function that is in
book3s32/mmu.c. To be able to reuse it here, make it non static and
change its name to bat_block_size() in order to avoid name conflict
with block_size() defined in <linux/blkdev.h>
Also reuse find_free_bat() to avoid an error message from setbat()
when no BAT is available.
And allocate memory outside of linear memory mapping to avoid
wasting that precious space.
With this change we get correct alignment for BATs and KASAN shadow
memory is allocated outside the linear memory space.
---[ Data Block Address Translation ]---
0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw
1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw
2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw
3: 0xf8000000-0xfbffffff 0x7c000000 64M Kernel rw
4: 0xfc000000-0xfdffffff 0x7a000000 32M Kernel rw
Fixes: 7974c47326 ("powerpc/32s: Implement dedicated kasan_init_region()")
Cc: stable@vger.kernel.org
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7a50ef902494d1325227d47d33dada01e52e5518.1641818726.git.christophe.leroy@csgroup.eu
Merge misc updates from Andrew Morton:
"146 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
mm/damon: hide kernel pointer from tracepoint event
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
mm/damon/dbgfs: remove an unnecessary variable
mm/damon: move the implementation of damon_insert_region to damon.h
mm/damon: add access checking for hugetlb pages
Docs/admin-guide/mm/damon/usage: update for schemes statistics
mm/damon/dbgfs: support all DAMOS stats
Docs/admin-guide/mm/damon/reclaim: document statistics parameters
mm/damon/reclaim: provide reclamation statistics
mm/damon/schemes: account how many times quota limit has exceeded
mm/damon/schemes: account scheme actions that successfully applied
mm/damon: remove a mistakenly added comment for a future feature
Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
Docs/admin-guide/mm/damon/usage: remove redundant information
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
mm/damon: convert macro functions to static inline functions
mm/damon: modify damon_rand() macro to static inline function
mm/damon: move damon_rand() definition into damon.h
...
find_first{,_zero}_bit is a more effective analogue of 'next' version if
start == 0. This patch replaces 'next' with 'first' where things look
trivial.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
find_bit API and bitmap API are closely related, but inclusion paths
are different - include/asm-generic and include/linux, correspondingly.
In the past it made a lot of troubles due to circular dependencies
and/or undefined symbols. Fix this by moving find.h under include/linux.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Since commit 4064b98270 ("mm: allow VM_FAULT_RETRY for multiple
times") allowed VM_FAULT_RETRY for multiple times, the
FAULT_FLAG_ALLOW_RETRY bit of fault_flag will not be changed in the page
fault path, so the following check is no longer needed:
flags & FAULT_FLAG_ALLOW_RETRY
So just remove it.
[akpm@linux-foundation.org: coding style fixes]
Link: https://lkml.kernel.org/r/20211110123358.36511-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Peter Xu <peterx@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 770cec16cd ("powerpc/audit: Simplify syscall_get_arch()")
and commit 898a1ef06a ("powerpc/audit: Avoid unneccessary #ifdef
in syscall_get_arguments()")
replaced test_tsk_thread_flag(task, TIF_32BIT)) by is_32bit_task().
But is_32bit_task() applies on current task while be want the test
done on task 'task'
So add a new macro is_tsk_32bit_task() to check any task.
