Don't issue the soft reset if internal commands are flushed out with reset
status. Soft reset needs to be issued only if commands are really timed
out.
Link: https://lore.kernel.org/r/20211220141159.16117-4-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use spin_lock_irqsave() instead of spin_lock() while acquiring
reply_free_queue_lock & sbq_lock locks.
Link: https://lore.kernel.org/r/20211220141159.16117-3-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver doesn't express DMA addressing limitation under 32-bits anywhere
else, so remove the spurious GFP_DMA allocation.
Link: https://lore.kernel.org/r/20211222092247.928711-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver doesn't express DMA addressing limitation under 32-bits anywhere
else, so remove the spurious GFP_DMA allocation.
Link: https://lore.kernel.org/r/20211222092048.925829-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The myrs devices supports 64-bit addressing, so remove the spurious GFP_DMA
allocations.
Link: https://lore.kernel.org/r/20211222091935.925624-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver doesn't express DMA addressing limitation under 32-bits anywhere
else, so remove the spurious GFP_DMA allocation.
Link: https://lore.kernel.org/r/20211222091801.924745-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver doesn't express DMA addressing limitation under 32-bits anywhere
else, so remove the spurious GFP_DMA allocation.
Link: https://lore.kernel.org/r/20211222091630.922788-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The allocated buffers are used as a command payload, for which the block
layer and/or DMA API do the proper bounce buffering if needed.
Link: https://lore.kernel.org/r/20211222090842.920724-1-hch@lst.de
Reported-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The allocated buffers are used as a command payload, for which the block
layer and/or DMA API do the proper bounce buffering if needed.
Link: https://lore.kernel.org/r/20211222090311.916624-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The controller may frequently enter and exit suspend for each I/O which we
need to deal with. This is inefficient and may cause too much suspend and
resume activity for the controller. To avoid this, use a default 5s
autosuspend for the controller to stop frequently suspending and
resuming. This value may still be modified via sysfs interfaces.
Link: https://lore.kernel.org/r/1639999298-244569-16-git-send-email-chenxiang66@hisilicon.com
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Processing events such as PORTE_BROADCAST_RCVD may cause dependency issues
for runtime power management support. Such a problem would be that
handling a PORTE_BROADCAST_RCVD event requires that the host is resumed to
send SMP commands. However, in resuming the host, the phyup events
generated from re-enabling the phys are processed in the same workqueue as
the original PORTE_BROADCAST_RCVD event. As such, the host will never
finish resuming (as it waits for the phyup event processing), and then the
PORTE_BROADCAST_RCVD event can't be processed as the SMP commands are
blocked, and so we have a deadlock. Solve this problem by ensuring that
libsas keeps the host active until completely finished phy or port events,
such as PORTE_BYTES_DMAED. As such, we don't have to worry about resuming
the host for processing individual SMP commands in this example.
Link: https://lore.kernel.org/r/1639999298-244569-15-git-send-email-chenxiang66@hisilicon.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It is possible that controller may become suspended between processing a
phyup interrupt and the event being processed by libsas. As such, we can't
ensure the controller is active when processing the phyup event - this may
cause the phyup event to be lost or other issues. To avoid any possible
issues, add pm_runtime_get_noresume() in phyup interrupt handler and
pm_runtime_put_sync() in the work handler exit to ensure that we stay
always active. Since we only want to call pm_runtime_get_noresume() for v3
hw, signal this will a new event, HISI_PHYE_PHY_UP_PM.
Link: https://lore.kernel.org/r/1639999298-244569-14-git-send-email-chenxiang66@hisilicon.com
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During the processing of event PORT_BYTES_DMAED, the driver queues work
DISCE_DISCOVER_DOMAIN and then flushes workqueue ha->disco_q. If a new
phyup event occurs during resuming the controller, the work
PORTE_BYTES_DMAED of new phy occurs before suspended phy's. The work
DISCE_DISCOVER_DOMAIN of new phy requires an active SAS controller (it
needs to resume SAS controller by function scsi_sysfs_add_sdev() and some
other functions such as function add_device_link()). However, the
activation of the SAS controller requires completion of work
PORTE_BYTES_DMAED of suspended phys while it is blocked by new phy's work
on ha->event_q. So there is a deadlock and it is released only after resume
timeout.
To solve the issue, defer works of new phys during suspend and queue those
defer works after SAS controller becomes active.
Link: https://lore.kernel.org/r/1639999298-244569-13-git-send-email-chenxiang66@hisilicon.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the second part of function __sas_drain_work(), deferred work is queued.
This functionality is required other places so factor it out into the
function sas_queue_deferred_work().
Link: https://lore.kernel.org/r/1639999298-244569-12-git-send-email-chenxiang66@hisilicon.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a flag SAS_HA_RESUMING and use it to indicate the state of resuming the
host controller.
Link: https://lore.kernel.org/r/1639999298-244569-11-git-send-email-chenxiang66@hisilicon.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When sending SMP I/Os to the host we need to ensure that the host is not
suspended and can process the commands. This is a better approach than
replying on the host to resume itself to handle such commands. Use
pm_runtime_get_sync() and pm_runtime_put_sync() calls for the host when
executing SMP I/Os.
Link: https://lore.kernel.org/r/1639999298-244569-10-git-send-email-chenxiang66@hisilicon.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a new disk is inserted through an expander when the host was suspended,
it will not necessarily be detected as the topology is not re-scanned
during resume. To detect possible changes in topology during suspension,
insert a PORTE_BROADCAST_RCVD event per port when resuming to trigger a
revalidation.
Link: https://lore.kernel.org/r/1639999298-244569-8-git-send-email-chenxiang66@hisilicon.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Most places that use asd_sas_port->phy_list are protected by spinlock
asd_sas_port->phy_list_lock, however there are still some places which miss
grabbing the lock. Add it in function hisi_sas_refresh_port_id() when
accessing asd_sas_port->phy_list. This carries a risk that list mutates
while at the same time dropping the lock in function
hisi_sas_send_ata_reset_each_phy(). Read asd_sas_port->phy_mask instead of
accessing asd_sas_port->phy_list to avoid this risk.
