write_super() may reallocate the superblock buffer - but
bch_sb_field_ext was referencing it; don't use it after the write_super
call.
Reported-by: syzbot+8992fc10a192067b8d8a@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
printk strings get truncated to 1024 bytes; if we have a long error
message (journal debug info) we need to use a helper.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
discard_new_inode() is the correct interface for tearing down an indoe
that was fully created but not made visible to other threads, but it
expects I_NEW to be set, which we don't use.
Reported-by: https://github.com/koverstreet/bcachefs/issues/690
Fixes: bcachefs: Fix race path in bch2_inode_insert()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Incorrect bucket state transition in the discard path; when incrementing
a bucket's generation number that had already been discarded, we were
forgetting to check if it should be need_gc_gens, not free.
This was caught by the .invalid checks in the transaction commit path,
causing us to go emergency read only.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Petr Machata says:
====================
mlxsw: Fixes
This patchset fixes an issue with mlxsw driver initialization, and a
memory corruption issue in shared buffer occupancy handling.
v3:
- Drop the core thermal fix, it's not relevant anymore.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The following two shared buffer operations make use of the Shared Buffer
Status Register (SBSR):
# devlink sb occupancy snapshot pci/0000:01:00.0
# devlink sb occupancy clearmax pci/0000:01:00.0
The register has two masks of 256 bits to denote on which ingress /
egress ports the register should operate on. Spectrum-4 has more than
256 ports, so the register was extended by cited commit with a new
'port_page' field.
However, when filling the register's payload, the driver specifies the
ports as absolute numbers and not relative to the first port of the port
page, resulting in memory corruptions [1].
Fix by specifying the ports relative to the first port of the port page.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0
Read of size 1 at addr ffff8881068cb00f by task devlink/1566
[...]
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xce/0x670
kasan_report+0xd7/0x110
mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0
mlxsw_devlink_sb_occ_snapshot+0x75/0xb0
devlink_nl_sb_occ_snapshot_doit+0x1f9/0x2a0
genl_family_rcv_msg_doit+0x20c/0x300
genl_rcv_msg+0x567/0x800
netlink_rcv_skb+0x170/0x450
genl_rcv+0x2d/0x40
netlink_unicast+0x547/0x830
netlink_sendmsg+0x8d4/0xdb0
__sys_sendto+0x49b/0x510
__x64_sys_sendto+0xe5/0x1c0
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[...]
Allocated by task 1:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
copy_verifier_state+0xbc2/0xfb0
do_check_common+0x2c51/0xc7e0
bpf_check+0x5107/0x9960
bpf_prog_load+0xf0e/0x2690
__sys_bpf+0x1a61/0x49d0
__x64_sys_bpf+0x7d/0xc0
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 1:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
poison_slab_object+0x109/0x170
__kasan_slab_free+0x14/0x30
kfree+0xca/0x2b0
free_verifier_state+0xce/0x270
do_check_common+0x4828/0xc7e0
bpf_check+0x5107/0x9960
bpf_prog_load+0xf0e/0x2690
__sys_bpf+0x1a61/0x49d0
__x64_sys_bpf+0x7d/0xc0
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: f8538aec88 ("mlxsw: Add support for more than 256 ports in SBSR register")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cited commit added support for a new reset flow ("all reset") which is
deeper than the existing reset flow ("software reset") and allows the
device's PCI firmware to be upgraded.
In the new flow the driver first tells the firmware that "all reset" is
required by issuing a new reset command (i.e., MRSR.command=6) and then
triggers the reset by having the PCI core issue a secondary bus reset
(SBR).
However, due to a race condition in the device's firmware the device is
not always able to recover from this reset, resulting in initialization
failures [1].
New firmware versions include a fix for the bug and advertise it using a
new capability bit in the Management Capabilities Mask (MCAM) register.
Avoid initialization failures by reading the new capability bit and
triggering the new reset flow only if the bit is set. If the bit is not
set, trigger a normal PCI hot reset by skipping the call to the
Management Reset and Shutdown Register (MRSR).
Normal PCI hot reset is weaker than "all reset", but it results in a
fully operational driver and allows users to flash a new firmware, if
they want to.
