Hi Linus,
This is my very first pull-request. I've been working full-time as
a kernel developer for more than two years now. During this time I've
been fixing bugs reported by Coverity all over the tree and, as part
of my work, I'm also contributing to the KSPP. My work in the kernel
community has been supervised by Greg KH and Kees Cook.
OK. So, after the quick introduction above, please, pull the following
patches that mark switch cases where we are expecting to fall through.
These patches are part of the ongoing efforts to enable -Wimplicit-fallthrough.
They have been ignored for a long time (most of them more than 3 months,
even after pinging multiple times), which is the reason why I've created
this tree. Most of them have been baking in linux-next for a whole development
cycle. And with Stephen Rothwell's help, we've had linux-next nag-emails
going out for newly introduced code that triggers -Wimplicit-fallthrough
to avoid gaining more of these cases while we work to remove the ones
that are already present.
I'm happy to let you know that we are getting close to completing this
work. Currently, there are only 32 of 2311 of these cases left to be
addressed in linux-next. I'm auditing every case; I take a look into
the code and analyze it in order to determine if I'm dealing with an
actual bug or a false positive, as explained here:
https://lore.kernel.org/lkml/c2fad584-1705-a5f2-d63c-824e9b96cf50@embeddedor.com/
While working on this, I've found and fixed the following missing
break/return bugs, some of them introduced more than 5 years ago:
84242b82d87850b51b6c5e420fe63509186e5034b5be8531817264235ee7cc5034a5d2479826cc865340f23df8df997abeeb2f10d82373307b00c5e65d25ff7a54a7ed5b3e7dc24bfa8f21ad0eaee6199ba8376ce1dc586a60a1a8e9b186f14e57562b4860747828eac5b974bee9cc44ba91162c930e3d0a
Once this work is finish, we'll be able to universally enable
"-Wimplicit-fallthrough" to avoid any of these kinds of bugs from
entering the kernel again.
Thanks
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAlzQR2IACgkQRwW0y0cG
2zEJbQ//X930OcBtT/9DRW4XL1Jeq0Mjssz/GLX2Vpup5CwwcTROG65no80Zezf/
yQRWnUjGX0OBv/fmUK32/nTxI/7k7NkmIXJHe0HiEF069GEENB7FT6tfDzIPjU8M
qQkB8NsSUWJs3IH6BVynb/9MGE1VpGBDbYk7CBZRtRJT1RMM+3kQPucgiZMgUBPo
Yd9zKwn4i/8tcOCli++EUdQ29ukMoY2R3qpK4LftdX9sXLKZBWNwQbiCwSkjnvJK
I6FDiA7RaWH2wWGlL7BpN5RrvAXp3z8QN/JZnivIGt4ijtAyxFUL/9KOEgQpBQN2
6TBRhfTQFM73NCyzLgGLNzvd8awem1rKGSBBUvevaPbgesgM+Of65wmmTQRhFNCt
A7+e286X1GiK3aNcjUKrByKWm7x590EWmDzmpmICxNPdt5DHQ6EkmvBdNjnxCMrO
aGA24l78tBN09qN45LR7wtHYuuyR0Jt9bCmeQZmz7+x3ICDHi/+Gw7XPN/eM9+T6
lZbbINiYUyZVxOqwzkYDCsdv9+kUvu3e4rPs20NERWRpV8FEvBIyMjXAg6NAMTue
K+ikkyMBxCvyw+NMimHJwtD7ho4FkLPcoeXb2ZGJTRHixiZAEtF1RaQ7dA05Q/SL
gbSc0DgLZeHlLBT+BSWC2Z8SDnoIhQFXW49OmuACwCUC68NHKps=
=k30z
-----END PGP SIGNATURE-----
Merge tag 'Wimplicit-fallthrough-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull Wimplicit-fallthrough updates from Gustavo A. R. Silva:
"Mark switch cases where we are expecting to fall through.
This is part of the ongoing efforts to enable -Wimplicit-fallthrough.
Most of them have been baking in linux-next for a whole development
cycle. And with Stephen Rothwell's help, we've had linux-next
nag-emails going out for newly introduced code that triggers
-Wimplicit-fallthrough to avoid gaining more of these cases while we
work to remove the ones that are already present.
We are getting close to completing this work. Currently, there are
only 32 of 2311 of these cases left to be addressed in linux-next. I'm
auditing every case; I take a look into the code and analyze it in
order to determine if I'm dealing with an actual bug or a false
positive, as explained here:
https://lore.kernel.org/lkml/c2fad584-1705-a5f2-d63c-824e9b96cf50@embeddedor.com/
While working on this, I've found and fixed the several missing
break/return bugs, some of them introduced more than 5 years ago.
Once this work is finished, we'll be able to universally enable
"-Wimplicit-fallthrough" to avoid any of these kinds of bugs from
entering the kernel again"
* tag 'Wimplicit-fallthrough-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (27 commits)
memstick: mark expected switch fall-throughs
drm/nouveau/nvkm: mark expected switch fall-throughs
NFC: st21nfca: Fix fall-through warnings
NFC: pn533: mark expected switch fall-throughs
block: Mark expected switch fall-throughs
ASN.1: mark expected switch fall-through
lib/cmdline.c: mark expected switch fall-throughs
lib: zstd: Mark expected switch fall-throughs
scsi: sym53c8xx_2: sym_nvram: Mark expected switch fall-through
scsi: sym53c8xx_2: sym_hipd: mark expected switch fall-throughs
scsi: ppa: mark expected switch fall-through
scsi: osst: mark expected switch fall-throughs
scsi: lpfc: lpfc_scsi: Mark expected switch fall-throughs
scsi: lpfc: lpfc_nvme: Mark expected switch fall-through
scsi: lpfc: lpfc_nportdisc: Mark expected switch fall-through
scsi: lpfc: lpfc_hbadisc: Mark expected switch fall-throughs
scsi: lpfc: lpfc_els: Mark expected switch fall-throughs
scsi: lpfc: lpfc_ct: Mark expected switch fall-throughs
scsi: imm: mark expected switch fall-throughs
scsi: csiostor: csio_wr: mark expected switch fall-through
...
Code that allocates locks using locks_alloc_lock() will free it
using locks_free_lock(), and will benefit from the BUG_ON()
consistency checks therein.
However some code (nfsd and lockd) allocate a lock embedded in
some other data structure, and so free the lock themselves after
calling locks_release_private(). This path does not benefit from
the consistency checks.
To help catch future errors, move the BUG_ON() checks to
locks_release_private() - which locks_free_lock() already calls.
This ensures that all users for locks will find out if the lock
isn't detached properly before being free.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warnings:
fs/affs/affs.h:124:38: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/configfs/dir.c:1692:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/configfs/dir.c:1694:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ceph/file.c:249:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/hash.c:233:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/hash.c:246:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext2/inode.c:1237:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext2/inode.c:1244:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1182:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1188:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1432:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1440:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/f2fs/node.c:618:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/f2fs/node.c:620:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/btrfs/ref-verify.c:522:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/gfs2/bmap.c:711:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/gfs2/bmap.c:722:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/jffs2/fs.c:339:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/nfsd/nfs4proc.c:429:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ufs/util.h:62:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ufs/util.h:43:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/fcntl.c:770:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/seq_file.c:319:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/libfs.c:148:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/libfs.c:150:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/signalfd.c:178:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/locks.c:1473:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Andreas reported that he was seeing the tdbtorture test fail in some
cases with -EDEADLCK when it wasn't before. Some debugging showed that
deadlock detection was sometimes discovering the caller's lock request
itself in a dependency chain.
While we remove the request from the blocked_lock_hash prior to
reattempting to acquire it, any locks that are blocked on that request
will still be present in the hash and will still have their fl_blocker
pointer set to the current request.
This causes posix_locks_deadlock to find a deadlock dependency chain
when it shouldn't, as a lock request cannot block itself.
We are going to end up waking all of those blocked locks anyway when we
go to reinsert the request back into the blocked_lock_hash, so just do
it prior to checking for deadlocks. This ensures that any lock blocked
on the current request will no longer be part of any blocked request
chain.
URL: https://bugzilla.kernel.org/show_bug.cgi?id=202975
Fixes: 5946c4319e ("fs/locks: allow a lock request to block other requests.")
Cc: stable@vger.kernel.org
Reported-by: Andreas Schneider <asn@redhat.com>
Signed-off-by: Neil Brown <neilb@suse.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Effective revert commit:
87709e28dc ("fs/locks: Use percpu_down_read_preempt_disable()")
This is causing major pain for PREEMPT_RT.
