In the default mode, the current output of the metricgroup include both
events and metrics, which is not necessary and just makes the output
hard to read. Since different ARCHs (even different generations in the
same ARCH) may use different events. The output also vary on different
platforms.
For a metricgroup, only outputting the value of each metric is good
enough.
Add a new field default_metricgroup in evsel to indicate an event of the
default metricgroup. For those events, printout() should print the
metricgroup name rather than each event.
Add perf_stat__skip_metric_event() to skip the evsel in the Default
metricgroup, if it's not running or not the metric event.
Add print_metricgroup_header_t to pass the functions which print the
display name of each metricgroup in the Default metricgroup. Support all
three output methods.
Factor out perf_stat__print_shadow_stats_metricgroup() to print out each
metrics.
On SPR:
Before:
./perf_old stat sleep 1
Performance counter stats for 'sleep 1':
0.54 msec task-clock:u # 0.001 CPUs utilized
0 context-switches:u # 0.000 /sec
0 cpu-migrations:u # 0.000 /sec
68 page-faults:u # 125.445 K/sec
540,970 cycles:u # 0.998 GHz
556,325 instructions:u # 1.03 insn per cycle
123,602 branches:u # 228.018 M/sec
6,889 branch-misses:u # 5.57% of all branches
3,245,820 TOPDOWN.SLOTS:u # 18.4 % tma_backend_bound
# 17.2 % tma_retiring
# 23.1 % tma_bad_speculation
# 41.4 % tma_frontend_bound
564,859 topdown-retiring:u
1,370,999 topdown-fe-bound:u
603,271 topdown-be-bound:u
744,874 topdown-bad-spec:u
12,661 INT_MISC.UOP_DROPPING:u # 23.357 M/sec
1.001798215 seconds time elapsed
0.000193000 seconds user
0.001700000 seconds sys
After:
$ ./perf stat sleep 1
Performance counter stats for 'sleep 1':
0.51 msec task-clock:u # 0.001 CPUs utilized
0 context-switches:u # 0.000 /sec
0 cpu-migrations:u # 0.000 /sec
68 page-faults:u # 132.683 K/sec
545,228 cycles:u # 1.064 GHz
555,509 instructions:u # 1.02 insn per cycle
123,574 branches:u # 241.120 M/sec
6,957 branch-misses:u # 5.63% of all branches
TopdownL1 # 17.5 % tma_backend_bound
# 22.6 % tma_bad_speculation
# 42.7 % tma_frontend_bound
# 17.1 % tma_retiring
TopdownL2 # 21.8 % tma_branch_mispredicts
# 11.5 % tma_core_bound
# 13.4 % tma_fetch_bandwidth
# 29.3 % tma_fetch_latency
# 2.7 % tma_heavy_operations
# 14.5 % tma_light_operations
# 0.8 % tma_machine_clears
# 6.1 % tma_memory_bound
1.001712086 seconds time elapsed
0.000151000 seconds user
0.001618000 seconds sys
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230616031420.3751973-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_pmus__has_hybrid was used to detect when there was >1 core PMU,
this can be achieved with perf_pmus__num_core_pmus that doesn't depend
upon is_pmu_hybrid and PMU name comparisons. When modifying the
function calls take the opportunity to improve comments,
enable/simplify tests that were previously failing for hybrid but now
pass and to simplify generic code.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230527072210.2900565-34-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separate and hide the pmus list in pmus.[ch]. Move pmus functionality
out of pmu.[ch] into pmus.[ch] renaming pmus functions which were
prefixed perf_pmu__ to perf_pmus__.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230527072210.2900565-28-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_pmu__is_hybrid implicitly uses the hybrid PMU list. Instead
return false if hybrid isn't present, if it is then see if any evsel's
PMUs are core.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230527072210.2900565-23-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Function is only used in printout, reduce scope to
stat-display.c. Remove the now empty evlist-hybrid.c and
evlist-hybrid.h.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230527072210.2900565-15-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Processors based on chiplet architecture, such as AMD EPYC and Hygon do
not expose the chiplet details in the sysfs CPU topology information.