Fixes: 770cec16cd ("powerpc/audit: Simplify syscall_get_arch()")
Fixes: 898a1ef06a ("powerpc/audit: Avoid unneccessary #ifdef in syscall_get_arguments()")
Cc: stable@vger.kernel.org
Reported-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c55cddb8f65713bf5859ed675d75a50cb37d5995.1642159570.git.christophe.leroy@csgroup.eu
Johan reported the below crash with test_bpf on ppc64 e5500:
test_bpf: #296 ALU_END_FROM_LE 64: 0x0123456789abcdef -> 0x67452301 jited:1
Oops: Exception in kernel mode, sig: 4 [#1]
BE PAGE_SIZE=4K SMP NR_CPUS=24 QEMU e500
Modules linked in: test_bpf(+)
CPU: 0 PID: 76 Comm: insmod Not tainted 5.14.0-03771-g98c2059e008a-dirty #1
NIP: 8000000000061c3c LR: 80000000006dea64 CTR: 8000000000061c18
REGS: c0000000032d3420 TRAP: 0700 Not tainted (5.14.0-03771-g98c2059e008a-dirty)
MSR: 0000000080089000 <EE,ME> CR: 88002822 XER: 20000000 IRQMASK: 0
<...>
NIP [8000000000061c3c] 0x8000000000061c3c
LR [80000000006dea64] .__run_one+0x104/0x17c [test_bpf]
Call Trace:
.__run_one+0x60/0x17c [test_bpf] (unreliable)
.test_bpf_init+0x6a8/0xdc8 [test_bpf]
.do_one_initcall+0x6c/0x28c
.do_init_module+0x68/0x28c
.load_module+0x2460/0x2abc
.__do_sys_init_module+0x120/0x18c
.system_call_exception+0x110/0x1b8
system_call_common+0xf0/0x210
--- interrupt: c00 at 0x101d0acc
<...>
---[ end trace 47b2bf19090bb3d0 ]---
Illegal instruction
The illegal instruction turned out to be 'ldbrx' emitted for
BPF_FROM_[L|B]E, which was only introduced in ISA v2.06. Guard use of
the same and implement an alternative approach for older processors.
Fixes: 156d0e290e ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d1e51c6fdf572062cf3009a751c3406bda01b832.1641468127.git.naveen.n.rao@linux.vnet.ibm.com
Pad instructions emitted for BPF_CALL so that the number of instructions
generated does not change for different function addresses. This is
especially important for calls to other bpf functions, whose address
will only be known during extra pass.
Fixes: 51c66ad849 ("powerpc/bpf: Implement extended BPF on PPC32")
Cc: stable@vger.kernel.org # v5.13+
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/52d8fe51f7620a6f27f377791564d79d75463576.1641468127.git.naveen.n.rao@linux.vnet.ibm.com
- Optimise radix KVM guest entry/exit by 2x on Power9/Power10.
- Allow firmware to tell us whether to disable the entry and uaccess flushes on Power10
or later CPUs.
- Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits.
- Several fixes and improvements to our hard lockup watchdog.
- Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit.
- Allow building the 64-bit Book3S kernel without hash MMU support, ie. Radix only.
- Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit).
- Add new encodings for perf_mem_data_src.mem_hops field, and use them on Power10.
- A series of small performance improvements to 64-bit interrupt entry.
- Several commits fixing issues when building with the clang integrated assembler.
- Many other small features and fixes.
Thanks to: Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell, Arnd Bergmann,
Athira Rajeev, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christoph Hellwig,
Daniel Axtens, David Yang, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren,
Hari Bathini, Jason Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent
Dufour, Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh Kamboju,
Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child, Oliver O'Halloran, Peiwei
Hu, Randy Dunlap, Ravi Bangoria, Rob Herring, Russell Currey, Sachin Sant, Sean
Christopherson, Segher Boessenkool, Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang
wangx, Yang Guang.
-----BEGIN PGP SIGNATURE-----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=BxhQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Optimise radix KVM guest entry/exit by 2x on Power9/Power10.
- Allow firmware to tell us whether to disable the entry and uaccess
flushes on Power10 or later CPUs.
- Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits.
- Several fixes and improvements to our hard lockup watchdog.
- Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit.
- Allow building the 64-bit Book3S kernel without hash MMU support, ie.
Radix only.
- Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit).
- Add new encodings for perf_mem_data_src.mem_hops field, and use them
on Power10.
- A series of small performance improvements to 64-bit interrupt entry.
- Several commits fixing issues when building with the clang integrated
assembler.
- Many other small features and fixes.
Thanks to Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell,
Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Daniel Axtens, David Yang, Erhard
Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren, Hari Bathini, Jason
Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour,
Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh
Kamboju, Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child,
Oliver O'Halloran, Peiwei Hu, Randy Dunlap, Ravi Bangoria, Rob Herring,
Russell Currey, Sachin Sant, Sean Christopherson, Segher Boessenkool,
Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang wangx, and Yang
Guang.
* tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (240 commits)
powerpc/xmon: Dump XIVE information for online-only processors.
powerpc/opal: use default_groups in kobj_type
powerpc/cacheinfo: use default_groups in kobj_type
powerpc/sched: Remove unused TASK_SIZE_OF
powerpc/xive: Add missing null check after calling kmalloc
powerpc/floppy: Remove usage of the deprecated "pci-dma-compat.h" API
selftests/powerpc: Add a test of sigreturning to an unaligned address
powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug warnings
powerpc/64s: Mask NIP before checking against SRR0
powerpc/perf: Fix spelling of "its"
powerpc/32: Fix boot failure with GCC latent entropy plugin
powerpc/code-patching: Replace patch_instruction() by ppc_inst_write() in selftests
powerpc/code-patching: Move code patching selftests in its own file
powerpc/code-patching: Move instr_is_branch_{i/b}form() in code-patching.h
powerpc/code-patching: Move patch_exception() outside code-patching.c
powerpc/code-patching: Use test_trampoline for prefixed patch test
powerpc/code-patching: Fix patch_branch() return on out-of-range failure
powerpc/code-patching: Reorganise do_patch_instruction() to ease error handling
powerpc/code-patching: Fix unmap_patch_area() error handling
powerpc/code-patching: Fix error handling in do_patch_instruction()
...
Treewide cleanup and consolidation of MSI interrupt handling in
preparation for further changes in this area which are necessary to:
- address existing shortcomings in the VFIO area
- support the upcoming Interrupt Message Store functionality which
decouples the message store from the PCI config/MMIO space
-----BEGIN PGP SIGNATURE-----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=vKzd
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq updates from Thomas Gleixner:
"Rework of the MSI interrupt infrastructure.
This is a treewide cleanup and consolidation of MSI interrupt handling
in preparation for further changes in this area which are necessary
to:
- address existing shortcomings in the VFIO area
- support the upcoming Interrupt Message Store functionality which
decouples the message store from the PCI config/MMIO space"
* tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits)
genirq/msi: Populate sysfs entry only once
PCI/MSI: Unbreak pci_irq_get_affinity()
genirq/msi: Convert storage to xarray
genirq/msi: Simplify sysfs handling
genirq/msi: Add abuse prevention comment to msi header
genirq/msi: Mop up old interfaces
genirq/msi: Convert to new functions
genirq/msi: Make interrupt allocation less convoluted
platform-msi: Simplify platform device MSI code
platform-msi: Let core code handle MSI descriptors
bus: fsl-mc-msi: Simplify MSI descriptor handling
soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs()
soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation
NTB/msi: Convert to msi_on_each_desc()
PCI: hv: Rework MSI handling
powerpc/mpic_u3msi: Use msi_for_each-desc()
powerpc/fsl_msi: Use msi_for_each_desc()
powerpc/pasemi/msi: Convert to msi_on_each_dec()
powerpc/cell/axon_msi: Convert to msi_on_each_desc()
powerpc/4xx/hsta: Rework MSI handling
...
Bindings:
- DT schema conversions for Samsung clocks, RNG bindings, Qcom Command
DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl, Tegra I2C
and BPMP, pwm-vibrator, Arm DSU, and Cadence macb
- DT schema conversions for Broadcom platforms: interrupt controllers,
STB GPIO, STB waketimer, STB reset, iProc MDIO mux, iProc PCIe,
Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON, SYSTEMPORT, AMAC,
Northstar 2 PCIe PHY, GENET, moca PHY, GISB arbiter, and SATA
- Add binding schemas for Tegra210 EMC table, TI DC-DC converters,
- Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues
- More fixes due to 'unevaluatedProperties' enabling
- Data type fixes and clean-ups of binding examples found in preparation
to move to validating DTB files directly (instead of intermediate YAML
representation.
- Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus
- Add various new compatible strings
DT core:
- Silence a warning for overlapping reserved memory regions
- Reimplement unittest overlay tracking
- Fix stack frame size warning in unittest
- Clean-ups of early FDT scanning functions
- Fix handling of "linux,usable-memory-range" on EFI booted systems
- Add support for 'fail' status on CPU nodes
- Improve error message in of_phandle_iterator_next()
- kbuild: Disable duplicate unit-address warnings for disabled nodes
-----BEGIN PGP SIGNATURE-----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=2g8v
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- DT schema conversions for Samsung clocks, RNG bindings, Qcom
Command DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl,
Tegra I2C and BPMP, pwm-vibrator, Arm DSU, and Cadence macb
- DT schema conversions for Broadcom platforms: interrupt
controllers, STB GPIO, STB waketimer, STB reset, iProc MDIO mux,
iProc PCIe, Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON,
SYSTEMPORT, AMAC, Northstar 2 PCIe PHY, GENET, moca PHY, GISB
arbiter, and SATA
- Add binding schemas for Tegra210 EMC table, TI DC-DC converters,
- Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues
- More fixes due to 'unevaluatedProperties' enabling
- Data type fixes and clean-ups of binding examples found in
preparation to move to validating DTB files directly (instead of
intermediate YAML representation.
- Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus
- Add various new compatible strings
DT core:
- Silence a warning for overlapping reserved memory regions
- Reimplement unittest overlay tracking
- Fix stack frame size warning in unittest
- Clean-ups of early FDT scanning functions
- Fix handling of "linux,usable-memory-range" on EFI booted systems
- Add support for 'fail' status on CPU nodes
- Improve error message in of_phandle_iterator_next()
- kbuild: Disable duplicate unit-address warnings for disabled nodes"
* tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (114 commits)
dt-bindings: net: mdio: Drop resets/reset-names child properties
dt-bindings: clock: samsung: convert S5Pv210 to dtschema
dt-bindings: clock: samsung: convert Exynos5410 to dtschema
dt-bindings: clock: samsung: convert Exynos5260 to dtschema
dt-bindings: clock: samsung: extend Exynos7 bindings with UFS
dt-bindings: clock: samsung: convert Exynos7 to dtschema
dt-bindings: clock: samsung: convert Exynos5433 to dtschema
dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes
dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp'
dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in example
dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in example
dt-bindings: clock: imx5: Drop clock consumer node from example
dt-bindings: Drop required 'interrupt-parent'
dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance'
dt-bindings: net: wireless: mt76: Fix 8-bit property sizes
dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schema
dt-bindings: i2c: st,stm32-i2c: Make each example a separate entry
dt-bindings: net: stm32-dwmac: Make each example a separate entry
dt-bindings: net: Cleanup MDIO node schemas
...
"Lots of cleanups and preparation; highlights:
- futex: Cleanup and remove runtime futex_cmpxchg detection
- rtmutex: Some fixes for the PREEMPT_RT locking infrastructure
- kcsan: Share owner_on_cpu() between mutex,rtmutex and rwsem and
annotate the racy owner->on_cpu access *once*.
- atomic64: Dead-Code-Elemination"
-----BEGIN PGP SIGNATURE-----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=vrYy
-----END PGP SIGNATURE-----
Merge tag 'locking_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Borislav Petkov:
"Lots of cleanups and preparation. Highlights:
- futex: Cleanup and remove runtime futex_cmpxchg detection
- rtmutex: Some fixes for the PREEMPT_RT locking infrastructure
- kcsan: Share owner_on_cpu() between mutex,rtmutex and rwsem and
annotate the racy owner->on_cpu access *once*.
