Since sched->replay_repeat is set to 10 as default, the sched->run_avg,
sched->runavg_cpu_usage, and sched->runavg_parent_cpu_usage all use
10 to calculate their value.
However, the replay_repeat can be changed to other value by using -r
option, so the calculation above should use replay_repeat to achieve
more accurate results instead of the default value 10.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-10-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The soft maximum number of open files for a calling process is 1024,
which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the
hard maximum number of open files for a calling process is 4096, which
is defined as INR_OPEN_MAX in include/uapi/linux/fs.h.
Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of
RLIMIT_NOFILE in include/asm-generic/resource.h.
And the soft maximum number finally decides the limitation of the
maximum files which are allowed to be opened.
That is to say a process can use at most 1024 file descriptors for its
o pened files, or an EMFILE error will happen.
This error can be fixed by increasing the soft maximum number, under the
constraint that the soft maximum number can not exceed the hard maximum
number, or both soft and hard maximum number should be increased
simultaneously with privilege.
For perf sched replay, it uses sys_perf_event_open to create the file
descriptor for each of the tasks in order to handle information of perf
events.
That is to say each task needs a unique file descriptor. In x86_64,
there may be over 1024 or 4096 tasks correspoinding to the record in
perf.data, which causes that no enough file descriptors can be used.
As a result, EMFILE error happens and stops the replay process. To solve
this problem, we adaptively increase the soft and hard maximum number of
open files with a '-f' option.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
$ cat /proc/sys/fs/file-max
6815744
$ ulimit -Sn
1024
$ ulimit -Hn
4096
Before this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
After this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
Have a try with -f option
$ perf sched replay -f
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
------------------------------------------------------------
#1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21
#2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66
#3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99
#4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67
#5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96
#6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82
#7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39
#8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59
#9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65
#10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since there is sem_wait for each task in the wait_for_tasks(), e.g.
sem_wait(&task->work_done_sem).
The sem_wait can continue only when work_done_sem is greater than 0, or
it will be blocked.
For perf sched replay, one task may sem_post the work_done_sem of
another task, which causes the work_done_sem of that task processed in a
reasonable sequence, e.g. sem_post, sem_wait, sem_wait, sem_post...
This sequence simulates the sched process of the running tasks at the
time when perf sched record runs.
As a result, all the tasks are required and their threads must be
successfully created.
If any one (task A) of the tasks fails to create its thread, then
another task (task B), whose work_done_sem needs sem_post from that
failed task A, may likely block itself due to seg_wait.
And this is a dead halt, since task B's thread_func cannot continue at
all.
To solve this problem, perf sched replay should exit once any task fails
to create its thread.
Example:
Test environment: x86_64 with 160 cores
Before this patch:
$ perf sched replay
...
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
------------------------------------------------------------ <- dead halt
After this patch:
$ perf sched replay
...
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
$
As shown above, perf sched replay finishes the process after printing an
error message and does not block itself.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-7-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The pr_err in self_open_counters() prints error message to stderr.
Unlike stdout, stderr uses memory buffer on the stack of each calling
process.
The pr_err in self_open_counters() works in a thread called thread_func
created in function create_tasks, which concurrently creates
sched->nr_tasks threads.
If the error happens and pr_err prints the error message in each of
these threads, the stack size of the perf process (default is 8192
kbytes) will quickly run out and the segmentation fault will happen
then.
To solve this problem, pr_err with self_open_counters() should be moved
from newly created threads to the old main thread of the perf process.
Then the pr_err can work in a stable situation without the strange
segmentation fault problem.
Example:
Test environment: x86_64 with 160 cores
Before this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Segmentation fault
After this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
...
As shown above, the result continues without any segmentation fault.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-6-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Although the memory of pid_to_task can be allocated via calloc according
to the value of /proc/sys/kernel/pid_max, it cannot handle the case when
pid_max is changed after 'perf sched record' has created its perf.data.
If the new pid_max configured in 'perf sched replay' is smaller than the
old pid_max configured in 'perf sched record', then it will cause the
assertion failure problem.
To solve this problem, we realloc the memory of pid_to_task stepwise
once the passed-in pid parameter in register_pid is larger than the
current pid_max.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
$ perf sched record ls
$ echo 5000 > /proc/sys/kernel/pid_max
$ cat /proc/sys/kernel/pid_max
5000
Before this patch:
$ perf sched replay
run measurement overhead: 221 nsecs
sleep measurement overhead: 55356 nsecs
the run test took 1000011 nsecs
the sleep test took 1060940 nsecs
perf: builtin-sched.c:337: register_pid: Assertion `!(pid >= (unsigned
long)pid_max)' failed.
Aborted
After this patch:
$ perf sched replay
run measurement overhead: 221 nsecs
sleep measurement overhead: 55611 nsecs
the run test took 1000026 nsecs
the sleep test took 1060486 nsecs
nr_run_events: 10
nr_sleep_events: 1562
nr_wakeup_events: 5
task 0 ( :1: 1), nr_events: 1
task 1 ( :2: 2), nr_events: 1
task 2 ( :3: 3), nr_events: 1
task 3 ( :5: 5), nr_events: 1
...
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-5-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current memory allocation of struct task_desc *pid_to_task[MAX_PID]
is in a permanent and preset way, and it has two problems:
Problem 1: If the pid_max, which is the max number of pids in the
system, is much smaller than MAX_PID (1024*1000), then it causes a waste
of stack memory. This may happen in the case where the number of cpu
cores is much smaller than 1000.
Problem 2: If the pid_max is changed from the default value to a value
larger than MAX_PID, then it will cause assertion failure problem. The
maximum value of pid_max can be set to pid_max_max (see pidmap_init
defined in kernel/pid.c), which equals to PID_MAX_LIMIT. In x86_64,
PID_MAX_LIMIT is 4*1024*1024 (defined in include/linux/threads.h). This
value is much larger than MAX_PID, and will take up 32768 Kbytes
(4*1024*1024*8/1024) for memory allocation of pid_to_task, which is much
larger than the default 8192 Kbytes of the stack size of calling
process.
Due to these two problems, we use calloc to allocate the memory of
pid_to_task dynamically.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
$ echo 1025000 > /proc/sys/kernel/pid_max
$ cat /proc/sys/kernel/pid_max
1025000
Run some applications until the pid of some process is greater than
the value of MAX_PID (1024*1000).
Before this patch:
$ perf sched replay
run measurement overhead: 221 nsecs
sleep measurement overhead: 55480 nsecs
the run test took 1000008 nsecs
the sleep test took 1063151 nsecs
perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 1024000)'
failed.
Aborted
After this patch:
$ perf sched replay
run measurement overhead: 221 nsecs
sleep measurement overhead: 55435 nsecs
the run test took 1000004 nsecs
the sleep test took 1059312 nsecs
nr_run_events: 10
nr_sleep_events: 1562
nr_wakeup_events: 5
task 0 ( :1: 1), nr_events: 1
task 1 ( :2: 2), nr_events: 1
task 2 ( :3: 3), nr_events: 1
task 3 ( :5: 5), nr_events: 1
...
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-4-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current MAX_PID is only 65536, which will cause assertion failure problem
when CPU cores are more than 64 in x86_64.
This is because the pid_max value in x86_64 is at least
PIDS_PER_CPU_DEFAULT * num_possible_cpus() (see function pidmap_init
defined in kernel/pid.c), where PIDS_PER_CPU_DEFAULT is 1024 (defined in
include/linux/threads.h).
Thus for MAX_PID = 65536, the correspoinding CPU cores are
65536/1024=64. This is obviously not enough at all for x86_64, and will
cause an assertion failure problem due to BUG_ON(pid >= MAX_PID) in the
codes.
