Extra Boot Config (XBC) allows admin to pass a tree-structured
boot configuration file when boot up the kernel. This extends
the kernel command line in an efficient way.
Boot config will contain some key-value commands, e.g.
key.word = value1
another.key.word = value2
It can fold same keys with braces, also you can write array
data. For example,
key {
word1 {
setting1 = data
setting2
}
word2.array = "val1", "val2"
}
User can access these key-value pair and tree structure via
SKC APIs.
Link: http://lkml.kernel.org/r/157867221257.17873.1775090991929862549.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As there's two struct ring_buffers in the kernel, it causes some confusion.
The other one being the perf ring buffer. It was agreed upon that as neither
of the ring buffers are generic enough to be used globally, they should be
renamed as:
perf's ring_buffer -> perf_buffer
ftrace's ring_buffer -> trace_buffer
This implements the changes to the ring buffer that ftrace uses.
Link: https://lore.kernel.org/r/20191213140531.116b3200@gandalf.local.home
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As we are working to remove the generic "ring_buffer" name that is used by
both tracing and perf, the ring_buffer name for tracing will be renamed to
trace_buffer, and perf's ring buffer will be renamed to perf_buffer.
As there already exists a trace_buffer that is used by the trace_arrays, it
needs to be first renamed to array_buffer.
Link: https://lore.kernel.org/r/20191213153553.GE20583@krava
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
eBPF requires needing to know the size of the perf ring buffer structure.
But it unfortunately has the same name as the generic ring buffer used by
tracing and oprofile. To make it less ambiguous, rename the perf ring buffer
structure to "perf_buffer".
As other parts of the ring buffer code has "perf_" as the prefix, it only
makes sense to give the ring buffer the "perf_" prefix as well.
Link: https://lore.kernel.org/r/20191213153553.GE20583@krava
Acked-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Two fixes for RISC-V:
- Clear FP registers during boot when FP support is present, rather than
when they aren't present
- Move the header files associated with the SiFive L2 cache controller
to drivers/soc (where the code was recently moved)
-----BEGIN PGP SIGNATURE-----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=qvPe
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Two fixes for RISC-V:
- Clear FP registers during boot when FP support is present, rather
than when they aren't present
- Move the header files associated with the SiFive L2 cache
controller to drivers/soc (where the code was recently moved)"
* tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup obvious bug for fp-regs reset
riscv: move sifive_l2_cache.h to include/soc
CSR_MISA is defined in Privileged Architectures' spec: 3.1.1 Machine
ISA Register misa. Every bit:1 indicate a feature, so we should beqz
reset_done when there is no F/D bit in csr_misa register.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
[paul.walmsley@sifive.com: fix typo in commit message]
Fixes: 9e80635619 ("riscv: clear the instruction cache and all registers when booting")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The commit 9209fb5189 ("riscv: move sifive_l2_cache.c to drivers/soc")
moves the sifive L2 cache driver to driver/soc. It did not move the
header file along with the driver. Therefore this patch moves the header
file to driver/soc
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: updated to fix the include guard]
Fixes: 9209fb5189 ("riscv: move sifive_l2_cache.c to drivers/soc")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Including:
- Two fixes for VT-d and generic IOMMU code to fix teardown on
error handling code paths.
- Patch for the Intel VT-d driver to fix handling of non-PCI
devices
- Fix W=1 compile warning in dma-iommu code
-----BEGIN PGP SIGNATURE-----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=rTxu
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Two fixes for VT-d and generic IOMMU code to fix teardown on error
handling code paths.
- Patch for the Intel VT-d driver to fix handling of non-PCI devices
- Fix W=1 compile warning in dma-iommu code
* tag 'iommu-fixes-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/dma: fix variable 'cookie' set but not used
iommu/vt-d: Unlink device if failed to add to group
iommu: Remove device link to group on failure
iommu/vt-d: Fix adding non-PCI devices to Intel IOMMU
Pull i2c fixes from Wolfram Sang:
"Two driver bugfixes, a documentation fix, and a removal of a spec
violation for the bus recovery algorithm in the core"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: fix bus recovery stop mode timing
i2c: bcm2835: Store pointer to bus clock
dt-bindings: i2c: at91: fix i2c-sda-hold-time-ns documentation for sam9x60
i2c: at91: fix clk_offset for sam9x60
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXhhtDQAKCRCRxhvAZXjc
orQ3AQD7H2ovZbPIpWbwOnRIExBF4O8gPDfFc/J/RweZx40v/AD/QwfFnq0TpmUc
UfS4zzLxJ4K+L4RYWId5v8MFHGIu8QQ=
=LmmJ
-----END PGP SIGNATURE-----
Merge tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fixes from Christian Brauner:
"This contains a series of patches to fix CLONE_SETTLS when used with
clone3().