[1]
mlxsw_spectrum4 0000:01:00.0: not ready 1023ms after bus reset; waiting
mlxsw_spectrum4 0000:01:00.0: not ready 2047ms after bus reset; waiting
mlxsw_spectrum4 0000:01:00.0: not ready 4095ms after bus reset; waiting
mlxsw_spectrum4 0000:01:00.0: not ready 8191ms after bus reset; waiting
mlxsw_spectrum4 0000:01:00.0: not ready 16383ms after bus reset; waiting
mlxsw_spectrum4 0000:01:00.0: not ready 32767ms after bus reset; waiting
mlxsw_spectrum4 0000:01:00.0: not ready 65535ms after bus reset; giving up
mlxsw_spectrum4 0000:01:00.0: PCI function reset failed with -25
mlxsw_spectrum4 0000:01:00.0: cannot register bus device
mlxsw_spectrum4: probe of 0000:01:00.0 failed with error -25
Fixes: f257c73e53 ("mlxsw: pci: Add support for new reset flow")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Maksym Yaremchuk <maksymy@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diag_uid selftest failed on NIPA where the received nlmsg_type is
NLMSG_ERROR [0] because CONFIG_UNIX_DIAG is not set [1] by default
and sock_diag_lock_handler() failed to load the module.
# # Starting 2 tests from 2 test cases.
# # RUN diag_uid.uid.1 ...
# # diag_uid.c:159:1:Expected nlh->nlmsg_type (2) == SOCK_DIAG_BY_FAMILY (20)
# # 1: Test terminated by assertion
# # FAIL diag_uid.uid.1
# not ok 1 diag_uid.uid.1
Let's add all AF_UNIX Kconfig to the config file under af_unix dir
so that NIPA consumes it.
Fixes: ac011361bd ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.")
Link: https://netdev-3.bots.linux.dev/vmksft-net/results/644841/104-diag-uid/stdout [0]
Link: https://netdev-3.bots.linux.dev/vmksft-net/results/644841/config [1]
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240617073033.0cbb829d@kernel.org/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
max_sge attribute is passed by the user, and is inserted and used
unchecked, so verify that the value doesn't exceed maximum allowed value
before using it.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/277ccc29e8d57bfd53ddeb2ac633f2760cf8cdd0.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
cachable and mmkey.rb_key together are used by mlx5_revoke_mr() to put the
MR/mkey back into the cache. In all cases they should be set correctly.
alloc_cacheable_mr() was setting cachable but not filling rb_key,
resulting in cache_ent_find_and_store() bucketing them all into a 0 length
entry.
implicit_get_child_mr()/mlx5_ib_alloc_implicit_mr() failed to set cachable
or rb_key at all, so the cache was not working at all for implicit ODP.
Cc: stable@vger.kernel.org
Fixes: 8c1185fef6 ("RDMA/mlx5: Change check for cacheable mkeys")
Fixes: dd1b913fb0 ("RDMA/mlx5: Cache all user cacheable mkeys on dereg MR flow")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7778c02dfa0999a30d6746c79a23dd7140a9c729.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When a cache ent already exists but doesn't have any mkeys in it the cache
will automatically create a new one based on the specification in the
ent->rb_key.
ent->ats was missed when creating the new key and so ma_translation_mode
was not being set even though the ent requires it.
Cc: stable@vger.kernel.org
Fixes: 73d09b2fe8 ("RDMA/mlx5: Introduce mlx5r_cache_rb_key")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/7c5613458ecb89fbe5606b7aa4c8d990bdea5b9a.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The below commit lifted the locking out of this function but left this
error path unlock behind resulting in unbalanced locking. Remove the
missed unlock too.
Cc: stable@vger.kernel.org
Fixes: 627122280c ("RDMA/mlx5: Add work to remove temporary entries from the cache")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/78090c210c750f47219b95248f9f782f34548bb1.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using GuestMaxPhyAddr
from KVM's supported CPUID (if it's available).
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are atomic.
- Fix technically benign bug in __kvm_handle_hva_range() where KVM consumes
the return from a void-returning function as if it were a boolean.
-----BEGIN PGP SIGNATURE-----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=Qdo9
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.10-rcN' of https://github.com/kvm-x86/linux into HEAD
KVM fixes for 6.10
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using GuestMaxPhyAddr
from KVM's supported CPUID (if it's available).
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are atomic.
