The ACPI spec defines the SharedAndWake and ExclusiveAndWake share type
keywords. This is an indication that the GPIO IRQ can also be used as a
wake source. This change exposes the wake_capable bit so drivers can
correctly enable wake functionality instead of making an assumption.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Before the split of gpio and pinctrl sections in their own driver,
rockchip_set_mux was called in pinmux_ops.gpio_set_direction for
configuring a pin in its GPIO function.
This is essential for cases where pinctrl is "bypassed" by gpio
consumers otherwise the GPIO function is not configured for the pin and
it does not work. Such was the case for the sysfs/libgpiod userspace
GPIO handling.
Let's call pinctrl_gpio_direction_input/output when setting the
direction of a GPIO so that the pinctrl core requests from the rockchip
pinctrl driver to put the pin in its GPIO function.
Fixes: 9ce9a02039 ("pinctrl/rockchip: drop the gpio related codes")
Fixes: 936ee2675e ("gpio/rockchip: add driver for rockchip gpio")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220930132033.4003377-3-foss+kernel@0leil.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add fdinfo output for file descriptors created for user-space line
requests in GPIO uAPI v2. The fdinfo file now contains the name of the
GPIO chip that is the "parent" of the request as well as offsets of
the lines requested. This allows user-space to parse the /proc/$PID/fdinfo
entries and deduce the PID of the process that requested a specific line.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
pwm support incompatible with Armada 80x0/70x0 API is not only in
Armada 370, but also in Armada XP, 38x and 39x. So basically every non-A8K
platform. Fix check for pwm support appropriately.
Fixes: 85b7d8abfe ("gpio: mvebu: add pwm support for Armada 8K/7K")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
When running gpio test on nxp-ls1028 platform with below command
gpiomon --num-events=3 --rising-edge gpiochip1 25
There will be a warning trace as below:
Call trace:
free_irq+0x204/0x360
lineevent_free+0x64/0x70
gpio_ioctl+0x598/0x6a0
__arm64_sys_ioctl+0xb4/0x100
invoke_syscall+0x5c/0x130
......
el0t_64_sync+0x1a0/0x1a4
The reason of this issue is that calling request_threaded_irq()
function failed, and then lineevent_free() is invoked to release
the resource. Since the lineevent_state::irq was already set, so
the subsequent invocation of free_irq() would trigger the above
warning call trace. To fix this issue, set the lineevent_state::irq
after the IRQ register successfully.
Fixes: 4682427241 ("gpiolib: cdev: refactor lineevent cleanup into lineevent_free")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The commit 924610607f ("gpio: tpmx86: Move PM device over to
irq domain") adds a dereference of girq that may be uninitialized.
Fix this by moving irq_domain_set_pm_device into if true branch
as suggested by Marc Zyngier.
Fixes: 924610607f ("gpio: tpmx86: Move PM device over to irq domain")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This turns the FTGPIO010 irqchip immutable.
Tested on the D-Link DIR-685.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
If creation of software node fails, the locally allocated string
array is left unfreed. Free it on error path.
Fixes: 6fda593f30 ("gpio: mockup: Convert to use software nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
We now remove the device's debugfs entries when unbinding the driver.
This now causes a NULL-pointer dereference on module exit because the
platform devices are unregistered *after* the global debugfs directory
has been recursively removed. Fix it by unregistering the devices first.
Fixes: 303e6da994 ("gpio: mockup: remove gpio debugfs when remove device")
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
* Add a quirk for Asus UM325UAZ to make GPIO interrupts working
The following is an automated git shortlog grouped by driver:
gpiolib:
- acpi: Add a quirk for Asus UM325UAZ
- acpi: Add support to ignore programming an interrupt
-----BEGIN PGP SIGNATURE-----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=4yCI
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.1-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.1-1
* Add a quirk for Asus UM325UAZ to make GPIO interrupts working
There is no cyclic dependency between gpio_twl4030_probe() and
gpio_twl4030_remove(), so by moving the latter before the former the
forward declaration can be dropped.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Commit a2b5e207ca ("gpiolib: rework quirk handling in of_find_gpio()")
introduced an array of quirk functions which get iterated over. But a
sentinal value is missing. Add it.