Sebastian did a lot of lockperf runs on 2 and 4 node machines with all
preemption modes (PREEMPT=n should be an obvious NOP for this patch
and thus serves as a good control) and no results showed significance
over 2-sigma (the PREEMPT=n results were almost empty at 1-sigma).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After moving all requests from
fl->fl_blocked_requests
to
new->fl_blocked_requests
it is nonsensical to do anything to all the remaining elements, there
aren't any. This should do something to all the requests that have been
moved. For simplicity, it does it to all requests in the target list.
Setting "f->fl_blocker = new" to all members of new->fl_blocked_requests
is "obviously correct" as it preserves the invariant of the linkage
among requests.
Reported-by: syzbot+239d99847eb49ecb3899@syzkaller.appspotmail.com
Fixes: 5946c4319e ("fs/locks: allow a lock request to block other requests.")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Use the aptly named function rather than open coding it. No functional
changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
- spaces before tabs,
- spaces at the end of lines,
- multiple blank lines,
- blank lines before EXPORT_SYMBOL,
can all go.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
posix_unblock_lock() is not specific to posix locks, and behaves
nearly identically to locks_delete_block() - the former returning a
status while the later doesn't.
So discard posix_unblock_lock() and use locks_delete_block() instead,
after giving that function an appropriate return value.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
When we find an existing lock which conflicts with a request,
and the request wants to wait, we currently add the request
to a list. When the lock is removed, the whole list is woken.
This can cause the thundering-herd problem.
To reduce the problem, we make use of the (new) fact that
a pending request can itself have a list of blocked requests.
When we find a conflict, we look through the existing blocked requests.
If any one of them blocks the new request, the new request is attached
below that request, otherwise it is added to the list of blocked
requests, which are now known to be mutually non-conflicting.
This way, when the lock is released, only a set of non-conflicting
locks will be woken, the rest can stay asleep.
If the lock request cannot be granted and the request needs to be
requeued, all the other requests it blocks will then be woken
To make this more concrete:
If you have a many-core machine, and have many threads all wanting to
briefly lock a give file (udev is known to do this), you can get quite
poor performance.
When one thread releases a lock, it wakes up all other threads that
are waiting (classic thundering-herd) - one will get the lock and the
others go to sleep.
When you have few cores, this is not very noticeable: by the time the
4th or 5th thread gets enough CPU time to try to claim the lock, the
earlier threads have claimed it, done what was needed, and released.
So with few cores, many of the threads don't end up contending.
With 50+ cores, lost of threads can get the CPU at the same time,
and the contention can easily be measured.
This patchset creates a tree of pending lock requests in which siblings
don't conflict and each lock request does conflict with its parent.
When a lock is released, only requests which don't conflict with each
other a woken.
Testing shows that lock-acquisitions-per-second is now fairly stable
even as the number of contending process goes to 1000. Without this
patch, locks-per-second drops off steeply after a few 10s of
processes.
There is a small cost to this extra complexity.
At 20 processes running a particular test on 72 cores, the lock
acquisitions per second drops from 1.8 million to 1.4 million with
this patch. For 100 processes, this patch still provides 1.4 million
while without this patch there are about 700,000.
Reported-and-tested-by: Martin Wilck <mwilck@suse.de>
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
posix_locks_conflict() and flock_locks_conflict() both return int.
leases_conflict() returns bool.
This inconsistency will cause problems for the next patch if not
fixed.
So change posix_locks_conflict() and flock_locks_conflict() to return
bool.
Also change the locks_conflict() helper.
And convert some
return (foo);
to
return foo;
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Now that requests can block other requests, we
need to be careful to always clean up those blocked
requests.
Any time that we wait for a request, we might have
other requests attached, and when we stop waiting,
we must clean them up.
If the lock was granted, the requests might have been
moved to the new lock, though when merged with a
pre-exiting lock, this might not happen.
In all cases we don't want blocked locks to remain
attached, so we remove them to be safe.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Tested-by: syzbot+a4a3d526b4157113ec6a@syzkaller.appspotmail.com
Tested-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Currently, a lock can block pending requests, but all pending
requests are equal. If lots of pending requests are
mutually exclusive, this means they will all be woken up
and all but one will fail. This can hurt performance.
So we will allow pending requests to block other requests.
Only the first request will be woken, and it will wake the others.
This patch doesn't implement this fully, but prepares the way.
- It acknowledges that a request might be blocking other requests,
and when the request is converted to a lock, those blocked
requests are moved across.
- When a request is requeued or discarded, all blocked requests are
woken.
- When deadlock-detection looks for the lock which blocks a
given request, we follow the chain of ->fl_blocker all
the way to the top.
Tested-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Both locks_remove_posix() and locks_remove_flock() use a
struct file_lock without calling locks_init_lock() on it.
This means the various list_heads are not initialized, which
will become a problem with a later patch.
So change them both to initialize properly. For flock locks,
this involves using flock_make_lock(), and changing it to
allow a file_lock to be passed in, so memory allocation isn't
always needed.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
This functionality will be useful in future patches, so
split it out from locks_wake_up_blocks().
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
struct file lock contains an 'fl_next' pointer which
is used to point to the lock that this request is blocked
waiting for. So rename it to fl_blocker.
The fl_blocked list_head in an active lock is the head of a list of
blocked requests. In a request it is a node in that list.
These are two distinct uses, so replace with two list_heads
with different names.
fl_blocked_requests is the head of a list of blocked requests
fl_blocked_member is a node in a member of that list.
The two different list_heads are never used at the same time, but that
will change in a future patch.
Note that a tracepoint is changed to report fl_blocker instead
of fl_next.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
This contains two new features:
1) Stack file operations: this allows removal of several hacks from the
VFS, proper interaction of read-only open files with copy-up,
possibility to implement fs modifying ioctls properly, and others.
2) Metadata only copy-up: when file is on lower layer and only metadata is
modified (except size) then only copy up the metadata and continue to
use the data from the lower file.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCW3srhAAKCRDh3BK/laaZ
PC6tAQCP+KklcN+TvNp502f+O/kATahSpgnun4NY1/p4I8JV+AEAzdlkTN3+MiAO
fn9brN6mBK7h59DO3hqedPLJy2vrgwg=
=QDXH
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
"This contains two new features:
- Stack file operations: this allows removal of several hacks from
the VFS, proper interaction of read-only open files with copy-up,
possibility to implement fs modifying ioctls properly, and others.
- Metadata only copy-up: when file is on lower layer and only
metadata is modified (except size) then only copy up the metadata
and continue to use the data from the lower file"
* tag 'ovl-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (66 commits)
ovl: Enable metadata only feature
ovl: Do not do metacopy only for ioctl modifying file attr
ovl: Do not do metadata only copy-up for truncate operation
ovl: add helper to force data copy-up
ovl: Check redirect on index as well
ovl: Set redirect on upper inode when it is linked
ovl: Set redirect on metacopy files upon rename
ovl: Do not set dentry type ORIGIN for broken hardlinks
ovl: Add an inode flag OVL_CONST_INO
ovl: Treat metacopy dentries as type OVL_PATH_MERGE
ovl: Check redirects for metacopy files
ovl: Move some dir related ovl_lookup_single() code in else block
ovl: Do not expose metacopy only dentry from d_real()
ovl: Open file with data except for the case of fsync
ovl: Add helper ovl_inode_realdata()
ovl: Store lower data inode in ovl_inode
ovl: Fix ovl_getattr() to get number of blocks from lower
ovl: Add helper ovl_dentry_lowerdata() to get lower data dentry
ovl: Copy up meta inode data from lowest data inode
ovl: Modify ovl_lookup() and friends to lookup metacopy dentry
...
Pull core signal handling updates from Eric Biederman:
"It was observed that a periodic timer in combination with a
sufficiently expensive fork could prevent fork from every completing.
This contains the changes to remove the need for that restart.
This set of changes is split into several parts:
- The first part makes PIDTYPE_TGID a proper pid type instead
something only for very special cases. The part starts using
PIDTYPE_TGID enough so that in __send_signal where signals are
actually delivered we know if the signal is being sent to a a group
of processes or just a single process.
