commit 07edfece8b upstream.
At CPU-hotplug time, unbind_worker() may preempt a worker while it is
waking up. In that case the following scenario can happen:
unbind_workers() wq_worker_running()
-------------- -------------------
if (!(worker->flags & WORKER_NOT_RUNNING))
//PREEMPTED by unbind_workers
worker->flags |= WORKER_UNBOUND;
[...]
atomic_set(&pool->nr_running, 0);
//resume to worker
atomic_inc(&worker->pool->nr_running);
After unbind_worker() resets pool->nr_running, the value is expected to
remain 0 until the pool ever gets rebound in case cpu_up() is called on
the target CPU in the future. But here the race leaves pool->nr_running
with a value of 1, triggering the following warning when the worker goes
idle:
WARNING: CPU: 3 PID: 34 at kernel/workqueue.c:1823 worker_enter_idle+0x95/0xc0
Modules linked in:
CPU: 3 PID: 34 Comm: kworker/3:0 Not tainted 5.16.0-rc1+ #34
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
Workqueue: 0x0 (rcu_par_gp)
RIP: 0010:worker_enter_idle+0x95/0xc0
Code: 04 85 f8 ff ff ff 39 c1 7f 09 48 8b 43 50 48 85 c0 74 1b 83 e2 04 75 99 8b 43 34 39 43 30 75 91 8b 83 00 03 00 00 85 c0 74 87 <0f> 0b 5b c3 48 8b 35 70 f1 37 01 48 8d 7b 48 48 81 c6 e0 93 0
RSP: 0000:ffff9b7680277ed0 EFLAGS: 00010086
RAX: 00000000ffffffff RBX: ffff93465eae9c00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9346418a0000 RDI: ffff934641057140
RBP: ffff934641057170 R08: 0000000000000001 R09: ffff9346418a0080
R10: ffff9b768027fdf0 R11: 0000000000002400 R12: ffff93465eae9c20
R13: ffff93465eae9c20 R14: ffff93465eae9c70 R15: ffff934641057140
FS: 0000000000000000(0000) GS:ffff93465eac0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000001cc0c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
worker_thread+0x89/0x3d0
? process_one_work+0x400/0x400
kthread+0x162/0x190
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30
</TASK>
Also due to this incorrect "nr_running == 1", further queued work may
end up not being served, because no worker is awaken at work insert time.
This raises rcutorture writer stalls for example.
Fix this with disabling preemption in the right place in
wq_worker_running().
It's worth noting that if the worker migrates and runs concurrently with
unbind_workers(), it is guaranteed to see the WORKER_UNBOUND flag update
due to set_cpus_allowed_ptr() acquiring/releasing rq->lock.
Fixes: 6d25be5782 ("sched/core, workqueues: Distangle worker accounting from rq lock")
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d25302e465 ]
Some unfriendly component, such as dpdk, write the same mask to
unbound kworker cpumask again and again. Every time it write to
this interface some work is queue to cpu, even though the mask
is same with the original mask.
So, fix it by return success and do nothing if the cpumask is
equal with the old one.
Signed-off-by: Mengen Sun <mengensun@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Console drivers often queue work while holding locks also taken in their
console write paths, something which can lead to deadlocks on SMP when
dumping workqueue state (e.g. sysrq-t or on suspend failures).
For serial console drivers this could look like:
CPU0 CPU1
---- ----
show_workqueue_state();
lock(&pool->lock); <IRQ>
lock(&port->lock);
schedule_work();
lock(&pool->lock);
printk();
lock(console_owner);
lock(&port->lock);
where workqueues are, for example, used to push data to the line
discipline, process break signals and handle modem-status changes. Line
disciplines and serdev drivers can also queue work on write-wakeup
notifications, etc.
Reworking every console driver to avoid queuing work while holding locks
also taken in their write paths would complicate drivers and is neither
desirable or feasible.
Instead use the deferred-printk mechanism to avoid printing while
holding pool locks when dumping workqueue state.
Note that there are a few WARN_ON() assertions in the workqueue code
which could potentially also trigger a deadlock. Hopefully the ongoing
printk rework will provide a general solution for this eventually.
This was originally reported after a lockdep splat when executing
sysrq-t with the imx serial driver.
