Add a new entry for "type" in the section for standard plane properties.
v3: improve paragraph about mixing legacy IOCTLs with explicit usage,
note that a driver may support cursors without cursor planes (Daniel)
v4: fixing rebase gone wrong
v5:
- Fix typo (Daniel)
- Mention CAP_ATOMIC instead of CAP_UNIVERSAL_PLANES when referring to
atomic test-only commits (Daniel)
- Add newlines at end of sections (Daniel)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115110626.12233-2-contact@emersion.fr
Core Changes:
- Lots of drm documentation updates by Simor Ser.
- Require that each crtc has a unique primary plane.
- Add fixme that fbdev_generic_setup is confusing.
Driver Changes:
- Update addresses for TI display drivers maintainers.
- Make DRM_VIRTIO_GPU select VIRTIO.
- Small fixes to qxl, virtio, hisilicon, tve200, panel/s6e63m0.
-----BEGIN PGP SIGNATURE-----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=hp3d
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-01-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.12:
Core Changes:
- Lots of drm documentation updates by Simor Ser.
- Require that each crtc has a unique primary plane.
- Add fixme that fbdev_generic_setup is confusing.
Driver Changes:
- Update addresses for TI display drivers maintainers.
- Make DRM_VIRTIO_GPU select VIRTIO.
- Small fixes to qxl, virtio, hisilicon, tve200, panel/s6e63m0.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fdfbfd7a-b91d-3f59-11c8-984704ce0ee1@linux.intel.com
- Reduce stack usage in ipu-di.
- Fix imx-ldb for compile tests.
- Make drm encoder control functions optional.
- Add drm managed variants drmm_encoder_alloc(),
drmm_simple_encoder_alloc(), drmm_universal_plane_alloc(), and
drmm_crtc_alloc_with_planes() for drm_encoder_init(),
drm_simple_encoder_init(), drm_universal_plane_init(), and
drm_crtc_init_with_planes(), respectively.
- Update imx-drm to use the new functions for drm managed resource
allocation, moving initialization from bind to probe where possible.
- Fix imx-tve clock provider leak.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCX/M62RcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwPdlAP4/zZ401iFrj+ZiRTYFNGHaRrBI
ldQ97lk2Ndzgp5tHzQD/dsAMFymw5+fYlp2xa25kB4LQJLzOC+KzlZwFKF5W4QM=
=I3bV
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2021-01-04' of git://git.pengutronix.de/git/pza/linux into drm-next
drm/imx: fixes and drm managed resources
- Reduce stack usage in ipu-di.
- Fix imx-ldb for compile tests.
- Make drm encoder control functions optional.
- Add drm managed variants drmm_encoder_alloc(),
drmm_simple_encoder_alloc(), drmm_universal_plane_alloc(), and
drmm_crtc_alloc_with_planes() for drm_encoder_init(),
drm_simple_encoder_init(), drm_universal_plane_init(), and
drm_crtc_init_with_planes(), respectively.
- Update imx-drm to use the new functions for drm managed resource
allocation, moving initialization from bind to probe where possible.
- Fix imx-tve clock provider leak.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[danvet: Fix conflict between doc changes by both Philipp and Simon
Ser, see 9999587b68 ("drm: rework description of primary and cursor
planes")]
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/c745fc1596898932c9454fd2979297b4242566a2.camel@pengutronix.de
Add an alternative to drm_universal_plane_init() that allocates
and initializes a plane and registers drm_plane_cleanup() with
drmm_add_action_or_reset().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
User-space expects to be able to pick a primary plane for each CRTC
exposed by the driver. Make sure this assumption holds in
drm_mode_config_validate.