- With that prep work out of the way the logic in fork is modified so
that fork logically makes signals received while it is running
appear to be received after the fork completes"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits)
signal: Don't send signals to tasks that don't exist
signal: Don't restart fork when signals come in.
fork: Have new threads join on-going signal group stops
fork: Skip setting TIF_SIGPENDING in ptrace_init_task
signal: Add calculate_sigpending()
fork: Unconditionally exit if a fatal signal is pending
fork: Move and describe why the code examines PIDNS_ADDING
signal: Push pid type down into complete_signal.
signal: Push pid type down into __send_signal
signal: Push pid type down into send_signal
signal: Pass pid type into do_send_sig_info
signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task
signal: Pass pid type into group_send_sig_info
signal: Pass pid and pid type into send_sigqueue
posix-timers: Noralize good_sigevent
signal: Use PIDTYPE_TGID to clearly store where file signals will be sent
pid: Implement PIDTYPE_TGID
pids: Move the pgrp and session pid pointers from task_struct to signal_struct
kvm: Don't open code task_pid in kvm_vcpu_ioctl
pids: Compute task_tgid using signal->leader_pid
...
-----BEGIN PGP SIGNATURE-----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=IMcz
-----END PGP SIGNATURE-----
Merge tag 'locks-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking updates from Jeff Layton:
"Just a couple of patches from Konstantin to fix /proc/locks when the
process that set the lock has exited, and a new tracepoint for the
flock() codepath. Also threw in mailmap entries for my addresses and a
comment cleanup"
* tag 'locks-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
locks: remove misleading obsolete comment
mailmap: remap some of my email addresses to kernel.org address
locks: add tracepoint in flock codepath
fs/lock: show locks taken by processes from another pidns
fs/lock: skip lock owner pid translation in case we are in init_pid_ns
The spinlock handling in this file has changed significantly since this
comment was written, and the file_lock_lock is no more. In addition,
this overall comment no longer applies. Deleting an entry now requires
both locks.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
When f_setown is called a pid and a pid type are stored. Replace the use
of PIDTYPE_PID with PIDTYPE_TGID as PIDTYPE_TGID goes to the entire thread
group. Replace the use of PIDTYPE_MAX with PIDTYPE_PID as PIDTYPE_PID now
is only for a thread.
Update the users of __f_setown to use PIDTYPE_TGID instead of
PIDTYPE_PID.
For now the code continues to capture task_pid (when task_tgid would
really be appropriate), and iterate on PIDTYPE_PID (even when type ==
PIDTYPE_TGID) out of an abundance of caution to preserve existing
behavior.
Oleg Nesterov suggested using the test to ensure we use PIDTYPE_PID
for tgid lookup also be used to avoid taking the tasklist lock.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This partially reverts commit c568d68341.
Overlayfs files will now automatically get the correct locks, no need to
hack overlay support in VFS.
It is a partial revert, because it leaves the locks_inode() calls in place
and defines locks_inode() to file_inode(). We could revert those as well,
but it would be unnecessary code churn and it makes sense to document that
we are getting the inode for locking purposes.
Don't revert MS_NOREMOTELOCK yet since that has been part of the userspace
API for some time (though not in a useful way). Will try to remove
internal flags later when the dust around the new mount API settles.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
This reverts commit 4d0c5ba2ff.
We now get write access on both overlay and underlying layers so this patch
is no longer needed for correct operation.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
There were no conflicts between this and the contents of linux-next
until just before the merge window, when we saw multiple problems:
- A minor conflict with my own y2038 fixes, which I could address
by adding another patch on top here.
- One semantic conflict with late changes to the NFS tree. I addressed
this by merging Deepa's original branch on top of the changes that
now got merged into mainline and making sure the merge commit includes
the necessary changes as produced by coccinelle.
- A trivial conflict against the removal of staging/lustre.
- Multiple conflicts against the VFS changes in the overlayfs tree.
These are still part of linux-next, but apparently this is no longer
intended for 4.18 [1], so I am ignoring that part.
As Deepa writes:
The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64 timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual
replacement becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions.
Thomas Gleixner adds:
I think there is no point to drag that out for the next merge window.
The whole thing needs to be done in one go for the core changes which
means that you're going to play that catchup game forever. Let's get
over with it towards the end of the merge window.
[1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CZX2
-----END PGP SIGNATURE-----
Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
"This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
As Deepa writes:
'The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64
timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual replacement
becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions'
Thomas Gleixner adds:
'I think there is no point to drag that out for the next merge
window. The whole thing needs to be done in one go for the core
changes which means that you're going to play that catchup game
forever. Let's get over with it towards the end of the merge window'"
* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
pstore: Remove bogus format string definition
vfs: change inode times to use struct timespec64
pstore: Convert internal records to timespec64
udf: Simplify calls to udf_disk_stamp_to_time
fs: nfs: get rid of memcpys for inode times
ceph: make inode time prints to be long long
lustre: Use long long type to print inode time
fs: add timespec64_truncate()
Currently if we face a lock taken by a process invisible in the current
pidns we skip the lock completely, but this
1) makes the output not that nice
(root@vz7)/: cat /proc/${PID_A2}/fdinfo/3
pos: 4
flags: 02100002
mnt_id: 257
lock: (root@vz7)/:
2) makes it more difficult to debug issues with leaked flocks
if you get error on lock, but don't see any locks in /proc/$id/fdinfo/$file
Let's show information about such locks again as previously, but
show zero in the owner pid field.
After the patch:
===============
(root@vz7)/:cat /proc/${PID_A2}/fdinfo/3
pos: 4
flags: 02100002
mnt_id: 295
lock: 1: FLOCK ADVISORY WRITE 0 b6:f8a61:529946 0 EOF
Fixes: 9d5b86ac13 ("fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks")
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Acked-by: Andrey Vagin <avagin@openvz.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
If the flock owner process is dead and its pid has been already freed,
pid translation won't work, but we still want to show flock owner pid
number when expecting /proc/$PID/fdinfo/$FD in init pidns.
Reproducer:
process A process A1 process A2
fork()--------->
exit() open()
flock()
fork()--------->
exit() sleep()
Before the patch:
================
(root@vz7)/: cat /proc/${PID_A2}/fdinfo/3
pos: 4
flags: 02100002
mnt_id: 257
lock: (root@vz7)/:
After the patch:
===============
(root@vz7)/:cat /proc/${PID_A2}/fdinfo/3
pos: 4
flags: 02100002
mnt_id: 295
lock: 1: FLOCK ADVISORY WRITE ${PID_A1} b6:f8a61:529946 0 EOF
Fixes: 9d5b86ac13 ("fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks")
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Acked-by: Andrey Vagin <avagin@openvz.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Variant of proc_create_data that directly take a struct seq_operations
argument + a private state size and drastically reduces the boilerplate
code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Some functions definitions have either the initial open brace and/or
the closing brace outside of column 1.
Move those braces to column 1.
This allows various function analyzers like gnu complexity to work
properly for these modified functions.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
But it's also a fairly small update this time around. Some cleanup,
RDMA fixes, overlayfs fixes, and a fix for an NFSv4 state bug.
The bigger deal for nfsd this time around is Jeff Layton's
already-merged i_version patches. This series has a minor conflict with
that one, and the resolution should be obvious. (Stephen Rothwell has
been carrying it in linux-next for what it's worth.)
-----BEGIN PGP SIGNATURE-----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=icEX
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.16' of git://linux-nfs.org/~bfields/linux
Pull nfsd update from Bruce Fields:
"A fairly small update this time around. Some cleanup, RDMA fixes,
overlayfs fixes, and a fix for an NFSv4 state bug.
The bigger deal for nfsd this time around was Jeff Layton's
already-merged i_version patches"
* tag 'nfsd-4.16' of git://linux-nfs.org/~bfields/linux:
svcrdma: Fix Read chunk round-up
NFSD: hide unused svcxdr_dupstr()
nfsd: store stat times in fill_pre_wcc() instead of inode times
nfsd: encode stat->mtime for getattr instead of inode->i_mtime
nfsd: return RESOURCE not GARBAGE_ARGS on too many ops
nfsd4: don't set lock stateid's sc_type to CLOSED
nfsd: Detect unhashed stids in nfsd4_verify_open_stid()
sunrpc: remove dead code in svc_sock_setbufsize
svcrdma: Post Receives in the Receive completion handler
nfsd4: permit layoutget of executable-only files
lockd: convert nlm_rqst.a_count from atomic_t to refcount_t
lockd: convert nlm_lockowner.count from atomic_t to refcount_t
lockd: convert nsm_handle.sm_count from atomic_t to refcount_t
The values of stat->mtime and inode->i_mtime may differ for overlayfs
and stat->mtime is the correct value to use when encoding getattr.
