The function below is used only within this source file, but is not static.
drivers/gpu/drm/imagination/pvr_vm.c:542:6: error: no previous prototype for 'pvr_gpuvm_free' [-Werror=missing-prototypes]
542 | void pvr_gpuvm_free(struct drm_gpuvm *gpuvm)
Make it static.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311242159.hh8MWiAm-lkp@intel.com/
Fixes: ff5f643de0 ("drm/imagination: Add GEM and VM related code")
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Link: https://lore.kernel.org/r/20231130160017.259902-4-donald.robson@imgtec.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The function below is used only within this source file, but is not static.
>> drivers/gpu/drm/imagination/pvr_device.c:129:6: warning: no previous prototype for function 'pvr_device_process_active_queues' [-Wmissing-prototypes]
129 | void pvr_device_process_active_queues(struct pvr_device *pvr_dev)
| ^
drivers/gpu/drm/imagination/pvr_device.c:129:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
129 | void pvr_device_process_active_queues(struct pvr_device *pvr_dev)
| ^
| static
1 warning generated.
Make it static.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311250632.giVEx7MU-lkp@intel.com/
Fixes: eaf01ee5ba ("drm/imagination: Implement job submission and scheduling")
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-3-donald.robson@imgtec.com
A missing header causes the compiler to warn that the function below is not
forward declared.
>> drivers/gpu/drm/imagination/pvr_fw_meta.c:33:1: warning: no previous prototype for function 'pvr_meta_cr_read32' [-Wmissing-prototypes]
33 | pvr_meta_cr_read32(struct pvr_device *pvr_dev, u32 reg_addr, u32 *reg_value_out)
| ^
drivers/gpu/drm/imagination/pvr_fw_meta.c:32:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
32 | int
| ^
| static
1 warning generated.
Include the correct header.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311250226.Da2yiSKp-lkp@intel.com/
Fixes: cc1aeedb98 ("drm/imagination: Implement firmware infrastructure and META FW support")
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-2-donald.robson@imgtec.com
This line appears to confuse the compiler and had been noticed previously in
clang-tidy output. There isn't anything fundamentally wrong that I can see.
I suspect that it just looks like a mistake - hence the first note. By making
the second operand an actual bool result, const correctness can be preserved
while silencing the warning.
>> drivers/gpu/drm/imagination/pvr_device_info.c:230:47: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
230 | } else if (features_size == mapping_max_size && (mapping_max & 63)) {
| ^ ~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/imagination/pvr_device_info.c:230:47: note: use '&' for a bitwise operation
230 | } else if (features_size == mapping_max_size && (mapping_max & 63)) {
| ^~
| &
drivers/gpu/drm/imagination/pvr_device_info.c:230:47: note: remove constant to silence this warning
230 | } else if (features_size == mapping_max_size && (mapping_max & 63)) {
| ~^~~~~~~~~~~~~~~~~~~~~
1 warning generated.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311241752.3iLyyFcA-lkp@intel.com/
Fixes: f99f5f3ea7 ("drm/imagination: Add GPU ID parsing and firmware loading")
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130160017.259902-1-donald.robson@imgtec.com
This patch introduces an initial KUnit test suite for GEM objects
backed by shmem buffers.
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marco Pagani <marpagan@redhat.com>
v5:
- using __drm_kunit_helper_alloc_drm_device() to avoid local struct
v4:
- Add missing MMU dependency for DRM_GEM_SHMEM_HELPER (kernel test robot)
v3:
- Explicitly cast pointers in the helpers
- Removed unused pointer to parent dev in struct fake_dev
- Test entries reordering in Kconfig and Makefile sent as a separate patch
v2:
- Improved description of test cases
- Cleaner error handling using KUnit actions
- Alphabetical order in Kconfig and Makefile
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130171417.74162-1-marpagan@redhat.com
drm_bridge_hpd_enable()/drm_bridge_hpd_disable() callbacks call into
the respective driver's hpd_enable()/hpd_disable() ops. These ops control
the HPD enable/disable logic which in some cases like MSM can be a
dedicate hardware block to control the HPD.
