Unlike previous method that tries to commit transaction inside
qgroup_reserve(), this time we will try to commit transaction using
fs_info->transaction_kthread to avoid nested transaction and no need to
worry about locking context.
Since it's an asynchronous function call and we won't wait for
transaction commit, unlike previous method, we must call it before we
hit the qgroup limit.
So this patch will use the ratio and size of qgroup meta_pertrans
reservation as indicator to check if we should trigger a transaction
commit. (meta_prealloc won't be cleaned in transaction committ, it's
useless anyway)
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove GPL boilerplate text (long, short, one-line) and keep the rest,
ie. personal, company or original source copyright statements. Add the
SPDX header.
Unify the include protection macros to match the file names.
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the userspace transaction ioctls have been removed,
TRANS_USERSPACE is no longer used hence we can remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The reason why io_bgs can be modified without holding any lock is
non-obvious. Document it and reference that documentation from the
respective call sites.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 0e8c36a9fd ("Btrfs: fix lots of orphan inodes when the space
is not enough") changed the way transaction reservation is made in
btrfs_evict_node and as a result this function became unused. This has
been the status quo for 5 years in which time no one noticed, so I'd
say it's safe to assume it's unlikely it will ever be used again.
Historical note: there were more attempts to remove the function, the
reasoning was missing and only based on some static analysis tool
reports. Other reason for rejection was that there seemed to be
connection to BTRFS_RESERVE_FLUSH_LIMIT and that would need to be
removeed to. This was not correct so removing the function is all we can
do.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
[ add the note ]
Signed-off-by: David Sterba <dsterba@suse.com>
There are now 20 bytes of holes, we can reduce that to 4 by minor
changes. Moving 'aborted' to the status and flags is also more logical,
similar for num_dirty_bgs. The size goes from 432 to 416.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Recent updates to the structure left some holes, reorder the types so
the packing is tight. The size goes from 112 to 104 on 64bit.
Signed-off-by: David Sterba <dsterba@suse.com>
The use_count is a reference counter, we can use the refcount_t type,
though we don't use the atomicity. This is not a performance critical
code and we could catch the underflows. The type is changed from long,
but the number of references will fit an int.
Signed-off-by: David Sterba <dsterba@suse.com>
Last user was removed in a monster commit a22285a6a3
("Btrfs: Integrate metadata reservation with start_transaction") in
2010.
Signed-off-by: David Sterba <dsterba@suse.com>
The semantics of adding_csums matches bool, 'short' was most likely used
to save space in a698d0755a ("Btrfs: add a type field for the
transaction handle").
Signed-off-by: David Sterba <dsterba@suse.com>
The members have been effectively unused since "Btrfs: rework qgroup
accounting" (fcebe4562d), there's no substitute for
assert_qgroups_uptodate so it's removed as well.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now we only use the root parameter to print the root objectid in
a tracepoint. We can use the root parameter from the transaction
handle for that. It's also used to join the transaction with
async commits, so we remove the comment that it's just for checking.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_write_and_wait_marked_extents and btrfs_sync_log both call
btrfs_wait_marked_extents, which provides a core loop and then handles
errors differently based on whether it's it's a log root or not.
This means that btrfs_write_and_wait_marked_extents needs to take a root
because btrfs_wait_marked_extents requires one, even though it's only
used to determine whether the root is a log root. The log root code
won't ever call into the transaction commit code using a log root, so we
can factor out the core loop and provide the error handling appropriate
to each waiter in new routines. This allows us to eventually remove
the root argument from btrfs_commit_transaction, and as a result,
btrfs_end_transaction.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are loads of functions in btrfs that accept a root parameter
but only use it to obtain an fs_info pointer. Let's convert those to
just accept an fs_info pointer directly.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For many printks, we want to know which file system issued the message.
This patch converts most pr_* calls to use the btrfs_* versions instead.
In some cases, this means adding plumbing to allow call sites access to
an fs_info pointer.
fs/btrfs/check-integrity.c is left alone for another day.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_trans_handle->root is documented as for use for confirming
that the root passed in to start the transaction is the same as the
one ending it. It's used in several places when an fs_info pointer
is needed, so let's just add an fs_info pointer directly. Eventually,
the root pointer can be removed.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The test for !trans->blocks_used in btrfs_abort_transaction is
insufficient to determine whether it's safe to drop the transaction
handle on the floor. btrfs_cow_block, informed by should_cow_block,
can return blocks that have already been CoW'd in the current
transaction. trans->blocks_used is only incremented for new block
allocations. If an operation overlaps the blocks in the current
transaction entirely and must abort the transaction, we'll happily
let it clean up the trans handle even though it may have modified
the blocks and will commit an incomplete operation.
In the long-term, I'd like to do closer tracking of when the fs
is actually modified so we can still recover as gracefully as possible,
but that approach will need some discussion. In the short term,
since this is the only code using trans->blocks_used, let's just
switch it to a bool indicating whether any blocks were used and set
it when should_cow_block returns false.
Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can also preallocate btrfs_path that's used during pending snapshot
creation and avoid another late ENOMEM failure.
Signed-off-by: David Sterba <dsterba@suse.com>
The actual snapshot creation is delayed until transaction commit. If we
cannot get enough memory for the root item there, we have to fail the
whole transaction commit which is bad. So we'll allocate the memory at
the ioctl call and pass it along with the pending_snapshot struct. The
potential ENOMEM will be returned to the caller of snapshot ioctl.
Signed-off-by: David Sterba <dsterba@suse.com>
As of my previous change titled "Btrfs: fix scrub preventing unused block
groups from being deleted", the following warning at
extent-tree.c:btrfs_delete_unused_bgs() can be hit when we mount the a
filesysten with "-o discard":
10263 void btrfs_delete_unused_bgs(struct btrfs_fs_info *fs_info)
10264 {
(...)
10405 if (trimming) {
10406 WARN_ON(!list_empty(&block_group->bg_list));
10407 spin_lock(&trans->transaction->deleted_bgs_lock);
10408 list_move(&block_group->bg_list,
10409 &trans->transaction->deleted_bgs);
10410 spin_unlock(&trans->transaction->deleted_bgs_lock);
10411 btrfs_get_block_group(block_group);
10412 }
(...)
This happens because scrub can now add back the block group to the list of
unused block groups (fs_info->unused_bgs). This is dangerous because we
are moving the block group from the unused block groups list to the list
of deleted block groups without holding the lock that protects the source
list (fs_info->unused_bgs_lock).
The following diagram illustrates how this happens:
CPU 1 CPU 2
cleaner_kthread()
btrfs_delete_unused_bgs()
sees bg X in list
fs_info->unused_bgs
deletes bg X from list
fs_info->unused_bgs
scrub_enumerate_chunks()
searches device tree using
its commit root
finds device extent for
block group X
gets block group X from the tree
fs_info->block_group_cache_tree
(via btrfs_lookup_block_group())
sets bg X to RO (again)
scrub_chunk(bg X)
sets bg X back to RW mode
adds bg X to the list
fs_info->unused_bgs again,
since it's still unused and
currently not in that list
sets bg X to RO mode
btrfs_remove_chunk(bg X)
--> discard is enabled and bg X
is in the fs_info->unused_bgs
list again so the warning is
triggered
--> we move it from that list into
the transaction's delete_bgs
list, but we can have another
task currently manipulating
the first list (fs_info->unused_bgs)
Fix this by using the same lock (fs_info->unused_bgs_lock) to protect both
the list of unused block groups and the list of deleted block groups. This
makes it safe and there's not much worry for more lock contention, as this
lock is seldom used and only the cleaner kthread adds elements to the list
of deleted block groups. The warning goes away too, as this was previously
an impossible case (and would have been better a BUG_ON/ASSERT) but it's
not impossible anymore.
Reproduced with fstest btrfs/073 (using MOUNT_OPTIONS="-o discard").
