Commit Graph

1059206 Commits

Author SHA1 Message Date
Lai Jiangshan
777ab82d7c KVM: X86: Raise #GP when clearing CR0_PG in 64 bit mode
In the SDM:
If the logical processor is in 64-bit mode or if CR4.PCIDE = 1, an
attempt to clear CR0.PG causes a general-protection exception (#GP).
Software should transition to compatibility mode and clear CR4.PCIDE
before attempting to disable paging.

Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211207095230.53437-1-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-10 09:38:01 -05:00
Paolo Bonzini
c8cc43c1ea selftests: KVM: avoid failures due to reserved HyperTransport region
AMD proceessors define an address range that is reserved by HyperTransport
and causes a failure if used for guest physical addresses.  Avoid
selftests failures by reserving those guest physical addresses; the
rules are:

- On parts with <40 bits, its fully hidden from software.

- Before Fam17h, it was always 12G just below 1T, even if there was more
RAM above this location.  In this case we just not use any RAM above 1T.

- On Fam17h and later, it is variable based on SME, and is either just
below 2^48 (no encryption) or 2^43 (encryption).

Fixes: ef4c9f4f65 ("KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210805105423.412878-1-pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-10 07:42:20 -05:00
Sean Christopherson
3244867af8 KVM: x86: Ignore sparse banks size for an "all CPUs", non-sparse IPI req
Do not bail early if there are no bits set in the sparse banks for a
non-sparse, a.k.a. "all CPUs", IPI request.  Per the Hyper-V spec, it is
legal to have a variable length of '0', e.g. VP_SET's BankContents in
this case, if the request can be serviced without the extra info.

  It is possible that for a given invocation of a hypercall that does
  accept variable sized input headers that all the header input fits
  entirely within the fixed size header. In such cases the variable sized
  input header is zero-sized and the corresponding bits in the hypercall
  input should be set to zero.

Bailing early results in KVM failing to send IPIs to all CPUs as expected
by the guest.

Fixes: 214ff83d44 ("KVM: x86: hyperv: implement PV IPI send hypercalls")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211207220926.718794-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-10 07:12:42 -05:00
Vitaly Kuznetsov
1ebfaa11eb KVM: x86: Wait for IPIs to be delivered when handling Hyper-V TLB flush hypercall
Prior to commit 0baedd7927 ("KVM: x86: make Hyper-V PV TLB flush use
tlb_flush_guest()"), kvm_hv_flush_tlb() was using 'KVM_REQ_TLB_FLUSH |
KVM_REQUEST_NO_WAKEUP' when making a request to flush TLBs on other vCPUs
and KVM_REQ_TLB_FLUSH is/was defined as:

 (0 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)

so KVM_REQUEST_WAIT was lost. Hyper-V TLFS, however, requires that
"This call guarantees that by the time control returns back to the
caller, the observable effects of all flushes on the specified virtual
processors have occurred." and without KVM_REQUEST_WAIT there's a small
chance that the vCPU making the TLB flush will resume running before
all IPIs get delivered to other vCPUs and a stale mapping can get read
there.

Fix the issue by adding KVM_REQUEST_WAIT flag to KVM_REQ_TLB_FLUSH_GUEST:
kvm_hv_flush_tlb() is the sole caller which uses it for
kvm_make_all_cpus_request()/kvm_make_vcpus_request_mask() where
KVM_REQUEST_WAIT makes a difference.

Cc: stable@kernel.org
Fixes: 0baedd7927 ("KVM: x86: make Hyper-V PV TLB flush use tlb_flush_guest()")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211209102937.584397-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-10 07:12:41 -05:00
Maciej S. Szmigiero
ee3a4f6662 KVM: x86: selftests: svm_int_ctl_test: fix intercept calculation
INTERCEPT_x are bit positions, but the code was using the raw value of
INTERCEPT_VINTR (4) instead of BIT(INTERCEPT_VINTR).
This resulted in masking of bit 2 - that is, SMI instead of VINTR.

Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <49b9571d25588870db5380b0be1a41df4bbaaf93.1638486479.git.maciej.szmigiero@oracle.com>
2021-12-09 12:44:39 -05:00
Vitaly Kuznetsov
250552b925 KVM: nVMX: Don't use Enlightened MSR Bitmap for L3
When KVM runs as a nested hypervisor on top of Hyper-V it uses Enlightened
VMCS and enables Enlightened MSR Bitmap feature for its L1s and L2s (which
are actually L2s and L3s from Hyper-V's perspective). When MSR bitmap is
updated, KVM has to reset HV_VMX_ENLIGHTENED_CLEAN_FIELD_MSR_BITMAP from
clean fields to make Hyper-V aware of the change. For KVM's L1s, this is
done in vmx_disable_intercept_for_msr()/vmx_enable_intercept_for_msr().
MSR bitmap for L2 is build in nested_vmx_prepare_msr_bitmap() by blending
MSR bitmap for L1 and L1's idea of MSR bitmap for L2. KVM, however, doesn't
check if the resulting bitmap is different and never cleans
HV_VMX_ENLIGHTENED_CLEAN_FIELD_MSR_BITMAP in eVMCS02. This is incorrect and
may result in Hyper-V missing the update.

The issue could've been solved by calling evmcs_touch_msr_bitmap() for
eVMCS02 from nested_vmx_prepare_msr_bitmap() unconditionally but doing so
would not give any performance benefits (compared to not using Enlightened
MSR Bitmap at all). 3-level nesting is also not a very common setup
nowadays.

Don't enable 'Enlightened MSR Bitmap' feature for KVM's L2s (real L3s) for
now.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211129094704.326635-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-08 04:53:13 -05:00
Linus Torvalds
0fcfb00b28 Linux 5.16-rc4 2021-12-05 14:08:22 -08:00
Linus Torvalds
268ba09537 parisc architecture bug and warning fixes for kernel v5.16-rc4
Some bug and warning fixes:
 - Fix "make install" to use debians "installkernel" script which is now in /usr/sbin
 - Fix the bindeb-pkg make target by giving the correct KBUILD_IMAGE file name
 - Fix compiler warnings by annotating parisc agp init functions with __init
 - Fix timekeeping on SMP machines with dual-core CPUs
 - Enable some more config options in the 64-bit defconfig
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYa0fHwAKCRD3ErUQojoP
 X4auAQDw7wtS4zDGMmEnsLhqkWCPcqnZY0WANi7gCGN7iuJqIQD/ZfqhcBksfbO1
 OyrOpcQ6QYZuiADRPPzmPsnTw0t6YwQ=
 =kzK0
 -----END PGP SIGNATURE-----

Merge tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc fixes from Helge Deller:
 "Some bug and warning fixes:

   - Fix "make install" to use debians "installkernel" script which is
     now in /usr/sbin

   - Fix the bindeb-pkg make target by giving the correct KBUILD_IMAGE
     file name

   - Fix compiler warnings by annotating parisc agp init functions with
     __init

   - Fix timekeeping on SMP machines with dual-core CPUs

   - Enable some more config options in the 64-bit defconfig"

* tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Mark cr16 CPU clocksource unstable on all SMP machines
  parisc: Fix "make install" on newer debian releases
  parisc/agp: Annotate parisc agp init functions with __init
  parisc: Enable sata sil, audit and usb support on 64-bit defconfig
  parisc: Fix KBUILD_IMAGE for self-extracting kernel
2021-12-05 12:58:18 -08:00
Linus Torvalds
944207047c USB fixes for 5.16-rc4
Here are some small USB fixes for a few reported issues.  Included in
 here are:
 	- xhci fix for a _much_ reported regression.  I don't think
 	  there's a community distro that has not reported this problem
 	  yet :(
 	- new USB quirk addition
 	- cdns3 minor fixes
 	- typec regression fix.
 
 All of these have been in linux-next with no reported problems, and the
 xhci fix has been reported by many to resolve their reported problem.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYaynow8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yky3wCfVah+gTu/zrBSmBF7yFsqki9E+DQAnAxPbsFl
 GXlgsBQYKU+gMwe12amB
 =rXvx
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for a few reported issues. Included in
  here are:

   - xhci fix for a _much_ reported regression. I don't think there's a
     community distro that has not reported this problem yet :(

   - new USB quirk addition

   - cdns3 minor fixes

   - typec regression fix.