During probe_defer cases, a connector can be initialized and then later
destroyed till the probe is retried. During connector destroy in these
cases, the hpd_disable() callback gets called without a corresponding
hpd_enable() leading to an unbalanced state potentially causing even
a crash.
This can be avoided by the respective drivers maintaining their own
state logic to ensure that a hpd_disable() without a corresponding
hpd_enable() just returns without doing anything.
However, to have a generic fix it would be better to avoid the
hpd_disable() callback from the connector destroy path and let
the hpd_enable() / hpd_disable() balance be maintained by the
corresponding drm_bridge_connector_enable_hpd() /
drm_bridge_connector_disable_hpd() APIs which should get called by
drm_kms_helper_disable_hpd().
changes in v2:
- minor change in commit text (Dmitry)
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919174813.26958-1-quic_abhinavk@quicinc.com
While making the changes in [1], it was noted that the documentation
of the enable_hpd() and disable_hpd() does not make it clear that
these ops should not try to do hpd state maintenance and should only
enable/disable hpd related hardware for the connector.
The state management of these calls to make sure these calls are
balanced is handled by the DRM core and we should keep it that way
to minimize the overhead in the drivers which implement these ops.
[1]: https://patchwork.freedesktop.org/patch/558387/
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920201358.27597-1-quic_abhinavk@quicinc.com
Loosen the requirements for atomic and legacy commit so that, in cases
where pixel_source != FB, the commit can still go through.
This includes adding framebuffer NULL checks in other areas to account for
FB being NULL when non-FB pixel sources are enabled.
To disable a plane, the pixel_source must be NONE or the FB must be NULL
if pixel_source == FB.
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-7-780188bfa7b2@quicinc.com
Currently framebuffer checks happen directly in
drm_atomic_plane_check(). Move these checks into their own helper
method.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-6-780188bfa7b2@quicinc.com
Add "SOLID_FILL" as a valid pixel source. If the pixel_source property is
set to "SOLID_FILL", it will display data from the drm_plane "solid_fill"
blob property.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-3-780188bfa7b2@quicinc.com
Document and add support for solid_fill property to drm_plane. In
addition, add support for setting and getting the values for solid_fill.
To enable solid fill planes, userspace must assign a property blob to
the "solid_fill" plane property containing the following information:
struct drm_mode_solid_fill {
u32 r, g, b, pad;
};
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-2-780188bfa7b2@quicinc.com
Add support for pixel_source property to drm_plane and related
documentation. In addition, force pixel_source to
DRM_PLANE_PIXEL_SOURCE_FB in DRM_IOCTL_MODE_SETPLANE as to not break
legacy userspace.
This enum property will allow user to specify a pixel source for the
plane. Possible pixel sources will be defined in the
drm_plane_pixel_source enum.
Currently, the only pixel sources are DRM_PLANE_PIXEL_SOURCE_FB (the
default value) and DRM_PLANE_PIXEL_SOURCE_NONE.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sebastian Wick <sebastian@sebastianwick.net>
Acked-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027-solid-fill-v7-1-780188bfa7b2@quicinc.com
This consists of simply storing the most recent deadline, and adding an
ioctl to retrieve the deadline. This can be used in conjunction with
the SET_DEADLINE ioctl on a fence fd for testing. Ie. create various
sw_sync fences, merge them into a fence-array, set deadline on the
fence-array and confirm that it is propagated properly to each fence.
v2: Switch UABI to express deadline as u64
v3: More verbose UAPI docs, show how to convert from timespec
v4: Better comments, track the soonest deadline, as a normal fence
implementation would, return an error if no deadline set.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230823215458.203366-4-robdclark@gmail.com
Add a new flag to let userspace provide a deadline as a hint for syncobj
and timeline waits. This gives a hint to the driver signaling the
backing fences about how soon userspace needs it to compete work, so it
can adjust GPU frequency accordingly. An immediate deadline can be
given to provide something equivalent to i915 "wait boost".