However, this information can be derived from the per CPU cache level
information from the sysfs.
'perf stat' has already supported aggregation based on topology
information using core ID, socket ID, etc. It'll be useful to aggregate
based on the cache topology to detect problems like imbalance and
cache-to-cache sharing at various cache levels.
This patch lays the foundation for aggregating data in 'perf stat' based
on the processor's cache topology. The cmdline option to aggregate data
based on the cache topology is added in Patch 4 of the series while this
patch sets up all the necessary functions and variables required to
support the new aggregation option.
The patch also adds support to display per-cache aggregation, or save it
as a JSON or CSV, as splitting it into a separate patch would break
builds when compiling with "-Werror=switch-enum" where the compiler will
complain about the lack of handling for the AGGR_CACHE case in the
output functions.
Committer notes:
Don't use perf_stat_config in tools/perf/util/cpumap.c, this would make
code that is in util/, thus not really specific to a single builtin, use
a specific builtin config structure.
Move the functions introduced in this patch from
tools/perf/util/cpumap.c since it needs access to builtin specific
and is not strictly needed to live in the util/ directory.
With this 'perf test python' is back building.
Suggested-by: Gautham Shenoy <gautham.shenoy@amd.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wen Pu <puwen@hygon.cn>
Link: https://lore.kernel.org/r/20230517172745.5833-3-kprateek.nayak@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Division by zero causes expression parsing to fail and no metric to be
generated. This can mean for short running benchmarks metrics are not
shown. Change the behavior to make the value nan, which gets shown like:
'''
$ perf stat -M TopdownL2 true
Performance counter stats for 'true':
1,031,492 INST_RETIRED.ANY # nan % tma_fetch_bandwidth
# nan % tma_heavy_operations
# nan % tma_light_operations
29,304 CPU_CLK_UNHALTED.REF_XCLK # nan % tma_fetch_latency
# nan % tma_branch_mispredicts
# nan % tma_machine_clears
# nan % tma_core_bound
# nan % tma_memory_bound
2,658,319 IDQ_UOPS_NOT_DELIVERED.CORE
11,167 EXE_ACTIVITY.BOUND_ON_STORES
262,058 EXE_ACTIVITY.1_PORTS_UTIL
<not counted> BR_MISP_RETIRED.ALL_BRANCHES (0.00%)
<not counted> INT_MISC.RECOVERY_CYCLES_ANY (0.00%)
<not counted> CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE (0.00%)
<not counted> CPU_CLK_UNHALTED.THREAD (0.00%)
<not counted> UOPS_RETIRED.RETIRE_SLOTS (0.00%)
<not counted> CYCLE_ACTIVITY.STALLS_MEM_ANY (0.00%)
<not counted> UOPS_RETIRED.MACRO_FUSED (0.00%)
<not counted> IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE (0.00%)
<not counted> EXE_ACTIVITY.2_PORTS_UTIL (0.00%)
<not counted> CYCLE_ACTIVITY.STALLS_TOTAL (0.00%)
<not counted> MACHINE_CLEARS.COUNT (0.00%)
<not counted> UOPS_ISSUED.ANY (0.00%)
0.002864879 seconds time elapsed
0.003012000 seconds user
0.000000000 seconds sys
'''
When events aren't supported a count of 0 can be confusing and make
metrics look meaningful. Change these to be nan also which, with the
next change, gets shown like:
'''
$ perf stat true
Performance counter stats for 'true':
1.25 msec task-clock:u # 0.387 CPUs utilized
0 context-switches:u # 0.000 /sec
0 cpu-migrations:u # 0.000 /sec
46 page-faults:u # 36.702 K/sec
255,942 cycles:u # 0.204 GHz (88.66%)
123,046 instructions:u # 0.48 insn per cycle
28,301 branches:u # 22.580 M/sec
2,489 branch-misses:u # 8.79% of all branches
4,719 CPU_CLK_UNHALTED.REF_XCLK:u # 3.765 M/sec
# nan % tma_frontend_bound
# nan % tma_retiring
# nan % tma_backend_bound
# nan % tma_bad_speculation
344,855 IDQ_UOPS_NOT_DELIVERED.CORE:u # 275.147 M/sec
<not supported> INT_MISC.RECOVERY_CYCLES_ANY:u