Use the legacy drm_crtc.primary field to check this, because it's
simpler and we require drivers to set it anyways. Accumulate a set of
primary planes which are already used for a CRTC in a bitmask. Error out
if a primary plane is re-used.
v2: new patch
v3:
- Use u64 instead of __u64 (Jani)
- Use `unsigned int` instead of `unsigned` (Jani)
v4:
- Use u32 instead of u64 for plane mask (Ville)
- Use drm_plane_mask instead of BIT (Ville)
- Fix typos (Ville)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211184634.74534-4-contact@emersion.fr
Introduce a new "Standard Plane Properties" section for properties
defined in drm_plane.c. Move the mis-placed IN_FORMATS docs there.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201217113220.102271-3-contact@emersion.fr
If a CRTC is missing a legacy primary plane pointer, a lot of things
will be broken for user-space: fbdev stops working and the entire legacy
uAPI stops working.
Require all drivers to populate drm_crtc.primary to prevent these
issues. Warn if it's NULL.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211184634.74534-3-contact@emersion.fr
Introduce per-plane and per-CRTC scaling filter properties to allow
userspace to select the driver's default scaling filter or
Nearest-neighbor(NN) filter for upscaling operations on CRTC and
plane.
Drivers can set up this property for a plane by calling
drm_plane_create_scaling_filter() and for a CRTC by calling
drm_crtc_create_scaling_filter().
NN filter works by filling in the missing color values in the upscaled
image with that of the coordinate-mapped nearest source pixel value.
NN filter for integer multiple scaling can be particularly useful for
for pixel art games that rely on sharp, blocky images to deliver their
distinctive look.
changes since: v6:
* Move property doc to existing "Standard CRTC Properties" and
"Plane Composition Properties" doc comments (Simon)
changes since v3:
* Refactor code, add new function for common code (Ville)
changes since v2:
* Create per-plane and per-CRTC scaling filter property (Ville)
changes since v1:
* None
changes since RFC:
* Add separate properties for plane and CRTC (Ville)
Link: https://github.com/xbmc/xbmc/pull/18194
Link: https://github.com/xbmc/xbmc/pull/18567
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020161427.6941-2-pankaj.laxminarayan.bharadiya@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9C2tseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGgXoH/AuyLuMWwukVjVAx
b2N2Ri0qFVyZWLky+uPqc4NkqJCbD/Rt2Kq8odLnJOrs2bXKpP5KrMl4sVqwSRr4
CSkHkpo4oglmIxe5ptoWmWjrvHm/KNDZd2PY8cehii5eXG+aS7g3rIYjSFlXzP+1
yndJ00H7CDOxHd/DngqfD+Sr7j76EM1iZE9316JR7TEu5o38I4Ipu6+3L3uFZVlf
M90SmymY6hM7AJAyuOrd79ffXQry9KvWMUYyRkYyDK8y9taOSzfdfpppk8q5cVB1
l4pcPNBiveRM3Yet7UAMb8FSz8OG0rPkkCsq8ALNU/UO91IDY832OUyLxXUpWlf6
ZWRP2HA=
=596f
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc2' into drm-misc-fixes
Backmerge requested by Tomi for a fix to omap inconsistent
locking state issue, and because we need at least v5.9-rc2 now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
This fell off in the conversion in
commit 9bcaa3fe58
Author: Michal Orzel <michalorzel.eng@gmail.com>
Date: Tue Apr 28 19:10:04 2020 +0200
drm: Replace drm_modeset_lock/unlock_all with DRM_MODESET_LOCK_ALL_* helpers
but it's caught by the drm_warn_on_modeset_not_all_locked() that the
legacy modeset code uses. Since this is the bkl and it's unclear
what's all protected, play it safe and grab it again for legacy
drivers.
Unfortunately this means we need to sprinkle a few more #includes
around.
Also we need to add the drm_device as a parameter to the _END macro.
Finally remove the mute_lock() from setcrtc, since that's now done by
the macro.
Cc: Alex Deucher <alexdeucher@gmail.com>
References: https://gitlab.freedesktop.org/drm/amd/-/issues/1224
Fixes: 9bcaa3fe58 ("drm: Replace drm_modeset_lock/unlock_all with DRM_MODESET_LOCK_ALL_* helpers")
Cc: Michal Orzel <michalorzel.eng@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200814093842.3048472-1-daniel.vetter@ffwll.ch
The zpos property is used by userspace to sort the order of planes.