Link: https://lore.kernel.org/r/1639999298-244569-6-git-send-email-chenxiang66@hisilicon.com
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Most places that use asd_sas_port->phy_list in libsas are protected by
spinlock asd_sas_port->phy_list_lock. However, there are still a few places
which miss the lock. Add it in those places.
Link: https://lore.kernel.org/r/1639999298-244569-5-git-send-email-chenxiang66@hisilicon.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry reported a deadlock that occurs when trying to access a
runtime-suspended SATA device. For obscure reasons, the rescan procedure
causes the link to be hard-reset, which disconnects the device.
The rescan tries to carry out a runtime resume when accessing the device.
scsi_rescan_device() holds the SCSI device lock and won't release it until
it can put commands onto the device's block queue. This can't happen until
the queue is successfully runtime-resumed or the device is unregistered.
But the runtime resume fails because the device is disconnected, and
__scsi_remove_device() can't do the unregistration because it can't get the
device lock.
The best way to resolve this deadlock appears to be to allow the block
queue to start running again even after an unsuccessful runtime resume.
The idea is that the driver or the SCSI error handler will need to be able
to use the queue to resolve the runtime resume failure.
This patch removes the err argument to blk_post_runtime_resume() and makes
the routine act as though the resume was successful always. This fixes the
deadlock.
Link: https://lore.kernel.org/r/1639999298-244569-4-git-send-email-chenxiang66@hisilicon.com
Fixes: e27829dc92 ("scsi: serialize ->rescan against ->remove")
Reported-and-tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This reverts commit b14a37e011.
In that commit, we had to filter out phy-up events during suspend, as it
work cause a deadlock between processing the phyup event and the resume HA
function try to drain the HA event workqueue to complete the resume
process.
Now that we no longer try to drain the HA event queue during the HA resume
processor, the deadlock would not occur, so remove the special handling for
it.
Link: https://lore.kernel.org/r/1639999298-244569-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For the hisi_sas driver, if a directly attached disk is removed during
suspend, a hang will occur in the resume process:
The background is that in commit 16fd4a7c59 ("scsi: hisi_sas: Add device
link between SCSI devices and hisi_hba"), it is ensured that the HBA device
cannot be runtime suspended when any SCSI device associated is active.
Other drivers which use libsas don't worry about this as none support
runtime suspend.
The mentioned hang occurs when an disk is removed during suspend. In the
removal process - from PHYE_RESUME_TIMEOUT event processing - we call into
scsi_remove_device(), which is being processed in the HA event workqueue.
Here we wait for all suppliers of the SCSI device to resume, which includes
the HBA device (from the above commit). However the HBA device cannot
resume, as it is waiting for the PHYE_RESUME_TIMEOUT to be processed (from
calling sas_resume_ha() -> sas_drain_work()). This is the deadlock.
There does not appear to be any need for the sas_drain_work() to be called
at all in sas_resume_ha() as it is not syncing against anything, so allow
LLDDs to avoid this by providing a variant of sas_resume_ha() which does
"sync", i.e. doesn't drain the event workqueue.
Link: https://lore.kernel.org/r/1639999298-244569-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The PVSCSI implementation in the VMware hypervisor under specific
configuration ("SCSI Bus Sharing" set to "Physical") returns zero dataLen
in the completion descriptor for READ CAPACITY(16). As a result, the kernel
can not detect proper disk geometry. This can be recognized by the kernel
message:
[ 0.776588] sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.
The PVSCSI implementation in QEMU does not set dataLen at all, keeping it
zeroed. This leads to a boot hang as was reported by Shmulik Ladkani.
It is likely that the controller returns the garbage at the end of the
buffer. Residual length should be set by the driver in that case. The SCSI
layer will erase corresponding data. See commit bdb2b8cab4 ("[SCSI] erase
invalid data returned by device") for details.
Commit e662502b3a ("scsi: vmw_pvscsi: Set correct residual data length")
introduced the issue by setting residual length unconditionally, causing
the SCSI layer to erase the useful payload beyond dataLen when this value
is returned as 0.
As a result, considering existing issues in implementations of PVSCSI
controllers, we do not want to call scsi_set_resid() when dataLen ==
0. Calling scsi_set_resid() has no effect if dataLen equals buffer length.
Link: https://lore.kernel.org/lkml/20210824120028.30d9c071@blondie/
Link: https://lore.kernel.org/r/20211220190514.55935-1-amakhalov@vmware.com
Fixes: e662502b3a ("scsi: vmw_pvscsi: Set correct residual data length")
Cc: Matt Wang <wwentao@vmware.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Vishal Bhakta <vbhakta@vmware.com>
Cc: VMware PV-Drivers <pv-drivers@vmware.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: linux-scsi@vger.kernel.org
Cc: stable@vger.kernel.org
Reported-and-suggested-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|- iscsi_if_destroy_conn |-dev_attr_show
|-iscsi_conn_teardown
|-spin_lock_bh |-iscsi_sw_tcp_conn_get_param
|-kfree(conn->persistent_address) |-iscsi_conn_get_param
|-kfree(conn->local_ipaddr)
==>|-read persistent_address
==>|-read local_ipaddr
|-spin_unlock_bh
When iscsi_conn_teardown() and iscsi_conn_get_param() happen in parallel, a
UAF may be triggered.