This is also consistent with the fact that other attr times are also
encoded from stat values.
Both callers of lease_get_mtime() already have the value of stat->mtime,
so the only needed change is that lease_get_mtime() will not overwrite
this value with inode->i_mtime in case the inode does not have an
exclusive lease.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a pure automated search-and-replace of the internal kernel
superblock flags.
The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.
Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.
The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"
SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When locks.c moved to using file_lock_context, the check for any locks that
were not released was moved from the __fput() to destroy_inode() path in
commit 8634b51f6c ("locks: convert lease handling to file_lock_context").
This warning has been quite useful for catching bugs, particularly in NFS
where lock handling still sees some churn.
Let's bring back the warning for leaked locks on __fput, as this warning is
much more likely to be seen and reported by users.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Since commit c69899a17c "NFSv4: Update of VFS byte range lock must be
atomic with the stateid update", NFSv4 has been inserting locks in rpciod
worker context. The result is that the file_lock's fl_nspid is the
kworker's pid instead of the original userspace pid.
The fl_nspid is only used to represent the namespaced virtual pid number
when displaying locks or returning from F_GETLK. There's no reason to set
it for every inserted lock, since we can usually just look it up from
fl_pid. So, instead of looking up and holding struct pid for every lock,
let's just look up the virtual pid number from fl_pid when it is needed.
That means we can remove fl_nspid entirely.
The translaton and presentation of fl_pid should handle the following four
cases:
1 - F_GETLK on a remote file with a remote lock:
In this case, the filesystem should determine the l_pid to return here.
Filesystems should indicate that the fl_pid represents a non-local pid
value that should not be translated by returning an fl_pid <= 0.
2 - F_GETLK on a local file with a remote lock:
This should be the l_pid of the lock manager process, and translated.
3 - F_GETLK on a remote file with a local lock, and
4 - F_GETLK on a local file with a local lock:
These should be the translated l_pid of the local locking process.
Fuse was already doing the correct thing by translating the pid into the
caller's namespace. With this change we must update fuse to translate
to init's pid namespace, so that the locks API can then translate from
init's pid namespace into the pid namespace of the caller.
With this change, the locks API will expect that if a filesystem returns
a remote pid as opposed to a local pid for F_GETLK, that remote pid will
be <= 0. This signifies that the pid is remote, and the locks API will
forego translating that pid into the pid namespace of the local calling
process.
Finally, we convert remote filesystems to present remote pids using
negative numbers. Have lustre, 9p, ceph, cifs, and dlm negate the remote
pid returned for F_GETLK lock requests.
Since local pids will never be larger than PID_MAX_LIMIT (which is
currently defined as <= 4 million), but pid_t is an unsigned int, we
should have plenty of room to represent remote pids with negative
numbers if we assume that remote pid numbers are similarly limited.
If this is not the case, then we run the risk of having a remote pid
returned for which there is also a corresponding local pid. This is a
problem we have now, but this patch should reduce the chances of that
occurring, while also returning those remote pid numbers, for whatever
that may be worth.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Struct file_lock is fairly large, so let's save some space on the stack by
using an allocation for struct file_lock in fcntl_getlk(), just as we do
for fcntl_setlk().
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
This will make it easier to implement a sane compat fcntl syscall.
[ jlayton: fix undeclared identifiers in 32-bit fcntl64 syscall handler ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
There are a few syntax violations that cause outputs of
a few comments to not be properly parsed in ReST format.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Set FL_CLOSE in fl_flags as in locks_remove_posix() when clearing locks.
NFS will check for this flag to ensure an unlock is sent in a following
patch.
Fuse handles flock and posix locks differently for FL_CLOSE, and so
requires a fixup to retain the existing behavior for flock.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I overlooked a few code-paths that can lead to
locks_delete_global_locks().
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Bruce Fields <bfields@fieldses.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-fsdevel@vger.kernel.org
Cc: syzkaller <syzkaller@googlegroups.com>
Link: http://lkml.kernel.org/r/20161008081228.GF3142@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull more vfs updates from Al Viro:
">rename2() work from Miklos + current_time() from Deepa"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Replace current_fs_time() with current_time()
fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
fs: Replace CURRENT_TIME with current_time() for inode timestamps
fs: proc: Delete inode time initializations in proc_alloc_inode()
vfs: Add current_time() api
vfs: add note about i_op->rename changes to porting
fs: rename "rename2" i_op to "rename"
vfs: remove unused i_op->rename
fs: make remaining filesystems use .rename2
libfs: support RENAME_NOREPLACE in simple_rename()
fs: support RENAME_NOREPLACE for local filesystems
ncpfs: fix unused variable warning
Pull misc vfs updates from Al Viro:
"Assorted misc bits and pieces.
There are several single-topic branches left after this (rename2
series from Miklos, current_time series from Deepa Dinamani, xattr
series from Andreas, uaccess stuff from from me) and I'd prefer to
send those separately"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (39 commits)
proc: switch auxv to use of __mem_open()
hpfs: support FIEMAP
cifs: get rid of unused arguments of CIFSSMBWrite()
posix_acl: uapi header split
posix_acl: xattr representation cleanups
fs/aio.c: eliminate redundant loads in put_aio_ring_file
fs/internal.h: add const to ns_dentry_operations declaration
compat: remove compat_printk()
fs/buffer.c: make __getblk_slow() static
proc: unsigned file descriptors
fs/file: more unsigned file descriptors
fs: compat: remove redundant check of nr_segs
cachefiles: Fix attempt to read i_blocks after deleting file [ver #2]
cifs: don't use memcpy() to copy struct iov_iter
get rid of separate multipage fault-in primitives
fs: Avoid premature clearing of capabilities
fs: Give dentry to inode_change_ok() instead of inode
fuse: Propagate dentry down to inode_change_ok()
ceph: Propagate dentry down to inode_change_ok()
xfs: Propagate dentry down to inode_change_ok()
...
-----BEGIN PGP SIGNATURE-----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=MUd+
-----END PGP SIGNATURE-----
Merge tag 'locks-v4.9-1' of git://git.samba.org/jlayton/linux
Pull file locking updates from Jeff Layton:
"Only a single patch from Nikolay this cycle, with a small change to
better handle /proc/locks in a containerized host"
* tag 'locks-v4.9-1' of git://git.samba.org/jlayton/linux:
locks: Filter /proc/locks output on proc pid ns
current_fs_time() uses struct super_block* as an argument.
As per Linus's suggestion, this is changed to take struct
inode* as a parameter instead. This is because the function
is primarily meant for vfs inode timestamps.
Also the function was renamed as per Arnd's suggestion.
Change all calls to current_fs_time() to use the new
current_time() function instead. current_fs_time() will be
deleted.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
As Oleg suggested, replace file_lock_list with a structure containing
the hlist head and a spinlock.
This completely removes the lglock from fs/locks.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: der.herr@hofr.at
Cc: paulmck@linux.vnet.ibm.com
Cc: riel@redhat.com
Cc: tj@kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Replace the global part of the lglock with a percpu-rwsem.
Since fcl_lock is a spinlock and itself nests under i_lock, which too
is a spinlock we cannot acquire sleeping locks at
locks_{insert,remove}_global_locks().
We can however wrap all fcl_lock acquisitions with percpu_down_read
such that all invocations of locks_{insert,remove}_global_locks() have
that read lock held.
This allows us to replace the lg_global part of the lglock with the
write side of the rwsem.
In the absense of writers, percpu_{down,up}_read() are free of atomic
instructions. This further avoids the very long preempt-disable
regions caused by lglock on larger machines.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: der.herr@hofr.at
Cc: paulmck@linux.vnet.ibm.com
Cc: riel@redhat.com
Cc: tj@kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The problem with writecount is: we want consistent handling of it for
underlying filesystems as well as overlayfs. Making sure i_writecount is
correct on all layers is difficult. Instead this patch makes sure that
when write access is acquired, it's always done on the underlying writable
layer (called the upper layer). We must also make sure to look at the
writecount on this layer when checking for conflicting leases.
Open for write already updates the upper layer's writecount. Leaving only
truncate.
For truncate copy up must happen before get_write_access() so that the
writecount is updated on the upper layer. Problem with this is if
something fails after that, then copy-up was done needlessly. E.g. if
break_lease() was interrupted. Probably not a big deal in practice.
