For some reason (ancient assembler?) the following build error is
reported by the kisskb:
kisskb/src/arch/xtensa/kernel/entry.S: Error: unknown pseudo-op: `.bss':
=> 2176
Change abbreviated '.bss' to the full '.section .bss, "aw"' to fix this
error.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In machine_setup(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.
Cc: stable@vger.kernel.org
Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220617115323.4046905-1-windhl@126.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In calibrate_ccount(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.
Cc: stable@vger.kernel.org
Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220617124432.4049006-1-windhl@126.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
I observed that for each of the shared file-backed page faults, we're very
likely to retry one more time for the 1st write fault upon no page. It's
because we'll need to release the mmap lock for dirty rate limit purpose
with balance_dirty_pages_ratelimited() (in fault_dirty_shared_page()).
Then after that throttling we return VM_FAULT_RETRY.
We did that probably because VM_FAULT_RETRY is the only way we can return
to the fault handler at that time telling it we've released the mmap lock.
However that's not ideal because it's very likely the fault does not need
to be retried at all since the pgtable was well installed before the
throttling, so the next continuous fault (including taking mmap read lock,
walk the pgtable, etc.) could be in most cases unnecessary.
It's not only slowing down page faults for shared file-backed, but also add
more mmap lock contention which is in most cases not needed at all.
To observe this, one could try to write to some shmem page and look at
"pgfault" value in /proc/vmstat, then we should expect 2 counts for each
shmem write simply because we retried, and vm event "pgfault" will capture
that.
To make it more efficient, add a new VM_FAULT_COMPLETED return code just to
show that we've completed the whole fault and released the lock. It's also
a hint that we should very possibly not need another fault immediately on
this page because we've just completed it.
This patch provides a ~12% perf boost on my aarch64 test VM with a simple
program sequentially dirtying 400MB shmem file being mmap()ed and these are
the time it needs:
Before: 650.980 ms (+-1.94%)
After: 569.396 ms (+-1.38%)
I believe it could help more than that.
We need some special care on GUP and the s390 pgfault handler (for gmap
code before returning from pgfault), the rest changes in the page fault
handlers should be relatively straightforward.
Another thing to mention is that mm_account_fault() does take this new
fault as a generic fault to be accounted, unlike VM_FAULT_RETRY.
I explicitly didn't touch hmm_vma_fault() and break_ksm() because they do
not handle VM_FAULT_RETRY even with existing code, so I'm literally keeping
them as-is.
Link: https://lkml.kernel.org/r/20220530183450.42886-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm part]
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Will Deacon <will@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Chris Zankel <chris@zankel.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
of Peter Zijlstra was encountering with ptrace in his freezer rewrite
I identified some cleanups to ptrace_stop that make sense on their own
and move make resolving the other problems much simpler.
The biggest issue is the habbit of the ptrace code to change task->__state
from the tracer to suppress TASK_WAKEKILL from waking up the tracee. No
other code in the kernel does that and it is straight forward to update
signal_wake_up and friends to make that unnecessary.
Peter's task freezer sets frozen tasks to a new state TASK_FROZEN and
then it stores them by calling "wake_up_state(t, TASK_FROZEN)" relying
on the fact that all stopped states except the special stop states can
tolerate spurious wake up and recover their state.
The state of stopped and traced tasked is changed to be stored in
task->jobctl as well as in task->__state. This makes it possible for
the freezer to recover tasks in these special states, as well as
serving as a general cleanup. With a little more work in that
direction I believe TASK_STOPPED can learn to tolerate spurious wake
ups and become an ordinary stop state.
The TASK_TRACED state has to remain a special state as the registers for
a process are only reliably available when the process is stopped in
the scheduler. Fundamentally ptrace needs acess to the saved
register values of a task.
There are bunch of semi-random ptrace related cleanups that were found
while looking at these issues.
One cleanup that deserves to be called out is from commit 57b6de08b5
("ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs"). This
makes a change that is technically user space visible, in the handling
of what happens to a tracee when a tracer dies unexpectedly.
According to our testing and our understanding of userspace nothing
cares that spurious SIGTRAPs can be generated in that case.
The entire discussion can be found at:
https://lkml.kernel.org/r/87a6bv6dl6.fsf_-_@email.froward.int.ebiederm.org
Eric W. Biederman (11):
signal: Rename send_signal send_signal_locked
signal: Replace __group_send_sig_info with send_signal_locked
ptrace/um: Replace PT_DTRACE with TIF_SINGLESTEP
ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
ptrace: Remove arch_ptrace_attach
signal: Use lockdep_assert_held instead of assert_spin_locked
ptrace: Reimplement PTRACE_KILL by always sending SIGKILL
ptrace: Document that wait_task_inactive can't fail
ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs
ptrace: Don't change __state
ptrace: Always take siglock in ptrace_resume
Peter Zijlstra (1):
sched,signal,ptrace: Rework TASK_TRACED, TASK_STOPPED state
arch/ia64/include/asm/ptrace.h | 4 --
arch/ia64/kernel/ptrace.c | 57 ----------------
arch/um/include/asm/thread_info.h | 2 +
arch/um/kernel/exec.c | 2 +-
arch/um/kernel/process.c | 2 +-
arch/um/kernel/ptrace.c | 8 +--
arch/um/kernel/signal.c | 4 +-
arch/x86/kernel/step.c | 3 +-
arch/xtensa/kernel/ptrace.c | 4 +-
arch/xtensa/kernel/signal.c | 4 +-
drivers/tty/tty_jobctrl.c | 4 +-
include/linux/ptrace.h | 7 --
include/linux/sched.h | 10 ++-
include/linux/sched/jobctl.h | 8 +++
include/linux/sched/signal.h | 20 ++++--
include/linux/signal.h | 3 +-
kernel/ptrace.c | 87 ++++++++---------------
kernel/sched/core.c | 5 +-
kernel/signal.c | 140 +++++++++++++++++---------------------
kernel/time/posix-cpu-timers.c | 6 +-
20 files changed, 140 insertions(+), 240 deletions(-)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=ZUuO
-----END PGP SIGNATURE-----
Merge tag 'ptrace_stop-cleanup-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace_stop cleanups from Eric Biederman:
"While looking at the ptrace problems with PREEMPT_RT and the problems
Peter Zijlstra was encountering with ptrace in his freezer rewrite I
identified some cleanups to ptrace_stop that make sense on their own
and move make resolving the other problems much simpler.
The biggest issue is the habit of the ptrace code to change
task->__state from the tracer to suppress TASK_WAKEKILL from waking up
the tracee. No other code in the kernel does that and it is straight
forward to update signal_wake_up and friends to make that unnecessary.
Peter's task freezer sets frozen tasks to a new state TASK_FROZEN and
then it stores them by calling "wake_up_state(t, TASK_FROZEN)" relying
on the fact that all stopped states except the special stop states can
tolerate spurious wake up and recover their state.
The state of stopped and traced tasked is changed to be stored in
task->jobctl as well as in task->__state. This makes it possible for
the freezer to recover tasks in these special states, as well as
serving as a general cleanup. With a little more work in that
direction I believe TASK_STOPPED can learn to tolerate spurious wake
ups and become an ordinary stop state.
The TASK_TRACED state has to remain a special state as the registers
for a process are only reliably available when the process is stopped
in the scheduler. Fundamentally ptrace needs acess to the saved
register values of a task.
There are bunch of semi-random ptrace related cleanups that were found
while looking at these issues.
One cleanup that deserves to be called out is from commit 57b6de08b5
("ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs"). This
makes a change that is technically user space visible, in the handling
of what happens to a tracee when a tracer dies unexpectedly. According
to our testing and our understanding of userspace nothing cares that
spurious SIGTRAPs can be generated in that case"
* tag 'ptrace_stop-cleanup-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched,signal,ptrace: Rework TASK_TRACED, TASK_STOPPED state
ptrace: Always take siglock in ptrace_resume
ptrace: Don't change __state
ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs
ptrace: Document that wait_task_inactive can't fail
ptrace: Reimplement PTRACE_KILL by always sending SIGKILL
signal: Use lockdep_assert_held instead of assert_spin_locked
ptrace: Remove arch_ptrace_attach
ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
ptrace/um: Replace PT_DTRACE with TIF_SINGLESTEP
signal: Replace __group_send_sig_info with send_signal_locked
signal: Rename send_signal send_signal_locked
ordinary user mode tasks.
In commit 40966e316f ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
The commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple enough
to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code sitting
in linux-next.
Link: https://lkml.kernel.org/r/87mtfu4up3.fsf@email.froward.int.ebiederm.org
Eric W. Biederman (8):
kthread: Don't allocate kthread_struct for init and umh
fork: Pass struct kernel_clone_args into copy_thread
fork: Explicity test for idle tasks in copy_thread
fork: Generalize PF_IO_WORKER handling
init: Deal with the init process being a user mode process
fork: Explicitly set PF_KTHREAD
fork: Stop allowing kthreads to call execve
sched: Update task_tick_numa to ignore tasks without an mm
arch/alpha/kernel/process.c | 13 ++++++------
arch/arc/kernel/process.c | 13 ++++++------
arch/arm/kernel/process.c | 12 ++++++-----
arch/arm64/kernel/process.c | 12 ++++++-----
arch/csky/kernel/process.c | 15 ++++++-------
arch/h8300/kernel/process.c | 10 ++++-----
arch/hexagon/kernel/process.c | 12 ++++++-----
arch/ia64/kernel/process.c | 15 +++++++------
arch/m68k/kernel/process.c | 12 ++++++-----
arch/microblaze/kernel/process.c | 12 ++++++-----
arch/mips/kernel/process.c | 13 ++++++------
arch/nios2/kernel/process.c | 12 ++++++-----
arch/openrisc/kernel/process.c | 12 ++++++-----
arch/parisc/kernel/process.c | 18 +++++++++-------
arch/powerpc/kernel/process.c | 15 +++++++------
arch/riscv/kernel/process.c | 12 ++++++-----
arch/s390/kernel/process.c | 12 ++++++-----
arch/sh/kernel/process_32.c | 12 ++++++-----
arch/sparc/kernel/process_32.c | 12 ++++++-----
arch/sparc/kernel/process_64.c | 12 ++++++-----
arch/um/kernel/process.c | 15 +++++++------
arch/x86/include/asm/fpu/sched.h | 2 +-
arch/x86/include/asm/switch_to.h | 8 +++----
arch/x86/kernel/fpu/core.c | 4 ++--
arch/x86/kernel/process.c | 18 +++++++++-------
arch/xtensa/kernel/process.c | 17 ++++++++-------
fs/exec.c | 8 ++++---
include/linux/sched/task.h | 8 +++++--
init/initramfs.c | 2 ++
init/main.c | 2 +-
kernel/fork.c | 46 +++++++++++++++++++++++++++++++++-------
kernel/sched/fair.c | 2 +-
kernel/umh.c | 6 +++---
33 files changed, 234 insertions(+), 160 deletions(-)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=x6fy
-----END PGP SIGNATURE-----
Merge tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull kthread updates from Eric Biederman:
"This updates init and user mode helper tasks to be ordinary user mode
tasks.
Commit 40966e316f ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
Here, commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple
enough to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace
thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code
sitting in linux-next"
* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched: Update task_tick_numa to ignore tasks without an mm
fork: Stop allowing kthreads to call execve
fork: Explicitly set PF_KTHREAD
init: Deal with the init process being a user mode process
fork: Generalize PF_IO_WORKER handling
fork: Explicity test for idle tasks in copy_thread
fork: Pass struct kernel_clone_args into copy_thread
kthread: Don't allocate kthread_struct for init and umh
-----BEGIN PGP SIGNATURE-----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=SUr3
-----END PGP SIGNATURE-----
Merge tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"These updates continue to refine the work began in 5.17 and 5.18 of
modernizing the RNG's crypto and streamlining and documenting its
code.
New for 5.19, the updates aim to improve entropy collection methods
and make some initial decisions regarding the "premature next" problem
and our threat model. The cloc utility now reports that random.c is
931 lines of code and 466 lines of comments, not that basic metrics
like that mean all that much, but at the very least it tells you that
this is very much a manageable driver now.
Here's a summary of the various updates:
- The random_get_entropy() function now always returns something at
least minimally useful. This is the primary entropy source in most
collectors, which in the best case expands to something like RDTSC,
but prior to this change, in the worst case it would just return 0,
contributing nothing. For 5.19, additional architectures are wired
up, and architectures that are entirely missing a cycle counter now
have a generic fallback path, which uses the highest resolution
clock available from the timekeeping subsystem.
Some of those clocks can actually be quite good, despite the CPU
not having a cycle counter of its own, and going off-core for a
stamp is generally thought to increase jitter, something positive
from the perspective of entropy gathering. Done very early on in
the development cycle, this has been sitting in next getting some
testing for a while now and has relevant acks from the archs, so it
should be pretty well tested and fine, but is nonetheless the thing
I'll be keeping my eye on most closely.
