The workaround of reading all messages until an invalid is received is a
way of forcing the CHG line high, which means that when using
edge-triggered interrupts the interrupt can be acquired.
With level-triggered interrupts the workaround is unnecessary.
Also, most recent maXTouch chips have a feature called RETRIGEN which, when
enabled, reasserts the interrupt line every cycle if there are messages
waiting. This also makes the workaround unnecessary.
Note: the RETRIGEN feature is only in some firmware versions/chips, it's
not valid simply to enable the bit.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
(cherry picked from ndyer/linux/for-upstream commit 1ae4e8281e491b22442cd5acdfca1862555f8ecb)
[gdavis: Fix conflicts due to v4.6-rc7 commit eb43335c40 ("Input:
atmel_mxt_ts - use mxt_acquire_irq in mxt_soft_reset").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
[jiada: reset use_retrigen_workaround at beginning of mxt_check_retrigen()
call mxt_check_retrigen() after mxt_acquire_irq() in mxt_initialize()
replace white-spaces with tab for MXT_COMMS_RETRIGEN
Changed to check if IRQ is level type]
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Link: https://lore.kernel.org/r/20200727151637.23810-1-jiada_wang@mentor.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When I cat some module parameters by sysfs, it displays as follows. It's
better to add a newline for easy reading.
root@syzkaller:~# cat /sys/module/ati_remote2/parameters/mode_mask
0x1froot@syzkaller:~# cat /sys/module/ati_remote2/parameters/channel_mask
0xffffroot@syzkaller:~#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20200720092148.9320-1-wangxiongfeng2@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When I cat parameter 'proto' by sysfs, it displays as follows. It's
better to add a newline for easy reading.
root@syzkaller:~# cat /sys/module/psmouse/parameters/proto
autoroot@syzkaller:~#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20200720073846.120724-1-wangxiongfeng2@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Newer controllers (identified as "pattern" version 2) send higher
resolution reports, with 16-bit X and Y coordinates (previous generations
used 12-bit values). These new high resolution reports use report ID of
0x60.
SMbus controllers use the same buffer size for both the new and old
reports, and because of that high resolution reports no longer carry
area of contact data with SMbus.
Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>
Link: https://lore.kernel.org/r/20200710054116.5529-1-jingle.wu@emc.com.tw
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We do not need to constantly re-query pattern ID, we can instead query it
once and then pass to methods that need it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This adds firmware size and page sizes for ic types 0x11, 0x13 and 0x14.
IC 0x14 uses 512-byte firmware page size.
Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Newer ICs with IC type value starting with 0x0D and newer bootloader code
use 128-byte firmware pages. Their bootloader also needs to be switched to
proper mode before executing firmware update.
Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Prepare driver for devices that use different sizes of firmware pages.
Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Extend fetching and parsing parameters of the controllers to devices with
"patterns" above 1 (which currently should be handled in the same fashion
as devices with pattern 1).
Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On older controllers IC type is reported in the 2nd byte of
ETP_I2C_OSM_VERSION_CMD, however if controller's firmware is not flashed
correctly it may return incorrect data. Fortunately there is also
ETP_I2C_IAP_VERSION_P0_CMD command that can be used when controller in
either normal or IAP mode, and which is guaranteed to return accurate data,
so let's use it.
Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Not all versions of firmware implement "get pattern" command. When
encountering those assume that the controllers use older pattern.
Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This fixes two finger trackpad scroll on the Lenovo XiaoXin Air 12.
Without nomux, the trackpad behaves as if only one finger is present and
moves the cursor when trying to scroll.
Signed-off-by: David Pedersen <limero1337@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200625133754.291325-1-limero1337@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The variable error is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200603140431.131347-1-colin.king@canonical.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This reverts commit 0617067163 - it turns
out that the resolution of 1 unit per mm was not correct for a number of
touch screens, causing touch sizes to be reported as way too large.
See https://crbug.com/1085648
Reported-by: Harry Cutts <hcutts@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This moves the wakeup increment for elan devices to the touch report.
This prevents the drivers from incorrectly reporting a wakeup when the
resume callback resets then device, which causes an interrupt to
occur.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Link: https://lore.kernel.org/r/20200706235046.1984283-1-dbasehore@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested on my own laptop, touchpad feels slightly more responsive with
this on, though it might just be placebo.