Signed-off-by: Filipe Manana <fdmanana@suse.com>
It's possible to reach a state where the cleaner kthread isn't able to
start a transaction to delete an unused block group due to lack of enough
free metadata space and due to lack of unallocated device space to allocate
a new metadata block group as well. If this happens try to use space from
the global block group reserve just like we do for unlink operations, so
that we don't reach a permanent state where starting a transaction for
filesystem operations (file creation, renames, etc) keeps failing with
-ENOSPC. Such an unfortunate state was observed on a machine where over
a dozen unused data block groups existed and the cleaner kthread was
failing to delete them due to ENOSPC error when attempting to start a
transaction, and even running balance with a -dusage=0 filter failed with
ENOSPC as well. Also unmounting and mounting again the filesystem didn't
help. Allowing the cleaner kthread to use the global block reserve to
delete the unused data block groups fixed the problem.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we hit ENOSPC when setting up a space cache don't bother setting up any of
the other space cache's in this transaction, it'll just induce unnecessary
latency. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
I want to set some per transaction flags, so instead of adding yet another int
lets just convert the current two int indicators to flags and add a flags field
for future use. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We have a mechanism to make sure we don't lose updates for ordered extents that
were logged in the transaction that is currently running. We add the ordered
extent to a transaction list and then the transaction waits on all the ordered
extents in that list. However are substantially large file systems this list
can be extremely large, and can give us soft lockups, since the ordered extents
don't remove themselves from the list when they do complete.
To fix this we simply add a counter to the transaction that is incremented any
time we have a logged extent that needs to be completed in the current
transaction. Then when the ordered extent finally completes it decrements the
per transaction counter and wakes up the transaction if we are the last ones.
This will eliminate the softlockup. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
As we have the new metadata reservation functions, use them to replace
the old btrfs_qgroup_reserve() call for metadata.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The value of num_items that start_transaction() ultimately
always takes is a small one, so a 64 bit integer is overkill.
Also change num_items for btrfs_start_transaction() and
btrfs_start_transaction_lflush() as well.
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef ran into a deadlock while a transaction handle was finalizing the
creation of its block groups, which produced the following trace:
[260445.593112] fio D ffff88022a9df468 0 8924 4518 0x00000084
[260445.593119] ffff88022a9df468 ffffffff81c134c0 ffff880429693c00 ffff88022a9df488
[260445.593126] ffff88022a9e0000 ffff8803490d7b00 ffff8803490d7b18 ffff88022a9df4b0
[260445.593132] ffff8803490d7af8 ffff88022a9df488 ffffffff8175a437 ffff8803490d7b00
[260445.593137] Call Trace:
[260445.593145] [<ffffffff8175a437>] schedule+0x37/0x80
[260445.593189] [<ffffffffa0850f37>] btrfs_tree_lock+0xa7/0x1f0 [btrfs]
[260445.593197] [<ffffffff810db7c0>] ? prepare_to_wait_event+0xf0/0xf0
[260445.593225] [<ffffffffa07eac44>] btrfs_lock_root_node+0x34/0x50 [btrfs]
[260445.593253] [<ffffffffa07eff6b>] btrfs_search_slot+0x88b/0xa00 [btrfs]
[260445.593295] [<ffffffffa08389df>] ? free_extent_buffer+0x4f/0x90 [btrfs]
[260445.593324] [<ffffffffa07f1a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs]
[260445.593351] [<ffffffffa07ea94a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs]
[260445.593394] [<ffffffffa08403b9>] btrfs_finish_chunk_alloc+0x1c9/0x570 [btrfs]
[260445.593427] [<ffffffffa08002ab>] btrfs_create_pending_block_groups+0x11b/0x200 [btrfs]
[260445.593459] [<ffffffffa0800964>] do_chunk_alloc+0x2a4/0x2e0 [btrfs]
[260445.593491] [<ffffffffa0803815>] find_free_extent+0xa55/0xd90 [btrfs]
[260445.593524] [<ffffffffa0803c22>] btrfs_reserve_extent+0xd2/0x220 [btrfs]
[260445.593532] [<ffffffff8119fe5d>] ? account_page_dirtied+0xdd/0x170
[260445.593564] [<ffffffffa0803e78>] btrfs_alloc_tree_block+0x108/0x4a0 [btrfs]
[260445.593597] [<ffffffffa080c9de>] ? btree_set_page_dirty+0xe/0x10 [btrfs]
[260445.593626] [<ffffffffa07eb5cd>] __btrfs_cow_block+0x12d/0x5b0 [btrfs]
[260445.593654] [<ffffffffa07ebbff>] btrfs_cow_block+0x11f/0x1c0 [btrfs]
[260445.593682] [<ffffffffa07ef8c7>] btrfs_search_slot+0x1e7/0xa00 [btrfs]
[260445.593724] [<ffffffffa08389df>] ? free_extent_buffer+0x4f/0x90 [btrfs]
[260445.593752] [<ffffffffa07f1a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs]
[260445.593830] [<ffffffffa07ea94a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs]
[260445.593905] [<ffffffffa08403b9>] btrfs_finish_chunk_alloc+0x1c9/0x570 [btrfs]
[260445.593946] [<ffffffffa08002ab>] btrfs_create_pending_block_groups+0x11b/0x200 [btrfs]
[260445.593990] [<ffffffffa0815798>] btrfs_commit_transaction+0xa8/0xb40 [btrfs]
[260445.594042] [<ffffffffa085abcd>] ? btrfs_log_dentry_safe+0x6d/0x80 [btrfs]
[260445.594089] [<ffffffffa082bc84>] btrfs_sync_file+0x294/0x350 [btrfs]
[260445.594115] [<ffffffff8123e29b>] vfs_fsync_range+0x3b/0xa0
[260445.594133] [<ffffffff81023891>] ? syscall_trace_enter_phase1+0x131/0x180
[260445.594149] [<ffffffff8123e35d>] do_fsync+0x3d/0x70
[260445.594169] [<ffffffff81023bb8>] ? syscall_trace_leave+0xb8/0x110
[260445.594187] [<ffffffff8123e600>] SyS_fsync+0x10/0x20
[260445.594204] [<ffffffff8175de6e>] entry_SYSCALL_64_fastpath+0x12/0x71
This happened because the same transaction handle created a large number
of block groups and while finalizing their creation (inserting new items
and updating existing items in the chunk and device trees) a new metadata
extent had to be allocated and no free space was found in the current
metadata block groups, which made find_free_extent() attempt to allocate
a new block group via do_chunk_alloc(). However at do_chunk_alloc() we
ended up allocating a new system chunk too and exceeded the threshold
of 2Mb of reserved chunk bytes, which makes do_chunk_alloc() enter the
final part of block group creation again (at
btrfs_create_pending_block_groups()) and attempt to lock again the root
of the chunk tree when it's already write locked by the same task.