  All of these have been in linux-next with no reported problems, and
  the xhci fix has been reported by many to resolve their reported
  problem"

* tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()
  usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
  usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect
  USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
  xhci: Fix commad ring abort, write all 64 bits to CRCR register.
2021-12-05 09:34:57 -08:00
Linus Torvalds
5163953950 TTY/Serial fixes for 5.16-rc4
Here are some small TTY and Serial driver fixes for 5.16-rc4 to resolve
 a number of reported problems.
 
 They include:
 	- liteuart serial driver fixes
 	- 8250_pci serial driver fixes for pericom devices
 	- 8250 RTS line control fix while in RS-485 mode
 	- tegra serial driver fix
 	- msm_serial driver fix
 	- pl011 serial driver new id
 	- fsl_lpuart revert of broken change
 	- 8250_bcm7271 serial driver fix
 	- MAINTAINERS file update for rpmsg tty driver that came in
 	  5.16-rc1
 	- vgacon fix for reported problem
 
 All of these, except for the 8250_bcm7271 fix have been in linux-next
 with no reported problem.  The 8250_bcm7271 fix was added to the tree on
 Friday so no chance to be linux-next yet.  But it should be fine as the
 affected developers submitted it.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYayo2Q8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yno+wCguxkicXNPay+HXlDcImmCAXLhc/cAn34AwHP4
 +Lgvooz39wYxzl5D/Qhc
 =tw0u
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are some small TTY and Serial driver fixes for 5.16-rc4 to
  resolve a number of reported problems.

  They include:

   - liteuart serial driver fixes

   - 8250_pci serial driver fixes for pericom devices

   - 8250 RTS line control fix while in RS-485 mode

   - tegra serial driver fix

   - msm_serial driver fix

   - pl011 serial driver new id

   - fsl_lpuart revert of broken change

   - 8250_bcm7271 serial driver fix

   - MAINTAINERS file update for rpmsg tty driver that came in 5.16-rc1

   - vgacon fix for reported problem

  All of these, except for the 8250_bcm7271 fix have been in linux-next
  with no reported problem. The 8250_bcm7271 fix was added to the tree
  on Friday so no chance to be linux-next yet. But it should be fine as
  the affected developers submitted it"

* tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_bcm7271: UART errors after resuming from S2
  serial: 8250_pci: rewrite pericom_do_set_divisor()
  serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array
  serial: 8250: Fix RTS modem control while in rs485 mode
  Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP"
  serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30
  serial: liteuart: relax compile-test dependencies
  serial: liteuart: fix minor-number leak on probe errors
  serial: liteuart: fix use-after-free and memleak on unbind
  serial: liteuart: Fix NULL pointer dereference in ->remove()
  vgacon: Propagate console boot parameters before calling `vc_resize'
  tty: serial: msm_serial: Deactivate RX DMA for polling support
  serial: pl011: Add ACPI SBSA UART match id
  serial: core: fix transmit-buffer reset and memleak
  MAINTAINERS: Add rpmsg tty driver maintainer
2021-12-05 09:13:20 -08:00
Linus Torvalds
7587a4a5a4 - Prevent a tick storm when a dedicated timekeeper CPU in nohz_full
mode runs for prolonged periods with interrupts disabled and ends up
 programming the next tick in the past, leading to that storm
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmGsp+EACgkQEsHwGGHe
 VUpmAA/6A8W0Nb6Doc8B3emuy9qv3NeqLGWqSIKcJnOz0GYhlWuFKGmH6zWQ/ZKZ
 ihjw5fP7aOEytLhLagnn1k2weRZrgBavHaxQskuL3HBFD0mT6Gz1TfJC9JlE5s2Q
 KxaDjRLx5RGJb/KHZDiZv6Kz61Ouh14KfHHymVhZndcPNZ7UjsCgacyUkctGKcoc
 DtNW0Z6tjUGbp1MXyGcOiTiM7hUS8SWsdJbMfn0Eu+/NKvnkua7vwTgEMTwYwrK0
 88sLYyVygL+NHjE9LpSGrRj1HjEV4dSMC3r18UYuWQYkzBvA+/SQbIKD5QoeFmZU
 st5dMBD8Q3KvAWQ8mXE5ymaYaIZxv21PaL1J7lZ3J3osMASH0LkMWXLYoMVtO5rq
 OIpZlODSGLiamGcC5uieoBR/f4Zzn+sEZZ6TyoXWOBv4Cap2XnlJP5WjJ4ARJvzT
 MLX2u8MPPMTL7vtd2Xb4kPZcWH5irrCENXlbz0UG08ZHj4CvBFb+a87f+E4aNUs4
 uBsTf/kS5SihE1ripSCJEnFsc/QgVPr/9jBXQehRcuI4NgT4pUg85LWDj3gSIcH8
 wMRbiX2ND0ZWk89RYaoiDQ6JPGrsnwKvGLRk9ZhFNtUfpycv5JWKwepVbmAKfos+
 JtmG/6kcFQKBofR7EA4Xuh7DHv7LKCRf3MMlAR6Gzx/3K2kyIoQ=
 =Ft9k
 -----END PGP SIGNATURE-----

Merge tag 'timers_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer fix from Borislav Petkov:

 - Prevent a tick storm when a dedicated timekeeper CPU in nohz_full
   mode runs for prolonged periods with interrupts disabled and ends up
   programming the next tick in the past, leading to that storm

* tag 'timers_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers/nohz: Last resort update jiffies on nohz_full IRQ entry
2021-12-05 08:58:52 -08:00
Linus Torvalds
1d213767dc - Properly init uclamp_flags of a runqueue, on first enqueuing
- Fix preempt= callback return values
 
 - Correct utime/stime resource usage reporting on nohz_full to return
 the proper times instead of shorter ones
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmGspTcACgkQEsHwGGHe
 VUqHhBAAhEd9DMoJwREKDCDMqc3pttNYpTpSVo1K6oBTsOh7mwEilPdlmsTl239V
 jRocVJST+/JmJ424j7t0Sp42tREMKNlbyf+ddvr0oUwi0mLUnN6J83NU4WK4Jisf
 gyXFIkeMR+/W6/LO7gDdq/+rlRDtJcllwHoOm1yyiy5Zc0qDrcy6CjgP5/9hEsh6
 xvRvPOXbeZZVA+a+n+G9xGN836aBe1VptoABbdAlOSTiOvAVkS95UCb9rfPTvMtq
 /71jjZMmhTxGUhg5oLpgvfRRZE608X6b2RCTcAPKa5mfMpN5YMQLcD9G0f8XZjkq
 iOO/+arE6XQJlTzhAEsGxkSXaVweYxRHHP1yAlWYlWV/xGhoaAyq/tXE1KusAnng
 16/eTbrPb1eawpI6p1AAScCQuF/TlYZCMqjbFVhViXM5Rkd6jrii9vz/JnkdokGR
 3TH0n4WAJkdZeg18WS3B0eIt6zDTvxbR9g5ap2/10xYnYHMNdHXGH8A+5Grw9/Ln
 Qsv0V43OjdUK2tVuIHYblx1X9dOlLdpTEg9FCfjiZTQVor1pTwcbG62qNMozanlf
 lQqI6f63E0jugHqhrqrfBvl4lUuoajN5SvXfBNFDIzxwWBGSdr+hJQXstUatfSZZ
 MdmJX+Dk5cAk4CpQQ1ofPvYkS3Ade0vxaL4H++KHYtRvpPvxCXA=
 =XQFF
 -----END PGP SIGNATURE-----

Merge tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler fixes from Borislav Petkov:

 - Properly init uclamp_flags of a runqueue, on first enqueuing

 - Fix preempt= callback return values

 - Correct utime/stime resource usage reporting on nohz_full to return
   the proper times instead of shorter ones

* tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/uclamp: Fix rq->uclamp_max not set on first enqueue
  preempt/dynamic: Fix setup_preempt_mode() return value
  sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_full
2021-12-05 08:53:31 -08:00
Linus Torvalds
f5d54a42d3 - Fix a couple of SWAPGS fencing issues in the x86 entry code
- Use the proper operand types in __{get,put}_user() to prevent
 truncation in SEV-ES string io
 
 - Make sure the kernel mappings are present in trampoline_pgd in order
 to prevent any potential accesses to unmapped memory after switching to
 it
 
 - Fix a trivial list corruption in objtool's pv_ops validation
 
 - Disable the clocksource watchdog for TSC on platforms which claim
 that the TSC is constant, doesn't stop in sleep states, CPU has TSC
 adjust and the number of sockets of the platform are max 2, to prevent
 erroneous markings of the TSC as unstable.
 
