Consolidate the APIC base RESET logic, which is currently spread out
across both x86 and vendor code. For an in-kernel APIC, the vendor code
is redundant. But for a userspace APIC, KVM relies on the vendor code
to initialize vcpu->arch.apic_base. Hoist the vcpu->arch.apic_base
initialization above the !apic check so that it applies to both flavors
of APIC emulation, and delete the vendor code.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stuff vcpu->arch.apic_base and apic->base_address directly during APIC
reset, as opposed to bouncing through kvm_set_apic_base() while fudging
the ENABLE bit during creation to avoid the other, unwanted side effects.
This is a step towards consolidating the APIC RESET logic across x86,
VMX, and SVM.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-18-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set the BSP bit appropriately during local APIC "reset" instead of
relying on vendor code to clean up at a later point. This is a step
towards consolidating the local APIC, VMX, and SVM xAPIC initialization
code.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't set the BSP bit in vcpu->arch.apic_base when the local APIC is
managed by userspace. Forcing all vCPUs to be BSPs is non-sensical, and
was dead code when it was added by commit 97222cc831 ("KVM: Emulate
local APIC in kernel"). At the time, kvm_lapic_set_base() was invoked
if and only if the local APIC was in-kernel (and it couldn't be called
before the vCPU created its APIC).
kvm_lapic_set_base() eventually gained generic usage, but the latent bug
escaped notice because the only true consumer would be the guest itself
in the form of an explicit RDMSRs on APs. Out of Linux, SeaBIOS, and
EDK2/OVMF, only OVMF consumes the BSP bit from the APIC_BASE MSR. For
the vast majority of usage in OVMF, BSP confusion would be benign.
OVMF's BSP election upon SMI rendezvous might be broken, but practically
no one runs KVM with an out-of-kernel local APIC, let alone does so while
utilizing SMIs with OVMF.
Fixes: 97222cc831 ("KVM: Emulate local APIC in kernel")
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove a BSP APIC update in kvm_lapic_reset() that is a glorified and
confusing nop. When the code was originally added, kvm_vcpu_is_bsp()
queried kvm->arch.bsp_vcpu, i.e. the intent was to set the BSP bit in the
BSP vCPU's APIC. But, stuffing the BSP bit at INIT was wrong since the
guest can change its BSP(s); this was fixed by commit 58d269d8cc ("KVM:
x86: BSP in MSR_IA32_APICBASE is writable").
In other words, kvm_vcpu_is_bsp() is now purely a reflection of
vcpu->arch.apic_base.MSR_IA32_APICBASE_BSP, thus the update will always
set the current value and kvm_lapic_set_base() is effectively a nop if
the new and old values match. The RESET case, which does need to stuff
the BSP for the reset vCPU, is handled by vendor code (though this will
soon be moved to common code).
No functional change intended.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN if KVM ends up in a state where it thinks its APIC map needs to be
recalculated, but KVM is not emulating the local APIC. This is mostly
to document KVM's "rules" in order to provide clarity in future cleanups.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210713163324.627647-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_GET_LAPIC stores the current value of TMCCT and KVM_SET_LAPIC's memcpy
stores it in vcpu->arch.apic->regs, KVM_SET_LAPIC could store zero in
vcpu->arch.apic->regs after it uses it, and then the stored value would
always be zero. In addition, the TMCCT is always computed on-demand and
never directly readable.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1623223000-18116-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No functional change intended. At present, the only negative value
returned by kvm_check_nested_events is -EBUSY.
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210604172611.281819-6-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per the SDM, "any access that touches bytes 4 through 15 of an APIC
register may cause undefined behavior and must not be executed."
Worse, such an access in kvm_lapic_reg_read can result in a leak of
kernel stack contents. Prior to commit 01402cf810 ("kvm: LAPIC:
write down valid APIC registers"), such an access was explicitly
disallowed. Restore the guard that was removed in that commit.
Fixes: 01402cf810 ("kvm: LAPIC: write down valid APIC registers")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Message-Id: <20210602205224.3189316-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the SDM 10.5.4.1:
A write of 0 to the initial-count register effectively stops the local
APIC timer, in both one-shot and periodic mode.
