The Arm FF for Armv8-A specification has concept of endpoints or
partitions. In the Normal world, a partition could be a VM when
the Virtualization extension is enabled or the kernel itself.
In order to handle multiple partitions, we can create a FFA device for
each such partition on a dedicated FFA bus. Similarly, different drivers
requiring FFA transport can be registered on the same bus. We can match
the device and drivers using UUID. This is mostly for the in-kernel
users with FFA drivers.
Link: https://lore.kernel.org/r/20210521151033.181846-2-sudeep.holla@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Now, with all the plumbing in place to enable building scmi as a module
instead of built-in modules, let us enable the same.
Link: https://lore.kernel.org/r/20200907195046.56615-5-sudeep.holla@arm.com
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
In order to add newer SMCCC v1.1+ functionality and to avoid cluttering
PSCI firmware driver with SMCCC bits, let us move the SMCCC specific
details under drivers/firmware/smccc/smccc.c
We can also drop conduit and smccc_version from psci_operations structure
as SMCCC was the sole user and now it maintains those.
No functionality change in this patch though.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@st.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200518091222.27467-6-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Dynamically support SMCCCC and legacy conventions by detecting which
convention to use at runtime. qcom_scm_call_atomic and qcom_scm_call can
then be moved in qcom_scm.c and use underlying convention backend as
appropriate. Thus, rename qcom_scm-64,-32 to reflect that they are
backends for -smc and -legacy, respectively.
Also add support for making SCM calls earlier than when SCM driver
probes to support use cases such as qcom_scm_set_cold_boot_addr. Support
is added by lazily initializing the convention and guarding the query
with a spin lock. The limitation of these early SCM calls is that they
cannot use DMA, as in the case of >4 arguments for SMC convention and
any non-atomic call for legacy convention.
Tested-by: Brian Masney <masneyb@onstation.org> # arm32
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Elliot Berman <eberman@codeaurora.org>
Link: https://lore.kernel.org/r/1578431066-19600-18-git-send-email-eberman@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Here is the big char/misc driver pull request for 5.4-rc1.
As has been happening in previous releases, more and more individual
driver subsystem trees are ending up in here. Now if that is good or
bad I can't tell, but hopefully it makes your life easier as it's more
of an aggregation of trees together to one merge point for you.
Anyway, lots of stuff in here:
- habanalabs driver updates
- thunderbolt driver updates
- misc driver updates
- coresight and intel_th hwtracing driver updates
- fpga driver updates
- extcon driver updates
- some dma driver updates
- char driver updates
- android binder driver updates
- nvmem driver updates
- phy driver updates
- parport driver fixes
- pcmcia driver fix
- uio driver updates
- w1 driver updates
- configfs fixes
- other assorted driver updates
All of these have been in linux-next for a long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXYIT1g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym9lwCgrHZlMMvfYNVm6GQ5ge58JJsVTL4AoNatTcL4
hfVMA6pCHWBjV65xVSf6
=Tijw
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver pull request for 5.4-rc1.
As has been happening in previous releases, more and more individual
driver subsystem trees are ending up in here. Now if that is good or
bad I can't tell, but hopefully it makes your life easier as it's more
of an aggregation of trees together to one merge point for you.
Anyway, lots of stuff in here:
- habanalabs driver updates
- thunderbolt driver updates
- misc driver updates
- coresight and intel_th hwtracing driver updates
- fpga driver updates
- extcon driver updates
- some dma driver updates
- char driver updates
- android binder driver updates
- nvmem driver updates
- phy driver updates
- parport driver fixes
- pcmcia driver fix
- uio driver updates
- w1 driver updates
- configfs fixes
- other assorted driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits)
misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation
habanalabs: correctly cast variable to __le32
habanalabs: show correct id in error print
habanalabs: stop using the acronym KMD
habanalabs: display card name as sensors header
habanalabs: add uapi to retrieve aggregate H/W events
habanalabs: add uapi to retrieve device utilization
habanalabs: Make the Coresight timestamp perpetual
habanalabs: explicitly set the queue-id enumerated numbers
habanalabs: print to kernel log when reset is finished
habanalabs: replace __le32_to_cpu with le32_to_cpu
habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64
habanalabs: Handle HW_IP_INFO if device disabled or in reset
habanalabs: Expose devices after initialization is done
habanalabs: improve security in Debug IOCTL
habanalabs: use default structure for user input in Debug IOCTL
habanalabs: Add descriptive name to PSOC app status register
habanalabs: Add descriptive names to PSOC scratch-pad registers
habanalabs: create two char devices per ASIC
habanalabs: change device_setup_cdev() to be more generic
...
This adds a driver to communicate with the firmware running on the
secure processor of the Turris Mox router, enabling the kernel to
retrieve true random numbers from the Entropy Bit Generator and to read
some information burned into eFuses when device was manufactured:
and to
sign messages with the ECDSA private key burned into each Turris Mox
device when manufacturing.