Similarly we can deadlock on extent tree nodes/leafs if while we are
running delayed references we end up creating a new metadata block group
in order to allocate a new node/leaf for the extent tree (as part of
a CoW operation or growing the tree), as btrfs_create_pending_block_groups
inserts items into the extent tree as well. In this case we get the
following trace:
[14242.773581] fio D ffff880428ca3418 0 3615 3100 0x00000084
[14242.773588] ffff880428ca3418 ffff88042d66b000 ffff88042a03c800 ffff880428ca3438
[14242.773594] ffff880428ca4000 ffff8803e4b20190 ffff8803e4b201a8 ffff880428ca3460
[14242.773600] ffff8803e4b20188 ffff880428ca3438 ffffffff8175a437 ffff8803e4b20190
[14242.773606] Call Trace:
[14242.773613] [<ffffffff8175a437>] schedule+0x37/0x80
[14242.773656] [<ffffffffa057ff07>] btrfs_tree_lock+0xa7/0x1f0 [btrfs]
[14242.773664] [<ffffffff810db7c0>] ? prepare_to_wait_event+0xf0/0xf0
[14242.773692] [<ffffffffa0519c44>] btrfs_lock_root_node+0x34/0x50 [btrfs]
[14242.773720] [<ffffffffa051ef6b>] btrfs_search_slot+0x88b/0xa00 [btrfs]
[14242.773750] [<ffffffffa0520a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs]
[14242.773758] [<ffffffff811ef4a2>] ? kmem_cache_alloc+0x1d2/0x200
[14242.773786] [<ffffffffa0520ad1>] btrfs_insert_item+0x71/0xf0 [btrfs]
[14242.773818] [<ffffffffa052f292>] btrfs_create_pending_block_groups+0x102/0x200 [btrfs]
[14242.773850] [<ffffffffa052f96e>] do_chunk_alloc+0x2ae/0x2f0 [btrfs]
[14242.773934] [<ffffffffa0532825>] find_free_extent+0xa55/0xd90 [btrfs]
[14242.773998] [<ffffffffa0532c22>] btrfs_reserve_extent+0xc2/0x1d0 [btrfs]
[14242.774041] [<ffffffffa0532e38>] btrfs_alloc_tree_block+0x108/0x4a0 [btrfs]
[14242.774078] [<ffffffffa051a5cd>] __btrfs_cow_block+0x12d/0x5b0 [btrfs]
[14242.774118] [<ffffffffa051abff>] btrfs_cow_block+0x11f/0x1c0 [btrfs]
[14242.774155] [<ffffffffa051e8c7>] btrfs_search_slot+0x1e7/0xa00 [btrfs]
[14242.774194] [<ffffffffa0528021>] ? __btrfs_free_extent.isra.70+0x2e1/0xcb0 [btrfs]
[14242.774235] [<ffffffffa0520a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs]
[14242.774274] [<ffffffffa051994a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs]
[14242.774318] [<ffffffffa052c433>] __btrfs_run_delayed_refs+0xbb3/0x1020 [btrfs]
[14242.774358] [<ffffffffa052f404>] btrfs_run_delayed_refs.part.78+0x74/0x280 [btrfs]
[14242.774391] [<ffffffffa052f627>] btrfs_run_delayed_refs+0x17/0x20 [btrfs]
[14242.774432] [<ffffffffa05be236>] commit_cowonly_roots+0x8d/0x2bd [btrfs]
[14242.774474] [<ffffffffa059d07f>] ? __btrfs_run_delayed_items+0x1cf/0x210 [btrfs]
[14242.774516] [<ffffffffa05adac3>] ? btrfs_qgroup_account_extents+0x83/0x130 [btrfs]
[14242.774558] [<ffffffffa0544c40>] btrfs_commit_transaction+0x590/0xb40 [btrfs]
[14242.774599] [<ffffffffa0589b9d>] ? btrfs_log_dentry_safe+0x6d/0x80 [btrfs]
[14242.774642] [<ffffffffa055ac54>] btrfs_sync_file+0x294/0x350 [btrfs]
[14242.774650] [<ffffffff8123e29b>] vfs_fsync_range+0x3b/0xa0
[14242.774657] [<ffffffff81023891>] ? syscall_trace_enter_phase1+0x131/0x180
[14242.774663] [<ffffffff8123e35d>] do_fsync+0x3d/0x70
[14242.774669] [<ffffffff81023bb8>] ? syscall_trace_leave+0xb8/0x110
[14242.774675] [<ffffffff8123e600>] SyS_fsync+0x10/0x20
[14242.774681] [<ffffffff8175de6e>] entry_SYSCALL_64_fastpath+0x12/0x71
Fix this by never recursing into the finalization phase of block group
creation and making sure we never trigger the finalization of block group
creation while running delayed references.
Reported-by: Josef Bacik <jbacik@fb.com>
Fixes: 00d80e342c ("Btrfs: fix quick exhaustion of the system array in the superblock")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When dropping a snapshot we need to account for the qgroup changes. If we drop
the snapshot in all one go then the backref code will fail to find blocks from
the snapshot we dropped since it won't be able to find the root in the fs root
cache. This can lead to us failing to find refs from other roots that pointed
at blocks in the now deleted root. To handle this we need to not remove the fs
roots from the cache until after we process the qgroup operations. Do this by
adding dropped roots to a list on the transaction, and letting the transaction
remove the roots at the same time it drops the commit roots. This will keep all
of the backref searching code in sync properly, and fixes a problem Mark was
seeing with snapshot delete and qgroups. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we clear the dirty bits in btrfs_delete_unused_bgs for extents
in the empty block group, it results in btrfs_finish_extent_commit being
unable to discard the freed extents.
The block group removal patch added an alternate path to forget extents
other than btrfs_finish_extent_commit. As a result, any extents that
would be freed when the block group is removed aren't discarded. In my
test run, with a large copy of mixed sized files followed by removal, it
left nearly 2/3 of extents undiscarded.
To clean up the block groups, we add the removed block group onto a list
that will be discarded after transaction commit.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This is used by later qgroup fix patches for snapshot.
As current snapshot accounting is done by btrfs_qgroup_inherit(), but
new extent oriented quota mechanism will account extent from
btrfs_copy_root() and other snapshot things, causing wrong result.
So add this ability to handle snapshot accounting.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
While creating a block group, we often end up getting ENOSPC while updating
the chunk tree, which leads to a transaction abortion that produces a trace
like the following:
[30670.116368] WARNING: CPU: 4 PID: 20735 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x106 [btrfs]()
[30670.117777] BTRFS: Transaction aborted (error -28)
(...)
[30670.163567] Call Trace:
[30670.163906] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b
[30670.164522] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad
[30670.165171] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb
[30670.166323] [<ffffffffa035daa7>] ? __btrfs_abort_transaction+0x52/0x106 [btrfs]
[30670.167213] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48
[30670.167862] [<ffffffffa035daa7>] __btrfs_abort_transaction+0x52/0x106 [btrfs]
[30670.169116] [<ffffffffa03743d7>] btrfs_create_pending_block_groups+0x101/0x130 [btrfs]
[30670.170593] [<ffffffffa038426a>] __btrfs_end_transaction+0x84/0x366 [btrfs]
[30670.171960] [<ffffffffa038455c>] btrfs_end_transaction+0x10/0x12 [btrfs]
[30670.174649] [<ffffffffa036eb6b>] btrfs_check_data_free_space+0x11f/0x27c [btrfs]
[30670.176092] [<ffffffffa039450d>] btrfs_fallocate+0x7c8/0xb96 [btrfs]
[30670.177218] [<ffffffff812459f2>] ? __this_cpu_preempt_check+0x13/0x15
[30670.178622] [<ffffffff81152447>] vfs_fallocate+0x14c/0x1de
[30670.179642] [<ffffffff8116b915>] ? __fget_light+0x2d/0x4f
[30670.180692] [<ffffffff81152863>] SyS_fallocate+0x47/0x62
[30670.186737] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17
[30670.187792] ---[ end trace 0373e6b491c4a8cc ]---
This is because we don't do proper space reservation for the chunk block
reserve when we have multiple tasks allocating chunks in parallel.
So block group creation has 2 phases, and the first phase essentially
checks if there is enough space in the system space_info, allocating a
new system chunk if there isn't, while the second phase updates the
device, extent and chunk trees. However, because the updates to the
chunk tree happen in the second phase, if we have N tasks, each with
its own transaction handle, allocating new chunks in parallel and if
there is only enough space in the system space_info to allocate M chunks,
where M < N, none of the tasks ends up allocating a new system chunk in
the first phase and N - M tasks will get -ENOSPC when attempting to
update the chunk tree in phase 2 if they need to COW any nodes/leafs
from the chunk tree.
Fix this by doing proper reservation in the chunk block reserve.
The issue could be reproduced by running fstests generic/038 in a loop,
which eventually triggered the problem.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We loop through all of the dirty block groups during commit and write
the free space cache. In order to make sure the cache is currect, we do
this while no other writers are allowed in the commit.
If a large number of block groups are dirty, this can introduce long
stalls during the final stages of the commit, which can block new procs
trying to change the filesystem.
This commit changes the block group cache writeout to take appropriate
locks and allow it to run earlier in the commit. We'll still have to
redo some of the block groups, but it means we can get most of the work
out of the way without blocking the entire FS.
Signed-off-by: Chris Mason <clm@fb.com>
We can get into inconsistency between inodes and directory entries
after fsyncing a directory. The issue is that while a directory gets
the new dentries persisted in the fsync log and replayed at mount time,
the link count of the inode that directory entries point to doesn't
get updated, staying with an incorrect link count (smaller then the
correct value). This later leads to stale file handle errors when
accessing (including attempt to delete) some of the links if all the
other ones are removed, which also implies impossibility to delete the
parent directories, since the dentries can not be removed.
Another issue is that (unlike ext3/4, xfs, f2fs, reiserfs, nilfs2),
when fsyncing a directory, new files aren't logged (their metadata and
dentries) nor any child directories. So this patch fixes this issue too,
since it has the same resolution as the incorrect inode link count issue
mentioned before.