The clone3() syscall passes the tls argument through struct clone_args
instead of a register. This means, all architectures that do not
implement copy_thread_tls() but still support CLONE_SETTLS via
copy_thread() expecting the tls to be located in a register argument
based on clone() are currently unfortunately broken. Their tls value
will be garbage.
The patch series fixes this on all architectures that currently define
__ARCH_WANT_SYS_CLONE3. It also adds a compile-time check to ensure
that any architecture that enables clone3() in the future is forced to
also implement copy_thread_tls().
My ultimate goal is to get rid of the copy_thread()/copy_thread_tls()
split and just have copy_thread_tls() at some point in the not too
distant future (Maybe even renaming copy_thread_tls() back to simply
copy_thread() once the old function is ripped from all arches). This
is dependent now on all arches supporting clone3().
While all relevant arches do that now there are still four missing:
ia64, m68k, sh and sparc. They have the system call reserved, but not
implemented. Once they all implement clone3() we can get rid of
ARCH_WANT_SYS_CLONE3 and HAVE_COPY_THREAD_TLS.
This series also includes a minor fix for the arm64 uapi headers which
caused __NR_clone3 to be missing from the exported user headers.
Unfortunately the series came in a little late especially given that
it touches a range of architectures. Due to the holidays not all arch
maintainers responded in time probably due to their backlog. Will and
Arnd have thankfully acked the arm specific changes.
Given that the changes are straightforward and rather minimal combined
with the fact the that clone3() with CLONE_SETTLS is broken I decided
to send them post rc3 nonetheless"
* tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
um: Implement copy_thread_tls
clone3: ensure copy_thread_tls is implemented
xtensa: Implement copy_thread_tls
riscv: Implement copy_thread_tls
parisc: Implement copy_thread_tls
arm: Implement copy_thread_tls
arm64: Implement copy_thread_tls
arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers
Pull HID fix from Jiri Kosina:
"A regression fix for EPOLLOUT handling in hidraw and uhid"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: hidraw, uhid: Always report EPOLLOUT
Here are a number of USB and PHY driver fixes for 5.5-rc6
Nothing all that unusual, just the a bunch of small fixes for a lot of
different reported issues. The PHY driver fixes are in here as they
interacted with the usb drivers.
Full details of the patches are in the shortlog, and all of these have
been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXhjpVA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylDcgCeL+XYo/Qf/mN3du3RLYzE8lPxh3UAn3DXqiaj
XwZUHkevbaQfbRdGD9iS
=URSF
-----END PGP SIGNATURE-----
Merge tag 'usb-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH:
"Here are a number of USB and PHY driver fixes for 5.5-rc6
Nothing all that unusual, just the a bunch of small fixes for a lot of
different reported issues. The PHY driver fixes are in here as they
interacted with the usb drivers.
Full details of the patches are in the shortlog, and all of these have
been in linux-next with no reported issues"
* tag 'usb-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
usb: missing parentheses in USE_NEW_SCHEME
usb: ohci-da8xx: ensure error return on variable error is set
usb: musb: Disable pullup at init
usb: musb: fix idling for suspend after disconnect interrupt
usb: typec: ucsi: Fix the notification bit offsets
USB: Fix: Don't skip endpoint descriptors with maxpacket=0
USB-PD tcpm: bad warning+size, PPS adapters
phy/rockchip: inno-hdmi: round clock rate down to closest 1000 Hz
usb: chipidea: host: Disable port power only if previously enabled
usb: cdns3: should not use the same dev_id for shared interrupt handler
usb: dwc3: gadget: Fix request complete check
usb: musb: dma: Correct parameter passed to IRQ handler
usb: musb: jz4740: Silence error if code is -EPROBE_DEFER
usb: udc: tegra: select USB_ROLE_SWITCH
USB: core: fix check for duplicate endpoints
phy: cpcap-usb: Drop extra write to usb2 register
phy: cpcap-usb: Improve host vs docked mode detection
phy: cpcap-usb: Prevent USB line glitches from waking up modem
phy: mapphone-mdm6600: Fix uninitialized status value regression
phy: cpcap-usb: Fix flakey host idling and enumerating of devices
...
Here is a single fix, for the chrdev core, for 5.5-rc6
There's been a long-standing race condition triggered by syzbot, and
occasionally real people, in the chrdev open() path. Will finally took
the time to track it down and fix it for real before the holidays.
Here's that one patch, it's been in linux-next for a while with no
reported issues and it does fix the reported problem.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXhjcRA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykIyQCfcrNOyyFktEj7/qiVJrMLbzVWoWYAoMHtNQcG
3IYmNNJ+eXXJEiOgeZ4J
=J0bS
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is a single fix, for the chrdev core, for 5.5-rc6
There's been a long-standing race condition triggered by syzbot, and
occasionally real people, in the chrdev open() path. Will finally took
the time to track it down and fix it for real before the holidays.