- Of particular note with the random_get_entropy() improvements is
MIPS, which, on CPUs that lack the c0 count register, will now
combine the high-speed but short-cycle c0 random register with the
lower-speed but long-cycle generic fallback path.
- With random_get_entropy() now always returning something useful,
the interrupt handler now collects entropy in a consistent
construction.
- Rather than comparing two samples of random_get_entropy() for the
jitter dance, the algorithm now tests many samples, and uses the
amount of differing ones to determine whether or not jitter entropy
is usable and how laborious it must be. The problem with comparing
only two samples was that if the cycle counter was extremely slow,
but just so happened to be on the cusp of a change, the slowness
wouldn't be detected. Taking many samples fixes that to some
degree.
This, combined with the other improvements to random_get_entropy(),
should make future unification of /dev/random and /dev/urandom
maybe more possible. At the very least, were we to attempt it again
today (we're not), it wouldn't break any of Guenter's test rigs
that broke when we tried it with 5.18. So, not today, but perhaps
down the road, that's something we can revisit.
- We attempt to reseed the RNG immediately upon waking up from system
suspend or hibernation, making use of the various timestamps about
suspend time and such available, as well as the usual inputs such
as RDRAND when available.
- Batched randomness now falls back to ordinary randomness before the
RNG is initialized. This provides more consistent guarantees to the
types of random numbers being returned by the various accessors.
- The "pre-init injection" code is now gone for good. I suspect you
in particular will be happy to read that, as I recall you
expressing your distaste for it a few months ago. Instead, to avoid
a "premature first" issue, while still allowing for maximal amount
of entropy availability during system boot, the first 128 bits of
estimated entropy are used immediately as it arrives, with the next
128 bits being buffered. And, as before, after the RNG has been
fully initialized, it winds up reseeding anyway a few seconds later
in most cases. This resulted in a pretty big simplification of the
initialization code and let us remove various ad-hoc mechanisms
like the ugly crng_pre_init_inject().
- The RNG no longer pretends to handle the "premature next" security
model, something that various academics and other RNG designs have
tried to care about in the past. After an interesting mailing list
thread, these issues are thought to be a) mainly academic and not
practical at all, and b) actively harming the real security of the
RNG by delaying new entropy additions after a potential compromise,
making a potentially bad situation even worse. As well, in the
first place, our RNG never even properly handled the premature next
issue, so removing an incomplete solution to a fake problem was
particularly nice.
This allowed for numerous other simplifications in the code, which
is a lot cleaner as a consequence. If you didn't see it before,
https://lore.kernel.org/lkml/YmlMGx6+uigkGiZ0@zx2c4.com/ may be a
thread worth skimming through.
- While the interrupt handler received a separate code path years ago
that avoids locks by using per-cpu data structures and a faster
mixing algorithm, in order to reduce interrupt latency, input and
disk events that are triggered in hardirq handlers were still
hitting locks and more expensive algorithms. Those are now
redirected to use the faster per-cpu data structures.
- Rather than having the fake-crypto almost-siphash-based random32
implementation be used right and left, and in many places where
cryptographically secure randomness is desirable, the batched
entropy code is now fast enough to replace that.
- As usual, numerous code quality and documentation cleanups. For
example, the initialization state machine now uses enum symbolic
constants instead of just hard coding numbers everywhere.
- Since the RNG initializes once, and then is always initialized
thereafter, a pretty heavy amount of code used during that
initialization is never used again. It is now completely cordoned
off using static branches and it winds up in the .text.unlikely
section so that it doesn't reduce cache compactness after the RNG
is ready.
- A variety of functions meant for waiting on the RNG to be
initialized were only used by vsprintf, and in not a particularly
optimal way. Replacing that usage with a more ordinary setup made
it possible to remove those functions.
- A cleanup of how we warn userspace about the use of uninitialized
/dev/urandom and uninitialized get_random_bytes() usage.
Interestingly, with the change you merged for 5.18 that attempts to
use jitter (but does not block if it can't), the majority of users
should never see those warnings for /dev/urandom at all now, and
the one for in-kernel usage is mainly a debug thing.
- The file_operations struct for /dev/[u]random now implements
.read_iter and .write_iter instead of .read and .write, allowing it
to also implement .splice_read and .splice_write, which makes
splice(2) work again after it was broken here (and in many other
places in the tree) during the set_fs() removal. This was a bit of
a last minute arrival from Jens that hasn't had as much time to
bake, so I'll be keeping my eye on this as well, but it seems
fairly ordinary. Unfortunately, read_iter() is around 3% slower
than read() in my tests, which I'm not thrilled about. But Jens and
Al, spurred by this observation, seem to be making progress in
removing the bottlenecks on the iter paths in the VFS layer in
general, which should remove the performance gap for all drivers.
- Assorted other bug fixes, cleanups, and optimizations.
- A small SipHash cleanup"
* tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (49 commits)
random: check for signals after page of pool writes
random: wire up fops->splice_{read,write}_iter()
random: convert to using fops->write_iter()
random: convert to using fops->read_iter()
random: unify batched entropy implementations
random: move randomize_page() into mm where it belongs
random: remove mostly unused async readiness notifier
random: remove get_random_bytes_arch() and add rng_has_arch_random()
random: move initialization functions out of hot pages
random: make consistent use of buf and len
random: use proper return types on get_random_{int,long}_wait()
random: remove extern from functions in header
random: use static branch for crng_ready()
random: credit architectural init the exact amount
random: handle latent entropy and command line from random_init()
random: use proper jiffies comparison macro
random: remove ratelimiting for in-kernel unseeded randomness
random: move initialization out of reseeding hot path
random: avoid initializing twice in credit race
random: use symbolic constants for crng_init states
...
Return boolean values ("true" or "false") instead of 1 or 0 from bool
function. This fixes the following warnings from coccicheck:
./arch/xtensa/kernel/traps.c:304:10-11: WARNING: return of 0/1 in
function 'check_div0' with return type bool
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Message-Id: <20220518230953.112266-1-yang.lee@linux.alibaba.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
When call0 userspace ABI support by probing is enabled instructions that
cause illegal instruction exception when PS.WOE is clear are retried
with PS.WOE set before calling c-level exception handler. Record user pc
at which PS.WOE was set in the fast exception handler and clear PS.WOE
in the c-level exception handler if we get there from the same address.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
On xtensa cores wihout hardware division option division support
functions from libgcc react to division by 0 attempt by executing
illegal instruction followed by the characters 'DIV0'. Recognize this
pattern in illegal instruction exception handler and convert it to
division by 0.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In the event that random_get_entropy() can't access a cycle counter or
similar, falling back to returning 0 is really not the best we can do.
Instead, at least calling random_get_entropy_fallback() would be
preferable, because that always needs to return _something_, even
falling back to jiffies eventually. It's not as though
random_get_entropy_fallback() is super high precision or guaranteed to
be entropic, but basically anything that's not zero all the time is
better than returning zero all the time.
This is accomplished by just including the asm-generic code like on
other architectures, which means we can get rid of the empty stub
function here.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Add c-level handler for the division by zero exception and kill the task
if it was thrown from the kernel space or send SIGFPE otherwise.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa is the last user of the PT_SINGLESTEP flag. Changing tsk->ptrace in
user_enable_single_step and user_disable_single_step without locking could
potentiallly cause problems.
So use a thread info flag instead of a flag in tsk->ptrace. Use TIF_SINGLESTEP
that xtensa already had defined but unused.
Remove the definitions of PT_SINGLESTEP and PT_BLOCKSTEP as they have no more users.
Cc: stable@vger.kernel.org
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-4-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The commit a69755b187 ("xtensa simdisk: switch to proc_create_data()")
split read operation into two parts, first retrieving the path when it's
non-null and second retrieving the trailing '\n'. However when the path
is non-null the first simple_read_from_buffer updates ppos, and the
second simple_read_from_buffer returns 0 if ppos is greater than 1 (i.e.
almost always). As a result reading from that proc file is almost always
empty.
Fix it by making a temporary copy of the path with the trailing '\n' and
using simple_read_from_buffer on that copy.
Cc: stable@vger.kernel.org
Fixes: a69755b187 ("xtensa simdisk: switch to proc_create_data()")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Static variables do not need to be initialised to 0, because compiler
will initialise all uninitialised statics to 0. Thus, remove the
unneeded initializations.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Message-Id: <20220508022910.98481-1-wangborong@cdjrlc.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add fn and fn_arg members into struct kernel_clone_args and test for
them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER).
This allows any task that wants to be a user space task that only runs
in kernel mode to use this functionality.
The code on x86 is an exception and still retains a PF_KTHREAD test
because x86 unlikely everything else handles kthreads slightly
differently than user space tasks that start with a function.
The functions that created tasks that start with a function
have been updated to set ".fn" and ".fn_arg" instead of
".stack" and ".stack_size". These functions are fork_idle(),
create_io_thread(), kernel_thread(), and user_mode_thread().
Link: https://lkml.kernel.org/r/20220506141512.516114-4-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
With io_uring we have started supporting tasks that are for most
purposes user space tasks that exclusively run code in kernel mode.
The kernel task that exec's init and tasks that exec user mode
helpers are also user mode tasks that just run kernel code
until they call kernel execve.
Pass kernel_clone_args into copy_thread so these oddball
tasks can be supported more cleanly and easily.
v2: Fix spelling of kenrel_clone_args on h8300
Link: https://lkml.kernel.org/r/20220506141512.516114-2-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Don't use numeric labels for long jumps, use named local labels instead.
Avoid conditional label definition.
No functional changes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
When fast_store_prohibited needs to go to the C-level exception handler
it leaves TLB entry that caused page fault in the TLB. If the faulting
task gets switched to a different CPU and completes page table update
there the TLB entry will get out of sync with the page table which may
cause a livelock on access to that page.
Invalidate faulting TLB entry on a slow path exit from the
fast_store_prohibited.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Secondary reset vector is defined, compiled and used when
CONFIG_SECONDARY_RESET_VECTOR is enabled, not only on SMP.
Make declarations of _SecondaryResetVector_text_* symbols available
accordingly.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa kernels successfully build and run with
CONFIG_DEBUG_VM_PGTABLE=y, enable arch support for it.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Current coprocessor support on xtensa only works correctly on
uniprocessor configurations. Make it work on SMP too and keep it lazy.
Make coprocessor_owner array per-CPU and move it to struct exc_table for
easy access from the fast_coprocessor exception handler. Allow task to
have live coprocessors only on single CPU, record this CPU number in the
struct thread_info::cp_owner_cpu. Change struct thread_info::cpenable
meaning to be 'coprocessors live on cp_owner_cpu'.
Introduce C-level coprocessor exception handler that flushes and
releases live coprocessors of the task taking 'coprocessor disabled'
exception and call it from the fast_coprocessor handler when the task
has live coprocessors on other CPU.
Make coprocessor_flush_all and coprocessor_release_all work correctly
when called from any CPU by sending IPI to the cp_owner_cpu. Add
function coprocessor_flush_release_all to do flush followed by release
atomically. Add function local_coprocessors_flush_release_all to flush
and release all coprocessors on the local CPU and use it to flush
coprocessor contexts from the CPU that goes offline.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
coprocessor_flush is an ordinary function, it can use all registers.
Don't reserve stack frame for it and use a7 to preserve a0 around the
context saving call.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Both tables share the same offset field but the different function
pointers. Merge them into single table with 3-element entries to reduce
code and data duplication.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In order to let drivers use xtensa coprocessors on behalf of the calling
process the kernel must handle coprocessor exceptions from the kernel
mode the same way as from the user mode.
This is not sufficient to allow using coprocessors transparently in IRQ
or softirq context. Should such users exist they must be aware of the
context and do the right thing, e.g. preserve the coprocessor state and
resore it after use.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Instead of emulating call0 in fast_coprocessor use that opcode directly.
Use 'ret' instead of 'jx a0'.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use xtensa_set_sr instead of inline assembly.
Rename local variable exc_table in early_trap_init to avoid conflict
with per-CPU variable of the same name.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Exception handlers are currently passed as void pointers because they
may have one or two parameters. Only two handlers uses the second
parameter and it is available in the struct pt_regs anyway. Make all
handlers have only one parameter, introduce xtensa_exception_handler
type for handlers and use it in trap_set_handler.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Drop 'extern' from all function declarations and move those that need to
be visible from traps.c to traps.h. Add 'asmlinkage' to declarations of
fucntions defined in assembly. Add 'static' to declarations and
definitions only used locally. Add argument names in declarations.
Drop unused second argument from do_multihit and do_page_fault.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Prefix arch-specific barrier macros with '__' to make use of instrumented
generic macros.
Prefix arch-specific bitops with 'arch_' to make use of instrumented
generic functions.
Provide stubs for 64-bit atomics when building with KCSAN.
Disable KCSAN instrumentation in arch/xtensa/boot.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Marco Elver <elver@google.com>
There's no direct cputime_t manipulation in the xtensa arch code, so
generic virt CPU accounting may be enabled.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Put user exit context tracking call on the common kernel entry/exit path
(function calls are impossible at earlier kernel entry stages because
PS.EXCM is not cleared yet). Put user entry context tracking call on the
user exit path. Syscalls go through this common code too, so nothing
specific needs to be done for them.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Using plain register names is prone to errors when code is changed and
new calls are added between the register load and use. Change plain
register names to abi_* names in the call-heavy part of the kernel exit
code to clearly indicate what's supposed to be preserved and what's not.