 - Make sure TSC adjust is always checked not only when going idle
 
 - Prevent a stack leak by initializing struct _fpx_sw_bytes properly in
 the FPU code
 
 - Fix INTEL_FAM6_RAPTORLAKE define naming to adhere to the convention
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmGsnWcACgkQEsHwGGHe
 VUoR+g/9FcOP0/XLH+LKHumYc9JHXsp5BvYGihyypMFgU0fXQBORtGqdls8jZtiJ
 kEdbW6iL0MRlyN8aHJCqr7dJqs7KJlpWes6hky7BY+U+7uewtjL5y3eSyZnA34T3
 M/Raecx27Hh0L0kHQlHXTUN73v1cgDvq3dCXWsP7Jqgjf5cEmCcV/tPEateqhq/f
 8TkLVIm55rJlbJ0LBO/cT0V3Q8QH9JPKm7nviOZuKCh9gcttFEPaM9MkaJyKUhoy
 O13jlenDoVkVWRXIQec1EZp2pTLxVAm/3Y0plge1yEVsejzh07gsQnMpoNeF+yFC
 8mDgSv8ZAED/vbsnB+BcgoRVj6ajG0+ilpLzcfPwUquiqS9pZrBSTddlvYDPjRMC
 MEXO548xiYgxmipu3r62H89nqmLEYQPk914rJu6bDnDeJ1gaabh8RXbNtQcRqqj3
 RETgVOp78iWn+aT33RLLD1EyodZb2IkMy087a3+TZICIXG81aDj9VgHvrVRnWnfY
 yKuldyrEKzi60yMQkV6h1oc8KSWQhspUSLtOVS9zrulCinYphFOfYFrzFmcKUWIq
 GdVb9eaP2oNBGfPybXP+TBLGZ4Zv9iXZmaEUk7ZGCjgv3ZmGMWJ18Hs/ufs2cwWK
 RNNUo3sz/y3OsreHowkWIk1eSxI16MabB7G/PDMnBSHlioVT390=
 =d6nS
 -----END PGP SIGNATURE-----

Merge tag 'x86_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - Fix a couple of SWAPGS fencing issues in the x86 entry code

 - Use the proper operand types in __{get,put}_user() to prevent
   truncation in SEV-ES string io

 - Make sure the kernel mappings are present in trampoline_pgd in order
   to prevent any potential accesses to unmapped memory after switching
   to it

 - Fix a trivial list corruption in objtool's pv_ops validation

 - Disable the clocksource watchdog for TSC on platforms which claim
   that the TSC is constant, doesn't stop in sleep states, CPU has TSC
   adjust and the number of sockets of the platform are max 2, to
   prevent erroneous markings of the TSC as unstable.

 - Make sure TSC adjust is always checked not only when going idle

 - Prevent a stack leak by initializing struct _fpx_sw_bytes properly in
   the FPU code

 - Fix INTEL_FAM6_RAPTORLAKE define naming to adhere to the convention

* tag 'x86_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/xen: Add xenpv_restore_regs_and_return_to_usermode()
  x86/entry: Use the correct fence macro after swapgs in kernel CR3
  x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry()
  x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword
  x86/64/mm: Map all kernel memory into trampoline_pgd
  objtool: Fix pv_ops noinstr validation
  x86/tsc: Disable clocksource watchdog for TSC on qualified platorms
  x86/tsc: Add a timer to make sure TSC_adjust is always checked
  x86/fpu/signal: Initialize sw_bytes in save_xstate_epilog()
  x86/cpu: Drop spurious underscore from RAPTOR_LAKE #define
2021-12-05 08:43:35 -08:00
Linus Torvalds
90bf8d98b4 * Static analysis fix
* New SEV-ES protocol for communicating invalid VMGEXIT requests
 * Ensure APICv is considered inactive if there is no APIC
 * Fix reserved bits for AMD PerfEvtSeln register
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGscuAUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroOnzAgAg/0tifAOC8F31xu+gbbFa2hJsfH1
 sr2QXqVI6XUWeAHw5GEEcSFHGcFc0BrmfPEL4T3tEhkTGcijL2uTK8dwgq3ue4yg
 5LzaZzh03AWi4x84rV3XNVHHatzF69tgbUG49rSlK2T6BkGWzh4gI5LZV7XqNqLh
 acW+92YcCGo/O9RAUYYakofX4bp0rsQaZornQiD/R5X6AlrtMUyhAYHH5Wnv69n+
 MHf4K9MzrtixXbTvkOXflN5yz6TkIGvCpCK+gmppeuJ3JyZshjn+y95XcDDZtB6o
 +4Ypap3SmIkjTg4VwS8lRwIFkkY31hxhW2ohRnorfP2Q5Ckcz2/kVcIEew==
 =uJMy
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull more kvm fixes from Paolo Bonzini:

 - Static analysis fix

 - New SEV-ES protocol for communicating invalid VMGEXIT requests

 - Ensure APICv is considered inactive if there is no APIC

 - Fix reserved bits for AMD PerfEvtSeln register

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure
  KVM: SEV: Fall back to vmalloc for SEV-ES scratch area if necessary
  KVM: SEV: Return appropriate error codes if SEV-ES scratch setup fails
  KVM: x86/mmu: Retry page fault if root is invalidated by memslot update
  KVM: VMX: Set failure code in prepare_vmcs02()
  KVM: ensure APICv is considered inactive if there is no APIC
  KVM: x86/pmu: Fix reserved bits for AMD PerfEvtSeln register
2021-12-05 08:25:33 -08:00
Tom Lendacky
ad5b353240 KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure
Currently, an SEV-ES guest is terminated if the validation of the VMGEXIT
exit code or exit parameters fails.

The VMGEXIT instruction can be issued from userspace, even though
userspace (likely) can't update the GHCB. To prevent userspace from being
able to kill the guest, return an error through the GHCB when validation
fails rather than terminating the guest. For cases where the GHCB can't be
updated (e.g. the GHCB can't be mapped, etc.), just return back to the
guest.

The new error codes are documented in the lasest update to the GHCB
specification.

Fixes: 291bd20d5d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <b57280b5562893e2616257ac9c2d4525a9aeeb42.1638471124.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-05 03:02:04 -05:00
Sean Christopherson
a655276a59 KVM: SEV: Fall back to vmalloc for SEV-ES scratch area if necessary
Use kvzalloc() to allocate KVM's buffer for SEV-ES's GHCB scratch area so
that KVM falls back to __vmalloc() if physically contiguous memory isn't
available.  The buffer is purely a KVM software construct, i.e. there's
no need for it to be physically contiguous.

Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109222350.2266045-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-05 03:02:03 -05:00
Sean Christopherson
75236f5f22 KVM: SEV: Return appropriate error codes if SEV-ES scratch setup fails
Return appropriate error codes if setting up the GHCB scratch area for an
SEV-ES guest fails.  In particular, returning -EINVAL instead of -ENOMEM
when allocating the kernel buffer could be confusing as userspace would
likely suspect a guest issue.