<not counted> CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE:u (0.00%)
<not counted> CPU_CLK_UNHALTED.THREAD:u (0.00%)
<not counted> UOPS_RETIRED.RETIRE_SLOTS:u (0.00%)
<not counted> UOPS_ISSUED.ANY:u (0.00%)
0.003238142 seconds time elapsed
0.000000000 seconds user
0.003434000 seconds sys
'''
Ensure that nan metric values are quoted as nan isn't a valid number
in JSON.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230502223851.2234828-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch to use evsel__name() that doesn't return NULL for hardware and
similar events.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230426070050.1315519-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename variables, add a comment and add a cpu_aggr_map__for_each_idx
to aid the readability of the stat-display code. In particular, try to
make sure aggr_idx is used consistently to differentiate from other
kinds of index.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Link: https://lore.kernel.org/r/20230219092848.639226-49-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
runtime_stat is only shared for the sake of tests that don't care
about its value. Move the definition into stat-shadow.c and have the
tests also use the global version.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Link: https://lore.kernel.org/r/20230219092848.639226-48-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current display code for perf stat iterates given cpus and build the
aggr map to collect the event data for the aggregation mode.
But uncore events have their own cpu maps and it won't guarantee that
it'd match to the aggr map. For example, per-package uncore events
would generate a single value for each socket. When user asks per-core
aggregation mode, the output would contain 0 values for other cores.
Thus it needs to check the uncore PMU's cpumask and if it matches to the
current aggregation id.
Before:
$ sudo ./perf stat -a --per-core -e power/energy-pkg/ sleep 1
Performance counter stats for 'system wide':
S0-D0-C0 1 3.73 Joules power/energy-pkg/
S0-D0-C1 0 <not counted> Joules power/energy-pkg/
S0-D0-C2 0 <not counted> Joules power/energy-pkg/
S0-D0-C3 0 <not counted> Joules power/energy-pkg/
1.001404046 seconds time elapsed
Some events weren't counted. Try disabling the NMI watchdog:
echo 0 > /proc/sys/kernel/nmi_watchdog
perf stat ...
echo 1 > /proc/sys/kernel/nmi_watchdog
The core 1, 2 and 3 should not be printed because the event is handled
in a cpu in the core 0 only. With this change, the output becomes like
below.
After:
$ sudo ./perf stat -a --per-core -e power/energy-pkg/ sleep 1
Performance counter stats for 'system wide':
S0-D0-C0 1 2.09 Joules power/energy-pkg/
Fixes: b897613510 ("perf stat: Update event skip condition for system-wide per-thread mode and merged uncore and hybrid events")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Ian Rogers <irogers@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230125192431.2929677-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In print_counter_aggrdata(), it skips some events that has no aggregate
count. It's actually for system-wide per-thread mode and merged uncore
and hybrid events.
Let's update the condition to check them explicitly.
Fixes: 91f85f98da ("perf stat: Display event stats using aggr counts")
Reported-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221206175804.391387-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In this context, 'os' is already a pointer so the extra dereference
isn't required. This fixes the following test failure on aarch64:
$ ./perf test "json output" -vvv
92: perf stat JSON output linter :
--- start ---
Checking json output: no args Test failed for input:
...
Fatal error: glibc detected an invalid stdio handle
---- end ----
perf stat JSON output linter: FAILED!