Re-align code while at it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Context tracking call must be done after hardirq tracking call,
otherwise lockdep_assert_irqs_disabled called from rcu_eqs_exit gives
a warning. To avoid context tracking logic duplication for IRQ/exception
entry paths move trace_hardirqs_off call back to common entry code.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Many xtensa CPU cores without full MMU still have memory protection
features capable of raising exceptions for invalid instruction
fetches/data access. Allow handling such exceptions. This improves
behavior of processes that pass invalid memory pointers to syscalls in
noMMU configs: in case of exception the kernel instead of killing the
process is now able to return -EINVAL from a syscall.
Introduce CONFIG_PFAULT that controls whether protection fault code is
enabled and register handlers for common memory protection exceptions
when it is enabled.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Move full MMU-specific code into a separate function to isolate it from
more generic do_page_fault code. No functional changes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
asid_cache is only useful with full MMU, but fault.c is also useful with
MPU. Move asid_cache definition to MMU-specific source file.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Instead of storing pointers to callback functions in the
struct iss_net_private::tp move them to struct struct iss_net_ops and
store a const pointer to it. Make static const tuntap_ops structure with
tuntap callbacks and initialize tp.net_ops with it in the tuntap_probe.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Per-device locking in the ISS network driver is used to protect poll
timer and stats updates. Stat collection is not protected.
Remove per-device locking everywhere except the stats updates. Replace
ndo_get_stats callback with ndo_get_stats64 and use proper locking there
as well.
As a side effect this fixes possible deadlock between iss_net_close
and iss_net_timer.
Reported by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
iss_net_set_mac is just a copy of eth_mac_addr with pointless locking.
Drop this function and replace it with eth_mac_addr.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
opened_list is used to poll all opened devices in the timer callback,
but there's individual timer that is associated with each device.
Drop opened_list and only poll the device that is associated with the
timer in the timer callback.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Internal labels in the memmove implementation don't need to be visible,
localize them by prefixing their names with '.L'.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Fast coprocessor exception handler saves a3..a6, but coprocessor context
load/store code uses a4..a7 as temporaries, potentially clobbering a7.
'Potentially' because coprocessor state load/store macros may not use
all four temporary registers (and neither FPU nor HiFi macros do).
Use a3..a6 as intended.
Cc: stable@vger.kernel.org
Fixes: c658eac628 ("[XTENSA] Add support for configurable registers and coprocessors")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
There is a deadlock in rs_close(), which is shown
below:
(Thread 1) | (Thread 2)
| rs_open()
rs_close() | mod_timer()
spin_lock_bh() //(1) | (wait a time)
... | rs_poll()
del_timer_sync() | spin_lock() //(2)
(wait timer to stop) | ...
We hold timer_lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need timer_lock in position (2) of thread 2.
As a result, rs_close() will block forever.
This patch deletes the redundant timer_lock in order to
prevent the deadlock. Because there is no race condition
between rs_close, rs_open and rs_poll.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Message-Id: <20220407154430.22387-1-duoming@zju.edu.cn>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
These patch_text implementations are using stop_machine_cpuslocked
infrastructure with atomic cpu_count. The original idea: When the
master CPU patch_text, the others should wait for it. But current
implementation is using the first CPU as master, which couldn't
guarantee the remaining CPUs are waiting. This patch changes the
last CPU as the master to solve the potential risk.
Fixes: 64711f9a47 ("xtensa: implement jump_label support")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Message-Id: <20220407073323.743224-4-guoren@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
-----BEGIN PGP SIGNATURE-----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=84rW
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
$(shell ...) expands to empty. There is no need to assign it to _dummy.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
- do not zero buffer in set_memory_decrypted (Kirill A. Shutemov)
- fix return value of dma-debug __setup handlers (Randy Dunlap)
- swiotlb cleanups (Robin Murphy)
- remove most remaining users of the pci-dma-compat.h API
(Christophe JAILLET)
- share the ABI header for the DMA map_benchmark with userspace
(Tian Tao)
- update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen)
- remove CONFIG_DMA_REMAP (me)
-----BEGIN PGP SIGNATURE-----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=C+Es
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- do not zero buffer in set_memory_decrypted (Kirill A. Shutemov)
- fix return value of dma-debug __setup handlers (Randy Dunlap)
- swiotlb cleanups (Robin Murphy)
- remove most remaining users of the pci-dma-compat.h API
(Christophe JAILLET)
- share the ABI header for the DMA map_benchmark with userspace
(Tian Tao)
- update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen)
- remove CONFIG_DMA_REMAP (me)
* tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: benchmark: extract a common header file for map_benchmark definition
dma-debug: fix return value of __setup handlers
dma-mapping: remove CONFIG_DMA_REMAP
media: v4l2-pci-skeleton: Remove usage of the deprecated "pci-dma-compat.h" API
rapidio/tsi721: Remove usage of the deprecated "pci-dma-compat.h" API
sparc: Remove usage of the deprecated "pci-dma-compat.h" API
agp/intel: Remove usage of the deprecated "pci-dma-compat.h" API
alpha: Remove usage of the deprecated "pci-dma-compat.h" API
MAINTAINERS: update maintainer list of DMA MAPPING BENCHMARK
swiotlb: simplify array allocation
swiotlb: tidy up includes
swiotlb: simplify debugfs setup
swiotlb: do not zero buffer in set_memory_decrypted()
This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was
around task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled
making the semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where now anything left in tracehook.h is
some weird strange thing that is difficult to understand.
Eric W. Biederman (15):
ptrace: Move ptrace_report_syscall into ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Remove tracehook_signal_handler
task_work: Remove unnecessary include from posix_timers.h
task_work: Introduce task_work_pending
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
resume_user_mode: Move to resume_user_mode.h
tracehook: Remove tracehook.h
ptrace: Move setting/clearing ptrace_message into ptrace_stop
ptrace: Return the signal to continue with from ptrace_stop
Jann Horn (1):
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
Yang Li (1):
ptrace: Remove duplicated include in ptrace.c
MAINTAINERS | 1 -
arch/Kconfig | 5 +-
arch/alpha/kernel/ptrace.c | 5 +-
arch/alpha/kernel/signal.c | 4 +-
arch/arc/kernel/ptrace.c | 5 +-
arch/arc/kernel/signal.c | 4 +-
arch/arm/kernel/ptrace.c | 12 +-
arch/arm/kernel/signal.c | 4 +-
arch/arm64/kernel/ptrace.c | 14 +--
arch/arm64/kernel/signal.c | 4 +-
arch/csky/kernel/ptrace.c | 5 +-
arch/csky/kernel/signal.c | 4 +-
arch/h8300/kernel/ptrace.c | 5 +-
arch/h8300/kernel/signal.c | 4 +-
arch/hexagon/kernel/process.c | 4 +-
arch/hexagon/kernel/signal.c | 1 -
arch/hexagon/kernel/traps.c | 6 +-
arch/ia64/kernel/process.c | 4 +-
arch/ia64/kernel/ptrace.c | 6 +-
arch/ia64/kernel/signal.c | 1 -
arch/m68k/kernel/ptrace.c | 5 +-
arch/m68k/kernel/signal.c | 4 +-
arch/microblaze/kernel/ptrace.c | 5 +-
arch/microblaze/kernel/signal.c | 4 +-
arch/mips/kernel/ptrace.c | 5 +-
arch/mips/kernel/signal.c | 4 +-
arch/nds32/include/asm/syscall.h | 2 +-
arch/nds32/kernel/ptrace.c | 5 +-
arch/nds32/kernel/signal.c | 4 +-
arch/nios2/kernel/ptrace.c | 5 +-
arch/nios2/kernel/signal.c | 4 +-
arch/openrisc/kernel/ptrace.c | 5 +-
arch/openrisc/kernel/signal.c | 4 +-
arch/parisc/kernel/ptrace.c | 7 +-
arch/parisc/kernel/signal.c | 4 +-
arch/powerpc/kernel/ptrace/ptrace.c | 8 +-
arch/powerpc/kernel/signal.c | 4 +-
arch/riscv/kernel/ptrace.c | 5 +-
arch/riscv/kernel/signal.c | 4 +-
arch/s390/include/asm/entry-common.h | 1 -
arch/s390/kernel/ptrace.c | 1 -
arch/s390/kernel/signal.c | 5 +-
arch/sh/kernel/ptrace_32.c | 5 +-
arch/sh/kernel/signal_32.c | 4 +-
arch/sparc/kernel/ptrace_32.c | 5 +-
arch/sparc/kernel/ptrace_64.c | 5 +-
arch/sparc/kernel/signal32.c | 1 -
arch/sparc/kernel/signal_32.c | 4 +-
arch/sparc/kernel/signal_64.c | 4 +-
arch/um/kernel/process.c | 4 +-
arch/um/kernel/ptrace.c | 5 +-
arch/x86/kernel/ptrace.c | 1 -
arch/x86/kernel/signal.c | 5 +-
arch/x86/mm/tlb.c | 1 +
arch/xtensa/kernel/ptrace.c | 5 +-
arch/xtensa/kernel/signal.c | 4 +-
block/blk-cgroup.c | 2 +-
fs/coredump.c | 1 -
fs/exec.c | 1 -
fs/io-wq.c | 6 +-
fs/io_uring.c | 11 +-
fs/proc/array.c | 1 -
fs/proc/base.c | 1 -
include/asm-generic/syscall.h | 2 +-
include/linux/entry-common.h | 47 +-------
include/linux/entry-kvm.h | 2 +-
include/linux/posix-timers.h | 1 -
include/linux/ptrace.h | 81 ++++++++++++-
include/linux/resume_user_mode.h | 64 ++++++++++
include/linux/sched/signal.h | 17 +++
include/linux/task_work.h | 5 +
include/linux/tracehook.h | 226 -----------------------------------
include/uapi/linux/ptrace.h | 2 +-
kernel/entry/common.c | 19 +--
kernel/entry/kvm.c | 9 +-
kernel/exit.c | 3 +-
kernel/livepatch/transition.c | 1 -
kernel/ptrace.c | 47 +++++---
kernel/seccomp.c | 1 -
kernel/signal.c | 62 +++++-----
kernel/task_work.c | 4 +-
kernel/time/posix-cpu-timers.c | 1 +
mm/memcontrol.c | 2 +-
security/apparmor/domain.c | 1 -
security/selinux/hooks.c | 1 -
85 files changed, 372 insertions(+), 495 deletions(-)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEgjlraLDcwBA2B+6cC/v6Eiajj0AFAmJCQkoACgkQC/v6Eiaj
j0DCWQ/5AZVFU+hX32obUNCLackHTwgcCtSOs3JNBmNA/zL/htPiYYG0ghkvtlDR
Dw5J5DnxC6P7PVAdAqrpvx2uX2FebHYU0bRlyLx8LYUEP5dhyNicxX9jA882Z+vw
Ud0Ue9EojwGWS76dC9YoKUj3slThMATbhA2r4GVEoof8fSNJaBxQIqath44t0FwU
DinWa+tIOvZANGBZr6CUUINNIgqBIZCH/R4h6ArBhMlJpuQ5Ufk2kAaiWFwZCkX4
0LuuAwbKsCKkF8eap5I2KrIg/7zZVgxAg9O3cHOzzm8OPbKzRnNnQClcDe8perqp
S6e/f3MgpE+eavd1EiLxevZ660cJChnmikXVVh8ZYYoefaMKGqBaBSsB38bNcLjY
3+f2dB+TNBFRnZs1aCujK3tWBT9QyjZDKtCBfzxDNWBpXGLhHH6j6lA5Lj+Cef5K
/HNHFb+FuqedlFZh5m1Y+piFQ70hTgCa2u8b+FSOubI2hW9Zd+WzINV0ANaZ2LvZ
4YGtcyDNk1q1+c87lxP9xMRl/xi6rNg+B9T2MCo4IUnHgpSVP6VEB3osgUmrrrN0
eQlUI154G/AaDlqXLgmn1xhRmlPGfmenkxpok1AuzxvNJsfLKnpEwQSc13g3oiZr
disZQxNY0kBO2Nv3G323Z6PLinhbiIIFez6cJzK5v0YJ2WtO3pY=
=uEro
-----END PGP SIGNATURE-----
Merge tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
Here are the big set of tty and serial driver changes for 5.18-rc1.
Nothing major, some more good cleanups from Jiri and 2 new serial
drivers. Highlights include:
- termbits cleanups
- export symbol cleanups and other core cleanups from Jiri Slaby
- new sunplus and mvebu uart drivers (amazing that people are
still creating new uarts...)