Link: https://lore.kernel.org/r/046ec8a0-ce95-d3fc-3235-666a7c65b224@huawei.com
Reported-by: Lu Tixiong <lutianxiong@huawei.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Lixiaokeng <lixiaokeng@huawei.com>
Signed-off-by: Linfeilong <linfeilong@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In Isolation VM, all shared memory with host needs to mark visible
to host via hvcall. vmbus_establish_gpadl() has already done it for
storvsc rx/tx ring buffer. The page buffer used by vmbus_sendpacket_
mpb_desc() still needs to be handled. Use DMA API(scsi_dma_map/unmap)
to map these memory during sending/receiving packet and return swiotlb
bounce buffer dma address. In Isolation VM, swiotlb bounce buffer is
marked to be visible to host and the swiotlb force mode is enabled.
Set device's dma min align mask to HV_HYP_PAGE_SIZE - 1 in order to
keep the original data offset in the bounce buffer.
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211213071407.314309-5-ltykernel@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
One driver fix: the pm8001 has never actually worked on a system with
an IOMMU and this fixes that use case.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYb0E6yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSNgAPsFHTM+
5uvAtK7W5pNQHnG3DaBPwED7LuklKmNfxH0c2AEA2BE7ijAda1DOrYC61BKQJtGm
8W+shJ/O0/mJSYqcCbQ=
=J2/2
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One driver fix: the pm8001 has never actually worked on a system with
an IOMMU and this fixes that use case"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
Value 0 is used for SAM status and libsas exec_status bytes codes in
sas_end_task() - use defined macros instead. In addition, change to proper
enum types.
Also replace SAM_STAT_CHECK_CONDITION with SAS_SAM_STAT_CHECK_CONDITION,
the former being a proper member of enum exec_status.
Link: https://lore.kernel.org/r/1639579061-179473-9-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The OOB interrupt and phyup interrupt handlers may run out-of-order in high
CPU usage scenarios. Since the hisi_sas_phy.timer is added in
hisi_sas_phy_oob_ready() and disarmed in phy_up_v3_hw(), this out-of-order
execution will cause hisi_sas_phy.timer timeout to trigger.
To solve, protect hisi_sas_phy.timer and .attached with a lock, and ensure
that the timer won't be added after phyup handler completes.
Link: https://lore.kernel.org/r/1639579061-179473-8-git-send-email-john.garry@huawei.com
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If we issue a controller reset command during executing a FLR a hung task
may be found:
Call trace:
__switch_to+0x158/0x1cc
__schedule+0x2e8/0x85c
schedule+0x7c/0x110
schedule_timeout+0x190/0x1cc
__down+0x7c/0xd4
down+0x5c/0x7c
hisi_sas_task_exec+0x510/0x680 [hisi_sas_main]
hisi_sas_queue_command+0x24/0x30 [hisi_sas_main]
smp_execute_task_sg+0xf4/0x23c [libsas]
sas_smp_phy_control+0x110/0x1e0 [libsas]
transport_sas_phy_reset+0xc8/0x190 [libsas]
phy_reset_work+0x2c/0x40 [libsas]
process_one_work+0x1dc/0x48c
worker_thread+0x15c/0x464
kthread+0x160/0x170
ret_from_fork+0x10/0x18
This is a race condition which occurs when the FLR completes first.
Here the host HISI_SAS_RESETTING_BIT flag out gets of sync as
HISI_SAS_RESETTING_BIT is not always cleared with the hisi_hba.sem held, so
now only set/unset HISI_SAS_RESETTING_BIT under hisi_hba.sem .
Link: https://lore.kernel.org/r/1639579061-179473-7-git-send-email-john.garry@huawei.com
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A user may issue a control phy command from sysfs at any time, even if the
controller is resetting.
If a phy is disabled by hardreset/linkreset command before calling
get_phys_state() in the reset path, the saved phy state may be incorrect.
To avoid incorrectly recording the phy state, use hisi_hba.sem to ensure
that the controller reset may not run at the same time as when the phy
control function is running.
Link: https://lore.kernel.org/r/1639579061-179473-6-git-send-email-john.garry@huawei.com
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The task prep code is the same between the normal path (in
hisi_sas_task_prep()) and the internal abort path, so factor is out into a
common function.
Link: https://lore.kernel.org/r/1639579061-179473-5-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To help factor out code in future, it's useful to know if we're executing
an internal abort, so pass a pointer to the structure. The idea is that a
NULL pointer means not an internal abort.
Link: https://lore.kernel.org/r/1639579061-179473-4-git-send-email-john.garry@huawei.com
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For an internal abort, the task does not have a protocol, so set to none.
This will make it easier to differentiate internal abort tasks in future.
Link: https://lore.kernel.org/r/1639579061-179473-3-git-send-email-john.garry@huawei.com
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently we start delivery of commands to the DQ after returning from
hisi_sas_task_exec() with success.
Let's just start delivery directly in that function without having to check
if some local variable is set.
Link: https://lore.kernel.org/r/1639579061-179473-2-git-send-email-john.garry@huawei.com
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
dma_alloc_coherent() ignores the zone specifiers so this is pointless and
confusing.
Link: https://lore.kernel.org/r/20211214163605.416288-1-hch@lst.de
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Call shost_for_each_device() with holding host->host_lock will cause a
deadlock situation, which will cause the system to stall (the log as
follow). Fix this issue by using __shost_for_each_device() in
ufshcd_pending_cmds().