Here's that one patch, it's been in linux-next for a while with no
reported issues and it does fix the reported problem"
* tag 'char-misc-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
chardev: Avoid potential use-after-free in 'chrdev_open()'
Here are some small staging driver fixes for 5.5-rc6.
Nothing major here, just some small fixes for a comedi driver, the
vt6656 driver, and a new device id for the rtl8188eu driver.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXhjdDg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylG4wCfaB05qwUQnBHeHQC1vl8ZLt2eH7oAmwSoLT9h
J43QQPrLqR/KVVVCt0/J
=6GNV
-----END PGP SIGNATURE-----
Merge tag 'staging-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are some small staging driver fixes for 5.5-rc6.
Nothing major here, just some small fixes for a comedi driver, the
vt6656 driver, and a new device id for the rtl8188eu driver.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21
staging: comedi: adv_pci1710: fix AI channels 16-31 for PCI-1713
staging: vt6656: set usb_set_intfdata on driver fail.
staging: vt6656: remove bool from vnt_radio_power_on ret
staging: vt6656: limit reg output to block size
staging: vt6656: correct return of vnt_init_registers.
staging: vt6656: Fix non zero logical return of, usb_control_msg
Here are two tty/serial driver fixes for 5.5-rc6.
The first fixes a much much reported issue with a previous tty port link
patch that is in your tree, and the second fixes a problem where the
serdev driver would claim ACPI devices that it shouldn't be claiming.
Both have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXhjdnA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynu9wCeK2+UkGRHnRu36Gnct0GitHsfYucAn35UwsfR
+R9QXskGEDl5NdWkPG77
=BTqO
-----END PGP SIGNATURE-----
Merge tag 'tty-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are two tty/serial driver fixes for 5.5-rc6.
The first fixes a much much reported issue with a previous tty port
link patch that is in your tree, and the second fixes a problem where
the serdev driver would claim ACPI devices that it shouldn't be
claiming.
Both have been in linux-next for a while with no reported issues"
* tag 'tty-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serdev: Don't claim unsupported ACPI serial devices
tty: always relink the port
-----BEGIN PGP SIGNATURE-----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=1bsG
-----END PGP SIGNATURE-----
Merge tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should go into this round.
This pull request contains two NVMe fixes via Keith, removal of a dead
function, and a fix for the bio op for read truncates (Ming)"
* tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-block:
nvmet: fix per feat data len for get_feature
nvme: Translate more status codes to blk_status_t
fs: move guard_bio_eod() after bio_set_op_attrs
block: remove unused mp_bvec_last_segment
-----BEGIN PGP SIGNATURE-----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=TzX1
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.5-2020-01-10' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Single fix for this series, fixing a regression with the short read
handling.
This just removes it, as it cannot safely be done for all cases"
* tag 'io_uring-5.5-2020-01-10' of git://git.kernel.dk/linux-block:
io_uring: remove punt of short reads to async context
* sm_ftl: Fix NULL pointer warning.
Raw NAND:
* Cadence: fix compile testing.
* STM32: Avoid locking.
Onenand:
* Fix several sparse/build warnings.
SPI-NOR:
* Add a flag to fix interaction with Micron parts.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl4YipIACgkQJWrqGEe9
VoTr/Af9GDYEaD5ZnYeOwTSs43Cd62K7wzPar9tE20xu5VVmPXmyIgSmxyoPXpjh
O89xxahrG4sD0vokSWstjgZVTzBEu2DHkeOsjD6j7buXlv5LN8o4dAqw7k6+Hle5
T5qHZogcO2HK+4OijIP6xJ6hQMGz4YxZvhw34zEqdPYivxTK8X3EDEuQDns9bMUr
nPOjCYhOoR//iIRUA+l78VEnA2unnGGhaQhBxGm43xwqYLrOMsmz859pjbt1DGob
B3w2MlJ33ADBhA3/7PswAb8Otz6yPT8eq/8a8Pl+t9SZIwgZGBnjv/kzkBaZQ0r7
UCe2aVD97l5OkIBoIfPA+thbavrHwQ==
=TapA
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"MTD:
- sm_ftl: Fix NULL pointer warning.
Raw NAND:
- Cadence: fix compile testing.
- STM32: Avoid locking.
Onenand:
- Fix several sparse/build warnings.