v2: Use absolute u64 ns value for deadline hint, drop cap and driver
feature flag in favor of allowing count_handles==0 as a way for
userspace to probe kernel for support of new flag
v3: More verbose comments about UAPI
v4: Fix negative zero, s/deadline_ns/deadline_nsec/ for consistency with
existing ioctl struct fields
v5: Comment/description typo fixes
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
[DB: fixed checkpatch warnings]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230823215458.203366-2-robdclark@gmail.com
Currently the QAIC DRM device registers itself when the MHI QAIC_CONTROL
channel becomes available. This is when the device is able to process
workloads. However, the DRM driver also provides the debugfs interface
bootlog for the device. If the device fails to boot to the QSM (which
brings up the MHI QAIC_CONTROL channel), the bootlog won't be available for
debugging why it failed to boot.
Change when the DRM device registers itself from when QAIC_CONTROL is
available to when the card is first probed on the PCI bus. Additionally,
make the DRM driver persist through reset/error cases so the driver
doesn't have to be reloaded to access the card again. Send
KOBJ_ONLINE/OFFLINE uevents so userspace can know when DRM device is
ready to handle requests.
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117174337.20174-3-quic_jhugo@quicinc.com
'in_reset' holds the state of the device. As part of bringup, the device
needs to be queried to check if it's in a valid state. Add a new state
that indicates that the device is coming up, but not ready for users
yet. Rename to 'dev_state' to better describe the variable.
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117174337.20174-2-quic_jhugo@quicinc.com
The struct imx_lcdc driver data is allocated using devm_drm_dev_alloc()
so it must not be explicitly kfree()d.
Also drm_kms_helper_poll_fini() should not be called as there is no
matching drm_kms_helper_poll_init(). So drop the release function
completely.
Fixes: c87e859cde ("drm/imx/lcdc: Implement DRM driver for imx25")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706092731.2630232-1-u.kleine-koenig@pengutronix.de
A CPU job is a type of job that performs operations that requires CPU
intervention. A copy performance query job is a job that copy the complete
or partial result of a query to a buffer. In order to copy the result of
a performance query to a buffer, we need to get the values from the
performance monitors.
So, create a user extension for the CPU job that enables the creation
of a copy performance query job. This user extension will allow the creation
of a CPU job that copy the results of a performance query to a BO with the
possibility to indicate the availability with a availability bit.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-19-mcanal@igalia.com
A CPU job is a type of job that performs operations that requires CPU
intervention. A reset performance query job is a job that resets the
performance queries by resetting the values of the perfmons. Moreover,
we also reset the syncobjs related to the availability of the query.
So, create a user extension for the CPU job that enables the creation
of a reset performance job. This user extension will allow the creation of
a CPU job that resets the perfmons values and resets the availability syncobj.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-18-mcanal@igalia.com
A CPU job is a type of job that performs operations that requires CPU
intervention. A copy timestamp query job is a job that copy the complete
or partial result of a query to a buffer. As V3D doesn't provide any
mechanism to obtain a timestamp from the GPU, it is a job that needs
CPU intervention.
So, create a user extension for the CPU job that enables the creation
of a copy timestamp query job. This user extension will allow the creation
of a CPU job that copy the results of a timestamp query to a BO with the
possibility to indicate the timestamp availability with a availability bit.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-17-mcanal@igalia.com
A CPU job is a type of job that performs operations that requires CPU
intervention. A reset timestamp job is a job that resets the timestamp
queries based on the value offset of the first query. As V3D doesn't
provide any mechanism to obtain a timestamp from the GPU, it is a job
that needs CPU intervention.