Fixes: 8f423a80d2 ("KVM: SVM: Support MMIO for an SEV-ES guest")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109222350.2266045-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-12-05 03:02:03 -05:00
Linus Torvalds
79a7216204 Fixes for 5.16-rc3:
- Remove an unnecessary (and backwards) rename flags check that
    duplicates a VFS level check.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAmGpA0UACgkQ+H93GTRK
 tOv+ig/9GqltxOVsaaUf3IZJ4K+MHZ6anMRc8FLkfYJmxL+edFH3YLTt7MRryH2e
 K/O7pHRtn0o4dgeoIlAgS0vPuGz2ygwy394xnBQjmsw88XFl8F4h3aU5COVqXYmy
 whsnqAtKmFsV+2vdn1f3HX7bDV1VwQfQ+MiYzYiva7K7zanVlsd7oUUvEEJKEOF4
 oVDblBf2eONYVn27v1T+ABgYZNN/Px/ZeQRcQJisKBHtGVesCYw07Xsip6IfKumP
 E3BccxlYeuPxkTlNKfSA1khmQBsxpyrZHVvsoGaY6AciphRVDdR+1gFILkCxTaJD
 1grDvF6XbRNeY5YliHkDTnlDOmru1l0gSYzwPL/bAhVmwQgIboZexAMcX5v67Xge
 jOvV9kVw4Tgw6BtDxv6Inet/PVxvXLjVT8paILmBZ+reTYKZC0IO6UUiuYOu4hBy
 rmlE3sWx5JyLOOKJXgj2kzkGVTE41rRgKRpMvVSz2GVNLTaxp8k3OodCueA+IYcq
 3NJn3vlXzoOp7Acg86PZ9UDRCXa4KiouRGLJ/HHws5iRZXdmaZys9TzUcCYZp2Rw
 ILVtpYN8CEJu7POdNgjTZmMe9Wmb2etSQpYt/Xoji855M5oFY2I+a5+4DgoqGvIh
 nRQPAEQJwh3rTHuhQOCqryHMtRj6DORxugbuwyGeIlAlzGL38K0=
 =RyMs
 -----END PGP SIGNATURE-----

Merge tag 'xfs-5.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs fix from Darrick Wong:
 "Remove an unnecessary (and backwards) rename flags check that
  duplicates a VFS level check"

* tag 'xfs-5.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: remove incorrect ASSERT in xfs_rename
2021-12-04 17:22:53 -08:00
Linus Torvalds
23b55d673d 3 SMB3 multichannel/fscache fixes and a DFS fix
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmGr0HsACgkQiiy9cAdy
 T1FXmgv+LxMKh3FtGdLyzeJ9OJeUP87WtHCn8Tek5b0BUYxBrC12lzdLuYl8+zQr
 O09RcJ8THZwWYKqTDlkaQg4NnNeMEVeouottGIEQPuBztLVWNmvXD6g5c1YPhYMI
 0AfeUbkCQ9Gb+zoAJtXTLMCkqYj/x+jVrgO56V12gjIfZCB1XRPhnhJOao2BRo88
 go35pSn8l3lv8dLeQxUCBZ73+z/R8Kwk/8NgkFPT/N7vQwuSK7Ax27h8pyV0m8Zx
 lziNBiVM0HRTB5WREJsMWVD8NRcm8e+Xf7bFjhR0FbT7U3cSy4kLOPTd9RDKxxkj
 sGI56r1OoRCQFrv456kz6SPLLYx2ecP9WzDp6ghOvGENJ3UYFoUcv0L9+aQL1gyy
 Gxn+bTng6TMHxjpzhRgS4pJg3TME2US4HQepsRrrNZ0FXM67Gt4pFwoxtA/ZLy4X
 WyuROJ1Xy46G7Yn0glTPWGJ3yDDud88etLdF3RbH+wWtB88WvBtIjyPQ0QCEOFpU
 0UMD4ow9
 =hChf
 -----END PGP SIGNATURE-----

Merge tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Three SMB3 multichannel/fscache fixes and a DFS fix.

  In testing multichannel reconnect scenarios recently various problems
  with the cifs.ko implementation of fscache were found (e.g. incorrect
  initialization of fscache cookies in some cases)"

* tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: avoid use of dstaddr as key for fscache client cookie
  cifs: add server conn_id to fscache client cookie
  cifs: wait for tcon resource_id before getting fscache super
  cifs: fix missed refcounting of ipc tcon
2021-12-04 13:43:52 -08:00
Helge Deller
afdb4a5b1d parisc: Mark cr16 CPU clocksource unstable on all SMP machines
In commit c8c3735997 ("parisc: Enhance detection of synchronous cr16
clocksources") I assumed that CPUs on the same physical core are syncronous.
While booting up the kernel on two different C8000 machines, one with a
dual-core PA8800 and one with a dual-core PA8900 CPU, this turned out to be
wrong. The symptom was that I saw a jump in the internal clocks printed to the
syslog and strange overall behaviour.  On machines which have 4 cores (2
dual-cores) the problem isn't visible, because the current logic already marked
the cr16 clocksource unstable in this case.

This patch now marks the cr16 interval timers unstable if we have more than one
CPU in the system, and it fixes this issue.

Fixes: c8c3735997 ("parisc: Enhance detection of synchronous cr16 clocksources")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.15+
2021-12-04 21:36:04 +01:00
Helge Deller
0f9fee4cde parisc: Fix "make install" on newer debian releases
On newer debian releases the debian-provided "installkernel" script is
installed in /usr/sbin. Fix the kernel install.sh script to look for the
script in this directory as well.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v3.13+
2021-12-04 21:36:04 +01:00
Linus Torvalds
bbef3c7a63 block-5.16-2021-12-03
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmGqefsQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpkuDEADL+y8mkJEW6wcvFQSYlHdXXXthVEGmZyWV
 OINHE4JO/ysU4P8PTnzOvmXuV2rKhcpV9KF9rdo0vqMLXxQFlyjbUkIf7RP0YUjT
 Hz8nmGUQLXCEAWHYvdh9tRV2lgSutkajsxw/mNzwWJiM7sEnQXHifa4sXsQNGpLp
 eclOe4ITe/J4Q5CnntlA8u0lM4Y16O5jHrCneoqJxy6v/Wx9JkKI+L+mEfJQCpVN
 YxtVjFrE9nznB2eWBtZYlHnRxxZaNzRzY38KygKqhw0MhjCgpR+0izBTewzJyJjv
 09k+blskSqBtd1+GatbU0dGevcmQPJ7h9ersXQl00RaQiKBcFH1If5I89U2hkw0F
 GzI/N8y/zZIjTuSdVWEbTJCArTo8FxJ3ASc327n2Q2GSItbp9mjJlshLXkK2B+gg
 O1U3ZPAOFEsQOW4GIP6f/nPQtu+tHqBFytgpBJ2fegzaSIU03K3crEOOifKOODYm
 tGA2yxLymY3ZSVThAWixr+6efQMqD+J6Dv4uUx6sRMtJ0fi7+P6l7YimjQw17z/J
 XmEkionAsn6cbVIyJaMhcFop2IED5n18ZgPT0wdU2vfkwrwQsSpk5Uh9FPMg62RA
 Fzymb6IHr3+AgR+ZxQACYz7NRrULj2rRxAKpqX1iu6aodeJR3WrJx/9Ci/76Xgfm
 HT+f1uH7ww==
 =QBwo
 -----END PGP SIGNATURE-----

Merge tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block

Pull block fix from Jens Axboe:
 "A single fix for repeated printk spam from loop"

* tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
  loop: Use pr_warn_once() for loop_control_remove() warning
2021-12-04 08:38:25 -08:00
Linus Torvalds
8b9a02280e io_uring-5.16-2021-12-03
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmGqehoQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpo+jD/4kPAd6kkKBnYWxBhnjZUuL5pio7G9wVM5a
 OFDwJ8gh4blp+eqSFf7RnsTiP2xSIjOykBtCSl35jiUql1KPc0SN/rE9I+mxuTfj
 k1nW+hTaFeQXUL3Pz8oP+vwfWhfCmgPPH5hrNd9n6vmNas1JH29ZOK5Z2AQU7OLl
 h1a6Kwm7Jqmi346ZSOfdr4xCMVzXrUpZeN2AFEID9/rvpznKiENoMdO8dsDypgjc
 bRLQIP3X10qSu1KglRJo1+zGFDB/xKOPZ4EdoD0xNFHhUJQpe1YE0wVCliheCmcq
 kLVCPBeqh5UTW+orBfqVEI2UQlhhaqLW1Yq1zRMm35aS8tMQIaTfWDdvCO+Iq2Le
 0VLEWCLohP17nRxlJETxxzOPfCw/vE/ZxygLD5TRgZGdNB1+A1PV4s565fhvFE8t
 yRMhj4hYAY2XTBs44erJHJqBabt2VXLNw4A69DpdlDex+65lyNqGDez6x3VEKfZl
 /4ohF3XCAeklZxegK/06EQdgwqx7bovSEnAIFZs4jrdcTqZmubWoIyLLFOG8jC68
 ey50VOYZJhET+vb0KUn+zK2shcHJu5qSGH73ARHJ6pJpRsdEAdLaigTCSOKpUayA
 Ml/jg2JIGIeUAsfsA5mhM6kTJ+ymc1fM7CQUkH1SSXB+qOUbsML4FKhkY7WL7vH2
 IJ3zGtTNLw==
 =Xy6S
 -----END PGP SIGNATURE-----

Merge tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block

Pull io_uring fix from Jens Axboe:
 "Just a single fix preventing repeated retries of task_work based io-wq
  thread creation, fixing a regression from when io-wq was made more (a
  bit too much) resilient against signals"

* tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
  io-wq: don't retry task_work creation failure on fatal conditions
2021-12-04 08:34:59 -08:00
Linus Torvalds
e3b8bb4547 SCSI fixes on 20211204
two patches, both in drivers.  One is a fix to FC recovery (lpfc) and
 the other is an enhancement to support the Intel Alder Motherboard
 with the UFS driver which comes under the -rc exception process for
 hardware enabling.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYat3yyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbwKAP9yj4Da
 52hzcLcbjT6Z0SurmLrGd4fTaAinSDueSGvh5wEA/QDugzP7CEnogk9S7cAfJLQf
 QO1HhyRn6Vx+0r57Cj0=
 =0aRn
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Two patches, both in drivers.