SPI-NOR:
- Add a flag to fix interaction with Micron parts"
* tag 'mtd/fixes-for-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spi-nor: Fix the writing of the Status Register on micron flashes
mtd: sm_ftl: fix NULL pointer warning
mtd: onenand: omap2: Pass correct flags for prep_dma_memcpy
mtd: onenand: samsung: Fix iomem access with regular memcpy
mtd: onenand: omap2: Fix errors in style
mtd: cadence: Fix cast to pointer from integer of different size warning
mtd: rawnand: stm32_fmc2: avoid to lock the CPU bus
A few piled ASoC fixes and usual HD-audio and USB-audio fixups.
Some of them are for ASoC core, but rather about error-handling.
-----BEGIN PGP SIGNATURE-----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=/0Br
-----END PGP SIGNATURE-----
Merge tag 'sound-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few piled ASoC fixes and usual HD-audio and USB-audio fixups. Some
of them are for ASoC core error-handling"
* tag 'sound-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: enable regmap internal locking
ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen
ALSA: hda/realtek - Set EAPD control to default for ALC222
ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5
ALSA: hda/realtek - Add new codec supported for ALCS1200A
ASoC: Intel: boards: Fix compile-testing RT1011/RT5682
ASoC: SOF: imx8: Fix dsp_box offset
ASoC: topology: Prevent use-after-free in snd_soc_get_pcm_runtime()
ASoC: fsl_audmix: add missed pm_runtime_disable
ASoC: stm32: spdifrx: fix input pin state management
ASoC: stm32: spdifrx: fix race condition in irq handler
ASoC: stm32: spdifrx: fix inconsistent lock state
ASoC: core: Fix access to uninitialized list heads
ASoC: soc-core: Set dpcm_playback / dpcm_capture
ASoC: SOF: imx8: fix memory allocation failure check on priv->pd_dev
ASoC: SOF: Intel: hda: hda-dai: fix oops on hda_link .hw_free
ASoC: SOF: fix fault at driver unload after failed probe
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRuKdf4M92Gi9vqihve5qtOL396pgUCXhQyogAKCRDe5qtOL396
puHcAQC2B5eXcxXeEEdIDsK6xMJMIkikyTUTiBeBPVesOd3QQQD/XuD65VfOLCbO
ZLEzpsEyX9zY194Ga8u0ovyRovjW6gw=
=Xoh0
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal fix from Daniel Lezcano:
"Fix backward compatibility with old DTBs on QCOM tsens (Amit
Kucheria)"
* tag 'thermal-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
drivers: thermal: tsens: Work with old DTBs
Prevent the cpufreq-dt driver from probing Tegra20/30 (Dmitry Osipenko)
and prevent the Intel RAPL power capping driver from crashing during
CPU initialization due to a NULL pointer dereference if the processor
model in use is not known to it (Harry Pan).
-----BEGIN PGP SIGNATURE-----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=ukHp
-----END PGP SIGNATURE-----
Merge tag 'pm-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Prevent the cpufreq-dt driver from probing Tegra20/30 (Dmitry
Osipenko) and prevent the Intel RAPL power capping driver from
crashing during CPU initialization due to a NULL pointer dereference
if the processor model in use is not known to it (Harry Pan)"
* tag 'pm-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online()
cpufreq: dt-platdev: Blacklist NVIDIA Tegra20 and Tegra30 SoCs
The existing implementation for the get_feature admin-cmd does not
use per-feature data len. This patch introduces a new helper function
nvmet_feat_data_len(), which is used to calculate per feature data len.
Right now we only set data len for fid 0x81 (NVME_FEAT_HOST_ID).
Fixes: commit e9061c3978 ("nvmet: Remove the data_len field from the nvmet_req struct")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Amit Engel <amit.engel@dell.com>
[endiness, naming, and kernel style fixes]
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Decode interrupted command and not ready namespace nvme status codes to
BLK_STS_TARGET. These are not generic IO errors and should use a non-path
specific error so that it can use the non-failover retry path.