However, the lapic timer oneshot/periodic mode which is emulated by vmx-preemption
timer doesn't stop by writing 0 to TMICT since vmx->hv_deadline_tsc is still
programmed and the guest will receive the spurious timer interrupt later. This
patch fixes it by also cancelling the vmx-preemption timer when writing 0 to
the initial-count register.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1623050385-100988-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_REQ_UNBLOCK will be used to exit a vcpu from
its inner vcpu halt emulation loop.
Rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK, switch
PowerPC to arch specific request bit.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20210525134321.303768132@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's treat lapic_timer_advance_ns automatic tuning logic as hypervisor
overhead, move it before wait_lapic_expire instead of between wait_lapic_expire
and the world switch, the wait duration should be calculated by the
up-to-date guest_tsc after the overhead of automatic tuning logic. This
patch reduces ~30+ cycles for kvm-unit-tests/tscdeadline-latency when testing
busy waits.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1621339235-11131-5-git-send-email-wanpengli@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit ee66e453db (KVM: lapic: Busy wait for timer to expire when
using hv_timer) tries to set ktime->expired_tscdeadline by checking
ktime->hv_timer_in_use since lapic timer oneshot/periodic modes which
are emulated by vmx preemption timer also get advanced, they leverage
the same vmx preemption timer logic with tsc-deadline mode. However,
ktime->hv_timer_in_use is cleared before apic_timer_expired() handling,
let's delay this clearing in preemption-disabled region.
Fixes: ee66e453db ("KVM: lapic: Busy wait for timer to expire when using hv_timer")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1619608082-4187-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Async PF 'page ready' event may happen when LAPIC is (temporary) disabled.
In particular, Sebastien reports that when Linux kernel is directly booted
by Cloud Hypervisor, LAPIC is 'software disabled' when APF mechanism is
initialized. On initialization KVM tries to inject 'wakeup all' event and
puts the corresponding token to the slot. It is, however, failing to inject
an interrupt (kvm_apic_set_irq() -> __apic_accept_irq() -> !apic_enabled())
so the guest never gets notified and the whole APF mechanism gets stuck.
The same issue is likely to happen if the guest temporary disables LAPIC
and a previously unavailable page becomes available.
Do two things to resolve the issue:
- Avoid dequeuing 'page ready' events from APF queue when LAPIC is
disabled.
- Trigger an attempt to deliver pending 'page ready' events when LAPIC
becomes enabled (SPIV or MSR_IA32_APICBASE).
Reported-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210422092948.568327-1-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Synthesize a nested VM-Exit if L2 triggers an emulated triple fault
instead of exiting to userspace, which likely will kill L1. Any flow
that does KVM_REQ_TRIPLE_FAULT is suspect, but the most common scenario
for L2 killing L1 is if L0 (KVM) intercepts a contributory exception that
is _not_intercepted by L1. E.g. if KVM is intercepting #GPs for the
VMware backdoor, a #GP that occurs in L2 while vectoring an injected #DF
will cause KVM to emulate triple fault.
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210302174515.2812275-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Advancing the timer expiration should only be necessary on guest initiated
writes. When we cancel the timer and clear .pending during state restore,
clear expired_tscdeadline as well.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1614818118-965-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When posting a deadline timer interrupt, open code the checks guarding
__kvm_wait_lapic_expire() in order to skip the lapic_timer_int_injected()
check in kvm_wait_lapic_expire(). The injection check will always fail
since the interrupt has not yet be injected. Moving the call after
injection would also be wrong as that wouldn't actually delay delivery
of the IRQ if it is indeed sent via posted interrupt.
Fixes: 010fd37fdd ("KVM: LAPIC: Reduce world switch latency caused by timer_advance_ns")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305021808.3769732-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, Hyper-V context is part of 'struct kvm_vcpu_arch' and is always
available. As a preparation to allocating it dynamically, check that it is
not NULL at call sites which can normally proceed without it i.e. the
behavior is identical to the situation when Hyper-V emulation is not being
used by the guest.
