Recent commit fc7ec7f554 ("l2tp: delete sessions using work queue")
incorrectly uses drain_workqueue. The use of drain_workqueue in
l2tp_pre_exit_net is flawed because the workqueue is shared by all
nets and it is therefore possible for new work items to be queued
for other nets while drain_workqueue runs.
Instead of using drain_workqueue, use __flush_workqueue twice. The
first one will run all tunnel delete work items and any work already
queued. When tunnel delete work items are run, they may queue
new session delete work items, which the second __flush_workqueue will
run.
In l2tp_exit_net, warn if any of the net's idr lists are not empty.
Fixes: fc7ec7f554 ("l2tp: delete sessions using work queue")
Signed-off-by: James Chapman <jchapman@katalix.com>
Link: https://patch.msgid.link/20240823142257.692667-1-jchapman@katalix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
<tldr>
skb network header of the single-tagged vlan packet continues to point the
vlan payload (e.g. IP) after second vlan tag is pushed by tc act_vlan. This
causes problem at the dissector which expects double-tagged packet network
header to point to the inner vlan.
The fix is to adjust network header in tcf_act_vlan.c but requires
refactoring of skb_vlan_push function.
</tldr>
Consider the following shell script snippet configuring TC rules on the
veth interface:
ip link add veth0 type veth peer veth1
ip link set veth0 up
ip link set veth1 up
tc qdisc add dev veth0 clsact
tc filter add dev veth0 ingress pref 10 chain 0 flower \
num_of_vlans 2 cvlan_ethtype 0x800 action goto chain 5
tc filter add dev veth0 ingress pref 20 chain 0 flower \
num_of_vlans 1 action vlan push id 100 \
protocol 0x8100 action goto chain 5
tc filter add dev veth0 ingress pref 30 chain 5 flower \
num_of_vlans 2 cvlan_ethtype 0x800 action simple sdata "success"
Sending double-tagged vlan packet with the IP payload inside:
cat <<ENDS | text2pcap - - | tcpreplay -i veth1 -
0000 00 00 00 00 00 11 00 00 00 00 00 22 81 00 00 64 ..........."...d
0010 81 00 00 14 08 00 45 04 00 26 04 d2 00 00 7f 11 ......E..&......
0020 18 ef 0a 00 00 01 14 00 00 02 00 00 00 00 00 12 ................
0030 e1 c7 00 00 00 00 00 00 00 00 00 00 ............
ENDS
will match rule 10, goto rule 30 in chain 5 and correctly emit "success" to
the dmesg.
OTOH, sending single-tagged vlan packet:
cat <<ENDS | text2pcap - - | tcpreplay -i veth1 -
0000 00 00 00 00 00 11 00 00 00 00 00 22 81 00 00 14 ..........."....
0010 08 00 45 04 00 2a 04 d2 00 00 7f 11 18 eb 0a 00 ..E..*..........
0020 00 01 14 00 00 02 00 00 00 00 00 16 e1 bf 00 00 ................
0030 00 00 00 00 00 00 00 00 00 00 00 00 ............
ENDS
will match rule 20, will push the second vlan tag but will *not* match
rule 30. IOW, the match at rule 30 fails if the second vlan was freshly
pushed by the kernel.
Lets look at __skb_flow_dissect working on the double-tagged vlan packet.
Here is the relevant code from around net/core/flow_dissector.c:1277
copy-pasted here for convenience:
if (dissector_vlan == FLOW_DISSECTOR_KEY_MAX &&
skb && skb_vlan_tag_present(skb)) {
proto = skb->protocol;
} else {
vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
data, hlen, &_vlan);
if (!vlan) {
fdret = FLOW_DISSECT_RET_OUT_BAD;
break;
}
proto = vlan->h_vlan_encapsulated_proto;
nhoff += sizeof(*vlan);
}
The "else" clause above gets the protocol of the encapsulated packet from
the skb data at the network header location. printk debugging has showed
that in the good double-tagged packet case proto is
htons(0x800 == ETH_P_IP) as expected. However in the single-tagged packet
case proto is garbage leading to the failure to match tc filter 30.
proto is being set from the skb header pointed by nhoff parameter which is
defined at the beginning of __skb_flow_dissect
(net/core/flow_dissector.c:1055 in the current version):
nhoff = skb_network_offset(skb);
Therefore the culprit seems to be that the skb network offset is different
between double-tagged packet received from the interface and single-tagged
packet having its vlan tag pushed by TC.
Lets look at the interesting points of the lifetime of the single/double
tagged packets as they traverse our packet flow.