- samsung serial driver cleanups
- ldisc 29 is now "reserved" for experimental/development line
disciplines
- lots of other tiny fixes and cleanups to serial drivers and
bindings
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkGznQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymnFwCgwGD/syV+BH2krgY6cRixZz72vPsAn2RSnicd
2YUwSNCHoL+B7hvQMtDG
=A3X9
-----END PGP SIGNATURE-----
Merge tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here are the big set of tty and serial driver changes for 5.18-rc1.
Nothing major, some more good cleanups from Jiri and 2 new serial
drivers. Highlights include:
- termbits cleanups
- export symbol cleanups and other core cleanups from Jiri Slaby
- new sunplus and mvebu uart drivers (amazing that people are still
creating new uarts...)
- samsung serial driver cleanups
- ldisc 29 is now "reserved" for experimental/development line
disciplines
- lots of other tiny fixes and cleanups to serial drivers and
bindings
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (104 commits)
vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE
serial: 8250: fix XOFF/XON sending when DMA is used
tty: serial: samsung: Add ARTPEC-8 support
dt-bindings: serial: samsung: Add ARTPEC-8 UART
serial: sc16is7xx: Clear RS485 bits in the shutdown
tty: serial: samsung: simplify getting OF match data
tty: serial: samsung: constify variables and pointers
tty: serial: samsung: constify s3c24xx_serial_drv_data members
tty: serial: samsung: constify UART name
tty: serial: samsung: constify s3c24xx_serial_drv_data
tty: serial: samsung: reduce number of casts
tty: serial: samsung: embed s3c2410_uartcfg in parent structure
tty: serial: samsung: embed s3c24xx_uart_info in parent structure
serial: 8250_tegra: mark acpi_device_id as unused with !ACPI
tty: serial: bcm63xx: use more precise Kconfig symbol
serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS
tty: serial: jsm: fix two assignments in if conditions
tty: serial: jsm: remove redundant assignments to variable linestatus
serial: 8250_mtk: make two read-only arrays static const
serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
...
Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
There will be two merge conflicts with your tree, one in MAINTAINERS
which is obvious to fix up, and one in drivers/phy/freescale/Kconfig
which also should be easy to resolve.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC
R4bgCjfg8BWIBcVVXg3/
=WWXC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
Merge yet more updates from Andrew Morton:
"This is the material which was staged after willystuff in linux-next.
Subsystems affected by this patch series: mm (debug, selftests,
pagecache, thp, rmap, migration, kasan, hugetlb, pagemap, madvise),
and selftests"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (113 commits)
selftests: kselftest framework: provide "finished" helper
mm: madvise: MADV_DONTNEED_LOCKED
mm: fix race between MADV_FREE reclaim and blkdev direct IO read
mm: generalize ARCH_HAS_FILTER_PGPROT
mm: unmap_mapping_range_tree() with i_mmap_rwsem shared
mm: warn on deleting redirtied only if accounted
mm/huge_memory: remove stale locking logic from __split_huge_pmd()
mm/huge_memory: remove stale page_trans_huge_mapcount()
mm/swapfile: remove stale reuse_swap_page()
mm/khugepaged: remove reuse_swap_page() usage
mm/huge_memory: streamline COW logic in do_huge_pmd_wp_page()
mm: streamline COW logic in do_swap_page()
mm: slightly clarify KSM logic in do_swap_page()
mm: optimize do_wp_page() for fresh pages in local LRU pagevecs
mm: optimize do_wp_page() for exclusive pages in the swapcache
mm/huge_memory: make is_transparent_hugepage() static
userfaultfd/selftests: enable hugetlb remap and remove event testing
selftests/vm: add hugetlb madvise MADV_DONTNEED MADV_REMOVE test
mm: enable MADV_DONTNEED for hugetlb mappings
kasan: disable LOCKDEP when printing reports
...
- remove dependency on the compiler's libgcc
- allow selection of internal kernel ABI via Kconfig
- enable compiler plugins support for gcc-12 or newer
- various minor cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=LW3T
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20220325' of https://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa updates from Max Filippov:
- remove dependency on the compiler's libgcc
- allow selection of internal kernel ABI via Kconfig
- enable compiler plugins support for gcc-12 or newer
- various minor cleanups and fixes
* tag 'xtensa-20220325' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: define update_mmu_tlb function
xtensa: fix xtensa_wsr always writing 0
xtensa: enable plugin support
xtensa: clean up kernel exit assembly code
xtensa: rearrange NMI exit path
xtensa: merge stack alignment definitions
xtensa: fix DTC warning unit_address_format
xtensa: fix stop_machine_cpuslocked call in patch_text
xtensa: make secondary reset vector support conditional
xtensa: add kernel ABI selection to Kconfig
xtensa: don't link with libgcc
xtensa: add helpers for division, remainder and shifts
xtensa: add missing XCHAL_HAVE_WINDOWED check
xtensa: use XCHAL_NUM_AREGS as pt_regs::areg size
xtensa: rename PT_SIZE to PT_KERNEL_SIZE
xtensa: Remove unused early_read_config_byte() et al declarations
xtensa: use strscpy to copy strings
net: xtensa: use strscpy to copy strings
MADV_DONTNEED historically rejects mlocked ranges, but with MLOCK_ONFAULT
and MCL_ONFAULT allowing to mlock without populating, there are valid use
cases for depopulating locked ranges as well.
Users mlock memory to protect secrets. There are allocators for secure
buffers that want in-use memory generally mlocked, but cleared and
invalidated memory to give up the physical pages. This could be done with
explicit munlock -> mlock calls on free -> alloc of course, but that adds
two unnecessary syscalls, heavy mmap_sem write locks, vma splits and
re-merges - only to get rid of the backing pages.
Users also mlockall(MCL_ONFAULT) to suppress sustained paging, but are
okay with on-demand initial population. It seems valid to selectively
free some memory during the lifetime of such a process, without having to
mess with its overall policy.
Why add a separate flag? Isn't this a pretty niche usecase?
- MADV_DONTNEED has been bailing on locked vmas forever. It's at least
conceivable that someone, somewhere is relying on mlock to protect
data from perhaps broader invalidation calls. Changing this behavior
now could lead to quiet data corruption.
- It also clarifies expectations around MADV_FREE and maybe
MADV_REMOVE. It avoids the situation where one quietly behaves
different than the others. MADV_FREE_LOCKED can be added later.
- The combination of mlock() and madvise() in the first place is
probably niche. But where it happens, I'd say that dropping pages
from a locked region once they don't contain secrets or won't page
anymore is much saner than relying on mlock to protect memory from
speculative or errant invalidation calls. It's just that we can't
change the default behavior because of the two previous points.
Given that, an explicit new flag seems to make the most sense.
[hannes@cmpxchg.org: fix mips build]
Link: https://lkml.kernel.org/r/20220304171912.305060-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
Hi Linus,
Please, pull the following treewide patch that replaces zero-length arrays with
flexible-array members. This patch has been baking in linux-next for a
whole development cycle.
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=xZD2
-----END PGP SIGNATURE-----
Merge tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array transformations from Gustavo Silva:
"Treewide patch that replaces zero-length arrays with flexible-array
members.
This has been baking in linux-next for a whole development cycle"
* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: Replace zero-length arrays with flexible-array members
There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good. This
was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly
tricky and error-prone code.
There is a small merge conflict against a parisc cleanup, the
solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel. The
hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
There are some obvious conflicts against changes to the removed
files.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks.
-----BEGIN PGP SIGNATURE-----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=vtCN
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
- Rewrite how munlock works to massively reduce the contention
on i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4ucgACgkQDpNsjXcp
gj69Wgf6AwqwmO5Tmy+fLScDPqWxmXJofbocae1kyoGHf7Ui91OK4U2j6IpvAr+g
P/vLIK+JAAcTQcrSCjymuEkf4HkGZOR03QQn7maPIEe4eLrZRQDEsmHC1L9gpeJp
s/GMvDWiGE0Tnxu0EOzfVi/yT+qjIl/S8VvqtCoJv1HdzxitZ7+1RDuqImaMC5MM
Qi3uHag78vLmCltLXpIOdpgZhdZexCdL2Y/1npf+b6FVkAJRRNUnA0gRbS7YpoVp
CbxEJcmAl9cpJLuj5i5kIfS9trr+/QcvbUlzRxh4ggC58iqnmF2V09l2MJ7YU3XL
v1O/Elq4lRhXninZFQEm9zjrri7LDQ==
=n9Ad
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
Before the commit f9ce0be71d ("mm: Cleanup faultaround and finish_fault()
codepaths") there was a call to update_mmu_cache in alloc_set_pte that
used to invalidate TLB entry caching invalid PTE that caused a page
fault. That commit removed that call so now invalid TLB entry survives
causing repetitive page faults on the CPU that took the initial fault
until that TLB entry is occasionally evicted. This issue is spotted by
the xtensa TLB sanity checker.
Fix this issue by defining update_mmu_tlb function that flushes TLB entry
for the faulting address.
Cc: stable@vger.kernel.org # 5.12+
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
We need to use this function in common code, so define it for
architectures and/or configrations that miss it. The result of
pmd_pfn() will only be used if TRANSPARENT_HUGEPAGE is enabled,
but a function or macro called pmd_pfn() must be defined, even
on machines with two level page tables.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
The commit cad6fade6e ("xtensa: clean up WSR*/RSR*/get_sr/set_sr")
replaced 'WSR' macro in the function xtensa_wsr with 'xtensa_set_sr',
but variable 'v' in the xtensa_set_sr body shadowed the argument 'v'
passed to it, resulting in wrong value written to debug registers.
Fix that by removing intermediate variable from the xtensa_set_sr
macro body.
Cc: stable@vger.kernel.org
Fixes: cad6fade6e ("xtensa: clean up WSR*/RSR*/get_sr/set_sr")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Compiler plugins can be built starting with xtensa gcc 12. Enable plugin
support for xtensa when gcc-12 or newer is used.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Don't use numeric labels for complex branching logic. Mark each branch
with named local label and use them. Rearrange exit back to kernel mode
to avoid conditional label definition.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
NMI exit path to userspace should neither check TIF_DB_DISABLED nor call
check_tlb_sanity because NMI shouldn't touch anything related to
userspace. Drop kernel/userspace check in NMI exit path.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa currently has two different definitions for stack alignment.
Replace it with single definition usable in both C and assembly.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Nowadays PC-style parallel ports come in the form of PCI and PCIe option
cards and there are some combined parallel/serial option cards as well
that we handle in the parport subsystem. There is nothing in particular
that would prevent them from being used in any system equipped with PCI
or PCIe connectivity, except that we do not permit the PARPORT_PC config
option to be selected for platforms for which ARCH_MIGHT_HAVE_PC_PARPORT
has not been set for.
The only PCI platforms that actually can't make use of PC-style parallel
port hardware are those newer PCIe systems that have no support for I/O
cycles in the host bridge, required by such parallel ports. Notably,
this includes the s390 arch, which has port I/O accessors that cause
compilation warnings (promoted to errors with `-Werror'), and there are
other cases such as the POWER9 PHB4 device, though this one has variable
port I/O accessors that depend on the particular system. Also it is not
clear whether the serial port side of devices enabled by PARPORT_SERIAL
uses port I/O or MMIO. Finally Super I/O solutions are always either
ISA or platform devices.
Make the PARPORT_PC option selectable also for PCI systems then, except
for the s390 arch, however limit the availability of PARPORT_PC_SUPERIO
to platforms that enable ARCH_MIGHT_HAVE_PC_PARPORT. Update platforms
accordingly for the required <asm/parport.h> header.
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2202141955550.34636@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DTC issues the following warnings when building xtfpga device trees:
/soc/flash@00000000/partition@0x0: unit name should not have leading "0x"
/soc/flash@00000000/partition@0x6000000: unit name should not have leading "0x"
/soc/flash@00000000/partition@0x6800000: unit name should not have leading "0x"
/soc/flash@00000000/partition@0x7fe0000: unit name should not have leading "0x"
Drop leading 0x from flash partition unit names.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
patch_text must invoke patch_text_stop_machine on all online CPUs, but
it calls stop_machine_cpuslocked with NULL cpumask. As a result only one
CPU runs patch_text_stop_machine potentially leaving stale icache
entries on other CPUs. Fix that by calling stop_machine_cpuslocked with
cpu_online_mask as the last argument.
Cc: stable@vger.kernel.org
Fixes: 64711f9a47 ("xtensa: implement jump_label support")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Move set_notify_resume and tracehook_notify_resume into resume_user_mode.h.
While doing that rename tracehook_notify_resume to resume_user_mode_work.
Update all of the places that included tracehook.h for these functions to
include resume_user_mode.h instead.
Update all of the callers of tracehook_notify_resume to call
resume_user_mode_work.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-12-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Rename tracehook_report_syscall_{entry,exit} to
ptrace_report_syscall_{entry,exit} and place them in ptrace.h
There is no longer any generic tracehook infractructure so make
these ptrace specific functions ptrace specific.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-3-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Whether xtensa cores start from primary or secondary reset vector is
configurable and may be chosen by board designer or controlled at
runtime. When secondary reset vector is unused its location in memory
may not be writable.