While the property is not mandatory for drivers to implement, mixing
planes with and without zpos confuses userspace, and shall not be
allowed. Clarify this in the documentation and warn at runtime if the
drivers mixes planes with and without zpos properties.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If userspace doesn't enable universal planes, then we automatically
add the primary and cursor planes. But for universal userspace there's
no such check (and maybe we only want to give the lessee one plane,
maybe not even the primary one), hence we need to check for the
implied plane.
v2: don't forget setcrtc ioctl.
v3: Still allow disabling of the crtc in SETCRTC.
Cc: stable@vger.kernel.org
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-6-daniel.vetter@ffwll.ch
When drivers pass non-empty lists of modifiers for initializing their
planes, we can infer that they allow framebuffer modifiers and set the
driver's allow_fb_modifiers mode config element.
In case the allow_fb_modifiers element was not set (some drivers tend
to set them after registering planes), the modifiers will still be
registered but won't be available to userspace unless the flag is set
later. However in that case, the IN_FORMATS blob won't be created.
In order to avoid this case and generally reduce the trouble associated
with the flag, always set allow_fb_modifiers when a non-empty list of
format modifiers is passed at plane init.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190104085610.5829-1-paul.kocialkowski@bootlin.com
This patch adds a couple of helpers to remove the boilerplate involved
in grabbing all of the modeset locks.
I've also converted the obvious cases in drm core to use the helpers.
The only remaining instance of drm_modeset_lock_all_ctx() is in
drm_framebuffer. It's complicated by the state clear that occurs on
deadlock. ATM, there's no way to inject code in the deadlock path with
the helpers, so it's unfit for conversion.
Changes in v2:
- Relocate ret argument to the end of the list (Daniel)
- Incorporate Daniel's doc suggestions (Daniel)
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129150423.239081-4-sean@poorly.run
Add a function to check whether there is at least one plane that
supports a specific format and modifier combination. Drivers can
use this to reject unsupported formats/modifiers in .fb_create().
v2: Accept anyformat if the driver doesn't do planes (Eric)
s/planes_have_format/any_plane_has_format/ (Eric)
Check the modifier as well since we already have a function
that does both
v3: Don't do the check in the core since we may not know the
modifier yet, instead export the function and let drivers
call it themselves
Cc: Eric Anholt <eric@anholt.net>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029183453.28541-1-ville.syrjala@linux.intel.com
If the ioctl is not supported on a particular piece of HW/driver
combination, report ENOTSUP (aka EOPNOTSUPP) so that it can be easily
distinguished from both the lack of the ioctl and from a regular invalid
parameter.
v2: Across all the kms ioctls we had a mixture of reporting EINVAL,
ENODEV and a few ENOTSUPP (most where EINVAL) for a failed
drm_core_check_feature(). Update everybody to report ENOTSUPP.
v3: ENOTSUPP is an internal errno! It's value (524) does not correspond
to a POSIX errno, the one we want is ENOTSUP. However,
uapi/asm-generic/errno.h doesn't include ENOTSUP but man errno says
"ENOTSUP and EOPNOTSUPP have the same value on Linux,
but according to POSIX.1 these error values should be
distinct."
so use EOPNOTSUPP as its equivalent.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20180913192050.24812-1-chris@chris-wilson.co.uk
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/drm_plane.c: In function 'drm_mode_getplane_res':
drivers/gpu/drm/drm_plane.c:475:26: warning:
variable 'config' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1536646814-186429-1-git-send-email-yuehaibing@huawei.com
All the plane->fb/old_fb/crtc dance of __setplane_internal() is
pointless on atomic drivers. So let's just introduce a simpler
version that skips all that.