Both of them will start at __netif_receive_skb_core where the first vlan
tag will be stripped:
if (eth_type_vlan(skb->protocol)) {
skb = skb_vlan_untag(skb);
if (unlikely(!skb))
goto out;
}
At this stage in double-tagged case skb->data points to the second vlan tag
while in single-tagged case skb->data points to the network (eg. IP)
header.
Looking at TC vlan push action (net/sched/act_vlan.c) we have the following
code at tcf_vlan_act (interesting points are in square brackets):
if (skb_at_tc_ingress(skb))
[1] skb_push_rcsum(skb, skb->mac_len);
....
case TCA_VLAN_ACT_PUSH:
err = skb_vlan_push(skb, p->tcfv_push_proto, p->tcfv_push_vid |
(p->tcfv_push_prio << VLAN_PRIO_SHIFT),
0);
if (err)
goto drop;
break;
....
out:
if (skb_at_tc_ingress(skb))
[3] skb_pull_rcsum(skb, skb->mac_len);
And skb_vlan_push (net/core/skbuff.c:6204) function does:
err = __vlan_insert_tag(skb, skb->vlan_proto,
skb_vlan_tag_get(skb));
if (err)
return err;
skb->protocol = skb->vlan_proto;
[2] skb->mac_len += VLAN_HLEN;
in the case of pushing the second tag. Lets look at what happens with
skb->data of the single-tagged packet at each of the above points:
1. As a result of the skb_push_rcsum, skb->data is moved back to the start
of the packet.
2. First VLAN tag is moved from the skb into packet buffer, skb->mac_len is
incremented, skb->data still points to the start of the packet.
3. As a result of the skb_pull_rcsum, skb->data is moved forward by the
modified skb->mac_len, thus pointing to the network header again.
Then __skb_flow_dissect will get confused by having double-tagged vlan
packet with the skb->data at the network header.
The solution for the bug is to preserve "skb->data at second vlan header"
semantics in the skb_vlan_push function. We do this by manipulating
skb->network_header rather than skb->mac_len. skb_vlan_push callers are
updated to do skb_reset_mac_len.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ipv6_setsockopt() can directly call ip_setsockopt()
instead of going through udp_prot.setsockopt()
ipv6_getsockopt() can directly call ip_getsockopt()
instead of going through udp_prot.getsockopt()
These indirections predate git history, not sure why they
were there.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240823140019.3727643-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The macro sk_for_each_bound_bhash accepts a parameter
__sk, but it was not used, rather the sk2 is directly
used, so we replace the sk2 with __sk in macro.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240823070453.3327832-1-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We found that one close-wait socket was reset by the other side
due to a new connection reusing the same port which is beyond our
expectation, so we have to investigate the underlying reason.
The following experiment is conducted in the test environment. We
limit the port range from 40000 to 40010 and delay the time to close()
after receiving a fin from the active close side, which can help us
easily reproduce like what happened in production.
Here are three connections captured by tcpdump:
127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965525191
127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 2769915070
127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1
127.0.0.1.40002 > 127.0.0.1.9999: Flags [F.], seq 1, ack 1
// a few seconds later, within 60 seconds
127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730
127.0.0.1.9999 > 127.0.0.1.40002: Flags [.], ack 2
127.0.0.1.40002 > 127.0.0.1.9999: Flags [R], seq 2965525193
// later, very quickly
127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730
127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 3120990805
127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1
As we can see, the first flow is reset because:
1) client starts a new connection, I mean, the second one
2) client tries to find a suitable port which is a timewait socket
(its state is timewait, substate is fin_wait2)
3) client occupies that timewait port to send a SYN
4) server finds a corresponding close-wait socket in ehash table,
then replies with a challenge ack
5) client sends an RST to terminate this old close-wait socket.
I don't think the port selection algo can choose a FIN_WAIT2 socket
when we turn on tcp_tw_reuse because on the server side there
remain unread data. In some cases, if one side haven't call close() yet,
we should not consider it as expendable and treat it at will.
Even though, sometimes, the server isn't able to call close() as soon
as possible like what we expect, it can not be terminated easily,
especially due to a second unrelated connection happening.
After this patch, we can see the expected failure if we start a
connection when all the ports are occupied in fin_wait2 state:
"Ncat: Cannot assign requested address."
Reported-by: Jade Dong <jadedong@tencent.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240823001152.31004-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Although commit 4a4cd70369 ("l2tp: don't set sk_user_data in tunnel socket")
removed sk->sk_user_data usage, setup_udp_tunnel_sock() still touches
sk->sk_user_data, this conflicts with sockmap which also leverages
sk->sk_user_data to save psock.