Signed-off-by: Ilya Katsnelson <me@0upti.me>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20200703143457.132373-1-me@0upti.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead, expose the key via the input framework, as SW_MACHINE_COVER
The chip-detect GPIO is actually detecting if the cover is closed.
Technically it's possible to use the SD card with open cover. The
only downside is risk of battery falling out and user being able
to physically remove the card.
The behaviour of SD card not being available when the device is
open is unexpected and creates more problems than it solves. There
is a high chance, that more people accidentally break their rootfs
by opening the case without physically removing the card.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Link: https://lore.kernel.org/r/20200612125402.18393-3-merlijn@wizzup.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This event code represents the state of a removable cover of a device.
Value 0 means that the cover is open or removed, value 1 means that the
cover is closed.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Link: https://lore.kernel.org/r/20200612125402.18393-2-merlijn@wizzup.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Making module name conflicts a fatal error breaks sparc64 allmodconfig:
Error log:
error: the following would cause module name conflict:
drivers/char/adi.ko
drivers/input/joystick/adi.ko
Renaming one of the modules would solve the problem, but then cause other
problems because neither of them is automatically loaded and changing
the name is likely to break any setup that relies on manually loading
it by name.
As there is probably no sparc64 system with this kind of ancient joystick
attached, work around it by adding a Kconfig dependency that forbids
them from both being modules. It is still possible to build the joystick
driver if the sparc64 adi driver is built-in.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200609100643.1245061-1-arnd@arndb.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Yes, staying withing 80 columns is certainly still _preferred_. But
it's not the hard limit that the checkpatch warnings imply, and other
concerns can most certainly dominate.
Increase the default limit to 100 characters. Not because 100
characters is some hard limit either, but that's certainly a "what are
you doing" kind of value and less likely to be about the occasional
slightly longer lines.
Miscellanea:
- to avoid unnecessary whitespace changes in files, checkpatch will no
longer emit a warning about line length when scanning files unless
--strict is also used
- Add a bit to coding-style about alignment to open parenthesis
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Prevent a memory leak in ioperm which was caused by the stupid
assumption that the exit cleanup is always called for current, which is
not the case when fork fails after taking a reference on the ioperm
bitmap.
- Fix an arithmething overflow in the DMA code on 32bit systems
- Fill gaps in the xstate copy with defaults instead of leaving them
uninitialized
- Revert: o"Make __X32_SYSCALL_BIT be unsigned long" as it turned out
that existing user space fails to build.
-----BEGIN PGP SIGNATURE-----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=DmSb
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A pile of x86 fixes:
- Prevent a memory leak in ioperm which was caused by the stupid
assumption that the exit cleanup is always called for current,
which is not the case when fork fails after taking a reference on
the ioperm bitmap.
- Fix an arithmething overflow in the DMA code on 32bit systems
- Fill gaps in the xstate copy with defaults instead of leaving them
uninitialized
- Revert: "Make __X32_SYSCALL_BIT be unsigned long" as it turned out
that existing user space fails to build"
* tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioperm: Prevent a memory leak when fork fails
x86/dma: Fix max PFN arithmetic overflow on 32 bit systems
copy_xstate_to_kernel(): don't leave parts of destination uninitialized
x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"
current->mm check is not reliable as the mm might be temporary
due to use_mm() in a kthread. Check for PF_KTHREAD explictely.
-----BEGIN PGP SIGNATURE-----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=GfbN
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix preventing a crash in NUMA balancing.
The current->mm check is not reliable as the mm might be temporary due
to use_mm() in a kthread. Check for PF_KTHREAD explictly"
* tag 'sched-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Don't NUMA balance for kthreads
Pull networking fixes from David Miller:
"Another week, another set of bug fixes:
1) Fix pskb_pull length in __xfrm_transport_prep(), from Xin Long.
2) Fix double xfrm_state put in esp{4,6}_gro_receive(), also from Xin
Long.
3) Re-arm discovery timer properly in mac80211 mesh code, from Linus
Lüssing.