- atomic64: Dead-Code-Elemination"
[ Description above by Peter Zijlstra ]
* tag 'locking_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: atomic64: Remove unusable atomic ops
futex: Fix additional regressions
locking: Allow to include asm/spinlock_types.h from linux/spinlock_types_raw.h
x86/mm: Include spinlock_t definition in pgtable.
locking: Mark racy reads of owner->on_cpu
locking: Make owner_on_cpu() into <linux/sched.h>
lockdep/selftests: Adapt ww-tests for PREEMPT_RT
lockdep/selftests: Skip the softirq related tests on PREEMPT_RT
lockdep/selftests: Unbalanced migrate_disable() & rcu_read_lock().
lockdep/selftests: Avoid using local_lock_{acquire|release}().
lockdep: Remove softirq accounting on PREEMPT_RT.
locking/rtmutex: Add rt_mutex_lock_nest_lock() and rt_mutex_lock_killable().
locking/rtmutex: Squash self-deadlock check for ww_rt_mutex.
locking: Remove rt_rwlock_is_contended().
sched: Trigger warning if ->migration_disabled counter underflows.
futex: Fix sparc32/m68k/nds32 build regression
futex: Remove futex_cmpxchg detection
futex: Ensure futex_atomic_cmpxchg_inatomic() is present
kernel/locking: Use a pointer in ww_mutex_trylock().
Pull crypto updates from Herbert Xu:
"Algorithms:
- Drop alignment requirement for data in aesni
- Use synchronous seeding from the /dev/random in DRBG
- Reseed nopr DRBGs every 5 minutes from /dev/random
- Add KDF algorithms currently used by security/DH
- Fix lack of entropy on some AMD CPUs with jitter RNG
Drivers:
- Add support for the D1 variant in sun8i-ce
- Add SEV_INIT_EX support in ccp
- PFVF support for GEN4 host driver in qat
- Compression support for GEN4 devices in qat
- Add cn10k random number generator support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (145 commits)
crypto: af_alg - rewrite NULL pointer check
lib/mpi: Add the return value check of kcalloc()
crypto: qat - fix definition of ring reset results
crypto: hisilicon - cleanup warning in qm_get_qos_value()
crypto: kdf - select SHA-256 required for self-test
crypto: x86/aesni - don't require alignment of data
crypto: ccp - remove unneeded semicolon
crypto: stm32/crc32 - Fix kernel BUG triggered in probe()
crypto: s390/sha512 - Use macros instead of direct IV numbers
crypto: sparc/sha - remove duplicate hash init function
crypto: powerpc/sha - remove duplicate hash init function
crypto: mips/sha - remove duplicate hash init function
crypto: sha256 - remove duplicate generic hash init function
crypto: jitter - add oversampling of noise source
MAINTAINERS: update SEC2 driver maintainers list
crypto: ux500 - Use platform_get_irq() to get the interrupt
crypto: hisilicon/qm - disable qm clock-gating
crypto: omap-aes - Fix broken pm_runtime_and_get() usage
MAINTAINERS: update caam crypto driver maintainers list
crypto: octeontx2 - prevent underflow in get_cores_bmap()
...
Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible,
or at least perform the freeing outside of the socket lock section
to decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice
and net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported
in the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or
MSM8974 (qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch
driver with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of:
lan78xx, ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer granularity,
stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KLm3
-----END PGP SIGNATURE-----
Merge tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible, or at
least perform the freeing outside of the socket lock section to
decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice and
net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported in
the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
(qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of: lan78xx,
ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer
granularity, stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support"
* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
tcp: tcp_send_challenge_ack delete useless param `skb`
net/qla3xxx: Remove useless DMA-32 fallback configuration
rocker: Remove useless DMA-32 fallback configuration
hinic: Remove useless DMA-32 fallback configuration
lan743x: Remove useless DMA-32 fallback configuration
net: enetc: Remove useless DMA-32 fallback configuration
cxgb4vf: Remove useless DMA-32 fallback configuration
cxgb4: Remove useless DMA-32 fallback configuration
cxgb3: Remove useless DMA-32 fallback configuration
bnx2x: Remove useless DMA-32 fallback configuration
et131x: Remove useless DMA-32 fallback configuration
be2net: Remove useless DMA-32 fallback configuration
vmxnet3: Remove useless DMA-32 fallback configuration
bna: Simplify DMA setting
net: alteon: Simplify DMA setting
myri10ge: Simplify DMA setting
qlcnic: Simplify DMA setting
net: allwinner: Fix print format
page_pool: remove spinlock in page_pool_refill_alloc_cache()
amt: fix wrong return type of amt_send_membership_update()
...