Fixes: 3494fc3084 ("workqueue: dump workqueues on sysrq-t")
Cc: stable@vger.kernel.org # 4.0
Reported-by: Fabio Estevam <festevam@denx.de>
Tested-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
There was no strong reason to or not to flush barrier work items in
flush_workqueue(). And we have to make barrier work items not participate
in nr_active so we had been using WORK_NO_COLOR for them which also makes
them can't be flushed by flush_workqueue().
And the users of flush_workqueue() often do not intend to wait barrier work
items issued by flush_work(). That made the choice sound perfect.
But barrier work items have reference to internal structure (pool_workqueue)
and the worker thread[s] is/are still busy for the workqueue user when the
barrrier work items are not done. So it is reasonable to make flush_workqueue()
also watch for flush_work() to make it more robust.
And a problem[1] reported by Li Zhe shows that we need such robustness.
The warning logs are listed below:
WARNING: CPU: 0 PID: 19336 at kernel/workqueue.c:4430 destroy_workqueue+0x11a/0x2f0
*****
destroy_workqueue: test_workqueue9 has the following busy pwq
pwq 4: cpus=2 node=0 flags=0x0 nice=0 active=0/1 refcnt=2
in-flight: 5658:wq_barrier_func
Showing busy workqueues and worker pools:
*****
It shows that even after drain_workqueue() returns, the barrier work item
is still in flight and the pwq (and a worker) is still busy on it.
The problem is caused by flush_workqueue() not watching flush_work():
Thread A Worker
/* normal work item with linked */
process_scheduled_works()
destroy_workqueue() process_one_work()
drain_workqueue() /* run normal work item */
/-- pwq_dec_nr_in_flight()
flush_workqueue() <---/
/* the last normal work item is done */
sanity_check process_one_work()
/-- raw_spin_unlock_irq(&pool->lock)
raw_spin_lock_irq(&pool->lock) <-/ /* maybe preempt */
*WARNING* wq_barrier_func()
/* maybe preempt by cond_resched() */
Thread A can get the pool lock after the Worker unlocks the pool lock before
running wq_barrier_func(). And if there is any preemption happen around
wq_barrier_func(), destroy_workqueue()'s sanity check is more likely to
get the lock and catch it. (Note: preemption is not necessary to cause the bug,
the unlocking is enough to possibly trigger the WARNING.)
A simple solution might be just executing all linked barrier work items
once without releasing pool lock after the head work item's
pwq_dec_nr_in_flight(). But this solution has two problems:
1) the head work item might also be barrier work item when the user-queued
work item is cancelled. For example:
thread 1: thread 2:
queue_work(wq, &my_work)
flush_work(&my_work)
cancel_work_sync(&my_work);
/* Neiter my_work nor the barrier work is scheduled. */
destroy_workqueue(wq);
/* This is an easier way to catch the WARNING. */
2) there might be too much linked barrier work items and running them
all once without releasing pool lock just causes trouble.
The only solution is to make flush_workqueue() aslo watch barrier work
items. So we have to assign a color to these barrier work items which
is the color of the head (user-queued) work item.
Assigning a color doesn't cause any problem in ative management, because
the prvious patch made barrier work items not participate in nr_active
via WORK_STRUCT_INACTIVE rather than reliance on the (old) WORK_NO_COLOR.
[1]: https://lore.kernel.org/lkml/20210812083814.32453-1-lizhe.67@bytedance.com/
Reported-by: Li Zhe <lizhe.67@bytedance.com>
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, WORK_NO_COLOR has two meanings:
Not participate in flushing
Not participate in nr_active
And only non-barrier work items are marked with WORK_STRUCT_INACTIVE
when they are in inactive_works list. The barrier work items are not
marked INACTIVE even linked in inactive_works list since these tail
items are always moved together with the head work item.
These definitions are simple, clean and practical. (Except a small
blemish that only the first meaning of WORK_NO_COLOR is documented in
include/linux/workqueue.h while both meanings are in workqueue.c)
But dual-purpose WORK_NO_COLOR used for barrier work items has proven to
be problematical[1]. Only the second purpose is obligatory. So we plan
to make barrier work items participate in flushing but keep them still
not participating in nr_active.
So the plan is to mark barrier work items inactive without using
WORK_NO_COLOR in this patch so that we can assign a flushing color to
them in next patch.
The reasonable way is to add or reuse a bit in work data of the work
item. But adding a bit will double the size of pool_workqueue.