We increase MAX_PID value from 65536 to 1024*1000, which can be used in
x86_64 with 1000 cores.
This number is finally decided according to the limitation of stack size
of calling process.
Use 'ulimit -a', the result shows the stack size of any process is 8192
Kbytes, which is defined in include/uapi/linux/resource.h (#define
_STK_LIM (8*1024*1024)).
Thus we choose a large enough value for MAX_PID, and make it satisfy to
the limitation of the stack size, i.e., making the perf process take up
a memory space just smaller than 8192 Kbytes.
We have calculated and tested that 1024*1000 is OK for MAX_PID.
This means perf sched replay can now be used with at most 1000 cores in
x86_64 without any assertion failure problem.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
Before this patch:
$ perf sched replay
run measurement overhead: 240 nsecs
sleep measurement overhead: 55379 nsecs
the run test took 1000004 nsecs
the sleep test took 1059424 nsecs
perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 65536)'
failed.
Aborted
After this patch:
$ perf sched replay
run measurement overhead: 221 nsecs
sleep measurement overhead: 55397 nsecs
the run test took 999920 nsecs
the sleep test took 1053313 nsecs
nr_run_events: 10
nr_sleep_events: 1562
nr_wakeup_events: 5
task 0 ( :1: 1), nr_events: 1
task 1 ( :2: 2), nr_events: 1
task 2 ( :3: 3), nr_events: 1
task 3 ( :5: 5), nr_events: 1
...
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-3-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is no struct task_task at all, thus it is a typo error in the old
commits, now fix it to what it should be in order to avoid unnecessary
misunderstanding.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-2-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the perf kmem does not respect -i option.
Initializing the file.path properly after options get parsed.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1428298576-9785-2-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently it ignores operator priority and just sets processed args as a
right operand. But it could result in priority inversion in case that
the right operand is also a operator arg and its priority is lower.
For example, following print format is from new kmem events.
"page=%p", REC->pfn != -1UL ? (((struct page *)(0xffffea0000000000UL)) + (REC->pfn)) : ((void *)0)
But this was treated as below:
REC->pfn != ((null - 1UL) ? ((struct page *)0xffffea0000000000UL + REC->pfn) : (void *) 0)
In this case, the right arg was '?' operator which has lower priority.
But it just sets the whole arg so making the output confusing - page was
always 0 or 1 since that's the result of logical operation.
With this patch, it can handle it properly like following:
((REC->pfn != (null - 1UL)) ? ((struct page *)0xffffea0000000000UL + REC->pfn) : (void *) 0)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1428298576-9785-10-git-send-email-namhyung@kernel.org
[ Replaced 'swap' with 'rotate' in a comment as requested by Steve and agreed by Namhyung ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch add checks in places where map__kmap is used to get kmaps
from struct kmap.
Error messages are added at map__kmap to warn invalid accessing of kmap
(for the case of !map->dso->kernel, kmap(map) does not exists at all).
Also, introduces map__kmaps() to warn uninitialized kmaps.
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1428394966-131044-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__mmap_consume() uses perf_mmap__empty() to judge whether
perf_mmap is empty and can be released. But the result is inverted so
fix it.
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1428399071-7141-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable perf data convert to use perf.data when it is not owned by
current user or root.
Example:
# perf record ls
# chown Yunlong.Song:Yunlong.Song perf.data
# ls -al perf.data
-rw------- 1 Yunlong.Song Yunlong.Song 28260 Apr 2 17:35 perf.data
# id
uid=0(root) gid=0(root) groups=0(root),64(pkcs11)
Before this patch:
# perf data convert --to-ctf=./ctf-data/
File perf.data not owned by current user or root (use -f to override)
# perf data convert --to-ctf=./ctf-data/ -f
Error: unknown switch `f'
usage: perf data convert [<options>]
-v, --verbose be more verbose
-i, --input <file> input file name
--to-ctf ... Convert to CTF format
After this patch:
# perf data convert --to-ctf=./ctf-data/
File perf.data not owned by current user or root (use -f to override)
# perf data convert --to-ctf=./ctf-data/ -f
# ls ctf-data/
metadata perf_stream_0
As shown above, the -f option really works now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-11-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable perf trace to use perf.data when it is not owned by current user
or root.
Example:
# perf trace record ls
# chown Yunlong.Song:Yunlong.Song perf.data
# ls -al perf.data
-rw------- 1 Yunlong.Song Yunlong.Song 4153101 Apr 2 15:28 perf.data
# id
uid=0(root) gid=0(root) groups=0(root),64(pkcs11)
Before this patch:
# perf trace -i perf.data
File perf.data not owned by current user or root (use -f to override)
# perf trace -i perf.data -f
Error: unknown switch `f'
usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
--event <event> event selector. use 'perf list' to list
available events
--comm show the thread COMM next to its id
--tool_stats show tool stats
-e, --expr <expr> list of events to trace
-o, --output <file> output file name
-i, --input <file> Analyze events in file
-p, --pid <pid> trace events on existing process id
-t, --tid <tid> trace events on existing thread id
--filter-pids <float>
...
As shown above, the -f option does not work at all.
After this patch:
# perf trace -i perf.data
File perf.data not owned by current user or root (use -f to override)
# perf trace -i perf.data -f
0.056 ( 0.002 ms): ls/47325 brk( ...
0.108 ( 0.018 ms): ls/47325 mmap(len: 4096, prot: READ|WRITE, ...
0.145 ( 0.013 ms): ls/47325 access(filename: 0x7f31259a0eb0, ...
0.172 ( 0.008 ms): ls/47325 open(filename: 0x7fffeb9a0d00, ...
0.180 ( 0.004 ms): ls/47325 stat(filename: 0x7fffeb9a0d00, ...
0.185 ( 0.004 ms): ls/47325 open(filename: 0x7fffeb9a0d00, ...
0.189 ( 0.003 ms): ls/47325 stat(filename: 0x7fffeb9a0d00, ...
0.195 ( 0.004 ms): ls/47325 open(filename: 0x7fffeb9a0d00, ...
0.199 ( 0.002 ms): ls/47325 stat(filename: 0x7fffeb9a0d00, ...
0.205 ( 0.004 ms): ls/47325 open(filename: 0x7fffeb9a0d00, ...
0.211 ( 0.004 ms): ls/47325 stat(filename: 0x7fffeb9a0d00, ...
0.220 ( 0.007 ms): ls/47325 open(filename: 0x7f312599e8ff, ...
...
...
As shown above, the -f option really works now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-10-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable perf timechart to use perf.data when it is not owned by current
user or root.
Example:
# perf timechart record ls
# chown Yunlong.Song:Yunlong.Song perf.data
# ls -al perf.data
-rw------- 1 Yunlong.Song Yunlong.Song 5471744 Apr 2 15:15 perf.data
# id
uid=0(root) gid=0(root) groups=0(root),64(pkcs11)
Before this patch:
# perf timechart
File perf.data not owned by current user or root (use -f to override)
# perf timechart -f
Error: unknown switch `f'
usage: perf timechart [<options>] {record}
-i, --input <file> input file name
-o, --output <file> output file name
-w, --width <n> page width
--highlight <duration or task name>
highlight tasks. Pass duration in ns or process name.
-P, --power-only output power data only
-T, --tasks-only output processes data only
-p, --process <process>
process selector. Pass a pid or process name.
--symfs <directory>
Look for files with symbols relative to this directory
-n, --proc-num <n> min. number of tasks to print
-t, --topology sort CPUs according to topology
--io-skip-eagain skip EAGAIN errors
--io-min-time <time>
all IO faster than min-time will visually appear longer
--io-merge-dist <time>
merge events that are merge-dist us apart
As shown above, the -f option does not work at all.