Fixes: a2b5e207ca ("gpiolib: rework quirk handling in of_find_gpio()")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
On PREEMPT_RT enabled kernels the demultiplex interrupt handler is force
threaded and runs with interrupts enabled. The invocation of
generic_handle_irq() with interrupts enabled triggers a lockdep warning due
to a non-irq safe lock acquisition.
Instead of disabling interrupts on the driver level, use
generic_handle_domain_irq_safe().
[ tglx: Split out from combo patch ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/YnkfWFzvusFFktSt@linutronix.de
- fix the level-low interrupt type support in gpio-mpc8xxx
- convert another two drivers to using immputable irq chips
- MAINTAINERS update
-----BEGIN PGP SIGNATURE-----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=/cR5
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix the level-low interrupt type support in gpio-mpc8xxx
- convert another two drivers to using immutable irq chips
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mt7621: Make the irqchip immutable
gpio: ixp4xx: Make irqchip immutable
MAINTAINERS: Update HiSilicon GPIO Driver maintainer
gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx
- Fix IRQ wakeup and pins for UFS and SDC2 issues on the
Qualcomm SC8180x
- Fix the Rockchip driver to support interrupt on both rising
and falling edges.
- Name the Allwinner A100 R_PIO properly
- Fix several issues with the Ocelot interrupts.
-----BEGIN PGP SIGNATURE-----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=i8Nw
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Nothing special, just driver fixes:
- Fix IRQ wakeup and pins for UFS and SDC2 issues on the Qualcomm
SC8180x
- Fix the Rockchip driver to support interrupt on both rising and
falling edges.
- Name the Allwinner A100 R_PIO properly
- Fix several issues with the Ocelot interrupts"
* tag 'pinctrl-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: ocelot: Fix interrupt controller
pinctrl: sunxi: Fix name for A100 R_PIO
pinctrl: rockchip: Enhance support for IRQ_TYPE_EDGE_BOTH
pinctrl: qcom: sc8180x: Fix wrong pin numbers
pinctrl: qcom: sc8180x: Fix gpio_wakeirq_map
There are several places where we need to convert from OF flags to
"normal" GPIO_* flags, so let's introduce a helper and use it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Instead of having a string of "if" statements let's put all quirks into
an array and iterate over them.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
There is no need for of_find_spi_cs_gpio() to be different from other
quirks: the only variant of property actually used in DTS is "gpios"
(plural) so we can use of_get_named_gpiod_flags() instead of recursing
into of_find_gpio() again.
This will allow us consolidate quirk handling down the road.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
We should not ignore index passed into of_find_gpio() when handling
quirks. While in practice this change will not have any effect, it
will allow consolidate quirk handling.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The ws16c48 module calls devm_request_irq() for each device. If the
number of irq passed to the module does not match the number of base, a
default value of 0 is passed to devm_request_irq(). IRQ 0 is probably
not what the user wants, so utilize the module_isa_driver_with_irq macro
to ensure the number of irq matches the number of base.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The 104-idio-16 module calls devm_request_irq() for each device. If the
number of irq passed to the module does not match the number of base, a
default value of 0 is passed to devm_request_irq(). IRQ 0 is probably
not what the user wants, so utilize the module_isa_driver_with_irq macro
to ensure the number of irq matches the number of base.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The 104-idi-48 module calls devm_request_irq() for each device. If the
number of irq passed to the module does not match the number of base, a
default value of 0 is passed to devm_request_irq(). IRQ 0 is probably
not what the user wants, so utilize the module_isa_driver_with_irq macro
to ensure the number of irq matches the number of base.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The 104-dio-48e module calls devm_request_irq() for each device. If the
number of irq passed to the module does not match the number of base, a
default value of 0 is passed to devm_request_irq(). IRQ 0 is probably
not what the user wants, so utilize the module_isa_driver_with_irq macro
to ensure the number of irq matches the number of base.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Add support for the NXP PCAL6534. This device is broadly a 34-bit version
of the PCAL6524. However, whilst the registers are broadly what you'd
expect for a 34-bit version of the PCAL6524, the spacing of the registers
has been compacted. This has the unfortunate effect of breaking the bit
shift based mechanism that is employed to work out register locations used
by the other chips supported by this driver. To accommodate ths, callback
functions have been added to allow alterate implementations of
pca953x_recalc_addr() and pca953x_check_register() for the PCAL6534.