stalls on CPUs/tasks:
all trace:
__switch_to+0x120/0x170
0xffff800011643998
ask dump for CPU 5:
ask:kworker/u16:2 state:R running task stack: 0 pid: 80 ppid: 2 flags:0x0000000a
orkqueue: events_unbound async_run_entry_fn
all trace:
__switch_to+0x120/0x170
0x0
ask dump for CPU 6:
ask:kworker/u16:6 state:R running task stack: 0 pid: 164 ppid: 2 flags:0x0000000a
orkqueue: events_unbound async_run_entry_fn
all trace:
__switch_to+0x120/0x170
0xffff54e7c4429f80
ask dump for CPU 7:
ask:kworker/u16:4 state:R running task stack: 0 pid: 153 ppid: 2 flags:0x0000000a
orkqueue: events_unbound async_run_entry_fn
all trace:
__switch_to+0x120/0x170
blk_mq_run_hw_queue+0x34/0x110
blk_mq_sched_insert_request+0xb0/0x120
blk_execute_rq_nowait+0x68/0x88
blk_execute_rq+0x4c/0xd8
__scsi_execute+0xec/0x1d0
scsi_vpd_inquiry+0x84/0xf0
scsi_get_vpd_buf+0x34/0xb8
scsi_attach_vpd+0x34/0x140
scsi_probe_and_add_lun+0xa6c/0xab8
__scsi_scan_target+0x438/0x4f8
scsi_scan_channel+0x6c/0xa8
scsi_scan_host_selected+0xf0/0x150
do_scsi_scan_host+0x88/0x90
scsi_scan_host+0x1b4/0x1d0
ufshcd_async_scan+0x248/0x310
async_run_entry_fn+0x30/0x178
process_one_work+0x1e8/0x368
worker_thread+0x40/0x478
kthread+0x174/0x180
ret_from_fork+0x10/0x20
Link: https://lore.kernel.org/r/20211214120537.531628-1-huobean@gmail.com
Fixes: 8d077ede48 ("scsi: ufs: Optimize the command queueing code")
Reported-by: YongQin Liu <yongqin.liu@linaro.org>
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the dev_loss_tmo setting is only ever used for SCSI
devices. This patch reshuffles initialisation such that the SCSI remote
ports are registered before the NVMe ones, allowing the dev_loss_tmo
setting to be synchronized between SCSI and NVMe.
Link: https://lore.kernel.org/r/20211214111139.52503-1-dwagner@suse.de
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The "mybuf" string comes from the user, so we need to ensure that it is NUL
terminated.
Link: https://lore.kernel.org/r/20211214070527.GA27934@kili
Fixes: bd2cdd5e40 ("scsi: lpfc: NVME Initiator: Add debugfs support")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull in the 5.16 fixes branch to resolve a conflict in the UFS driver
core.
Conflicts:
drivers/scsi/ufs/ufshcd.c
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When building under -Warray-bounds, a warning is generated when casting a
u32 into MAILBOX_t (which is larger). This warning is conservative, but
it's not an unreasonable change to make to improve future robustness. Use a
tagged struct_group that can refer to either the specific fields or the
first u32 separately, silencing this warning:
drivers/scsi/lpfc/lpfc_sli.c: In function 'lpfc_reset_barrier':
drivers/scsi/lpfc/lpfc_sli.c:4787:29: error: array subscript 'MAILBOX_t[0]' is partly outside array bounds of 'volatile uint32_t[1]' {aka 'volatile unsigned int[1]'} [-Werror=array-bounds]
4787 | ((MAILBOX_t *)&mbox)->mbxCommand = MBX_KILL_BOARD;
| ^~
drivers/scsi/lpfc/lpfc_sli.c:4752:27: note: while referencing 'mbox'
4752 | volatile uint32_t mbox;
| ^~~~
There is no change to the resulting executable instruction code.
Link: https://lore.kernel.org/r/20211203223351.107323-1-keescook@chromium.org
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Add struct_group() to mark "stat" region of struct lpfc_cgn_info that
should be initialized to zero, and refactor the "data" region memset()
to wipe everything up to the cgn_stats region.
Link: https://lore.kernel.org/r/20211208195957.1603092-1-keescook@chromium.org
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver supports a "direct" mode of operation, where the SMP req frame
is directly copied into the command payload (and vice-versa for the SMP
resp).
To get at the SMP req frame data in the scatterlist the driver uses
phys_to_virt() on the DMA mapped memory dma_addr_t . This is broken, and
subsequently crashes as follows when an IOMMU is enabled:
Unable to handle kernel paging request at virtual address
ffff0000fcebfb00
...
pc : pm80xx_chip_smp_req+0x2d0/0x3d0
lr : pm80xx_chip_smp_req+0xac/0x3d0
pm80xx_chip_smp_req+0x2d0/0x3d0
pm8001_task_exec.constprop.0+0x368/0x520
pm8001_queue_command+0x1c/0x30
smp_execute_task_sg+0xdc/0x204
sas_discover_expander.part.0+0xac/0x6cc
sas_discover_root_expander+0x8c/0x150
sas_discover_domain+0x3ac/0x6a0
process_one_work+0x1d0/0x354
worker_thread+0x13c/0x470
kthread+0x17c/0x190
ret_from_fork+0x10/0x20
Code: 371806e1 910006d6 6b16033f 54000249 (38766b05)
---[ end trace b91d59aaee98ea2d ]---
note: kworker/u192:0[7] exited with preempt_count 1
Instead use kmap_atomic().
--
Difference to v1:
- use kmap_atomic() in both locations
Difference to v2:
- add whitespace around arithmetic (Damien)
Link: https://lore.kernel.org/r/1639390248-213603-1-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Four fixes, all in drivers. Three are small and obvious, the qedi one
is a bit larger but also pretty obvious.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYbUihiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfqeAQDSVbQd
T9SwcBLKWhElkw57urT2FLEx4fVFhsPHeCsImwD/ZLk3zq7Hu1jc/I5F1NQhb8Ux
mRy0PZEMf8XKzaglYYk=
=zqyN
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, all in drivers.
Three are small and obvious, the qedi one is a bit larger but also
pretty obvious"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Format log strings only if needed
scsi: scsi_debug: Fix buffer size of REPORT ZONES command
scsi: qedi: Fix cmd_cleanup_cmpl counter mismatch issue
scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc()
The driver uses irq_set_affinity_hint to set the affinity for the lpfc
interrupts to a mask corresponding to the local NUMA node to avoid
performance overhead on AMD architectures.