This also adds support to read other information burned into eFuses:
- serial number
- board version
- MAC addresses
- RAM size
- ECDSA public key (this is not read directly from eFuses, rather it
is computed by the firmware as pair to the burned private key)
The source code of the firmware is open source and can be found at
https://gitlab.labs.nic.cz/turris/mox-boot-builder/tree/master/wtmi
The firmware is also able to, on demand, sign messages with the burned
ECDSA private key, but since Linux's akcipher API is not yet stable
(and therefore not exposed to userspace via netlink), this functionality
is not supported yet.
Link: https://lore.kernel.org/r/20190822014318.19478-3-marek.behun@nic.cz
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Intel Remote System Update (RSU) driver exposes interfaces access
through the Intel Service Layer to user space via sysfs interface.
The RSU interfaces report and control some of the optional RSU features
on Intel Stratix 10 SoC.
The RSU feature provides a way for customers to update the boot
configuration of a Intel Stratix 10 SoC device with significantly reduced
risk of corrupting the bitstream storage and bricking the system.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Reviewed-by: Alan Tull <atull@kernel.org>
Link: https://lore.kernel.org/r/1567516701-26026-3-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to multiplatform enabled.
- Cleanups of Davinci
This tag also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release.
-----BEGIN PGP SIGNATURE-----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=pUeO
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to
multiplatform enabled.
- Cleanups of Davinci
This also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
ARM: debug-ll: add default address for digicolor
ARM: u300: regulator: add MODULE_LICENSE()
ARM: ep93xx: move private headers out of mach/*
ARM: ep93xx: move pinctrl interfaces into include/linux/soc
ARM: ep93xx: keypad: stop using mach/platform.h
ARM: ep93xx: move network platform data to separate header
ARM: stm32: add AMBA support for stm32 family
MAINTAINERS: update arch/arm/mach-davinci
ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
soc: ixp4xx: qmgr: Add DT probe code
soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
soc: ixp4xx: npe: Add DT probe code
soc: ixp4xx: Add DT bindings for IXP4xx NPE
soc: ixp4xx: qmgr: Pass resources
soc: ixp4xx: Remove unused functions
soc: ixp4xx: Uninline several functions
soc: ixp4xx: npe: Pass addresses as resources
ARM: ixp4xx: Turn the QMGR into a platform device
ARM: ixp4xx: Turn the NPE into a platform device
...
Move the Trusted Foundations support out of arch/arm/firmware and into
drivers/firmware where most other firmware support implementations are
located.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Some following changes extends the PSCI driver with some additional
files. Avoid to continue cluttering the toplevel firmware directory
and first move the PSCI files into a PSCI sub-directory.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some features of the Intel Stratix10 SoC require a level of privilege
higher than the kernel is granted. Such secure features include
FPGA programming. In terms of the ARMv8 architecture, the kernel runs
at Exception Level 1 (EL1), access to the features requires
Exception Level 3 (EL3).
The Intel Stratix10 SoC service layer provides an in kernel API for
drivers to request access to the secure features. The requests are queued
and processed one by one. ARM’s SMCCC is used to pass the execution
of the requests on to a secure monitor (EL3).
The header file stratix10-sve-client.h defines the interface between
service providers (FPGA manager is one of them) and service layer.
The header file stratix10-smc.h defines the secure monitor call (SMC)
message protocols used for service layer driver in normal world
(EL1) to communicate with secure monitor SW in secure monitor exception
level 3 (EL3).
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the Dell dcdbas and dell_rbu drivers into platform/drivers/x86 as
they are closely coupled with other drivers in this location.
Improve _init* usage for acerhdf and fix some usage issues with messages
and module parameters.
Simplify asus-wmi by calling ACPI/WMI methods directly, eliminating
workqueue overhead, eliminate double reporting of keyboard backlight.
Fix wake from USB failure on Bay Trail devices (intel_int0002_vgpio).
Notify intel_telemetry users when IPC1 device is not enabled.
Update various drivers with new laptop model IDs.
Update several intel drivers to use SPDX identifers and order headers
alphabetically.