4) Prevent buffer overflows in nf_conntrack_pptp debug code, from
Pablo Neira Ayuso.
5) Fix race in ktls code between tls_sw_recvmsg() and
tls_decrypt_done(), from Vinay Kumar Yadav.
6) Fix crashes on TCP fallback in MPTCP code, from Paolo Abeni.
7) More validation is necessary of untrusted GSO packets coming from
virtualization devices, from Willem de Bruijn.
8) Fix endianness of bnxt_en firmware message length accesses, from
Edwin Peer.
9) Fix infinite loop in sch_fq_pie, from Davide Caratti.
10) Fix lockdep splat in DSA by setting lockless TX in netdev features
for slave ports, from Vladimir Oltean.
11) Fix suspend/resume crashes in mlx5, from Mark Bloch.
12) Fix use after free in bpf fmod_ret, from Alexei Starovoitov.
13) ARP retransmit timer guard uses wrong offset, from Hongbin Liu.
14) Fix leak in inetdev_init(), from Yang Yingliang.
15) Don't try to use inet hash and unhash in l2tp code, results in
crashes. From Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
l2tp: add sk_family checks to l2tp_validate_socket
l2tp: do not use inet_hash()/inet_unhash()
net: qrtr: Allocate workqueue before kernel_bind
mptcp: remove msk from the token container at destruction time.
mptcp: fix race between MP_JOIN and close
mptcp: fix unblocking connect()
net/sched: act_ct: add nat mangle action only for NAT-conntrack
devinet: fix memleak in inetdev_init()
virtio_vsock: Fix race condition in virtio_transport_recv_pkt
drivers/net/ibmvnic: Update VNIC protocol version reporting
NFC: st21nfca: add missed kfree_skb() in an error path
neigh: fix ARP retransmit timer guard
bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones
bpf, selftests: Verifier bounds tests need to be updated
bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones
bpf: Fix use-after-free in fmod_ret check
net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()
net/mlx5e: Fix MLX5_TC_CT dependencies
net/mlx5e: Properly set default values when disabling adaptive moderation
net/mlx5e: Fix arch depending casting issue in FEC
...
syzbot was able to trigger a crash after using an ISDN socket
and fool l2tp.
Fix this by making sure the UDP socket is of the proper family.
BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
Write of size 1 at addr ffff88808ed0c590 by task syz-executor.5/3018
CPU: 0 PID: 3018 Comm: syz-executor.5 Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x188/0x20d lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:382
__kasan_report.cold+0x20/0x38 mm/kasan/report.c:511
kasan_report+0x33/0x50 mm/kasan/common.c:625
setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
l2tp_tunnel_register+0xb15/0xdd0 net/l2tp/l2tp_core.c:1523
l2tp_nl_cmd_tunnel_create+0x4b2/0xa60 net/l2tp/l2tp_netlink.c:249
genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:718 [inline]
genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735
netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469
genl_rcv+0x24/0x40 net/netlink/genetlink.c:746
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6e6/0x810 net/socket.c:2352
___sys_sendmsg+0x100/0x170 net/socket.c:2406
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2439
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x45ca29
Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007effe76edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004fe1c0 RCX: 000000000045ca29
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 000000000000094e R14: 00000000004d5d00 R15: 00007effe76ee6d4
Allocated by task 3018:
save_stack+0x1b/0x40 mm/kasan/common.c:49
set_track mm/kasan/common.c:57 [inline]
__kasan_kmalloc mm/kasan/common.c:495 [inline]
__kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:468
__do_kmalloc mm/slab.c:3656 [inline]
__kmalloc+0x161/0x7a0 mm/slab.c:3665
kmalloc include/linux/slab.h:560 [inline]
sk_prot_alloc+0x223/0x2f0 net/core/sock.c:1612
sk_alloc+0x36/0x1100 net/core/sock.c:1666
data_sock_create drivers/isdn/mISDN/socket.c:600 [inline]
mISDN_sock_create+0x272/0x400 drivers/isdn/mISDN/socket.c:796
__sock_create+0x3cb/0x730 net/socket.c:1428
sock_create net/socket.c:1479 [inline]
__sys_socket+0xef/0x200 net/socket.c:1521
__do_sys_socket net/socket.c:1530 [inline]
__se_sys_socket net/socket.c:1528 [inline]
__x64_sys_socket+0x6f/0xb0 net/socket.c:1528
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Freed by task 2484:
