Add support for the GLINK flow control signals, and expose this to the
user through the rpmsg_char interface. Add missing kstrdup() failure
handling during allocation of GLINK channel objects.
-----BEGIN PGP SIGNATURE-----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=liDV
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"Add support for the GLINK flow control signals, and expose this to the
user through the rpmsg_char interface. Add missing kstrdup() failure
handling during allocation of GLINK channel objects"
* tag 'rpmsg-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: Avoid dereferencing NULL channel
rpmsg: glink: Add check for kstrdup
rpmsg: char: Add RPMSG GET/SET FLOWCONTROL IOCTL support
rpmsg: glink: Add support to handle signals command
rpmsg: core: Add signal API support
The newly introduced signal command handler checks for non-existing
channel and print an error message, but then continues on to dereference
that same channel.
Instead abort the handler when no channel is found.
Fixes: a2b73aa512 ("rpmsg: glink: Add support to handle signals command")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202307160800.sb7gMnL6-lkp@intel.com/
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230717165538.1542034-1-quic_bjorande@quicinc.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.
Fixes: b4f8e52b89 ("rpmsg: Introduce Qualcomm RPM glink driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230619030631.12361-1-jiasheng@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Remote peripherals send signal notifications over glink with commandID 15.
Add support to send and receive the signal command and based signals
enable or disable flow control with remote host.
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Deepak Kumar Singh <quic_deesin@quicinc.com>
Signed-off-by: Sarannya S <quic_sarannya@quicinc.com>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/1688679698-31274-3-git-send-email-quic_sarannya@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some transports like Glink support the state notifications between
clients using flow control signals similar to serial protocol signals.
Local glink client drivers can send and receive flow control status
to glink clients running on remote processors.
Add APIs to support sending and receiving of flow control status by
rpmsg clients.
Signed-off-by: Deepak Kumar Singh <quic_deesin@quicinc.com>
Signed-off-by: Sarannya S <quic_sarannya@quicinc.com>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/1688679698-31274-2-git-send-email-quic_sarannya@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rather than looking up a dummy item from SMEM, use the new
qcom_smem_is_available() function to make the code more clear
(and reduce the overhead slightly).
Add the same check to qcom_smd_register_edge() as well to ensure that
it only succeeds if SMEM is already available - if a driver calls the
function and SMEM is not available yet then the initial state will be
read incorrectly and the RPMSG devices might never become available.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-8-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
Rather than duplicating most of the code for constructing the initial
TX_DATA and subsequent TX_DATA_CONT packets, roll them into a single
loop.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230418163018.785524-3-quic_bjorande@quicinc.com
As support for splitting transmission over several messages using
TX_DATA_CONT was introduced it does not immediately return the return
value of qcom_glink_tx().
The result is that in the intentless case (i.e. intent == NULL), the
code will continue to send all additional chunks. This is wasteful, and
it's possible that the send operation could incorrectly indicate
success, if the last chunk fits in the TX fifo.
Fix the condition.
Fixes: 8956927fae ("rpmsg: glink: Add TX_DATA_CONT command while sending")
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230418163018.785524-2-quic_bjorande@quicinc.com
In some implementations of the remote firmware, an intent request
acknowledgment is sent when it's determined if the intent allocation
will be fulfilled, but then the intent is queued after the
acknowledgment.
The result is that upon receiving a granted allocation request, the
search for the newly allocated intent will fail and an additional
request will be made. This will at best waste memory, but if the second
request is rejected the transaction will be incorrectly rejected.
Take the incoming intent into account in the wait to mitigate this
problem.
The above scenario can still happen, in the case that, on that same
channel, an unrelated intent is delivered prior to the request
acknowledgment and a separate process enters the send path and picks up
the intent. Given that there's no relationship between the
acknowledgment and the delivered (or to be delivered intent), there
doesn't seem to be a solution to this problem.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
[bjorn: Fixed spelling issues pointed out by checkpatch in commit message]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327144617.3134175-3-quic_bjorande@quicinc.com
Transition the intent request acknowledgement to use a wait queue so
that it's possible, in the next commit, to extend the wait to also wait
for an incoming intent.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327144617.3134175-2-quic_bjorande@quicinc.com
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
qcom_smd_remove() always returned zero, though that isn't completely
trivial to see. So explain that in a comment and convert to
.remove_new().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230321154039.355098-4-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230321154039.355098-3-u.kleine-koenig@pengutronix.de
This function returned zero unconditionally. Convert it to return no
value instead. This makes it more obvious what happens in the callers.