  One is a fix to FC recovery (lpfc) and the other is an enhancement to
  support the Intel Alder Motherboard with the UFS driver which comes
  under the -rc exception process for hardware enabling"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: ufs-pci: Add support for Intel ADL
  scsi: lpfc: Fix non-recovery of remote ports following an unsolicited LOGO
2021-12-04 08:28:42 -08:00
Linus Torvalds
5c623c3689 Fixes in gfs2:
* Since commit 486408d690 ("gfs2: Cancel remote delete work
   asynchronously"), inode create and lookup-by-number can overlap more
   easily and we can end up with temporary duplicate inodes.  Fix the
   code to prevent that.
 * Fix a BUG demoting weak glock holders from a remote node.
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEJZs3krPW0xkhLMTc1b+f6wMTZToFAmGrPtYUHGFncnVlbmJh
 QHJlZGhhdC5jb20ACgkQ1b+f6wMTZTrtgA/+MESXTK8h/HK+M+CAnsJ5jFSVXV8W
 wmhhOtqikNGGruxnTJdkipe9PcPRsdwh4XLtmbfGairXnmFqJ+oEG8oRk/Tqoap8
 9RxWN+B+Wzh79mNvI3Il3RtvUJGNQGrfDSuT5F4jZ6eZSfjsyY3cgO2KMt2TN5sL
 7WXwYnj4VyPa8TdkSFIhfxwiXyal7aC8BVS6UX83CUIrhJvNG70A3hqVrIuKymUf
 dNiLWURdQ2oiDnX7hMjq/RnX84zAcp2B2wfKZVsX0ZcIqVdmHS5Er4PKqffEVOzq
 nf2SU4pAo4q7L7/66TdUtGoRgUSK74O83VTqsb1Lex5roON7unmVsjKyc7dmKUrR
 xt2Is4/OsCSZEsErWdMgtqer3fOxG1oGdSHzmgdRwqA22+Im5COTKjOBJ+3MXHaW
 E/36FGYYiugOLQn8hrqTqp3MIdPoZe8B/4ZF82qu6qYBQiA3PIHMlfElym5+45oR
 fqWLcwids4LV5esHK3YzZdQ3f9+FVIvcBayUUx71ZCD0QkNDUzTnckb5vTxwF3r1
 zU/jIsv84dvQiTsCMhTxQq+JDY98V544sapa+0k7chwtwpTdeajTHjocECGRKE1E
 o5vCWX6gAiJQ/5RtgfBS2DWXrBQNueUsYpBQM9jp2fr6kxK+Hc5MT8JMdZWw7Rb7
 1ZDw9PNs8TpByzc=
 =7HvB
 -----END PGP SIGNATURE-----

Merge tag 'gfs2-v5.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 fixes from Andreas Gruenbacher:

 - Since commit 486408d690 ("gfs2: Cancel remote delete work
   asynchronously"), inode create and lookup-by-number can overlap more
   easily and we can end up with temporary duplicate inodes. Fix the
   code to prevent that.

 - Fix a BUG demoting weak glock holders from a remote node.

* tag 'gfs2-v5.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: gfs2_create_inode rework
  gfs2: gfs2_inode_lookup rework
  gfs2: gfs2_inode_lookup cleanup
  gfs2: Fix remote demote of weak glock holders
2021-12-04 08:13:20 -08:00
Qais Yousef
315c4f8848 sched/uclamp: Fix rq->uclamp_max not set on first enqueue
Commit d81ae8aac8 ("sched/uclamp: Fix initialization of struct
uclamp_rq") introduced a bug where uclamp_max of the rq is not reset to
match the woken up task's uclamp_max when the rq is idle.

The code was relying on rq->uclamp_max initialized to zero, so on first
enqueue

	static inline void uclamp_rq_inc_id(struct rq *rq, struct task_struct *p,
					    enum uclamp_id clamp_id)
	{
		...

		if (uc_se->value > READ_ONCE(uc_rq->value))
			WRITE_ONCE(uc_rq->value, uc_se->value);
	}

was actually resetting it. But since commit d81ae8aac8 changed the
default to 1024, this no longer works. And since rq->uclamp_flags is
also initialized to 0, neither above code path nor uclamp_idle_reset()
update the rq->uclamp_max on first wake up from idle.

This is only visible from first wake up(s) until the first dequeue to
idle after enabling the static key. And it only matters if the
uclamp_max of this task is < 1024 since only then its uclamp_max will be
effectively ignored.

Fix it by properly initializing rq->uclamp_flags = UCLAMP_FLAG_IDLE to
ensure uclamp_idle_reset() is called which then will update the rq
uclamp_max value as expected.

Fixes: d81ae8aac8 ("sched/uclamp: Fix initialization of struct uclamp_rq")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20211202112033.1705279-1-qais.yousef@arm.com
2021-12-04 10:56:18 +01:00
Andrew Halaney
9ed20bafc8 preempt/dynamic: Fix setup_preempt_mode() return value
__setup() callbacks expect 1 for success and 0 for failure. Correct the
usage here to reflect that.

Fixes: 826bfeb37b ("preempt/dynamic: Support dynamic preempt with preempt= boot option")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211203233203.133581-1-ahalaney@redhat.com
2021-12-04 10:56:18 +01:00
Linus Torvalds
12119cfa10 VFIO fixes for v5.16-rc4
- Fix OpRegion pointer arithmetic (Zhenyu Wang)
 
  - Fix comment format triggering kernel-doc warnings (Randy Dunlap)
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmGqeUobHGFsZXgud2ls
 bGlhbXNvbkByZWRoYXQuY29tAAoJECObm247sIsiG2cQALLJZh/NIChZNRjX09ba
 1bSXI85vWAIXfDwxAMkMVYZDbeyGuAL4qN/DLS/nkgJN2/H4Uh+zGVC6Z8QhCBEI
 DFHtxVVleUs5sPQgLXrZy4XRiUh5v7DceQIBN5+UNZsKq3afbQ9r7V7DkZ0WXiA1
 NSiZOn+CafhEuDChlPTvTBcg6/Cw9r83I1+Rpf+vZtSUmsbyU/MSWtWe9/EYcmCE
 u5raDptULH18zVIImvuli9+dDuOlOPkgfqZnRLXYV2imPHFf2fwuSpvDFIhCDZ/M
 fwJUWE4JHHEceN4W7PnvXdqV8Gx3rsO7LaO5HQGQ7buMNqweO1zfr5Zw89mAnOQ5
 zJr5cmdNWaRPeXsdCFyD2j7R+PAschWr3k4Gl5u5caxWJOy0bEacCeKkboojP1br
 UZjEXApmvpBPWT5oSdhOMIZYyRwDSUsvpxczux3bcjieuRyzfvJckbHUGH82sEQ8
 832lLaGUo4DgdPwfimyQCL2usaRQkqJlcUxaeTWzwu+Z90xldjh73y77j3GQpKue
 AL+2anpTBQRDWU+N8Lh1uj/Pxfw/ni8LiMepT8b7FKPHRCPRvcvSSPIm7b/wKKlF
 weggu8YASn9w6bRWVxySEFmlTNPLhVUl9fA/m4GGgvEAN2j7Po8iyB9GHgwGZM2/
 WK0zcll93lEatdTLTG/PNfkB
 =3uUP
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v5.16-rc4' of git://github.com/awilliam/linux-vfio

Pull VFIO fixes from Alex Williamson:

 - Fix OpRegion pointer arithmetic (Zhenyu Wang)

 - Fix comment format triggering kernel-doc warnings (Randy Dunlap)

* tag 'vfio-v5.16-rc4' of git://github.com/awilliam/linux-vfio:
  vfio/pci: Fix OpRegion read
  vfio: remove all kernel-doc notation
2021-12-03 12:27:08 -08:00
Linus Torvalds
4ec6afd628 Power management fixes for 5.16-rc4
- Disable DTPM for this cycle to prevent it from causing issues
    to appear on otherwise functional systems (Daniel Lezcano).
 