So, create a user extension for the CPU job that enables the creation
of a reset timestamp job. This user extension will allow the creation of
a CPU job that resets the timestamp value in the timestamp BO and resets
the availability syncobj.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-16-mcanal@igalia.com
A CPU job is a type of job that performs operations that requires CPU
intervention. A timestamp query job is a job that calculates the
query timestamp and updates the query availability by signaling a
syncobj. As V3D doesn't provide any mechanism to obtain a timestamp
from the GPU, it is a job that needs CPU intervention.
So, create a user extension for the CPU job that enables the creation
of a timestamp query job. This user extension will allow the creation of
a CPU job that performs the timestamp query calculation and updates the
timestamp BO with the proper value.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-15-mcanal@igalia.com
A CPU job is a type of job that performs operations that requires CPU
intervention. An indirect CSD job is a job that, when executed in the
queue, will map the indirect buffer, read the dispatch parameters, and
submit a regular dispatch. Therefore, it is a job that needs CPU
intervention.
So, create a user extension for the CPU job that enables the creation
of an indirect CSD. This user extension will allow the creation of a CSD
job linked to a CPU job. The CPU job will wait for the indirect CSD job
dependencies and, once they are signaled, it will update the CSD job
parameters.
Co-developed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-14-mcanal@igalia.com
For the indirect CSD CPU job, we will need to access the internal
contents of the BO with the dispatch parameters. Therefore, create
methods to allow the mapping and unmapping of the BO.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-13-mcanal@igalia.com
Create tracepoints to track the three major events of a CPU job
lifetime:
1. Submission of a `v3d_submit_cpu` IOCTL
2. Beginning of the execution of a CPU job
3. Ending of the execution of a CPU job
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-11-mcanal@igalia.com
Currently, v3d_get_extensions() only parses multisync data and assigns
it to the `struct v3d_submit_ext`. But, to implement the CPU job with
user extensions, we want v3d_get_extensions() to be able to parse CPU
job data and assign it to the `struct v3d_cpu_job`.
Therefore, allow the function v3d_get_extensions() to use `struct v3d_cpu_job *`
as a parameter. If the `struct v3d_cpu_job *` is assigned to NULL, it means
that the job is a GPU job and CPU job extensions should be rejected.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-10-mcanal@igalia.com
Create a new type of job, a CPU job. A CPU job is a type of job that
performs operations that requires CPU intervention. The overall idea is
to use user extensions to enable different types of CPU job, allowing the
CPU job to perform different operations according to the type of user
extension. The user extension ID identify the type of CPU job that must
be dealt.
Having a CPU job is interesting for synchronization purposes as a CPU
job has a queue like any other V3D job and can be synchoronized by the
multisync extension.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Co-developed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-9-mcanal@igalia.com
We want to allow the IOCTLs to allocate the job without initiating it.
This will be useful for the CPU job submission IOCTL, as the CPU job has
the need to use information from the user extensions. Currently, the
user extensions are parsed before the job allocation, making it
impossible to fill the CPU job when parsing the user extensions.
Therefore, decouple the job allocation from the job initiation.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-8-mcanal@igalia.com
Currently, two multisync extensions can be added to the same job and
only the last multisync extension will be used. To avoid this
vulnerability, don't allow two multisync extensions in the same job.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-7-mcanal@igalia.com
We will include a new job submission type, the CPU job submission. For
readability and maintability, separate the job submission IOCTLs and
related operations from v3d_gem.c.
Minor fix in the CSD submission kernel doc:
CSD (texture formatting) -> CSD (compute shader).
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-5-mcanal@igalia.com
IOCTLs related to BO operations reside on the file v3d_bo.c. The wait BO
ioctl is the only IOCTL regarding BOs that is placed in a different file.
So, move it to the v3d_bo.c file.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130164420.932823-4-mcanal@igalia.com
At the moment the driver does not use DRM_PLANE_COMMIT_ACTIVE_ONLY, but
still checks for crtc->state->active in tidss_crtc_atomic_flush(), and
skips the flush if the crtc is not active.