Currently, WORK_STRUCT_INACTIVE is only used in try_to_grab_pending()
for user-queued work items and try_to_grab_pending() can't work for
barrier work items. So we extend WORK_STRUCT_INACTIVE to also mark
barrier work items no matter which list they are in because we don't
need to determind which list a barrier work item is in.
So the meaning of WORK_STRUCT_INACTIVE becomes just "the work items don't
participate in nr_active" (no matter whether it is a barrier work item or
a user-queued work item). And WORK_STRUCT_INACTIVE for user-queued work
items means they are in inactive_works list.
This patch does it by setting WORK_STRUCT_INACTIVE for barrier work items
in insert_wq_barrier() and checking WORK_STRUCT_INACTIVE first in
pwq_dec_nr_in_flight(). And the meaning of WORK_NO_COLOR is reduced to
only "not participating in flushing".
There is no functionality change intended in this patch. Because
WORK_NO_COLOR+WORK_STRUCT_INACTIVE represents the previous WORK_NO_COLOR
in meaning and try_to_grab_pending() doesn't use for barrier work items
and avoids being confused by this extended WORK_STRUCT_INACTIVE.
A bunch of comment for nr_active & WORK_STRUCT_INACTIVE is also added for
documenting how WORK_STRUCT_INACTIVE works in nr_active management.
[1]: https://lore.kernel.org/lkml/20210812083814.32453-1-lizhe.67@bytedance.com/
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add a local var @work_flags to calculate work_flags step by step, so that
we don't need to squeeze several flags in only the last line of code.
Parepare for next patch to add a bit to barrier work item's flag. Not
squshing this to next patch makes it clear that what it will have changed.
No functional change intended.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Make pwq_dec_nr_in_flight() use work_data rather just work_color.
Prepare for later patch to get WORK_STRUCT_INACTIVE bit from work_data
in pwq_dec_nr_in_flight().
No functional change intended.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
There are two kinds of "delayed" work items in workqueue subsystem.
One is for timer-delayed work items which are visible to workqueue users.
The other kind is for work items delayed by active management which can
not be directly visible to workqueue users. We mixed the word "delayed"
for both kinds and caused somewhat ambiguity.
This patch renames the later one (delayed by active management) to
"inactive", because it is used for workqueue active management and
most of its related symbols are named with "active" or "activate".
All "delayed" and "DELAYED" are carefully checked and renamed one by
one to avoid accidentally changing the name of the other kind for
timer-delayed.
No functional change intended.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Cc: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Replace ida_simple_get() with ida_alloc() and ida_simple_remove() with
ida_free(), the latter is more concise and intuitive.
In addition, if ida_alloc() fails, NULL is returned directly. This
eliminates unnecessary initialization of two local variables and an 'if'
judgment.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In error handling branch "if (WARN_ON(node == NUMA_NO_NODE))", the
previously allocated memories are not released. Doing this before
allocating memory eliminates memory leaks.
tj: Note that the condition only occurs when the arch code is pretty broken
and the WARN_ON might as well be BUG_ON().
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
If VCPU is suspended (VM suspend) in wq_watchdog_timer_fn() then
once this VCPU resumes it will see the new jiffies value, while it
may take a while before IRQ detects PVCLOCK_GUEST_STOPPED on this
VCPU and updates all the watchdogs via pvclock_touch_watchdogs().
There is a small chance of misreported WQ stalls in the meantime,
because new jiffies is time_after() old 'ts + thresh'.
wq_watchdog_timer_fn()
{
for_each_pool(pool, pi) {
if (time_after(jiffies, ts + thresh)) {
pr_emerg("BUG: workqueue lockup - pool");
}
}
}
Save jiffies at the beginning of this function and use that value
for stall detection. If VM gets suspended then we continue using
"old" jiffies value and old WQ touch timestamps. If IRQ at some
point restarts the stall detection cycle (pvclock_touch_watchdogs())
then old jiffies will always be before new 'ts + thresh'.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)
-----BEGIN PGP SIGNATURE-----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=wU6U
-----END PGP SIGNATURE-----
Merge tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
With CONFIG_CFI_CLANG, a callback function passed to
__queue_delayed_work from a module points to a jump table entry
defined in the module instead of the one used in the core kernel,
which breaks function address equality in this check:
WARN_ON_ONCE(timer->function != delayed_work_timer_fn);
Use WARN_ON_FUNCTION_MISMATCH() instead to disable the warning
when CFI and modules are both enabled.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-6-samitolvanen@google.com
84;0;0c84;0;0c
There are two workqueue-specific watchdog timestamps:
+ @wq_watchdog_touched_cpu (per-CPU) updated by
touch_softlockup_watchdog()
+ @wq_watchdog_touched (global) updated by
touch_all_softlockup_watchdogs()
watchdog_timer_fn() checks only the global @wq_watchdog_touched for
unbound workqueues. As a result, unbound workqueues are not aware
of touch_softlockup_watchdog(). The watchdog might report a stall
even when the unbound workqueues are blocked by a known slow code.