Ideally we could also skip the __setplane_check() as
drm_atomic_plane_check() already checks for everything, but the
legacy cursor/"async" .update_plane() tricks bypass that so
we still need to call __setplane_check(). Toss in a FIXME to
remind someone to clean this up later.
v2: Use drm_drv_uses_atomic_modeset() (Daniel)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705185907.9524-1-ville.syrjala@linux.intel.com
This patch add checks for atomic_[duplicate/destroy]_state of
drm_[connector/crtc/plane]_funcs for atomic drivers in the relevant
drm_*_init functions since these callback are mandatory for atomic drivers.
Update the kerneldoc comments for those callbacks.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525012555.GA8448@haneen-vb
Stop playing around with plane->crtc/fb/old_fb with atomic
drivers. Make life a lot simpler when we don't have to do the
magic old_fb vs. fb dance around plane updates. That way we
can't risk plane->fb getting out of sync with plane->state->fb
and we're less likely to leak any refcounts as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-14-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
For parameterized modifiers (Broadcom's SAND and UIF), we need to
allow the parameter fields to be filled in, while exposing only the
variant of the modifier with the parameter unfilled in the internal
arrays and the format blob.
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-1-eric@anholt.net
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Instead of assigning the plane->fb pointer and clearing the fb pointer
to hand over the reference, let's just do it by grabbing another
referece for plane->fb and let fb keep its original one.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-8-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Make the code a bit more readable by storing the plane pointer in a
local variable rather than having to do crtc->{primary,cursor} all the
time.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-6-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Driver Changes:
- Lift alpha_support protection from Cannonlake (Rodrigo)
* Meaning the driver should mostly work for the hardware we had
at our disposal when testing
* Used to be preliminary_hw_support
- Add missing Cannonlake PCI device ID of 0x5A4C (Rodrigo)
- Cannonlake port register fix (Mahesh)
- Fix Dell Venue 8 Pro black screen after modeset (Hans)
- Fix for always returning zero out-fence from execbuf (Daniele)
- Fix HDMI audio when no no relevant video output is active (Jani)
- Fix memleak of VBT data on driver_unload (Hans)
- Fix for KASAN found locking issue (Maarten)
- RCU barrier consolidation to improve igt/gem_sync/idle (Chris)
- Optimizations to IRQ handlers (Chris)
- vblank tracking improvements (64-bit resolution, PM) (Dhinakaran)
- Pipe select bit corrections (Ville)
- Reduce runtime computed device_info fields (Chris)
- Tune down some WARN_ONs to GEM_BUG_ON now that CI has good coverage (Chris)
- A bunch of kerneldoc warning fixes (Chris)
* tag 'drm-intel-next-2018-02-21' of git://anongit.freedesktop.org/drm/drm-intel: (113 commits)
drm/i915: Update DRIVER_DATE to 20180221
drm/i915/fbc: Use PLANE_HAS_FENCE to determine if the plane is fenced
drm/i915/fbdev: Use the PLANE_HAS_FENCE flags from the time of pinning
drm/i915: Move the policy for placement of the GGTT vma into the caller
drm/i915: Also check view->type for a normal GGTT view
drm/i915: Drop WaDoubleCursorLP3Latency:ivb
drm/i915: Set the primary plane pipe select bits on gen4
drm/i915: Don't set cursor pipe select bits on g4x+
drm/i915: Assert that we don't overflow frontbuffer tracking bits
drm/i915: Track number of pending freed objects
drm/i915/: Initialise trans_min for skl_compute_transition_wm()
drm/i915: Clear the in-use marker on execbuf failure
drm/i915: Prune gen8_gt_irq_handler
drm/i915: Track GT interrupt handling using the master iir
drm/i915: Remove WARN_ONCE for failing to pm_runtime_if_in_use
drm: intel_dpio_phy: fix kernel-doc comments at nested struct
drm/i915: Release connector iterator on a digital port conflict.
drm/i915/execlists: Remove too early assert
drm/i915: Assert that we always complete a submission to guc/execlists
drm: move read_domains and write_domain into i915
...