- Fix technically benign bug in __kvm_handle_hva_range() where KVM consumes
the return from a void-returning function as if it were a boolean.
When CONFIG_PCI_IOV=n, the build of the QAT vfio pci variant driver
fails reporting the following linking errors:
ERROR: modpost: "qat_vfmig_open" [drivers/vfio/pci/qat/qat_vfio_pci.ko] undefined!
ERROR: modpost: "qat_vfmig_resume" [drivers/vfio/pci/qat/qat_vfio_pci.ko] undefined!
ERROR: modpost: "qat_vfmig_save_state" [drivers/vfio/pci/qat/qat_vfio_pci.ko] undefined!
ERROR: modpost: "qat_vfmig_suspend" [drivers/vfio/pci/qat/qat_vfio_pci.ko] undefined!
ERROR: modpost: "qat_vfmig_load_state" [drivers/vfio/pci/qat/qat_vfio_pci.ko] undefined!
ERROR: modpost: "qat_vfmig_reset" [drivers/vfio/pci/qat/qat_vfio_pci.ko] undefined!
ERROR: modpost: "qat_vfmig_save_setup" [drivers/vfio/pci/qat/qat_vfio_pci.ko] undefined!
ERROR: modpost: "qat_vfmig_destroy" [drivers/vfio/pci/qat/qat_vfio_pci.ko] undefined!
ERROR: modpost: "qat_vfmig_close" [drivers/vfio/pci/qat/qat_vfio_pci.ko] undefined!
ERROR: modpost: "qat_vfmig_cleanup" [drivers/vfio/pci/qat/qat_vfio_pci.ko] undefined!
WARNING: modpost: suppressed 1 unresolved symbol warnings because there were too many)
Make live migration helpers provided by QAT PF driver always available
even if CONFIG_PCI_IOV is not selected. This does not cause any side
effect.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/lkml/20240607153406.60355e6c.alex.williamson@redhat.com/T/
Fixes: bb208810b1 ("vfio/qat: Add vfio_pci driver for Intel QAT SR-IOV VF devices")
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Our corporate overlords have been changing the domains around
again and this mailing list has gone away.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add nop variants of i2c_find_device_by_fwnode(),
i2c_find_adapter_by_fwnode() and i2c_get_adapter_by_fwnode() for use
without CONFIG_I2C.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
With commit 27bd5fdc24 ("KVM: SEV-ES: Prevent MSR access post VMSA
encryption"), older VMMs like QEMU 9.0 and older will fail when booting
SEV-ES guests with something like the following error:
qemu-system-x86_64: error: failed to get MSR 0x174
qemu-system-x86_64: ../qemu.git/target/i386/kvm/kvm.c:3950: kvm_get_msrs: Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
This is because older VMMs that might still call
svm_get_msr()/svm_set_msr() for SEV-ES guests after guest boot even if
those interfaces were essentially just noops because of the vCPU state
being encrypted and stored separately in the VMSA. Now those VMMs will
get an -EINVAL and generally crash.
Newer VMMs that are aware of KVM_SEV_INIT2 however are already aware of
the stricter limitations of what vCPU state can be sync'd during
guest run-time, so newer QEMU for instance will work both for legacy
KVM_SEV_ES_INIT interface as well as KVM_SEV_INIT2.
So when using KVM_SEV_INIT2 it's okay to assume userspace can deal with
-EINVAL, whereas for legacy KVM_SEV_ES_INIT the kernel might be dealing
with either an older VMM and so it needs to assume that returning
-EINVAL might break the VMM.
Address this by only returning -EINVAL if the guest was started with
KVM_SEV_INIT2. Otherwise, just silently return.
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nikunj A Dadhania <nikunj@amd.com>
Reported-by: Srikanth Aithal <sraithal@amd.com>
Closes: https://lore.kernel.org/lkml/37usuu4yu4ok7be2hqexhmcyopluuiqj3k266z4gajc2rcj4yo@eujb23qc3zcm/
Fixes: 27bd5fdc24 ("KVM: SEV-ES: Prevent MSR access post VMSA encryption")
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240604233510.764949-1-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge ACPI device enumeration fixes for 6.10-rc5:
- Ignore MIPI camera graph port nodes created with the help of the
information from the ACPI tables on all Dell Tiger, Alder and Raptor
Lake models as that information is reported to be invalid on the
systems in question (Hans de Goede).
