still a fair amount going on, including:
- Reorganizing the architecture-specific documentation under
Documentation/arch. This makes the structure match the source directory
and helps to clean up the mess that is the top-level Documentation
directory a bit. This work creates the new directory and moves x86 and
most of the less-active architectures there. The current plan is to move
the rest of the architectures in 6.5, with the patches going through the
appropriate subsystem trees.
- Some more Spanish translations and maintenance of the Italian
translation.
- A new "Kernel contribution maturity model" document from Ted.
- A new tutorial on quickly building a trimmed kernel from Thorsten.
Plus the usual set of updates and fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmRGze0PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y/VsH/RyWqinorRVFZmHqRJMRhR0j7hE2pAgK5prE
dGXYVtHHNQ+25thNaqhZTOLYFbSX6ii2NG7sLRXmyOTGIZrhUCFFXCHkuq4ZUypR
gJpMUiKQVT4dhln3gIZ0k09NSr60gz8UTcq895N9UFpUdY1SCDhbCcLc4uXTRajq
NrdgFaHWRkPb+gBRbXOExYm75DmCC6Ny5AyGo2rXfItV//ETjWIJVQpJhlxKrpMZ
3LgpdYSLhEFFnFGnXJ+EAPJ7gXDi2Tg5DuPbkvJyFOTouF3j4h8lSS9l+refMljN
xNRessv+boge/JAQidS6u8F2m2ESSqSxisv/0irgtKIMJwXaoX4=
=1//8
-----END PGP SIGNATURE-----
Merge tag 'docs-6.4' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Commit volume in documentation is relatively low this time, but there
is still a fair amount going on, including:
- Reorganize the architecture-specific documentation under
Documentation/arch
This makes the structure match the source directory and helps to
clean up the mess that is the top-level Documentation directory a
bit. This work creates the new directory and moves x86 and most of
the less-active architectures there.
The current plan is to move the rest of the architectures in 6.5,
with the patches going through the appropriate subsystem trees.
- Some more Spanish translations and maintenance of the Italian
translation
- A new "Kernel contribution maturity model" document from Ted
- A new tutorial on quickly building a trimmed kernel from Thorsten
Plus the usual set of updates and fixes"
* tag 'docs-6.4' of git://git.lwn.net/linux: (47 commits)
media: Adjust column width for pdfdocs
media: Fix building pdfdocs
docs: clk: add documentation to log which clocks have been disabled
docs: trace: Fix typo in ftrace.rst
Documentation/process: always CC responsible lists
docs: kmemleak: adjust to config renaming
ELF: document some de-facto PT_* ABI quirks
Documentation: arm: remove stih415/stih416 related entries
docs: turn off "smart quotes" in the HTML build
Documentation: firmware: Clarify firmware path usage
docs/mm: Physical Memory: Fix grammar
Documentation: Add document for false sharing
dma-api-howto: typo fix
docs: move m68k architecture documentation under Documentation/arch/
docs: move parisc documentation under Documentation/arch/
docs: move ia64 architecture docs under Documentation/arch/
docs: Move arc architecture docs under Documentation/arch/
docs: move nios2 documentation under Documentation/arch/
docs: move openrisc documentation under Documentation/arch/
docs: move superh documentation under Documentation/arch/
...
LoongArch maintains cache coherency in hardware, but when paired with
LS7A chipsets the WUC attribute (Weak-ordered UnCached, which is similar
to WriteCombine) is out of the scope of cache coherency machanism for
PCIe devices (this is a PCIe protocol violation, which may be fixed in
newer chipsets).
This means WUC can only used for write-only memory regions now, so this
option is disabled by default, making WUC silently fallback to SUC for
ioremap(). You can enable this option if the kernel is ensured to run on
hardware without this bug.
Kernel parameter writecombine=on/off can be used to override the Kconfig
option.
Cc: stable@vger.kernel.org
Suggested-by: WANG Xuerui <kernel@xen0n.name>
Reviewed-by: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy. Move
Documentation/m68k into arch/ and fix all in-tree references.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Move the x86 documentation under Documentation/arch/ as a way of cleaning
up the top-level directory and making the structure of our docs more
closely match the structure of the source directories it describes.
All in-kernel references to the old paths have been updated.
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-arch@vger.kernel.org
Cc: x86@kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20230315211523.108836-1-corbet@lwn.net/
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Remove PARIDE core and high level protocols, taking care not to break
low-level drivers (used by pata_parport). Also update documentation.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Move some out-of-place kernel parameters into their correct
locations.