However, irq_set_affinity_hint() setting the affinity is an undocumented
side effect that this function also sets the affinity under the hood.
To remove this side effect irq_set_affinity_hint() has been marked as
deprecated and new interfaces have been introduced.
Also, as per the commit dcaa213679 ("scsi: lpfc: Change default IRQ model
on AMD architectures"):
"On AMD architecture, revert the irq allocation to the normal style
(non-managed) and then use irq_set_affinity_hint() to set the cpu affinity
and disable user-space rebalancing."
we don't really need to set the affinity_hint as user-space rebalancing for
the lpfc interrupts is not desired.
Hence, replace the irq_set_affinity_hint() with irq_set_affinity() which
only applies the affinity for the interrupts.
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Link: https://lore.kernel.org/r/20210903152430.244937-12-nitesh@redhat.com
The driver uses irq_set_affinity_hint() specifically for the high IOPS
queue interrupts for two purposes:
- To set the affinity_hint which is consumed by the userspace for
distributing the interrupts
- To apply an affinity that it provides
The driver enforces its own affinity to bind the high IOPS queue interrupts
to the local NUMA node. However, irq_set_affinity_hint() applying the
provided cpumask as an affinity (if not NULL) for the interrupt is an
undocumented side effect.
To remove this side effect irq_set_affinity_hint() has been marked
as deprecated and new interfaces have been introduced. Hence, replace the
irq_set_affinity_hint() with the new interface irq_set_affinity_and_hint()
where the provided mask needs to be applied as the affinity and
affinity_hint pointer needs to be set and replace with
irq_update_affinity_hint() where only affinity_hint needs to be updated.
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20210903152430.244937-6-nitesh@redhat.com
The driver uses irq_set_affinity_hint() specifically for the high IOPS
queue interrupts for two purposes:
- To set the affinity_hint which is consumed by the userspace for
distributing the interrupts
- To apply an affinity that it provides
The driver enforces its own affinity to bind the high IOPS queue interrupts
to the local NUMA node. However, irq_set_affinity_hint() applying the
provided cpumask as an affinity for the interrupt is an undocumented side
effect.
To remove this side effect irq_set_affinity_hint() has been marked
as deprecated and new interfaces have been introduced. Hence, replace the
irq_set_affinity_hint() with the new interface irq_set_affinity_and_hint()
where the provided mask needs to be applied as the affinity and
affinity_hint pointer needs to be set and replace with
irq_update_affinity_hint() where only affinity_hint needs to be updated.
Change the megasas_set_high_iops_queue_affinity_hint function name to
megasas_set_high_iops_queue_affinity_and_hint to clearly indicate that the
function is setting both affinity and affinity_hint.
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20210903152430.244937-5-nitesh@redhat.com
Commit 598a90f200 ("scsi: qla2xxx: add ring buffer for tracing debug
logs") introduced unconditional log string formatting to ql_dbg() even if
ql_dbg_log event is disabled. It harms performance because some strings are
formatted in fastpath and/or interrupt context.
Link: https://lore.kernel.org/r/20211112145446.51210-1-r.bolshakov@yadro.com
Fixes: 598a90f200 ("scsi: qla2xxx: add ring buffer for tracing debug logs")
Cc: Rajan Shanmugavelu <rajan.shanmugavelu@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 14.0.0.4.
Link: https://lore.kernel.org/r/20211204002644.116455-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dump raw CMF parameter information in debugfs cgn_buffer.
Link: https://lore.kernel.org/r/20211204002644.116455-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ensure read bytes data does not go over MBPI for CMF timer intervals that
are purposely shortened.
Link: https://lore.kernel.org/r/20211204002644.116455-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Calculate any extra bytes needed to account for timer accuracy. If we are
less than LPFC_CMF_INTERVAL, then calculate the adjustment needed for total
to reflect a full LPFC_CMF_INTERVAL.
Add additional info to rxmonitor, and adjust some log formatting.
Link: https://lore.kernel.org/r/20211204002644.116455-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Extraneous teardown routines are present in the firmware dump path causing
altered states in firmware captures.
When a firmware dump is requested via sysfs, trigger the dump immediately
without tearing down structures and changing adapter state.
The driver shall rely on pre-existing firmware error state clean up
handlers to restore the adapter.
Link: https://lore.kernel.org/r/20211204002644.116455-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver is calling schedule_timeout after the DA_ID nameserver request
and LOGO commands are issued to the fabric by the initiator virtual
endport. These fixed delay functions are causing long delays in the
driver's worker thread when processing discovery I/Os in a serialized
fashion, which is then triggering mailbox timeout errors artificially.
To fix this, don't wait on the DA_ID request to complete and call
wait_event_timeout to allow the vport delete thread to make progress on an
event driven basis rather than fixing the wait time.
Link: https://lore.kernel.org/r/20211204002644.116455-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Issuing lpfc_force_rscn twice results in an ndlp kref use-after-free call
trace.
A prior patch reworked the get/put handling by ensuring nlp_get was done
before WQE submission and a put was done in the completion path.
Unfortunately, the issue_els_rscn path had a piece of legacy code that did
a nlp_put, causing an imbalance on the ref counts.
Fixed by removing the unnecessary legacy code snippet.
Link: https://lore.kernel.org/r/20211204002644.116455-4-jsmart2021@gmail.com
Fixes: 4430f7fd09 ("scsi: lpfc: Rework locations of ndlp reference taking")
Cc: <stable@vger.kernel.org> # v5.11+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During heavy I/O testing with issue_lip to bounce the link, occasionally
I/O is terminated with status 3 result 9, which means the RPI is suspended.
The I/O is completed and this type of error will result in immediate retry
by the SCSI layer. The retry count expires and the I/O fails and returns
error to the application.
