Make decision making of whether we need to retry read/write similar for
O_NONBLOCK and RWF_NOWAIT. Set REQ_F_NOWAIT when either is specified and
use it for all relevant checks. Also fix resubmitting NOWAIT requests
via io_rw_reissue().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We already have implicit do-while for read-retries but with goto in the
end. Convert it to an actual do-while, it highlights it so making a
bit more understandable and is cleaner in general.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_read() has not the simpliest control flow with a lot of jumps and
it's hard to read. One of those is a out_free: label, which frees iovec.
However, from the middle of io_read() iovec is NULL'ed and so
kfree(iovec) is no-op, it leaves us with two place where we can inline
it and further clean up the code.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have invariant in io_read() of how much we're trying to read spilled
into an iter and io_size variable. The last one controls decision making
about whether to do read-retries. However, io_size is modified only
after the first read attempt, so if we happen to go for a third retry in
a single call to io_read(), we will get io_size greater than in the
iterator, so may lead to various side effects up to live-locking.
Modify io_size each time.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now we give out ownership of iovec into io_setup_async_rw(), so it
either sets request's context right or frees the iovec on error itself.
Makes our life a bit easier at call sites.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
First, instead of checking iov_iter_count(iter) for 0 to find out that
all needed bytes were read, just compare returned code against io_size.
It's more reliable and arguably cleaner.
Also, place the half-read case into an else branch and delete an extra
label.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
!io_file_supports_async() case of io_read() is hard to read, it jumps
somewhere in the middle of the function just to do async setup and fail
on a similar check. Call io_setup_async_rw() directly for this case,
it's much easier to follow.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's easy to make a mistake in io_cqring_wait() because for all
break/continue clauses we need to watch for prepare/finish_wait to be
used correctly. Extract all those into a new helper
io_cqring_wait_schedule(), and transforming the loop into simple series
of func calls: prepare(); check_and_schedule(); finish();
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
schedule_timeout() with timeout=MAX_SCHEDULE_TIMEOUT is guaranteed to
work just as schedule(), so instead of hand-coding it based on arguments
always use the timeout version and simplify code.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Files and task cancellations go over same steps trying to cancel
requests in io-wq, poll, etc. Deduplicate it with a helper.
note: new io_uring_try_cancel_requests() is former
__io_uring_cancel_task_requests() with files passed as an agrument and
flushing overflowed requests.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
do_read() returning 0 bytes read (not -EAGAIN/etc.) is not an important
enough of a case to prioritise it. Fold it into ret < 0 check, so we get
rid of an extra if and make it a bit more readable.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't know for how long REQ_F_INFLIGHT is going to stay, cleaner to
extract a helper for marking requests as so.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Shouldn't be a problem now, but it's better to clean
REQ_F_WORK_INITIALIZED and work->flags only after relevant resources are
killed, so cancellation see them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->files now have same lifetime as all other iowq-work resources,
inline io_req_drop_files() for consistency. Moreover, since
REQ_F_INFLIGHT is no more files specific, the function name became
very confusing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have no request types left using needs_file_no_error, remove it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we hit a "goto out_free;" before the "ctx->file_data" pointer has
been assigned then it leads to a NULL derefence when we call:
free_fixed_rsrc_data(ctx->file_data);
We can fix this by moving the assignment earlier.
Fixes: 1ad555c6ae ("io_uring: create common fixed_rsrc_data allocation routines")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the missing kernel io_uring header, add Pavel as a reviewer, and
exclude io_uring from the FILESYSTEMS section to avoid keep spamming Al
(mainly) with bug reports, patches, etc.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds support for skipping a file descriptor when using
IORING_REGISTER_FILES_UPDATE. __io_sqe_files_update will skip fds set
to IORING_REGISTER_FILES_SKIP. IORING_REGISTER_FILES_SKIP is inturn
added as a #define in io_uring.h
Signed-off-by: noah <goldstein.w.n@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace a while with a simple for loop, that looks way more natural, and
enables us to use "continue" as indexes are no more updated by hand in
the end of the loop.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We grab a task for each request and while putting it it also have to do
extra work like inflight accounting and waking up that task. This
sequence is duplicated several time, it's good time to add a helper.