The following is an automated git shortlog grouped by driver:
Add Intel AtomISP2 dummy / power-management driver:
- Add Intel AtomISP2 dummy / power-management driver
lg-laptop:
- Add LG Gram laptop special features driver
HID:
- asus: only support backlight when it's not driven by WMI
MAINTAINERS:
- intel_telemetry: Update maintainers info
- intel_pmc_core: Update MAINTAINERS
- Update maintainer for dcdbas and dell_rbu
- Use my infradead account exclusively for PDx86 work
acerhdf:
- restructure to allow large BIOS table be __initconst
- mark appropriate content with __init prefix
- Add BIOS entry for Gateway LT31 v1.3307
- Remove cut-and-paste trap from instructions
- Enable ability to list supported systems
- clarify modinfo messages for BIOS override
asus-wmi:
- export function for evaluating WMI methods
- Only notify kbd LED hw_change by fn-key pressed
- Simplify the keyboard brightness updating process
firmware:
- dcdbas: include linux/io.h
- dcdbas: Move dcdbas to drivers/platform/x86
- dell_rbu: Move dell_rbu to drivers/platform/x86
- dcdbas: Add support for WSMT ACPI table
- dell_rbu: Make payload memory uncachable
ideapad-laptop:
- Add Y530-15ICH to no_hw_rfkill
- Use __func__ instead of read_ec_cmd in pr_err
intel-hid:
- Convert to use SPDX identifier
intel-ips:
- Convert to use SPDX identifier
intel-rst:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel-smartconnect:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel-wmi-thunderbolt:
- Add dynamic debugging
- Convert to use SPDX identifier
intel_bxtwc_tmu:
- Convert to use SPDX identifier
intel_cht_int33fe:
- Convert to use SPDX identifier
intel_chtdc_ti_pwrbtn:
- Add SPDX identifier
intel_int0002_vgpio:
- Convert to use SPDX identifier
- Implement irq_set_wake
- Enable the driver on Bay Trail platforms
intel_menlow:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_mid_powerbtn:
- Convert to use SPDX identifier
- Remove unnecessary init.h inclusion
- Get rid of custom ICPU() macro
intel_mid_thermal:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_oaktrail:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_pmc:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_punit_ipc:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_scu_ipc:
- Convert to use SPDX identifier
- Sort headers alphabetically
intel_telemetry:
- Get rid of custom macro
- report debugfs failure
- Convert to use SPDX identifier
intel_turbo_max_3:
- Convert to use SPDX identifier
- Sort headers alphabetically
mlx-platform:
- Properly use mlxplat_mlxcpld_msn201x_items
touchscreen_dmi:
- Add min-x and min-y settings for various models
- Add info for the Onda V80 Plus v3 tablet
- Add info for the Trekstor Primetab T13B tablet
- Add info for the Trekstor Primebook C11 convertible
tracing:
- Trivia spelling fix containerof() -> container_of()
wmi:
- declare device_type structure as constant
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJb2mDCAAoJEKbMaAwKp364KdkH/Rar8cenw7uFeVzT5o4fGzTn
0Oo1Pnwh+hPgmQwmf8O/mHsa/1Zb9nX4nNLU/ysDUjAAZ9wZLoB57HlImQquPA74
c8lXTz5MVF140WB1f1Ck5PmeonJR2Xve7HTYCoBmGo71jOxHxCgJbp1Giiho0Imd
3NXzzahEnAiy/L5PhqqYTmIfTeAHQ2Fo7GkHCjMnS20FP2fBtvPrc7db03F+FZ4y
QTfbT0oR42NdeW21AbCRGY3P47axB3xDJX4LOYrb4uo4CIzd1yatlHk407NRRyv8
pab6aeJR23FouA/tcvv+T36D3vqRw78e6BWdoyowWOd7CUOgjtSC3lKGzfT6hSY=
=0BDZ
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
- Move the Dell dcdbas and dell_rbu drivers into platform/drivers/x86
as they are closely coupled with other drivers in this location.
- Improve _init* usage for acerhdf and fix some usage issues with
messages and module parameters.
- Simplify asus-wmi by calling ACPI/WMI methods directly, eliminating
workqueue overhead, eliminate double reporting of keyboard backlight.
- Fix wake from USB failure on Bay Trail devices (intel_int0002_vgpio).
- Notify intel_telemetry users when IPC1 device is not enabled.
- Update various drivers with new laptop model IDs.
- Update several intel drivers to use SPDX identifers and order headers
alphabetically.
* tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
HID: asus: only support backlight when it's not driven by WMI
platform/x86: asus-wmi: export function for evaluating WMI methods
platform/x86: asus-wmi: Only notify kbd LED hw_change by fn-key pressed
platform/x86: wmi: declare device_type structure as constant
platform/x86: ideapad: Add Y530-15ICH to no_hw_rfkill
platform/x86: Add Intel AtomISP2 dummy / power-management driver
platform/x86: touchscreen_dmi: Add min-x and min-y settings for various models
platform/x86: touchscreen_dmi: Add info for the Onda V80 Plus v3 tablet
platform/x86: touchscreen_dmi: Add info for the Trekstor Primetab T13B tablet
platform/x86: intel_telemetry: Get rid of custom macro
platform/x86: intel_telemetry: report debugfs failure
MAINTAINERS: intel_telemetry: Update maintainers info
platform/x86: Add LG Gram laptop special features driver
platform/x86: asus-wmi: Simplify the keyboard brightness updating process
platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11 convertible
platform/x86: mlx-platform: Properly use mlxplat_mlxcpld_msn201x_items
MAINTAINERS: intel_pmc_core: Update MAINTAINERS
firmware: dcdbas: include linux/io.h
platform/x86: intel-wmi-thunderbolt: Add dynamic debugging
platform/x86: intel-wmi-thunderbolt: Convert to use SPDX identifier
...