This is very easy to reproduce, and the following excerpt from my test
case for xfstests shows how:
_scratch_mkfs >> $seqres.full 2>&1
_init_flakey
_mount_flakey
# Create our main test file and directory.
$XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" $SCRATCH_MNT/foo | _filter_xfs_io
mkdir $SCRATCH_MNT/mydir
# Make sure all metadata and data are durably persisted.
sync
# Add a hard link to 'foo' inside our test directory and fsync only the
# directory. The btrfs fsync implementation had a bug that caused the new
# directory entry to be visible after the fsync log replay but, the inode
# of our file remained with a link count of 1.
ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_2
# Add a few more links and new files.
# This is just to verify nothing breaks or gives incorrect results after the
# fsync log is replayed.
ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_3
$XFS_IO_PROG -f -c "pwrite -S 0xff 0 64K" $SCRATCH_MNT/hello | _filter_xfs_io
ln $SCRATCH_MNT/hello $SCRATCH_MNT/mydir/hello_2
# Add some subdirectories and new files and links to them. This is to verify
# that after fsyncing our top level directory 'mydir', all the subdirectories
# and their files/links are registered in the fsync log and exist after the
# fsync log is replayed.
mkdir -p $SCRATCH_MNT/mydir/x/y/z
ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/foo_y_link
ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/z/foo_z_link
touch $SCRATCH_MNT/mydir/x/y/z/qwerty
# Now fsync only our top directory.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/mydir
# And fsync now our new file named 'hello', just to verify later that it has
# the expected content and that the previous fsync on the directory 'mydir' had
# no bad influence on this fsync.
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/hello
# Simulate a crash/power loss.
_load_flakey_table $FLAKEY_DROP_WRITES
_unmount_flakey
_load_flakey_table $FLAKEY_ALLOW_WRITES
_mount_flakey
# Verify the content of our file 'foo' remains the same as before, 8192 bytes,
# all with the value 0xaa.
echo "File 'foo' content after log replay:"
od -t x1 $SCRATCH_MNT/foo
# Remove the first name of our inode. Because of the directory fsync bug, the
# inode's link count was 1 instead of 5, so removing the 'foo' name ended up
# deleting the inode and the other names became stale directory entries (still
# visible to applications). Attempting to remove or access the remaining
# dentries pointing to that inode resulted in stale file handle errors and
# made it impossible to remove the parent directories since it was impossible
# for them to become empty.
echo "file 'foo' link count after log replay: $(stat -c %h $SCRATCH_MNT/foo)"
rm -f $SCRATCH_MNT/foo
# Now verify that all files, links and directories created before fsyncing our
# directory exist after the fsync log was replayed.
[ -f $SCRATCH_MNT/mydir/foo_2 ] || echo "Link mydir/foo_2 is missing"
[ -f $SCRATCH_MNT/mydir/foo_3 ] || echo "Link mydir/foo_3 is missing"
[ -f $SCRATCH_MNT/hello ] || echo "File hello is missing"
[ -f $SCRATCH_MNT/mydir/hello_2 ] || echo "Link mydir/hello_2 is missing"
[ -f $SCRATCH_MNT/mydir/x/y/foo_y_link ] || \
echo "Link mydir/x/y/foo_y_link is missing"
[ -f $SCRATCH_MNT/mydir/x/y/z/foo_z_link ] || \
echo "Link mydir/x/y/z/foo_z_link is missing"
[ -f $SCRATCH_MNT/mydir/x/y/z/qwerty ] || \
echo "File mydir/x/y/z/qwerty is missing"
# We expect our file here to have a size of 64Kb and all the bytes having the
# value 0xff.
echo "file 'hello' content after log replay:"
od -t x1 $SCRATCH_MNT/hello
# Now remove all files/links, under our test directory 'mydir', and verify we
# can remove all the directories.
rm -f $SCRATCH_MNT/mydir/x/y/z/*
rmdir $SCRATCH_MNT/mydir/x/y/z
rm -f $SCRATCH_MNT/mydir/x/y/*
rmdir $SCRATCH_MNT/mydir/x/y
rmdir $SCRATCH_MNT/mydir/x
rm -f $SCRATCH_MNT/mydir/*
rmdir $SCRATCH_MNT/mydir
# An fsck, run by the fstests framework everytime a test finishes, also detected
# the inconsistency and printed the following error message:
#
# root 5 inode 257 errors 2001, no inode item, link count wrong
# unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref
# unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref
status=0
exit
The expected golden output for the test is:
wrote 8192/8192 bytes at offset 0
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
wrote 65536/65536 bytes at offset 0
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
File 'foo' content after log replay:
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
0020000
file 'foo' link count after log replay: 5
file 'hello' content after log replay:
0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0200000
Which is the output after this patch and when running the test against
ext3/4, xfs, f2fs, reiserfs or nilfs2. Without this patch, the test's
output is:
wrote 8192/8192 bytes at offset 0
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
wrote 65536/65536 bytes at offset 0
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
File 'foo' content after log replay:
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
0020000
file 'foo' link count after log replay: 1
Link mydir/foo_2 is missing
Link mydir/foo_3 is missing
Link mydir/x/y/foo_y_link is missing
Link mydir/x/y/z/foo_z_link is missing
File mydir/x/y/z/qwerty is missing
file 'hello' content after log replay:
0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0200000
rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y/z': No such file or directory
rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y': No such file or directory
rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x': No such file or directory
rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_2': Stale file handle
rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_3': Stale file handle
rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir': Directory not empty
Fsck, without this fix, also complains about the wrong link count:
root 5 inode 257 errors 2001, no inode item, link count wrong
unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref
unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref
So fix this by logging the inodes that the dentries point to when
fsyncing a directory.
A test case for xfstests follows.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Btrfs will report NO_SPACE when we create and remove files for several times,
and we can't write to filesystem until mount it again.
Steps to reproduce:
1: Create a single-dev btrfs fs with default option
2: Write a file into it to take up most fs space
3: Delete above file
4: Wait about 100s to let chunk removed
5: goto 2
Script is like following:
#!/bin/bash
# Recommend 1.2G space, too large disk will make test slow
DEV="/dev/sda16"
MNT="/mnt/tmp"
dev_size="$(lsblk -bn -o SIZE "$DEV")" || exit 2
file_size_m=$((dev_size * 75 / 100 / 1024 / 1024))
echo "Loop write ${file_size_m}M file on $((dev_size / 1024 / 1024))M dev"
for ((i = 0; i < 10; i++)); do umount "$MNT" 2>/dev/null; done
echo "mkfs $DEV"
mkfs.btrfs -f "$DEV" >/dev/null || exit 2
echo "mount $DEV $MNT"
mount "$DEV" "$MNT" || exit 2
for ((loop_i = 0; loop_i < 20; loop_i++)); do
echo
echo "loop $loop_i"
echo "dd file..."
cmd=(dd if=/dev/zero of="$MNT"/file0 bs=1M count="$file_size_m")
"${cmd[@]}" 2>/dev/null || {
# NO_SPACE error triggered
echo "dd failed: ${cmd[*]}"
exit 1
}
echo "rm file..."
rm -f "$MNT"/file0 || exit 2
for ((i = 0; i < 10; i++)); do
df "$MNT" | tail -1
sleep 10
done
done
Reason:
It is triggered by commit: 47ab2a6c68
which is used to remove empty block groups automatically, but the
reason is not in that patch. Code before works well because btrfs
don't need to create and delete chunks so many times with high
complexity.
Above bug is caused by many reason, any of them can trigger it.
Reason1:
When we remove some continuous chunks but leave other chunks after,
these disk space should be used by chunk-recreating, but in current
code, only first create will successed.
Fixed by Forrest Liu <forrestl@synology.com> in:
Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole
Reason2:
contains_pending_extent() return wrong value in calculation.
Fixed by Forrest Liu <forrestl@synology.com> in:
Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole
Reason3:
btrfs_check_data_free_space() try to commit transaction and retry
allocating chunk when the first allocating failed, but space_info->full
is set in first allocating, and prevent second allocating in retry.
Fixed in this patch by clear space_info->full in commit transaction.
Tested for severial times by above script.
Changelog v3->v4:
use light weight int instead of atomic_t to record have_remove_bgs in
transaction, suggested by:
Josef Bacik <jbacik@fb.com>
Changelog v2->v3:
v2 fixed the bug by adding more commit-transaction, but we
only need to reclaim space when we are really have no space for
new chunk, noticed by:
Filipe David Manana <fdmanana@gmail.com>
Actually, our code already have this type of commit-and-retry,
we only need to make it working with removed-bgs.
v3 fixed the bug with above way.