Datasheet: https://www.nxp.com/docs/en/data-sheet/PCAL6534.pdf
Datasheet: https://www.diodes.com/assets/Datasheets/PI4IOE5V6534Q.pdf
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
A later patch in the series adds support for a further chip type that
shares some similarity with the PCA953X_TYPE. In order to keep the logic
simple, swap over the if and else portions where checks are made against
PCA953X_TYPE and instead check for PCA957X_TYPE.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
A previous fix, commit dc87f6dd05 ("gpio: pca953x: Fix
pca953x_gpio_set_config"), identified that pinconf_to_config_param() needed
to be used to isolate the config_param from the pinconf in
pca953x_gpio_set_config(). This fix however did not consider that this
would also be needed in pca953x_gpio_set_pull_up_down() to which it passes
this config.
Perform a similar call in pca953x_gpio_set_pull_up_down() to isolate the
configuration parameter there as well, rather than passing it from
pca953x_gpio_set_config() as the configuration argument may also be needed
in pca953x_gpio_set_pull_up_down() at a later date.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Mt7621 SoC GPIO driver is a platform driver so we can directly use
'platform_get_irq' instead of 'irq_of_parse_and_map'.
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Commit 6c846d026d ("gpio: Don't fiddle with irqchips marked as
immutable") added a warning to indicate if the gpiolib is altering the
internals of irqchips. Following this change the following warnings
are now observed for the mt7621 driver:
gpio gpiochip0: (1e000600.gpio-bank0): not an immutable chip, please consider fixing it!
gpio gpiochip1: (1e000600.gpio-bank1): not an immutable chip, please consider fixing it!
gpio gpiochip2: (1e000600.gpio-bank2): not an immutable chip, please consider fixing it!
Fix this by making the irqchip in the mt7621 driver immutable.
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This turns the IXP4xx GPIO irqchip into an immutable
irqchip, a bit different from the standard template due
to being hierarchical.
Tested on the IXP4xx which uses drivers/ata/pata_ixp4xx_cf.c
for a rootfs on compact flash with IRQs from this GPIO
block to the CF ATA controller.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Commit e39d5ef678 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support
mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in
mpc512x via falling edge type. Do same for mpc85xx which support was added
in commit 345e5c8a1c ("powerpc: Add interrupt support to mpc8xxx_gpio").
Fixes probing of lm90 hwmon driver on mpc85xx based board which use level
interrupt. Without it kernel prints error and refuse lm90 to work:
[ 15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8)
[ 15.267168] lm90 0-004c: cannot request IRQ 49
[ 15.272708] lm90: probe of 0-004c failed with error -22
Fixes: 345e5c8a1c ("powerpc: Add interrupt support to mpc8xxx_gpio")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Asus UM325UAZ has GPIO 18 programmed as both an interrupt and a wake
source, but confirmed with internal team on this design this pin is
floating and shouldn't have been programmed. This causes lots of
spurious IRQs on the system and horrendous battery life.
Add a quirk to ignore attempts to program this pin on this system.
Reported-by: Pavel Krc <reg.krn@pkrc.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216208
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
gpiolib-acpi already had support for ignoring a pin for wakeup, but
if an OEM configures a floating pin as an interrupt source then
stopping it from being a wakeup won't do much good to stop the
interrupt storm.
Add support for a module parameter and quirk infrastructure to
ignore interrupts as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When EXAR xr17v35x chips are cascaded in order to access the MPIO registers
(part of the Device Configuration Registers) of the secondary chips, an offset
needs to be applied based on the number of primary chip's UART channels.