- A series from Aisheng Dong to add SCU firmware driver for i.MX8
SoCs. It implements IPC mechanism based on mailbox for message
exchange between AP and SCU firmware, and a set of SCU IPC
service APIs used by clients like i.MX8 power domain and clock
drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbu28SAAoJEFBXWFqHsHzOjMYIAI67+hAik09NkEQKovKjJCDz
N6k1XzY0LJl1tvaQ8x/txmp0l/4yosr8eWr+Lp+rhNrO0B48WmAccqnhaXpm2esZ
6NqBOMWt32Rue08dscaCaz5/SJHjzUlvkzjKbeMrwe/UZZWY3jn16fxqDknINjq4
Zout0CyD4Dwh9AYPDbayVGnWb68BtiZvgFch99GP3pJnK5hzH7uYpLlGTmbpDn5S
4uRVUtXOn/Y+ADhNORDjeP6t4DnLDnEQ5QpTyjYxryd4Su/yiLih41UeyqvfEyQ4
hLxdkve+JNWQpbfcE1F1Sz6yM+nb33Or0PNzsIaTV9jtNSozwoRLqa79OKD4oAA=
=x2CN
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
i.MX drivers change for 4.20, round 2:
- A series from Aisheng Dong to add SCU firmware driver for i.MX8
SoCs. It implements IPC mechanism based on mailbox for message
exchange between AP and SCU firmware, and a set of SCU IPC
service APIs used by clients like i.MX8 power domain and clock
drivers.
* tag 'imx-drivers-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
MAINTAINERS: imx: include drivers/firmware/imx path
firmware: imx: add misc svc support
firmware: imx: add SCU firmware driver support
dt-bindings: arm: fsl: add scu binding doc
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The System Controller Firmware (SCFW) is a low-level system function
which runs on a dedicated Cortex-M core to provide power, clock, and
resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
(QM, QP), and i.MX8QX (QXP, DX).
This patch implements the SCU firmware IPC function and the common
message sending API sc_call_rpc.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move dcdbas to the more appropriate directory drivers/platform/x86.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Move dell_rbu to the more appropriate directory drivers/platform/x86.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This patch is adding communication layer with firmware.
Firmware driver provides an interface to firmware APIs.
Interface APIs can be used by any driver to communicate to
PMUFW(Platform Management Unit). All requests go through ATF.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The SCMI is intended to allow OSPM to manage various functions that are
provided by the hardware platform it is running on, including power and
performance functions. SCMI provides two levels of abstraction, protocols
and transports. Protocols define individual groups of system control and
management messages. A protocol specification describes the messages
that it supports. Transports describe the method by which protocol
messages are communicated between agents and the platform.
This patch adds basic infrastructure to manage the message allocation,
initialisation, packing/unpacking and shared memory management.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The Software Delegated Exception Interface (SDEI) is an ARM standard
for registering callbacks from the platform firmware into the OS.
This is typically used to implement firmware notifications (such as
firmware-first RAS) or promote an IRQ that has been promoted to a
firmware-assisted NMI.
Add the code for detecting the SDEI version and the framework for
registering and unregistering events. Subsequent patches will add the
arch-specific backend code and the necessary power management hooks.
Only shared events are supported, power management, private events and
discovery for ACPI systems will be added by later patches.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge "ARM: keystone: add TI SCI protocol support for v4.10" from
Tero Kristo:
[description taken from http://processors.wiki.ti.com/index.php/TISCI
Texas Instruments' Keystone generation System on Chips (SoC) starting
with 66AK2G02, now include a dedicated SoC System Control entity called
PMMC(Power Management Micro Controller) in line with ARM architecture
recommendations. The function of this module is to integrate all system
operations in a centralized location. Communication with the SoC System
Control entity from various processing units like ARM/DSP occurs over
Message Manager hardware block.
...
Texas Instruments' System Control Interface defines the communication
protocol between various processing entities to the System Control Entity
on TI SoCs. This is a set of message formats and sequence of operations
required to communicate and get system services processed from System
Control entity in the SoC.]
* 'for-4.10-ti-sci-base' of https://github.com/t-kristo/linux-pm:
firmware: ti_sci: Add support for reboot core service
firmware: ti_sci: Add support for Clock control
firmware: ti_sci: Add support for Device control
firmware: Add basic support for TI System Control Interface (TI-SCI) protocol
Documentation: Add support for TI System Control Interface (TI-SCI) protocol
On arm and arm64, PSCI is one of the possible firmware interfaces
used for power management. This includes both turning CPUs on and off,
and suspending them (entering idle states).
This patch adds a PSCI checker module that enables basic testing of
PSCI operations during startup. There are two main tests: CPU
hotplugging and suspending.
In the hotplug tests, the hotplug API is used to turn off and on again
all CPUs in the system, and then all CPUs in each cluster, checking
the consistency of the return codes.