More to that, the helper generates better code due to better locality
and so not failing alias analysis.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For SQPOLL io_uring we want to have only one file note held by
sqo_task. Add a warning to make sure it holds. It's deep in
io_uring_add_task_file() out of hot path, so shouldn't hurt.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function io_remove_personalities() is very similar to
io_unregister_personality(),so implement io_remove_personalities()
calling io_unregister_personality().
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently split the close into two, in case we have a ->flush op
that we can't safely handle from non-blocking context. This requires
us to flag the op as uncancelable if we do need to punt it async, and
that means special handling for just this op type.
Use __close_fd_get_file() and grab the files lock so we can get the file
and check if we need to go async in one atomic operation. That gets rid
of the need for splitting this into two steps, and hence the need for
IO_WQ_WORK_NO_CANCEL.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Assumes current->files->file_lock is already held on invocation. Helps
the caller check the file before removing the fd, if it needs to.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a request is completed with comp_state, its completion reference
put is deferred to io_submit_flush_completions(), but the submission
is put not far from there, so do it together to save one atomic dec per
request. That targets requests that complete inline, e.g. buffered rw,
send/recv.
Proper benchmarking haven't been conducted but for nops(batch=32) it was
around 7901 vs 8117 KIOPS (~2.7%), or ~4% per perf profiling.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_submit_flush_completions() is called down the stack in the _state
version of io_req_complete(), that's ok because is only called by
io_uring opcode handler functions directly. Move it up to
__io_queue_sqe() as preparation.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_req_complete() inlining is a bit weird, some compilers don't
optimise out the non-NULL branch of it even when called as
io_req_complete(). Help it a bit by extracting state and stateless
helpers out of __io_req_complete().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Deduplicates translation of timeout flags into hrtimer_mode.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When io_req_task_work_add() fails, the request will be cancelled by
enqueueing via task_works of io-wq. Extract a function for that.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The check in io_state_file_put() is optimised pretty well when called
from __io_file_get(). Don't pollute the code with all these variants.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Get rid of a label in io_alloc_req(), it's cleaner to do return
directly.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Apparently, there is one more place hand coded calculation of number of
CQ events in the ring. Use __io_cqring_events() helper in
io_get_cqring() as well. Naturally, assembly stays identical.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The name is confusing and it's used only in one place.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
personality_idr is usually synchronised by uring_lock, the exception
would be removing personalities in io_ring_ctx_wait_and_kill(), which
is legit as refs are killed by that point but still would be more
resilient to do it under the lock.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's awkward to pass return a value into a function for it to return it
back. Check it at the caller site and clean up io_resubmit_prep() a bit.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The hot path is IO completing on the first try. Reshuffle io_rw_reissue() so
it's checked first.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make the percpu ref release function names consistent between rsrc data
and nodes.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Create common alloc/free fixed_rsrc_data routines for both files and
buffers.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
[remove buffer part]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Create common routines to be used for both files/buffers registration.
[remove io_sqe_rsrc_set_node substitution]
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
[merge, quiesce only for files]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A simple prep patch allowing to set refnode callbacks after it was
allocated. This needed to 1) keep ourself off of hi-level functions
where it's not pretty and they are not necessary 2) amortise ref_node
allocation in the future, e.g. for updates.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split alloc_fixed_file_ref_node into resource generic/specific parts,
to be leveraged for fixed buffers.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Uplevel ref_list and make it common to all resources. This is to
allow one common ref_list to be used for both files, and buffers
in upcoming patches.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Generalize io_queue_rsrc_removal to handle both files and buffers.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
[remove io_mapped_ubuf from rsrc tables/etc. for now]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a prep rename patch for subsequent patches to generalize file
registration.
[io_uring_rsrc_update:: rename fds -> data]
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
[leave io_uring_files_update as struct]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move allocation of buffer management structures, and validation of
buffers into separate routines.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