Changelog v1->v2:
v1 will introduce a new bug when delete and create chunk in same disk
space in same transaction, noticed by:
Filipe David Manana <fdmanana@gmail.com>
V2 fix this bug by commit transaction after remove block grops.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Suggested-by: Filipe David Manana <fdmanana@gmail.com>
Suggested-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Currently any time we try to update the block groups on disk we will walk _all_
block groups and check for the ->dirty flag to see if it is set. This function
can get called several times during a commit. So if you have several terabytes
of data you will be a very sad panda as we will loop through _all_ of the block
groups several times, which makes the commit take a while which slows down the
rest of the file system operations.
This patch introduces a dirty list for the block groups that we get added to
when we dirty the block group for the first time. Then we simply update any
block groups that have been dirtied since the last time we called
btrfs_write_dirty_block_groups. This allows us to clean up how we write the
free space cache out so it is much cleaner. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Liu Bo pointed out that my previous fix would lose the generation update in the
scenario I described. It is actually much worse than that, we could lose the
entire extent if we lose power right after the transaction commits. Consider
the following
write extent 0-4k
log extent in log tree
commit transaction
< power fail happens here
ordered extent completes
We would lose the 0-4k extent because it hasn't updated the actual fs tree, and
the transaction commit will reset the log so it isn't replayed. If we lose
power before the transaction commit we are save, otherwise we are not.
Fix this by keeping track of all extents we logged in this transaction. Then
when we go to commit the transaction make sure we wait for all of those ordered
extents to complete before proceeding. This will make sure that if we lose
power after the transaction commit we still have our data. This also fixes the
problem of the improperly updated extent generation. Thanks,
cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When committing a transaction or a log, we look for btree extents that
need to be durably persisted by searching for ranges in a io tree that
have some bits set (EXTENT_DIRTY or EXTENT_NEW). We then attempt to clear
those bits and set the EXTENT_NEED_WAIT bit, with calls to the function
convert_extent_bit, and then start writeback for the extents.
That function however can return an error (at the moment only -ENOMEM
is possible, specially when it does GFP_ATOMIC allocation requests
through alloc_extent_state_atomic) - that means the ranges didn't got
the EXTENT_NEED_WAIT bit set (or at least not for the whole range),
which in turn means a call to btrfs_wait_marked_extents() won't find
those ranges for which we started writeback, causing a transaction
commit or a log commit to persist a new superblock without waiting
for the writeback of extents in that range to finish first.
Therefore if a crash happens after persisting the new superblock and
before writeback finishes, we have a superblock pointing to roots that
weren't fully persisted or roots that point to nodes or leafs that weren't
fully persisted, causing all sorts of unexpected/bad behaviour as we endup
reading garbage from disk or the content of some node/leaf from a past
generation that got cowed or deleted and is no longer valid (for this later
case we end up getting error messages like "parent transid verify failed on
X wanted Y found Z" when reading btree nodes/leafs from disk).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
There are some actions that modify global filesystem state but cannot be
performed at the time of request, but later at the transaction commit
time when the filesystem is in a known state.
For example enabling new incompat features on-the-fly or issuing
transaction commit from unsafe contexts (sysfs handlers).
Signed-off-by: David Sterba <dsterba@suse.cz>
Truncates and renames are often used to replace old versions of a file
with new versions. Applications often expect this to be an atomic
replacement, even if they haven't done anything to make sure the new
version is fully on disk.
Btrfs has strict flushing in place to make sure that renaming over an
old file with a new file will fully flush out the new file before
allowing the transaction commit with the rename to complete.
This ordering means the commit code needs to be able to lock file pages,
and there are a few paths in the filesystem where we will try to end a
transaction with the page lock held. It's rare, but these things can
deadlock.
This patch removes the ordered flushes and switches to a best effort
filemap_flush like ext4 uses. It's not perfect, but it should fix the
deadlocks.
Signed-off-by: Chris Mason <clm@fb.com>
This exercises the various parts of the new qgroup accounting code. We do some
basic stuff and do some things with the shared refs to make sure all that code
works. I had to add a bunch of infrastructure because I needed to be able to
insert items into a fake tree without having to do all the hard work myself,
hopefully this will be usefull in the future. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Lets try this again. We can deadlock the box if we send on a box and try to
write onto the same fs with the app that is trying to listen to the send pipe.
This is because the writer could get stuck waiting for a transaction commit
which is being blocked by the send. So fix this by making sure looking at the
commit roots is always going to be consistent. We do this by keeping track of
which roots need to have their commit roots swapped during commit, and then
taking the commit_root_sem and swapping them all at once. Then make sure we
take a read lock on the commit_root_sem in cases where we search the commit root
to make sure we're always looking at a consistent view of the commit roots.
Previously we had problems with this because we would swap a fs tree commit root
and then swap the extent tree commit root independently which would cause the
backref walking code to screw up sometimes. With this patch we no longer
deadlock and pass all the weird send/receive corner cases. Thanks,
Reportedy-by: Hugo Mills <hugo@carfax.org.uk>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
So I have an awful exercise script that will run snapshot, balance and
send/receive in parallel. This sometimes would crash spectacularly and when it
came back up the fs would be completely hosed. Turns out this is because of a
bad interaction of balance and send/receive. Send will hold onto its entire
path for the whole send, but its blocks could get relocated out from underneath
it, and because it doesn't old tree locks theres nothing to keep this from
happening. So it will go to read in a slot with an old transid, and we could
have re-allocated this block for something else and it could have a completely
different transid. But because we think it is invalid we clear uptodate and
re-read in the block. If we do this before we actually write out the new block
we could write back stale data to the fs, and boom we're screwed.
Now we definitely need to fix this disconnect between send and balance, but we
really really need to not allow ourselves to accidently read in stale data over
new data. So make sure we check if the extent buffer is not under io before
clearing uptodate, this will kick back EIO to the caller instead of reading in
stale data and keep us from corrupting the fs. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Looking into some performance related issues with large amounts of metadata
revealed that we can have some pretty huge swings in fsync() performance. If we
have a lot of delayed refs backed up (as you will tend to do with lots of
metadata) fsync() will wander off and try to run some of those delayed refs
which can result in reading from disk and such. Since the actual act of fsync()
doesn't create any delayed refs there is no need to make it throttle on delayed
ref stuff, that will be handled by other people. With this patch we get much
smoother fsync performance with large amounts of metadata. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Two reasons:
- btrfs_end_transaction_dmeta() is the same as btrfs_end_transaction_throttle()
so it is unnecessary.
- All the delayed items should be dealt in the current transaction, so the
workers should not commit the transaction, instead, deal with the delayed
items as many as possible.
So we can remove btrfs_end_transaction_dmeta()
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
When we did space balance and snapshot creation at the same time, we might
meet the following oops:
kernel BUG at fs/btrfs/inode.c:3038!
[SNIP]
Call Trace:
[<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs]
[<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs]
[<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs]
[<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs]
[<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs]
[<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379
[<ffffffff811215a9>] vfs_ioctl+0x1d/0x39
[<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2
[<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8
[<ffffffff81121e88>] SyS_ioctl+0x57/0x83
[<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14
[<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b
[SNIP]
RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs]
The reason of the problem is that the relocation root creation stole
the reserved space, which was reserved for orphan item deletion.
There are several ways to fix this problem, one is to increasing
the reserved space size of the space balace, and then we can use
that space to create the relocation tree for each fs/file trees.
But it is hard to calculate the suitable size because we doesn't
know how many fs/file trees we need relocate.
We fixed this problem by reserving the space for relocation root creation
actively since the space it need is very small (one tree block, used for
root node copy), then we use that reserved space to create the
relocation tree. If we don't reserve space for relocation tree creation,
we will use the reserved space of the balance.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I was noticing the slab redzone stuff going off every once and a while during
transaction aborts. This was caused by two things
1) We would walk the pending snapshots and set their error to -ECANCELED. We
don't need to do this, the snapshot stuff waits for a transaction commit and if
there is a problem we just free our pending snapshot object and exit. Doing
this was causing us to touch the pending snapshot object after the thing had
already been freed.