Another interesting case is if there's a denywrite on a lower file that is
then opened for write or truncated. With this patch these will succeed,
which is somewhat counterintuitive. But I think it's still acceptable,
considering that the copy-up does actually create a different file, so the
old, denywrite mapping won't be touched.
On non-overlayfs d_real() is an identity function and d_real_inode() is
equivalent to d_inode() so this patch doesn't change behavior in that case.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
This patch allows flock, posix locks, ofd locks and leases to work
correctly on overlayfs.
Instead of using the underlying inode for storing lock context use the
overlay inode. This allows locks to be persistent across copy-up.
This is done by introducing locks_inode() helper and using it instead of
file_inode() to get the inode in locking code. For non-overlayfs the two
are equivalent, except for an extra pointer dereference in locks_inode().
Since lock operations are in "struct file_operations" we must also make
sure not to call underlying filesystem's lock operations. Introcude a
super block flag MS_NOREMOTELOCK to this effect.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
On busy container servers reading /proc/locks shows all the locks
created by all clients. This can cause large latency spikes. In my
case I observed lsof taking up to 5-10 seconds while processing around
50k locks. Fix this by limiting the locks shown only to those created
in the same pidns as the one the proc fs was mounted in. When reading
/proc/locks from the init_pid_ns proc instance then perform no
filtering
[ jlayton: reformat comments for 80 columns ]
Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
(Another one for the f_path debacle.)
ltp fcntl33 testcase caused an Oops in selinux_file_send_sigiotask.
The reason is that generic_add_lease() used filp->f_path.dentry->inode
while all the others use file_inode(). This makes a difference for files
opened on overlayfs since the former will point to the overlay inode the
latter to the underlying inode.
So generic_add_lease() added the lease to the overlay inode and
generic_delete_lease() removed it from the underlying inode. When the file
was released the lease remained on the overlay inode's lock list, resulting
in use after free.
Reported-by: Eryu Guan <eguan@redhat.com>
Fixes: 4bacc9c923 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull vfs copy_file_range updates from Al Viro:
"Several series around copy_file_range/CLONE"
* 'work.copy_file_range' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
btrfs: use new dedupe data function pointer
vfs: hoist the btrfs deduplication ioctl to the vfs
vfs: wire up compat ioctl for CLONE/CLONE_RANGE
cifs: avoid unused variable and label
nfsd: implement the NFSv4.2 CLONE operation
nfsd: Pass filehandle to nfs4_preprocess_stateid_op()
vfs: pull btrfs clone API to vfs layer
locks: new locks_mandatory_area calling convention
vfs: Add vfs_copy_file_range() support for pagecache copies
btrfs: add .copy_file_range file operation
x86: add sys_copy_file_range to syscall tables
vfs: add copy_file_range syscall and vfs helper
...a more descriptive name and we can drop the double underscore prefix.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Right now, we just get WARN_ON_ONCE, which is not particularly helpful.
Have it dump some info about the locks and the inode to make it easier
to track down leaked locks in the future.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
...so we can print information about it if there are leaked locks.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Add some tracepoints around the POSIX locking code. These were useful
when tracking down problems when handling the race between setlk and
close.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
We don't clean out OFD locks on close(), so there's no need to check
for a race with them here. They'll get cleaned out at the same time
that flock locks are.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Dmitry reported that he was able to reproduce the WARN_ON_ONCE that
fires in locks_free_lock_context when the flc_posix list isn't empty.
The problem turns out to be that we're basically rebuilding the
file_lock from scratch in fcntl_setlk when we discover that the setlk
has raced with a close. If the l_whence field is SEEK_CUR or SEEK_END,
then we may end up with fl_start and fl_end values that differ from
when the lock was initially set, if the file position or length of the
file has changed in the interim.
Fix this by just reusing the same lock request structure, and simply
override fl_type value with F_UNLCK as appropriate. That ensures that
we really are unlocking the lock that was initially set.
While we're there, make sure that we do pop a WARN_ON_ONCE if the
removal ever fails. Also return -EBADF in this event, since that's
what we would have returned if the close had happened earlier.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Fixes: c293621bbf (stale POSIX lock handling)
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
The Kconfig currently controlling compilation of this code is:
config FILE_LOCKING
bool "Enable POSIX file locking API" if EXPERT
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modularity so that when reading the
driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering gets bumped to one level earlier when we
use the more appropriate fs_initcall here. However we've made similar
changes before without any fallout and none is expected here either.
Cc: Jeff Layton <jlayton@poochiereds.net>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Pass a loff_t end for the last byte instead of the 32-bit count
parameter to allow full file clones even on 32-bit architectures.
While we're at it also simplify the read/write selection.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Simplify the code with list_first_entry_or_null().
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Mandatory locking appears to be almost unused and buggy and there
appears no real interest in doing anything with it. Since effectively
no one uses the code and since the code is buggy let's allow it to be
disabled at compile time. I would just suggest removing the code but
undoubtedly that will break some piece of userspace code somewhere.
For the distributions that don't care about this piece of code
this gives a nice starting point to make mandatory locking go away.
Cc: Benjamin Coddington <bcodding@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jeff Layton <jeff.layton@primarydata.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
All callers use locks_lock_inode_wait() instead.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Instead of having users check for FL_POSIX or FL_FLOCK to call the correct
locks API function, use the check within locks_lock_inode_wait(). This
allows for some later cleanup.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Users of the locks API commonly call either posix_lock_file_wait() or
flock_lock_file_wait() depending upon the lock type. Add a new function
locks_lock_inode_wait() which will check and call the correct function for
the type of lock passed in.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
locks_get_lock_context() uses cmpxchg() to install i_flctx.
cmpxchg() is a release operation which is correct. But it uses
a plain load to load i_flctx. This is incorrect. Subsequent loads
from i_flctx can hoist above the load of i_flctx pointer itself
and observe uninitialized garbage there. This in turn can lead
to corruption of ctx->flc_lock and other members.
Documentation/memory-barriers.txt explicitly requires to use
a barrier in such context:
"A load-load control dependency requires a full read memory barrier".
Use smp_load_acquire() in locks_get_lock_context() and in bunch
of other functions that can proceed concurrently with
locks_get_lock_context().
The data race was found with KernelThreadSanitizer (KTSAN).
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Fix kernel-doc warnings in fs/locks.c:
Warning(..//fs/locks.c:1577): No description found for parameter 'flags'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
They just call file_inode and then the corresponding *_inode_file_wait
function. Just make them static inlines instead.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Allow callers to pass in an inode instead of a filp.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: "J. Bruce Fields" <bfields@fieldses.org>
Tested-by: "J. Bruce Fields" <bfields@fieldses.org>
...and rename it to better describe how it works.
In order to fix a use-after-free in NFS, we need to be able to remove
locks from an inode after the filp associated with them may have already
been freed. flock_lock_file already only dereferences the filp to get to
the inode, so just change it so the callers do that.
All of the callers already pass in a lock request that has the fl_file
set properly, so we don't need to pass it in individually. With that
change it now only dereferences the filp to get to the inode, so just
push that out to the callers.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: "J. Bruce Fields" <bfields@fieldses.org>
Tested-by: "J. Bruce Fields" <bfields@fieldses.org>
Let's show locks which are associated with a file descriptor in
its fdinfo file.
Currently we don't have a reliable way to determine who holds a lock. We
can find some information in /proc/locks, but PID which is reported there
can be wrong. For example, a process takes a lock, then forks a child and
dies. In this case /proc/locks contains the parent pid, which can be
reused by another process.
$ cat /proc/locks
...
6: FLOCK ADVISORY WRITE 324 00:13:13431 0 EOF
...
$ ps -C rpcbind
PID TTY TIME CMD
332 ? 00:00:00 rpcbind
$ cat /proc/332/fdinfo/4
pos: 0
flags: 0100000
mnt_id: 22
lock: 1: FLOCK ADVISORY WRITE 324 00:13:13431 0 EOF
$ ls -l /proc/332/fd/4
lr-x------ 1 root root 64 Mar 5 14:43 /proc/332/fd/4 -> /run/rpcbind.lock
$ ls -l /proc/324/fd/
total 0
lrwx------ 1 root root 64 Feb 27 14:50 0 -> /dev/pts/0
lrwx------ 1 root root 64 Feb 27 14:50 1 -> /dev/pts/0
lrwx------ 1 root root 64 Feb 27 14:49 2 -> /dev/pts/0
You can see that the process with the 324 pid doesn't hold the lock.