Move one out-of-order keyword/legend in kernel-parameters.rst.
Add some missing keyword legends in kernel-parameters.rst:
HIBERNATION HYPER_V
and drop some obsolete/removed keyword legends:
EIDE IOSCHED OSS TS XT
Correct the location of the setup.h file.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
RCU code supports an 'all' group as a special case when parsing rcu_nocbs
parameter. This patch moves the 'all' support to the core bitmap_parse
code, so that all bitmap users can enjoy this extension.
Moving 'all' parsing to a bitmap_parse level also allows users to pass
patterns together with 'all' in regular group:pattern format, for example,
"rcu_nocbs=all:1/2" would offload all the even-numbered CPUs regardless
of the number of CPUs on the system.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
- Bitmap support for "N" as alias for last bit
- kvfree_rcu updates
- mm_dump_obj() updates. (One of these is to mm, but was suggested by Andrew Morton.)
- RCU callback offloading update
- Polling RCU grace-period interfaces
- Realtime-related RCU updates
- Tasks-RCU updates
- Torture-test updates
- Torture-test scripting updates
- Miscellaneous fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mpNt
-----END PGP SIGNATURE-----
Merge tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
- Support for "N" as alias for last bit in bitmap parsing library (eg
using syntax like "nohz_full=2-N")
- kvfree_rcu updates
- mm_dump_obj() updates. (One of these is to mm, but was suggested by
Andrew Morton.)
- RCU callback offloading update
- Polling RCU grace-period interfaces
- Realtime-related RCU updates
- Tasks-RCU updates
- Torture-test updates
- Torture-test scripting updates
- Miscellaneous fixes
* tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
rcutorture: Test start_poll_synchronize_rcu() and poll_state_synchronize_rcu()
rcu: Provide polling interfaces for Tiny RCU grace periods
torture: Fix kvm.sh --datestamp regex check
torture: Consolidate qemu-cmd duration editing into kvm-transform.sh
torture: Print proper vmlinux path for kvm-again.sh runs
torture: Make TORTURE_TRUST_MAKE available in kvm-again.sh environment
torture: Make kvm-transform.sh update jitter commands
torture: Add --duration argument to kvm-again.sh
torture: Add kvm-again.sh to rerun a previous torture-test
torture: Create a "batches" file for build reuse
torture: De-capitalize TORTURE_SUITE
torture: Make upper-case-only no-dot no-slash scenario names official
torture: Rename SRCU-t and SRCU-u to avoid lowercase characters
torture: Remove no-mpstat error message
torture: Record kvm-test-1-run.sh and kvm-test-1-run-qemu.sh PIDs
torture: Record jitter start/stop commands
torture: Extract kvm-test-1-run-qemu.sh from kvm-test-1-run.sh
torture: Record TORTURE_KCONFIG_GDB_ARG in qemu-cmd
torture: Abstract jitter.sh start/stop into scripts
rcu: Provide polling interfaces for Tree RCU grace periods
...
While this is done for all bitmaps, the original use case in mind was
for CPU masks and cpulist_parse() as described below.
It seems that a common configuration is to use the 1st couple cores for
housekeeping tasks. This tends to leave the remaining ones to form a
pool of similarly configured cores to take on the real workload of
interest to the user.
So on machine A - with 32 cores, it could be 0-3 for "system" and then
4-31 being used in boot args like nohz_full=, or rcu_nocbs= as part of
setting up the worker pool of CPUs.
But then newer machine B is added, and it has 48 cores, and so while
the 0-3 part remains unchanged, the pool setup cpu list becomes 4-47.
Multiple deployment becomes easier when we can just simply replace 31
and 47 with "N" and let the system substitute in the actual number at
boot; a number that it knows better than we do.
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Yury Norov <yury.norov@gmail.com> # move it from CPU code
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
early_param memmap is only implemented on X86, MIPS and XTENSA. To avoid
wasting users’ time on trying this on platform like ARM, mark it clearly.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20201128195121.2556-1-song.bao.hua@hisilicon.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add device links after the devices are created (but before they are
probed) by looking at common DT bindings like clocks and
interconnects.
Automatically adding device links for functional dependencies at the
framework level provides the following benefits:
- Optimizes device probe order and avoids the useless work of
attempting probes of devices that will not probe successfully
(because their suppliers aren't present or haven't probed yet).