When Hyper-V context for a particular vCPU is not allocated, we may still
need to get 'vp_index' from there. E.g. in a hypothetical situation when
Hyper-V emulation was enabled on one CPU and wasn't on another, Hyper-V
style send-IPI hypercall may still be used. Luckily, vp_index is always
initialized to kvm_vcpu_get_idx() and can only be changed when Hyper-V
context is present. Introduce kvm_hv_get_vpindex() helper for
simplification.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-12-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vcpu_to_synic()'s argument is almost always 'vcpu' so there's no need to
have an additional prefix. Also, as this is used outside of hyper-v
emulation code, add '_hv_' part to make it clear what this s. This makes
the naming more consistent with to_hv_vcpu().
Rename synic_to_vcpu() to hv_synic_to_vcpu() for consistency.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert kvm_x86_ops to use static calls. Note that all kvm_x86_ops are
covered here except for 'pmu_ops and 'nested ops'.
Here are some numbers running cpuid in a loop of 1 million calls averaged
over 5 runs, measured in the vm (lower is better).
Intel Xeon 3000MHz:
|default |mitigations=off
-------------------------------------
vanilla |.671s |.486s
static call|.573s(-15%)|.458s(-6%)
AMD EPYC 2500MHz:
|default |mitigations=off
-------------------------------------
vanilla |.710s |.609s
static call|.664s(-6%) |.609s(0%)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Message-Id: <e057bf1b8a7ad15652df6eeba3f907ae758d3399.1610680941.git.jbaron@akamai.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The use of 'struct static_key' and 'static_key_false' is
deprecated. Use the new API.
Signed-off-by: Cun Li <cun.jia.li@gmail.com>
Message-Id: <20210111152435.50275-1-cun.jia.li@gmail.com>
[Make it compile. While at it, rename kvm_no_apic_vcpu to
kvm_has_noapic_vcpu; the former reads too much like "true if
no vCPU has an APIC". - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Typically under KVM, an AP is booted using the INIT-SIPI-SIPI sequence,
where the guest vCPU register state is updated and then the vCPU is VMRUN
to begin execution of the AP. For an SEV-ES guest, this won't work because
the guest register state is encrypted.
Following the GHCB specification, the hypervisor must not alter the guest
register state, so KVM must track an AP/vCPU boot. Should the guest want
to park the AP, it must use the AP Reset Hold exit event in place of, for
example, a HLT loop.
First AP boot (first INIT-SIPI-SIPI sequence):
Execute the AP (vCPU) as it was initialized and measured by the SEV-ES
support. It is up to the guest to transfer control of the AP to the
proper location.
Subsequent AP boot:
KVM will expect to receive an AP Reset Hold exit event indicating that
the vCPU is being parked and will require an INIT-SIPI-SIPI sequence to
awaken it. When the AP Reset Hold exit event is received, KVM will place
the vCPU into a simulated HLT mode. Upon receiving the INIT-SIPI-SIPI
sequence, KVM will make the vCPU runnable. It is again up to the guest
to then transfer control of the AP to the proper location.
To differentiate between an actual HLT and an AP Reset Hold, a new MP
state is introduced, KVM_MP_STATE_AP_RESET_HOLD, which the vCPU is
placed in upon receiving the AP Reset Hold exit event. Additionally, to
communicate the AP Reset Hold exit event up to userspace (if needed), a
new exit reason is introduced, KVM_EXIT_AP_RESET_HOLD.
A new x86 ops function is introduced, vcpu_deliver_sipi_vector, in order
to accomplish AP booting. For VMX, vcpu_deliver_sipi_vector is set to the
original SIPI delivery function, kvm_vcpu_deliver_sipi_vector(). SVM adds
a new function that, for non SEV-ES guests, invokes the original SIPI
delivery function, kvm_vcpu_deliver_sipi_vector(), but for SEV-ES guests,
implements the logic above.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <e8fbebe8eb161ceaabdad7c01a5859a78b424d5e.1609791600.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stephen Zhang <stephenzhangzsd@gmail.com>
Message-Id: <1608277897-1932-1-git-send-email-stephenzhangzsd@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the commit 1c96dcceae
("KVM: x86: fix apic_accept_events vs check_nested_events"),
we accidently started latching SIPIs that are received while the cpu is not
waiting for them.