- Use new Intel CPU model matching macros in the MIPI DisCo for Imaging
part of ACPI device enumeration (Hans de Goede).
* acpi-scan:
ACPI: mipi-disco-img: Switch to new Intel CPU model defines
ACPI: scan: Ignore camera graph port nodes on all Dell Tiger, Alder and Raptor Lake models
Selecting FW_UPLOAD is not sufficient as it allows the firmware loader
API to be built as a module alongside the pd692x0 driver built as builtin.
Add select FW_LOADER to fix this issue.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406200632.hSChnX0g-lkp@intel.com/
Fixes: 9a99384518 ("net: pse-pd: Add PD692x0 PSE controller driver")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The __ethtool_get_ts_info function returns directly if the device has a
get_ts_info() method. For bonding with an active slave, this works correctly
as we simply return the real device's timestamping information. However,
when there is no active slave, we only check the slave's TX software
timestamp information. We still need to set the phc index and RX timestamp
information manually. Otherwise, the result will be look like:
Time stamping parameters for bond0:
Capabilities:
software-transmit
PTP Hardware Clock: 0
Hardware Transmit Timestamp Modes: none
Hardware Receive Filter Modes: none
This issue does not affect VLAN or MACVLAN devices, as they only have one
downlink and can directly use the downlink's timestamping information.
Fixes: b8768dc407 ("net: ethtool: Refactor identical get_ts_info implementations.")
Reported-by: Liang Li <liali@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-42409
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fill this in so user-space can identify multiple ports on the same CP
unit.
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilya found a failure in running check-kernel tests with at_groups=144
(144: conntrack - FTP SNAT orig tuple) in OVS repo. After his further
investigation, the root cause is that the labels sent to userspace
for related ct are incorrect.
The labels for unconfirmed related ct should use its master's labels.
However, the changes made in commit 8c8b733208 ("openvswitch: set
IPS_CONFIRMED in tmpl status only when commit is set in conntrack")
led to getting labels from this related ct.
So fix it in ovs_ct_get_labels() by changing to copy labels from its
master ct if it is a unconfirmed related ct. Note that there is no
fix needed for ct->mark, as it was already copied from its master
ct for related ct in init_conntrack().
Fixes: 8c8b733208 ("openvswitch: set IPS_CONFIRMED in tmpl status only when commit is set in conntrack")
Reported-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Tested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the mcp251xfd_start_xmit() function fails, the driver stops
processing messages, and the interrupt routine does not return,
running indefinitely even after killing the running application.
Error messages:
[ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16
[ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3).
... and repeat forever.
The issue can be triggered when multiple devices share the same SPI
interface. And there is concurrent access to the bus.
The problem occurs because tx_ring->head increments even if
mcp251xfd_start_xmit() fails. Consequently, the driver skips one TX
package while still expecting a response in
mcp251xfd_handle_tefif_one().
Resolve the issue by starting a workqueue to write the tx obj
synchronously if err = -EBUSY. In case of another error, decrement
tx_ring->head, remove skb from the echo stack, and drop the message.
Fixes: 55e5b97f00 ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Cc: stable@vger.kernel.org
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Link: https://lore.kernel.org/all/20240517134355.770777-1-ivitro@gmail.com
[mkl: use more imperative wording in patch description]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
As the potential failure of usb_submit_urb(), it should be better to
return the err variable to catch the error.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/all/20240521041020.1519416-1-nichen@iscas.ac.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Addresses an issue where a CAN bus error during a BAM transmission
could stall the socket queue, preventing further transmissions even
after the bus error is resolved. The fix activates the next queued
session after the error recovery, allowing communication to continue.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Cc: stable@vger.kernel.org
Reported-by: Alexander Hölzl <alexander.hoelzl@gmx.net>
Tested-by: Alexander Hölzl <alexander.hoelzl@gmx.net>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20240528070648.1947203-1-o.rempel@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch enhances error handling in scenarios with RTS (Request to
Send) messages arriving closely. It replaces the less informative WARN_ON_ONCE
backtraces with a new error handling method. This provides clearer error
messages and allows for the early termination of problematic sessions.
Previously, sessions were only released at the end of j1939_xtp_rx_rts().