For example, in a commonly available mobile SoC, registering just
one consumer device's driver at an initcall level earlier than the
supplier device's driver causes 11 failed probe attempts before the
consumer device probes successfully. This was with a kernel with all
the drivers statically compiled in. This problem gets a lot worse if
all the drivers are loaded as modules without direct symbol
dependencies.
- Supplier devices like clock providers, interconnect providers, etc
need to keep the resources they provide active and at a particular
state(s) during boot up even if their current set of consumers don't
request the resource to be active. This is because the rest of the
consumers might not have probed yet and turning off the resource
before all the consumers have probed could lead to a hang or
undesired user experience.
Some frameworks (Eg: regulator) handle this today by turning off
"unused" resources at late_initcall_sync and hoping all the devices
have probed by then. This is not a valid assumption for systems with
loadable modules. Other frameworks (Eg: clock) just don't handle
this due to the lack of a clear signal for when they can turn off
resources. This leads to downstream hacks to handle cases like this
that can easily be solved in the upstream kernel.
By linking devices before they are probed, we give suppliers a clear
count of the number of dependent consumers. Once all of the
consumers are active, the suppliers can turn off the unused
resources without making assumptions about the number of consumers.
By default we just add device-links to track "driver presence" (probe
succeeded) of the supplier device. If any other functionality provided
by device-links are needed, it is left to the consumer/supplier
devices to change the link when they probe.
kbuild test robot reported clang error about missing const
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20190904211126.47518-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the m68k kernel-options.txt file to ReST.
The conversion is trivial, as the document is already on a format
close enough to ReST. Just some small adjustments were needed in
order to make it both good for being parsed while keeping it on
a good txt shape.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The current ReStructuredText formatting results in "--", used to
indicate the end of the kernel command-line parameters, appearing as
an en-dash instead of two hyphens; this patch formats them as code,
"``--``", as done elsewhere in the documentation.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Mostly due to x86 and acpi conversion, several documentation
links are still pointing to the old file. Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com>
Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add ARM64 to the legend of architectures. It's already used in several
places in kernel-parameters.txt.
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The Analog Devices Blackfin port was added in 2007 and was rather
active for a while, but all work on it has come to a standstill
over time, as Analog have changed their product line-up.
Aaron Wu confirmed that the architecture port is no longer relevant,
and multiple people suggested removing blackfin independently because
of some of its oddities like a non-working SMP port, and the amount of
duplication between the chip variants, which cause extra work when
doing cross-architecture changes.
Link: https://docs.blackfin.uclinux.org/
Acked-by: Aaron Wu <Aaron.Wu@analog.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The "isolcpus=" and "nohz_full=" boot parameters depend on CPU Isolation
support. Let's document that.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: kernel test robot <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/1513275507-29200-4-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Command line options allow us to ignore features that we don't want.
Also we can re-enable options that have been disabled on a platform
(so long as the underlying h/w actually supports the option).
[ tglx: Marked the option array __initdata and the helper function __init ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Fenghua" <fenghua.yu@intel.com>
Cc: Ravi V" <ravi.v.shankar@intel.com>
Cc: "Peter Zijlstra" <peterz@infradead.org>
Cc: "Stephane Eranian" <eranian@google.com>
Cc: "Andi Kleen" <ak@linux.intel.com>
Cc: "David Carrillo-Cisneros" <davidcc@google.com>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Link: http://lkml.kernel.org/r/0c37b0d4dbc30977a3c1cee08b66420f83662694.1503512900.git.tony.luck@intel.com
guide for user-space API documents, rather sparsely populated at the
moment, but it's a start. Markus improved the infrastructure for
converting diagrams. Mauro has converted much of the USB documentation
over to RST. Plus the usual set of fixes, improvements, and tweaks.