Fixes: e7f4da3122 ("perf stat: Pass struct outstate to printout()")
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221130111521.334152-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a metric produces more than one values, it missed to print the opening
bracket.
Fixes: ab6baaae27 ("perf stat: Fix JSON output in metric-only mode")
Reported-by: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Weilin Wang <weilin.wang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221202190447.1588680-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 'perf stat' with CSV output option, number of fields in metrics
output is not matching with number of fields in other event output
lines.
Sample output below after applying patch to fix printing os->prefix.
# ./perf stat -x, --per-socket -a -C 1 ls
S0,1,82.11,msec,cpu-clock,82111626,100.00,1.000,CPUs utilized
S0,1,2,,context-switches,82109314,100.00,24.358,/sec
------
====> S0,1,,,,,,,1.71,stalled cycles per insn
The above command line uses field separator as "," via "-x," option and
per-socket option displays socket value as first field. But here the
last line for "stalled cycles per insn" has more separators. Each csv
output line is expected to have 8 field separators (for the 9 fields),
where as last line has 9 "," in the result. Patch fixes this issue.
The counter stats are displayed by function
"perf_stat__print_shadow_stats" in code "util/stat-shadow.c". While
printing the stats info for "stalled cycles per insn", function
"new_line_csv" is used as new_line callback.
The fields printed in each line contains: "Socket_id,aggr
nr,Avg,unit,event_name,run,enable_percent,ratio,unit"
The metric output prints Socket_id, aggr nr, ratio and unit. It has to
skip through remaining five fields ie,
Avg,unit,event_name,run,enable_percent. The csv line callback uses
"os->nfields" to know the number of fields to skip to match with other
lines.
Currently it is set as:
os.nfields = 3 + aggr_fields[config->aggr_mode] + (counter->cgrp ? 1 : 0);
But in case of aggregation modes, csv_sep already gets printed along
with each field (Function "aggr_printout" in util/stat-display.c). So
aggr_fields can be removed from nfields. And fixed number of fields to
skip has to be "4". This is to skip fields for: "avg, unit, event name,
run, enable_percent"
This needs 4 csv separators. Patch removes aggr_fields
and uses 4 as fixed number of os->nfields to skip.
After the patch:
# ./perf stat -x, --per-socket -a -C 1 ls
S0,1,79.08,msec,cpu-clock,79085956,100.00,1.000,CPUs utilized
S0,1,7,,context-switches,79084176,100.00,88.514,/sec
------
====> S0,1,,,,,,0.81,stalled cycles per insn
Fixes: 92a61f6412 ("perf stat: Implement CSV metrics output")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20221205042852.83382-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to check if we have a OS prefix, otherwise we stumble on a
metric segv that I'm now seeing in Arnaldo's tree:
$ gdb --args perf stat -M Backend true
...
Performance counter stats for 'true':
4,712,355 TOPDOWN.SLOTS # 17.3 % tma_core_bound
Program received signal SIGSEGV, Segmentation fault.
__strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77
77 ../sysdeps/x86_64/multiarch/strlen-evex.S: No such file or directory.