Signed-off-by: Qingtao Cao <qingtao.cao@digi.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
There are no external users of fwnode_get_named_gpiod() anymore, so
let's stop exporting it and mark it as static.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
v6.0-rc1 + "[PATCH v6 0/7] add support for another simatic board" series
for merging into the gpio, leds and pdx86 subsystems.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmMQxTsUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zO/Qf/XqsHSH5WHqrto/MYJ2CEiTz8nXQD
BD6nQh9AxKDo1HpW9H3SiXZf/+iZrpmcJ9uq6buE9Ls1n6xrmCULs1LE6RIbyVXe
KKd1NlbWrBd9tVakmy/nQgwUOmTXORGJUbdHNIPcYMM6Me+8sj/oFEA5gIW70cBS
Itd7IKNT7hk63DFdNgw0b00vobnkSd8jIx+U8aHip8fq474N2BHR0amb36TxztSu
uvA5XVP1hcTBHSKjy5KArLiiKG2ttYkmKf9urULeQhT+rrZ25pjGpvETksAVfKBh
QPS957aEPhQrzzmXCO65+Qm4HfltjOJjbOUa42TICN4MaTJHiUtcGR/PVg==
=CvyP
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-simatec-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 into gpio/for-next
Tag (immutable branch) for:
v6.0-rc1 + "[PATCH v6 0/7] add support for another simatic board" series
for merging into the gpio, leds and pdx86 subsystems.
So that drivers building on top can find those pins with GPIO_LOOKUP
helpers.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220825104422.14156-5-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add GPIO support for Nuvoton NCT6116 chip. Nuvoton SuperIO chips are
very similar to the ones from Fintek. In other subsystems they also
share drivers and are called a family of drivers.
For the GPIO subsystem the only difference is that the direction bit is
reversed and that there is only one data bit per pin. On the SuperIO
level the logical device is another one.
On a chip level we do not have a manufacturer ID to check and also no
revision.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220825104422.14156-4-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Subsequent patches will touch that file, apply some nice to have style
changes before actually adding functional changes.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220825104422.14156-3-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Subsequent patches will touch that file, apply some nice to have style
changes before actually adding functional changes.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220825104422.14156-2-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
By using 16-bit I/O on the GPIO peripheral, which is apparently not safe
on MIPS, the IMR can end up containing garbage. This then results in
interrupt triggers for lines that don't have an interrupt handler
associated. The irq_desc lookup fails, and the ISR will not be cleared,
keeping the CPU busy until reboot, or until another IMR operation
restores the correct value. This situation appears to happen very
rarely, for < 0.5% of IMR writes.
Instead of using 8-bit or 16-bit I/O operations on the 32-bit memory
mapped peripheral registers, switch to using 32-bit I/O only, operating
on the entire bank for all single bit line settings. For 2-bit line
settings, with 16-bit port values, stick to manual (un)packing.
This issue has been seen on RTL8382M (HPE 1920-16G), RTL8391M (Netgear
GS728TP v2), and RTL8393M (D-Link DGS-1210-52 F3, Zyxel GS1900-48).
Reported-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> # DGS-1210-52
Reported-by: Birger Koblitz <mail@birger-koblitz.de> # GS728TP
Reported-by: Jan Hoffmann <jan@3e8.eu> # 1920-16G
Fixes: 0d82fb1127 ("gpio: Add Realtek Otto GPIO support")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Cc: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The SCU firmware on i.MX8 platforms provides a set of APIs to
control the GPIO PINs on the SCU domain. This patch implements the
standard GPIO driver interface to access those PINs on the
SCU domain over the SCU APIs.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The regcache sync will set the cache_bypass = true, at that
time, when there is regmap write operation, it will bypass
the regmap cache, then the regcache sync will write back the
value from cache to register, which is not as our expectation.
Though regmap already use its internal lock to avoid such issue,
but this driver force disable the regmap internal lock in its
regmap config: disable_locking = true
To avoid this issue, use the driver's own lock to do the protect
in system PM.