This causes vCPUs to never enter a halted state.
Fixes: 1c96dcceae ("KVM: x86: fix apic_accept_events vs check_nested_events")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201203143319.159394-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Centralize handling of interrupts from the userspace APIC
in kvm_cpu_has_extint and kvm_cpu_get_extint, since
userspace APIC interrupts are handled more or less the
same as ExtINTs are with split irqchip. This removes
duplicated code from kvm_cpu_has_injectable_intr and
kvm_cpu_has_interrupt, and makes the code more similar
between kvm_cpu_has_{extint,interrupt} on one side
and kvm_cpu_get_{extint,interrupt} on the other.
Cc: stable@vger.kernel.org
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmx_apic_init_signal_blocked is buggy in that it returns true
even in VMX non-root mode. In non-root mode, however, INITs
are not latched, they just cause a vmexit. Previously,
KVM was waiting for them to be processed when kvm_apic_accept_events
and in the meanwhile it ate the SIPIs that the processor received.
However, in order to implement the wait-for-SIPI activity state,
KVM will have to process KVM_APIC_SIPI in vmx_check_nested_events,
and it will not be possible anymore to disregard SIPIs in non-root
mode as the code is currently doing.
By calling kvm_x86_ops.nested_ops->check_events, we can force a vmexit
(with the side-effect of latching INITs) before incorrectly injecting
an INIT or SIPI in a guest, and therefore vmx_apic_init_signal_blocked
can do the right thing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On successful nested VM-Enter, check for pending interrupts and convert
the highest priority interrupt to a pending posted interrupt if it
matches L2's notification vector. If the vCPU receives a notification
interrupt before nested VM-Enter (assuming L1 disables IRQs before doing
VM-Enter), the pending interrupt (for L1) should be recognized and
processed as a posted interrupt when interrupts become unblocked after
VM-Enter to L2.
This fixes a bug where L1/L2 will get stuck in an infinite loop if L1 is
trying to inject an interrupt into L2 by setting the appropriate bit in
L2's PIR and sending a self-IPI prior to VM-Enter (as opposed to KVM's
method of manually moving the vector from PIR->vIRR/RVI). KVM will
observe the IPI while the vCPU is in L1 context and so won't immediately
morph it to a posted interrupt for L2. The pending interrupt will be
seen by vmx_check_nested_events(), cause KVM to force an immediate exit
after nested VM-Enter, and eventually be reflected to L1 as a VM-Exit.
After handling the VM-Exit, L1 will see that L2 has a pending interrupt
in PIR, send another IPI, and repeat until L2 is killed.
Note, posted interrupts require virtual interrupt deliveriy, and virtual
interrupt delivery requires exit-on-interrupt, ergo interrupts will be
unconditionally unmasked on VM-Enter if posted interrupts are enabled.
Fixes: 705699a139 ("KVM: nVMX: Enable nested posted interrupt processing")
Cc: stable@vger.kernel.org
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200812175129.12172-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All the checks in lapic_timer_int_injected(), __kvm_wait_lapic_expire(), and
these function calls waste cpu cycles when the timer mode is not tscdeadline.
We can observe ~1.3% world switch time overhead by kvm-unit-tests/vmexit.flat
vmcall testing on AMD server. This patch reduces the world switch latency
caused by timer_advance_ns feature when the timer mode is not tscdeadline by
simpling move the check against apic->lapic_timer.expired_tscdeadline much
earlier.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1599731444-3525-7-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kick after setting KVM_REQ_PENDING_TIMER is used to handle the timer
fires on a different pCPU which vCPU is running on. This kick costs about
1000 clock cycles and we don't need this when injecting already-expired
timer or when using the VMX preemption timer because
kvm_lapic_expired_hv_timer() is called from the target vCPU.
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1599731444-3525-6-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check apic_lvtt_tscdeadline() mode directly instead of apic_lvtt_oneshot()
and apic_lvtt_period() to guarantee the timer is in tsc-deadline mode when
wrmsr MSR_IA32_TSCDEADLINE.