Restore this sk->sk_user_data check to avoid such conflicts.
Fixes: 4a4cd70369 ("l2tp: don't set sk_user_data in tunnel socket")
Reported-by: syzbot+8dbe3133b840c470da0e@syzkaller.appspotmail.com
Cc: Tom Parkin <tparkin@katalix.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Tested-by: James Chapman <jchapman@katalix.com>
Reviewed-by: James Chapman <jchapman@katalix.com>
Link: https://patch.msgid.link/20240822182544.378169-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When calculating size of own domain based on number of peers, the result
should be less than MAX_MON_DOMAIN, so using min() here is very semantic.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822133908.1042240-8-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When coping sockaddr in ip6_mc_msfget(), the time of copies
depends on the minimum value between sl_count and gf_numsrc.
Using min() here is very semantic.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822133908.1042240-7-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When processing the tail append of sk buffer, the final length needs
to be determined based on expectlen and addlen. Using max() here can
increase the readability of the code.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822133908.1042240-4-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enhance the ethtool cable test interface by introducing the ability to
specify the source of the diagnostic information for cable test results.
This is particularly useful for PHYs that offer multiple diagnostic
methods, such as Time Domain Reflectometry (TDR) and Active Link Cable
Diagnostic (ALCD).
Key changes:
- Added `ethnl_cable_test_result_with_src` and
`ethnl_cable_test_fault_length_with_src` functions to allow specifying
the information source when reporting cable test results.
- Updated existing `ethnl_cable_test_result` and
`ethnl_cable_test_fault_length` functions to use TDR as the default
source, ensuring backward compatibility.
- Modified the UAPI to support these new attributes, enabling drivers to
provide more detailed diagnostic information.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240822120703.1393130-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify netpoll_setup() and __netpoll_setup() to ensure that the netpoll
structure (np) is left in a clean state if setup fails for any reason.
This prevents carrying over misconfigured fields in case of partial
setup success.
Key changes:
- np->dev is now set only after successful setup, ensuring it's always
NULL if netpoll is not configured or if netpoll_setup() fails.
- np->local_ip is zeroed if netpoll setup doesn't complete successfully.
- Added DEBUG_NET_WARN_ON_ONCE() checks to catch unexpected states.
- Reordered some operations in __netpoll_setup() for better logical flow.
These changes improve the reliability of netpoll configuration, since it
assures that the structure is fully initialized or totally unset.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240822111051.179850-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZsiMrQAKCRDbK58LschI
g1mtAP9wBoNO9sNRrJ2OUg69R5uSTT2//v7icN01xwVtx9ir/AD+PJ+v/WG1QVlM
6GNsPoGtQ53ptuiJFfXEkuVELGqKywY=
=I/T4
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-08-23
We've added 10 non-merge commits during the last 15 day(s) which contain
a total of 10 files changed, 222 insertions(+), 190 deletions(-).
The main changes are:
1) Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case
when long-lived sockets miss a chance to set additional callbacks
if a sockops program was not attached early in their lifetime,
from Alan Maguire.
2) Add a batch of BPF selftest improvements which fix a few bugs and add
missing features to improve the test coverage of sockmap/sockhash,
from Michal Luczaj.
3) Fix a false-positive Smatch-reported off-by-one in tcp_validate_cookie()
which is part of the test_tcp_custom_syncookie BPF selftest,
from Kuniyuki Iwashima.
4) Fix the flow_dissector BPF selftest which had a bug in IP header's
tot_len calculation doing subtraction after htons() instead of inside
htons(), from Asbjørn Sloth Tønnesen.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftest: bpf: Remove mssind boundary check in test_tcp_custom_syncookie.c.
selftests/bpf: Introduce __attribute__((cleanup)) in create_pair()
selftests/bpf: Exercise SOCK_STREAM unix_inet_redir_to_connected()
selftests/bpf: Honour the sotype of af_unix redir tests
selftests/bpf: Simplify inet_socketpair() and vsock_socketpair_connectible()
selftests/bpf: Socket pair creation, cleanups
selftests/bpf: Support more socket types in create_pair()
selftests/bpf: Avoid subtraction after htons() in ipip tests
selftests/bpf: add sockopt tests for TCP_BPF_SOCK_OPS_CB_FLAGS
bpf/bpf_get,set_sockopt: add option to set TCP-BPF sock ops flags
====================
Link: https://patch.msgid.link/20240823134959.1091-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=O8tu
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
Patch #1 fix checksum calculation in nfnetlink_queue with SCTP,
segment GSO packet since skb_zerocopy() does not support
GSO_BY_FRAGS, from Antonio Ojea.