After this patch:
# perf timechart
File perf.data not owned by current user or root (use -f to override)
# perf timechart -f
Written 0.0 seconds of trace to output.svg.
# cat output.svg
<?xml version="1.0" standalone="no"?>
<!DOCTYPE svg SYSTEM "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
<svg width="1000" height="10110" version="1.1" xmlns="http://www.w3.org/2000/svg">
<defs>
<style type="text/css">
<![CDATA[
rect { stroke-width: 1; }
...
...
As shown above, the -f option really works now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-9-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable perf script to use perf.data when it is not owned by current user
or root. Change the short option name of --fields to -F to avoid confusion
with --force.
Example:
# perf record ls
# chown Yunlong.Song:Yunlong.Song perf.data
# ls -al perf.data
-rw------- 1 Yunlong.Song Yunlong.Song 28360 Apr 2 14:53 perf.data
# id
uid=0(root) gid=0(root) groups=0(root),64(pkcs11)
Before this patch:
# perf script
File perf.data not owned by current user or root (use -f to override)
# perf script -f
Error: switch `f' requires a value
usage: perf script [<options>]
or: perf script [<options>] record <script> [<record-options>] <command>
or: perf script [<options>] report <script> [script-args]
or: perf script [<options>] <script> [<record-options>] <command>
or: perf script [<options>] <top-script> [script-args]
-f, --fields <str> comma separated output fields prepend with
'type:'. Valid types: hw,sw,trace,raw. Fields:
comm,tid,pid,time,cpu,event,trace,ip,sym,dso,addr,symoff,period
As shown above, the -f option does not work at all. And -f is already
taken up by --fields, which makes --force confused, so change the short
option name of --fields to -F like what other perf commands do (e.g.
perf report -F) and use -f as the short option name of --force.
After this patch:
# perf script
File perf.data not owned by current user or root (use -f to override)
# perf script -f
:41298 41298 2590086.564226: 1 cycles: ffffffff8103efc6
native_write_msr_safe ([kernel.kallsyms])
:41298 41298 2590086.564244: 1 cycles: ffffffff8103efc6
native_write_msr_safe ([kernel.kallsyms])
:41298 41298 2590086.564249: 7 cycles: ffffffff8103efc6
native_write_msr_safe ([kernel.kallsyms])
:41298 41298 2590086.564255: 176 cycles: ffffffff8103efc6
native_write_msr_safe ([kernel.kallsyms])
ls 41298 2590086.567346: 4059 cycles: ffffffff8105a592
raise_softirq ([kernel.kallsyms])
ls 41298 2590086.567353: 3717 cycles: ffffffff8105a592
raise_softirq ([kernel.kallsyms])
ls 41298 2590086.567358: 63058 cycles: ffffffff8105a592
raise_softirq ([kernel.kallsyms])
ls 41298 2590086.567448: 1706255 cycles: 406ae0
[unknown] (/usr/bin/ls)
As shown above, the -f option really works now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable perf mem to use perf.data when it is not owned by current user or
root.
Example:
# perf mem -t load record ls
# chown Yunlong.Song:Yunlong.Song perf.data
# ls -al perf.data
-rw------- 1 Yunlong.Song Yunlong.Song 16392 Apr 2 14:34 perf.data
# id
uid=0(root) gid=0(root) groups=0(root),64(pkcs11)
Before this patch:
# perf mem -D report
File perf.data not owned by current user or root (use -f to override)
# perf mem -D -f report
Error: unknown switch `f'
usage: perf mem [<options>] {record|report}
-t, --type <type> memory operations(load,store) Default load,store
-D, --dump-raw-samples
dump raw samples in ASCII
-U, --hide-unresolved
Only display entries resolved to a symbol
-i, --input <file> input file name
-C, --cpu <cpu> list of cpus to profile
-x, --field-separator <separator>
separator for columns, no spaces will be added
between columns '.' is reserved.
As shown above, the -f option does not work at all.
After this patch:
# perf mem -D report
File perf.data not owned by current user or root (use -f to override)
# perf mem -D -f report
# PID, TID, IP, ADDR, LOCAL WEIGHT, DSRC, SYMBOL
39095 39095 0xffffffff81127e40 0x016ffff887f45148338 8 0x68100142
/proc/kcore:perf_event_aux
39095 39095 0xffffffff8100a3fe 0xffff89007f8cb7d0 6 0x68100142
/proc/kcore:native_sched_clock
39095 39095 0xffffffff81309139 0xffff88bf44c9ded8 6 0x68100142
/proc/kcore:acpi_map_lookup
39095 39095 0xffffffff810f8c4c 0xffff89007f8ccd88 6 0x68100142
/proc/kcore:rcu_nmi_exit
39095 39095 0xffffffff81136346 0xffff88fea995dd50 6 0x68100142
/proc/kcore:unlock_page
39095 39095 0xffffffff812a64a2 0xffff88fea995dcc8 6 0x68100142
/proc/kcore:half_md4_transform
39095 39095 0x7f0cf877c7e9 0x25dfb94 6 0x68100142
/lib64/libc-2.19.so:__readdir64
39095 39095 0x7f0cf87575a3 0x7f0cf9163731 6 0x68100142
/lib64/libc-2.19.so:__strcoll_l
39095 39095 0xffffffff8116910e 0xffffea01c1bfbd50 23 0x68100242
/proc/kcore:page_remove_rmap
As shown above, the -f option really works now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-7-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable perf lock to use perf.data when it is not owned by current user
or root.
Example:
# perf lock record ls
# chown Yunlong.Song:Yunlong.Song perf.data
# ls -al perf.data
-rw------- 1 Yunlong.Song Yunlong.Song 4880686 Apr 2 14:14 perf.data
# id
uid=0(root) gid=0(root) groups=0(root),64(pkcs11)
Before this patch:
# perf lock report
File perf.data not owned by current user or root (use -f to override)
Initializing perf session failed
# perf lock report -f
Error: unknown switch `f'
usage: perf lock report [<options>]
-k, --key <acquired> key for sorting (acquired / contended /
avg_wait / wait_total / wait_max / wait_min)
As shown above, the -f option does not work at all.
After this patch:
# perf lock report
File perf.data not owned by current user or root (use -f to override)
Initializing perf session failed
# perf lock report -f
Name acquired contended avg wait (ns) total wait (ns) ...
&ldata->output_l... 128 0 0 0 ...
&ctx->lock 114 0 0 0 ...
&p->pi_lock 112 0 0 0 ...
&(&pool->lock)->... 112 0 0 0 ...
&(&dentry->d_loc... 70 0 0 0 ...
&(&newf->file_lo... 62 0 0 0 ...
&(&fs->lock)->rl... 43 0 0 0 ...
...
As shown above, the -f option really works now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-6-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable perf kvm to use perf.data.guest when it is not owned by current
user or root.
Example:
# perf kvm stat record ls
# chown Yunlong.Song:Yunlong.Song perf.data.guest
# ls -al perf.data.guest
-rw------- 1 Yunlong.Song Yunlong.Song 4128937 Apr 2 11:05 perf.data.guest
# id
uid=0(root) gid=0(root) groups=0(root),64(pkcs11)
Before this patch:
# perf kvm stat report
File perf.data.guest not owned by current user or root (use -f to override)
Initializing perf session failed
# perf kvm stat report -f
Error: unknown switch `f'
usage: perf kvm stat report [<options>]
--event <report event>
event for reporting: vmexit, mmio (x86 only),
ioport (x86 only)
--vcpu <n> vcpu id to report
-k, --key <sort-key> key for sorting: sample(sort by samples
number) time (sort by avg time)
-p, --pid <pid> analyze events only for given process id(s)
As shown above, the -f option does not work at all.