This information is required for proper dumping and restoring file
locks.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During the v3.20/v4.0 cycle, I had originally had the code manage the
inode->i_flctx pointer using a compare-and-swap operation instead of the
i_lock.
Sasha Levin though hit a problem while testing with trinity that made me
believe that that wasn't safe. At the time, changing the code to protect
the i_flctx pointer seemed to fix the issue, but I now think that was
just coincidence.
The issue was likely the same race that Kirill Shutemov hit while
testing the pre-rc1 v4.0 kernel and that Linus spotted. Due to the way
that the spinlock was dropped in the middle of flock_lock_file, you
could end up with multiple flock locks for the same struct file on the
inode.
Reinstate the use of a CAS operation to assign this pointer since it's
likely to be more efficient and gets the i_lock completely out of the
file locking business.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
As Bruce points out, there's no compelling reason to change /proc/locks
output at this point. If we did want to do this, then we'd almost
certainly want to introduce a new file to display this info (maybe via
debugfs?).
Let's remove the dead WE_CAN_BREAK_LSLK_NOW ifdef here and just plan to
stay with the legacy format.
Reported-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
The current prototypes for these operations are somewhat awkward as they
deal with fl_owners but take struct file_lock arguments. In the future,
we'll want to be able to take references without necessarily dealing
with a struct file_lock.
Change them to take fl_owner_t arguments instead and have the callers
deal with assigning the values to the file_lock structs.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
In the event that we get an F_UNLCK request on an inode that has no lock
context, there is no reason to allocate one. Change
locks_get_lock_context to take a "type" pointer and avoid allocating a
new context if it's F_UNLCK.
Then, fix the callers to return appropriately if that function returns
NULL.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Annonate insert, remove and iterate function that we need
blocked_lock_lock held.
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
We know that the locks being passed into this function are of the
correct type, now that they live on their own lists.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Since following change
commit bd61e0a9c8
Author: Jeff Layton <jlayton@primarydata.com>
Date: Fri Jan 16 15:05:55 2015 -0500
locks: convert posix locks to file_lock_context
all Posix locks are kept on their a separate list, so the test is
redudant.
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Cc: Jeff Layton <jlayton@primarydata.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
locks_delete_lock_ctx() is called inside the loop, so we
should use list_for_each_entry_safe.
Fixes: 8634b51f6c (locks: convert lease handling to file_lock_context)
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
It's possible that "fl" won't point at a valid lock at this point, so
use "victim" instead which is either a valid lock or NULL.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Commit 8634b51f6c (locks: convert lease handling to file_lock_context)
introduced a regression in the handling of lease upgrade/downgrades.
In the event that we already have a lease on a file and are going to
either upgrade or downgrade it, we skip doing any list insertion or
deletion and simply re-call lm_setup on the existing lease.
As of commit 8634b51f6c however, we end up calling lm_setup on the
lease that was passed in, instead of on the existing lease. This causes
us to leak the fasync_struct that was allocated in the event that there
was not already an existing one (as it always appeared that there
wasn't one).
Fixes: 8634b51f6c (locks: convert lease handling to file_lock_context)
Reported-and-Tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
In the case where we're splitting a lock in two, the current code
the new "left" lock in the incorrect spot. It's inserted just
before "right" when it should instead be inserted just before the
new lock.
When we add a new lock, set "fl" to that value so that we can
add "left" before it.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
As Linus pointed out:
Say we have an existing flock, and now do a new one that conflicts. I
see what looks like three separate bugs.
- We go through the first loop, find a lock of another type, and
delete it in preparation for replacing it
- we *drop* the lock context spinlock.
- BUG #1? So now there is no lock at all, and somebody can come in
and see that unlocked state. Is that really valid?
- another thread comes in while the first thread dropped the lock
context lock, and wants to add its own lock. It doesn't see the
deleted or pending locks, so it just adds it
- the first thread gets the context spinlock again, and adds the lock
that replaced the original
- BUG #2? So now there are *two* locks on the thing, and the next
time you do an unlock (or when you close the file), it will only
remove/replace the first one.
...remove the "drop the spinlock" code in the middle of this function as
it has always been suspicious. This should eliminate the potential race
that can leave two locks for the same struct file on the list.
He also pointed out another thing as a bug -- namely that you
flock_lock_file removes the lock from the list unconditionally when
doing a lock upgrade, without knowing whether it'll be able to set the
new lock. Bruce pointed out that this is expected behavior and may help
prevent certain deadlock situations.
We may want to revisit that at some point, but it's probably best that
we do so in the context of a different patchset.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
This reverts commit 9bd0f45b70.
Linus rightly pointed out that I failed to initialize the counters
when adding them, so they don't work as expected. Just revert this
patch for now.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
This (ab-)uses the file locking code to allow filesystems to recall
outstanding pNFS layouts on a file. This new lease type is similar but
not quite the same as FL_DELEG. A FL_LAYOUT lease can always be granted,
an a per-filesystem lock (XFS iolock for the initial implementation)
ensures not FL_LAYOUT leases granted when we would need to recall them.
Also included are changes that allow multiple outstanding read
leases of different types on the same file as long as they have a
differnt owner. This wasn't a problem until now as nfsd never set
FL_LEASE leases, and no one else used FL_DELEG leases, but given that
nfsd will also issues FL_LAYOUT leases we will have to handle it now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Just like for other lock types we should allow different owners to have
a read lease on a file. Currently this can't happen, but with the addition
of pNFS layout leases we'll need this feature.
Signed-off-by: Christoph Hellwig <hch@lst.de>
We have each of the locks_remove_* variants doing this individually.
Have the caller do it instead, and have locks_remove_flock and
locks_remove_lease just assume that it's a valid pointer.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
This makes things a bit more efficient in the cifs and ceph lock
pushing code.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Now that we use standard list_heads for tracking leases, we can have
lm_change take a pointer to the lease to be modified instead of a
double pointer.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Acked-by: Christoph Hellwig <hch@lst.de>
We can now add a dedicated spinlock without expanding struct inode.
Change to using that to protect the various i_flctx lists.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Acked-by: Christoph Hellwig <hch@lst.de>
The current scheme of using the i_flock list is really difficult to
manage. There is also a legitimate desire for a per-inode spinlock to
manage these lists that isn't the i_lock.
Start conversion to a new scheme to eventually replace the old i_flock
list with a new "file_lock_context" object.
We start by adding a new i_flctx to struct inode. For now, it lives in
parallel with i_flock list, but will eventually replace it. The idea is
to allocate a structure to sit in that pointer and act as a locus for
all things file locking.
We allocate a file_lock_context for an inode when the first lock is
added to it, and it's only freed when the inode is freed. We use the
i_lock to protect the assignment, but afterward it should mostly be
accessed locklessly.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Acked-by: Christoph Hellwig <hch@lst.de>
...instead of open-coding it and removing flock locks directly. This
helps consolidate the flock lock removal logic into a single spot.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
...that we can use to queue file_locks to per-ctx list_heads. Go ahead
and convert locks_delete_lock and locks_dispose_list to use it instead
of the fl_block list.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Acked-by: Christoph Hellwig <hch@lst.de>
commit 0efaa7e82f
locks: generic_delete_lease doesn't need a file_lock at all
moves the call to fl->fl_lmops->lm_change() to a place in the
code where fl might be a non-lease lock.
When that happens, fl_lmops is NULL and an Oops ensures.
So add an extra test to restore correct functioning.
Reported-by: Linda Walsh <suse@tlinx.org>
Link: https://bugzilla.suse.com/show_bug.cgi?id=912569
Cc: stable@vger.kernel.org (v3.18)
Fixes: 0efaa7e82f
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Like flock locks, leases are owned by the file description. Now that the
i_have_this_lease check in __break_lease is gone, we don't actually use
the fl_owner for leases for anything. So, it's now safe to set this more
appropriately to the same value as the fl_file.
While we're at it, fix up the comments over the fl_owner_t definition
since they're rather out of date.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Christoph suggests:
"Add a return value to lm_break so that the lock manager can tell the
core code "you can delete this lease right now". That gets rid of
the games with the timeout which require all kinds of race avoidance
code in the users."
Do that here and have the nfsd lease break routine use it when it detects
that there was a race between setting up the lease and it being broken.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Eliminate an unneeded "flock" variable. We can use "fl" as a loop cursor
everywhere. Add a any_leases_conflict helper function as well to
consolidate a bit of code.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
I think that the intent of this code was to ensure that a process won't
deadlock if it has one fd open with a lease on it and then breaks that
lease by opening another fd. In that case it'll treat the __break_lease
call as if it were non-blocking.