(gdb) bt
#0 __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77
#1 0x00007ffff74749a5 in __GI__IO_fputs (str=0x0, fp=0x7ffff75f5680 <_IO_2_1_stderr_>)
#2 0x0000555555779f28 in do_new_line_std (config=0x555555e077c0 <stat_config>, os=0x7fffffffbf10) at util/stat-display.c:356
#3 0x000055555577a081 in print_metric_std (config=0x555555e077c0 <stat_config>, ctx=0x7fffffffbf10, color=0x0, fmt=0x5555558b77b5 "%8.1f", unit=0x7fffffffbb10 "% tma_memory_bound", val=13.165355724442199) at util/stat-display.c:380
#4 0x00005555557768b6 in generic_metric (config=0x555555e077c0 <stat_config>, metric_expr=0x55555593d5b7 "((CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + tma_retiring * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES))"..., metric_events=0x555555f334e0, metric_refs=0x555555ec81d0, name=0x555555f32e80 "TOPDOWN.SLOTS", metric_name=0x555555f26c80 "tma_memory_bound", metric_unit=0x55555593d5b1 "100%", runtime=0, map_idx=0, out=0x7fffffffbd90, st=0x555555e9e620 <rt_stat>) at util/stat-shadow.c:934
#5 0x0000555555778cac in perf_stat__print_shadow_stats (config=0x555555e077c0 <stat_config>, evsel=0x555555f289d0, avg=4712355, map_idx=0, out=0x7fffffffbd90, metric_events=0x555555e078e8 <stat_config+296>, st=0x555555e9e620 <rt_stat>) at util/stat-shadow.c:1329
#6 0x000055555577b6a0 in printout (config=0x555555e077c0 <stat_config>, os=0x7fffffffbf10, uval=4712355, run=325322, ena=325322, noise=4712355, map_idx=0) at util/stat-display.c:741
#7 0x000055555577bc74 in print_counter_aggrdata (config=0x555555e077c0 <stat_config>, counter=0x555555f289d0, s=0, os=0x7fffffffbf10) at util/stat-display.c:838
#8 0x000055555577c1d8 in print_counter (config=0x555555e077c0 <stat_config>, counter=0x555555f289d0, os=0x7fffffffbf10) at util/stat-display.c:957
#9 0x000055555577dba0 in evlist__print_counters (evlist=0x555555ec3610, config=0x555555e077c0 <stat_config>, _target=0x555555e01c80 <target>, ts=0x0, argc=1, argv=0x7fffffffe450) at util/stat-display.c:1413
#10 0x00005555555fc821 in print_counters (ts=0x0, argc=1, argv=0x7fffffffe450) at builtin-stat.c:1040
#11 0x000055555560091a in cmd_stat (argc=1, argv=0x7fffffffe450) at builtin-stat.c:2665
#12 0x00005555556b1eea in run_builtin (p=0x555555e11f70 <commands+336>, argc=4, argv=0x7fffffffe450) at perf.c:322
#13 0x00005555556b2181 in handle_internal_command (argc=4, argv=0x7fffffffe450) at perf.c:376
#14 0x00005555556b22d7 in run_argv (argcp=0x7fffffffe27c, argv=0x7fffffffe270) at perf.c:420
#15 0x00005555556b26ef in main (argc=4, argv=0x7fffffffe450) at perf.c:550
(gdb)
Fixes: f123b2d84e ("perf stat: Remove prefix argument in print_metric_headers()")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: http://lore.kernel.org/lkml/CAP-5=fUOjSM5HajU9TCD6prY39LbX4OQbkEbtKPPGRBPBN=_VQ@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit c4b41b83c2.
As Ian said, the "cpu-count" is not appropriate for uncore events, also it
caused a perf test failure.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221130193613.1046804-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It printed empty strings for each metric. I guess it's needed for CSV
output to match the column number. We could just ignore the empty
metrics in JSON but it ended up with a broken JSON object with a
trailing comma.
So I added a dummy '"metric-value" : "none"' part. To do that, it
needs to pass struct outstate to print_metric_end() to check if any
metric value is printed or not.
Before:
# perf stat -aj --metric-only --per-socket --for-each-cgroup system.slice true
{"socket" : "S0", "cpu-count" : 8, "cgroup" : "system.slice", "" : "", "" : "", "" : "", "" : "", "" : "", "" : "", "" : "", "" : ""}
After:
# perf stat -aj --metric-only --per-socket --for-each-cgroup system.slice true
{"socket" : "S0", "cpu-count" : 8, "cgroup" : "system.slice", "metric-value" : "none"}
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-16-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As the JSON output has been broken for a little while, I guess there are
not many users. Let's rename the field to more intuitive one. :)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-15-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It generated a broken JSON output when aggregation mode or cgroup is
used with --metric-only option. Also get rid of the header line and
make the output single line for each entry.