Reported-by: John Meneghini <John.Meneghini@netapp.com>
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
hidraw and uhid device nodes are always available for writing so we should
always report EPOLLOUT and EPOLLWRNORM bits, not only in the cases when
there is nothing to read.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: be54e7461f ("HID: uhid: Fix returning EPOLLOUT from uhid_char_poll")
Fixes: 9f3b61dc1d ("HID: hidraw: Fix returning EPOLLOUT from hidraw_poll")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- Fix label allocation lifetime/visibility to avoid further mistakes
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAl4YAM8WHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJl9mD/9il1pBZmLTQFVzfLeVnDemQ1t1
zhPywuR/FzE6KXX4kqaRJZ2ttLsHFaGqttbegQ5Jh8g5SdHZgMWRIz9y9Mb/re4g
5ny19VH4dvJHY6CYQxl3SlL+uSx29dNQOC4XGRtVwLrs6XeCIoWhXw1KI6ahiuVW
AK1lelPlLIdVOLrvDn3qHy6iQBXgEA0PSosxUEjxC43ekoIRwKwsMKCeT3awHrOY
uTamIU8vXwqCl+eFsgoQBoq8dgBvNI121DbKB2rToC2Pb3cE84Ez2Ul7hrqDQqzo
0wLPYJhvzMDqCaRwc5a42PqYFmRxSZrNHVbAnA9n/gEFPluJTklsq8fOEkXYml16
BKiC96PcKYfJZdEePbNx3tQVtXYj/mlncLKb8FxIlybyC+P92XGlHWDkrXyva8uY
6XyTyGpkEN1zwZnA+R6otvaOX8+I5XuX4vsRRlTaDd+1Y6SY7HxvMjxFuTko0yfY
y/X0rfrhzvtrXUCoC+bkaA73EwaSXpie+8goFWQz9Erjpl7o0lH4lCIqm7J0hynM
0kmlusSEfqNQ8HBnbP25BVjW4Ws/ASrr5yGDNTigsaYeCdHkwYy+Ses50I9gMWuB
oNz7jUblC0rPlO1geBQTFpec2u+9sS7Y+xhYhh+h8GLwCX09zOB8gUTE+GBgVhsY
ptjh+yD7ybBiXrX8jQ==
=biFc
-----END PGP SIGNATURE-----
Merge tag 'pstore-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore fix from Kees Cook:
"Cengiz Can forwarded a Coverity report about more problems with a rare
pstore initialization error path, so the allocation lifetime was
rearranged to avoid needing to share the kfree() responsibilities
between caller and callee"
* tag 'pstore-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/ram: Regularize prz label allocation lifetime
core:
- mst Fix NO_STOP_BIT bit offset (Wayne)
fb_helper:
- fb_helper: Fix bits_per_pixel param set behavior to round up (Geert)
sun4i:
- Fix RGB_DIV clock min divider on old hardware (Chen-Yu)
amdgpu:
- Stability fix for raven
- Reduce pixel encoding to if max clock is exceeded on HDMI
to allow additional high res modes
- enable DRIVER_SYNCOBJ_TIMELINE for amdgpu
i915:
- Fix GitLab issue #446 causing GPU hangs: Do not restore invalid RS state
- Fix GitLab issue #846: Restore coarse power gating that was disabled
by initial RC66 context corruption security fixes.
- Revert f6ec948309 ("drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms")
to avoid screen flicker
- Fix to fill in unitialized uabi_instance in virtual engine uAPI
- Add two missing W/As for ICL and EHL
-----BEGIN PGP SIGNATURE-----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=YPe6
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2020-01-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Pre-LCA pull request I'm not sure how things will look next week,
myself and Daniel are at LCA and I'm speaking quite late, so if I get
my talk finished I'll probably process fixes.
This week has a bunch of i915 fixes, some amdgpu fixes, one sun4i, one
core MST, and one core fb_helper fix. More details below:
core:
- mst Fix NO_STOP_BIT bit offset (Wayne)
fb_helper:
- fb_helper: Fix bits_per_pixel param set behavior to round up
(Geert)
sun4i:
- Fix RGB_DIV clock min divider on old hardware (Chen-Yu)
amdgpu:
- Stability fix for raven
- Reduce pixel encoding to if max clock is exceeded on HDMI to allow
additional high res modes
- enable DRIVER_SYNCOBJ_TIMELINE for amdgpu
i915:
- Fix GitLab issue #446 causing GPU hangs: Do not restore invalid RS
state
- Fix GitLab issue #846: Restore coarse power gating that was
disabled by initial RC66 context corruption security fixes.
- Revert f6ec948309 ("drm/i915: extend audio CDCLK>=2*BCLK
constraint to more platforms") to avoid screen flicker
- Fix to fill in unitialized uabi_instance in virtual engine uAPI
- Add two missing W/As for ICL and EHL"
* tag 'drm-fixes-2020-01-10' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu
drm/amd/display: Reduce HDMI pixel encoding if max clock is exceeded
Revert "drm/amdgpu: Set no-retry as default."
drm/fb-helper: Round up bits_per_pixel if possible
drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model
drm/i915/dp: Disable Port sync mode correctly on teardown
drm/i915: Add Wa_1407352427:icl,ehl
drm/i915: Add Wa_1408615072 and Wa_1407596294 to icl,ehl
drm/i915/gt: Restore coarse power gating
drm/i915/gt: Do not restore invalid RS state
drm/i915: Limit audio CDCLK>=2*BCLK constraint back to GLK only
drm/i915/gt: Mark up virtual engine uabi_instance
drm/dp_mst: correct the shifting in DP_REMOTE_I2C_READ
Five small driver fixes:
- Fix error flow with MR allocation in bnxt_re
- An errata work around for bnxt_re
- Misuse of the workqueue API in hfi1
- Protocol error in hfi1
- Regression in 5.5 related to the mmap rework with i40iw
-----BEGIN PGP SIGNATURE-----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=c38z
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"First RDMA subsystem updates for 5.5-rc. A very small set of fixes,
most people seem to still be recovering from December!