2) We were freeing the transaction manually with wanton disregard for it's
use_count reference counter. To fix this I cleaned up the transaction freeing
loop to either wait for the transaction commit to finish if it was in the middle
of that (since it will be cleaned and freed up there) or to do the cleanup
oursevles.
I also moved the global "kill all things dirty everywhere" stuff outside of the
transaction cleanup loop since that only needs to be done once. With this patch
I'm no longer seeing slab corruption because of use after frees. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
A user reported a panic when running with autodefrag and deleting snapshots.
This is because we could end up trying to add the root to the dead roots list
twice. To fix this check to see if we are empty before adding ourselves to the
dead roots list. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When adjusting the enospc rules for relocation I ran into a deadlock because we
were relocating the only system chunk and that forced us to try and allocate a
new system chunk while holding locks in the chunk tree, which caused us to
deadlock. To fix this I've moved all of the dev extent addition and chunk
addition out to the delayed chunk completion stuff. We still keep the in-memory
stuff which makes sure everything is consistent.
One change I had to make was to search the commit root of the device tree to
find a free dev extent, and hold onto any chunk em's that we allocated in that
transaction so we do not allocate the same dev extent twice. This has the side
effect of fixing a bug with balance that has been there ever since balance
existed. Basically you can free a block group and it's dev extent and then
immediately allocate that dev extent for a new block group and write stuff to
that dev extent, all within the same transaction. So if you happen to crash
during a balance you could come back to a completely broken file system. This
patch should keep these sort of things from happening in the future since we
won't be able to allocate free'd dev extents until after the transaction
commits. This has passed all of the xfstests and my super annoying stress test
followed by a balance. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We used 3 variants to track the state of the transaction, it was complex
and wasted the memory space. Besides that, it was hard to understand that
which types of the transaction handles should be blocked in each transaction
state, so the developers often made mistakes.
This patch improved the above problem. In this patch, we define 6 states
for the transaction,
enum btrfs_trans_state {
TRANS_STATE_RUNNING = 0,
TRANS_STATE_BLOCKED = 1,
TRANS_STATE_COMMIT_START = 2,
TRANS_STATE_COMMIT_DOING = 3,
TRANS_STATE_UNBLOCKED = 4,
TRANS_STATE_COMPLETED = 5,
TRANS_STATE_MAX = 6,
}
and just use 1 variant to track those state.
In order to make the blocked handle types for each state more clear,
we introduce a array:
unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = {
[TRANS_STATE_RUNNING] = 0U,
[TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE |
__TRANS_START),
[TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE |
__TRANS_START |
__TRANS_ATTACH),
[TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE |
__TRANS_START |
__TRANS_ATTACH |
__TRANS_JOIN),
[TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE |
__TRANS_START |
__TRANS_ATTACH |
__TRANS_JOIN |
__TRANS_JOIN_NOLOCK),
[TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE |
__TRANS_START |
__TRANS_ATTACH |
__TRANS_JOIN |
__TRANS_JOIN_NOLOCK),
}
it is very intuitionistic.
Besides that, because we remove ->in_commit in transaction structure, so
the lock ->commit_lock which was used to protect it is unnecessary, remove
->commit_lock.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We used ->num_joined track if there were some writers which join the current
transaction when the committer was sleeping. If some writers joined the current
transaction, we has to continue the while loop to do some necessary stuff, such
as flush the ordered operations. But it is unnecessary because we will do it
after the while loop.
Besides that, tracking ->num_joined would make the committer drop into the while
loop when there are lots of internal writers(TRANS_JOIN).
So we remove ->num_joined and don't track if there are some writers which join
the current transaction when the committer is sleeping.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
btrfs_commit_transaction has the following loop before we commit the
transaction.
do {
// attempt to do some useful stuff and/or sleep
} while (atomic_read(&cur_trans->num_writers) > 1 ||
(should_grow && cur_trans->num_joined != joined));
This is used to prevent from the TRANS_START to get in the way of a
committing transaction. But it does not prevent from TRANS_JOIN, that
is we would do this loop for a long time if some writers JOIN the
current transaction endlessly.
Because we need join the current transaction to do some useful stuff,
we can not block TRANS_JOIN here. So we introduce a external writer
counter, which is used to count the TRANS_USERSPACE/TRANS_START writers.
If the external writer counter is zero, we can break the above loop.
In order to make the code more clear, we don't use enum variant
to define the type of the transaction handle, use bitmask instead.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Big patch, but all it does is add statics to functions which
are in fact static, then remove the associated dead-code fallout.
removed functions:
btrfs_iref_to_path()
__btrfs_lookup_delayed_deletion_item()
__btrfs_search_delayed_insertion_item()
__btrfs_search_delayed_deletion_item()
find_eb_for_page()
btrfs_find_block_group()
range_straddles_pages()
extent_range_uptodate()
btrfs_file_extent_length()
btrfs_scrub_cancel_devid()
btrfs_start_transaction_lflush()
btrfs_print_tree() is left because it is used for debugging.
btrfs_start_transaction_lflush() and btrfs_reada_detach() are
left for symmetry.
ulist.c functions are left, another patch will take care of those.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Each time pick one dead root from the list and let the caller know if
it's needed to continue. This should improve responsiveness during
umount and balance which at some point waits for cleaning all currently
queued dead roots.
A new dead root is added to the end of the list, so the snapshots
disappear in the order of deletion.
The snapshot cleaning work is now done only from the cleaner thread and the
others wake it if needed.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
There are two problems in the space reservation of the snapshot/
subvolume creation.
- don't reserve the space for the root item insertion
- the space which is reserved in the qgroup is different with
the free space reservation. we need reserve free space for
7 items, but in qgroup reservation, we need reserve space only
for 3 items.
So we implement new metadata reservation functions for the
snapshot/subvolume creation.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Since we have grabbed the parent inode at the beginning of the
snapshot creation, and both sync and async snapshot creation
release it after the pending snapshots are actually created,
it is safe to access the parent inode directly during the snapshot
creation, we needn't use dget_parent/dput to fix the parent dentry
and get the dir inode.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
In some cases, we need commit the current transaction, but don't want
to start a new one if there is no running transaction, so we introduce
the function - btrfs_attach_transaction(), which can catch the current
transaction, and return -ENOENT if there is no running transaction.
But no running transaction doesn't mean the current transction completely,
because we removed the running transaction before it completes. In some
cases, it doesn't matter. But in some special cases, such as freeze fs, we
hope the transaction is fully on disk, it will introduce some bugs, for
example, we may feeze the fs and dump the data in the disk, if the transction
doesn't complete, we would dump inconsistent data. So we need fix the above
problem for those cases.
We fixes this problem by introducing a function:
btrfs_attach_transaction_barrier()
if we hope all the transaction is fully on the disk, even they are not
running, we can use this function.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Miao made the ordered operations stuff run async, which introduced a
deadlock where we could get somebody (sync) racing in and committing the
transaction while a commit was already happening. The new committer would
try and flush ordered operations which would hang waiting for the commit to
finish because it is done asynchronously and no longer inherits the callers
trans handle. To fix this we need to make the ordered operations list a per
transaction list. We can get new inodes added to the ordered operation list
by truncating them and then having another process writing to them, so this
makes it so that anybody trying to add an ordered operation _must_ start a
transaction in order to add itself to the list, which will keep new inodes
from getting added to the ordered operations list after we start committing.
This should fix the deadlock and also keeps us from doing a lot more work
than we need to during commit. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The entry point at the defrag ioctl always sets "cache only" to 0;
the codepaths haven't run for a long time as far as I can
tell. Chris says they're dead code, so remove them.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
If we start running low on metadata space we will try to allocate a chunk,
which could then try to allocate a chunk to add the device entry. The thing
is we allocate a chunk before we try really hard to make the allocation, so
we should be able to find space for the device entry. Add a flag to the
trans handle so we know we're currently allocating a chunk so we can just
bail out if we try to allocate another chunk. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
In some places(such as: evicting inode), we just can not flush the reserved
space of delalloc, flushing the delayed directory index and delayed inode
is OK, but we don't try to flush those things and just go back when there is
no enough space to be reserved. This patch fixes this problem.
We defined 3 types of the flush operations: NO_FLUSH, FLUSH_LIMIT and FLUSH_ALL.