After this patch:
# perf kvm stat report
File perf.data.guest not owned by current user or root (use -f to override)
Initializing perf session failed
# perf kvm stat report -f
Analyze events for all VMs, all VCPUs:
VM-EXIT Samples Samples% Time% Min Time Max Time Avg time
Total Samples:0, Total events handled time:0.00us.
As shown above, the -f option really works now. Since we have not
launched any KVM related process, the result shows 0 sample here.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-5-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable perf kmem to use perf.data when it is not owned by current user
or root.
Example:
# perf kmem record ls
# chown Yunlong.Song:Yunlong.Song perf.data
# ls -al perf.data
-rw------- 1 Yunlong.Song Yunlong.Song 5315665 Apr 2 10:54 perf.data
# id
uid=0(root) gid=0(root) groups=0(root),64(pkcs11)
Before this patch:
# perf kmem stat
File perf.data not owned by current user or root (use -f to override)
# perf kmem stat -f
Error: unknown switch `f'
usage: perf kmem [<options>] {record|stat}
-i, --input <file> input file name
-v, --verbose be more verbose (show symbol address, etc)
--caller show per-callsite statistics
--alloc show per-allocation statistics
-s, --sort <key[,key2...]>
sort by keys: ptr, call_site, bytes, hit,
pingpong, frag
-l, --line <num> show n lines
--raw-ip show raw ip instead of symbol
As shown above, the -f option does not work at all.
After this patch:
# perf kmem stat
File perf.data not owned by current user or root (use -f to override)
# perf kmem stat -f
SUMMARY
=======
Total bytes requested: 437599
Total bytes allocated: 615472
Total bytes wasted on internal fragmentation: 177873
Internal fragmentation: 28.900259%
Cross CPU allocations: 6/1192
As shown above, the -f option really works now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-4-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable perf inject to use perf.data when it is not owned by current user
or root.
Example:
# perf record ls
# chown Yunlong.Song:Yunlong.Song perf.data
# ls -al perf.data
-rw------- 1 Yunlong.Song Yunlong.Song 28260 Apr 2 10:37 perf.data
# id
uid=0(root) gid=0(root) groups=0(root),64(pkcs11)
Before this patch:
# perf inject -v -b -i perf.data -o perf.data.new
File perf.data not owned by current user or root (use -f to override)
# perf inject -v -b -i perf.data -o perf.data.new -f
Error: unknown switch `f'
usage: perf inject [<options>]
-b, --build-ids Inject build-ids into the output stream
-i, --input <file> input file name
-o, --output <file> output file name
-s, --sched-stat Merge sched-stat and sched-switch for getting
events where and how long tasks slept
-v, --verbose be more verbose (show build ids, etc)
--kallsyms <file>
kallsyms pathname
As shown above, the -f option does not work at all.
After this patch:
# perf inject -v -b -i perf.data -o perf.data.new
File perf.data not owned by current user or root (use -f to override)
# perf inject -v -b -i perf.data -o perf.data.new -f
build id event received for [kernel.kallsyms]:
f6dcb66d8b98f1c0d9eb87bf043444b69f91d30c
symsrc__init: cannot get elf header.
Looking at the vmlinux_path (7 entries long)
Using /proc/kcore for kernel object code
Using /proc/kallsyms for symbols
As shown above, the -f option really works now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-3-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable perf evlist to use perf.data when it is not owned by current user
or root.
Example:
# perf record ls
# chown Yunlong.Song:Yunlong.Song perf.data
# ls -al perf.data
-rw------- 1 Yunlong.Song Yunlong.Song 28260 Apr 2 10:18 perf.data
# id
uid=0(root) gid=0(root) groups=0(root),64(pkcs11)
Before this patch:
# perf evlist
File perf.data not owned by current user or root (use -f to override)
# perf evlist -f
Error: unknown switch `f'
usage: perf evlist [<options>]
-i, --input <file> Input file name
-F, --freq Show the sample frequency
-v, --verbose Show all event attr details
-g, --group Show event group information
As shown above, the -f option does not work at all.
After this patch:
# perf evlist
File perf.data not owned by current user or root (use -f to override)
# perf evlist -f
cycles
As shown above, the -f option really works now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-2-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix 'perf probe' to track down unnamed union/structure members.
perf probe did not track down the tree of unnamed union/structure
members, since it just failed to find given "name" in a parent
structure/union. To solve this issue, I've introduced 2 changes.
- Fix die_find_member() to track down the type-DIE if it is
unnamed, and if it contains the specified member, returns the
unnamed member.
(note that we don't return found member, since unnamed member
has the offset in the parent structure)
- Fix convert_variable_fields() to track down the unnamed union/
structure (one-by-one).
With this patch, perf probe can access unnamed fields:
-----
#./perf probe -nfx ./perf lock__delete ops 'locked_ops=ops->locked.ops'
Added new event:
probe_perf:lock__delete (on lock__delete in /home/mhiramat/ksrc/linux-3/tools/perf/perf with ops locked_ops=ops->locked.ops)
You can now use it in all perf tools, such as:
perf record -e probe_perf:lock__delete -aR sleep 1
-----
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Report-Link: https://lkml.org/lkml/2015/3/5/431
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150402073312.14482.37942.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it comes from address_location->thread, that is already stored as
export_sample->al, where the thread can be obtained.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20150402141542.GA9630@kernel.org
Link: http://lkml.kernel.org/n/tip-bzotbl4epoztw0jd6sm2stpf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is available via another parameter, address_location->thread.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: lkml.kernel.org/r/551D08F8.3040706@intel.com
Link: http://lkml.kernel.org/n/tip-6dbn0tcm9hyv92g7h3zj2dbt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is already in the addr_location, so remove the redundant 'thread'
parameter from the callback signatures.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1427906210-10519-3-git-send-email-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We get the thread when we call perf_event__preprocess_sample(), no need
to do it before that.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1427906210-10519-2-git-send-email-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As these can be obtained from the ordered_events pointer, via
container_of, reducing the cross section of ordered_samples.
These were added to ordered_samples in:
commit b7b61cbebd
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Tue Mar 3 11:58:45 2015 -0300
perf ordered_events: Shorten function signatures
By keeping pointers to machines, evlist and tool in ordered_events.
But that was more a transitional patch while moving stuff out from
perf_session.c to ordered_events.c and possibly not even needed by then,
as we could use the container_of() method and instead of having the
nr_unordered_samples stats in events_stats, we can have it in
ordered_samples.
Based-on-a-patch-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4lk0t9js82g0tfc0x1onpkjt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Even when it is not used to actually reorder events, some of its fields
are used, like session->ordered_events->tool, to shorten function
signatures where tool, for instance, was being passed, as the tool is
needed for the ordered_events code, we need it there and might as well
use it for other perf_session needs.
This fixes a problem where 'perf script' had some condition that made
session->ordered_events not to be initialized even with its
script->tool ordered_events related flags asking for it to be, which
looks like another bug and needs to be investigated further.
Always initializing session->ordered_events at least leaves the current
assumptions in place, so do it now.
Reported-by: David Ahern <dsahern@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-b1xxk0rwkz2a0gip1uufmjqg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
363b785f38 added synthesized fork events and set a thread's parent id to
itself. Since we are already processing /proc/<pid>/status the ppid can
be determined properly. Make it so.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Mario <jmario@redhat.com>
Link: http://lkml.kernel.org/r/1427747758-18510-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rather than parsing /proc/pid/status file one line at a time, read it
into a buffer in one shot and search for all strings in one pass.
tgid conversion also simplified -- removing the isspace walk. As noted
by Arnaldo those are not needed for atoi == strtol calls.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Mario <jmario@redhat.com>
Link: http://lkml.kernel.org/r/1427747758-18510-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 2e77784bb7 ("perf callchain: Move cpumode resolve code to
add_callchain_ip") promised "No change in behavior.".