accesing it in order to prevent any potential data races, and convert
all users to those new accessors
-----BEGIN PGP SIGNATURE-----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=v6Xn
-----END PGP SIGNATURE-----
Merge tag 'core_entry_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull thread_info flag accessor helper updates from Borislav Petkov:
"Add a set of thread_info.flags accessors which snapshot it before
accesing it in order to prevent any potential data races, and convert
all users to those new accessors"
* tag 'core_entry_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
powerpc: Snapshot thread flags
powerpc: Avoid discarding flags in system_call_exception()
openrisc: Snapshot thread flags
microblaze: Snapshot thread flags
arm64: Snapshot thread flags
ARM: Snapshot thread flags
alpha: Snapshot thread flags
sched: Snapshot thread flags
entry: Snapshot thread flags
x86: Snapshot thread flags
thread_info: Add helpers to snapshot thread flags
- KCSAN enabled for arm64.
- Additional kselftests to exercise the syscall ABI w.r.t. SVE/FPSIMD.
- Some more SVE clean-ups and refactoring in preparation for SME support
(scalable matrix extensions).
- BTI clean-ups (SYM_FUNC macros etc.)
- arm64 atomics clean-up and codegen improvements.
- HWCAPs for FEAT_AFP (alternate floating point behaviour) and
FEAT_RPRESS (increased precision of reciprocal estimate and reciprocal
square root estimate).
- Use SHA3 instructions to speed-up XOR.
- arm64 unwind code refactoring/unification.
- Avoid DC (data cache maintenance) instructions when DCZID_EL0.DZP == 1
(potentially set by a hypervisor; user-space already does this).
- Perf updates for arm64: support for CI-700, HiSilicon PCIe PMU,
Marvell CN10K LLC-TAD PMU, miscellaneous clean-ups.
- Other fixes and clean-ups; highlights: fix the handling of erratum
1418040, correct the calculation of the nomap region boundaries,
introduce io_stop_wc() mapped to the new DGH instruction (data
gathering hint).
-----BEGIN PGP SIGNATURE-----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=ecyi
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- KCSAN enabled for arm64.
- Additional kselftests to exercise the syscall ABI w.r.t. SVE/FPSIMD.
- Some more SVE clean-ups and refactoring in preparation for SME
support (scalable matrix extensions).
- BTI clean-ups (SYM_FUNC macros etc.)
- arm64 atomics clean-up and codegen improvements.
- HWCAPs for FEAT_AFP (alternate floating point behaviour) and
FEAT_RPRESS (increased precision of reciprocal estimate and
reciprocal square root estimate).
- Use SHA3 instructions to speed-up XOR.
- arm64 unwind code refactoring/unification.
- Avoid DC (data cache maintenance) instructions when DCZID_EL0.DZP ==
1 (potentially set by a hypervisor; user-space already does this).
- Perf updates for arm64: support for CI-700, HiSilicon PCIe PMU,
Marvell CN10K LLC-TAD PMU, miscellaneous clean-ups.
- Other fixes and clean-ups; highlights: fix the handling of erratum
1418040, correct the calculation of the nomap region boundaries,
introduce io_stop_wc() mapped to the new DGH instruction (data
gathering hint).
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
arm64: Use correct method to calculate nomap region boundaries
arm64: Drop outdated links in comments
arm64: perf: Don't register user access sysctl handler multiple times
drivers: perf: marvell_cn10k: fix an IS_ERR() vs NULL check
perf/smmuv3: Fix unused variable warning when CONFIG_OF=n
arm64: errata: Fix exec handling in erratum 1418040 workaround
arm64: Unhash early pointer print plus improve comment
asm-generic: introduce io_stop_wc() and add implementation for ARM64
arm64: Ensure that the 'bti' macro is defined where linkage.h is included
arm64: remove __dma_*_area() aliases
docs/arm64: delete a space from tagged-address-abi
arm64: Enable KCSAN
kselftest/arm64: Add pidbench for floating point syscall cases
arm64/fp: Add comments documenting the usage of state restore functions
kselftest/arm64: Add a test program to exercise the syscall ABI
kselftest/arm64: Allow signal tests to trigger from a function
kselftest/arm64: Parameterise ptrace vector length information
arm64/sve: Minor clarification of ABI documentation
arm64/sve: Generalise vector length configuration prctl() for SME
arm64/sve: Make sysctl interface for SVE reusable by SME
...