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1599731444-3525-3-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return 0 when getting the tscdeadline timer if the lapic is hw disabled.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1599731444-3525-2-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is missing apic map recalculation after updating DFR, if it is
INIT RESET, in x2apic mode, local apic is software enabled before.
This patch fix it by introducing the function kvm_apic_set_dfr() to
be called in INIT RESET handling path.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1597827327-25055-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86:
* Report last CPU for debugging
* Emulate smaller MAXPHYADDR in the guest than in the host
* .noinstr and tracing fixes from Thomas
* nested SVM page table switching optimization and fixes
Generic:
* Unify shadow MMU cache data structures across architectures
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl8pC+oUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNcOwgAjomqtEqQNlp7DdZT7VyyklzbxX1/
ud7v+oOJ8K4sFlf64lSthjPo3N9rzZCcw+yOXmuyuITngXOGc3tzIwXpCzpLtuQ1
WO1Ql3B/2dCi3lP5OMmsO1UAZqy9pKLg1dfeYUPk48P5+p7d/NPmk+Em5kIYzKm5
JsaHfCp2EEXomwmljNJ8PQ1vTjIQSSzlgYUBZxmCkaaX7zbEUMtxAQCStHmt8B84
33LczwXBm3viSWrzsoBV37I70+tseugiSGsCfUyupXOvq55d6D9FCqtCb45Hn4Vh
Ik8ggKdalsk/reiGEwNw1/3nr6mRMkHSbl+Mhc4waOIFf9dn0urgQgOaDg==
=YVx0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"s390:
- implement diag318
x86:
- Report last CPU for debugging
- Emulate smaller MAXPHYADDR in the guest than in the host
- .noinstr and tracing fixes from Thomas
- nested SVM page table switching optimization and fixes
Generic:
- Unify shadow MMU cache data structures across architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
KVM: SVM: Fix sev_pin_memory() error handling
KVM: LAPIC: Set the TDCR settable bits
KVM: x86: Specify max TDP level via kvm_configure_mmu()
KVM: x86/mmu: Rename max_page_level to max_huge_page_level
KVM: x86: Dynamically calculate TDP level from max level and MAXPHYADDR
KVM: VXM: Remove temporary WARN on expected vs. actual EPTP level mismatch
KVM: x86: Pull the PGD's level from the MMU instead of recalculating it
KVM: VMX: Make vmx_load_mmu_pgd() static
KVM: x86/mmu: Add separate helper for shadow NPT root page role calc
KVM: VMX: Drop a duplicate declaration of construct_eptp()
KVM: nSVM: Correctly set the shadow NPT root level in its MMU role
KVM: Using macros instead of magic values
MIPS: KVM: Fix build error caused by 'kvm_run' cleanup
KVM: nSVM: remove nonsensical EXITINFO1 adjustment on nested NPF
KVM: x86: Add a capability for GUEST_MAXPHYADDR < HOST_MAXPHYADDR support
KVM: VMX: optimize #PF injection when MAXPHYADDR does not match
KVM: VMX: Add guest physical address check in EPT violation and misconfig
KVM: VMX: introduce vmx_need_pf_intercept
KVM: x86: update exception bitmap on CPUID changes
KVM: x86: rename update_bp_intercept to update_exception_bitmap
...
It is a little different between Intel and AMD, Intel's bit 2
is 0 and AMD is reserved. On bare-metal, Intel will refuse to set
APIC_TDCR once bits except 0, 1, 3 are setting, however, AMD will
accept bits 0, 1, 3 and ignore other bits setting as patch does.
Before the patch, we can get back anything what we set to the
APIC_TDCR, this patch improves it.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1596165141-28874-2-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prevent setting the tscdeadline timer if the lapic is hw disabled.
Fixes: bce87cce88 (KVM: x86: consolidate different ways to test for in-kernel LAPIC)
Cc: <stable@vger.kernel.org>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1596165141-28874-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of using magic values, use macros.
Signed-off-by: Haiwei Li <lihaiwei@tencent.com>
Message-Id: <4c072161-80dd-b7ed-7adb-02acccaa0701@gmail.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Beside called in kvm_vcpu_ioctl_set_cpuid*(), kvm_update_cpuid() is also
called 5 places else in x86.c and 1 place else in lapic.c. All those 6
places only need the part of updating guest CPUIDs (OSXSAVE, OSPKE, APIC,
KVM_FEATURE_PV_UNHALT, ...) based on the runtime vcpu state, so extract
them as a separate kvm_update_cpuid_runtime().