As this commit breaks callchains on s390x (symbols not getting resolved,
observed when profiling the kernel), this statement is wrong. The cpumode
must be kept when iterating over all ips, otherwise the default
(PERF_RECORD_MISC_USER) will be used by error.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1427703060-59883-1-git-send-email-dahi@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Disabling libbabeltrace check by default and replacing the
NO_LIBBABELTRACE make variable with LIBBABELTRACE.
Users wanting the libbabeltrace feature need to build via:
$ make LIBBABELTRACE=1
The reason for this is that the libababeltrace interface we use (version
1.3) hasn't been packaged/released yet, thus the failing feature check
only slows down build and confuses other (non CTF) developers.
Requested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150328103030.GA8431@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Guilherme Cox found that:
There is, however, a potential bug if there is an item with code zero
that is not the first one in the symbol list, since eval_flag(..)
returns 0 when it doesn't find anything.
That is, if you have the following enums:
enum {
FOO_START = 0,
FOO_GO = 1,
FOO_END = 2
}
and then have:
__print_symbolic(foo, FOO_GO, "go", FOO_START, "start",
FOO_END, "end")
If none of the enums are known to pevent, then eval_flag() will return
zero, and it will match it to the first item in the list, which would be
FOO_GO, which is not zero.
Luckily, in most cases, the first element would be zero, and the parsing
would match out of sheer luck.
Reported-by: Guilherme Cox <cox@computer.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150324145813.0bfe95ba@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
commit e596663ebb
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Fri Feb 13 13:22:21 2015 -0300
perf trace: Handle multiple threads better wrt syscalls being intermixed
Introduced a bug where it considered the number of bytes output directly
to the output file when formatting the syscall entry buffer that is
stored to be finally printed at syscall exit, ending up leaving garbage
at the start of syscalls that appeared while another syscall was being
processed, in another thread. Fix it.
Example of garbage in the output before this patch:
4280.102 ( 0.000 ms): lsmd/763 ... [continued]: select()) = 0 Timeout
4280.107 (275.250 ms): tuned/852 select(tvp: 0x7f41f7ffde50 ) ...
4280.109 ( 0.002 ms): lsmd/763 Xl�� ) = -10
4639.197 ( 0.000 ms): systemd-journa/542 ... [continued]: epoll_wait()) = 1
4639.202 (359.088 ms): lsmd/763 select(n: 6, inp: 0x7ffff21daad0, tvp: 0x7ffff21daac0) ...
4639.207 ( 0.005 ms): systemd-journa/542 Hn�� ) = 106
4639.221 ( 0.002 ms): systemd-journa/542 uname(name: 0x7ffdbaed8e00) = 0
4639.271 ( 0.008 ms): systemd-journa/542 ftruncate(fd: 11</run/log/journal/60cd52417cf440a4a80107518bbd3c20/system.journal>, length: 50331648) = 0
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9ckfe8mvsedgkg6y80gz1ul8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Number of JOBS to use is set automatically to the number of processors found
in /proc/cpuinfo. SPARC uses 'CPU' lines rather than 'processor'. Update the
check in perf's Makefile to work for SPARC.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1427213455-127249-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use of a bad filter currently generates the message:
Error: failed to set filter with 22 (Invalid argument)
Add the event name to make it clear to which event the filter
failed to apply:
Error: Failed to set filter "foo" on event sched:sg_lb_stats: 22: Invalid argument
To test it use something like:
# perf record -e sched:sched_switch -e sched:*fork --filter parent_pid==1 -e sched:*wait* --filter bla usleep 1
Error: failed to set filter "bla" on event sched:sched_stat_iowait with 22 (Invalid argument)
#
Based-on-a-patch-by: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d7gq2fjvaecozp9o2i0siifu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf timechart -T on sparc64 is terminating due to SIGBUS. Backtrace:
Program received signal SIGBUS, Bus error.
0x0000000000173d7c in perf_evsel__intval (evsel=<value optimized out>, sample=0x7feffffda28, name=0x289b28 "prev_state")
at util/evsel.c:1918
1918 util/evsel.c: No such file or directory.
in util/evsel.c
Missing separate debuginfos, use: debuginfo-install audit-libs-2.3.7-1.0.1.el6.sparc64 bzip2-libs-1.0.5-7.el6_0.sparc64 elfutils-libelf-0.155-2.0.3.el6.sparc64 elfutils-libs-0.155-2.0.3.el6.sparc64 glibc-2.12-1.132.0.8.el6_5.sparc64 numactl-2.0.7-8.el6.sparc64 python-libs-2.6.6-52.0.2.el6.sparc64 slang-2.2.1-1.el6.sparc64 xz-libs-4.999.9-0.3.beta.20091007git.el6.sparc64 zlib-1.2.3-29.el6.sparc64
(gdb) bt
0 0x0000000000173d7c in perf_evsel__intval (evsel=<value optimized out>, sample=0x7feffffda28,
name=0x289b28 "prev_state") at util/evsel.c:1918
1 0x0000000000123b94 in process_sample_sched_switch (tchart=0x7feffffe040, evsel=0x4ca850, sample=0x7feffffda28,
backtrace=0xc39010 "") at builtin-timechart.c:627
2 0x0000000000122828 in process_sample_event (tool=0x7feffffe040, event=<value optimized out>, sample=0x7feffffda28,
evsel=0x4ca850, machine=0x4c9c88) at builtin-timechart.c:569
Another extended load on unaligned pointer. As before fix by copying to
a temporary variable using memcpy.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Link: http://lkml.kernel.org/r/1427228049-51893-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'record' and 'top' tools already allow a user to specify a CSV of
pids and/or tids of tasks to collect data.
Add those options to the 'report' and 'script' analysis commands to only
consider samples related to the given pids/tids.
This is also inline with the existing comm option.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1427212361-7066-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 6ea22486ba ("tracing: Add array printing helper") trace can
generate traces with variable element size arrays. Add support to
parse them.
Signed-off-by: Javi Merino <javi.merino@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1427195239-15730-1-git-send-email-javi.merino@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
valgrind showed that the filter token wasn't being freed properly in
process_filter().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150324135923.817723903@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For debugging purposes, it may be helpful for the kbuffer library to flag
when crossing a sub buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150324135923.650983637@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a event PADDING is hit (a deleted event that is still in the ring
buffer), translate_data() sets the length of the padding and also updates
the data pointer which is passed back to the caller.
This is unneeded because the caller also updates the data pointer with
the passed back length. translate_data() should not update the pointer,
only set the length.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org # 3.12+
Link: http://lkml.kernel.org/r/20150324135923.461431960@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a plugin option is defined, by default it is a boolean (true or false).
If the option is something else, then it needs to set its "value" field to
a default string other than NULL (can be just "").
If the value is not set then the option is considered boolean, and the
updating of the option value will be handled accordingly.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150324135923.308372986@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a pevent_data_comm_from_pid() that returns the cmdline stored for
a given pid in order for users to map pids to comms, but there's no method
to convert a comm back to a pid. This is useful for filters that specify
a comm instead of a PID (it's faster than searching each individual event).
Add a way to retrieve a comm from a pid. Since there can be more than one
pid associated to a comm, it returns a data structure that lets the user
iterate over all the saved comms for a given pid.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150324135923.001103479@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The %z printf specifier was not handled making trace_printk()s in the
kernel that used this break on output.
Reported-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shawn Bohrer <shawn.bohrer@gmail.com>
Link: http://lkml.kernel.org/r/20150324135922.844361717@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The pevent->trace_clock should not be a direct pointer to what was
given. It should be copied and freed.