Make secondary reset vector support conditional and don't build and load
secondary reset vector code when it is disabled.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add choice to use default or call0 ABI for the kernel code. If call0 ABI
is chosen add '-mabi=call0' to the flags. The toolchain support for this
option is rather new so only enable it when the compiler supports it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
libgcc may be absent or may have different ABI than the kernel. Don't
link with it. Drop declarations and export for helpers that are not
implemented. Use generic versions of DI mode multiplication and
comparisons. Drop register window spilling helper as it should never be
used by the compiler-generated code.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add missing preprocessor conditions to secondary reset vector code.
Fixes: 09af39f649 ("xtensa: use register window specific opcodes only when present")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
struct pt_regs is used to access both kernel and user exception frames.
User exception frames may contain up to XCHAL_NUM_AREG registers that
task creation and signal delivery code may access, but pt_regs::areg
array has only 16 entries that cover only the kernel exception frame.
This results in the following build error:
arch/xtensa/kernel/process.c: In function 'copy_thread':
arch/xtensa/kernel/process.c:262:52: error: array subscript 53 is above
array bounds of 'long unsigned int[16]' [-Werror=array-bounds]
262 | put_user(regs->areg[caller_ars+1],
Change struct pt_regs::areg size to XCHAL_NUM_AREGS so that it covers
the whole user exception frame. Adjust task_pt_regs and drop additional
register copying code from copy_thread now that the whole user exception
stack frame is copied.
Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
PT_SIZE is used by the xtensa port to designate kernel exception frame
size. In preparation for struct pt_regs size change rename PT_SIZE to
PT_KERNEL_SIZE for clarity and change its definition to always cover
only the kernel exception frame.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
early_read_config_byte() and similar are declared but never defined.
Remove the unused declarations.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Message-Id: <20220121210258.1152803-1-helgaas@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The strlcpy should not be used because it doesn't limit the source
length. So that it will lead some potential bugs.
But the strscpy doesn't require reading memory from the src string
beyond the specified "count" bytes, and since the return value is
easier to error-check than strlcpy()'s. In addition, the implementation
is robust to the string changing out from underneath it, unlike the
current strlcpy() implementation.
Thus, replace strlcpy with strscpy.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Message-Id: <20211220084756.955307-1-wangborong@cdjrlc.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The strlcpy should not be used because it doesn't limit the source
length. So that it will lead some potential bugs.
But the strscpy doesn't require reading memory from the src string
beyond the specified "count" bytes, and since the return value is
easier to error-check than strlcpy()'s. In addition, the implementation
is robust to the string changing out from underneath it, unlike the
current strlcpy() implementation.
Thus, replace strlcpy with strscpy.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Message-Id: <20211220084602.952091-1-wangborong@cdjrlc.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20220303111905.321089-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit
baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CONFIG_DMA_REMAP is used to build a few helpers around the core
vmalloc code, and to use them in case there is a highmem page in
dma-direct, and to make dma coherent allocations be able to use
non-contiguous pages allocations for DMA allocations in the dma-iommu
layer.
Right now it needs to be explicitly selected by architectures, and
is only done so by architectures that require remapping to deal
with devices that are not DMA coherent. Make it unconditional for
builds with CONFIG_MMU as it is very little extra code, but makes
it much more likely that large DMA allocations succeed on x86.
This fixes hot plugging a NVMe thunderbolt SSD for me, which tries
to allocate a 1MB buffer that is otherwise hard to obtain due to
memory fragmentation on a heavily used laptop.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Christoph Hellwig and a few others spent a huge effort on removing
set_fs() from most of the important architectures, but about half the
other architectures were never completed even though most of them don't
actually use set_fs() at all.
I did a patch for microblaze at some point, which turned out to be fairly
generic, and now ported it to most other architectures, using new generic
implementations of access_ok() and __{get,put}_kernel_nocheck().
Three architectures (sparc64, ia64, and sh) needed some extra work,
which I also completed.
* 'set_fs-4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
uaccess: fix integer overflow on access_ok()
Remove arch specific termbits.h as there are only trivial space
differences between include/uapi/asm-generic/termbits.h and
arch/xtensa/include/uapi/asm/termbits.h.
$ diff -u0 -b -B include/uapi/asm-generic/termbits.h arch/xtensa/include/uapi/asm/termbits.h
. --- include/uapi/asm-generic/termbits.h 2022-01-10 13:44:42.814107461 +0200
. +++ arch/xtensa/include/uapi/asm/termbits.h 2022-01-10 13:44:42.690106926 +0200
. @@ -2,2 +2,15 @@
. -#ifndef __ASM_GENERIC_TERMBITS_H
. -#define __ASM_GENERIC_TERMBITS_H
. +/*
. + * include/asm-xtensa/termbits.h
. + *
. + * Copied from SH.
. + *
. + * This file is subject to the terms and conditions of the GNU General Public
. + * License. See the file "COPYING" in the main directory of this archive
. + * for more details.
. + *
. + * Copyright (C) 2001 - 2005 Tensilica Inc.
. + */
. +
. +#ifndef _XTENSA_TERMBITS_H
. +#define _XTENSA_TERMBITS_H
. +
. @@ -200 +221 @@
. -#endif /* __ASM_GENERIC_TERMBITS_H */
. +#endif /* _XTENSA_TERMBITS_H */
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220222115604.7351-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are no remaining callers of set_fs(), so CONFIG_SET_FS
can be removed globally, along with the thread_info field and
any references to it.
This turns access_ok() into a cheaper check against TASK_SIZE_MAX.
As CONFIG_SET_FS is now gone, drop all remaining references to
set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel().
Acked-by: Sam Ravnborg <sam@ravnborg.org> # for sparc32 changes
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Tested-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> # for arc changes
Acked-by: Stafford Horne <shorne@gmail.com> # [openrisc, asm-generic]
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are many different ways that access_ok() is defined across
architectures, but in the end, they all just compare against the
user_addr_max() value or they accept anything.
Provide one definition that works for most architectures, checking
against TASK_SIZE_MAX for user processes or skipping the check inside
of uaccess_kernel() sections.
For architectures without CONFIG_SET_FS(), this should be the fastest
check, as it comes down to a single comparison of a pointer against a
compile-time constant, while the architecture specific versions tend to
do something more complex for historic reasons or get something wrong.
Type checking for __user annotations is handled inconsistently across
architectures, but this is easily simplified as well by using an inline
function that takes a 'const void __user *' argument. A handful of
callers need an extra __user annotation for this.
Some architectures had trick to use 33-bit or 65-bit arithmetic on the
addresses to calculate the overflow, however this simpler version uses
fewer registers, which means it can produce better object code in the
end despite needing a second (statically predicted) branch.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64, asm-generic]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(next-20220214$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
UAPI and wireless changes were intentionally excluded from this patch
and will be sent out separately.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
asm/shmbuf.h is currently excluded from the UAPI compile-test because of
the errors like follows:
HDRTEST usr/include/asm/shmbuf.h
In file included from ./usr/include/asm/shmbuf.h:6,
from <command-line>:
./usr/include/asm-generic/shmbuf.h:26:33: error: field ‘shm_perm’ has incomplete type
26 | struct ipc64_perm shm_perm; /* operation perms */
| ^~~~~~~~
./usr/include/asm-generic/shmbuf.h:27:9: error: unknown type name ‘size_t’
27 | size_t shm_segsz; /* size of segment (bytes) */
| ^~~~~~
./usr/include/asm-generic/shmbuf.h:40:9: error: unknown type name ‘__kernel_pid_t’
40 | __kernel_pid_t shm_cpid; /* pid of creator */
| ^~~~~~~~~~~~~~
./usr/include/asm-generic/shmbuf.h:41:9: error: unknown type name ‘__kernel_pid_t’
41 | __kernel_pid_t shm_lpid; /* pid of last operator */
| ^~~~~~~~~~~~~~
The errors can be fixed by replacing size_t with __kernel_size_t and by
including proper headers.
Then, remove the no-header-test entry from user/include/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
linux/signal.h and asm/signal.h are currently excluded from the UAPI
compile-test because of the errors like follows:
HDRTEST usr/include/asm/signal.h
In file included from <command-line>:
./usr/include/asm/signal.h:103:9: error: unknown type name ‘size_t’
103 | size_t ss_size;
| ^~~~~~
The errors can be fixed by replacing size_t with __kernel_size_t.
Then, remove the no-header-test entries from user/include/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQHJBAABCgAzFiEEi8GdvG6xMhdgpu/4sUSA/TofvsgFAmHi+xgVHHl1cnkubm9y
b3ZAZ21haWwuY29tAAoJELFEgP06H77IxdoMAMf3E+L51Ys/4iAiyJQNVoT3aIBC
A8ZVOB9he1OA3o3wBNIRKmICHk+ovnfCWcXTr9fG/Ade2wJz88NAsGPQ1Phywb+s
iGlpySllFN72RT9ZqtJhLEzgoHHOL0CzTW07TN9GJy4gQA2h2G9CTP+OmsQdnVqE
m9Fn3PSlJ5lhzePlKfnln8rGZFgrriJakfEFPC79n/7an4+2Hvkb5rWigo7KQc4Z
9YNqYUcHWZFUgq80adxEb9LlbMXdD+Z/8fCjOrAatuwVkD4RDt6iKD0mFGjHXGL7
MZ9KRS8AfZXawmetk3jjtsV+/QkeS+Deuu7k0FoO0Th2QV7BGSDhsLXAS5By/MOC
nfSyHhnXHzCsBMyVNrJHmNhEZoN29+tRwI84JX9lWcf/OLANcCofnP6f2UIX7tZY
CAZAgVELp+0YQXdybrfzTQ8BT3TinjS/aZtCrYijRendI1GwUXcyl69vdOKqAHuk
5jy8k/xHyp+ZWu6v+PyAAAEGowY++qhL0fmszA==
=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
Remove PDE_DATA() completely and replace it with pde_data().
[akpm@linux-foundation.org: fix naming clash in drivers/nubus/proc.c]
[akpm@linux-foundation.org: now fix it properly]
Link: https://lkml.kernel.org/r/20211124081956.87711-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add new kconfig target 'make mod2noconfig', which will be useful to
speed up the build and test iteration.
- Raise the minimum supported version of LLVM to 11.0.0
- Refactor certs/Makefile
- Change the format of include/config/auto.conf to stop double-quoting
string type CONFIG options.
- Fix ARCH=sh builds in dash
- Separate compression macros for general purposes (cmd_bzip2 etc.) and
the ones for decompressors (cmd_bzip2_with_size etc.)
- Misc Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=8BQf
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new kconfig target 'make mod2noconfig', which will be useful to
speed up the build and test iteration.
- Raise the minimum supported version of LLVM to 11.0.0
- Refactor certs/Makefile
- Change the format of include/config/auto.conf to stop double-quoting
string type CONFIG options.
- Fix ARCH=sh builds in dash
- Separate compression macros for general purposes (cmd_bzip2 etc.) and
the ones for decompressors (cmd_bzip2_with_size etc.)
- Misc Makefile cleanups
* tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: add cmd_file_size
arch: decompressor: remove useless vmlinux.bin.all-y
kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}
kbuild: drop $(size_append) from cmd_zstd
sh: rename suffix-y to suffix_y
doc: kbuild: fix default in `imply` table
microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV}
certs: move scripts/extract-cert to certs/
kbuild: do not quote string values in include/config/auto.conf
kbuild: do not include include/config/auto.conf from shell scripts
certs: simplify $(srctree)/ handling and remove config_filename macro
kbuild: stop using config_filename in scripts/Makefile.modsign
certs: remove misleading comments about GCC PR
certs: refactor file cleaning
certs: remove unneeded -I$(srctree) option for system_certificates.o
certs: unify duplicated cmd_extract_certs and improve the log
certs: use $< and $@ to simplify the key generation rule
kbuild: remove headers_check stub
kbuild: move headers_check.pl to usr/include/
certs: use if_changed to re-generate the key when the key type is changed
...
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.orghttps://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.orghttps://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
Merge misc updates from Andrew Morton:
"146 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak,
dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap,
memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb,
userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp,
ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and
damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits)
mm/damon: hide kernel pointer from tracepoint event
mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log
mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging
mm/damon/dbgfs: remove an unnecessary variable
mm/damon: move the implementation of damon_insert_region to damon.h
mm/damon: add access checking for hugetlb pages
Docs/admin-guide/mm/damon/usage: update for schemes statistics
mm/damon/dbgfs: support all DAMOS stats
Docs/admin-guide/mm/damon/reclaim: document statistics parameters
mm/damon/reclaim: provide reclamation statistics
mm/damon/schemes: account how many times quota limit has exceeded
mm/damon/schemes: account scheme actions that successfully applied
mm/damon: remove a mistakenly added comment for a future feature
Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts
Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning
Docs/admin-guide/mm/damon/usage: remove redundant information
Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks
mm/damon: convert macro functions to static inline functions
mm/damon: modify damon_rand() macro to static inline function
mm/damon: move damon_rand() definition into damon.h
...
find_bit API and bitmap API are closely related, but inclusion paths
are different - include/asm-generic and include/linux, correspondingly.
