Fix warning:
drivers/rtc/rtc-ds1374.c: In function ‘ds1374_wdt_disable’:
drivers/rtc/rtc-ds1374.c:442:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
Link: https://lore.kernel.org/r/20191122102212.400158-3-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fix undocumented function parameters:
drivers/rtc/sysfs.c:112: warning: Function parameter or member 'dev' not described in 'hctosys_show'
drivers/rtc/sysfs.c:112: warning: Function parameter or member 'attr' not described in 'hctosys_show'
drivers/rtc/sysfs.c:112: warning: Function parameter or member 'buf' not described in 'hctosys_show'
Link: https://lore.kernel.org/r/20191122102212.400158-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fix kerneldoc warnings:
drivers/rtc/interface.c:619: warning: Function parameter or member 'num' not described in 'rtc_handle_legacy_irq'
drivers/rtc/interface.c:619: warning: Function parameter or member 'mode' not described in 'rtc_handle_legacy_irq'
drivers/rtc/interface.c:804: warning: Function parameter or member 'rtc' not described in 'rtc_timer_enqueue'
drivers/rtc/interface.c:804: warning: Function parameter or member 'timer' not described in 'rtc_timer_enqueue'
drivers/rtc/interface.c:864: warning: Function parameter or member 'rtc' not described in 'rtc_timer_remove'
drivers/rtc/interface.c:864: warning: Function parameter or member 'timer' not described in 'rtc_timer_remove'
drivers/rtc/interface.c:900: warning: Function parameter or member 'work' not described in 'rtc_timer_do_work'
drivers/rtc/interface.c:1035: warning: Function parameter or member 'rtc' not described in 'rtc_read_offset'
drivers/rtc/interface.c:1035: warning: Function parameter or member 'offset' not described in 'rtc_read_offset'
drivers/rtc/interface.c:1070: warning: Function parameter or member 'rtc' not described in 'rtc_set_offset'
drivers/rtc/interface.c:1070: warning: Function parameter or member 'offset' not described in 'rtc_set_offset'
Link: https://lore.kernel.org/r/20191127082932.666869-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The msm6242_set()/msm6242_clear() functions are used when writing to Control
Register D to set or clear the HOLD bit when reading the current time from
the RTC.
Doing this with a read-modify-write cycle will potentially clear an
interrupt condition which occurs between the read and the write.
The datasheet states the following about this:
When writing the HOLD or 30 second adjust bits of register D, it is
necessary to write the IRQ FLAG bit to a "1".
Since the only other bits in the register are the 30 second adjust bit
(which is not used) and the BUSY bit (which is read-only), the
read-modify-write cycle can be replaced by a simple write with the IRQ FLAG
bit set to 1 and the other bits (except HOLD) set to 0.
Tested-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Link: https://lore.kernel.org/r/20191116114620.9193-1-jongk@linux-m68k.org
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver was reading the wrong register as the 10-hour digit due to
a misplaced ')'. It was in fact reading the 1-second digit register due
to this bug.
Also remove the use of a magic number for the hour mask and use the define
for it which was already present.
Fixes: 4f9b9bba1d ("rtc: Add an RTC driver for the Oki MSM6242")
Tested-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Link: https://lore.kernel.org/r/20191116110548.8562-1-jongk@linux-m68k.org
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
If tps65910 INT1 pin (IRQ output) is not wired to any IRQ controller,
then it can't be used as system wakeup/alarm source,
but it is still possible to read/write time from/to RTC.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/20191116203748.27166-1-andrej.skvortzov@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The Flextimer alarm is primarily used as a wakeup source for system
power management. But it shouldn't select the power management driver
as they don't really have dependency of each other.
Also remove the default y as it is not a critical feature for the
systems.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/1573252856-11759-1-git-send-email-leoyang.li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When using following operations:
date -s "21190910 19:20:00"
hwclock -w
to change date from 2019 to 2119 for test, it will fail on Hygon
Dhyana and AMD Zen CPUs, while the same operations run ok on Intel i7
platform.
MC146818 driver use function mc146818_set_time() to set register
RTC_FREQ_SELECT(RTC_REG_A)'s bit4-bit6 field which means divider stage
reset value on Intel platform to 0x7.
While AMD/Hygon RTC_REG_A(0Ah)'s bit4 is defined as DV0 [Reference]:
DV0 = 0 selects Bank 0, DV0 = 1 selects Bank 1. Bit5-bit6 is defined
as reserved.
DV0 is set to 1, it will select Bank 1, which will disable AltCentury
register(0x32) access. As UEFI pass acpi_gbl_FADT.century 0x32
(AltCentury), the CMOS write will be failed on code:
CMOS_WRITE(century, acpi_gbl_FADT.century).
Correct RTC_REG_A bank select bit(DV0) to 0 on AMD/Hygon CPUs, it will
enable AltCentury(0x32) register writing and finally setup century as
expected.
Test results on Intel i7, AMD EPYC(17h) and Hygon machine show that it
works as expected.
Compiling for sparc64 and alpha architectures are passed.