Note, valgrind pointed this out when a caller passed in a pointer that
needed to be freed and it never was. Ideally, pevent should copy it
(which this change does), and free the copy. It's up to the caller to
free the clock string passed in.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150324135922.695906738@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is possible that a pid has no associated comm attached to it, although it
can still be passed to pevent_register_comm().
But if comm is NULL, it will cause strdup() to segfault. To prevent this
from happening, if comm is NULL use the default "<...>" name for the
pid.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150324135922.549965495@goodmis.org
Link: http://lkml.kernel.org/p/1403799732-30308-1-git-send-email-jbacik@fb.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before, when some problem happened while trying to load the kernel
symtab, 'perf top' would show:
┌─Warning:───────────────────────────┐
│The vmlinux file can't be used. │
│Kernel samples will not be resolved.│
│ │
│ │
│Press any key... │
└────────────────────────────────────┘
Now, it reports:
# perf top --vmlinux /dev/null
┌─Warning:───────────────────────────────────────────┐
│The /tmp/passwd file can't be used: Invalid ELF file│
│Kernel samples will not be resolved. │
│ │
│ │
│Press any key... │
└────────────────────────────────────────────────────┘
This is possible because we now register the reason for not being able
to load the symtab in the dso->load_errno member, and provide a
dso__strerror_load() routine to format this error into a strerror like
string with a short reason for the error while loading.
That can be just forwarding the dso__strerror_load() call to
strerror_r(), or, for a separate errno range providing a custom message.
Reported-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-u5rb5uq63xqhkfb8uv2lxd5u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To deal with forwarding the strerror_r (GNU) return we need to check if
the returned value is the buffer we passed or maybe some constant
(unknown error), simplify that action by using scnprintf, that will do
all the buflen size checks, trimming if needed.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d0ik6i5gjew56j0qphql28ou@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes this build error with glibc < 2.6.
CC util/cloexec.o
cc1: warnings being treated as errors
util/cloexec.c: In function ‘perf_flag_probe’:
util/cloexec.c:24: error: implicit declaration of function
‘sched_getcpu’
util/cloexec.c:24: error: nested extern declaration of ‘sched_getcpu’
make: *** [util/cloexec.o] Error 1
Signed-off-by: Vinson Lee <vlee@twitter.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: stable@vger.kernel.org # 3.18+
Link: http://lkml.kernel.org/r/1427137761-16119-1-git-send-email-vlee@twopensource.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like perf stat, this makes easy to read the numbers on stat like below:
# perf kmem stat
SUMMARY
=======
Total bytes requested: 9,770,900
Total bytes allocated: 9,782,712
Total bytes wasted on internal fragmentation: 11,812
Internal fragmentation: 0.120744%
Cross CPU allocations: 74/152,819
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1427092244-22764-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sequence of allocating the print_arg field, calling process_arg()
and verifying that the next event delimiter is repeated twice in
process_hex() and will also be used for process_int_array().
Factor it out to a function to avoid writing the same code again and
again.
Signed-off-by: Javi Merino <javi.merino@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1426875176-30244-2-git-send-email-javi.merino@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to get correctly unmapped symbol address on kernel. This allows us
to probe on syscall symbols which are aliases of SyS_ functions with
using debuginfo.
Without this fix:
----
# ./perf probe -a sys_write
Failed to find debug information for address 3b0100
Probe point 'sys_write' not found.
Error: Failed to add events.
----
The address 0x3b0100 is a mapped address, and not usable
in debuginfo.
With this fix:
----
# ./perf probe -a sys_write
Added new event:
probe:sys_write (on sys_write)
You can now use it in all perf tools, such as:
perf record -e probe:sys_write -aR sleep 1
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20150322114022.32639.19096.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When '--sort' is not set, 'perf mem report" will print a null pointer as
the output value of sort order, so fix it.
Example:
Before this patch:
$ perf mem report
# To display the perf.data header info, please use --header/--header-only options.
#
# Samples: 18 of event 'cpu/mem-loads/pp'
# Total weight : 188
# Sort order : (null)
#
...
After this patch:
$ perf mem report
# To display the perf.data header info, please use --header/--header-only options.
#
# Samples: 18 of event 'cpu/mem-loads/pp'
# Total weight : 188
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked
#
...
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427082605-12881-1-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we assume machine__new_module is called only once for each
module so we create its map&dso unconditionally.
However it's possible that it's called multiple times for same module.
Like for perf record:
1) via machine__create_module during machine init
2) via kernel MMAP event processing
Trying to lookup kernel module map before creating one.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kx76xfqpnrpho5hdaapbqm09@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We no longer need the 'compressed' argument, because all
current users use 'NULL' for it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d72q2s7ggbmy2yzhumux4zzw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replacing the current parsing code with kmod_path__parse function call.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r9mpbbgkp39wp1cdmv13ddq0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replacing the file name parsing with kmod_path__parse
and moving the dso update into new separate function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-q0ed76ajcyoaofotntrg5sla@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using kmod_path__parse to get the module name and update the dso short
name within machine__new_dso function.
This way it's done only first time when dso is created, unlike the
current way when we update it all the time we process memory map of the
kernel module.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8gjmt1ggf5ls1xkk7qi2ko4k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separate the dso object addition and update when adding new kernel
module.
Currently we update dso's symtab_type any time we find it in the list,
because we can't distinguish between new and found dso from
__dsos__findnew function.
Adding machine__module_dso that separates finding and adding new dso
objects, so there's no superfluous update of dso.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uvqgs5tyq4wssnq6fm43hgvk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separate the creation of new dso object and its addition to the dsos
list. It will be used in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8j43jod97fdt5dwdsushwwae@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Provides united way of parsing kernel module path
into several components.
The new kmod_path__parse function and few defines:
int __kmod_path__parse(struct kmod_path *m, const char *path,
bool alloc_name, bool alloc_ext);
#define kmod_path__parse(__m, __p) __kmod_path__parse(__m, __p, false, false)
#define kmod_path__parse_name(__m, __p) __kmod_path__parse(__m, __p, true , false)
#define kmod_path__parse_ext(__m, __p) __kmod_path__parse(__m, __p, false, true)
parse kernel module @path and updates @m argument like:
@comp - true if @path contains supported compression suffix,
false otherwise
@kmod - true if @path contains '.ko' suffix in right position,
false otherwise
@name - if (@alloc_name && @kmod) is true, it contains strdup-ed base name
of the kernel module without suffixes, otherwise strudup-ed
base name of @path
@ext - if (@alloc_ext && @comp) is true, it contains strdup-ed string
the compression suffix
It returns 0 if there's no strdup error, -ENOMEM otherwise.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9t6eqg8j610r94l743hkntiv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In short, Fedora compresses kernel modules now (since version 21) with
lzma compression.
Adding lzma decompress support into the dso.c:compressions array
introduced by Namhyung earlier.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2glp65kdtbrk0gblmirsjsnt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used to decompress 'xz' objects. The check detects
the liblzma.so devel library normally delivered by xz package.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Move the calls that frees the resources allocated for a struct format_field to
a separate routine.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1426790181-19118-1-git-send-email-dsahern@gmail.com
[ Split this part from a larger patch, added pevent_ prefix as requested by Steven ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we can annotate entries in a callchain, show which ones have an
associated symbol and samples, by adding a right arrow just before the
symbol name when in verbose mode.
To toggle verbose mode press 'V'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d2rf1p3h5gdp7hdl2gf2bozl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the code skips the first field with the expectation that it is 'nr'.
But older kernels do not have the 'nr' field:
field:int nr; offset:8; size:4; signed:1;
Change perf-trace to drop the field if it exists after parsing the format file.