Five small driver fixes:
- Fix error flow with MR allocation in bnxt_re
- An errata work around for bnxt_re
- Misuse of the workqueue API in hfi1
- Protocol error in hfi1
- Regression in 5.5 related to the mmap rework with i40iw"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
i40iw: Remove setting of VMA private data and use rdma_user_mmap_io
IB/hfi1: Adjust flow PSN with the correct resync_psn
IB/hfi1: Don't cancel unused work item
RDMA/bnxt_re: Fix Send Work Entry state check while polling completions
RDMA/bnxt_re: Avoid freeing MR resources if dereg fails
- Fix GitLab issue #446 causing GPU hangs: Do not restore invalid RS state
- Fix GitLab issue #846: Restore coarse power gating that was disabled
by initial RC66 context corruption security fixes.
- Revert f6ec948309 ("drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms")
to avoid screen flicker
- Fix to fill in unitialized uabi_instance in virtual engine uAPI
- Add two missing W/As for ICL and EHL
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109133458.GA15558@jlahtine-desk.ger.corp.intel.com
- Select GPIOLIB_IRQCHIP on the max77620 GPIO expander
- Fix context restore in the Zynq driver
- Create a new ACPI quirk handler for disabling wakeups on
problematic hardware.
- Fix a coding style issue on the mockup device.
-----BEGIN PGP SIGNATURE-----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=IbMi
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here is a host of GPIO fixes for the v5.5 series. The ACPI fix is
especially important, see summary below and in the commit for details:
- Select GPIOLIB_IRQCHIP on the max77620 GPIO expander
- Fix context restore in the Zynq driver
- Create a new ACPI quirk handler for disabling wakeups on
problematic hardware.
- Fix a coding style issue on the mockup device"
* tag 'gpio-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism
gpiolib: acpi: Turn dmi_system_id table into a generic quirk table
gpio: zynq: Fix for bug in zynq_gpio_restore_context API
gpio: max77620: Add missing dependency on GPIOLIB_IRQCHIP
gpio: mockup: fix coding style
- Fix erroneous shift in the Meson driver
- Make Lochnagar select the GPIOLIB Kconfig symbol
-----BEGIN PGP SIGNATURE-----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=OF8o
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Two fixes for pin control, not much to say about it, it's just regular
driver fixes:
- Fix erroneous shift in the Meson driver
- Make Lochnagar select the GPIOLIB Kconfig symbol"
* tag 'pinctrl-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: meson: Fix wrong shift value when get drive-strength
pinctrl: lochnagar: select GPIOLIB
Pull input fixes from Dmitry Torokhov:
"Just a few small fixups here"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: imx_sc_key - only take the valid data from SCU firmware as key state
Input: add safety guards to input_set_keycode()
Input: input_event - fix struct padding on sparc64
Input: uinput - always report EPOLLOUT
The I2C specification states that tsu:sto for standard mode timing must
be at minimum 4us. Pictographically, this is:
SCL: ____/~~~~~~~~~
SDA: _________/~~~~
->| |<- 4us minimum
We are currently waiting 2.5us between asserting SCL and SDA, which is
in violation of the standard. Adjust the timings to ensure that we meet
what is stipulated as the minimum timings to ensure that all devices
correctly interpret the STOP bus transition.
This is more important than trying to generate a square wave with even
duty cycle.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Micron flashes do not support 16 bit writes on the Status Register.
According to micron datasheets, when using the Write Status Register
(01h) command, the chip select should be driven LOW and held LOW until
the eighth bit of the last data byte has been latched in, after which
it must be driven HIGH. If CS is not driven HIGH, the command is not
executed, flag status register error bits are not set, and the write enable
latch remains set to 1. This fixes the lock operations on micron flashes.
Reported-by: John Garry <john.garry@huawei.com>
Fixes: 39d1e3340c ("mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
With gcc -O3, we get a new warning:
In file included from arch/arm64/include/asm/processor.h:28,
from drivers/mtd/sm_ftl.c:8:
In function 'memset',
inlined from 'sm_read_sector.constprop' at drivers/mtd/sm_ftl.c:250:3:
include/linux/string.h:411:9: error: argument 1 null where non-null expected [-Werror=nonnull]
return __builtin_memset(p, c, size);
>From all I can tell, this cannot happen (the function is called
either with a NULL buffer or with a -1 block number but not both),
but adding a check makes it more robust and avoids the warning.