It needs to know whether the current metric is the first one or not.
So add 'first' field in the outstate and mark it false after printing.
Before:
# perf stat -a -j --metric-only true
{"unit" : "GHz"}{"unit" : "insn per cycle"}{"unit" : "branch-misses of all branches"}
{{"metric-value" : "0.797"}{"metric-value" : "1.65"}{"metric-value" : "0.89"}
^
# perf stat -a -j --metric-only --per-socket true
{"unit" : "GHz"}{"unit" : "insn per cycle"}{"unit" : "branch-misses of all branches"}
{"socket" : "S0", "aggregate-number" : 8, {"metric-value" : "0.295"}{"metric-value" : "1.88"}{"metric-value" : "0.64"}
^
After:
# perf stat -a -j --metric-only true
{"GHz" : "0.990", "insn per cycle" : "2.06", "branch-misses of all branches" : "0.59"}
# perf stat -a -j --metric-only --per-socket true
{"socket" : "S0", "aggregate-number" : 8, "GHz" : "0.439", "insn per cycle" : "2.14", "branch-misses of all branches" : "0.51"}
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-14-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now most of the print functions take a pointer to the struct outstate.
We have one in the evlist__print_counters() and pass it through the
child functions.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It always passes a pointer to rt_stat as it's the only one. Let's not
pass it and directly refer it in the printout().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The printout() takes a lot of arguments and sets an outstate with the
value. Instead, we can fill the outstate first and then pass it to
reduce the number of arguments.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It passes prefix and cgroup pointers but the outstate already has them.
Let's pass the outstate pointer instead.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation for the later cleanup. No functional changes
intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a minor cleanup and preparation for the later change.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It already passes the stat_config argument, then it can find the value in the
config. No need to pass it separately.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It always passes a whitespace to the function, thus we can just add it to the
function body. Furthermore, it's only used in the normal output mode.
Well, actually CSV used it but it doesn't need to since we don't care about the
indentation or alignment in the CSV output.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It should not use sprintf() anymore. Let's pass the buffer size and use the
safer scnprintf() instead.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We don't care about the alignment in the CSV output as it's intended for machine
processing. Let's get rid of it to make the output more compact.
Before:
# perf stat -a --summary -I 1 -x, true
0.001149309,219.20,msec,cpu-clock,219322251,100.00,219.200,CPUs utilized
0.001149309,144,,context-switches,219241902,100.00,656.935,/sec
0.001149309,38,,cpu-migrations,219173705,100.00,173.358,/sec
0.001149309,61,,page-faults,219093635,100.00,278.285,/sec
0.001149309,10679310,,cycles,218746228,100.00,0.049,GHz
0.001149309,6288296,,instructions,218589869,100.00,0.59,insn per cycle
0.001149309,1386904,,branches,218428851,100.00,6.327,M/sec
0.001149309,56863,,branch-misses,218219951,100.00,4.10,of all branches
summary,219.20,msec,cpu-clock,219322251,100.00,20.025,CPUs utilized
summary,144,,context-switches,219241902,100.00,656.935,/sec
summary,38,,cpu-migrations,219173705,100.00,173.358,/sec
summary,61,,page-faults,219093635,100.00,278.285,/sec
summary,10679310,,cycles,218746228,100.00,0.049,GHz
summary,6288296,,instructions,218589869,100.00,0.59,insn per cycle
summary,1386904,,branches,218428851,100.00,6.327,M/sec
summary,56863,,branch-misses,218219951,100.00,4.10,of all branches
After:
0.001148449,224.75,msec,cpu-clock,224870589,100.00,224.747,CPUs utilized
0.001148449,176,,context-switches,224775564,100.00,783.103,/sec
0.001148449,38,,cpu-migrations,224707428,100.00,169.079,/sec
0.001148449,61,,page-faults,224629326,100.00,271.416,/sec
0.001148449,12172071,,cycles,224266368,100.00,0.054,GHz
0.001148449,6901907,,instructions,224108764,100.00,0.57,insn per cycle
0.001148449,1515655,,branches,223946693,100.00,6.744,M/sec
0.001148449,70027,,branch-misses,223735385,100.00,4.62,of all branches
summary,224.75,msec,cpu-clock,224870589,100.00,21.066,CPUs utilized
summary,176,,context-switches,224775564,100.00,783.103,/sec
summary,38,,cpu-migrations,224707428,100.00,169.079,/sec
summary,61,,page-faults,224629326,100.00,271.416,/sec
summary,12172071,,cycles,224266368,100.00,0.054,GHz
summary,6901907,,instructions,224108764,100.00,0.57,insn per cycle
summary,1515655,,branches,223946693,100.00,6.744,M/sec
summary,70027,,branch-misses,223735385,100.00,4.62,of all branches
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It matches to the prefix (interval timestamp), so better to have them together.