This seems wrong -- the process could (for instance) be multithreaded
and managing different fds via different threads. I also don't see any
mention of this limitation in the (somewhat sketchy) documentation.
Remove the check and the non-blocking behavior when i_have_this_lease
is true.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
There was only one place where we still could free a file_lock while
holding the i_lock -- lease_modify. Add a new list_head argument to the
lm_change operation, pass in a private list when calling it, and fix
those callers to dispose of the list once the lock has been dropped.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we have a saner internal API for managing leases, we no longer
need to mandate that the inode->i_lock be held over most of the lease
code. Push it down into generic_add_lease and generic_delete_lease.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
...and move the fasync setup into it for fcntl lease calls. At the same
time, change the semantics of how the file_lock double-pointer is
handled. Up until now, on a successful lease return you got a pointer to
the lock on the list. This is bad, since that pointer can no longer be
relied on as valid once the inode->i_lock has been released.
Change the code to instead just zero out the pointer if the lease we
passed in ended up being used. Then the callers can just check to see
if it's NULL after the call and free it if it isn't.
The priv argument has the same semantics. The lm_setup function can
zero the pointer out to signal to the caller that it should not be
freed after the function returns.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In later patches, we're going to add a new lock_manager_operation to
finish setting up the lease while still holding the i_lock. To do
this, we'll need to pass a little bit of info in the fcntl setlease
case (primarily an fasync structure). Plumb the extra pointer into
there in advance of that.
We declare this pointer as a void ** to make it clear that this is
private info, and that the caller isn't required to set this unless
the lm_setup specifically requires it.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Some of the latter paragraphs seem ambiguous and just plain wrong.
In particular the break_lease comment makes no sense. We call
break_lease (and break_deleg) from all sorts of vfs-layer functions,
so there is clearly such a method.
Also get rid of some of the other comments about what's needed for
a full implementation.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Ensure that it's OK to pass in a NULL file_lock double pointer on
a F_UNLCK request and convert the vfs_setlease F_UNLCK callers to
do just that.
Finally, turn the BUG_ON in generic_setlease into a WARN_ON_ONCE
with an error return. That's a problem we can handle without
crashing the box if it occurs.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
lease_get_mtime is called without the i_lock held, so there's no
guarantee about the stability of the list. Between the time when we
assign "flock" and then dereference it to check whether it's a lease
and for write, the lease could be freed.
Ensure that that doesn't occur by taking the i_lock before trying
to check the lease.
Cc: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
security_file_set_fowner always returns 0, so make it f_setown and
__f_setown void return functions and fix up the error handling in the
callers.
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Commit d5b9026a67 ([PATCH] knfsd: locks: flag NFSv4-owned locks) using
fl_lmops field in file_lock for checking nfsd4 lockowner.
But, commit 1a747ee0cc (locks: don't call ->copy_lock methods on return
of conflicting locks) causes the fl_lmops of conflock always be NULL.
Also, commit 0996905f93 (lockd: posix_test_lock() should not call
locks_copy_lock()) caused the fl_lmops of conflock always be NULL too.
Make sure copy the private information by fl_copy_lock() in struct
file_lock_operations, merge __locks_copy_lock() to fl_copy_lock().
Jeff advice, "Set fl_lmops on conflocks, but don't set fl_ops.
fl_ops are superfluous, since they are callbacks into the filesystem.
There should be no need to bother the filesystem at all with info
in a conflock. But, lock _ownership_ matters for conflocks and that's
indicated by the fl_lmops. So you really do want to copy the fl_lmops
for conflocks I think."
v5: add missing calling of locks_release_private() in nlmsvc_testlock()
v4: only copy fl_lmops for conflock, don't copy fl_ops
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
NFSD or other lockmanager may increase the owner's reference,
so adds two new options for copying and releasing owner.
v5: change order from 2/6 to 3/6
v4: rename lm_copy_owner/lm_release_owner to lm_get_owner/lm_put_owner
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Jeff advice, " Right now __locks_copy_lock is only used to copy
conflocks. It would be good to rename that to something more
distinct (i.e.locks_copy_conflock), to make it clear that we're
generating a conflock there."
v5: change order from 3/6 to 2/6
v4: new patch only renaming function name
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
The argument to locks_unlink_lock can't be just any pointer to a
pointer. It must be a pointer to the fl_next field in the previous
lock in the list.
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There's no need to call locks_free_lock here while still holding the
i_lock. Defer that until the lock has been dropped.
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
In commit 72f98e7255 (locks: turn lock_flocks into a spinlock), we
moved from using the BKL to a global spinlock. With this change, we lost
the ability to block in the fl_release_private operation.
This is problematic for NFS (and probably some other filesystems as
well). Add a new list_head argument to locks_delete_lock. If that
argument is non-NULL, then queue any locks that we want to free to the
list instead of freeing them.
Then, add a new locks_dispose_list function that will walk such a list
and call locks_free_lock on them after the i_lock has been dropped.
Finally, change all of the callers of locks_delete_lock to pass in a
list_head, except for lease_modify. That function can be called long
after the i_lock has been acquired. Deferring the freeing of a lease
after unlocking it in that function is non-trivial until we overhaul
some of the spinlocking in the lease code.
Currently though, no filesystem that sets fl_release_private supports
leases, so this is not currently a problem. We'll eventually want to
make the same change in the lease code, but it needs a lot more work
before we can reasonably do so.
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Currently in the case where a new file lock completely replaces the old
one, we end up overwriting the existing lock with the new info. This
means that we have to call fl_release_private inside i_lock. Change the
code to instead copy the info to new_fl, insert that lock into the
correct spot and then delete the old lock. In a later patch, we'll defer
the freeing of the old lock until after the i_lock has been dropped.
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
All callers of locks_copy_lock pass in a brand new file_lock struct, so
there's no need to call locks_release_private on it. Replace that with
a warning that fires in the event that we receive a target lock that
doesn't look like it's properly initialized.
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Now that they are a distinct lease type, show them as such.
Cc: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
This fixes a regression due to commit 130d1f956a (locks: ensure that
fl_owner is always initialized properly in flock and lease codepaths). I
had mistakenly thought that the fl_owner wasn't used in the lease code,
but I missed the place in __break_lease that does use it.
The i_have_this_lease check in generic_add_lease uses it. While I'm not
sure that check is terribly helpful [1], reset it back to using
current->files in order to ensure that there's no behavior change here.
[1]: leases are owned by the file description. It's possible that this
is a threaded program, and the lease breaker and the task that
would handle the signal are different, even if they have the same
file table. So, there is the potential for false positives with
this check.
Fixes: 130d1f956a (locks: ensure that fl_owner is always initialized properly in flock and lease codepaths)
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
v2: add a __break_lease tracepoint for non-blocking case
Recently, I needed these to help track down a softlockup when recalling a
delegation, but they might be helpful in other situations as well.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Replace seq_printf where possible
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Currently, the fl_owner isn't set for flock locks. Some filesystems use
byte-range locks to simulate flock locks and there is a common idiom in
those that does:
fl->fl_owner = (fl_owner_t)filp;
fl->fl_start = 0;
fl->fl_end = OFFSET_MAX;
Since flock locks are generally "owned" by the open file description,
move this into the common flock lock setup code. The fl_start and fl_end
fields are already set appropriately, so remove the unneeded setting of
that in flock ops in those filesystems as well.
Finally, the lease code also sets the fl_owner as if they were owned by
the process and not the open file description. This is incorrect as
leases have the same ownership semantics as flock locks. Set them the
same way. The lease code doesn't actually use the fl_owner value for
anything, so this is more for consistency's sake than a bugfix.
Reported-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (Staging portion)
Acked-by: J. Bruce Fields <bfields@fieldses.org>
v2: replace missing break in switch statement (as pointed out by Dave
Jones)
commit bce7560d49 (locks: consolidate checks for compatible
filp->f_mode values in setlk handlers) introduced a regression in the
F_GETLK handler.
flock64_to_posix_lock is a shared codepath between F_GETLK and F_SETLK,
but the f_mode checks should only be applicable to the F_SETLK codepaths
according to POSIX.
Instead of just reverting the patch, add a new function to do this
checking and have the F_SETLK handlers call it.