In the suspend tests, a high-priority thread is created on each core
and uses low-level cpuidle functionalities to enter suspend, in all
the possible states and multiple times. This should allow a maximum
number of CPUs to enter the same sleep state at the same or slightly
different time.
In essence, the suspend tests use a principle similar to that of the
intel_powerclamp driver (drivers/thermal/intel_powerclamp.c), but the
threads are only kept for the duration of the test (they are already
gone when userspace is started) and it does not require to stop/start
the tick.
While in theory power management PSCI functions (CPU_{ON,OFF,SUSPEND})
could be directly called, this proved too difficult as it would imply
the duplication of all the logic used by the kernel to allow for a
clean shutdown/bringup/suspend of the CPU (the deepest sleep states
implying potentially the shutdown of the CPU).
Note that this file cannot be compiled as a loadable module, since it
uses a number of non-exported identifiers (essentially for
PSCI-specific checks and direct use of cpuidle) and relies on the
absence of userspace to avoid races when calling hotplug and cpuidle
functions.
For now at least, CONFIG_PSCI_CHECKER is mutually exclusive with
CONFIG_TORTURE_TEST, because torture tests may also use hotplug and
cause false positives in the hotplug tests.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> [torture test config]
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
[lpieralisi: added cpuidle locking, reworded commit log/kconfig entry]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Inter-VM communication (IVC) is a communication protocol which is
designed for interprocessor communication (IPC) or the communication
between the hypervisor and the virtual machine with a guest OS.
Message channels are used to communicate between processors. They are
backed by DRAM or SRAM, so care must be taken to maintain coherence of
data.
The IVC library maintains memory-based descriptors for the transmission
and reception channels as well as the data coherence of the counter and
payload. Clients, such as the driver for the BPMP firmware, can use the
library to exchange messages with remote processors.
Based on work by Peter Newman <pnewman@nvidia.com> and Joseph Lo
<josephl@nvidia.com>.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Texas Instrument's System Control Interface (TI-SCI) Message Protocol
is used in Texas Instrument's System on Chip (SoC) such as those
in keystone family K2G SoC to communicate between various compute
processors with a central system controller entity.
TI-SCI message protocol provides support for management of various
hardware entities within the SoC. Add support driver to allow
communication with system controller entity within the SoC using the
mailbox client.
We introduce the basic registration and query capability for the
driver protocol as part of this change. Subsequent patches add in
functionality specific to the TI-SCI features.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Introduce a driver to provide calls into secure monitor mode.
In the Amlogic SoCs these calls are used for multiple reasons: access to
NVMEM, set USB boot, enable JTAG, etc...
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
[khilman: add in SZ_4K cleanup]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This patch hooks up the support for device power domain provided by
SCPI using the Linux generic power domain infrastructure.
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Jon Medhurst <tixy@linaro.org>
Reviewed-by: Jon Medhurst <tixy@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Make fw_cfg entries of type "file" available via sysfs. Entries
are listed under /sys/firmware/qemu_fw_cfg/by_key, in folders
named after each entry's selector key. Filename, selector value,
and size read-only attributes are included for each entry. Also,
a "raw" attribute allows retrieval of the full binary content of
each entry.
The fw_cfg device can be instantiated automatically from ACPI or
the Device Tree, or manually by using a kernel module (or command
line) parameter, with a syntax outlined in the documentation file.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This pull request contains the Raspberry Pi firmware driver, for communicating
with the VPU which has exclusive control of some of the peripherals.
Eric adds the actual firmware driver and Alexander fixes the header file which
was missing include guards.