Solution:
touch_softlockup_watchdog() must touch also the global @wq_watchdog_touched
timestamp.
The global timestamp can no longer be used for bound workqueues because
it is now updated from all CPUs. Instead, bound workqueues have to check
only @wq_watchdog_touched_cpu and these timestamps have to be updated for
all CPUs in touch_all_softlockup_watchdogs().
Beware:
The change might cause the opposite problem. An unbound workqueue
might get blocked on CPU A because of a real softlockup. The workqueue
watchdog would miss it when the timestamp got touched on CPU B.
It is acceptable because softlockups are detected by softlockup
watchdog. The workqueue watchdog is there to detect stalls where
a work never finishes, for example, because of dependencies of works
queued into the same workqueue.
V3:
- Modify the commit message clearly according to Petr's suggestion.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The debug_work_activate() is called on the premise that
the work can be inserted, because if wq be in WQ_DRAINING
status, insert work may be failed.
Fixes: e41e704bc4 ("workqueue: improve destroy_workqueue() debuggability")
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull qorkqueue updates from Tejun Heo:
"Tracepoint and comment updates only"
* 'for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Use %s instead of function name
workqueue: tracing the name of the workqueue instead of it's address
workqueue: fix annotation for WQ_SYSFS
It is better to replace the function name with %s, in case the function
name changes.
Signed-off-by: Stephen Zhang <stephenzhangzsd@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
create_worker() will already set the right affinity using
kthread_bind_mask(), this means only the rescuer will need to change
it's affinity.
Howveer, while in cpu-hot-unplug a regular task is not allowed to run
on online&&!active as it would be pushed away quite agressively. We
need KTHREAD_IS_PER_CPU to survive in that environment.
Therefore set the affinity after getting that magic flag.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.826629830@infradead.org
Mark the per-cpu workqueue workers as KTHREAD_IS_PER_CPU.
Workqueues have unfortunate semantics in that per-cpu workers are not
default flushed and parked during hotplug, however a subset does
manual flush on hotplug and hard relies on them for correctness.
Therefore play silly games..
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210121103506.693465814@infradead.org
The scheduler won't break affinity for us any more, and we should
"emulate" the same behavior when the scheduler breaks affinity for
us. The behavior is "changing the cpumask to cpu_possible_mask".
And there might be some other CPUs online later while the worker is
still running with the pending work items. The worker should be allowed
to use the later online CPUs as before and process the work items ASAP.
If we use cpu_active_mask here, we can't achieve this goal but
using cpu_possible_mask can.
Fixes: 06249738a4 ("workqueue: Manually break affinity on hotplug")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210111152638.2417-4-jiangshanlai@gmail.com
Pull workqueue update from Tejun Heo:
"The same as the cgroup tree - one commit which was scheduled for the
5.11 merge window.
All the commit does is avoding spurious worker wakeups from workqueue
allocation / config change path to help cpuisol use cases"
* 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Kick a worker based on the actual activation of delayed works
Merge misc updates from Andrew Morton:
- a few random little subsystems
- almost all of the MM patches which are staged ahead of linux-next
material. I'll trickle to post-linux-next work in as the dependents
get merged up.
Subsystems affected by this patch series: kthread, kbuild, ide, ntfs,
ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache,
gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation,
kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc,
uaccess, zram, and cleanups).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits)
mm: cleanup kstrto*() usage
mm: fix fall-through warnings for Clang
mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at
mm: shmem: convert shmem_enabled_show to use sysfs_emit_at
mm:backing-dev: use sysfs_emit in macro defining functions
mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening
mm: use sysfs_emit for struct kobject * uses
mm: fix kernel-doc markups
zram: break the strict dependency from lzo
zram: add stat to gather incompressible pages since zram set up
zram: support page writeback
mm/process_vm_access: remove redundant initialization of iov_r
mm/zsmalloc.c: rework the list_add code in insert_zspage()
mm/zswap: move to use crypto_acomp API for hardware acceleration
mm/zswap: fix passing zero to 'PTR_ERR' warning
mm/zswap: make struct kernel_param_ops definitions const
userfaultfd/selftests: hint the test runner on required privilege
userfaultfd/selftests: fix retval check for userfaultfd_open()
userfaultfd/selftests: always dump something in modes
userfaultfd: selftests: make __{s,u}64 format specifiers portable
...