A few minor cleanups for cross-architecture code: Alexandre Ghiti
deals with removing some leftovers from drivers and features that
have been removed, and Wasin Thonkaew has a cosmetic change.
-----BEGIN PGP SIGNATURE-----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=ZaDF
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"A few minor cleanups for cross-architecture code: Alexandre Ghiti
deals with removing some leftovers from drivers and features that have
been removed, and Wasin Thonkaew has a cosmetic change"
* tag 'asm-generic-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic/error-injection.h: fix a spelling mistake, and a coding style issue
arch: Remove leftovers from prism54 wireless driver
arch: Remove leftovers from mandatory file locking
Documentation, arch: Remove leftovers from CIFS_WEAK_PW_HASH
Documentation, arch: Remove leftovers from raw device
The previous commit fixed up all shell scripts to not include
include/config/auto.conf.
Now that include/config/auto.conf is only included by Makefiles,
we can change it into a more Make-friendly form.
Previously, Kconfig output string values enclosed with double-quotes
(both in the .config and include/config/auto.conf):
CONFIG_X="foo bar"
Unlike shell, Make handles double-quotes (and single-quotes as well)
verbatim. We must rip them off when used.
There are some patterns:
[1] $(patsubst "%",%,$(CONFIG_X))
[2] $(CONFIG_X:"%"=%)
[3] $(subst ",,$(CONFIG_X))
[4] $(shell echo $(CONFIG_X))
These are not only ugly, but also fragile.
[1] and [2] do not work if the value contains spaces, like
CONFIG_X=" foo bar "
[3] does not work correctly if the value contains double-quotes like
CONFIG_X="foo\"bar"
[4] seems to work better, but has a cost of forking a process.
Anyway, quoted strings were always PITA for our Makefiles.
This commit changes Kconfig to stop quoting in include/config/auto.conf.
These are the string type symbols referenced in Makefiles or scripts:
ACPI_CUSTOM_DSDT_FILE
ARC_BUILTIN_DTB_NAME
ARC_TUNE_MCPU
BUILTIN_DTB_SOURCE
CC_IMPLICIT_FALLTHROUGH
CC_VERSION_TEXT
CFG80211_EXTRA_REGDB_KEYDIR
EXTRA_FIRMWARE
EXTRA_FIRMWARE_DIR
EXTRA_TARGETS
H8300_BUILTIN_DTB
INITRAMFS_SOURCE
LOCALVERSION
MODULE_SIG_HASH
MODULE_SIG_KEY
NDS32_BUILTIN_DTB
NIOS2_DTB_SOURCE
OPENRISC_BUILTIN_DTB
SOC_CANAAN_K210_DTB_SOURCE
SYSTEM_BLACKLIST_HASH_LIST
SYSTEM_REVOCATION_KEYS
SYSTEM_TRUSTED_KEYS
TARGET_CPU
UNUSED_KSYMS_WHITELIST
XILINX_MICROBLAZE0_FAMILY
XILINX_MICROBLAZE0_HW_VER
XTENSA_VARIANT_NAME
I checked them one by one, and fixed up the code where necessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
dxa command in XMON debugger iterates through all possible processors.
As a result, empty lines are printed even for processors which are not
online.
CPU 47:pp=00 CPPR=ff IPI=0x0040002f PQ=-- EQ idx=699 T=0 00000000 00000000
CPU 48:
CPU 49:
Restrict XIVE information(dxa) to be displayed for online processors only.
Signed-off-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/164139226833.12930.272224382183014664.sendpatchset@MacBook-Pro.local
