This patch adds missing MODULE_DEVICE_TABLE definition
which generates correct modalias for automatic loading
of this driver when it is built as an external module.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Link: https://lore.kernel.org/r/20220928151346.1942977-1-zengheng4@huawei.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The o_slope value is dependent of the o_slope_sign, refactor code to get
rid of unnecessary if constructs.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230111074528.29354-15-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The platform name and efuse parsing function pointer are only used while
probing the device. Use them from the svs_platform_data struct instead.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-12-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Moving svs_platform_probe into driver probe function will allow us to
reduce svs_platform members. This will be done in a follow-up patch.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-11-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
If a compatible misses a match data entry, then something is wrong in
the development phase, we don't need to check for that at runtime.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-10-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
We only ever call the SoC specific probe function from
svs_platform_probe. No need to carry that function in a global
datastructure around.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-9-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Some projects might not support CONFIG_DEBUG_FS but still needs svs to be
alive. Therefore, enclose debug cmd codes with CONFIG_DEBUG_FS to make sure
svs can be alive when CONFIG_DEBUG_FS not supported.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-8-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
svs_init01() calls pm_runtime_get_sync() and added fail path as
svs_init01_finish to put usage_counter. However, pm_runtime_get_sync()
will increment usage_counter even it failed. Fix it by replacing it with
pm_runtime_resume_and_get() to keep usage counter balanced.
Fixes: 681a02e950 ("soc: mediatek: SVS: introduce MTK SVS engine")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230111074528.29354-5-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
If svs init02 fail, it means we cannot rely on svs bank voltages anymore.
We need to disable svs function and restore DVFS opp voltages back to the
default voltages for making sure we have enough DVFS voltages.
Fixes: 681a02e950 ("soc: mediatek: SVS: introduce MTK SVS engine")
Fixes: 0bbb09b2af ("soc: mediatek: SVS: add mt8192 SVS GPU driver")
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Link: https://lore.kernel.org/r/20230111074528.29354-2-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
If the system does not come from reset (like when is booted via
kexec()), the peripheral might triger an IRQ before the data structures
are initialised.
Fixes:
[ 0.227710] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000f08
[ 0.227913] Call trace:
[ 0.227918] svs_isr+0x8c/0x538
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20221127-mtk-svs-v2-0-145b07663ea8@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Commit a92438c5a3 ("soc: mediatek: mtk-svs: Use bitfield access macros
where possible") introduced the use of FIELD_GET and FIELD_PREP macros,
which are defined in the bitfield header. Add an explicit include for it
so we're sure to have the symbols defined independently of the config.
Fixes: a92438c5a3 ("soc: mediatek: mtk-svs: Use bitfield access macros where possible")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220829204439.3748648-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
In order to enhance readability and safety during registers setup
and value retrieval, redefine a few register related macros and
convert all open-coded instances of bitfield setting/retrieval
to use the FIELD_PREP() and FIELD_GET() macros.
While at it, some macros were renamed to further enhance readability.
This commit brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220825184616.2118870-3-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Commonize the repeating pattern for reading the "t-calibration-data"
efuse data in a new function svs_thermal_efuse_get_data(), reducing
the size of this driver.
No functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220825184616.2118870-2-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
In error cases, this driver never calls dev_pm_opp_of_remove_table():
instead of doing that, simple switch to a devm variant, which will
automagically do that for us.
Fixes: 681a02e950 ("soc: mediatek: SVS: introduce MTK SVS engine")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220726141653.177948-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
If CONFIG_OF is not set, we get a -Wunused-const-variable: dropping
of_match_ptr() solves that issue.
Fixes: 681a02e950 ("soc: mediatek: SVS: introduce MTK SVS engine")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220726141653.177948-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Instead of using irq_of_parse_and_map() to retrieve the interrupt from
devicetree, switch to platform_get_irq() instead: this function will
conveniently also write an error message in case the irq is not found.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220726141653.177948-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
When building this driver for an architecture that does not support
CONFIG_PM_SLEEP, such as hexagon, the following warnings occur:
drivers/soc/mediatek/mtk-svs.c:1481:12: error: unused function 'svs_suspend' [-Werror,-Wunused-function]
static int svs_suspend(struct device *dev)
^
drivers/soc/mediatek/mtk-svs.c:1515:12: error: unused function 'svs_resume' [-Werror,-Wunused-function]
static int svs_resume(struct device *dev)
^
2 errors generated.
This happens because SIMPLE_DEV_PM_OPS uses SET_SYSTEM_SLEEP_PM_OPS,
which evaluates to nothing when CONFIG_PM_SLEEP is not set, leaving the
functions unused in the eyes of the compiler.
This problem was rectified in commit 1a3c7bb088 ("PM: core: Add new
*_PM_OPS macros, deprecate old ones") with new macros. Use
DEFINE_SIMPLE_DEV_PM_OPS to fix the warning while not changing
svs_pm_ops when CONFIG_PM_SLEEP is set.
Fixes: 681a02e950 ("soc: mediatek: SVS: introduce MTK SVS engine")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220622175649.1856337-1-nathan@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Fix the missing clk_disable_unprepare() before return
from svs_resume() in the error handling case.
Signed-off-by: Peng Wu <wupeng58@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Link: https://lore.kernel.org/r/20220623070240.63382-1-wupeng58@huawei.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
mt8192 SVS GPU uses 2-line (high/low bank) HW architecture to provide
bank voltages. High bank helps update higher frequency's voltage
and low bank helps update lower frequency's voltage.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20220516004311.18358-8-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The purpose of SVS is to help find the suitable voltages
for DVFS. Therefore, if SVS bank voltages are concerned
to be wrong, we can show/disable SVS bank voltages by
this patch.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20220516004311.18358-6-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
SVS monitor mode is based on different thermal temperature
to provide suitable SVS bank voltages.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20220516004311.18358-5-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The Smart Voltage Scaling(SVS) engine is a piece of hardware
which calculates suitable SVS bank voltages to OPP voltage table.
Then, DVFS driver could apply those SVS bank voltages to PMIC/Buck
when receiving OPP_EVENT_ADJUST_VOLTAGE.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20220516004311.18358-4-roger.lu@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