  - Fix cpufreq sysfs interface failure related to physical CPU
    hot-add (Xiongfeng Wang).
 
  - Fix comment in cpufreq core and update its documentation (Tang
    Yizhou).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmGqUcISHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxQQ8P/i0mdHC9y7uNQ7nrDT4UfT8/Vq6OmgMd
 AZ4sjjzSXdcmpg+qvrqFTLYU4/R6ibKo1EkR9MsCdooGnIOkjFPwAIp0dnMRSQxC
 KJki47u9tbo1IaF2I3o5pTCYRL+KKIBFrI7ZgrfTMmtn9/VEBVdzaGFiesaPvrEy
 jbxeTncwlmELkKrZw+5hSZzB79rTVPYGXxLOyp/WfBf8DbiOzNmusfogrji50ogT
 EGUQdEuyfnA3cOtNTJGZPVObjfGJhxeyCQjjz5x0foXGThLBmz3gDIn+tNpS0kLi
 0hqWNMx9WWNPzmFgwpON49lJv42GmKzQi79QnvduIUFBZT9hXSJFsKqLreVlv39l
 VkBFKwojNUExiv31qzk0rLAhjbAvRrAQd8LxRKUGy3nwwbDAEtkMyUJAYnpC//mF
 g2dPKsCoWwPd9/g0iNPMCEEAwsAigDRX69V9SNpyFzHIbXExFrXi2IFlxJ68Pgzt
 edk2fuFqiILogPyLTqXqdgkLL6z7V1YYc6RD14WPp3s2W4ZvvOsNSGEanDMT63Hy
 YaZnIppeWy8TvRrcRZbla8rNXO4sy1QBe4QQ49n7Z24x+OScH6n0ts+brR6EMeM+
 JgD7xH3NMviHAYHhBpltNlXdKEa1Lc82y2w/Ti3bhweguURLEJjH5NkxFMDPxLQ6
 0gIrXDlmVrpd
 =mcYo
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix a CPU hot-add issue in the cpufreq core, fix a comment in
  the cpufreq core code and update its documentation, and disable the
  DTPM (Dynamic Thermal Power Management) code for the time being to
  prevent it from causing issues to appear.

  Specifics:

   - Disable DTPM for this cycle to prevent it from causing issues to
     appear on otherwise functional systems (Daniel Lezcano)

   - Fix cpufreq sysfs interface failure related to physical CPU hot-add
     (Xiongfeng Wang)

   - Fix comment in cpufreq core and update its documentation (Tang
     Yizhou)"

* tag 'pm-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  powercap: DTPM: Drop unused local variable from init_dtpm()
  cpufreq: docs: Update core.rst
  cpufreq: Fix a comment in cpufreq_policy_free
  powercap/drivers/dtpm: Disable DTPM at boot time
  cpufreq: Fix get_cpu_device() failure in add_cpu_dev_symlink()
2021-12-03 12:22:56 -08:00
Linus Torvalds
757f3e6ddd s390 updates for 5.16-rc4
- Fix potential overlap of pseudo-MMIO addresses with MIO addresses.
 
 - Fix stack unwinder test case inline assembly compile error that
   happens with LLVM's integrated assembler.
 
 - Update defconfigs.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmGqZq8ACgkQIg7DeRsp
 bsIHuQ/+PeeVR92LJg+b8oo9L8wTQy9w2GslKpU27AGXoj9PC6iGWIfp5v+tj+L7
 LCMykCQIS51JtdtMiymEpmITiSa0hhQ9Cft4qAa3UYjWNZDzYjA03H8emBnnMTlj
 DTBKcubLguxmSTx+MDGIIkUhpicGRky08AKcf8KjF4KkBFtwSr4vcA+I07ZEoE6p
 snoUbrt9CRuPowSkn4vLDARLbRpiom+5k/QA9MnfHXtocC5ivOYvGvS44PXgGO7/
 MCSML5T+4ngv0d9jWyDqJwnRch+BkJKwWTkyNhUethc5hUJxPw+Z0XPrKQCpAQFj
 9mSLbQgf6r32wiEc3NeDnqeqAAn/GJ6QweQkuElb9+kABw7XdNxIzv+uit8eD9/F
 +9sOH4UjbBs9aRMvMEb67ZlnLQ5yWRafYPSLDMyb2UEO6CW7ns+Ekhs39HowqsiB
 phNrgZBKCiXb34wwDedswo1Vt3l1ferTIVtBbKGeDFeD7Den/FSxppWfd+ZVEtZ4
 pFK1KmvbPhFZcoqJg4SRWETASP4tZuMXQTL5Rdnr0d/nLnAQuLf/QEevV32ZIgjN
 QXm6Yre+QFLAiThSLKqKcJ5eEraEDParjkcHvL523BEEuZv7a7c/Aji6pI2gpumn
 x+cM8Iq0ZzLBqDFZaVCtz0gcQ2ctUaFzjdTXvpSGEXw3K/iPovE=
 =+u2H
 -----END PGP SIGNATURE-----

Merge tag 's390-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fixes from Heiko Carstens:

 - Fix potential overlap of pseudo-MMIO addresses with MIO addresses

 - Fix stack unwinder test case inline assembly compile error that
   happens with LLVM's integrated assembler

 - Update defconfigs

* tag 's390-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: update defconfigs
  s390/pci: move pseudo-MMIO to prevent MIO overlap
  s390/test_unwind: use raw opcode instead of invalid instruction
2021-12-03 11:46:20 -08:00
Linus Torvalds
a2aeaeabbc arm64 fixes for -rc4
- Add missing BTI landing instructions to the ftrace*_caller trampolines
 
 - Fix kexec() WARN when DEBUG_VIRTUAL is enabled
 
 - Fix PAC documentation by removing stale references to compiler flags
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmGp/DwQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNBRNCACxT4pnnSuZssYZLdn+bVh9ahLqDwATfsYQ
 NZJEzPmaS2QoLZZ3a6ZwRUjnH7VAfsxHyq17m1SN8Hbx5mh3ZkWNbN4sEy8vlLz8
 m7NK0YKU12SMlP8Vmlgw9gzXgk4yQ/OnK2Jl50SQCGkT3MvCohx16X4lcY+M1oTq
 2+9Rwbpi05T0G7rIFQFPwWqbJyiCoJ0Xr/iVmo1IX74yVp0oT1SGTBADcIsCIHRO
 /xVlsHEsOQWtguZcwZE8UDVtBCgrZFnJh3P+EENlRBZ48ANsWCcQpGMf+wrsrG+l
 chIKU3oLFLe1JcNV1zG8D8RdwQA9r/MSzq0KZFJTw+CNvM11AqAg
 =JEy/
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "Three arm64 fixes for -rc4.

  One of them is just a trivial documentation fix, whereas the other two
  address a warning in the kexec code and a crash in ftrace on systems
  implementing BTI.

  The latter patch has a couple of ugly ifdefs which Mark plans to clean
  up separately, but as-is the patch is straightforward for backporting
  to stable kernels.