Patch #2 extend nfnetlink_queue coverage to handle SCTP packets,
from Antonio Ojea.
Patch #3 uses consume_skb() instead of kfree_skb() in nfnetlink,
from Donald Hunter.
Patch #4 adds a dedicate commit list for sets to speed up
intra-transaction lookups, from Florian Westphal.
Patch #5 skips removal of element from abort path for the pipapo
backend, ditching the shadow copy of this datastructure
is sufficient.
Patch #6 moves nf_ct_netns_get() out of nf_conncount_init() to
let users of conncoiunt decide when to enable conntrack,
this is needed by openvswitch, from Xin Long.
Patch #7 pass context to all nft_parse_register_load() in
preparation for the next patch.
Patches #8 and #9 reject loads from uninitialized registers from
control plane to remove register initialization from
datapath. From Florian Westphal.
* tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: don't initialize registers in nft_do_chain()
netfilter: nf_tables: allow loads only when register is initialized
netfilter: nf_tables: pass context structure to nft_parse_register_load
netfilter: move nf_ct_netns_get out of nf_conncount_init
netfilter: nf_tables: do not remove elements if set backend implements .abort
netfilter: nf_tables: store new sets in dedicated list
netfilter: nfnetlink: convert kfree_skb to consume_skb
selftests: netfilter: nft_queue.sh: sctp coverage
netfilter: nfnetlink_queue: unbreak SCTP traffic
====================
Link: https://patch.msgid.link/20240822221939.157858-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 5fbf57a937 ("net: netlink: remove the cb_mutex "injection" from
netlink core") has removed the usage of the 'dump_cb_mutex' field from the
struct netlink_sock.
Remove the field itself now. It saves a few bytes in the structure.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When net devices propagate xdp configurations to slave devices,
we will need to perform a memory provider check to ensure we're
not binding xdp to a device using unreadable netmem.
Currently the ->ndo_bpf calls in a few places. Adding checks to all
these places would not be ideal.
Refactor all the ->ndo_bpf calls into one place where we can add this
check in the future.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The initial value of err is -ENOMEM, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ETH_SS_PHY_STATS command gets PHY statistics. Use the phydev pointer
from the ethnl request to allow query phy stats from each PHY on the
link.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cable testing is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
PSE and PD configuration is a PHY-specific command. Instead of targeting
the command towards dev->phydev, use the request to pick the targeted
PHY device.
As we don't get the PHY directly from the netdev's attached phydev, also
adjust the error messages.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
PLCA is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we have the ability to track the PHYs connected to a net_device
through the link_topology, we can expose this list to userspace. This
allows userspace to use these identifiers for phy-specific commands and
take the decision of which PHY to target by knowing the link topology.
Add PHY_GET and PHY_DUMP, which can be a filtered DUMP operation to list
devices on only one interface.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some netlink commands are target towards ethernet PHYs, to control some
of their features. As there's several such commands, add the ability to
pass a PHY index in the ethnl request, which will populate the generic
ethnl_req_info with the passed phy_index.
Add a helper that netlink command handlers need to use to grab the
targeted PHY from the req_info. This helper needs to hold rtnl_lock()
while interacting with the PHY, as it may be removed at any point.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.
With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.
The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.
Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.
The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.
This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.
The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to. The PHY index can be
re-used for PHYs that are persistent.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.h
c948c0973d ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops")
f2878cdeb7 ("bnxt_en: Add support to call FW to update a VNIC")
Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unmask the upper DSCP bits when performing source validation and routing
a packet using the same route from a previously processed packet (hint).
In the future, this will allow us to perform the FIB lookup that is
performed as part of source validation according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-13-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unmask the upper DSCP bits when performing source validation for
multicast packets during early demux. In the future, this will allow us
to perform the FIB lookup which is performed as part of source
validation according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-12-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Align the ICMP code to other callers of ip_route_input() and pass the
full DS field. In the future this will allow us to perform a route
lookup according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-11-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unmask the upper DSCP bits when looking up an input route via the
RTM_GETROUTE netlink message so that in the future the lookup could be
performed according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-10-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unmask the upper DSCP bits in input route lookup so that in the future
the lookup could be performed according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-9-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As explained in commit 35ebf65e85 ("ipv4: Create and use
fib_compute_spec_dst() helper."), the function is used - for example -
to determine the source address for an ICMP reply. If we are responding
to a multicast or broadcast packet, the source address is set to the
source address that we would use if we were to send a packet to the
unicast source of the original packet. This address is determined by
performing a FIB lookup and using the preferred source address of the
resulting route.