Currently we only check that the plane supports the pixel format of the
fb we're about to feed to it. Extend it to check also the modifier, and
more specifically that the combination of the format and modifier is
supported.
Cc: dri-devel@lists.freedesktop.org
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-8-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
570e86963a ("drm: Widen vblank count to 64-bits [v3]") changed the
return type for drm_crtc_vblank_count() to u64.
The flip ioctl receives a 32-bit target sequence from user space and is
compared against the current sequence from drm_crtc_vblank_count(). So,
typecast return from drm_crtc_vblank_count() explicitly to add clarity.
__drm_crtcs_state.last_vblank_count however only ever stores the value from
drm_crtc_vblank_count() and can be upgraded to u64.
Cc: Keith Packard <keithp@keithp.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-7-dhinakaran.pandiyan@intel.com
We use 32bit bitmasks to track planes/crtcs/encoders/connectors.
Naturally we can only do that if the index of those objects stays
below 32. Issue a warning whenever we exceed that limit, hopefully
prompting someone to fix the problem.
For connectors the issue is a bit more complicated as they can
be created/destroyed at runtime due to MST. So the problem is no
longer a purely theoretical programmer error. As the connector
indexes are allocated via ida, we can simply limit the maximum
value the ida is allowed to hand out. The error handling is already
in place.
v2: Return an error to the caller (Harry)
v3: Print a debug message so that we know what happened (Maarten)
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125133020.23845-1-ville.syrjala@linux.intel.com
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
lock_all_ctx in setplane_internal may return -EINTR, and
__setplane_internal could return -EDEADLK. Making more
special cases for fb would make the code even harder to
read, so the easiest solution is not taking over the fb
refcount, and making callers responsible for dropping
the ref.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102707
Fixes: 13736ba3b3 ("drm/legacy: Convert setplane ioctl locking to interruptible.")
Testcase: kms_atomic_interruptible
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171220093545.613-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We added crtc_id to the atomic ioctl, but forgot to add it for vblank
and page flip events. Commit bd386e5180 ("drm: Reorganize
drm_pending_event to support future event types [v2]") added it to
the vblank event, but page flip event was still missing.
Correct this and add a test for making sure we always set crtc_id correctly.
Fixes: bd386e5180 ("drm: Reorganize drm_pending_event to support future event types [v2]")
Fixes: 5db06a8a98 ("drm: Pass CRTC ID in userspace vblank events")
Cc: Daniel Stone <daniels@collabora.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.12+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #irc
Testcase: igt/kms_vblank/crtc_id
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123103737.47138-1-maarten.lankhorst@linux.intel.com
Attempts to modify un-leased objects are rejected with an error.
Information returned about unleased objects is modified to make them
appear unusable and/or disconnected.
Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>:
* With the change in the __drm_mode_object_find API to pass the
file_priv along, we can now centralize most of the lease-based
access checks in that function.
* A few places skip that API and require in-line checks.
Changes for v3 provided by Dave Airlie <airlied@redhat.com>
* remove support for leasing encoders.
* add support for leasing planes.
Changes for v4
* Only call drm_lease_held if DRIVER_MODESET.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Place drm_event_vblank in a new union that includes that and a bare
drm_event structure. This will allow new members of that union to be
added in the future without changing code related to the existing vbl
event type.
Assignments to the crtc_id field are now done when the event is
allocated, rather than when delievered. This way, delivery doesn't
need to have the crtc ID available.
v2:
* Remove 'dev' argument from create_vblank_event
It wasn't being used anyways, and if we need it in the future,
we can always get it from crtc->dev.
* Check for MODESETTING before looking for crtc in queue_vblank_event
UMS drivers will oops if we try to get a crtc, so make sure
we're modesetting before we try to find a crtc_id to fill into
the event.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit dc695b85fde88eca3ef3b03fcd82f15b6bc6e462)
In order to implement plane leasing we need to count things,
just make the code consistent with the counting code currently
used for counting crtcs/encoders/connectors and drop the need
for num_overlay_planes.
v2: don't forget to assign plane_ptr. (keithp)
v3: use correct bounds check, found by igt.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This will allow __drm_mode_object_file to be extended to perform
access control checks based on the file in use.
v2: Also fix up vboxvideo driver in staging
[airlied: merging early as this is an API change]
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- DP SDP defines (Ville)
- polish for scdc helpers (Thierry Reding)
- fix lifetimes for connector/plane state across crtc changes (Maarten
Lankhorst).