In the past it made a lot of troubles due to circular dependencies
and/or undefined symbols. Fix this by moving find.h under include/linux.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Since commit 4064b98270 ("mm: allow VM_FAULT_RETRY for multiple
times") allowed VM_FAULT_RETRY for multiple times, the
FAULT_FLAG_ALLOW_RETRY bit of fault_flag will not be changed in the page
fault path, so the following check is no longer needed:
flags & FAULT_FLAG_ALLOW_RETRY
So just remove it.
[akpm@linux-foundation.org: coding style fixes]
Link: https://lkml.kernel.org/r/20211110123358.36511-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Peter Xu <peterx@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There have historically been two big uses of do_exit. The first is
it's design use to be the guts of the exit(2) system call. The second
use is to terminate a task after something catastrophic has happened
like a NULL pointer in kernel code. The function make_task_dead
has been added to accomidate the second use.
The call to do_exit in Linvalidmask is clearly not a normal userspace
exit. As failure handling there are two possible ways to go.
If userspace can trigger the issue force_exit_sig should be called.
Otherwise make_task_dead probably from the implementation of die
is appropriate.
Replace the call of do_exit in Linvalidmask with make_task_dead as
I don't know xtensa and especially xtensa assembly language well
enough to do anything else.
Link: https://lkml.kernel.org/r/YdUmN7n4W5YETUhW@zeniv-ca.linux.org.uk
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The previous commit fixed up all shell scripts to not include
include/config/auto.conf.
Now that include/config/auto.conf is only included by Makefiles,
we can change it into a more Make-friendly form.
Previously, Kconfig output string values enclosed with double-quotes
(both in the .config and include/config/auto.conf):
CONFIG_X="foo bar"
Unlike shell, Make handles double-quotes (and single-quotes as well)
verbatim. We must rip them off when used.
There are some patterns:
[1] $(patsubst "%",%,$(CONFIG_X))
[2] $(CONFIG_X:"%"=%)
[3] $(subst ",,$(CONFIG_X))
[4] $(shell echo $(CONFIG_X))
These are not only ugly, but also fragile.
[1] and [2] do not work if the value contains spaces, like
CONFIG_X=" foo bar "
[3] does not work correctly if the value contains double-quotes like
CONFIG_X="foo\"bar"
[4] seems to work better, but has a cost of forking a process.
Anyway, quoted strings were always PITA for our Makefiles.
This commit changes Kconfig to stop quoting in include/config/auto.conf.
These are the string type symbols referenced in Makefiles or scripts:
ACPI_CUSTOM_DSDT_FILE
ARC_BUILTIN_DTB_NAME
ARC_TUNE_MCPU
BUILTIN_DTB_SOURCE
CC_IMPLICIT_FALLTHROUGH
CC_VERSION_TEXT
CFG80211_EXTRA_REGDB_KEYDIR
EXTRA_FIRMWARE
EXTRA_FIRMWARE_DIR
EXTRA_TARGETS
H8300_BUILTIN_DTB
INITRAMFS_SOURCE
LOCALVERSION
MODULE_SIG_HASH
MODULE_SIG_KEY
NDS32_BUILTIN_DTB
NIOS2_DTB_SOURCE
OPENRISC_BUILTIN_DTB
SOC_CANAAN_K210_DTB_SOURCE
SYSTEM_BLACKLIST_HASH_LIST
SYSTEM_REVOCATION_KEYS
SYSTEM_TRUSTED_KEYS
TARGET_CPU
UNUSED_KSYMS_WHITELIST
XILINX_MICROBLAZE0_FAMILY
XILINX_MICROBLAZE0_HW_VER
XTENSA_VARIANT_NAME
I checked them one by one, and fixed up the code where necessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.
Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure. In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.
Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.
As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Naresh reported another architecture that was broken by the same typo that
was already fixed for three architectures: mips also refers to the
futex_atomic_op_inuser_local() function by the wrong name and runs into a
missing closing '}' as well.
Going through the source tree the same typo was found in the documentation
as well as in the xtensa code, both of which ended up escaping the
regression testing so far. In the case of xtensa, it appears that the
broken code path is only used when building for platforms that are not
supported by the default gcc configuration, so they are impossible to test
for with default setups.
After going through these more carefully and fixing up the typos, all
architectures have been build-tested again to ensure that this is now
complete.
Fixes: 4e0d846344 ("futex: Fix sparc32/m68k/nds32 build regression")
Fixes: 3f2bedabb6 ("futex: Ensure futex_atomic_cmpxchg_inatomic() is present")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20211203080823.2938839-1-arnd@kernel.org
The printk header file includes ratelimit_types.h for its __ratelimit()
based usage. It is required for the static initializer used in
printk_ratelimited(). It uses a raw_spinlock_t and includes the
spinlock_types.h.
PREEMPT_RT substitutes spinlock_t with a rtmutex based implementation and so
its spinlock_t implmentation (provided by spinlock_rt.h) includes rtmutex.h and
atomic.h which leads to recursive includes where defines are missing.
By including only the raw_spinlock_t defines it avoids the atomic.h
related includes at this stage.
An example on powerpc:
| CALL scripts/atomic/check-atomics.sh
|In file included from include/linux/bug.h:5,
| from include/linux/page-flags.h:10,
| from kernel/bounds.c:10:
|arch/powerpc/include/asm/page_32.h: In function âclear_pageâ:
|arch/powerpc/include/asm/bug.h:87:4: error: implicit declaration of function â=80=98__WARNâ=80=99 [-Werror=3Dimplicit-function-declaration]
| 87 | __WARN(); \
| | ^~~~~~
|arch/powerpc/include/asm/page_32.h:48:2: note: in expansion of macro âWARN_ONâ=99
| 48 | WARN_ON((unsigned long)addr & (L1_CACHE_BYTES - 1));
| | ^~~~~~~
|arch/powerpc/include/asm/bug.h:58:17: error: invalid application of âsizeofâ=99 to incomplete type âstruct bug_entryâ=99
| 58 | "i" (sizeof(struct bug_entry)), \
| | ^~~~~~
|arch/powerpc/include/asm/bug.h:89:3: note: in expansion of macro âBUG_ENTRYâ=99
| 89 | BUG_ENTRY(PPC_TLNEI " %4, 0", \
| | ^~~~~~~~~
|arch/powerpc/include/asm/page_32.h:48:2: note: in expansion of macro âWARN_ONâ=99
| 48 | WARN_ON((unsigned long)addr & (L1_CACHE_BYTES - 1));
| | ^~~~~~~
|In file included from arch/powerpc/include/asm/ptrace.h:298,
| from arch/powerpc/include/asm/hw_irq.h:12,
| from arch/powerpc/include/asm/irqflags.h:12,
| from include/linux/irqflags.h:16,
| from include/asm-generic/cmpxchg-local.h:6,
| from arch/powerpc/include/asm/cmpxchg.h:526,
| from arch/powerpc/include/asm/atomic.h:11,
| from include/linux/atomic.h:7,
| from include/linux/rwbase_rt.h:6,
| from include/linux/rwlock_types.h:55,
| from include/linux/spinlock_types.h:74,
| from include/linux/ratelimit_types.h:7,
| from include/linux/printk.h:10,
| from include/asm-generic/bug.h:22,
| from arch/powerpc/include/asm/bug.h:109,
| from include/linux/bug.h:5,
| from include/linux/page-flags.h:10,
| from kernel/bounds.c:10:
|include/linux/thread_info.h: In function â=80=98copy_overflowâ=80=99:
|include/linux/thread_info.h:210:2: error: implicit declaration of function â=80=98WARNâ=80=99 [-Werror=3Dimplicit-function-declaration]
| 210 | WARN(1, "Buffer overflow detected (%d < %lu)!\n", size, count);
| | ^~~~
The WARN / BUG include pulls in printk.h and then ptrace.h expects WARN
(from bug.h) which is not yet complete. Even hw_irq.h has WARN_ON()
statements.
On POWERPC64 there are missing atomic64 defines while building 32bit
VDSO:
| VDSO32C arch/powerpc/kernel/vdso32/vgettimeofday.o
|In file included from include/linux/atomic.h:80,
| from include/linux/rwbase_rt.h:6,
| from include/linux/rwlock_types.h:55,
| from include/linux/spinlock_types.h:74,
| from include/linux/ratelimit_types.h:7,
| from include/linux/printk.h:10,
| from include/linux/kernel.h:19,
| from arch/powerpc/include/asm/page.h:11,
| from arch/powerpc/include/asm/vdso/gettimeofday.h:5,
| from include/vdso/datapage.h:137,
| from lib/vdso/gettimeofday.c:5,
| from <command-line>:
|include/linux/atomic-arch-fallback.h: In function âarch_atomic64_incâ=99:
|include/linux/atomic-arch-fallback.h:1447:2: error: implicit declaration of function âarch_atomic64_addâ; did you mean âarch_atomic_addâ? [-Werror=3Dimpl
|icit-function-declaration]
| 1447 | arch_atomic64_add(1, v);
| | ^~~~~~~~~~~~~~~~~
| | arch_atomic_add
The generic fallback is not included, atomics itself are not used. If
kernel.h does not include printk.h then it comes later from the bug.h
include.
Allow asm/spinlock_types.h to be included from
linux/spinlock_types_raw.h.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211129174654.668506-12-bigeasy@linutronix.de
André Almeida sends an update for the newly added futex_waitv
syscall that was initially only added to a few architectures.
Some additional ones have since made it through architecture
maintainer trees, this finishes the remaining ones.
-----BEGIN PGP SIGNATURE-----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=Vy2A
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic syscall table update from Arnd Bergmann:
"André Almeida sends an update for the newly added futex_waitv syscall
that was initially only added to a few architectures.
Some additional ones have since made it through architecture
maintainer trees, this finishes the remaining ones"
* tag 'asm-generic-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
futex: Wireup futex_waitv syscall
Now that all architectures have a working futex implementation in any
configuration, remove the runtime detection code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20211026100432.1730393-2-arnd@kernel.org
The boot-time detection of futex_atomic_cmpxchg_inatomic() has a bug on
some 32-bit arm builds, and Thomas Gleixner suggested that setting
CONFIG_HAVE_FUTEX_CMPXCHG would avoid the problem, as it is always present
anyway.
Looking into which other architectures could do the same showed that almost
all architectures have it, the exceptions being:
- some old 32-bit MIPS uniprocessor cores without ll/sc
- one xtensa variant with no SMP
- 32-bit SPARC when built for SMP
Fix MIPS And Xtensa by rearranging the generic code to let it be used
as a fallback.
For SPARC, the SMP definition just ends up turning off futex anyway, so
this can be done at Kconfig time instead. Note that sparc32 glibc requires
the CASA instruction for its mutexes anyway, which is only available when
running on SPARCv9 or LEON CPUs, but needs to be implemented in the sparc32
kernel for those.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/20211026100432.1730393-1-arnd@kernel.org
Many architectures do not include asm-generic/cacheflush.h, so turn
the includes on their head and add linux/cacheflush.h which includes
asm/cacheflush.h.
Move the flush_dcache_folio() declaration from asm-generic/cacheflush.h
to linux/cacheflush.h and change linux/highmem.h to include
linux/cacheflush.h instead of asm/cacheflush.h so that all necessary
places will see flush_dcache_folio().
More functions should have their default implementations moved in the
future, but those are for follow-on patches. This fixes csky, sparc and
sparc64 which were missed in the commit which added flush_dcache_folio().
Fixes: 08b0b0059b ("mm: Add flush_dcache_folio()")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Pull exit cleanups from Eric Biederman:
"While looking at some issues related to the exit path in the kernel I
found several instances where the code is not using the existing
abstractions properly.
This set of changes introduces force_fatal_sig a way of sending a
signal and not allowing it to be caught, and corrects the misuse of
the existing abstractions that I found.
A lot of the misuse of the existing abstractions are silly things such
as doing something after calling a no return function, rolling BUG by
hand, doing more work than necessary to terminate a kernel thread, or
calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL).
In the review a deficiency in force_fatal_sig and force_sig_seccomp
where ptrace or sigaction could prevent the delivery of the signal was
found. I have added a change that adds SA_IMMUTABLE to change that
makes it impossible to interrupt the delivery of those signals, and
allows backporting to fix force_sig_seccomp
And Arnd found an issue where a function passed to kthread_run had the
wrong prototype, and after my cleanup was failing to build."
* 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
soc: ti: fix wkup_m3_rproc_boot_thread return type
signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed
signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)
exit/r8188eu: Replace the macro thread_exit with a simple return 0
exit/rtl8712: Replace the macro thread_exit with a simple return 0
exit/rtl8723bs: Replace the macro thread_exit with a simple return 0
signal/x86: In emulate_vsyscall force a signal instead of calling do_exit
signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig
signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails
exit/syscall_user_dispatch: Send ordinary signals on failure
signal: Implement force_fatal_sig
exit/kthread: Have kernel threads return instead of calling do_exit
signal/s390: Use force_sigsegv in default_trap_handler
signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.
signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON
signal/sparc: In setup_tsb_params convert open coded BUG into BUG
signal/powerpc: On swapcontext failure force SIGSEGV
signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
signal/sparc32: Remove unreachable do_exit in do_sparc_fault
...