  Summary:

   - Add missing BTI landing instructions to the ftrace*_caller
     trampolines

   - Fix kexec() WARN when DEBUG_VIRTUAL is enabled

   - Fix PAC documentation by removing stale references to compiler
     flags"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: ftrace: add missing BTIs
  arm64: kexec: use __pa_symbol(empty_zero_page)
  arm64: update PAC description for kernel
2021-12-03 10:50:14 -08:00
Linus Torvalds
f66062c749 Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
 "I2C has another set of driver bugfixes, mostly for the stm32f7 driver"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: rk3x: Handle a spurious start completion interrupt flag
  i2c: stm32f7: use proper DMAENGINE API for termination
  i2c: stm32f7: stop dma transfer in case of NACK
  i2c: stm32f7: recover the bus on access timeout
  i2c: stm32f7: flush TX FIFO upon transfer errors
  i2c: cbus-gpio: set atomic transfer callback
2021-12-03 10:44:16 -08:00
Linus Torvalds
a44f27e451 libata fixes for 5.16-rc4
Two sparse warning fixes and a couple of patches to fix an issue with
 sata_fsl driver module removal:
 
 * A couple of patches to avoid sparse warnings in libata-sata and
   in the pata_falcon driver (from Yang and Finn).
 * A couple of sata_fsl driver patches fixing IRQ free and proc
   unregister on module removal (from Baokun).
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYanzwQAKCRDdoc3SxdoY
 dhBlAP92gjrDrWQrpmO/yIpA+wY5IdzbDldY/32f/aMMOu3exAEAxiD4vQhY9x39
 qRmZyIq74zWUP9NXdqkhlLL3YYI/uA4=
 =uwTI
 -----END PGP SIGNATURE-----

Merge tag 'libata-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull libata fixes from Damien Le Moal:
 "Two sparse warning fixes and a couple of patches to fix an issue with
  sata_fsl driver module removal:

   - A couple of patches to avoid sparse warnings in libata-sata and in
     the pata_falcon driver (from Yang and Finn).

   - A couple of sata_fsl driver patches fixing IRQ free and proc
     unregister on module removal (from Baokun)"

* tag 'libata-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: replace snprintf in show functions with sysfs_emit
  sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
  pata_falcon: Avoid type warnings from sparse
2021-12-03 10:38:45 -08:00
Shyam Prasad N
bbb9db5e2a cifs: avoid use of dstaddr as key for fscache client cookie
server->dstaddr can change when the DNS mapping for the
server hostname changes. But conn_id is a u64 counter
that is incremented each time a new TCP connection
is setup. So use only that as a key.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-12-03 12:38:25 -06:00
Shyam Prasad N
2adc82006b cifs: add server conn_id to fscache client cookie
The fscache client cookie uses the server address
(and port) as the cookie key. This is a problem when
nosharesock is used. Two different connections will
use duplicate cookies. Avoid this by adding
server->conn_id to the key, so that it's guaranteed
that cookie will not be duplicated.

Also, for secondary channels of a session, copy the
fscache pointer from the primary channel. The primary
channel is guaranteed not to go away as long as secondary
channels are in use.  Also addresses minor problem found
by kernel test robot.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-12-03 12:36:04 -06:00
Shyam Prasad N
5bf91ef03d cifs: wait for tcon resource_id before getting fscache super
The logic for initializing tcon->resource_id is done inside
cifs_root_iget. fscache super cookie relies on this for aux
data. So we need to push the fscache initialization to this
later point during mount.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-12-03 12:29:59 -06:00
Paulo Alcantara
65de262a20 cifs: fix missed refcounting of ipc tcon
Fix missed refcounting of IPC tcon used for getting domain-based DFS
root referrals.  We want to keep it alive as long as mount is active
and can be refreshed.  For standalone DFS root referrals it wouldn't
be a problem as the client ends up having an IPC tcon for both mount
and cache.

Fixes: c88f7dcd6d ("cifs: support nested dfs links over reconnect")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
2021-12-03 12:29:10 -06:00
Lai Jiangshan
5c8f6a2e31 x86/xen: Add xenpv_restore_regs_and_return_to_usermode()
In the native case, PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is the
trampoline stack. But XEN pv doesn't use trampoline stack, so
PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is also the kernel stack.

In that case, source and destination stacks are identical, which means
that reusing swapgs_restore_regs_and_return_to_usermode() in XEN pv
would cause %rsp to move up to the top of the kernel stack and leave the
IRET frame below %rsp.

This is dangerous as it can be corrupted if #NMI / #MC hit as either of
these events occurring in the middle of the stack pushing would clobber
data on the (original) stack.

And, with  XEN pv, swapgs_restore_regs_and_return_to_usermode() pushing
the IRET frame on to the original address is useless and error-prone
when there is any future attempt to modify the code.

 [ bp: Massage commit message. ]

Fixes: 7f2590a110 ("x86/entry/64: Use a per-CPU trampoline stack for IDT entries")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lkml.kernel.org/r/20211126101209.8613-4-jiangshanlai@gmail.com
2021-12-03 19:21:15 +01:00
Lai Jiangshan
1367afaa2e x86/entry: Use the correct fence macro after swapgs in kernel CR3
The commit

  c758907004 ("x86/entry/64: Remove unneeded kernel CR3 switching")

removed a CR3 write in the faulting path of load_gs_index().

But the path's FENCE_SWAPGS_USER_ENTRY has no fence operation if PTI is
enabled, see spectre_v1_select_mitigation().

Rather, it depended on the serializing CR3 write of SWITCH_TO_KERNEL_CR3
and since it got removed, add a FENCE_SWAPGS_KERNEL_ENTRY call to make
sure speculation is blocked.

 [ bp: Massage commit message and comment. ]

Fixes: c758907004 ("x86/entry/64: Remove unneeded kernel CR3 switching")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211126101209.8613-3-jiangshanlai@gmail.com
2021-12-03 19:13:53 +01:00
Linus Torvalds
054aa8d439 fget: check that the fd still exists after getting a ref to it
Jann Horn points out that there is another possible race wrt Unix domain
socket garbage collection, somewhat reminiscent of the one fixed in
commit cbcf01128d ("af_unix: fix garbage collect vs MSG_PEEK").

See the extended comment about the garbage collection requirements added
to unix_peek_fds() by that commit for details.

The race comes from how we can locklessly look up a file descriptor just
as it is in the process of being closed, and with the right artificial
timing (Jann added a few strategic 'mdelay(500)' calls to do that), the
Unix domain socket garbage collector could see the reference count
decrement of the close() happen before fget() took its reference to the
file and the file was attached onto a new file descriptor.

This is all (intentionally) correct on the 'struct file *' side, with
RCU lookups and lockless reference counting very much part of the
design.  Getting that reference count out of order isn't a problem per
se.

But the garbage collector can get confused by seeing this situation of
having seen a file not having any remaining external references and then
seeing it being attached to an fd.

In commit cbcf01128d ("af_unix: fix garbage collect vs MSG_PEEK") the
fix was to serialize the file descriptor install with the garbage
collector by taking and releasing the unix_gc_lock.

That's not really an option here, but since this all happens when we are
in the process of looking up a file descriptor, we can instead simply
just re-check that the file hasn't been closed in the meantime, and just
re-do the lookup if we raced with a concurrent close() of the same file
descriptor.

Reported-and-tested-by: Jann Horn <jannh@google.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-12-03 10:06:58 -08:00
Lai Jiangshan
c07e45553d x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry()
Commit

  18ec54fdd6 ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations")

added FENCE_SWAPGS_{KERNEL|USER}_ENTRY for conditional SWAPGS. In
paranoid_entry(), it uses only FENCE_SWAPGS_KERNEL_ENTRY for both
branches. This is because the fence is required for both cases since the
CR3 write is conditional even when PTI is enabled.

But

  96b2371413 ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")

changed the order of SWAPGS and the CR3 write. And it missed the needed
FENCE_SWAPGS_KERNEL_ENTRY for the user gsbase case.

Add it back by changing the branches so that FENCE_SWAPGS_KERNEL_ENTRY
can cover both branches.

  [ bp: Massage, fix typos, remove obsolete comment while at it. ]

Fixes: 96b2371413 ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211126101209.8613-2-jiangshanlai@gmail.com
2021-12-03 18:55:47 +01:00
Rafael J. Wysocki
404c912187 Merge branch 'powercap'
Merge DTPM fixes for 5.16-rc4.

* powercap:
  powercap: DTPM: Drop unused local variable from init_dtpm()
  powercap/drivers/dtpm: Disable DTPM at boot time
2021-12-03 18:09:32 +01:00
Michael Sterritt
1d5379d047 x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword
Properly type the operands being passed to __put_user()/__get_user().
Otherwise, these routines truncate data for dependent instructions
(e.g., INSW) and only read/write one byte.

This has been tested by sending a string with REP OUTSW to a port and
then reading it back in with REP INSW on the same port.

Previous behavior was to only send and receive the first char of the
size. For example, word operations for "abcd" would only read/write
"ac". With change, the full string is now written and read back.