save_stack+0x1b/0x40 mm/kasan/common.c:49
set_track mm/kasan/common.c:57 [inline]
kasan_set_free_info mm/kasan/common.c:317 [inline]
__kasan_slab_free+0xf7/0x140 mm/kasan/common.c:456
__cache_free mm/slab.c:3426 [inline]
kfree+0x109/0x2b0 mm/slab.c:3757
kvfree+0x42/0x50 mm/util.c:603
__free_fdtable+0x2d/0x70 fs/file.c:31
put_files_struct fs/file.c:420 [inline]
put_files_struct+0x248/0x2e0 fs/file.c:413
exit_files+0x7e/0xa0 fs/file.c:445
do_exit+0xb04/0x2dd0 kernel/exit.c:791
do_group_exit+0x125/0x340 kernel/exit.c:894
get_signal+0x47b/0x24e0 kernel/signal.c:2739
do_signal+0x81/0x2240 arch/x86/kernel/signal.c:784
exit_to_usermode_loop+0x26c/0x360 arch/x86/entry/common.c:161
prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
do_syscall_64+0x6b1/0x7d0 arch/x86/entry/common.c:305
entry_SYSCALL_64_after_hwframe+0x49/0xb3
The buggy address belongs to the object at ffff88808ed0c000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1424 bytes inside of
2048-byte region [ffff88808ed0c000, ffff88808ed0c800)
The buggy address belongs to the page:
page:ffffea00023b4300 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea0002838208 ffffea00015ba288 ffff8880aa000e00
raw: 0000000000000000 ffff88808ed0c000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88808ed0c480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff88808ed0c500: 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88808ed0c580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff88808ed0c600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88808ed0c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 6b9f34239b ("l2tp: fix races in tunnel creation")
Fixes: fd558d186d ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Cc: Guillaume Nault <gnault@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A null pointer dereference in qrtr_ns_data_ready() is seen if a client
opens a qrtr socket before qrtr_ns_init() can bind to the control port.
When the control port is bound, the ENETRESET error will be broadcasted
and clients will close their sockets. This results in DEL_CLIENT
packets being sent to the ns and qrtr_ns_data_ready() being called
without the workqueue being allocated.
Allocate the workqueue before setting sk_data_ready and binding to the
control port. This ensures that the work and workqueue structs are
allocated and initialized before qrtr_ns_data_ready can be called.
Fixes: 0c2204a4ad ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Chris Lew <clew@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni says:
====================
mptcp: a bunch of fixes
This patch series pulls together a few bugfixes for MPTCP bug observed while
doing stress-test with apache bench - forced to use MPTCP and multiple
subflows.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we remote the msk from the token container only
via mptcp_close(). The MPTCP master socket can be destroyed
also via other paths (e.g. if not yet accepted, when shutting
down the listener socket). When we hit the latter scenario,
dangling msk references are left into the token container,
leading to memory corruption and/or UaF.
This change addresses the issue by moving the token removal
into the msk destructor.
Fixes: 79c0949e9a ("mptcp: Add key generation and token tree")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a MP_JOIN subflow completes the 3whs while another
CPU is closing the master msk, we can hit the
following race:
CPU1 CPU2
close()
mptcp_close
subflow_syn_recv_sock
mptcp_token_get_sock
mptcp_finish_join
inet_sk_state_load
mptcp_token_destroy
inet_sk_state_store(TCP_CLOSE)
__mptcp_flush_join_list()
mptcp_sock_graft
list_add_tail
sk_common_release
sock_orphan()
<socket free>
The MP_JOIN socket will be leaked. Additionally we can hit
UaF for the msk 'struct socket' referenced via the 'conn'
field.
This change try to address the issue introducing some
synchronization between the MP_JOIN 3whs and mptcp_close
via the join_list spinlock. If we detect the msk is closing
the MP_JOIN socket is closed, too.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently unblocking connect() on MPTCP sockets fails frequently.