This is a single cleanup from Peter Collingbourne, removing
some dead code.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmGKm+kACgkQmmx57+YA
GNkksg/7BUxJrWFrQmLA3fhzh4wG3KswdrKTGQMf0jRVI1n77vmdfig3hEJmMekH
0SZoIYmPztOSj34+6p4NxuqY/Sk62oYLr8Awo8ZLDhIBWNUJE8UWC07Qb/3DpGbp
JfD7/8mXu10htgM85aGlhaVLnHvvqUBR8PlkJUGNxuY5Gy2L+eCkpwCAYlZpSOqr
vs0BJWFY1LzO1POcjIq4/IM0PvcU2ncLB5XoxDjjIIWnWKyHzWY21ZvoeaNumvou
xqQ/Hj8Sc+ufS0yNlSgIC+bJP0bp1bSw/dALKr8oYxLt7X9LELVY3WXyRH+It4nS
b6HPYmga26NVq/u7RrylBA+2fRCDB8E6z73gHt4SeHrRDEvFjhNzIyV+aXPae/dY
XI/pjiwpG6k6FpSnF69YZJ/Y+GmUA90V/Jq8aLFZhGz8SgpjRl+2foEUSDhRVXCA
jGB1Y388m0e6jPlVJROB7ORzXMd8K5iciyUGqtAI87QCOtPozn10ruh5RdziguKm
kDW5IKy9E4l1ch8WRprVbgV5Ew+QWKS1JIbyjDaX3jN0lUPCqgwkwvRxxtgdFnVA
Lq5BiUdraSWFUr84rLU3gCRU0+VoEdyZYI+bQGGNlQ4ovmLYU1nLmCU/azMvSEgz
ZsoM5YdffShxUtfwMg+W67RpYOjSnV55ZzwN0+d1C2oqz9xECXc=
=8EFP
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanup from Arnd Bergmann:
"This is a single cleanup from Peter Collingbourne, removing some dead
code"
* tag 'asm-generic-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: remove unused function syscall_set_arguments()
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which generate
a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=ATFN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which
generate a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
* tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
kbuild: use more subdir- for visiting subdirectories while cleaning
sh: remove meaningless archclean line
initramfs: Check timestamp to prevent broken cpio archive
kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug
gen_init_cpio: add static const qualifiers
kbuild: Add make tarzst-pkg build option
scripts: update the comments of kallsyms support
sparc: Add missing "FORCE" target when using if_changed
kconfig: refactor conf_touch_dep()
kconfig: refactor conf_write_dep()
kconfig: refactor conf_write_autoconf()
kconfig: add conf_get_autoheader_name()
kconfig: move sym_escape_string_value() to confdata.c
kconfig: refactor listnewconfig code
kconfig: refactor conf_write_symbol()
kconfig: refactor conf_write_heading()
kconfig: remove 'const' from the return type of sym_escape_string_value()
kconfig: rename a variable in the lexer to a clearer name
kconfig: narrow the scope of variables in the lexer
kconfig: Create links to main menu items in search
...
- add support for xtensa cores witout windowed registers option
-----BEGIN PGP SIGNATURE-----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=JWIj
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20211105' of git://github.com/jcmvbkbc/linux-xtensa
Pull xtensa updates from Max Filippov:
- add support for xtensa cores without windowed registers option
* tag 'xtensa-20211105' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: move section symbols to asm/sections.h
xtensa: remove unused variable wmask
xtensa: only build windowed register support code when needed
xtensa: use register window specific opcodes only when present
xtensa: implement call0 ABI support in assembly
xtensa: definitions for call0 ABI
xtensa: don't use a12 in __xtensa_copy_user in call0 ABI
xtensa: don't use a12 in strncpy_user
xtensa: use a14 instead of a15 in inline assembly
xtensa: move _SimulateUserKernelVectorException out of WindowVectors
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space
and avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace
to work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction,
by exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec
offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP
buffer pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x
and Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we
can add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements
to CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=srde
-----END PGP SIGNATURE-----
Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
This pull request contains the following branches:
fixes.2021.10.07a: Miscellaneous fixes.
scftorture.2021.09.16a: smp_call_function torture-test updates, most
notably better checking of module parameters.
tasks.2021.09.15a: Tasks-trace RCU updates that fix a number of rare
but important race-condition bugs.
torture.2021.09.13b: Other torture-test updates, most notably
better checking of module parameters. In addition, rcutorture
may now be run on CONFIG_PREEMPT_RT kernels.
torturescript.2021.09.16a: Torture-test scripting updates, most notably
specifying the new CONFIG_KCSAN_STRICT kconfig option rather
than maintaining an ever-changing list of individual KCSAN
kconfig options.
-----BEGIN PGP SIGNATURE-----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=nmaP
-----END PGP SIGNATURE-----
Merge tag 'rcu.2021.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Miscellaneous fixes
- Torture-test updates for smp_call_function(), most notably improved
checking of module parameters.
- Tasks-trace RCU updates that fix a number of rare but important
race-condition bugs.
- Other torture-test updates, most notably better checking of module
parameters. In addition, rcutorture may once again be run on
CONFIG_PREEMPT_RT kernels.
- Torture-test scripting updates, most notably specifying the new
CONFIG_KCSAN_STRICT kconfig option rather than maintaining an
ever-changing list of individual KCSAN kconfig options.
* tag 'rcu.2021.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (46 commits)
rcu: Fix rcu_dynticks_curr_cpu_in_eqs() vs noinstr
rcu: Always inline rcu_dynticks_task*_{enter,exit}()
torture: Make kvm-remote.sh print size of downloaded tarball
torture: Allot 1G of memory for scftorture runs
tools/rcu: Add an extract-stall script
scftorture: Warn on individual scf_torture_init() error conditions
scftorture: Count reschedule IPIs
scftorture: Account for weight_resched when checking for all zeroes
scftorture: Shut down if nonsensical arguments given
scftorture: Allow zero weight to exclude an smp_call_function*() category
rcu: Avoid unneeded function call in rcu_read_unlock()
rcu-tasks: Update comments to cond_resched_tasks_rcu_qs()
rcu-tasks: Fix IPI failure handling in trc_wait_for_one_reader
rcu-tasks: Fix read-side primitives comment for call_rcu_tasks_trace
rcu-tasks: Clarify read side section info for rcu_tasks_rude GP primitives
rcu-tasks: Correct comparisons for CPU numbers in show_stalled_task_trace
rcu-tasks: Correct firstreport usage in check_all_holdout_tasks_trace
rcu-tasks: Fix s/rcu_add_holdout/trc_add_holdout/ typo in comment
rcu-tasks: Move RTGS_WAIT_CBS to beginning of rcu_tasks_kthread() loop
rcu-tasks: Fix s/instruction/instructions/ typo in comment
...
- Revert the printk format based wchan() symbol resolution as it can leak
the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset and
__sched_setscheduler() introduced a new lock dependency which is now
triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=fgtS
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- Revert the printk format based wchan() symbol resolution as it can
leak the raw value in case that the symbol is not resolvable.
- Make wchan() more robust and work with all kind of unwinders by
enforcing that the task stays blocked while unwinding is in progress.
- Prevent sched_fork() from accessing an invalid sched_task_group
- Improve asymmetric packing logic
- Extend scheduler statistics to RT and DL scheduling classes and add
statistics for bandwith burst to the SCHED_FAIR class.
- Properly account SCHED_IDLE entities
- Prevent a potential deadlock when initial priority is assigned to a
newly created kthread. A recent change to plug a race between cpuset
and __sched_setscheduler() introduced a new lock dependency which is
now triggered. Break the lock dependency chain by moving the priority
assignment to the thread function.
- Fix the idle time reporting in /proc/uptime for NOHZ enabled systems.
- Improve idle balancing in general and especially for NOHZ enabled
systems.
- Provide proper interfaces for live patching so it does not have to
fiddle with scheduler internals.
- Add cluster aware scheduling support.
- A small set of tweaks for RT (irqwork, wait_task_inactive(), various
scheduler options and delaying mmdrop)
- The usual small tweaks and improvements all over the place
* tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
sched/fair: Cleanup newidle_balance
sched/fair: Remove sysctl_sched_migration_cost condition
sched/fair: Wait before decaying max_newidle_lb_cost
sched/fair: Skip update_blocked_averages if we are defering load balance
sched/fair: Account update_blocked_averages in newidle_balance cost
x86: Fix __get_wchan() for !STACKTRACE
sched,x86: Fix L2 cache mask
sched/core: Remove rq_relock()
sched: Improve wake_up_all_idle_cpus() take #2
irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT
irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT
irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.
sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ
sched: Add cluster scheduler level for x86
sched: Add cluster scheduler level in core and related Kconfig for ARM64
topology: Represent clusters of CPUs within a die
sched: Disable -Wunused-but-set-variable
sched: Add wrapper for get_wchan() to keep task blocked
x86: Fix get_wchan() to support the ORC unwinder
proc: Use task_is_running() for wchan in /proc/$pid/stat
...
-----BEGIN PGP SIGNATURE-----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=HiWU
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/drivers-2021-10-29' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- paride driver cleanups (Christoph)
- Remove cryptoloop support (Christoph)
- null_blk poll support (me)
- Now that add_disk() supports proper error handling, add it to various
drivers (Luis)
- Make ataflop actually work again (Michael)
- s390 dasd fixes (Stefan, Heiko)
- nbd fixes (Yu, Ye)
- Remove redundant wq flush in mtip32xx (Christophe)
- NVMe updates
- fix a multipath partition scanning deadlock (Hannes Reinecke)
- generate uevent once a multipath namespace is operational again
(Hannes Reinecke)
- support unique discovery controller NQNs (Hannes Reinecke)
- fix use-after-free when a port is removed (Israel Rukshin)
- clear shadow doorbell memory on resets (Keith Busch)
- use struct_size (Len Baker)
- add error handling support for add_disk (Luis Chamberlain)
- limit the maximal queue size for RDMA controllers (Max Gurtovoy)
- use a few more symbolic names (Max Gurtovoy)
- fix error code in nvme_rdma_setup_ctrl (Max Gurtovoy)
- add support for ->map_queues on FC (Saurav Kashyap)
- support the current discovery subsystem entry (Hannes Reinecke)
- use flex_array_size and struct_size (Len Baker)
- bcache fixes (Christoph, Coly, Chao, Lin, Qing)
- MD updates (Christoph, Guoqing, Xiao)
- Misc fixes (Dan, Ding, Jiapeng, Shin'ichiro, Ye)
* tag 'for-5.16/drivers-2021-10-29' of git://git.kernel.dk/linux-block: (117 commits)
null_blk: Fix handling of submit_queues and poll_queues attributes
block: ataflop: Fix warning comparing pointer to 0
bcache: replace snprintf in show functions with sysfs_emit
bcache: move uapi header bcache.h to bcache code directory
nvmet: use flex_array_size and struct_size
nvmet: register discovery subsystem as 'current'
nvmet: switch check for subsystem type
nvme: add new discovery log page entry definitions
block: ataflop: more blk-mq refactoring fixes
block: remove support for cryptoloop and the xor transfer
mtd: add add_disk() error handling
rnbd: add error handling support for add_disk()
um/drivers/ubd_kern: add error handling support for add_disk()
m68k/emu/nfblock: add error handling support for add_disk()
xen-blkfront: add error handling support for add_disk()
bcache: add error handling support for add_disk()
dm: add add_disk() error handling
block: aoe: fixup coccinelle warnings
nvmet: use struct_size over open coded arithmetic
nvme: drop scan_lock and always kick requeue list when removing namespaces
...
-----BEGIN PGP SIGNATURE-----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=QWC+
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- mq-deadline accounting improvements (Bart)
- blk-wbt timer fix (Andrea)
- Untangle the block layer includes (Christoph)
- Rework the poll support to be bio based, which will enable adding
support for polling for bio based drivers (Christoph)
- Block layer core support for multi-actuator drives (Damien)
- blk-crypto improvements (Eric)
- Batched tag allocation support (me)
- Request completion batching support (me)
- Plugging improvements (me)
- Shared tag set improvements (John)
- Concurrent queue quiesce support (Ming)
- Cache bdev in ->private_data for block devices (Pavel)
- bdev dio improvements (Pavel)
- Block device invalidation and block size improvements (Xie)
- Various cleanups, fixes, and improvements (Christoph, Jackie,
Masahira, Tejun, Yu, Pavel, Zheng, me)
* tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits)
blk-mq-debugfs: Show active requests per queue for shared tags
block: improve readability of blk_mq_end_request_batch()
virtio-blk: Use blk_validate_block_size() to validate block size
loop: Use blk_validate_block_size() to validate block size
nbd: Use blk_validate_block_size() to validate block size
block: Add a helper to validate the block size
block: re-flow blk_mq_rq_ctx_init()
block: prefetch request to be initialized
block: pass in blk_mq_tags to blk_mq_rq_ctx_init()
block: add rq_flags to struct blk_mq_alloc_data
block: add async version of bio_set_polled
block: kill DIO_MULTI_BIO
block: kill unused polling bits in __blkdev_direct_IO()
block: avoid extra iter advance with async iocb
block: Add independent access ranges support
blk-mq: don't issue request directly in case that current is to be blocked
sbitmap: silence data race warning
blk-cgroup: synchronize blkg creation against policy deactivation
block: refactor bio_iov_bvec_set()
block: add single bio async direct IO helper
...