* tag 'arm/soc/for-4.4/rpi-drivers' of https://github.com/Broadcom/stblinux:
ARM: bcm2835: add mutual inclusion protection
ARM: bcm2835: Add the Raspberry Pi firmware driver
Signed-off-by: Olof Johansson <olof@lixom.net>
* Implement id_table driver matching in SMD
* Avoid NULL pointer exception on remove of SMEM
* Reorder SMEM/SMD configs
* Make qcom_smem_get() return a pointer
* Handle big endian CPUs correctly in SMEM
* Represent SMD channel layout in structures
* Use __iowrite32_copy() in SMD
* Remove use of VLAIs in SMD
* Handle big endian CPUs correctly in SMD/RPM
* Handle big endian CPUs corretly in SMD
* Reject sending SMD packets that are too large
* Fix endianness issue in SCM __qcom_scm_is_call_available
* Add missing prototype for qcom_scm_is_available()
* Correct SMEM items for upper channels
* Use architecture level to build SCM correctly
* Delete unneeded of_node_put in SMD
* Correct active/slep state flagging in SMD/RPM
* Move RPM message ram out of SMEM DT node
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=hprv
-----END PGP SIGNATURE-----
Merge tag 'qcom-soc-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm into next/drivers
Pull "Qualcomm ARM Based SoC Updates for 4.4" from Andy Gross:
* Implement id_table driver matching in SMD
* Avoid NULL pointer exception on remove of SMEM
* Reorder SMEM/SMD configs
* Make qcom_smem_get() return a pointer
* Handle big endian CPUs correctly in SMEM
* Represent SMD channel layout in structures
* Use __iowrite32_copy() in SMD
* Remove use of VLAIs in SMD
* Handle big endian CPUs correctly in SMD/RPM
* Handle big endian CPUs corretly in SMD
* Reject sending SMD packets that are too large
* Fix endianness issue in SCM __qcom_scm_is_call_available
* Add missing prototype for qcom_scm_is_available()
* Correct SMEM items for upper channels
* Use architecture level to build SCM correctly
* Delete unneeded of_node_put in SMD
* Correct active/slep state flagging in SMD/RPM
* Move RPM message ram out of SMEM DT node
* tag 'qcom-soc-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm:
soc: qcom: smem: Move RPM message ram out of smem DT node
soc: qcom: smd-rpm: Correct the active vs sleep state flagging
soc: qcom: smd: delete unneeded of_node_put
firmware: qcom-scm: build for correct architecture level
soc: qcom: smd: Correct SMEM items for upper channels
qcom-scm: add missing prototype for qcom_scm_is_available()
qcom-scm: fix endianess issue in __qcom_scm_is_call_available
soc: qcom: smd: Reject send of too big packets
soc: qcom: smd: Handle big endian CPUs
soc: qcom: smd_rpm: Handle big endian CPUs
soc: qcom: smd: Remove use of VLAIS
soc: qcom: smd: Use __iowrite32_copy() instead of open-coding it
soc: qcom: smd: Represent channel layout in structures
soc: qcom: smem: Handle big endian CPUs
soc: qcom: Make qcom_smem_get() return a pointer
soc: qcom: Reorder SMEM/SMD configs
soc: qcom: smem: Avoid NULL pointer exception on remove
soc: qcom: smd: Implement id_table driver matching
This gives us a function for making mailbox property channel requests
of the firmware, which is most notable in that it will let us get and
set clock rates.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
The ".arch_extension sec" directive is only available on ARMv6 or higher,
so if we enable the SCM driver while building a kernel for an older CPU,
we get a build error:
/tmp/ccUyhMOY.s:130: Error: selected processor does not support ARM mode `smc #0'
/tmp/ccUyhMOY.s:216: Error: selected processor does not support ARM mode `smc #0'
/tmp/ccUyhMOY.s:373: Error: selected processor does not support ARM mode `smc #0'
make[4]: *** [drivers/firmware/qcom_scm-32.o] Error 1
This changes the Makefile so we pass the ARMv7 architecture level both
for the check and for the actual compilation of the scm driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Gross <agross@codeaurora.org>
It adds support for the following features provided by SCP firmware
using different subsystems in Linux:
1. SCPI mailbox protocol driver which using mailbox framework
2. Clocks provided by SCP using clock framework
3. CPU DVFS(cpufreq) using existing arm-big-little driver
4. SCPI based sensors including temperature sensors
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJWF7ifAAoJEABBurwxfuKYAfMP/34ka/n4+U/aPQXzStNIwr3v
Nme9WSf3mUPv26MstRDrWRYi1G2WLOTlc196MpdIt6m6QLOjxzEl3tSq5ILrj7yN
KoLojtISmu/pbhVcJN5fllxgpcJzufLoEWBa5T/Y/4GoIhh1NCYa82QpNgzPmsMd
rPCkYHqwT6I3sIS+/mbDkGA/QnwJ2qtJ8sp3+fL+dyJbI7Aa1zJZP6ectPsxK22+
HFoFTY45rdFv/ojZZFZL8E/gcblYwRWKzIgwdASHuDXxIhd/IPwjrex2Iyv75AQK
zusRQ5Xv82GaYWHVa9GXmZqXkTsvBg4AJwc4Uq2JdB0qOi2a4tc8PkK7Ts5YdHgS
YVGxbY1POtMBi2bJUjsviMY7dGR3I+iEXJTYnbPnkVa+GTv8/FViVmOOLQnnBF4R
fN5FN0vfuL6zaQzOPYLGx3SuEHix3ko2DCAcMg6idIxuBHArlJuS7XKECWdHuc0+
+qn6Iqf8YSKIZ1zrWMggqY/sXuxjtABUBXe3jP3iTKQh8h+9SLfN3wgQM4GFJJcB
gNfvk3Hl5aPFy/7gsgSDlaYbhGKPwTup+R8Fqd6nSBQO+rpRXvQQftwigYQiIEcE
IiOS3BntVQWjoVr9WIifguf6rHG1ZoSMTHdtVVEaqsspT/OGJyq/ynEFJYSFqcqX
NRPdQJNuoXGolGhyoWxD
=9u+p
-----END PGP SIGNATURE-----
Merge tag 'arm-scpi-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers
Merge "ARM System Control and Power Interface(SCPI) support" from Sudeep Holla
It adds support for the following features provided by SCP firmware
using different subsystems in Linux:
1. SCPI mailbox protocol driver which using mailbox framework
2. Clocks provided by SCP using clock framework
3. CPU DVFS(cpufreq) using existing arm-big-little driver
4. SCPI based sensors including temperature sensors
* tag 'arm-scpi-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
hwmon: Support thermal zones registration for SCP temperature sensors
hwmon: Support sensors exported via ARM SCP interface
firmware: arm_scpi: Extend to support sensors
Documentation: add DT bindings for ARM SCPI sensors
cpufreq: arm_big_little: add SCPI interface driver
clk: scpi: add support for cpufreq virtual device
clk: add support for clocks provided by SCP(System Control Processor)
firmware: add support for ARM System Control and Power Interface(SCPI) protocol
Documentation: add DT binding for ARM System Control and Power Interface(SCPI) protocol
This patch adds support for System Control and Power Interface (SCPI)
Message Protocol used between the Application Cores(AP) and the System
Control Processor(SCP). The MHU peripheral provides a mechanism for
inter-processor communication between SCP's M3 processor and AP.