- sparse fixes (Ville+Thierry)
- make legacy kms ioctls all interruptible (Maarten)
- push edid override into the edid helpers (out of probe helpers)
(Jani)
- DP ESI defines for link status (DK)
Driver Changes:
- drm-panel is now in drm-misc!
- minor panel-simple cleanups/refactoring by various folks
- drm_bridge_add cleanup (Inki Dae)
- constify a few i2c_device_id structs (Arvind Yadav)
- More patches from Noralf's fb/gem helper cleanup
- bridge/synopsis: reset fix (Philippe Cornu)
- fix tracepoint include handling in drivers (Thierry)
- rockchip: lvds support (Sandy Huang)
- move sun4i into drm-misc fold (Maxime Ripard)
- sun4i: refactor driver load + support TCON backend/layer muxing
(Chen-Yu Tsai)
- pl111: support more pl11x variants (Linus Walleij)
- bridge/adv7511: robustify probing/edid handling (Lars-Petersen
Clausen)
New hw support:
- S6E63J0X03 panel (Hoegeun Kwon)
- OTM8009A panel (Philippe CORNU)
- Seiko 43WVF1G panel (Marco Franchi)
- tve200 driver (Linus Walleij)
Plus assorted of tiny patches all over, including our first outreachy
patches from applicants for the winter round!
* tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits)
drm: add backwards compatibility support for drm_kms_helper.edid_firmware
drm: handle override and firmware EDID at drm_do_get_edid() level
drm/dp: DPCD register defines for link status within ESI field
drm/rockchip: Replace dev_* with DRM_DEV_*
drm/tinydrm: Drop driver registered message
drm/gem-fb-helper: Use debug message on gem lookup failure
drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
drm/bridge: adv7511: Constify HDMI CODEC platform data
drm/bridge: adv7511: Enable connector polling when no interrupt is specified
drm/bridge: adv7511: Remove private copy of the EDID
drm/bridge: adv7511: Properly update EDID when no EDID was found
drm/crtc: Convert setcrtc ioctl locking to interruptible.
drm/atomic: Convert pageflip ioctl locking to interruptible.
drm/legacy: Convert setplane ioctl locking to interruptible.
drm/legacy: Convert cursor ioctl locking to interruptible.
drm/atomic: Convert atomic ioctl locking to interruptible.
drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2.
drm/tve200: Clean up panel bridging
drm/doc: Update todo.rst
drm/dp/mst: Sideband message transaction to power up/down nodes
...
Pass DRM_MODESET_ACQUIRE_INTERRUPTIBLE to acquire_init, and handle
drm_modeset_backoff which can now fail by returning the error.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170912133749.6532-6-maarten.lankhorst@linux.intel.com
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Pass DRM_MODESET_ACQUIRE_INTERRUPTIBLE to acquire_init, and handle
drm_modeset_backoff which can now fail by returning the error.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170912133749.6532-5-maarten.lankhorst@linux.intel.com
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Pass DRM_MODESET_ACQUIRE_INTERRUPTIBLE to acquire_init, and handle
drm_modeset_backoff which can now fail by returning the error.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170912133749.6532-4-maarten.lankhorst@linux.intel.com
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
-----BEGIN PGP SIGNATURE-----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=5fxW
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 4.14 merge window.
I'm sending this early, as my continuing journey into fatherhood is
occurring really soon now, I'm going to be mostly useless for the next
couple of weeks, though I may be able to read email, I doubt I'll be
doing much patch applications or git sending. If anything urgent pops
up I've asked Daniel/Jani/Alex/Sean to try and direct stuff towards
you.