Patch series "kasan: add workqueue stack for generic KASAN", v5.
Syzbot reports many UAF issues for workqueue, see [1].
In some of these access/allocation happened in process_one_work(), we
see the free stack is useless in KASAN report, it doesn't help
programmers to solve UAF for workqueue issue.
This patchset improves KASAN reports by making them to have workqueue
queueing stack. It is useful for programmers to solve use-after-free or
double-free memory issue.
Generic KASAN also records the last two workqueue stacks and prints them
in KASAN report. It is only suitable for generic KASAN.
[1] https://groups.google.com/g/syzkaller-bugs/search?q=%22use-after-free%22+process_one_work
[2] https://bugzilla.kernel.org/show_bug.cgi?id=198437
This patch (of 4):
When analyzing use-after-free or double-free issue, recording the
enqueuing work stacks is helpful to preserve usage history which
potentially gives a hint about the affected code.
For workqueue it has turned out to be useful to record the enqueuing work
call stacks. Because user can see KASAN report to determine whether it is
root cause. They don't need to enable debugobjects, but they have a
chance to find out the root cause.
Link: https://lkml.kernel.org/r/20201203022148.29754-1-walter-zh.wu@mediatek.com
Link: https://lkml.kernel.org/r/20201203022442.30006-1-walter-zh.wu@mediatek.com
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In realtime scenario, We do not want to have interference on the
isolated cpu cores. but when invoking alloc_workqueue() for percpu wq
on the housekeeping cpu, it kick a kworker on the isolated cpu.
alloc_workqueue
pwq_adjust_max_active
wake_up_worker
The comment in pwq_adjust_max_active() said:
"Need to kick a worker after thawed or an unbound wq's
max_active is bumped"
So it is unnecessary to kick a kworker for percpu's wq when invoking
alloc_workqueue(). this patch only kick a worker based on the actual
activation of delayed works.
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Don't rely on the scheduler to force break affinity for us -- it will
stop doing that for per-cpu-kthreads.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.464718669@infradead.org
As warned by Sphinx:
./Documentation/core-api/workqueue:400: ./kernel/workqueue.c:1218: WARNING: Unexpected indentation.
the return code table is currently not recognized, as it lacks
markups.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This should make it harder for the kernel to corrupt the debug object
descriptor, used to call functions to fixup state and track debug objects,
by moving the structure to read-only memory.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200815004027.2046113-3-swboyd@chromium.org
Any runtime WARN_ON() has to be fixed, and BUILD_BUG_ON() can
help you nitice it earlier.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This is no point to unlock() and then lock() the same mutex
back to back.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
008847f66c ("workqueue: allow rescuer thread to do more work.") made
the rescuer worker requeue the pwq immediately if there may be more
work items which need rescuing instead of waiting for the next mayday
timer expiration. Unfortunately, it checks only whether the pool needs
help from rescuers, but it doesn't check whether the pwq has work items
in the pool (the real reason that this rescuer can help for the pool).
The patch adds the check and void unneeded requeuing.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The workqueue code has it's internal spinlocks (pool::lock), which
are acquired on most workqueue operations. These spinlocks are
converted to 'sleeping' spinlocks on a RT-kernel.
Workqueue functions can be invoked from contexts which are truly atomic
even on a PREEMPT_RT enabled kernel. Taking sleeping locks from such
contexts is forbidden.
The pool::lock hold times are bound and the code sections are
relatively short, which allows to convert pool::lock and as a
consequence wq_mayday_lock to raw spinlocks which are truly spinning
locks even on a PREEMPT_RT kernel.
With the previous conversion of the manager waitqueue to a simple
waitqueue workqueues are now fully RT compliant.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The workqueue code has it's internal spinlock (pool::lock) and also
implicit spinlock usage in the wq_manager waitqueue. These spinlocks
are converted to 'sleeping' spinlocks on a RT-kernel.