To avoid these quick retry/retries exhausted scenarios change the return
code given to the midlayer to DID_REQUEUE rather than DID_ERROR. This gets
them retried, and eventually succeed when the link recovers.
Link: https://lore.kernel.org/r/20211204002644.116455-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During rmmod testing, messages appeared indicating lpfc_mbuf_pool entries
were still busy. This situation was only seen doing rmmod after at least 1
vport (NPIV) instance was created and destroyed. The number of messages
scaled with the number of vports created.
When a vport is created, it can receive a PLOGI from another initiator
Nport. When this happens, the driver prepares to ack the PLOGI and
prepares an RPI for registration (via mbx cmd) which includes an mbuf
allocation. During the unsolicited PLOGI processing and after the RPI
preparation, the driver recognizes it is one of the vport instances and
decides to reject the PLOGI. During the LS_RJT preparation for the PLOGI,
the mailbox struct allocated for RPI registration is freed, but the mbuf
that was also allocated is not released.
Fix by freeing the mbuf with the mailbox struct in the LS_RJT path.
As part of the code review to figure the issue out a couple of other areas
where found that also would not have released the mbuf. Those are cleaned
up as well.
Link: https://lore.kernel.org/r/20211204002644.116455-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The time spent in io_schedule() and also the interrupt latency are
significant when submitting direct I/O to a UFS device. Hence this patch
that implements polling support. User space software can enable polling by
passing the RWF_HIPRI flag to the preadv2() system call or the
IORING_SETUP_IOPOLL flag to the io_uring interface.
Although the block layer supports to partition the tag space for
interrupt-based completions (HCTX_TYPE_DEFAULT) purposes and polling
(HCTX_TYPE_POLL), the choice has been made to use the same hardware queue
for both hctx types because partitioning the tag space would negatively
affect performance.
On my test setup this patch increases IOPS from 2736 to 22000 (8x) for the
following test:
for hipri in 0 1; do
fio --ioengine=io_uring --iodepth=1 --rw=randread \
--runtime=60 --time_based=1 --direct=1 --name=qd1 \
--filename=/dev/block/sda --ioscheduler=none --gtod_reduce=1 \
--norandommap --hipri=$hipri
done
Link: https://lore.kernel.org/r/20211203231950.193369-18-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the clock scaling lock from ufshcd_queuecommand() since it is a
performance bottleneck. Instead check the SCSI device budget bitmaps in the
code that waits for ongoing ufshcd_queuecommand() calls. A bit is set in
sdev->budget_map just before scsi_queue_rq() is called and a bit is cleared
from that bitmap if scsi_queue_rq() does not submit the request or after
the request has finished. See also the blk_mq_{get,put}_dispatch_budget()
calls in the block layer.
There is no risk for a livelock since the block layer delays queue reruns
if queueing a request fails because the SCSI host has been blocked.
Link: https://lore.kernel.org/r/20211203231950.193369-17-bvanassche@acm.org
Cc: Asutosh Das (asd) <asutoshd@codeaurora.org>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of locking and unlocking the clock scaling lock, surround the
command queueing code with an RCU reader lock and call synchronize_rcu().
This patch prepares for removal of the clock scaling lock.
Link: https://lore.kernel.org/r/20211203231950.193369-16-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following kernel crash:
Unable to handle kernel paging request at virtual address ffffffc91e735000
Call trace:
__queue_work+0x26c/0x624
queue_work_on+0x6c/0xf0
ufshcd_hold+0x12c/0x210
__ufshcd_wl_suspend+0xc0/0x400
ufshcd_wl_shutdown+0xb8/0xcc
device_shutdown+0x184/0x224
kernel_restart+0x4c/0x124
__arm64_sys_reboot+0x194/0x264
el0_svc_common+0xc8/0x1d4
do_el0_svc+0x30/0x8c
el0_svc+0x20/0x30
el0_sync_handler+0x84/0xe4
el0_sync+0x1bc/0x1c0
Fix this crash by ungating the clock before destroying the work queue on
which clock gating work is queued.
Link: https://lore.kernel.org/r/20211203231950.193369-15-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Release resources when aborting a command. Make sure that aborted commands
are completed once by clearing the corresponding tag bit from
hba->outstanding_reqs. This patch is an improved version of commit
3ff1f6b6ba ("scsi: ufs: core: Improve SCSI abort handling").
Link: https://lore.kernel.org/r/20211203231950.193369-14-bvanassche@acm.org
Fixes: 7a3e97b0dc ("[SCSI] ufshcd: UFS Host controller driver")
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The only functional change in this patch is that scsi_done() is now called
after ufshcd_release() and ufshcd_clk_scaling_update_busy() instead of
before.
The next patch in this series will introduce a call to
ufshcd_release_scsi_cmd() in the abort handler.
Link: https://lore.kernel.org/r/20211203231950.193369-13-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch does not change any functionality but makes the next patch in
this series easier to read.
Link: https://lore.kernel.org/r/20211203231950.193369-12-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The previous patch removed all code that uses hba->cmd_queue. Hence also
remove hba->cmd_queue itself.
Link: https://lore.kernel.org/r/20211203231950.193369-11-bvanassche@acm.org
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following deadlock has been observed on a test setup:
- All tags allocated
- The SCSI error handler calls ufshcd_eh_host_reset_handler()
- ufshcd_eh_host_reset_handler() queues work that calls
ufshcd_err_handler()
- ufshcd_err_handler() locks up as follows:
Workqueue: ufs_eh_wq_0 ufshcd_err_handler.cfi_jt
Call trace:
__switch_to+0x298/0x5d8
__schedule+0x6cc/0xa94
schedule+0x12c/0x298
blk_mq_get_tag+0x210/0x480
__blk_mq_alloc_request+0x1c8/0x284
blk_get_request+0x74/0x134
ufshcd_exec_dev_cmd+0x68/0x640
ufshcd_verify_dev_init+0x68/0x35c
ufshcd_probe_hba+0x12c/0x1cb8
ufshcd_host_reset_and_restore+0x88/0x254
ufshcd_reset_and_restore+0xd0/0x354
ufshcd_err_handler+0x408/0xc58
process_one_work+0x24c/0x66c
worker_thread+0x3e8/0xa4c
kthread+0x150/0x1b4
ret_from_fork+0x10/0x30
Fix this lockup by making ufshcd_exec_dev_cmd() allocate a reserved
request.