Reference:
https://www.amd.com/system/files/TechDocs/51192_Bolton_FCH_RRG.pdf
section: 3.13 Real Time Clock (RTC)
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jinke Fan <fanjinke@hygon.cn>
Link: https://lore.kernel.org/r/20191105083943.115320-1-fanjinke@hygon.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The module alias platform tag contains a spelling mistake. Fix it.
Fixes: f33506abbcdd ("rtc: bd70528: Add MODULE ALIAS to autoload module")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20191106083418.159045-1-colin.king@canonical.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The bd70528 RTC driver is probed by MFD driver. Add MODULE_ALIAS
in order to allow udev to load the module when MFD sub-device cell
for RTC is added.
I'm not sure if this is a bugfix or feature addition but I guess
fixes tag won't harm in this case.
Fixes: 32a4a4ebf7 ("rtc: bd70528: Initial support for ROHM bd70528 RTC")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20191023114711.GA13954@localhost.localdomain
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The RTC month value is 1-indexed, but the kernel assumes it is 0-indexed.
This may result in the RTC not rolling over correctly.
Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Link: https://lore.kernel.org/r/20191101095422.14787-1-ilya@compulab.co.il
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This driver forgets to disable and unprepare clock when remove.
Add a call to clk_disable_unprepare to fix it.
Fixes: c4f07ecee2 ("rtc: brcmstb-waketimer: Add Broadcom STB wake-timer")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20191105160043.20018-1-hslester96@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The RTC core now has error messages in case of registration failure, there
is no need to have other messages in the drivers.
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20191016201414.30934-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
dpm_sysfs_remove() and device_pm_remove() are already called by
device_del() on device removal so there is no need to call
device_init_wakeup(dev, false) from the driver and it allows to remove the
.remove callback.
Link: https://lore.kernel.org/r/20191021155806.3625-3-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
dpm_sysfs_remove() and device_pm_remove() are already called by
device_del() on device removal so there is no need to call
device_init_wakeup(dev, false) from the driver and it allows to remove the
.remove callback.
Link: https://lore.kernel.org/r/20191021155806.3625-4-alexandre.belloni@bootlin.com
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
dpm_sysfs_remove() and device_pm_remove() are already called by
device_del() on device removal so there is no need to call
device_init_wakeup(dev, false) from the driver and it allows to remove the
.remove callback.
Link: https://lore.kernel.org/r/20191021155806.3625-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
dpm_sysfs_remove() and device_pm_remove() are already called by
device_del() on device removal so there is no need to call
device_init_wakeup(dev, false) from the driver and it allows to remove the
.remove callback.
Link: https://lore.kernel.org/r/20191021155806.3625-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When setting the time in the future with the uie timer enabled,
rtc_timer_do_work will loop for a while because the expiration of the uie
timer was way before the current RTC time and a new timer will be enqueued
until the current rtc time is reached.
If the uie timer is enabled, disable it before setting the time and enable
it after expiring current timers (which may actually be an alarm).
This is the safest thing to do to ensure the uie timer is still
synchronized with the RTC, especially in the UIE emulation case.
Reported-by: syzbot+08116743f8ad6f9a6de7@syzkaller.appspotmail.com
Fixes: 6610e0893b ("RTC: Rework RTC code to use timerqueue for events")
Link: https://lore.kernel.org/r/20191020231320.8191-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Linux should handle when the pcf2127 watchdog feature is enabled by the
bootloader. This is done by checking the watchdog timer value during
init, and set the WDOG_HW_RUNNING flag if the value differs from zero.
Signed-off-by: Martin Hundebøll <martin@geanix.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191021080838.2789-1-martin@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
rv3028 provides clkout (enabled by default). Add clkout
to clock framework source and control from device tree for
variable frequency with enable and disable functionality.
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Link: https://lore.kernel.org/r/20191018100425.1687979-1-pn@denx.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
It is not necessary to call device_init_wakeup(dev, false) in .remove as
device_del will take care of that. It is also not necessary to
devm_free_irq. Finally, dev_pm_clear_wake_irq can be called
unconditionally.
Link: https://lore.kernel.org/r/20191019204941.6203-9-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Rework the interrupt handling to avoid caching the values as the core is
already doing that. The core also always ensures the rtc_time passed for
the alarm is fully populated.
The only trick is in read_alarm where status needs to be read before the
alarm registers to ensure the potential irq is not cleared.
Link: https://lore.kernel.org/r/20191019204941.6203-8-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
SGI Octane (IP30) doesn't have RTC register directly mapped into CPU
address space, but accesses RTC registers with an address and data
register. This is now supported by additional access functions, which
are selected by a new field in platform data. Removed plat_read/plat_write
since there is no user and their usage could introduce lifetime issue,
when functions are placed in different modules.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Acked-by: Joshua Kinard <kumba@gentoo.org>
Reviewed-by: Joshua Kinard <kumba@gentoo.org>
Link: https://lore.kernel.org/r/20191014214621.25257-1-tbogendoerfer@suse.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
A few of the fields in struct ds1685_priv aren't needed at all,
so we can remove it.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Acked-by: Joshua Kinard <kumba@gentoo.org>
Link: https://lore.kernel.org/r/20191011150546.9186-1-tbogendoerfer@suse.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