Potentially this could be reproduced with something like:
testj1939 -r vcan0:0x80 &
while true; do
# send first RTS
cansend vcan0 18EC8090#1014000303002301;
# send second RTS
cansend vcan0 18EC8090#1014000303002301;
# send abort
cansend vcan0 18EC8090#ff00000000002301;
done
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Reported-by: syzbot+daa36413a5cedf799ae4@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20231117124959.961171-1-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This is almost compatible, but passing a negative offset should result
in a EINVAL error, but on mips o32 compat mode would seek to a large
32-bit byte offset.
Use compat_sys_lseek() to correctly sign-extend the argument.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Target register of mftc0 should be __res instead of $1, this is
a leftover from old .insn code.
Fixes: dd6d29a614 ("MIPS: Implement microMIPS MT ASE helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The very first flush in any port will flush all learned addresses in all
ports. This can be observed by unplugging the cable from one port while
additional ports are connected and dumping the fdb entries.
This problem is caused by the initially wrong value programmed to the
REG_SW_LUE_CTRL_1 register. Setting SW_FLUSH_STP_TABLE and
SW_FLUSH_MSTP_TABLE bits does not have an immediate effect. It is when
ksz9477_flush_dyn_mac_table() is called then the SW_FLUSH_STP_TABLE bit
takes effect and flushes all learned entries. After that call both bits
are reset and so the next port flush will not cause such problem again.
Fixes: b987e98e50 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Link: https://patch.msgid.link/1718756202-2731-1-git-send-email-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the current code, if multiple hardware breakpoints/watchpoints in
a user-space thread, some of them will not be triggered.
When debugging the following code using gdb.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
printf("start test\n");
a = 1;
printf("a = %d\n", a);
printf("end test\n");
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) watch a
Hardware watchpoint 2: a
(gdb) hbreak 8
Hardware assisted breakpoint 3 at 0x1200006ec: file test.c, line 8.
(gdb) c
Continuing.
start test
a = 1
Breakpoint 3, main () at test.c:8
8 printf("end test\n");
...
The first hardware watchpoint is not triggered, the root causes are:
1. In hw_breakpoint_control(), The FWPnCFG1.2.4/MWPnCFG1.2.4 register
settings are not distinguished. They should be set based on hardware
watchpoint functions (fetch or load/store operations).
2. In breakpoint_handler() and watchpoint_handler(), it doesn't identify
which watchpoint is triggered. So, all watchpoint-related perf_event
callbacks are called and siginfo is sent to the user space. This will
cause user-space unable to determine which watchpoint is triggered.
The kernel need to identity which watchpoint is triggered via MWPS/
FWPS registers, and then call the corresponding perf event callbacks
to report siginfo to the user-space.
Modify the relevant code to solve above issues.
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
With this patch:
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) watch a
Hardware watchpoint 2: a
(gdb) hbreak 8
Hardware assisted breakpoint 3 at 0x1200006ec: file test.c, line 8.
(gdb) c
Continuing.
start test
Hardware watchpoint 2: a
Old value = 0
New value = 1
main () at test.c:7
7 printf("a = %d\n", a);
(gdb) c
Continuing.
a = 1
Breakpoint 3, main () at test.c:8
8 printf("end test\n");
(gdb) c
Continuing.
end test
[Inferior 1 (process 778) exited normally]
Cc: stable@vger.kernel.org
Signed-off-by: Hui Li <lihui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In the current code, gdb can set the watchpoint successfully through
ptrace interface, but watchpoint will not be triggered.
When debugging the following code using gdb.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
a = 1;
printf("a = %d\n", a);
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) watch a
...
(gdb) r
...
a = 1
[Inferior 1 (process 4650) exited normally]
No watchpoints were triggered, the root causes are:
1. Kernel uses perf_event and hw_breakpoint framework to control
watchpoint, but the perf_event corresponding to watchpoint is
not enabled. So it needs to be enabled according to MWPnCFG3
or FWPnCFG3 PLV bit field in ptrace_hbp_set_ctrl(), and privilege
is set according to the monitored addr in hw_breakpoint_control().
Furthermore, add a judgment in ptrace_hbp_set_addr() to ensure
kernel-space addr cannot be monitored in user mode.