Link: https://lore.kernel.org/r/20211203231950.193369-10-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for making sdev->host->can_queue less than hba->nutrs. This patch
does not change any functionality.
Link: https://lore.kernel.org/r/20211203231950.193369-9-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use hba->outstanding_reqs instead of ufshcd_any_tag_in_use(). This patch
prepares for removal of the blk_mq_start_request() call from
ufshcd_wait_for_dev_cmd(). blk_mq_tagset_busy_iter() only iterates over
started requests.
Link: https://lore.kernel.org/r/20211203231950.193369-8-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver data pointer must be set before any callbacks are registered
that use that pointer. Hence move the initialization of that pointer from
after the ufshcd_init() call to inside ufshcd_init().
Link: https://lore.kernel.org/r/20211203231950.193369-7-bvanassche@acm.org
Fixes: 3b1d05807a ("[SCSI] ufs: Segregate PCI Specific Code")
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 7252a36030 ("scsi: ufs: Avoid busy-waiting by eliminating tag
conflicts") guarantees that 'tag' is not in use by any SCSI command.
Remove the check that returns early if a conflict occurs.
Link: https://lore.kernel.org/r/20211203231950.193369-6-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the sdev_rpmb member of struct ufs_hba is only used inside
ufshcd_scsi_add_wlus(), convert it into a local variable.
Link: https://lore.kernel.org/r/20211203231950.193369-5-bvanassche@acm.org
Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit edc0596cc0 ("scsi: ufs: core: Stop clearing UNIT ATTENTIONS")
removed all callers of is_rpmb_wlun(). Hence also remove the function
itself.
Link: https://lore.kernel.org/r/20211203231950.193369-4-bvanassche@acm.org
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The new name makes it clear what the meaning of the function argument is.
Link: https://lore.kernel.org/r/20211203231950.193369-3-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The comment above scsi_device_max_queue_depth() and also the description of
commit ca44532139 ("scsi: core: Make sure sdev->queue_depth is <=
max(shost->can_queue, 1024)") contradict the implementation of the function
scsi_device_max_queue_depth(). Additionally, the maximum queue depth of a
SCSI LUN never exceeds host->can_queue. Fix scsi_device_max_queue_depth()
by changing max_t() into min_t().
Link: https://lore.kernel.org/r/20211203231950.193369-2-bvanassche@acm.org
Fixes: ca44532139 ("scsi: core: Make sure sdev->queue_depth is <= max(shost->can_queue, 1024)")
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
qedi formats SYSFS_FLAG_FW_SEL_BOOT as a byte and the qla4xxx driver does
exactly the same thing. Align them for consistency.
Link: https://lore.kernel.org/r/20211130203813.12138-3-f.fainelli@gmail.com
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The format used for formatting SYSFS_FLAG_FW_SEL_BOOT creates the
following warning:
drivers/scsi/qedi/qedi_main.c:2259:35: warning: format specifies type
'char' but the argument has type 'int' [-Wformat]
rc = snprintf(buf, 3, "%hhd\n",
SYSFS_FLAG_FW_SEL_BOOT);
Fix this to cast the constant as a char since the intention is to print it
via sysfs as a byte.
Link: https://lore.kernel.org/r/20211130203813.12138-2-f.fainelli@gmail.com
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All uses of the 'hisi_hba->slot_index_tags' bitmap are protected with the
'hisi_hba->lock' spinlock.
Prefer the non-atomic '__[set|clear]_bit()' functions to save a few cycles.
Link: https://lore.kernel.org/r/8ee33e463523db080e6a2c06f332e47abb69359b.1637961191.git.christophe.jaillet@wanadoo.fr
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The 'hisi_hba->slot_index_tags' bitmap is allocated with bitmap_zalloc() so
it is already cleared. There is no need to clear it another time, one bit
at a time.
Remove the corresponding useless code.
Link: https://lore.kernel.org/r/41c86e7e3e05a13bd586d8ee1b81296140b7a6eb.1637961191.git.christophe.jaillet@wanadoo.fr
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
'hisi_hba->slot_index_tags' is a bitmap. Use 'devm_bitmap_zalloc()' to
simplify code, improve the semantic, and avoid some open-coded arithmetic
in allocator arguments.
Link: https://lore.kernel.org/r/4afa3f71e66c941c660627c7f5b0223b51968ebb.1637961191.git.christophe.jaillet@wanadoo.fr
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to ZBC and SPC specifications, the unit of ALLOCATION LENGTH
field of REPORT ZONES command is byte. However, current scsi_debug
implementation handles it as number of zones to calculate buffer size to
report zones. When the ALLOCATION LENGTH has a large number, this results
in too large buffer size and causes memory allocation failure. Fix the
failure by handling ALLOCATION LENGTH as byte unit.
Link: https://lore.kernel.org/r/20211207010638.124280-1-shinichiro.kawasaki@wdc.com
Fixes: f0d1cf9378 ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
two patches, both in drivers. One is a fix to FC recovery (lpfc) and
the other is an enhancement to support the Intel Alder Motherboard
with the UFS driver which comes under the -rc exception process for
hardware enabling.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYat3yyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbwKAP9yj4Da
52hzcLcbjT6Z0SurmLrGd4fTaAinSDueSGvh5wEA/QDugzP7CEnogk9S7cAfJLQf
QO1HhyRn6Vx+0r57Cj0=
=0aRn
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two patches, both in drivers.