There's a bit more than the usual amount of reaching out of Documentation/
to fix comments elsewhere in the tree; I have acks for those where I could
get them.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJZB1elAAoJEI3ONVYwIuV6wUIQAJSM/4rNdj6z+GXeWhRfbsOo
vqqVYluvXQIJaaqdsy9dgcfThhOXWYsPyVF6Xd+bDJpwF3BMZYbX1CI1Mo3kRD+7
9+Pf68cYSHRoU3l/sFI8q0zfKbHtmFteIvnRQoFtRaExqgTR8glUfxNDyN9XuNAZ
3naS4qMZivM4gjMcSpIB/wFOQpV+6qVIs6VTFLdCC8wodT3W/Wmb+bqrCVJ0twbB
t8jJeYHt2wsiTdqrKU+VilAUAZ1Lby+DNfeWrO18rC1ohktPyUzOGg8JmTKUBpVO
qj1OJwD6abuaNh/J9bXsh8u0OrVrBKWjVrhq9IFYDlm92fu3Bgr6YeoaVPEpcklt
jdlgZnWs9/oXa6d32aMc9F7mP9a0Q1qikFTYINhaHQZCb4VDRuQ9hCSuqWm5jlVy
lmVAoxLa0zSdOoXaYuO3HC99ku1cIn814CXMDz/IwKXkqUCV+zl+H3AGkvxGyQ5M
eblw2TnQnc6e1LRcxt5bgpFR1JYMbCJhu0U5XrNFueQV8ReB15dvL7h4y21dWJKF
2Sr83rwfG1rpZQiSqCjOXxIzuXbEGH3+a+zCDV5IHhQRt/VNDOt2hgmcyucSSJ5h
5GRFYgTlGvoT/6LdIT39QooHB+4tSDRtEQ6lh0q2ZtVV2rfG/I6/PR5sUbWM65SN
vAfctRm2afHLhdonSX5O
=41m+
-----END PGP SIGNATURE-----
Merge tag 'docs-4.12' of git://git.lwn.net/linux
Pull documentation update from Jonathan Corbet:
"A reasonably busy cycle for documentation this time around. There is a
new guide for user-space API documents, rather sparsely populated at
the moment, but it's a start. Markus improved the infrastructure for
converting diagrams. Mauro has converted much of the USB documentation
over to RST. Plus the usual set of fixes, improvements, and tweaks.
There's a bit more than the usual amount of reaching out of
Documentation/ to fix comments elsewhere in the tree; I have acks for
those where I could get them"
* tag 'docs-4.12' of git://git.lwn.net/linux: (74 commits)
docs: Fix a couple typos
docs: Fix a spelling error in vfio-mediated-device.txt
docs: Fix a spelling error in ioctl-number.txt
MAINTAINERS: update file entry for HSI subsystem
Documentation: allow installing man pages to a user defined directory
Doc/PM: Sync with intel_powerclamp code behavior
zr364xx.rst: usb/devices is now at /sys/kernel/debug/
usb.rst: move documentation from proc_usb_info.txt to USB ReST book
convert philips.txt to ReST and add to media docs
docs-rst: usb: update old usbfs-related documentation
arm: Documentation: update a path name
docs: process/4.Coding.rst: Fix a couple of document refs
docs-rst: fix usb cross-references
usb: gadget.h: be consistent at kernel doc macros
usb: composite.h: fix two warnings when building docs
usb: get rid of some ReST doc build errors
usb.rst: get rid of some Sphinx errors
usb/URB.txt: convert to ReST and update it
usb/persist.txt: convert to ReST and add to driver-api book
usb/hotplug.txt: convert to ReST and add to driver-api book
...
The AVR32 architecture support has been removed from the Linux kernel,
hence remove all references to it from Documentation.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Håvard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
In Documentation/process/4.Coding.rst there were a couple of paragraphs
that spilled over the 80 character line length. This was likely caused
when the document was converted to reStructuredText. Re-flow the
paragraphs and make the document references proper reStructuredText
:ref: links.
This also adds the appropriate reStructuredText file heading to
kernel-parameters.rst as referenced by the kernel-parameters link in
this patch.
Signed-off-by: Andrew Clayton <andrew@digital-domain.net>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fix typos in admin-guide directory.
Make documentation clear and grammatically correct.
Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The admin guide is a good start, but it's time to turn it into something
better than an unordered blob of files. This is a first step in that
direction. The TOC has been split up and annotated, the guides have been
reordered, and minor tweaks have been applied to a few of them.
One consequence of splitting up the TOC is that we don't really want to use
:numbered: anymore, since the count resets every time and there doesn't
seem to be a way to change that. Eventually we probably want to group the
documents into sub-books, at which point we can go back to a single TOC,
but it's probably early to do that.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The previous patch renamed several files that are cross-referenced
along the Kernel documentation. Adjust the links to point to
the right places.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Place README, REPORTING-BUGS, SecurityBugs and kernel-parameters
on an user's manual book.
As we'll be numbering the user's manual, remove the manual
numbering from SecurityBugs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