Add memory folios, a new type to represent either order-0 pages or
the head page of a compound page. This should be enough infrastructure
to support filesystems converting from pages to folios.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmF9uI0ACgkQDpNsjXcp
gj7MUAf/R7LCZ+xFiIedw7SAgb/DGK0C9uVjuBEIZgAw21ZUw/GuPI6cuKBMFGGf
rRcdtlvMpwi7yZJcoNXxaqU/xPaaJMjf2XxscIvYJP1mjlZVuwmP9dOx0neNvWOc
T+8lqR6c1TLl82lpqIjGFLwvj2eVowq2d3J5jsaIJFd4odmmYVInrhJXOzC/LQ54
Niloj5ksehf+KUIRLDz7ycppvIHhlVsoAl0eM2dWBAtL0mvT7Nyn/3y+vnMfV2v3
Flb4opwJUgTJleYc16oxTn9svT2yS8q2uuUemRDLW8ABghoAtH3fUUk43RN+5Krd
LYCtbeawtkikPVXZMfWybsx5vn0c3Q==
=7SBe
-----END PGP SIGNATURE-----
Merge tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecache
Pull memory folios from Matthew Wilcox:
"Add memory folios, a new type to represent either order-0 pages or the
head page of a compound page. This should be enough infrastructure to
support filesystems converting from pages to folios.
The point of all this churn is to allow filesystems and the page cache
to manage memory in larger chunks than PAGE_SIZE. The original plan
was to use compound pages like THP does, but I ran into problems with
some functions expecting only a head page while others expect the
precise page containing a particular byte.
The folio type allows a function to declare that it's expecting only a
head page. Almost incidentally, this allows us to remove various calls
to VM_BUG_ON(PageTail(page)) and compound_head().
This converts just parts of the core MM and the page cache. For 5.17,
we intend to convert various filesystems (XFS and AFS are ready; other
filesystems may make it) and also convert more of the MM and page
cache to folios. For 5.18, multi-page folios should be ready.
The multi-page folios offer some improvement to some workloads. The
80% win is real, but appears to be an artificial benchmark (postgres
startup, which isn't a serious workload). Real workloads (eg building
the kernel, running postgres in a steady state, etc) seem to benefit
between 0-10%. I haven't heard of any performance losses as a result
of this series. Nobody has done any serious performance tuning; I
imagine that tweaking the readahead algorithm could provide some more
interesting wins. There are also other places where we could choose to
create large folios and currently do not, such as writes that are
larger than PAGE_SIZE.
I'd like to thank all my reviewers who've offered review/ack tags:
Christoph Hellwig, David Howells, Jan Kara, Jeff Layton, Johannes
Weiner, Kirill A. Shutemov, Michal Hocko, Mike Rapoport, Vlastimil
Babka, William Kucharski, Yu Zhao and Zi Yan.
I'd also like to thank those who gave feedback I incorporated but
haven't offered up review tags for this part of the series: Nick
Piggin, Mel Gorman, Ming Lei, Darrick Wong, Ted Ts'o, John Hubbard,
Hugh Dickins, and probably a few others who I forget"
* tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecache: (90 commits)
mm/writeback: Add folio_write_one
mm/filemap: Add FGP_STABLE
mm/filemap: Add filemap_get_folio
mm/filemap: Convert mapping_get_entry to return a folio
mm/filemap: Add filemap_add_folio()
mm/filemap: Add filemap_alloc_folio
mm/page_alloc: Add folio allocation functions
mm/lru: Add folio_add_lru()
mm/lru: Convert __pagevec_lru_add_fn to take a folio
mm: Add folio_evictable()
mm/workingset: Convert workingset_refault() to take a folio
mm/filemap: Add readahead_folio()
mm/filemap: Add folio_mkwrite_check_truncate()
mm/filemap: Add i_blocks_per_folio()
mm/writeback: Add folio_redirty_for_writepage()
mm/writeback: Add folio_account_redirty()
mm/writeback: Add folio_clear_dirty_for_io()
mm/writeback: Add folio_cancel_dirty()
mm/writeback: Add folio_account_cleaned()
mm/writeback: Add filemap_dirty_folio()
...
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it go through appropriate helpers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Documentation/kbuild/makefiles.rst suggests to use "archclean" for
cleaning arch/$(SRCARCH)/boot/, but it is not a hard requirement.
Since commit d92cc4d516 ("kbuild: require all architectures to have
arch/$(SRCARCH)/Kbuild"), we can use the "subdir- += boot" trick for
all architectures. This can take advantage of the parallel option (-j)
for "make clean".
I also cleaned up the comments in arch/$(SRCARCH)/Makefile. The "archdep"
target no longer exists.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
On nds32, openrisc, s390, sh, and xtensa the function die never
returns. Mark die __noreturn so that no one expects die to return.
Remove the do_exit calls after die as they will never be reached.
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: openrisc@lists.librecores.org
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Fixes: 2.3.16
Fixes: 2.3.99-pre8
Fixes: 3f65ce4d14 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 5")
Fixes: 664eec400b ("nds32: MMU fault handling and page table management")
Fixes: 61e85e3675 ("OpenRISC: Memory management")
Link: https://lkml.kernel.org/r/20211020174406.17889-2-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Introduce asm/sections.h and move section declarations to this header
from setup.c. Assign section symbols char array type uniformly and drop
address operator from section symbol references in code.
Sort headers in setup.c while at it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
After a cleanup the function show_regs doesn't use variable wmask but
still computes it. Drop it.
Fixes: 8d7e8240e6 ("[XTENSA] Clean up elf-gregset.")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
There's no need in window overflow/underflow/alloca exception handlers
or window spill code when neither kernel nor userspace support windowed
registers. Don't build or link it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa core may be configured without register windows support, don't
use register window specific opcodes in that case. Use window register
specific opcodes to initialize hardware or reset core to a known state
regardless of the chosen ABI.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Replace hardcoded register and opcode names with ABI-agnostic macros.
Add register save/restore code where necessary. Conditionalize windowed
only or call0 only code. Add stack initialization matching _switch_to
epilogue to copy_thread.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add assembly macros for calls, call arguments, preserved registers,
function entry and return for windowed and call0 ABIs.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
a12 is callee-saved register in xtensa call0 ABI, so a function must not
change it. The main unaligned copy loop of __xtensa_copy_user uses all
low-numbered registers, so a register must be spilled to avoid using a12
as a loop counter.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
a12 is callee-saved register in xtensa call0 ABI, so a function must not
change it. a10 is not used in this function at all, use it instead of
a12 to avoid saving/restoring it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
a15 is a frame pointer in the call0 xtensa ABI, don't use it explicitly
in the inline assembly. Use a14 instead, as it has the same properties
as a15 w.r.t. window overflow.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In configurations without window registers support the section
.WindowVectors.text may never be linked.
_SimulateUserKernelVectorException is a common handler for high priority
interrupts, it does not belong in that section anyway. Move it out of
that section and mark it as __XTENSA_HANDLER so it gets bundled with
other vector helpers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20210927220110.1066271-7-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the blk_poll interface that requires the caller to keep a queue
and cookie from the submissions with polling based on the bio.
Polling for the bio itself leads to a few advantages:
- the cookie construction can made entirely private in blk-mq.c
- the caller does not need to remember the request_queue and cookie
separately and thus sidesteps their lifetime issues
- keeping the device and the cookie inside the bio allows to trivially
support polling BIOs remapping by stacking drivers
- a lot of code to propagate the cookie back up the submission path can
be removed entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a default implementation which calls flush_dcache_page() on
each page in the folio. If architectures can do better, they should
implement their own version of it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Having a stable wchan means the process must be blocked and for it to
stay that way while performing stack unwinding.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm]
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Link: https://lkml.kernel.org/r/20211008111626.332092234@infradead.org
tools/testing/selftests/net/ioam6.sh
7b1700e009 ("selftests: net: modify IOAM tests for undef bits")
bf77b1400a ("selftests: net: Test for the IOAM encapsulation with IPv6")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rebooting xtensa images loaded with the '-kernel' option in qemu does
not work. When executing a reboot command, the qemu session either hangs
or experiences an endless sequence of error messages.
Kernel panic - not syncing: Unrecoverable error in exception handler
Reset code jumps to the CPU restart address, but Linux can not recover
from there because code and data in the kernel init sections have been
discarded and overwritten at this point.
XTFPGA platforms have a means to reset the CPU by writing 0xdead into a
specific FPGA IO address. When used in QEMU the kernel image loaded with
the '-kernel' option gets restored to its original state allowing the
machine to boot successfully.
Use that mechanism to attempt a platform reset. If it does not work,
fall back to the existing mechanism.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use platform data to initialize xtfpga device drivers when CONFIG_USE_OF
is not selected. This fixes xtfpga networking when CONFIG_USE_OF is not
selected but CONFIG_OF is.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Convert misc arch drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set():
@@
expression dev, np;
@@
- memcpy(dev->dev_addr, np, ETH_ALEN)
+ eth_hw_addr_set(dev, np)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
During boot time kernel configured with OF=y but USE_OF=n displays the
following warnings and hangs shortly after starting userspace:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:695 irq_create_mapping_affinity+0x29/0xc0
irq_create_mapping_affinity(, 6) called with NULL domain
CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc3-00001-gd67ed2510d28 #30
Call Trace:
__warn+0x69/0xc4
warn_slowpath_fmt+0x6c/0x94
irq_create_mapping_affinity+0x29/0xc0
local_timer_setup+0x40/0x88
time_init+0xb1/0xe8
start_kernel+0x31d/0x3f4
_startup+0x13b/0x13b
---[ end trace 1e6630e1c5eda35b ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/xtensa/kernel/time.c:141 local_timer_setup+0x58/0x88
error: can't map timer irq
CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.15.0-rc3-00001-gd67ed2510d28 #30
Call Trace:
__warn+0x69/0xc4
warn_slowpath_fmt+0x6c/0x94
local_timer_setup+0x58/0x88
time_init+0xb1/0xe8
start_kernel+0x31d/0x3f4
_startup+0x13b/0x13b
---[ end trace 1e6630e1c5eda35c ]---
Failed to request irq 0 (timer)
Fix that by calling irqchip_init only when CONFIG_USE_OF is selected and
calling legacy interrupt controller init otherwise.
Fixes: da844a8177 ("xtensa: add device trees support")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
CONFIG_OF can be set by a randconfig or by a user -- without setting the
early flattree option (OF_EARLY_FLATTREE). This causes build errors.
However, if randconfig or a user sets USE_OF in the Xtensa config,
the right kconfig symbols are set to fix the build.
Fixes these build errors:
../arch/xtensa/kernel/setup.c:67:19: error: ‘__dtb_start’ undeclared here (not in a function); did you mean ‘dtb_start’?
67 | void *dtb_start = __dtb_start;
| ^~~~~~~~~~~
../arch/xtensa/kernel/setup.c: In function 'xtensa_dt_io_area':
../arch/xtensa/kernel/setup.c:201:14: error: implicit declaration of function 'of_flat_dt_is_compatible'; did you mean 'of_machine_is_compatible'? [-Werror=implicit-function-declaration]
201 | if (!of_flat_dt_is_compatible(node, "simple-bus"))
../arch/xtensa/kernel/setup.c:204:18: error: implicit declaration of function 'of_get_flat_dt_prop' [-Werror=implicit-function-declaration]
204 | ranges = of_get_flat_dt_prop(node, "ranges", &len);
../arch/xtensa/kernel/setup.c:204:16: error: assignment to 'const __be32 *' {aka 'const unsigned int *'} from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
204 | ranges = of_get_flat_dt_prop(node, "ranges", &len);
| ^
../arch/xtensa/kernel/setup.c: In function 'early_init_devtree':
../arch/xtensa/kernel/setup.c:228:9: error: implicit declaration of function 'early_init_dt_scan'; did you mean 'early_init_devtree'? [-Werror=implicit-function-declaration]
228 | early_init_dt_scan(params);
../arch/xtensa/kernel/setup.c:229:9: error: implicit declaration of function 'of_scan_flat_dt' [-Werror=implicit-function-declaration]
229 | of_scan_flat_dt(xtensa_dt_io_area, NULL);
xtensa-elf-ld: arch/xtensa/mm/mmu.o:(.text+0x0): undefined reference to `xtensa_kio_paddr'
Fixes: da844a8177 ("xtensa: add device trees support")
Fixes: 6cb971114f ("xtensa: remap io area defined in device tree")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