If mptcp_stream_connect() is invoked to complete a previously
attempted unblocking connection, it will still try to create
the first subflow via __mptcp_socket_create(). If the 3whs is
completed and the 'can_ack' flag is already set, the latter
will fail with -EINVAL.
This change addresses the issue checking for pending connect and
delegating the completion to the first subflow. Additionally
do msk addresses and sk_state changes only when needed.
Fixes: 2303f994b3 ("mptcp: Associate MPTCP context with TCP socket")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently add nat mangle action with comparing invert and orig tuple.
It is better to check IPS_NAT_MASK flags first to avoid non necessary
memcmp for non-NAT conntrack.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When devinet_sysctl_register() failed, the memory allocated
in neigh_parms_alloc() should be freed.
Fixes: 20e61da7ff ("ipv4: fail early when creating netdev named all or default")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When client on the host tries to connect(SOCK_STREAM, O_NONBLOCK) to the
server on the guest, there will be a panic on a ThunderX2 (armv8a server):
[ 463.718844] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 463.718848] Mem abort info:
[ 463.718849] ESR = 0x96000044
[ 463.718852] EC = 0x25: DABT (current EL), IL = 32 bits
[ 463.718853] SET = 0, FnV = 0
[ 463.718854] EA = 0, S1PTW = 0
[ 463.718855] Data abort info:
[ 463.718856] ISV = 0, ISS = 0x00000044
[ 463.718857] CM = 0, WnR = 1
[ 463.718859] user pgtable: 4k pages, 48-bit VAs, pgdp=0000008f6f6e9000
[ 463.718861] [0000000000000000] pgd=0000000000000000
[ 463.718866] Internal error: Oops: 96000044 [#1] SMP
[...]
[ 463.718977] CPU: 213 PID: 5040 Comm: vhost-5032 Tainted: G O 5.7.0-rc7+ #139
[ 463.718980] Hardware name: GIGABYTE R281-T91-00/MT91-FS1-00, BIOS F06 09/25/2018
[ 463.718982] pstate: 60400009 (nZCv daif +PAN -UAO)
[ 463.718995] pc : virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common]
[ 463.718999] lr : virtio_transport_recv_pkt+0x1fc/0xd40 [vmw_vsock_virtio_transport_common]
[ 463.719000] sp : ffff80002dbe3c40
[...]
[ 463.719025] Call trace:
[ 463.719030] virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common]
[ 463.719034] vhost_vsock_handle_tx_kick+0x360/0x408 [vhost_vsock]
[ 463.719041] vhost_worker+0x100/0x1a0 [vhost]
[ 463.719048] kthread+0x128/0x130
[ 463.719052] ret_from_fork+0x10/0x18
The race condition is as follows:
Task1 Task2
===== =====
__sock_release virtio_transport_recv_pkt
__vsock_release vsock_find_bound_socket (found sk)
lock_sock_nested
vsock_remove_sock
sock_orphan
sk_set_socket(sk, NULL)
sk->sk_shutdown = SHUTDOWN_MASK
...
release_sock
lock_sock
virtio_transport_recv_connecting
sk->sk_socket->state (panic!)
The root cause is that vsock_find_bound_socket can't hold the lock_sock,
so there is a small race window between vsock_find_bound_socket() and
lock_sock(). If __vsock_release() is running in another task,
sk->sk_socket will be set to NULL inadvertently.
This fixes it by checking sk->sk_shutdown(suggested by Stefano) after
lock_sock since sk->sk_shutdown is set to SHUTDOWN_MASK under the
protection of lock_sock_nested.
Signed-off-by: Jia He <justin.he@arm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A fix for the recent change to how we restore non-volatile GPRs, which broke our
emulation of reading from the DSCR (Data Stream Control Register).
And a fix for the recent rewrite of interrupt/syscall exit in C, we need to
exclude KCOV from that code, otherwise it can lead to unrecoverable faults.