Fixes: b765743005 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The UCB1400 implements a GPIO driver so it needs to include the
<linux/gpio/driver.h> header, not the legacy <linux/gpio.h> header.
Compile tested on pxa_defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
With commit 9d2b2e83ef ("Input: adp5588-keys - support gpi key events as
'gpio keys'") the irchip functionality is directly supported in the input
driver as the main goal of these pins is to be used as gpio keys. Hence,
this driver can be removed.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829131553.690063-3-nuno.sa@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
GPIO mockup debugfs is created in gpio_mockup_probe() but
forgot to remove when remove device. This patch add a devm
managed callback for removing them.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Switching between falling/rising edges for IRQ_TYPE_EDGE_BOTH on pins that
require debounce can cause the device to lose events due to a desync
between pin state and irq type.
This problem is resolved by switching between IRQ_TYPE_LEVEL_LOW and
IRQ_TYPE_LEVEL_HIGH instead.
Fixes: 936ee2675e ("gpio/rockchip: add driver for rockchip gpio")
Signed-off-by: João H. Spies <jhlspies@gmail.com>
Link: https://lore.kernel.org/r/20220808025121.110223-1-jhlspies@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The clock is never released after probe(). Use devres to not leak
resources.
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
All platforms that provide a teardown callback return 0. New users are
supposed to not make use of platform support, so there is no
functionality lost.
This patch is a preparation for making i2c remove callbacks return void.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- remove gpio-vr41xx driver as the only platform using it got dropped too
- add support for suspend/resume to gpio-davinci
- improvements to the GPIO character device code
- add support for disabling bias for in-kernel users (up until now
only user-space could set it)
- drop unused devm_gpio_free()
- fix a refcount issue in gpiolib OF
- use device match helpers where applicable
- add support for a new model to gpio-rockchip
- non-functional improvements in gpio-adp5588
- improve and simplify teardown in gpio-twl4030 and gpio-ucb1400
- modernize the gpio-74xx-mmio and gpio-adnp drivers
- coding style improvements in gpio-xilinx, gpio-104-idi-48
- support new model (pca9571) in gpio-pca9570
- convert the DT bindings to YAML for gpio-mvebu and update the document
- don't return error codes from remove() in gpio-brcmstb
- add a library for the intel 8255 PPI interface and use it in drivers
- reduce using magic numbers and improve code readability in several drivers
- convert DT bindings to YAML for gpio-tpic2810
- add new models to DT bindings for gpio-frl-imx
- Kconfig improvements
- other minor tweaks and improvements
-----BEGIN PGP SIGNATURE-----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=rGNU
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Here are the updates for this merge window from the GPIO subsystem.
We have more lines removed than added thanks to dropping of a driver
for a platform that's no longer supported. Otherwise the changes are
pretty straightforward: support for some new models, various
improvements to existing drivers, some tweaks to the core library code
and DT bindings updates.