Fixes: f980f9c31a (x86/sev-es: Compile early handler code into kernel image)
Signed-off-by: Michael Sterritt <sterritt@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20211119232757.176201-1-sterritt@google.com
2021-12-03 18:09:30 +01:00
Rafael J. Wysocki
1ac5e21d43 powercap: DTPM: Drop unused local variable from init_dtpm()
The dtpm_descr variable in init_dtpm() is not used after commit
f751db8ada ("powercap/drivers/dtpm: Disable DTPM at boot time"),
so drop it.

Fixes: f751db8ada ("powercap/drivers/dtpm: Disable DTPM at boot time")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-03 17:51:59 +01:00
Jens Axboe
a226abcd5d io-wq: don't retry task_work creation failure on fatal conditions
We don't want to be retrying task_work creation failure if there's
an actual signal pending for the parent task. If we do, then we can
enter an infinite loop of perpetually retrying and each retry failing
with -ERESTARTNOINTR because a signal is pending.

Fixes: 3146cba99a ("io-wq: make worker creation resilient against signals")
Reported-by: Florian Fischer <florian.fl.fischer@fau.de>
Link: https://lore.kernel.org/io-uring/20211202165606.mqryio4yzubl7ms5@pasture/
Tested-by: Florian Fischer <florian.fl.fischer@fau.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03 06:27:32 -07:00
Al Cooper
9cabe26e65 serial: 8250_bcm7271: UART errors after resuming from S2
There is a small window in time during resume where the hardware
flow control signal RTS can be asserted (which allows a sender to
resume sending data to the UART) but the baud rate has not yet
been restored. This will cause corrupted data and FRAMING, OVERRUN
and BREAK errors. This is happening because the MCTRL register is
shadowed in uart_port struct and is later used during resume to set
the MCTRL register during both serial8250_do_startup() and
uart_resume_port(). Unfortunately, serial8250_do_startup()
happens before the UART baud rate is restored. The fix is to clear
the shadowed mctrl value at the end of suspend and restore it at the
end of resume.

Fixes: 41a469482d ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Link: https://lore.kernel.org/r/20211201201402.47446-1-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 14:14:49 +01:00
Zhou Qingyang
37307f7020 usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()
In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring
and there is a dereference of it in cdnsp_endpoint_init(), which could
lead to a NULL pointer dereference on failure of cdnsp_ring_alloc().

Fix this bug by adding a check of pep->ring.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@vger.kernel.org>
Acked-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130172700.206650-1-zhou1615@umn.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 13:57:45 +01:00
Frank Li
387c2b6ba1 usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
This issue was found at android12 MTP.
1. MTP submit many out urb request.
2. Cancel left requests (>20) when enough data get from host
3. Send ACK by IN endpoint.
4. MTP submit new out urb request.
5. 4's urb never complete.

TRACE LOG:

MtpServer-2157    [000] d..3  1287.150391: cdns3_ep_dequeue: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -115, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:1 SID: 0
MtpServer-2157    [000] d..3  1287.150410: cdns3_gadget_giveback: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -104, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:0 SID: 0
MtpServer-2157    [000] d..3  1287.150433: cdns3_ep_dequeue: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -115, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:1 SID: 0
MtpServer-2157    [000] d..3  1287.150446: cdns3_gadget_giveback: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -104, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:0 SID: 0
	....
MtpServer-2157    [000] d..1  1293.630410: cdns3_alloc_request: ep1out: req: 00000000afbccb7d, req buff 0000000000000000, length: 0/0 zsi, status: 0, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0
MtpServer-2157    [000] d..2  1293.630421: cdns3_ep_queue: ep1out: req: 00000000afbccb7d, req buff 00000000871caf90, length: 0/512 zsi, status: -115, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0
MtpServer-2157    [000] d..2  1293.630445: cdns3_wa1: WA1: ep1out set guard
MtpServer-2157    [000] d..2  1293.630450: cdns3_wa1: WA1: ep1out restore cycle bit
MtpServer-2157    [000] d..2  1293.630453: cdns3_prepare_trb: ep1out: trb 000000007317b3ee, dma buf: 0xffd5bc00, size: 512, burst: 128 ctrl: 0x00000424 (C=0, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0
MtpServer-2157    [000] d..2  1293.630460: cdns3_doorbell_epx: ep1out, ep_trbaddr ffd50414
	....
irq/241-5b13000-2154    [000] d..1  1293.680849: cdns3_epx_irq: IRQ for ep1out: 01000408 ISP , ep_traddr: ffd508ac ep_last_sid: 00000000 use_streams: 0
irq/241-5b13000-2154    [000] d..1  1293.680858: cdns3_complete_trb: ep1out: trb 0000000021a11b54, dma buf: 0xffd50420, size: 16384, burst: 128 ctrl: 0x00001810 (C=0, T=0, CHAIN, LINK) SID:0 LAST_SID:0
irq/241-5b13000-2154    [000] d..1  1293.680865: cdns3_request_handled: Req: 00000000afbccb7d not handled, DMA pos: 185, ep deq: 88, ep enq: 185, start trb: 184, end trb: 184

Actually DMA pos already bigger than previous submit request afbccb7d's TRB (184-184). The reason of (not handled) is that deq position is wrong.

The TRB link is below when irq happen.

	DEQ LINK LINK LINK LINK LINK .... TRB(afbccb7d):START  DMA(EP_TRADDR).

Original code check LINK TRB, but DEQ just move one step.

	LINK DEQ LINK LINK LINK LINK .... TRB(afbccb7d):START  DMA(EP_TRADDR).

This patch skip all LINK TRB and sync DEQ to trb's start.

	LINK LINK LINK LINK LINK .... DEQ = TRB(afbccb7d):START  DMA(EP_TRADDR).

Acked-by: Peter Chen <peter.chen@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jun Li <jun.li@nxp.com>
Link: https://lore.kernel.org/r/20211130154239.8029-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 13:57:22 +01:00
Badhri Jagan Sridharan
fbcd13df1e usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect
Stub from the spec:
"4.5.2.2.4.2 Exiting from AttachWait.SNK State
A Sink shall transition to Unattached.SNK when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce.
A DRP shall transition to Unattached.SRC when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce."

This change makes TCPM to wait in SNK_DEBOUNCED state until
CC1 and CC2 pins is SNK.Open for at least tPDDebounce. Previously,
TCPM resets the port if vbus is not present in PD_T_PS_SOURCE_ON.
This causes TCPM to loop continuously when connected to a
faulty power source that does not present vbus. Waiting in
SNK_DEBOUNCED also ensures that TCPM is adherant to
"4.5.2.2.4.2 Exiting from AttachWait.SNK State" requirements.

[ 6169.280751] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 6169.280759] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS]
[ 6169.280771] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS]
[ 6169.282427] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected]
[ 6169.450825] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 6169.450834] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS]
[ 6169.930892] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms]
[ 6169.931296] disable vbus discharge ret:0
[ 6169.931301] Setting usb_comm capable false
[ 6169.932783] Setting voltage/current limit 0 mV 0 mA
[ 6169.932802] polarity 0
[ 6169.933706] Requesting mux state 0, usb-role 0, orientation 0
[ 6169.936689] cc:=0
[ 6169.936812] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS]
[ 6169.937157] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected]
[ 6170.036880] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 6170.036890] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev2 NONE_AMS]
[ 6170.036896] Start toggling
[ 6170.041412] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[ 6170.042973] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 6170.042976] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS]
[ 6170.042981] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS]
[ 6170.213014] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 6170.213019] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS]
[ 6170.693068] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms]
[ 6170.693304] disable vbus discharge ret:0
[ 6170.693308] Setting usb_comm capable false
[ 6170.695193] Setting voltage/current limit 0 mV 0 mA
[ 6170.695210] polarity 0
[ 6170.695990] Requesting mux state 0, usb-role 0, orientation 0
[ 6170.701896] cc:=0
[ 6170.702181] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS]
[ 6170.703343] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected]

Fixes: f0690a25a1 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20211130001825.3142830-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 13:57:10 +01:00
Ole Ernst
d2a004037c USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
This is another branded 8153 device that doesn't work well with LPM:
r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71

Disable LPM to resolve the issue.

Signed-off-by: Ole Ernst <olebowle@gmx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211127090546.52072-1-olebowle@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03 13:56:54 +01:00