SCP offers control and management of the core/cluster power states,
various power domain DVFS including the core/cluster, certain system
clocks configuration, thermal sensors and many others.
This protocol driver provides interface for all the client drivers using
SCPI to make use of the features offered by the SCP.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Jon Medhurst (Tixy) <tixy@linaro.org>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
This patch adds stubs for the SCM functions exposed in the QCOM SCM API.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
To enable sharing with arm, move the core PSCI framework code to
drivers/firmware. This results in a minor gain in lines of code, but
this will quickly be amortised by the removal of code currently
duplicated in arch/arm.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Pull MIPS updates from Ralf Baechle:
- Improvements to the tlb_dump code
- KVM fixes
- Add support for appended DTB
- Minor improvements to the R12000 support
- Minor improvements to the R12000 support
- Various platform improvments for BCM47xx
- The usual pile of minor cleanups
- A number of BPF fixes and improvments
- Some improvments to the support for R3000 and DECstations
- Some improvments to the ATH79 platform support
- A major patchset for the JZ4740 SOC adding support for the CI20 platform
- Add support for the Pistachio SOC
- Minor BMIPS/BCM63xx platform support improvments.
- Avoid "SYNC 0" as memory barrier when unlocking spinlocks
- Add support for the XWR-1750 board.
- Paul's __cpuinit/__cpuinitdata cleanups.
- New Malta CPU board support large memory so enable ZONE_DMA32.
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits)
MIPS: spinlock: Adjust arch_spin_lock back-off time
MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA
MIPS: BCM47xx: Simplify handling SPROM revisions
MIPS: Cobalt Don't use module_init in non-modular MTD registration.
MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/
MIPS: use for_each_sg()
MIPS: BCM47xx: Don't select BCMA_HOST_PCI
MIPS: BCM47xx: Add helper variable for storing NVRAM length
MIPS: IRQ/IP27: Move IRQ allocation API to platform code.
MIPS: Replace smp_mb with release barrier function in unlocks.
MIPS: i8259: DT support
MIPS: Malta: Basic DT plumbing
MIPS: include errno.h for ENODEV in mips-cm.h
MIPS: Define GCR_GIC_STATUS register fields
MIPS: BPF: Introduce BPF ASM helpers
MIPS: BPF: Use BPF register names to describe the ABI
MIPS: BPF: Move register definition to the BPF header
MIPS: net: BPF: Replace RSIZE with SZREG
MIPS: BPF: Free up some callee-saved registers
MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers
...
After Broadcom switched from MIPS to ARM for their home routers we need
to have NVRAM driver in some common place (not arch/mips/). As explained
in Kconfig, this driver is responsible for parsing SoC configuration
data that is passed to the kernel in flash from the bootloader firmware
called "CFE".
We were thinking about putting it in bus directory, however there are
two possible buses for MIPS: drivers/ssb/ and drivers/bcma/. So this
won't fit there and this is why I would like to move this driver to the
drivers/firmware/.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mike Waychison <mikew@google.com>
Cc: Roy Franz <roy.franz@linaro.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Patchwork: https://patchwork.linux-mips.org/patch/10544/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Split out the 32-bit SCM implementation into its own file to prep for
supporting a 64-bit/ARM64 implementation as well. We create a simple shim
to ensure both versions conform to the same interface.
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Architectural changes in the ARM Linux kernel tree mandate the eventual
removal of the mach-* directories. Move the scm driver to
drivers/firmware and the scm header to include/linux to support that
removal.
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Commit 7ea6c6c1 ("Move cper.c from drivers/acpi/apei to
drivers/firmware/efi") results in CONFIG_EFI being enabled even
when the user doesn't want this. Since ACPI APEI used to build
fine without UEFI (and as far as I know also has no functional
depency on it), at least in that case using a reverse dependency
is wrong (and a straight one isn't needed).