2. The global enable control for all watchpoints is the WE bit of
CSR.CRMD, and hardware sets the value to 0 when an exception is
triggered. When the ERTN instruction is executed to return, the
hardware restores the value of the PWE field of CSR.PRMD here.
So, before a thread containing watchpoints be scheduled, the PWE
field of CSR.PRMD needs to be set to 1. Add this modification in
hw_breakpoint_control().
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpointshttps://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#basic-control-and-status-registers
With this patch:
lihui@bogon:~$ gdb test
...
(gdb) watch a
Hardware watchpoint 1: a
(gdb) r
...
Hardware watchpoint 1: a
Old value = 0
New value = 1
main () at test.c:6
6 printf("a = %d\n", a);
(gdb) c
Continuing.
a = 1
[Inferior 1 (process 775) exited normally]
Cc: stable@vger.kernel.org
Signed-off-by: Hui Li <lihui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In the current code, when debugging the following code using gdb,
"invalid argument ..." message will be displayed.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
a = 1;
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) watch a
Hardware watchpoint 1: a
(gdb) r
...
Invalid argument setting hardware debug registers
There are mainly two types of issues.
1. Some incorrect judgment condition existed in user_watch_state
argument parsing, causing -EINVAL to be returned.
When setting up a watchpoint, gdb uses the ptrace interface,
ptrace(PTRACE_SETREGSET, tid, NT_LOONGARCH_HW_WATCH, (void *) &iov)).
Register values in user_watch_state as follows:
addr[0] = 0x0, mask[0] = 0x0, ctrl[0] = 0x0
addr[1] = 0x0, mask[1] = 0x0, ctrl[1] = 0x0
addr[2] = 0x0, mask[2] = 0x0, ctrl[2] = 0x0
addr[3] = 0x0, mask[3] = 0x0, ctrl[3] = 0x0
addr[4] = 0x0, mask[4] = 0x0, ctrl[4] = 0x0
addr[5] = 0x0, mask[5] = 0x0, ctrl[5] = 0x0
addr[6] = 0x0, mask[6] = 0x0, ctrl[6] = 0x0
addr[7] = 0x12000803c, mask[7] = 0x0, ctrl[7] = 0x610
In arch_bp_generic_fields(), return -EINVAL when ctrl.len is
LOONGARCH_BREAKPOINT_LEN_8(0b00). So delete the incorrect judgment here.
In ptrace_hbp_fill_attr_ctrl(), when note_type is NT_LOONGARCH_HW_WATCH
and ctrl[0] == 0x0, if ((type & HW_BREAKPOINT_RW) != type) will return
-EINVAL. Here ctrl.type should be set based on note_type, and unnecessary
judgments can be removed.
2. The watchpoint argument was not set correctly due to unnecessary
offset and alignment_mask.
Modify ptrace_hbp_fill_attr_ctrl() and hw_breakpoint_arch_parse(), which
ensure the watchpont argument is set correctly.
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
Cc: stable@vger.kernel.org
Signed-off-by: Hui Li <lihui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Setting IACK bit when core is disabled does not clear the "Interrupt Flag"
bit in the status register, and the interrupt remains pending.
Sometimes it causes failure for the very first message transfer, that is
usually a device probe.
Hence, set IACK bit after core is enabled to clear pending interrupt.
Fixes: 18f98b1e31 ("[PATCH] i2c: New bus driver for the OpenCores I2C controller")
Signed-off-by: Grygorii Tertychnyi <grygorii.tertychnyi@leica-geosystems.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The referenced i2c-controller.yaml schema is provided by dtschema
package (outside of Linux kernel), so use full path to reference it.
Cc: stable@vger.kernel.org
Fixes: 1acd4577a6 ("dt-bindings: i2c: convert i2c-cros-ec-tunnel to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The referenced i2c-controller.yaml schema is provided by dtschema
package (outside of Linux kernel), so use full path to reference it.
Cc: stable@vger.kernel.org
Fixes: 7ea75dd386 ("dt-bindings: i2c: convert i2c-at91 to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
- Fix dangling references to a redistributor region if
the vgic was prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that
both parties can make forward progress.
-----BEGIN PGP SIGNATURE-----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=rnyP
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.10, take #2
- Fix dangling references to a redistributor region if
the vgic was prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that
both parties can make forward progress.