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200709043426.92712-3-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only code cleanup and no functional change.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200708065054.19713-8-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following race can cause lost map update events:
cpu1 cpu2
apic_map_dirty = true
------------------------------------------------------------
kvm_recalculate_apic_map:
pass check
mutex_lock(&kvm->arch.apic_map_lock);
if (!kvm->arch.apic_map_dirty)
and in process of updating map
-------------------------------------------------------------
other calls to
apic_map_dirty = true might be too late for affected cpu
-------------------------------------------------------------
apic_map_dirty = false
-------------------------------------------------------------
kvm_recalculate_apic_map:
bail out on
if (!kvm->arch.apic_map_dirty)
To fix it, record the beginning of an update of the APIC map in
apic_map_dirty. If another APIC map change switches apic_map_dirty
back to DIRTY during the update, kvm_recalculate_apic_map should not
make it CLEAN, and the other caller will go through the slow path.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guest fails to online hotplugged CPU with error
smpboot: do_boot_cpu failed(-1) to wakeup CPU#4
It's caused by the fact that kvm_apic_set_state(), which used to call
recalculate_apic_map() unconditionally and pulled hotplugged CPU into
apic map, is updating map conditionally on state changes. In this case
the APIC map is not considered dirty and the is not updated.
Fix the issue by forcing unconditional update from kvm_apic_set_state(),
like it used to be.
Fixes: 4abaffce4d ("KVM: LAPIC: Recalculate apic map in batch")
Cc: stable@vger.kernel.org
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200622160830.426022-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pic_in_kernel(), ioapic_in_kernel() and irqchip_kernel() have the
same implementation.
Signed-off-by: Peng Hao <richard.peng@oppo.com>
Message-Id: <HKAPR02MB4291D5926EA10B8BFE9EA0D3E0B70@HKAPR02MB4291.apcprd02.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements a fast path for emulation of writes to the TSCDEADLINE
MSR. Besides shortcutting various housekeeping tasks in the vCPU loop,
the fast path can also deliver the timer interrupt directly without going
through KVM_REQ_PENDING_TIMER because it runs in vCPU context.
Tested-by: Haiwei Li <lihaiwei@tencent.com>
Cc: Haiwei Li <lihaiwei@tencent.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1588055009-12677-7-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the ad hoc test in vmx_set_hv_timer with a test in the caller,
start_hv_timer. This test is not Intel-specific and would be duplicated
when introducing the fast path for the TSC deadline MSR.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The use of any sort of waitqueue (simple or regular) for
wait/waking vcpus has always been an overkill and semantically
wrong. Because this is per-vcpu (which is blocked) there is
only ever a single waiting vcpu, thus no need for any sort of
queue.
As such, make use of the rcuwait primitive, with the following
considerations:
- rcuwait already provides the proper barriers that serialize
concurrent waiter and waker.
- Task wakeup is done in rcu read critical region, with a
stable task pointer.
- Because there is no concurrency among waiters, we need
not worry about rcuwait_wait_event() calls corrupting
the wait->task. As a consequence, this saves the locking
done in swait when modifying the queue. This also applies
to per-vcore wait for powerpc kvm-hv.
The x86 tscdeadline_latency test mentioned in 8577370fb0
("KVM: Use simple waitqueue for vcpu->wq") shows that, on avg,
latency is reduced by around 15-20% with this change.
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-mips@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Message-Id: <20200424054837.5138-6-dave@stgolabs.net>
[Avoid extra logic changes. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_vcpu_ioctl_get_lapic (implements KVM_GET_LAPIC ioctl) does a bulk copy
of the LAPIC registers but must take into account that the one-shot and
periodic timer current count register is computed upon reads and is not
present in register state. When restoring LAPIC state (e.g. after
migration), restart timers from their their current count values at time of
save.