This fixes the off-by-one problem with older kernels (e.g., RHEL6). e.g,
perf-trace shows this for write:
1.515 ( 0.006 ms): dd/4245 write(buf: 2</dev/pts/0>, count: 140733837536224 ) = 26
where 2 is really the fd, the huge number is really the buf address, etc. With
this patch you get the more appropriate:
1.813 ( 0.003 ms): dd/6330 write(fd: 2</dev/pts/0>, buf: 0x7fff22fc81f0, count: 25) = 25
Based-on-a-patch-by: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gvpdave4u2yq2jnzbcdznpvf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving feature checks code under tools/build directory.
Changing also $feature_dir to point to new feature directory location
and perf Makefiles to include Makefile.feature from new location.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-3lamtb30dhf4wo99y1n8kxg0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Putting feature checks directory into $feature_dir, so it's easy to
configure when we move it to bools/build later.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-sq2nsds6uk93372iyxcqcf6q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move feature related code into separate makefile. The new
Makefile.feature is included from config/Makefile. It will be moved
later into tools/build.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-kj76wphg05x83n6d5ff85ybx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have 2 feature_check functions, which conflict with each other.
Fixing it by renaming the latter to feature_display_check.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <david.ahern@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-wmyccro6qeffseforipu5kcl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The intent of the -s/--summary-only option is to just show a summary of
the system calls and statistics without any of the individual events.
Commit e596663ebb broke that by showing the interrupted lines:
perf trace -i perf.data -s
...
0.741 ( 0.000 ms): sleep/31316 fstat(fd: 4, statbuf: 0x7ffc75ceb830 ) ...
0.744 ( 0.000 ms): sleep/31316 mmap(len: 100244, prot: READ, flags: PRIVATE, fd: 4 ) ...
0.747 ( 0.000 ms): perf/31315 write(fd: 3, buf: 0x7d4bb0, count: 8 ) ...
...
Fix by checking for the summary only option.
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1426789383-19023-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf tries to find probe function addresses from map when debuginfo
could not be found.
To the first added function, the value of ref_reloc_sym was set in
maps__set_kallsyms_ref_reloc_sym() and can be obtained from
host_machine->kmaps->maps. After that, new maps are added to
host_machine->kmaps->maps in dso__load_kcore(), all these new added maps
do not have a valid ref_reloc_sym.
When adding a second function, get_target_map() may get a map without
valid ref_reloc_sym, and raise the error "Relocated base symbol is not
found".
Fix this by using kernel_get_ref_reloc_sym() to get ref_reloc_sym.
This problem can be reproduced as following:
$ perf probe --add='sys_write' --add='sys_open'
Relocated base symbol is not found!
Error: Failed to add events.
After this patch:
$ perf probe --add='sys_write' --add='sys_open'
Added new event:
probe:sys_write (on sys_write)
You can now use it in all perf tools, such as:
perf record -e probe:sys_write -aR sleep 1
Added new event:
probe:sys_open (on sys_open)
You can now use it in all perf tools, such as:
perf record -e probe:sys_open -aR sleep 1
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426816616-2394-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They are all auto-generated files during the perf building.
Before this patch:
$ git status
Untracked files:
(use "git add <file>..." to include in what will be committed)
config/feature-checks/test-all.make.output
config/feature-checks/test-backtrace.make.output
config/feature-checks/test-bionic.make.output
config/feature-checks/test-dwarf.make.output
config/feature-checks/test-fortify-source.make.output
config/feature-checks/test-glibc.make.output
config/feature-checks/test-gtk2-infobar.make.output
config/feature-checks/test-gtk2.make.output
config/feature-checks/test-libaudit.make.output
config/feature-checks/test-libbabeltrace.make.output
config/feature-checks/test-libbfd.make.output
config/feature-checks/test-libdw-dwarf-unwind.make.output
config/feature-checks/test-libelf-getphdrnum.make.output
config/feature-checks/test-libelf-mmap.make.output
config/feature-checks/test-libelf.make.output
config/feature-checks/test-libnuma.make.output
config/feature-checks/test-libperl.make.output
config/feature-checks/test-libpython-version.make.output
config/feature-checks/test-libpython.make.output
config/feature-checks/test-libslang.make.output
config/feature-checks/test-libunwind.make.output
config/feature-checks/test-pthread-attr-setaffinity-np.make.output
config/feature-checks/test-stackprotector-all.make.output
config/feature-checks/test-sync-compare-and-swap.make.output
config/feature-checks/test-timerfd.make.output
config/feature-checks/test-zlib.make.output
After this patch:
$ git status
nothing to commit, working directory clean
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426821638-11227-3-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 4ae61202b3 ("perf build: Rename PERF-FEATURES into
FEATURE-DUMP") renames PERF-FEATURES into FEATURE-DUMP, the .gitignore
file should also do this thing for consistency.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426821638-11227-2-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both 'perf diff' and 'perf mem' have 'field-separator' option, which
causes segfault if passed with empty string. This patch uses previously
introduced 'OPT_STRING_NOEMPTY' option macro to prevent fault.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: pi3orama@163.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1426820272-23302-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
int build_id_cache__add_s(const char *sbuild_id, const char *debugdir,
const char *name, bool is_kallsyms, bool is_vdso)
{
...
if (access(filename, F_OK)) {
^--------------------------------------------------------- [1]
if (is_kallsyms) {
if (copyfile("/proc/kallsyms", filename))
goto out_free;
} else if (link(realname, filename) && copyfile(name, filename))
^-----------------------------^------------- [2]
\------------ [3]
goto out_free;
}
...
When multiple instances of perf record get to [1] at more or less same time and
run access() one or more may get failure because the file does not exist yet
(since the first instance did not have chance to link it yet).
At this point the race moves to link() at [2] where first thread to get
there links file and goes on but second one gets -EEXIST so it runs
copyfile [3] which truncates the file.
reproducer:
rm -rf /root/.debug
for cpu in $(awk '/processor/ {print $3}' /proc/cpuinfo); do
perf record -a -v -T -F 1000 -C $cpu \
-o perf-${cpu}.data sleep 5 2> /dev/null &
done
wait
and simply search for empty files by:
find /lib/modules/`uname -r`/kernel/* -size 0
Signed-off-by: Milos Vyletel <milos@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1426847846-11112-1-git-send-email-milos@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Without this patch, perf report cause segfault if pass "" as '-t':
$ perf report -t ""
# To display the perf.data header info, please use --header/--header-only options.
#
# Samples: 37 of event 'syscalls:sys_enter_write'
# Event count (approx.): 37
#
# Children SelfCommand Shared Object Symbol
Segmentation fault
Since -t is used to add field-separator for generate table, -t "" is
actually meanless. This patch defines a new OPT_STRING_NOEMPTY() option
generator to ensure user never pass empty string to that option.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1426251114-198991-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit f1f13af99a ("perf callchain: Cache eh/debug frame offset for
dwarf unwind") introduces a cache for .debug_frame and .eh_frame_hdr.
Unfortunately, it makes them share a same cache (dso->frame_offset).
Which causes unwind failure on ARM:
$ perf test unwind
Test dwarf unwind: FAILED!
The reason is that, if a dso has '.debug_frame' but doesn't have
'.eh_frame_hdr' (like ARM), dso->frame_offset will be filled by offset
of '.debug_frame' during the first time calling of find_proc_info() ->
read_unwind_spec_debug_frame(), and be regarded to '.eh_frame_hdr' when
the second time calling of find_proc_info() ->
read_unwind_spec_eh_frame(), since '.eh_frame_hdr' is checked prior to
'.debug_frame'.
This patch solves the problem by creating two cache fields for
'.eh_frame_hdr' and '.debug_frame'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/55028BA0.1030701@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since some functions (e.g. '_get_comp_words_by_ref()') in perf bash
completion script are originally taken from git bash completion script,
these functions may be preloaded before perf bash completion script
runs.