Cc: Dave Jones <davej@redhat.com>
Reported-and-Tested-by: Reuben Farrelly <reuben@reub.net>
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
File-private locks have been re-christened as "open file description"
locks. Finish the symbol name cleanup in the internal implementation.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
File-private locks have been merged into Linux for v3.15, and *now*
people are commenting that the name and macro definitions for the new
file-private locks suck.
...and I can't even disagree. The names and command macros do suck.
We're going to have to live with these for a long time, so it's
important that we be happy with the names before we're stuck with them.
The consensus on the lists so far is that they should be rechristened as
"open file description locks".
The name isn't a big deal for the kernel, but the command macros are not
visually distinct enough from the traditional POSIX lock macros. The
glibc and documentation folks are recommending that we change them to
look like F_OFD_{GETLK|SETLK|SETLKW}. That lessens the chance that a
programmer will typo one of the commands wrong, and also makes it easier
to spot this difference when reading code.
This patch makes the following changes that I think are necessary before
v3.15 ships:
1) rename the command macros to their new names. These end up in the uapi
headers and so are part of the external-facing API. It turns out that
glibc doesn't actually use the fcntl.h uapi header, but it's hard to
be sure that something else won't. Changing it now is safest.
2) make the the /proc/locks output display these as type "OFDLCK"
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Carlos O'Donell <carlos@redhat.com>
Cc: Stefan Metzmacher <metze@samba.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Frank Filz <ffilzlnx@mindspring.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
A fl->fl_break_time of 0 has a special meaning to the lease break code
that basically means "never break the lease". knfsd uses this to ensure
that leases don't disappear out from under it.
Unfortunately, the code in __break_lease can end up passing this value
to wait_event_interruptible as a timeout, which prevents it from going
to sleep at all. This makes __break_lease to spin in a tight loop and
causes soft lockups.
Fix this by ensuring that we pass a minimum value of 1 as a timeout
instead.
Cc: <stable@vger.kernel.org>
Cc: J. Bruce Fields <bfields@fieldses.org>
Reported-by: Terry Barnaby <terry1@beam.ltd.uk>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Allow locks_mandatory_area() to handle file-private locks correctly.
If there is a file-private lock set on an open file and we're doing I/O
via the same, then that should not cause anything to block.
Handle this by first doing a non-blocking FL_ACCESS check for a
file-private lock, and then fall back to checking for a classic POSIX
lock (and possibly blocking).
Note that this approach is subject to the same races that have always
plagued mandatory locking on Linux.
Reported-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
As Trond pointed out, you can currently deadlock yourself by setting a
file-private lock on a file that requires mandatory locking and then
trying to do I/O on it.
Avoid this problem by plumbing some knowledge of file-private locks into
the mandatory locking code. In order to do this, we must pass down
information about the struct file that's being used to
locks_verify_locked.
Reported-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Neil Brown suggested potentially overloading the l_pid value as a "lock
context" field for file-private locks. While I don't think we will
probably want to do that here, it's probably a good idea to ensure that
in the future we could extend this API without breaking existing
callers.
Typically the l_pid value is ignored for incoming struct flock
arguments, serving mainly as a place to return the pid of the owner if
there is a conflicting lock. For file-private locks, require that it
currently be set to 0 and return EINVAL if it isn't. If we eventually
want to make a non-zero l_pid mean something, then this will help ensure
that we don't break legacy programs that are using file-private locks.
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Due to some unfortunate history, POSIX locks have very strange and
unhelpful semantics. The thing that usually catches people by surprise
is that they are dropped whenever the process closes any file descriptor
associated with the inode.
This is extremely problematic for people developing file servers that
need to implement byte-range locks. Developers often need a "lock
management" facility to ensure that file descriptors are not closed
until all of the locks associated with the inode are finished.
Additionally, "classic" POSIX locks are owned by the process. Locks
taken between threads within the same process won't conflict with one
another, which renders them useless for synchronization between threads.
This patchset adds a new type of lock that attempts to address these
issues. These locks conflict with classic POSIX read/write locks, but
have semantics that are more like BSD locks with respect to inheritance
and behavior on close.
This is implemented primarily by changing how fl_owner field is set for
these locks. Instead of having them owned by the files_struct of the
process, they are instead owned by the filp on which they were acquired.
Thus, they are inherited across fork() and are only released when the
last reference to a filp is put.
These new semantics prevent them from being merged with classic POSIX
locks, even if they are acquired by the same process. These locks will
also conflict with classic POSIX locks even if they are acquired by
the same process or on the same file descriptor.
The new locks are managed using a new set of cmd values to the fcntl()
syscall. The initial implementation of this converts these values to
"classic" cmd values at a fairly high level, and the details are not
exposed to the underlying filesystem. We may eventually want to push
this handing out to the lower filesystem code but for now I don't
see any need for it.
Also, note that with this implementation the new cmd values are only
available via fcntl64() on 32-bit arches. There's little need to
add support for legacy apps on a new interface like this.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
It's not really feasible to do deadlock detection with FL_FILE_PVT
locks since they aren't owned by a single task, per-se. Deadlock
detection also tends to be rather expensive so just skip it for
these sorts of locks.
Also, add a FIXME comment about adding more limited deadlock detection
that just applies to ro -> rw upgrades, per Andy's request.
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Once we introduce file private locks, we'll need to know what cmd value
was used, as that affects the ownership and whether a conflict would
arise.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
FL_FILE_PVT locks are no longer tied to a particular pid, and are
instead inheritable by child processes. Report a l_pid of '-1' for
these sorts of locks since the pid is somewhat meaningless for them.
This precedent comes from FreeBSD. There, POSIX and flock() locks can
conflict with one another. If fcntl(F_GETLK, ...) returns a lock set
with flock() then the l_pid member cannot be a process ID because the
lock is not held by a process as such.
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
In a later patch, we'll be adding a new type of lock that's owned by
the struct file instead of the files_struct. Those sorts of locks
will be flagged with a new FL_FILE_PVT flag.
Report these types of locks as "FLPVT" in /proc/locks to distinguish
them from "classic" POSIX locks.
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
This function currently removes leases in addition to flock locks and in
a later patch we'll have it deal with file-private locks too. Rename it
to locks_remove_file to indicate that it removes locks that are
associated with a particular struct file, and not just flock locks.
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Move this check into flock64_to_posix_lock instead of duplicating it in
two places. This also fixes a minor wart in the code where we continue
referring to the struct flock after converting it to struct file_lock.
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
In the 32-bit case fcntl assigns the 64-bit f_pos and i_size to a 32-bit
off_t.
The existing range checks also seem to depend on signed arithmetic
wrapping when it overflows. In practice maybe that works, but we can be
more careful. That also allows us to make a more reliable distinction
between -EINVAL and -EOVERFLOW.
Note that in the 32-bit case SEEK_CUR or SEEK_END might allow the caller
to set a lock with starting point no longer representable as a 32-bit
value. We could return -EOVERFLOW in such cases, but the locks code is
capable of handling such ranges, so we choose to be lenient here. The
only problem is that subsequent GETLK calls on such a lock will fail
with EOVERFLOW.
While we're here, do some cleanup including consolidating code for the
flock and flock64 cases.
Signed-off-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
A leftover lock on the list is surely a sign of a problem of some sort,
but it's not necessarily a reason to panic the box. Instead, just log a
warning with some info about the lock, and then delete it like we would
any other lock.
In the event that the filesystem declares a ->lock f_op, we may end up
leaking something, but that's generally preferable to an immediate
panic.
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
It's best to let the compiler decide that.
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
As Al Viro points out, there is an unlikely, but possible race between
opening a file and setting a lease on it. generic_add_lease is done with
the i_lock held, but the inode->i_flock check in break_lease is
lockless. It's possible for another task doing an open to do the entire
pathwalk and call break_lease between the point where generic_add_lease
checks for a conflicting open and adds the lease to the list. If this
occurs, we can end up with a lease set on the file with a conflicting
open.
To guard against that, check again for a conflicting open after adding
the lease to the i_flock list. If the above race occurs, then we can
simply unwind the lease setting and return -EAGAIN.
Because we take dentry references and acquire write access on the file
before calling break_lease, we know that if the i_flock list is empty
when the open caller goes to check it then the necessary refcounts have
already been incremented. Thus the additional check for a conflicting
open will see that there is one and the setlease call will fail.
Cc: Bruce Fields <bfields@fieldses.org>
Cc: David Howells <dhowells@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@fieldses.org>