Whether the same is true for ACPI_EXTLOG I don't know - if there
is a functional dependency, it should depend on EFI rather than
selecting it. It certainly has (currently) no build dependency.
Adjust Kconfig and build logic so that the bad dependency gets
avoided.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/52AF1EBC020000780010DBF9@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This registers /sys/firmware/efi/{,systab,efivars/} whenever EFI is enabled
and the system is booted with EFI.
This allows
*) userspace to check for the existence of /sys/firmware/efi as a way
to determine whether or it is running on an EFI system.
*) 'mount -t efivarfs none /sys/firmware/efi/efivars' without manually
loading any modules.
[ Also, move the efivar API into vars.c and unconditionally compile it.
This allows us to move efivars.c, which now only contains the sysfs
variable code, into the firmware/efi directory. Note that the efivars.c
filename is kept to maintain backwards compatability with the old
efivars.ko module. With this patch it is now possible for efivarfs
to be built without CONFIG_EFI_VARS - Matt ]
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Chun-Yi Lee <jlee@suse.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Tobias Powalowski <tpowa@archlinux.org>
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
efivars.c has grown far too large and needs to be divided up. Create a
new directory and move the persistence storage code to efi-pstore.c now
that it uses the new efivar API. This helps us to greatly reduce the
size of efivars.c and paves the way for moving other code out of
efivars.c.
Note that because CONFIG_EFI_VARS can be built as a module efi-pstore
must also include support for building as a module.
Reviewed-by: Tom Gundersen <teg@jklm.no>
Tested-by: Tom Gundersen <teg@jklm.no>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
It has been pointed out previously, that the firmware subsystem is not the right
place for the SigmaDSP firmware loader. Furthermore the SigmaDSP is currently
only used in audio products and we are aiming for better integration into the
ASoC framework in the future, with support for ALSA controls for firmware
parameters and support dynamic power management as well. So the natural choice
for the SigmaDSP firmware loader is the ASoC subsystem.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
In order to keep Google's firmware drivers organized amongst themselves,
all Google firmware drivers are gated on CONFIG_GOOGLE_FIRMWARE=y, which
defaults to 'n' in the kernel build.
Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The "gsmi" driver bridges userland with firmware specific routines for
accessing hardware.
Currently, this driver only supports NVRAM and eventlog information.
Deprecated functions have been removed from the driver, though their
op-codes are left in place so that they are not re-used.
This driver works by trampolining into the firmware via the smi_command
outlined in the FADT table. Three protocols are used due to various
limitations over time, but all are included herein.
This driver should only ever load on Google boards, identified by either
a "Google, Inc." board vendor string in DMI, or "GOOGLE" in the OEM
strings of the FADT ACPI table. This logic happens in
gsmi_system_valid().
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Aaron Durbin <adurbin@google.com>
Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Analog Devices' SigmaStudio can produce firmware blobs for devices with
these DSPs embedded (like some audio codecs). Allow these device drivers
to easily parse and load them.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce a new module "dmi-sysfs" that exports the broken out entries
of the DMI table through sysfs.
Entries are enumerated via dmi_walk() on module load, and are populated
as kobjects rooted at /sys/firmware/dmi/entries.
Entries are named "<type>-<instance>", where:
<type> : is the type of the entry, and
<instance> : is the ordinal count within the DMI table of that
entry type. This instance is used in lieu the DMI
entry's handle as no assurances are made by the kernel
that handles are unique.
All entries export the following attributes:
length : The length of the formatted portion of the entry
handle : The handle given to this entry by the firmware
raw : The raw bytes of the entire entry, including the
formatted portion, the unformatted (strings) portion,
and the two terminating nul characters.
type : The DMI entry type
instance : The ordinal instance of this entry given its type.
position : The position ordinal of the entry within the table in
its entirety.
Entries in dmi-sysfs are kobject backed members called "struct
dmi_sysfs_entry" and belong to dmi_kset. They are threaded through
entry_list (protected by entry_list_lock) so that we can find them at
cleanup time.
Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
iscsi_boot_sysfs does not depend on firmware. Any iscsi driver
can use it. This patch moves iscsi_boot_sysfs to the scsi
dir, so that it can be used on any arch with any driver.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Acked-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Not all iscsi drivers support ibft. For drivers like be2iscsi
that do not but are bootable through a vendor firmware specific
format/process this patch moves the sysfs interface from the ibft code
to a lib module. This then allows userspace tools to search for iscsi boot
info in a common place and in a common format.
ibft iscsi boot info is exported in the same place as it was
before: /sys/firmware/ibft.
vendor/fw boot info gets export in /sys/firmware/iscsi_bootX, where X is the
scsi host number of the HBA. Underneath these parent dirs, the
target, ethernet, and initiator dirs are the same as they were before.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