If we can in the transaction, we should not flush anything, or the deadlock
would happen, so use NO_FLUSH. If we flushing the reserved space of delalloc
would cause deadlock, use FLUSH_LIMIT. In the other cases, FLUSH_ALL is used,
and we will flush all things.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
With the following debug patch:
static int btrfs_freeze(struct super_block *sb)
{
+ struct btrfs_fs_info *fs_info = btrfs_sb(sb);
+ struct btrfs_transaction *trans;
+
+ spin_lock(&fs_info->trans_lock);
+ trans = fs_info->running_transaction;
+ if (trans) {
+ printk("Transid %llu, use_count %d, num_writer %d\n",
+ trans->transid, atomic_read(&trans->use_count),
+ atomic_read(&trans->num_writers));
+ }
+ spin_unlock(&fs_info->trans_lock);
return 0;
}
I found there was a orphan transaction after the freeze operation was done.
It is because the transaction may not be committed when the transaction handle
end even though it is the last handle of the current transaction. This design
avoid committing the transaction frequently, but also introduce the above
problem.
So I add btrfs_attach_transaction() which can catch the current transaction
and commit it. If there is no transaction, it will return ENOENT, and do not
anything.
This function also can be used to instead of btrfs_join_transaction_freeze()
because it don't increase the writer counter and don't start a new transaction,
so it also can fix the deadlock between sync and freeze.
Besides that, it is used to instead of btrfs_join_transaction() in
transaction_kthread(), because if there is no transaction, the transaction
kthread needn't anything.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
This patch add a type field into the transaction handle structure,
in this way, we needn't implement various end-transaction functions
and can make the code more simple and readable.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
I screwed this up, there is a race between checking if there is a running
transaction and actually starting a transaction in sync where we could race
with a freezer and get ourselves into trouble. To fix this we need to make
a new join type to only do the try lock on the freeze stuff. If it fails
we'll return EPERM and just return from sync. This fixes a hang Liu Bo
reported when running xfstest 68 in a loop. Thanks,
Reported-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
So we have lots of places where we try to preallocate chunks in order to
make sure we have enough space as we make our allocations. This has
historically meant that we're constantly tweaking when we should allocate a
new chunk, and historically we have gotten this horribly wrong so we way
over allocate either metadata or data. To try and keep this from happening
we are going to make it so that the block group item insertion is done out
of band at the end of a transaction. This will allow us to create chunks
even if we are trying to make an allocation for the extent tree. With this
patch my enospc tests run faster (didn't expect this) and more efficiently
use the disk space (this is what I wanted). Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
When we delete a inode, we will remove all the delayed items including delayed
inode update, and then truncate all the relative metadata. If there is lots of
metadata, we will end the current transaction, and start a new transaction to
truncate the left metadata. In this way, we will leave a inode item that its
link counter is > 0, and also may leave some directory index items in fs/file tree
after the current transaction ends. In other words, the metadata in this fs/file tree
is inconsistent. If we create a snapshot for this tree now, we will find a inode with
corrupted metadata in the new snapshot, and we won't continue to drop the left metadata,
because its link counter is not 0.
We fix this problem by updating the inode item before the current transaction ends.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
This is based on Josef's "Btrfs: turbo charge fsync".
The current btrfs checks if an inode is in log by comparing
root's last_log_commit to inode's last_sub_trans[2].
But the problem is that this root->last_log_commit is shared among
inodes.
Say we have N inodes to be logged, after the first inode,
root's last_log_commit is updated and the N-1 remained files will
be skipped.
This fixes the bug by keeping a local copy of root's last_log_commit
inside each inode and this local copy will be maintained itself.
[1]: we regard each log transaction as a subset of btrfs's transaction,
i.e. sub_trans
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
There is weird logic I had to put in place to make sure that when we were
adding csums that we'd used the delalloc block rsv instead of the global
block rsv. Part of this meant that we had to free up our transaction
reservation before we ran the delayed refs since csum deletion happens
during the delayed ref work. The problem with this is that when we release
a reservation we will add it to the global reserve if it is not full in
order to keep us going along longer before we have to force a transaction
commit. By releasing our reservation before we run delayed refs we don't
get the opportunity to drain down the global reserve for the work we did, so
we won't refill it as often. This isn't a problem per-se, it just results
in us possibly committing transactions more and more often, and in rare
cases could cause those WARN_ON()'s to pop in use_block_rsv because we ran
out of space in our block rsv.
This also helps us by holding onto space while the delayed refs run so we
don't end up with as many people trying to do things at the same time, which
again will help us not force commits or hit the use_block_rsv warnings.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
When creating a subvolume or snapshot, it is necessary
to initialize the qgroup account with a copy of some
other (tracking) qgroup. This patch adds parameters
to the ioctls to pass the information from which qgroup
to inherit.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Like block reserves, reserve a small piece of space on each
transaction start and for delalloc. These are the hooks that
can actually return EDQUOT to the user.
The amount of space reserved is tracked in the transaction
handle.
Signed-off-by: Arne Jansen <sensille@gmx.net>
This patch only add a consistancy check to validate that the
same root is passed to start_transaction and end_transaction.
Subvolume quota depends on this.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Originally this was going to be used as a way to give hints to the allocator,
but frankly we can get much better hints elsewhere and it's not even used at all
for anything usefull. In addition to be completely useless, when we initialize
an inode we try and find a freeish block group to set as the inodes block group,
and with a completely full 40gb fs this takes _forever_, so I imagine with say
1tb fs this is just unbearable. So just axe the thing altoghether, we don't
need it and it saves us 8 bytes in the inode and saves us 500 microseconds per
inode lookup in my testcase. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
We use trans_mutex for lots of things, here's a basic list
1) To serialize trans_handles joining the currently running transaction
2) To make sure that no new trans handles are started while we are committing
3) To protect the dead_roots list and the transaction lists
Really the serializing trans_handles joining is not too hard, and can really get
bogged down in acquiring a reference to the transaction. So replace the
trans_mutex with a trans_lock spinlock and use it to do the following
1) Protect fs_info->running_transaction. All trans handles have to do is check
this, and then take a reference of the transaction and keep on going.
2) Protect the fs_info->trans_list. This doesn't get used too much, basically
it just holds the current transactions, which will usually just be the currently
committing transaction and the currently running transaction at most.
3) Protect the dead roots list. This is only ever processed by splicing the
list so this is relatively simple.
4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using
the trans_mutex before, so this is a pretty straightforward change.
5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over
the entirety of the commit we need to have a way to block new people from
creating a new transaction while we're doing our work. So we set no_trans_join
and in join_transaction we test to see if that is set, and if it is we do a
wait_on_commit.
6) Make the transaction use count atomic so we don't need to take locks to
modify it when we're dropping references.
7) Add a commit_lock to the transaction to make sure multiple people trying to
commit the same transaction don't race and commit at the same time.
8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl
trans.
I have tested this with xfstests, but obviously it is a pretty hairy change so
lots of testing is greatly appreciated. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
We currently track trans handles in current->journal_info, but we don't actually
use it. This patch fixes it. This will cover the case where we have multiple
people starting transactions down the call chain. This keeps us from having to
allocate a new handle and all of that, we just increase the use count of the
current handle, save the old block_rsv, and return. I tested this with xfstests
and it worked out fine. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
I keep forgetting that btrfs_join_transaction() just ignores the num_items
argument, which leads me to sending pointless patches and looking stupid :). So
just kill the num_items argument from btrfs_join_transaction and
btrfs_start_ioctl_transaction, since neither of them use it. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Changelog V5 -> V6:
- Fix oom when the memory load is high, by storing the delayed nodes into the
root's radix tree, and letting btrfs inodes go.
Changelog V4 -> V5:
- Fix the race on adding the delayed node to the inode, which is spotted by
Chris Mason.
- Merge Chris Mason's incremental patch into this patch.
- Fix deadlock between readdir() and memory fault, which is reported by
Itaru Kitayama.
Changelog V3 -> V4:
- Fix nested lock, which is reported by Itaru Kitayama, by updating space cache
inode in time.
Changelog V2 -> V3:
- Fix the race between the delayed worker and the task which does delayed items
balance, which is reported by Tsutomu Itoh.
- Modify the patch address David Sterba's comment.
- Fix the bug of the cpu recursion spinlock, reported by Chris Mason
Changelog V1 -> V2:
- break up the global rb-tree, use a list to manage the delayed nodes,
which is created for every directory and file, and used to manage the
delayed directory name index items and the delayed inode item.