Workqueue functions can be invoked from contexts which are truly atomic
even on a PREEMPT_RT enabled kernel. Taking sleeping locks from such
contexts is forbidden.
pool::lock can be converted to a raw spinlock as the lock held times
are short. But the workqueue manager waitqueue is handled inside of
pool::lock held regions which again violates the lock nesting rules
of raw and regular spinlocks.
The manager waitqueue has no special requirements like custom wakeup
callbacks or mass wakeups. While it does not use exclusive wait mode
explicitly there is no strict requirement to queue the waiters in a
particular order as there is only one waiter at a time.
This allows to replace the waitqueue with rcuwait which solves the
locking problem because rcuwait relies on existing locking.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
The data structure member "wq->rescuer" was reset to a null pointer
in one if branch. It was passed to a call of the function "kfree"
in the callback function "rcu_free_wq" (which was eventually executed).
The function "kfree" does not perform more meaningful data processing
for a passed null pointer (besides immediately returning from such a call).
Thus delete this function call which became unnecessary with the referenced
software update.
Fixes: def98c84b6 ("workqueue: Fix spurious sanity check failures in destroy_workqueue()")
Suggested-by: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Zhang Qiang <qiang.zhang@windriver.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We need to preserve error code before freeing "rescuer".
Fixes: f187b6974f ("workqueue: Use IS_ERR and PTR_ERR instead of PTR_ERR_OR_ZERO.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Replace inline function PTR_ERR_OR_ZERO with IS_ERR and PTR_ERR to
remove redundant parameter definitions and checks.
Reduce code size.
Before:
text data bss dec hex filename
47510 5979 840 54329 d439 kernel/workqueue.o
After:
text data bss dec hex filename
47474 5979 840 54293 d415 kernel/workqueue.o
Signed-off-by: Sean Fu <fxinrong@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The kernel test robot triggered a warning with the following race:
task-ctx A interrupt-ctx B
worker
-> process_one_work()
-> work_item()
-> schedule();
-> sched_submit_work()
-> wq_worker_sleeping()
-> ->sleeping = 1
atomic_dec_and_test(nr_running)
__schedule(); *interrupt*
async_page_fault()
-> local_irq_enable();
-> schedule();
-> sched_submit_work()
-> wq_worker_sleeping()
-> if (WARN_ON(->sleeping)) return
-> __schedule()
-> sched_update_worker()
-> wq_worker_running()
-> atomic_inc(nr_running);
-> ->sleeping = 0;
-> sched_update_worker()
-> wq_worker_running()
if (!->sleeping) return
In this context the warning is pointless everything is fine.
An interrupt before wq_worker_sleeping() will perform the ->sleeping
assignment (0 -> 1 > 0) twice.
An interrupt after wq_worker_sleeping() will trigger the warning and
nr_running will be decremented (by A) and incremented once (only by B, A
will skip it). This is the case until the ->sleeping is zeroed again in
wq_worker_running().
Remove the WARN statement because this condition may happen. Document
that preemption around wq_worker_sleeping() needs to be disabled to
protect ->sleeping and not just as an optimisation.
Fixes: 6d25be5782 ("sched/core, workqueues: Distangle worker accounting from rq lock")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: https://lkml.kernel.org/r/20200327074308.GY11705@shao2-debian
Pull workqueue updates from Tejun Heo:
"Nothing too interesting. Just two trivial patches"
* 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Mark up unlocked access to wq->first_flusher
workqueue: Make workqueue_init*() return void
[ 7329.671518] BUG: KCSAN: data-race in flush_workqueue / flush_workqueue
[ 7329.671549]
[ 7329.671572] write to 0xffff8881f65fb250 of 8 bytes by task 37173 on cpu 2:
[ 7329.671607] flush_workqueue+0x3bc/0x9b0 (kernel/workqueue.c:2844)
[ 7329.672527]
[ 7329.672540] read to 0xffff8881f65fb250 of 8 bytes by task 37175 on cpu 0:
[ 7329.672571] flush_workqueue+0x28d/0x9b0 (kernel/workqueue.c:2835)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
wq_select_unbound_cpu() is designed for unbound workqueues only, but
it's wrongly called when using a bound workqueue too.
Fixing this ensures work queued to a bound workqueue with
cpu=WORK_CPU_UNBOUND always runs on the local CPU.
Before, that would happen only if wq_unbound_cpumask happened to include
it (likely almost always the case), or was empty, or we got lucky with
forced round-robin placement. So restricting
/sys/devices/virtual/workqueue/cpumask to a small subset of a machine's
CPUs would cause some bound work items to run unexpectedly there.