Fixes: mmtom ("init/Kconfig: enable -O3 for all arches")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The commit converting the driver to DMAengine was missing the flags for
the memcpy prepare call.
It went unnoticed since the omap-dma driver was ignoring them.
Fixes: 3ed6a4d1de (" mtd: onenand: omap2: Convert to use dmaengine for memcp")
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Use dma_addr_t type to pass memory address and control data in
DMA descriptor fields memory_pointer and ctrl_data_ptr
To fix warning: cast to pointer from integer of different size
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
We are currently using nand_soft_waitrdy to poll the status of the NAND
flash. FMC2 enables the wait feature bit (this feature is mandatory for
the sequencer mode). By enabling this feature, we can't poll the status
of the NAND flash, the read status command is stucked in FMC2 pipeline
until R/B# signal is high, and locks the CPU bus.
To avoid to lock the CPU bus, we poll FMC2 ISR register. This register
reports the status of the R/B# signal.
Fixes: 2cd457f328 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Pull HID fixes from Jiri Kosina:
- fix for OOB in hiddev, from Dmitry Torokhov
- _poll API fixes for hidraw, from Marcel Holtmann
- functional fix for Steam driver, from Rodrigo Rivas Costa
- a few new device IDs / device-specific quirks and other assorted
smaller fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: steam: Fix input device disappearing
HID: intel-ish-hid: ipc: Add Tiger Lake PCI device ID
drivers/hid/hid-multitouch.c: fix a possible null pointer access.
HID: wacom: Recognize new MobileStudio Pro PID
HID: intel-ish-hid: ipc: add CMP device id
HID: hiddev: fix mess in hiddev_open()
HID: hid-input: clear unmapped usages
HID: Add quirk for incorrect input length on Lenovo Y720
HID: asus: Ignore Asus vendor-page usage-code 0xff events
HID: ite: Add USB id match for Acer SW5-012 keyboard dock
HID: Add quirk for Xin-Mo Dual Controller
HID: Fix slab-out-of-bounds read in hid_field_extract
HID: multitouch: Add LG MELF0410 I2C touchscreen support
HID: uhid: Fix returning EPOLLOUT from uhid_char_poll
HID: hidraw: Fix returning EPOLLOUT from hidraw_poll
Pull networking fixes from David Miller:
1) Missing netns pointer init in arp_tables, from Florian Westphal.
2) Fix normal tcp SACK being treated as D-SACK, from Pengcheng Yang.
3) Fix divide by zero in sch_cake, from Wen Yang.
4) Len passed to skb_put_padto() is wrong in qrtr code, from Carl
Huang.
5) cmd->obj.chunk is leaked in sctp code error paths, from Xin Long.
6) cgroup bpf programs can be released out of order, fix from Roman
Gushchin.
7) Make sure stmmac debugfs entry name is changed when device name
changes, from Jiping Ma.
8) Fix memory leak in vlan_dev_set_egress_priority(), from Eric
Dumazet.
9) SKB leak in lan78xx usb driver, also from Eric Dumazet.
10) Ridiculous TCA_FQ_QUANTUM values configured can cause loops in fq
packet scheduler, reject them. From Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
tipc: fix wrong connect() return code
tipc: fix link overflow issue at socket shutdown
netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present
netfilter: conntrack: dccp, sctp: handle null timeout argument
atm: eni: fix uninitialized variable warning
macvlan: do not assume mac_header is set in macvlan_broadcast()
net: sch_prio: When ungrafting, replace with FIFO
mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO
MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos
gtp: fix bad unlock balance in gtp_encap_enable_socket
pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM
tipc: remove meaningless assignment in Makefile
tipc: do not add socket.o to tipc-y twice
net: stmmac: dwmac-sun8i: Allow all RGMII modes
net: stmmac: dwmac-sunxi: Allow all RGMII modes
net: usb: lan78xx: fix possible skb leak
net: stmmac: Fixed link does not need MDIO Bus
vlan: vlan_changelink() should propagate errors
vlan: fix memory leak in vlan_dev_set_egress_priority
stmmac: debugfs entry name is not be changed when udev rename device name.
...
Commit 85a8ce62c2 ("block: add bio_truncate to fix guard_bio_eod")
adds bio_truncate() for handling bio EOD. However, bio_truncate()
doesn't use the passed 'op' parameter from guard_bio_eod's callers.
So bio_trunacate() may retrieve wrong 'op', and zering pages may
not be done for READ bio.
Fixes this issue by moving guard_bio_eod() after bio_set_op_attrs()
in submit_bh_wbc() so that bio_truncate() can always retrieve correct
op info.
Meantime remove the 'op' parameter from guard_bio_eod() because it isn't
used any more.