- introduce a worker to deal with the delayed nodes.
Compare with Ext3/4, the performance of file creation and deletion on btrfs
is very poor. the reason is that btrfs must do a lot of b+ tree insertions,
such as inode item, directory name item, directory name index and so on.
If we can do some delayed b+ tree insertion or deletion, we can improve the
performance, so we made this patch which implemented delayed directory name
index insertion/deletion and delayed inode update.
Implementation:
- introduce a delayed root object into the filesystem, that use two lists to
manage the delayed nodes which are created for every file/directory.
One is used to manage all the delayed nodes that have delayed items. And the
other is used to manage the delayed nodes which is waiting to be dealt with
by the work thread.
- Every delayed node has two rb-tree, one is used to manage the directory name
index which is going to be inserted into b+ tree, and the other is used to
manage the directory name index which is going to be deleted from b+ tree.
- introduce a worker to deal with the delayed operation. This worker is used
to deal with the works of the delayed directory name index items insertion
and deletion and the delayed inode update.
When the delayed items is beyond the lower limit, we create works for some
delayed nodes and insert them into the work queue of the worker, and then
go back.
When the delayed items is beyond the upper bound, we create works for all
the delayed nodes that haven't been dealt with, and insert them into the work
queue of the worker, and then wait for that the untreated items is below some
threshold value.
- When we want to insert a directory name index into b+ tree, we just add the
information into the delayed inserting rb-tree.
And then we check the number of the delayed items and do delayed items
balance. (The balance policy is above.)
- When we want to delete a directory name index from the b+ tree, we search it
in the inserting rb-tree at first. If we look it up, just drop it. If not,
add the key of it into the delayed deleting rb-tree.
Similar to the delayed inserting rb-tree, we also check the number of the
delayed items and do delayed items balance.
(The same to inserting manipulation)
- When we want to update the metadata of some inode, we cached the data of the
inode into the delayed node. the worker will flush it into the b+ tree after
dealing with the delayed insertion and deletion.
- We will move the delayed node to the tail of the list after we access the
delayed node, By this way, we can cache more delayed items and merge more
inode updates.
- If we want to commit transaction, we will deal with all the delayed node.
- the delayed node will be freed when we free the btrfs inode.
- Before we log the inode items, we commit all the directory name index items
and the delayed inode update.
I did a quick test by the benchmark tool[1] and found we can improve the
performance of file creation by ~15%, and file deletion by ~20%.
Before applying this patch:
Create files:
Total files: 50000
Total time: 1.096108
Average time: 0.000022
Delete files:
Total files: 50000
Total time: 1.510403
Average time: 0.000030
After applying this patch:
Create files:
Total files: 50000
Total time: 0.932899
Average time: 0.000019
Delete files:
Total files: 50000
Total time: 1.215732
Average time: 0.000024
[1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3
Many thanks for Kitayama-san's help!
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: David Sterba <dave@jikos.cz>
Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Tested-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
I've been working on making our O_DIRECT latency not suck and I noticed we were
taking the trans_mutex in btrfs_end_transaction. So to do this we convert
num_writers and use_count to atomic_t's and just decrement them in
btrfs_end_transaction. Instead of deleting the transaction from the trans list
in put_transaction we do that in btrfs_commit_transaction() since that's the
only time it actually needs to be removed from the list. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Usage:
Set BTRFS_SUBVOL_RDONLY of btrfs_ioctl_vol_arg_v2->flags, and call
ioctl(BTRFS_I0CTL_SNAP_CREATE_V2).
Implementation:
- Set readonly bit of btrfs_root_item->flags.
- Add readonly checks in btrfs_permission (inode_permission),
btrfs_setattr, btrfs_set/remove_xattr and some ioctls.
Changelog for v3:
- Eliminate btrfs_root->readonly, but check btrfs_root->root_item.flags.
- Rename BTRFS_ROOT_SNAP_RDONLY to BTRFS_ROOT_SUBVOL_RDONLY.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
START_SYNC will start a sync/commit, but not wait for it to
complete. Any modification started after the ioctl returns is
guaranteed not to be included in the commit. If a non-NULL
pointer is passed, the transaction id will be returned to
userspace.
WAIT_SYNC will wait for any in-progress commit to complete. If a
transaction id is specified, the ioctl will block and then
return (success) when the specified transaction has committed.
If it has already committed when we call the ioctl, it returns
immediately. If the specified transaction doesn't exist, it
returns EINVAL.
If no transaction id is specified, WAIT_SYNC will wait for the
currently committing transaction to finish it's commit to disk.
If there is no currently committing transaction, it returns
success.
These ioctls are useful for applications which want to impose an
ordering on when fs modifications reach disk, but do not want to
wait for the full (slow) commit process to do so.
Picky callers can take the transid returned by START_SYNC and
feed it to WAIT_SYNC, and be certain to wait only as long as
necessary for the transaction _they_ started to reach disk.
Sloppy callers can START_SYNC and WAIT_SYNC without a transid,
and provided they didn't wait too long between the calls, they
will get the same result. However, if a second commit starts
before they call WAIT_SYNC, they may end up waiting longer for
it to commit as well. Even so, a START_SYNC+WAIT_SYNC still
guarantees that any operation completed before the START_SYNC
reaches disk.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Add support for an async transaction commit that is ordered such that any
subsequent operations will join the following transaction, but does not
wait until the current commit is fully on disk. This avoids much of the
latency associated with the btrfs_commit_transaction for callers concerned
with serialization and not safety.
The wait_for_unblock flag controls whether we wait for the 'middle' portion
of commit_transaction to complete, which is necessary if the caller expects
some of the modifications contained in the commit to be available (this is
the case for subvol/snapshot creation).
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
In order to save free space cache, we need an inode to hold the data, and we
need a special item to point at the right inode for the right block group. So
first, create a special item that will point to the right inode, and the number
of extent entries we will have and the number of bitmaps we will have. We
truncate and pre-allocate space everytime to make sure it's uptodate.
This feature will be turned on as soon as you mount with -o space_cache, however
it is safe to boot into old kernels, they will just generate the cache the old
fashion way. When you boot back into a newer kernel we will notice that we
modified and not the cache and automatically discard the cache.
Signed-off-by: Josef Bacik <josef@redhat.com>
Reserve metadata space for extent tree, checksum tree and root tree
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Besides simplify the code, this change makes sure all metadata
reservation for normal metadata operations are released after
committing transaction.
Changes since V1:
Add code that check if unlink and rmdir will free space.
Add ENOSPC handling for clone ioctl.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Introducing metadata reseravtion contexts has two major advantages.
First, it makes metadata reseravtion more traceable. Second, it can
reclaim freed space and re-add them to the itself after transaction
committed.
Besides add btrfs_block_rsv structure and related helper functions,
This patch contains following changes:
Move code that decides if freed tree block should be pinned into
btrfs_free_tree_block().
Make space accounting more accurate, mainly for handling read only
block groups.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We allow two log transactions at a time, but use same flag
to mark dirty tree-log btree blocks. So we may flush dirty
blocks belonging to newer log transaction when committing a
log transaction. This patch fixes the issue by using two
flags to mark dirty tree-log btree blocks.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Syncing the tree log is a 3 phase operation.
1) write and wait for all the tree log blocks for a given root.
2) write and wait for all the tree log blocks for the
tree of tree log roots.
3) write and wait for the super blocks (barriers here)
This isn't as efficient as it could be because there is
no requirement to wait for the blocks from step one to hit the disk
before we start writing the blocks from step two. This commit
changes the sequence so that we don't start waiting until
all the tree blocks from both steps one and two have been sent
to disk.
We do this by breaking up btrfs_write_wait_marked_extents into
two functions, which is trivial because it was already broken
up into two parts.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
rpm has a habit of running fdatasync when the file hasn't
changed. We already detect if a file hasn't been changed
in the current transaction but it might have been sent to
the tree-log in this transaction and not changed since
the last call to fsync.
In this case, we want to avoid a tree log sync, which includes
a number of synchronous writes and barriers. This commit
extends the existing tracking of the last transaction to change
a file to also track the last sub-transaction.
The end result is that rpm -ivh and -Uvh are roughly twice as fast,
and on par with ext3.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