Summary:
- remove gpio-vr41xx driver as the only platform using it got dropped
too
- add support for suspend/resume to gpio-davinci
- improvements to the GPIO character device code
- add support for disabling bias for in-kernel users (up until now
only user-space could set it)
- drop unused devm_gpio_free()
- fix a refcount issue in gpiolib OF
- use device match helpers where applicable
- add support for a new model to gpio-rockchip
- non-functional improvements in gpio-adp5588
- improve and simplify teardown in gpio-twl4030 and gpio-ucb1400
- modernize the gpio-74xx-mmio and gpio-adnp drivers
- coding style improvements in gpio-xilinx, gpio-104-idi-48
- support new model (pca9571) in gpio-pca9570
- convert the DT bindings to YAML for gpio-mvebu and update the
document
- don't return error codes from remove() in gpio-brcmstb
- add a library for the intel 8255 PPI interface and use it in
drivers
- reduce using magic numbers and improve code readability in several
drivers
- convert DT bindings to YAML for gpio-tpic2810
- add new models to DT bindings for gpio-frl-imx
- Kconfig improvements
- other minor tweaks and improvements"
* tag 'gpio-updates-for-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (52 commits)
dt-bindings: gpio: fsl-imx-gpio: Add i.MXRT compatibles
gpio: 74xx-mmio: Use bits instead of plain numbers for flags
gpio: xilinx: add missing blank line after declarations
MAINTAINERS: Update Intel 8255 GPIO driver file list
gpio: gpio-mm: Implement and utilize register structures
gpio: 104-idi-48: Implement and utilize register structures
gpio: 104-dio-48e: Implement and utilize register structures
gpio: i8255: Introduce the Intel 8255 interface library module
gpio: 104-idio-16: Implement and utilize register structures
gpio: ws16c48: Implement and utilize register structures
gpio: remove VR41XX related gpio driver
dt-bindings: gpio: add pull-disable flag
gpiolib: acpi: support bias pull disable
gpiolib: of: support bias pull disable
gpiolib: add support for bias pull disable
gpio: 74xx-mmio: use bits.h macros for all masks
gpio: 74xx-mmio: Check MMIO_74XX_DIR_IN flag in mmio_74xx_dir_in()
gpio: 74xx-mmio: Make use of device properties
gpiolib: cdev: compile out HTE unless CONFIG_HTE selected
gpiolib: cdev: consolidate edge detector configuration flags
...
Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text. Also included in here are a few other minor updates,
2 USB files, and one Documentation file update to get the SPDX lines
correct.
All of these have been in the linux-next tree for a very long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYupz3g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynPUgCgslaf2ssCgW5IeuXbhla+ZBRAzisAnjVgOvLN
4AKdqbiBNlFbCroQwmeQ
=v1sg
-----END PGP SIGNATURE-----
Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
core:
- Fix a few inconsistencies between UP and SMP vs. interrupt affinities
- Small updates and cleanups all over the place
drivers:
- New driver for the LoongArch interrupt controller
- New driver for the Renesas RZ/G2L interrupt controller
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual
-----BEGIN PGP SIGNATURE-----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=OnhF
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for interrupt core and drivers:
Core:
- Fix a few inconsistencies between UP and SMP vs interrupt
affinities
- Small updates and cleanups all over the place
New drivers:
- LoongArch interrupt controller
- Renesas RZ/G2L interrupt controller
Updates:
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual"
* tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
irqchip/mmp: Declare init functions in common header file
irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
genirq: Use for_each_action_of_desc in actions_show()
irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
irqchip: Add LoongArch CPU interrupt controller support
irqchip: Add Loongson Extended I/O interrupt controller support
irqchip/loongson-liointc: Add ACPI init support
irqchip/loongson-pch-msi: Add ACPI init support
irqchip/loongson-pch-pic: Add ACPI init support
irqchip: Add Loongson PCH LPC controller support
LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
LoongArch: Use ACPI_GENERIC_GSI for gsi handling
genirq/generic_chip: Export irq_unmap_generic_chip
ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
APCI: irq: Add support for multiple GSI domains
LoongArch: Provisionally add ACPICA data structures
irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
irqdomain: Report irq number for NOMAP domains
irqchip/gic-v3: Fix comment typo
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC
...
The initial code was misleading to use bitwise AND against plain number,
and the commit d3054ba1db ("gpio: 74xx-mmio: Check MMIO_74XX_DIR_IN flag
in mmio_74xx_dir_in()") missed that. Switch definitions to be defined bits
for the correct comparison.
Fixes: d3054ba1db ("gpio: 74xx-mmio: Check MMIO_74XX_DIR_IN flag in mmio_74xx_dir_in()")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
- fix several regmap usage issues in gpio-pca953x
- fix out-of-tree build for GPIO selftests
- fix integer overflow in gpio-xilinx
-----BEGIN PGP SIGNATURE-----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=ZSY3
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix several regmap usage issues in gpio-pca953x
- fix out-of-tree build for GPIO selftests
- fix integer overflow in gpio-xilinx
* tag 'gpio-fixes-for-v5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: gpio-xilinx: Fix integer overflow
selftests: gpio: fix include path to kernel headers for out of tree builds
gpio: pca953x: use the correct register address when regcache sync during init
gpio: pca953x: use the correct range when do regmap sync
gpio: pca953x: only use single read/write for No AI mode
Current implementation is not able to configure more than 32 pins
due to incorrect data type. So type casting with unsigned long
to avoid it.