One is a fix to FC recovery (lpfc) and the other is an enhancement to
support the Intel Alder Motherboard with the UFS driver which comes
under the -rc exception process for hardware enabling"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-pci: Add support for Intel ADL
scsi: lpfc: Fix non-recovery of remote ports following an unsolicited LOGO
Make sd_zbc_parse_report() use if/else when setting the write pointer,
instead of setting it unconditionally and then conditionally updating it.
Link: https://lore.kernel.org/r/20211201142821.64650-2-Niklas.Cassel@wdc.com
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to the ZBC (and ZAC) specification, a zone that has Zone Type set
to Conventional, must also have its Zone Condition set to "Not Write
Pointer".
Therefore, a conventional zone will never have Zone Condition set to
"Full", which means that we can omit the non-conventional prerequisite from
the zone full condition check.
Link: https://lore.kernel.org/r/20211201142821.64650-1-Niklas.Cassel@wdc.com
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Calling scsi_remove_host() before scsi_add_host() results in a crash:
BUG: kernel NULL pointer dereference, address: 0000000000000108
RIP: 0010:device_del+0x63/0x440
Call Trace:
device_unregister+0x17/0x60
scsi_remove_host+0xee/0x2a0
pm8001_pci_probe+0x6ef/0x1b90 [pm80xx]
local_pci_probe+0x3f/0x90
We cannot call scsi_remove_host() in pm8001_alloc() because scsi_add_host()
has not been called yet at that point in time.
Function call tree:
pm8001_pci_probe()
|
`- pm8001_pci_alloc()
| |
| `- pm8001_alloc()
| |
| `- scsi_remove_host()
|
`- scsi_add_host()
Link: https://lore.kernel.org/r/20211201041627.1592487-1-ipylypiv@google.com
Fixes: 05c6c029a4 ("scsi: pm80xx: Increase number of supported queues")
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove this include directive from code that does not use any functionality
from kernel/async.c.
Link: https://lore.kernel.org/r/20211129194609.3466071-13-bvanassche@acm.org
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following kernel-doc warning:
drivers/scsi/pmcraid.c:3317: warning: Excess function parameter 'done' description in 'pmcraid_queuecommand_lck'
Link: https://lore.kernel.org/r/20211129194609.3466071-12-bvanassche@acm.org
Fixes: af049dfd0b ("scsi: core: Remove the 'done' argument from SCSI queuecommand_lck functions")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following kernel-doc warnings:
drivers/scsi/pm8001/pm8001_ctl.c:900: warning: cannot understand function prototype: 'const char *const mpiStateText[] = '
drivers/scsi/pm8001/pm8001_ctl.c:930: warning: Function parameter or member 'attr' not described in 'ctl_hmi_error_show'
drivers/scsi/pm8001/pm8001_ctl.c:951: warning: Function parameter or member 'attr' not described in 'ctl_raae_count_show'
drivers/scsi/pm8001/pm8001_ctl.c:972: warning: Function parameter or member 'attr' not described in 'ctl_iop0_count_show'
drivers/scsi/pm8001/pm8001_ctl.c:993: warning: Function parameter or member 'attr' not described in 'ctl_iop1_count_show'
Link: https://lore.kernel.org/r/20211129194609.3466071-11-bvanassche@acm.org
Fixes: 4ddbea1b6f ("scsi: pm80xx: Add sysfs attribute to check MPI state")
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following kernel-doc warning:
drivers/scsi/megaraid/megaraid_mbox.c:1439: warning: Excess function parameter 'done' description in 'megaraid_queue_command_lck'
Link: https://lore.kernel.org/r/20211129194609.3466071-10-bvanassche@acm.org
Fixes: af049dfd0b ("scsi: core: Remove the 'done' argument from SCSI queuecommand_lck functions")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following kernel-doc warning:
drivers/scsi/initio.c:2613: warning: Excess function parameter 'done' description in 'i91u_queuecommand_lck'
Link: https://lore.kernel.org/r/20211129194609.3466071-9-bvanassche@acm.org
Fixes: af049dfd0b ("scsi: core: Remove the 'done' argument from SCSI queuecommand_lck functions")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following kernel-doc warning:
drivers/scsi/dc395x.c:964: warning: Excess function parameter 'done' description in 'dc395x_queue_command_lck'
Link: https://lore.kernel.org/r/20211129194609.3466071-8-bvanassche@acm.org
Fixes: af049dfd0b ("scsi: core: Remove the 'done' argument from SCSI queuecommand_lck functions")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following kernel-doc warning:
'bfad_im_vport_attrs' is only used in one source file. Hence declare this
array static.
Link: https://lore.kernel.org/r/20211129194609.3466071-7-bvanassche@acm.org
Fixes: e73af234a1 ("scsi: bfa: Switch to attribute groups")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following kernel-doc warning:
drivers/scsi/atp870u.c:622: warning: Excess function parameter 'done' description in 'atp870u_queuecommand_lck'
Link: https://lore.kernel.org/r/20211129194609.3466071-6-bvanassche@acm.org
Fixes: af049dfd0b ("scsi: core: Remove the 'done' argument from SCSI queuecommand_lck functions")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following kernel-doc warning:
drivers/scsi/a100u2w.c:915: warning: Excess function parameter 'done' description in 'inia100_queue_lck'
Link: https://lore.kernel.org/r/20211129194609.3466071-5-bvanassche@acm.org
Fixes: af049dfd0b ("scsi: core: Remove the 'done' argument from SCSI queuecommand_lck functions")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI debugfs code supports showing information about pending commands,
including translating SCSI command flags from numeric into text format.
Also convert the SCMD_LAST flag from numeric into text form.
Link: https://lore.kernel.org/r/20211129194609.3466071-4-bvanassche@acm.org
Fixes: 8930a6c207 ("scsi: core: add support for request batching")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