Outside drm changes:
Some rcar-du updates that touch the V4L tree, all acks should be in
place. It adds one export to the radix tree code for new i915 use
case. There are some minor AGP cleanups (don't see that too often).
Changes to the vbox driver in staging to avoid breaking compilation.
Summary:
core:
- Atomic helper fixes
- Atomic UAPI fixes
- Add YCBCR 4:2:0 support
- Drop set_busid hook
- Refactor fb_helper locking
- Remove a bunch of internal APIs
- Add a bunch of better default handlers
- Format modifier/blob plane property added
- More internal header refactoring
- Make more internal API names consistent
- Enhanced syncobj APIs (wait/signal/reset/create signalled)
bridge:
- Add Synopsys Designware MIPI DSI host bridge driver
tiny:
- Add Pervasive Displays RePaper displays
- Add support for LEGO MINDSTORMS EV3 LCD
i915:
- Lots of GEN10/CNL support patches
- drm syncobj support
- Skylake+ watermark refactoring
- GVT vGPU 48-bit ppgtt support
- GVT performance improvements
- NOA change ioctl
- CCS (color compression) scanout support
- GPU reset improvements
amdgpu:
- Initial hugepage support
- BO migration logic rework
- Vega10 improvements
- Powerplay fixes
- Stop reprogramming the MC
- Fixes for ACP audio on stoney
- SR-IOV fixes/improvements
- Command submission overhead improvements
amdkfd:
- Non-dGPU upstreaming patches
- Scratch VA ioctl
- Image tiling modes
- Update PM4 headers for new firmware
- Drop all BUG_ONs.
nouveau:
- GP108 modesetting support.
- Disable MSI on big endian.
vmwgfx:
- Add fence fd support.
msm:
- Runtime PM improvements
exynos:
- NV12MT support
- Refactor KMS drivers
imx-drm:
- Lock scanout channel to improve memory bw
- Cleanups
etnaviv:
- GEM object population fixes
tegra:
- Prep work for Tegra186 support
- PRIME mmap support
sunxi:
- HDMI support improvements
- HDMI CEC support
omapdrm:
- HDMI hotplug IRQ support
- Big driver cleanup
- OMAP5 DSI support
rcar-du:
- vblank fixes
- VSP1 updates
arcgpu:
- Minor fixes
stm:
- Add STM32 DSI controller driver
dw_hdmi:
- Add support for Rockchip RK3399
- HDMI CEC support
atmel-hlcdc:
- Add 8-bit color support
vc4:
- Atomic fixes
- New ioctl to attach a label to a buffer object
- HDMI CEC support
- Allow userspace to dictate rendering order on submit ioctl"
* tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux: (1074 commits)
drm/syncobj: Add a signal ioctl (v3)
drm/syncobj: Add a reset ioctl (v3)
drm/syncobj: Add a syncobj_array_find helper
drm/syncobj: Allow wait for submit and signal behavior (v5)
drm/syncobj: Add a CREATE_SIGNALED flag
drm/syncobj: Add a callback mechanism for replace_fence (v3)
drm/syncobj: add sync obj wait interface. (v8)
i915: Use drm_syncobj_fence_get
drm/syncobj: Add a race-free drm_syncobj_fence_get helper (v2)
drm/syncobj: Rename fence_get to find_fence
drm: kirin: Add mode_valid logic to avoid mode clocks we can't generate
drm/vmwgfx: Bump the version for fence FD support
drm/vmwgfx: Add export fence to file descriptor support
drm/vmwgfx: Add support for imported Fence File Descriptor
drm/vmwgfx: Prepare to support fence fd
drm/vmwgfx: Fix incorrect command header offset at restart
drm/vmwgfx: Support the NOP_ERROR command
drm/vmwgfx: Restart command buffers after errors
drm/vmwgfx: Move irq bottom half processing to threads
drm/vmwgfx: Don't use drm_irq_[un]install
...