Fixes: 02b3f84d90 ("xilinx: Switch to use bitmap APIs")
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures. The GPIO-MM device features an
Intel 8255 compatible GPIO interface, so the i8255 GPIO module is
selected and utilized as well.
Tested-by: Fred Eckert <Frede@cmslaser.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures. The 104-IDI-48 device features
an Intel 8255 compatible GPIO interface, so the i8255 GPIO module is
selected and utilized as well.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: John Hentges <jhentges@accesio.com>
Cc: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures. The 104-DIO-48E device
features an Intel 8255 compatible GPIO interface, so the i8255 GPIO
module is selected and utilized as well.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: John Hentges <jhentges@accesio.com>
Cc: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Exposes consumer library functions providing support for interfaces
compatible with the venerable Intel 8255 Programmable Peripheral
Interface (PPI).
The Intel 8255 PPI first appeared in the early 1970s, initially for the
Intel 8080 and later appearing in the original IBM-PC. The popularity of
the original Intel 8255 chip led to many subsequent variants and clones
of the interface in various chips and integrated circuits. Although
still popular, interfaces compatible with the Intel 8255 PPI are
nowdays typically found embedded in larger VLSI processing chips and
FPGA components rather than as discrete ICs.
A CONFIG_GPIO_I8255 Kconfig option is introduced by this patch. Modules
wanting access to these i8255 library functions should select this
Kconfig option, and import the I8255 symbol namespace.
Tested-by: Fred Eckert <Frede@cmslaser.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: John Hentges <jhentges@accesio.com>
Cc: Jay Dolan <jay.dolan@accesio.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures.
Tested-by: Fred Eckert <Frede@cmslaser.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: John Hentges <jhentges@accesio.com>
Cc: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Paul Demetrotion <pdemetrotion@winsystems.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Commit d3164e2f3b ("MIPS: Remove VR41xx support") removed support
for MIPS VR41xx platform, so remove exclusive drivers for this
platform, too.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
For regcache_sync_region, we need to use pca953x_recalc_addr() to get
the real register address.
Fixes: ec82d1eba3 ("gpio: pca953x: Zap ad-hoc reg_output cache")
Fixes: 0f25fda840 ("gpio: pca953x: Zap ad-hoc reg_direction cache")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
regmap will sync a range of registers, here use the correct range
to make sure the sync do not touch other unexpected registers.
Find on pca9557pw on imx8qxp/dxl evk board, this device support
8 pin, so only need one register(8 bits) to cover all the 8 pins's
property setting. But when sync the output, we find it actually
update two registers, output register and the following register.
Fixes: b765743005 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Fixes: ec82d1eba3 ("gpio: pca953x: Zap ad-hoc reg_output cache")
Fixes: 0f25fda840 ("gpio: pca953x: Zap ad-hoc reg_direction cache")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
For the device use NO AI mode(not support auto address increment),
only use the single read/write when config the regmap.
We meet issue on PCA9557PW on i.MX8QXP/DXL evk board, this device
do not support AI mode, but when do the regmap sync, regmap will
sync 3 byte data to register 1, logically this means write first
data to register 1, write second data to register 2, write third data
to register 3. But this device do not support AI mode, finally, these
three data write only into register 1 one by one. the reault is the
value of register 1 alway equal to the latest data, here is the third
data, no operation happened on register 2 and register 3. This is
not what we expect.