Thanks to:
Daniel Axtens.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl7SY4gTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgLrdD/9E6AuIXrHcQvsPg9wIdSBHTgZnM50R
GD/9N21qL/426jlpIA2hWhpyDtNevxk6TsVe67JJV6XgbYkxe0vgwV28zhefYVV0
YmUiP/BfRktvyn5jR1HkOOj/9vXoz15mcUwfkTgQjQORSjuzIRhml7JZzeJL6YSa
i3EWUbAlzPJ5BFKE0XzspPxkpaIhcAPqiP55rSrrYcex4/xoaReHUyKESa1sin4X
YYuUBHI6Ze2OqhFhEVHSime+j8qUOxU4l4/3oJC8I00xDAX++S69cnGrlISGB+Pe
sDmMIyi7O89QojMNS6z9vGQ8milUqLBvTNY2IKPam7APZeyGQm95oKAD3rRx+L9+
lsiJfV2X23Lq6ZfZhQe0bHB8n0SxIjFYogC+SYmHEtiLO20+FNsdXSH6UaU3F8QU
YSgYxda41dgAhMDInEIt5D1OjGRk705b9rtIPeHGDdw/vPrwuuDnlzqmgAFG9ahv
x/Q0IvZAHgV+ZIiMNsQ2Qu9gJb7z9WQ7VB7j5KkWHS4q2Ja03uYhrRDjOOGe8sca
j87Jgfu99vQhN/YQwmoTJZJlCd9guEcUdgQCGCLyiD7ywl0xCQ1OUxO2RQfu1H5V
bmdOJFPam+sQhg4Clq8EmHzgOuaMpOqdJcDYm/7LV5w9g0qrsfZQ/EqTS3F/alrv
9fHeX2gIHaKPSQ==
=TXe7
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- a fix for the recent change to how we restore non-volatile GPRs,
which broke our emulation of reading from the DSCR (Data Stream
Control Register).
- a fix for the recent rewrite of interrupt/syscall exit in C, we need
to exclude KCOV from that code, otherwise it can lead to
unrecoverable faults.
Thanks to Daniel Axtens.
* tag 'powerpc-5.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Disable sanitisers for C syscall/interrupt entry/exit code
powerpc/64s: Fix restore of NV GPRs after facility unavailable exception
- Fix proving of mvebu chips without PWM
- Fix errorpath on ida_get_simple() on the exar driver
- Notify userspace properly about line status changes
when flags are changed on lines.
- Fix a sleeping while holding spinlock in the mellanox
driver.
- Fix return value of the PXA and Kona probe calls.
- Fix IRQ locking of open drain lines, it is fine to
have IRQs on open drain lines flagged for output.
-----BEGIN PGP SIGNATURE-----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=NXVY
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here are some (very) late fixes for GPIO, none of them very serious
except the one tagged for stable for enabling IRQ on open drain lines:
- Fix probing of mvebu chips without PWM
- Fix error path on ida_get_simple() on the exar driver
- Notify userspace properly about line status changes when flags are
changed on lines.
- Fix a sleeping while holding spinlock in the mellanox driver.
- Fix return value of the PXA and Kona probe calls.
- Fix IRQ locking of open drain lines, it is fine to have IRQs on
open drain lines flagged for output"
* tag 'gpio-v5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: fix locking open drain IRQ lines
gpio: bcm-kona: Fix return value of bcm_kona_gpio_probe()
gpio: pxa: Fix return value of pxa_gpio_probe()
gpio: mlxbf2: Fix sleeping while holding spinlock
gpiolib: notify user-space about line status changes after flags are set
gpio: exar: Fix bad handling for ida_simple_get error path
gpio: mvebu: Fix probing for chips without PWM
VNIC protocol version is reported in big-endian format, but it
is not byteswapped before logging. Fix that, and remove version
comparison as only one protocol version exists at this time.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
st21nfca_tm_send_atr_res() misses to call kfree_skb() in an error path.
Add the missed function call to fix it.
Fixes: 1892bf844e ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 19e16d220f ("neigh: support smaller retrans_time settting")
we add more accurate control for ARP and NS. But for ARP I forgot to
update the latest guard in neigh_timer_handler(), then the next
retransmit would be reset to jiffies + HZ/2 if we set the retrans_time
less than 500ms. Fix it by setting the time_before() check to HZ/100.
IPv6 does not have this issue.
Reported-by: Jianwen Ji <jiji@redhat.com>
Fixes: 19e16d220f ("neigh: support smaller retrans_time settting")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