The exact reason why DRM_PLANE_COMMIT_ACTIVE_ONLY is not used has been
lost in history. DRM_PLANE_COMMIT_ACTIVE_ONLY does also affect the plane
updates, and I think the issue was related to multi-display systems and
moving planes between the displays. However, it is possible the issue
was only present on the older DSS hardware, handled by the omapdrm
driver (on which the tidss driver is loosely based).
Reviewing the code related to DRM_PLANE_COMMIT_ACTIVE_ONLY does not show
any issues, and testing on J7 EVM with two displays works fine.
Change the driver to use DRM_PLANE_COMMIT_ACTIVE_ONLY.
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-11-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
tidss_crtc_atomic_flush() checks if the crtc is enabled, and if not,
returns immediately as there's no reason to do any register changes.
However, the code checks for 'crtc->state->enable', which does not
reflect the actual HW state. We should instead look at the
'crtc->state->active' flag.
This causes the tidss_crtc_atomic_flush() to proceed with the flush even
if the active state is false, which then causes us to hit the
WARN_ON(!crtc->state->event) check.
Fix this by checking the active flag, and while at it, fix the related
debug print which had "active" and "needs modeset" wrong way.
Cc: <stable@vger.kernel.org>
Fixes: 32a1795f57 ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-10-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The IRQ setup code is overly complex. All we really need to do is
initialize the related fields in struct tidss_device, and request the
IRQ.
We can drop all the HW accesses, as they are pointless: the driver will
set the IRQs correctly when it needs any of the IRQs, and at probe time
we have done a reset, so we know that all the IRQs are masked by default
in the hardware.
Thus we can combine the tidss_irq_preinstall() and
tidss_irq_postinstall() into the tidss_irq_install() function, drop the
HW accesses, and drop the use of spinlock, as this is done at init time
and there can be no races.
We can also drop the HW access from the tidss_irq_uninstall(), as the
driver will anyway disable and suspend the hardware at remove time.
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-9-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The probe function calls dispc_softreset() before runtime PM is enabled
and without enabling any of the DSS clocks. This happens to work by
luck, and we need to make sure the DSS HW is active and the fclk is
enabled.
To fix the above, add a new function, dispc_init_hw(), which does:
- pm_runtime_set_active()
- clk_prepare_enable(fclk)
- dispc_softreset().
This ensures that the reset can be successfully accomplished.
Note that we use pm_runtime_set_active(), not the normal
pm_runtime_get(). The reason for this is that at this point we haven't
enabled the runtime PM yet and also we don't want the normal resume
callback to be called: the dispc resume callback does some initial HW
setup, and it expects that the HW was off (no video ports are
streaming). If the bootloader has enabled the DSS and has set up a
boot time splash-screen, the DSS would be enabled and streaming which
might lead to issues with the normal resume callback.
Fixes: c9b2d923be ("drm/tidss: Soft Reset DISPC on startup")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-8-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
K2G display controller does not support soft reset, but we can do the
most important steps manually: mask the IRQs and disable the VPs.
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-7-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
K2G doesn't have softreset feature. Instead of having every caller of
dispc_softreset() check for K2G, move the check into dispc_softreset(),
and make dispc_softreset() return 0 in case of K2G.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-6-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
We do a DSS reset in the middle of the dispc_init(). While that happens
to work now, we should really make sure that e..g the fclk, which is
acquired only later in the function, is enabled when doing a reset. This
will be handled in a later patch, but for now, let's move the
dispc_softreset() call to the end of dispc_init(), which is a sensible
place for it anyway.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-4-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Use runtime PM autosuspend feature, with 1s timeout, to avoid
unnecessary suspend-resume cycles when, e.g. the userspace temporarily
turns off the crtcs when configuring the outputs.
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-2-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync(), which
will handle error situations better. Also fix the return, as there
should be no reason for the current complex return.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-1-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