Fixes: 4942723276 ("gpio: pca953x: Perform basic regmap conversion")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
On top of looking at PULL_UP and PULL_DOWN flags, also look at
PULL_DISABLE and set the appropriate GPIO flag. The GPIO core will then
pass down this to controllers that support it.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
On top of looking at PULL_UP and PULL_DOWN flags, also look at
PULL_DISABLE and set the appropriate GPIO flag. The GPIO core will then
pass down this to controllers that support it.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This change prepares the gpio core to look at firmware flags and set
'FLAG_BIAS_DISABLE' if necessary. It works in similar way to
'GPIO_PULL_DOWN' and 'GPIO_PULL_UP'.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Make use of the GENMASK() (far less error-prone, far more concise).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
It's logically better to check the IN in ->direction_input() and
_OUT in ->direction_output().
While at it, replace ternary with plain if-conditional for the sake
of consistency with mmio_74xx_dir_out().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Add mod_devicetable.h include.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The majority of builds do not include HTE, so compile out hte
functionality unless CONFIG_HTE is selected.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Combine the polarity_change flag, struct line eflags, and hte enable
flag into a single flag variable.
The combination of these flags describes the configuration state
of the edge detector, so formalize and clarify that by combining
them into a single variable, edflags, in struct line.
The edflags is a subset of the GPIO_V2_LINE_FLAGsb relevant to
the edge detector, and is also a superset of the eflags it replaces.
The eflags name is still used to describe the subset of edflags
corresponding to the rising/falling edge flags where edflags is
masked down to that subset.
This consolidation reduces the number of variables being passed,
simplifies state comparisons, and provides a more extensible
foundation should additional edge sources be integrated in the
future.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reorganise line event identification code to reduce code duplication,
and replace if-else initializers with a helper function to improve
readability.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Improve readability by using the GPIO_V2_LINE_FLAG_EDGE_BOTH instead
of combining the rising and falling edge flags.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Tested-by: Dipen Patel <dipenp@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The edge detector is only ever started after the line desc has been
determined, so move edge_detector_stop() inside the line desc check,
and merge the two checked regions into one.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The SAMA5D2 PIOBU is only present on some AT91/Microchip SoCs. Hence
add a dependency on ARCH_AT91, to prevent asking the user about this
driver when configuring a kernel without AT91/Microchip SoC support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
We should use of_node_get() when a new reference of device_node
is created. It is noted that the old reference stored in
'mm_gc->gc.of_node' should also be decreased.
This patch is based on the fact that there is a call site in function
'qe_add_gpiochips()' of src file 'drivers\soc\fsl\qe\gpio.c'. In this
function, of_mm_gpiochip_add_data() is contained in an iteration of
for_each_compatible_node() which will automatically increase and
decrease the refcount. So we need additional of_node_get() for the
reference escape in of_mm_gpiochip_add_data().
Fixes: a19e3da5bc ("of/gpio: Kill of_gpio_chip and add members directly to gpio_chip")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
* Clean up the GPIO driver of Intel EG20 PCH
The following is an automated git shortlog grouped by driver:
pch:
- Change PCI device macros
- Use dev_err_probe()
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSu93Raj3rZDNXzGZv7cr9lmVa5zAUCYsiZVAAKCRD7cr9lmVa5
zGNfAQDIAbAkO4eJKxX/dnWzA1v3I48hzWWU8Gs6wLQFCQ80GAEAtoGSpKMkhgCE
SFYpnRicJHxOewjvCiL/61p8Vc38sgs=
=skec
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into TEST_MERGE
intel-gpio for v5.20-1
* Clean up the GPIO driver of Intel EG20 PCH
The following is an automated git shortlog grouped by driver:
pch:
- Change PCI device macros
- Use dev_err_probe()
Instead of open coding, use device_match_of_node() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
It's wrong to use defined string literal for three semantically different
cases, i.e.:
1) compatible string, which is part of ABI and has to have specific format;
2) I2C ID, which is user space visible and also ABI;
3) driver name, that can be changed.
Drop the define and use appropriate string literals in place.
While at it, drop comma at terminator entry of OF ID table.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
There is nothing directly using of specific interfaces in this driver,
so lets not include the headers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Add V2.1 rockchip gpio controller type, which is part of the
RK3588 SoC.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The PCA9571 very similar to the PCA9570, it only differs in the
number of GPIOs.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