Fixes: ef55718044 ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs")
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Hillf Danton <hdanton@sina.com>
[dj: massage changelog]
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
The return values of workqueue_init() and workqueue_early_int() are
always 0, and there is no usage of their return value. So just make
them return void.
Signed-off-by: Yu Chen <chen.yu@easystack.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull scheduler updates from Ingo Molnar:
"These were the main changes in this cycle:
- More -rt motivated separation of CONFIG_PREEMPT and
CONFIG_PREEMPTION.
- Add more low level scheduling topology sanity checks and warnings
to filter out nonsensical topologies that break scheduling.
- Extend uclamp constraints to influence wakeup CPU placement
- Make the RT scheduler more aware of asymmetric topologies and CPU
capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y
- Make idle CPU selection more consistent
- Various fixes, smaller cleanups, updates and enhancements - please
see the git log for details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
sched/fair: Define sched_idle_cpu() only for SMP configurations
sched/topology: Assert non-NUMA topology masks don't (partially) overlap
idle: fix spelling mistake "iterrupts" -> "interrupts"
sched/fair: Remove redundant call to cpufreq_update_util()
sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled
sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP
sched/fair: calculate delta runnable load only when it's needed
sched/cputime: move rq parameter in irqtime_account_process_tick
stop_machine: Make stop_cpus() static
sched/debug: Reset watchdog on all CPUs while processing sysrq-t
sched/core: Fix size of rq::uclamp initialization
sched/uclamp: Fix a bug in propagating uclamp value in new cgroups
sched/fair: Load balance aggressively for SCHED_IDLE CPUs
sched/fair : Improve update_sd_pick_busiest for spare capacity case
watchdog: Remove soft_lockup_hrtimer_cnt and related code
sched/rt: Make RT capacity-aware
sched/fair: Make EAS wakeup placement consider uclamp restrictions
sched/fair: Make task_fits_capacity() consider uclamp restrictions
sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with()
sched/uclamp: Make uclamp util helpers use and return UL values
...
It's surprising that workqueue_execute_end includes only the work when
its counterpart workqueue_execute_start has both the work and the worker
function.
You can't set a tracing filter or trigger based on the function, and
postprocessing scripts interested in specific functions are harder to
write since they have to remember the work from _start and match it up
with the same field in _end.
Add the function name, taking care to use the copy stashed in the
worker since the work is no longer safe to touch.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Update the comment to use PREEMPTION because it is true for both
preemption models.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20191015191821.11479-35-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle were:
- Dynamic tick (nohz) updates, perhaps most notably changes to force
the tick on when needed due to lengthy in-kernel execution on CPUs
on which RCU is waiting.
- Linux-kernel memory consistency model updates.
- Replace rcu_swap_protected() with rcu_prepace_pointer().
- Torture-test updates.
- Documentation updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
security/safesetid: Replace rcu_swap_protected() with rcu_replace_pointer()
net/sched: Replace rcu_swap_protected() with rcu_replace_pointer()
net/netfilter: Replace rcu_swap_protected() with rcu_replace_pointer()
net/core: Replace rcu_swap_protected() with rcu_replace_pointer()
bpf/cgroup: Replace rcu_swap_protected() with rcu_replace_pointer()
fs/afs: Replace rcu_swap_protected() with rcu_replace_pointer()
drivers/scsi: Replace rcu_swap_protected() with rcu_replace_pointer()
drm/i915: Replace rcu_swap_protected() with rcu_replace_pointer()
x86/kvm/pmu: Replace rcu_swap_protected() with rcu_replace_pointer()
rcu: Upgrade rcu_swap_protected() to rcu_replace_pointer()
rcu: Suppress levelspread uninitialized messages
rcu: Fix uninitialized variable in nocb_gp_wait()
rcu: Update descriptions for rcu_future_grace_period tracepoint
rcu: Update descriptions for rcu_nocb_wake tracepoint
rcu: Remove obsolete descriptions for rcu_barrier tracepoint
rcu: Ensure that ->rcu_urgent_qs is set before resched IPI
workqueue: Convert for_each_wq to use built-in list check
rcu: Several rcu_segcblist functions can be static
rcu: Remove unused function hlist_bl_del_init_rcu()
Documentation: Rename rcu_node_context_switch() to rcu_note_context_switch()
...