Unmask the upper DSCP bits of the DS field of the packet that triggered
the reply so that in the future the FIB lookup could be performed
according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-8-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unmask the upper DSCP bits when calling ipmr_fib_lookup() so that in the
future it could perform the FIB lookup according to the full DSCP value.
Note that ipmr_fib_lookup() performs a FIB rule lookup (returning the
relevant routing table) and that IPv4 multicast FIB rules do not support
matching on TOS / DSCP. However, it is still worth unmasking the upper
DSCP bits in case support for DSCP matching is ever added.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a similar fashion to the iptables rpfilter match, unmask the upper
DSCP bits of the DS field of the currently tested packet so that in the
future the FIB lookup could be performed according to the full DSCP
value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rpfilter match performs a reverse path filter test on a packet by
performing a FIB lookup with the source and destination addresses
swapped.
Unmask the upper DSCP bits of the DS field of the tested packet so that
in the future the FIB lookup could be performed according to the full
DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Record Route IP option records the addresses of the routers that
routed the packet. In the case of forwarded packets, the kernel performs
a route lookup via fib_lookup() and fills in the preferred source
address of the matched route.
Unmask the upper DSCP bits when performing the lookup so that in the
future the lookup could be performed according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NETLINK_FIB_LOOKUP netlink family can be used to perform a FIB
lookup according to user provided parameters and communicate the result
back to user space.
Unmask the upper DSCP bits of the user-provided DS field before invoking
the IPv4 FIB lookup API so that in the future the lookup could be
performed according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The helper performs a FIB lookup according to the parameters in the
'params' argument, one of which is 'tos'. According to the test in
test_tc_neigh_fib.c, it seems that BPF programs are expected to
initialize the 'tos' field to the full 8 bit DS field from the IPv4
header.
Unmask the upper DSCP bits before invoking the IPv4 FIB lookup APIs so
that in the future the lookup could be performed according to the full
DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
iucv_alloc_device() gets a format string and a varying number of
arguments. This is incorrectly forwarded by calling dev_set_name() with
the format string and a va_list, while dev_set_name() expects also a
varying number of arguments.
Symptoms:
Corrupted iucv device names, which can result in log messages like:
sysfs: cannot create duplicate filename '/devices/iucv/hvc_iucv1827699952'
Fixes: 4452e8ef8c ("s390/iucv: Provide iucv_alloc_device() / iucv_release_device()")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1228425
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20240821091337.3627068-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is something wrong with ovs_drop_reasons. ovs_drop_reasons[0] is
"OVS_DROP_LAST_ACTION", but OVS_DROP_LAST_ACTION == __OVS_DROP_REASON + 1,
which means that ovs_drop_reasons[1] should be "OVS_DROP_LAST_ACTION".
And as Adrian tested, without the patch, adding flow to drop packets
results in:
drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97)
origin: software
input port ifindex: 8
timestamp: Tue Aug 20 10:19:17 2024 859853461 nsec
protocol: 0x800
length: 98
original length: 98
drop reason: OVS_DROP_ACTION_ERROR
With the patch, the same results in:
drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97)
origin: software
input port ifindex: 8
timestamp: Tue Aug 20 10:16:13 2024 475856608 nsec
protocol: 0x800
length: 98
original length: 98
drop reason: OVS_DROP_LAST_ACTION
Fix this by initializing ovs_drop_reasons with index.
Fixes: 9d802da40b ("net: openvswitch: add last-action drop reason")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Tested-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240821123252.186305-1-dongml2@chinatelecom.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Vnhf
-----END PGP SIGNATURE-----
Merge tag 'nf-24-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 disable BH when collecting stats via hardware offload to ensure
concurrent updates from packet path do not result in losing stats.
From Sebastian Andrzej Siewior.
Patch #2 uses write seqcount to reset counters serialize against reader.
Also from Sebastian Andrzej Siewior.
Patch #3 ensures vlan header is in place before accessing its fields,
according to KMSAN splat triggered by syzbot.
* tag 'nf-24-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: flowtable: validate vlan header
netfilter: nft_counter: Synchronize nft_counter_reset() against reader.
netfilter: nft_counter: Disable BH in nft_counter_offload_stats().
====================
Link: https://patch.msgid.link/20240822101842.4234-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ensure there is sufficient room to access the protocol field of the
VLAN header, validate it once before the flowtable lookup.
=====================================================
BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32
nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline]
nf_ingress net/core/dev.c:5440 [inline]
Fixes: 4cd91f7c29 ("netfilter: flowtable: add vlan support")
Reported-by: syzbot+8407d9bb88cd4c6bf61a@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