Note: When a one-shot timer expires, the code in arch/x86/kvm/lapic.c does
not zero the value of the LAPIC initial count register (emulating HW
behavior). If no other timer is run and pending prior to a subsequent
KVM_GET_LAPIC call, the returned register set will include the expired
one-shot initial count. On a subsequent KVM_SET_LAPIC call the code will
see a non-zero initial count and start a new one-shot timer using the
expired timer's count. This is a prior existing bug and will be addressed
in a separate patch. Thanks to jmattson@google.com for this find.
Signed-off-by: Peter Shier <pshier@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <20181010225653.238911-1-pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Except destination shorthand, a destination value 0xffffffff is used to
broadcast interrupts, let's also filter out this for single target IPI
fastpath.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1585815626-28370-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* GICv4.1 support
* 32bit host removal
PPC:
* secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
* allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
* New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require bulk
modification of the page tables.
* Initial work on making nested SVM event injection more similar to VMX,
and less buggy.
* Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in function
names which occasionally means eptp, KVM too has standardized on "pgd".
* A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
* Some removal of pointer chasing from kvm_x86_ops, which will also be
switched to static calls as soon as they are available.
* New Tigerlake CPUID features.
* More bugfixes, optimizations and cleanups.
Generic:
* selftests: cleanups, new MMU notifier stress test, steal-time test
* CSV output for kvm_stat.
KVM/MIPS has been broken since 5.5, it does not compile due to a patch committed
by MIPS maintainers. I had already prepared a fix, but the MIPS maintainers
prefer to fix it in generic code rather than KVM so they are taking care of it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6GOnIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfxwf/ZKLZiRoaovXCOG71M/eHtQb8ZIqU
3MPy+On3eC5Sk/aBxWUL9EFZsbYG6kYdbZ1VOvG9XPBoLlnkDSm/IR0kaELHtnjj
oGVda/tvGn46Ne39y8xBptmb91WDcWH0vFthT/CwlMxAw3xjr+gG7Qyo+8F2CW6m
SSSuLiHSBnyO1cQKruBTHZ8qnR8LlnfXEqtd6Y4LFLic0LbLIoIdRcT3wjQrcZrm
Djd7wbTEYZjUfoqZ72ekwEDUsONcDLDSKcguDO9pSMSCGhpxCVT5Vy68KRpoIMs2
nzNWDKjvqQo5zb2+GWxJgkd12Hv+n7PCXZMbVrWBu1pQsewUns9m4mkpGw==
=6fGt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- GICv4.1 support
- 32bit host removal
PPC:
- secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
- allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
- New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require
bulk modification of the page tables.
- Initial work on making nested SVM event injection more similar to
VMX, and less buggy.
- Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in
function names which occasionally means eptp, KVM too has
standardized on "pgd".
- A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
- Some removal of pointer chasing from kvm_x86_ops, which will also
be switched to static calls as soon as they are available.
- New Tigerlake CPUID features.
- More bugfixes, optimizations and cleanups.
Generic:
- selftests: cleanups, new MMU notifier stress test, steal-time test
- CSV output for kvm_stat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
x86/kvm: fix a missing-prototypes "vmread_error"
KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
KVM: VMX: Add a trampoline to fix VMREAD error handling
KVM: SVM: Annotate svm_x86_ops as __initdata
KVM: VMX: Annotate vmx_x86_ops as __initdata
KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
KVM: VMX: Configure runtime hooks using vmx_x86_ops
KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
KVM: x86: Move init-only kvm_x86_ops to separate struct
KVM: Pass kvm_init()'s opaque param to additional arch funcs
s390/gmap: return proper error code on ksm unsharing
KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
KVM: Fix out of range accesses to memslots
KVM: X86: Micro-optimize IPI fastpath delay
KVM: X86: Delay read msr data iff writes ICR MSR
KVM: PPC: Book3S HV: Add a capability for enabling secure guests
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
...
Replace the kvm_x86_ops pointer in common x86 with an instance of the
struct to save one pointer dereference when invoking functions. Copy the
struct by value to set the ops during kvm_init().
Arbitrarily use kvm_x86_ops.hardware_enable to track whether or not the
ops have been initialized, i.e. a vendor KVM module has been loaded.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-7-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