No functional change intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221123180208.2068936-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we have events for each cgroup, the metric should be printed for
each cgroup separately. Add print_cgroup_counter() to handle that
situation properly.
Also change print_metric_headers() not to print duplicate headers
by checking cgroups.
$ perf stat -a --for-each-cgroup system.slice,user.slice --metric-only sleep 1
Performance counter stats for 'system wide':
GHz insn per cycle branch-misses of all branches
system.slice 3.792 0.61 3.24%
user.slice 3.661 2.32 0.37%
1.016111516 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-19-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For the metric-only case, add new functions to handle the start and the
end of each metric display.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-18-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The prefix is needed for interval mode to print timestamp at the
beginning of each line. But the it's tricky for the metric only
mode since it doesn't print every evsel and combines the metrics
into a single line.
So it needed to pass 'first' argument to print_counter_aggrdata()
to determine if the current event is being printed at first. This
makes the code hard to read.
Let's move the logic out of the function and do it in the outer
print loop. This would enable further cleanups later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-17-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Likewise, I think it'd better to have the control inside the function, and keep
the higher level function clearer.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-16-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are print_header() and print_interval() to print header lines before
actual counter values. Also print_metric_headers() needs to be called for
the metric-only case.
Let's move all these logics to a single place including num_print_iv to
refresh the headers for interval mode.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-15-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The print would run only if metric_only is not set, but it's already in a
block that says it's in metric_only case. And there's no place to change
the setting.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-14-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of using magic values, define symbolic constants and use them.
Also add aggr_header_std[] array to simplify aggr_mode handling.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This logic does not print the time directly, but it just puts the
timestamp in the buffer as a prefix. To reduce the confusion, factor
out the code into a separate function.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The print_metric_headers() shows metric headers a little bit for each
mode. Split it out to make the code clearer.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Unfortunately, event running time, percentage and noise data are printed
in different positions in normal output than CSV/JSON. I think it's
better to put such details in where it actually prints.
So add before_metric argument to print_noise() and print_running() and
call them twice before and after the metric.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the printout() function, it checks if the event is bad (i.e. not
counted or not supported) and print the result. But it does the same
what abs_printout() is doing. So add an argument to indicate the value
is ok or not and use the same function in both cases.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And split it for each output mode like others. I believe it makes the
code simpler and more intuitive. Now abs_printout() becomes just to
call sub-functions.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The aggr_printout() function is to print aggr_id and count (nr).
Split it for each output mode to simplify the code.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Likewise, split print_cgroup() for each output mode.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Likewise, split print_noise_pct() for each output mode. Although it's
a tiny function, more logic will be added soon so it'd be better split
it and treat it in the same way.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make the code more obvious and hopefully simpler, factor out the
code for each output mode - stdio, CSV, JSON.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221114230227.1255976-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