In order to avoid repeating loading the same function twice, some test
constraints are used before these function definitions in the perf bash
completion script (e.g. 'type _get_comp_words_by_ref &>/dev/null ||').
The problem is that, if these functions in perf bash completion script
are changed for some reason, perf will still use the preloaded bash
functions rather than the customized functions of its own.
As a result, the perf bash completion will behave incorrectly. To get
rid of this problem, a flag can be defined to determine the proper
situation.
And to avoid overwriting the preloaded functions, the names of these
functions in perf bash completion script should be renamed to the
perf-customized ones.
Example:
Before this patch:
$ type _get_comp_words_by_ref
_get_comp_words_by_ref is a function
_get_comp_words_by_ref ()
{
local exclude flag i OPTIND=1;
local cur cword words=();
local upargs=() upvars=() vcur vcword vprev vwords;
while getopts "c:i:n:p:w:" flag "$@"; do
case $flag in
c)
vcur=$OPTARG
;;
i)
vcword=$OPTARG
;;
n)
exclude=$OPTARG
;;
p)
vprev=$OPTARG
;;
w)
vwords=$OPTARG
;;
esac;
done;
while [[ $# -ge $OPTIND ]]; do
case ${!OPTIND} in
cur)
vcur=cur
;;
prev)
vprev=prev
;;
cword)
vcword=cword
;;
words)
vwords=words
;;
*)
echo "bash: $FUNCNAME(): \`${!OPTIND}': unknown argument" 1>&2;
return 1
;;
esac;
let "OPTIND += 1";
done;
__get_cword_at_cursor_by_ref "$exclude" words cword cur;
[[ -n $vcur ]] && {
upvars+=("$vcur");
upargs+=(-v $vcur "$cur")
};
[[ -n $vcword ]] && {
upvars+=("$vcword");
upargs+=(-v $vcword "$cword")
};
[[ -n $vprev && $cword -ge 1 ]] && {
upvars+=("$vprev");
upargs+=(-v $vprev "${words[cword - 1]}")
};
[[ -n $vwords ]] && {
upvars+=("$vwords");
upargs+=(-a${#words[@]} $vwords "${words[@]}")
};
(( ${#upvars[@]} )) && local "${upvars[@]}" && _upvars "${upargs[@]}"
}
As shown above, the _get_comp_words_by_ref is the preloaded function in
fact, rather than the function defined in perf-completion.sh. So if we
happen to change the function for some reason, the result will behave in
a wrong state.
After this patch:
We can set preload_get_comp_words_by_ref="false" to not use the preloaded
function. Instead, it will use the function defined in perf-completion.sh,
which is renamed as __perf_get_comp_words_by_ref to avoid overwriting
the preloaded function _get_comp_words_by_ref.
$ type __perf_get_comp_words_by_ref
__perf_get_comp_words_by_ref is a function
__perf_get_comp_words_by_ref ()
{
local exclude cur_ words_ cword_;
if [ "$1" = "-n" ]; then
exclude=$2;
shift 2;
fi;
__my_reassemble_comp_words_by_ref "$exclude";
cur_=${words_[cword_]};
while [ $# -gt 0 ]; do
case "$1" in
cur)
cur=$cur_
;;
prev)
prev=${words_[$cword_-1]}
;;
words)
words=("${words_[@]}")
;;
cword)
cword=$cword_
;;
esac;
shift;
done
}
As shown above, the function __perf_get_comp_words_by_ref is loaded and
can work this time.
Note that we do not change the original behavior when those functions are
not preloaded before perf bash completion script runs. In this case,
although the flag is set to "true", the code will still change it to
"false" to use the function defined in perf-completion.sh.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-14-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing subsubcommands for 'perf
trace <TAB>', so fix it.
Example:
Before this patch:
$ perf trace <TAB>
$
As shown above, the subsubcommands of perf trace does not come out.
After this patch:
$ perf trace <TAB>
record
As shown above, the subsubcommands of perf trace can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-13-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing subsubcommands for 'perf
timechart <TAB>', so fix it.
Example:
Before this patch:
$ perf timechart <TAB>
$
As shown above, the subsubcommands of perf timechart does not come out.
After this patch:
$ perf timechart <TAB>
record
As shown above, the subsubcommands of perf timechart can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-12-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing subsubcommands for 'perf
test <TAB>', so fix it.
Example:
Before this patch:
$ perf test <TAB>
$
As shown above, the subsubcommands of perf test does not come out.
After this patch:
$ perf test <TAB>
list
As shown above, the subsubcommands of perf test can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-11-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing subsubcommands for 'perf
script <TAB>', so fix it.
Example:
Before this patch:
$ perf script <TAB>
$
As shown above, the subsubcommands of perf script does not come out.
After this patch:
$ perf script <TAB>
record report
As shown above, the subsubcommands of perf script can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-10-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing subsubcommands for 'perf
help <TAB>', so fix it.
Example:
Before this patch:
$ perf help <TAB>
$
As shown above, the subsubcommands of perf help does not come out.
After this patch:
$ perf help <TAB>
annotate buildid-cache data evlist inject
kvm lock probe report script
test top
bench buildid-list diff help kmem
list mem record sched stat
timechart trace
As shown above, the subsubcommands of perf help can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-9-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing subsubcommands for 'perf
data <TAB>', so fix it.
Example:
Before this patch:
$ perf data <TAB>
$
As shown above, the subsubcommands of perf data does not come out.
After this patch:
$ perf data <TAB>
convert
As shown above, the subsubcommands of perf data can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing subcommands for 'perf
--<long option> <TAB>'.
Example:
Before this patch:
$ perf --debug <TAB>
$
As shown above, the subcommands of perf does not come out.
After this patch:
$ perf --debug <TAB>
annotate buildid-cache data evlist inject
kvm lock probe report script
test top version
bench buildid-list diff help kmem
list mem record sched stat
timechart trace
As shown above, the subcommands of perf can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-7-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion only supports -e rather than --event, so fix it.
Example:
Before this patch:
$ perf record --event <TAB>
$
As shown above, the events of record does not come out.
After this patch:
$ perf record --event <TAB>
lignment-faults cpu/instructions/
L1-dcache-prefetch-misses node-prefetches
uncore_rbox_0/qpi0_idle_filt/
branch-instructions cpu/mem-loads/
L1-dcache-store-misses node-prefetch-misses
uncore_rbox_0/qpi1_date_response/
branch-load-misses cpu-migrations
L1-dcache-stores node-store-misses
uncore_rbox_0/qpi1_filt_send/
branch-loads dTLB-load-misses
L1-icache-load-misses node-stores
uncore_rbox_0/qpi1_idle_filt/
...
As shown above, the events of record can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-6-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing events for 'perf kvm|kmem|
mem|lock|sched record|stat|top -e <TAB>', where 'kvm|kmem|mem|lock|sched'
are all subcommands of perf.
Example:
Before this patch:
$ perf kvm record -e <TAB>
$
As shown above, the events of record does not come out.
After this patch:
$ perf kvm record -e <TAB>
alignment-faults cpu/instructions/
L1-dcache-prefetch-misses node-prefetches
uncore_rbox_0/qpi0_idle_filt/
branch-instructions cpu/mem-loads/
L1-dcache-store-misses node-prefetch-misses
uncore_rbox_0/qpi1_date_response/
branch-load-misses cpu-migrations
L1-dcache-stores node-store-misses
uncore_rbox_0/qpi1_filt_send/
branch-loads dTLB-load-misses
L1-icache-load-misses node-stores
uncore_rbox_0/qpi1_idle_filt/
...
As shown above, the events of record can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-5-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