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: linux-fsdevel@vger.kernel.org
Fixes: 85a8ce62c2 ("block: add bio_truncate to fix guard_bio_eod")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Fold in kerneldoc and bio_op() change.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The `connected` value for wired devices was not properly initialized,
it must be set to `true` upon creation, because wired devices do not
generate connection events.
When a raw client (the Steam Client) uses the device, the input device
is destroyed. Then, when the raw client finishes, it must be recreated.
But since the `connected` variable was false this never happended.
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
amd-drm-fixes-5.5-2020-01-08:
amdgpu:
- Stability fix for raven
- Reduce pixel encoding to if max clock is exceeded on HDMI
to allow additional high res modes
UAPI:
- enable DRIVER_SYNCOBJ_TIMELINE for amdgpu
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108213649.5485-1-alexander.deucher@amd.com
-sun4i: Fix RGB_DIV clock min divider on old hardware (Chen-Yu)
-fb_helper: Fix bits_per_pixel param set behavior to round up (Geert)
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHF6rntfJ3enn8gh8cywAJXLcr3kFAl4WQl4ACgkQcywAJXLc
r3kQYwf7Bb+9TIlGf2WTWHbkoPdCN3qgu5XHWGbMv4OjcBVMeBE1+Lx4X5ihwFkC
DuRKvlnW9gfMJg9l+i1PdYuBMFUlcGg3pBmdBEdz0eIZfP0ZL3J9J/s6oZSwuz4v
TDWQEXKD+9MRmR3MtW+C8qIf6EevWHaVZpvvKhmVjf9Sredm2gEQwkBpUXSGGJ/w
FBhvC4zL/iLQOp3wX0sjdnfBc6uXM7JB+mHMXTcAJ3eey9HGAQXQvbWROaTCKuGq
L5hdz4RMiJ8+gTO9tZ6dzlfzZdY/wTQgwdVw3yVeGfeeC32VOjsUGWI5Jpb/SA03
gcHwNt/tMXZ8c0TCq5QNGAoTWUcrrg==
=4GUy
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-01-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
mst: Fix NO_STOP_BIT bit offset (Wayne)
sun4i: Fix RGB_DIV clock min divider on old hardware (Chen-Yu)
fb_helper: Fix bits_per_pixel param set behavior to round up (Geert)
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108205949.GA233273@art_vandelay
In my attempt to fix a memory leak, I introduced a double-free in the
pstore error path. Instead of trying to manage the allocation lifetime
between persistent_ram_new() and its callers, adjust the logic so
persistent_ram_new() always takes a kstrdup() copy, and leaves the
caller's allocation lifetime up to the caller. Therefore callers are
_always_ responsible for freeing their label. Before, it only needed
freeing when the prz itself failed to allocate, and not in any of the
other prz failure cases, which callers would have no visibility into,
which is the root design problem that lead to both the leak and now
double-free bugs.
Reported-by: Cengiz Can <cengiz@kernel.wtf>
Link: https://lore.kernel.org/lkml/d4ec59002ede4aaf9928c7f7526da87c@kernel.wtf
Fixes: 8df955a32a ("pstore/ram: Fix error-path memory leak in persistent_ram_new() callers")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The current 'tipc_wait_for_connect()' function does a wait-loop for the
condition 'sk->sk_state != TIPC_CONNECTING' to conclude if the socket
connecting has done. However, when the condition is met, it returns '0'
even in the case the connecting is actually failed, the socket state is
set to 'TIPC_DISCONNECTING' (e.g. when the server socket has closed..).
This results in a wrong return code for the 'connect()' call from user,
making it believe that the connection is established and go ahead with
building, sending a message, etc. but finally failed e.g. '-EPIPE'.
This commit fixes the issue by changing the wait condition to the
'tipc_sk_connected(sk)', so the function will return '0' only when the
connection is really established. Otherwise, either the socket 'sk_err'
if any or '-ETIMEDOUT'/'-EINTR' will be returned correspondingly.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a socket is suddenly shutdown or released, it will reject all the
unreceived messages in its receive queue. This applies to a connected
socket too, whereas there is only one 'FIN' message required to be sent
back to its peer in this case.
In case there are many messages in the queue and/or some connections
with such messages are shutdown at the same time, the link layer will
easily get overflowed at the 'TIPC_SYSTEM_IMPORTANCE' backlog level
because of the message rejections. As a result, the link will be taken
down. Moreover, immediately when the link is re-established, the socket
layer can continue to reject the messages and the same issue happens...
The commit refactors the '__tipc_shutdown()' function to only send one
'FIN' in the situation mentioned above. For the connectionless case, it
is unavoidable but usually there is no rejections for such socket
messages because they are 'dest-droppable' by default.
In addition, the new code makes the other socket states clear
(e.g.'TIPC_LISTEN') and treats as a separate case to avoid misbehaving.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