One caller is converted to return zero explicitly. The only other caller
(smd_subdev_stop() in drivers/remoteproc/qcom_common.c) already ignored
the return value before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230321154039.355098-2-u.kleine-koenig@pengutronix.de
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rpmsg ctrl and char driver locking is ensure ordering in cases where the
communication link is being torn down in parallel with calls to open(2)
or poll(2).
The glink driver is refactored, to move rpm/smem-specifics out of the
common logic and better suite further improvements, such as transports
without a mailbox controller. The handling of remoteproc shutdown is
improved, to fail clients immediately instead of having them to wait for
timeouts. A driver_override memory leak is corrected and a few spelling
improvements are introduced.
glink_ssr is transitioned off strlcpy() and "gpr" is added as a valid
child node of the glink-edge DT binding.
-----BEGIN PGP SIGNATURE-----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=0w8J
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
- rpmsg ctrl and char driver locking is ensure ordering in cases where
the communication link is being torn down in parallel with calls to
open(2) or poll(2)
- The glink driver is refactored, to move rpm/smem-specifics out of the
common logic and better suite further improvements, such as
transports without a mailbox controller. The handling of remoteproc
shutdown is improved, to fail clients immediately instead of having
them to wait for timeouts. A driver_override memory leak is corrected
and a few spelling improvements are introduced
- glink_ssr is transitioned off strlcpy() and "gpr" is added as a valid
child node of the glink-edge DT binding
* tag 'rpmsg-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: Release driver_override
rpmsg: glink: Avoid infinite loop on intent for missing channel
rpmsg: glink: Fix GLINK command prefix
rpmsg: glink: Fix spelling of peek
rpmsg: glink: Cancel pending intent requests at removal
rpmsg: glink: Fail qcom_glink_tx() once remove has been initiated
rpmsg: glink: Move irq and mbox handling to transports
rpmsg: glink: rpm: Wrap driver context
rpmsg: glink: smem: Wrap driver context
rpmsg: glink: Extract tx kick operation
rpmsg: glink: Include types in qcom_glink_native.h
rpmsg: ctrl: Add lock to rpmsg_ctrldev_remove
rpmsg: char: Add lock to avoid race when rpmsg device is released
rpmsg: move from strlcpy with unused retval to strscpy
dt-bindings: remoteproc: qcom,glink-edge: add GPR node
Upon termination of the rpmsg_device, driver_override needs to be freed
to avoid leaking the potentially assigned string.
Fixes: 42cd402b8f ("rpmsg: Fix kfree() of static memory on setting driver_override")
Fixes: 39e47767ec ("rpmsg: Add driver_override device attribute for rpmsg_device")
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109223931.1706429-1-quic_bjorande@quicinc.com
In the event that an intent advertisement arrives on an unknown channel
the fifo is not advanced, resulting in the same message being handled
over and over.
Fixes: dacbb35e93 ("rpmsg: glink: Receive and store the remote intent buffers")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230214234231.2069751-1-quic_bjorande@quicinc.com
The upstream GLINK driver was first introduced to communicate with the
RPM on MSM8996, presumably as an artifact from that era the command
defines was prefixed RPM_CMD, while they actually are GLINK_CMDs.
Let's rename these, to keep things tidy. No functional change.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230214225933.2025595-1-quic_bjorande@quicinc.com
The code is peeking into the buffers, not peaking. Fix this throughout
the glink drivers.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230214224746.1996130-1-quic_bjorande@quicinc.com
During removal of the glink edge interrupts are disabled and no more
incoming messages are being serviced. In addition to the remote endpoint
being defunct that means that any outstanding requests for intents will
not be serviced, and qcom_glink_request_intent() will blindly wait for
up to 10 seconds.
Mark the intent request as not granted and complete the intent request
completion to fail the waiting client immediately.
Once the current intent request is failed, any potential clients waiting
for the intent request mutex will not enter the same wait, as the
qcom_glink_tx() call will fail fast.
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213155215.1237059-7-quic_bjorande@quicinc.com
Upon removing the glink edge, communication is at best one-way. This
means that the very common scenario of glink requesting intents will not
be possible to serve.
Typically a successful transmission results in the client waiting for a
response, with some timeout and a mechanism for aborting that timeout.
Because of this, once the glink edge is defunct once removal is
commenced it's better to fail transmissions fast.
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213155215.1237059-6-quic_bjorande@quicinc.com
Not all GLINK transports uses an interrupt and a mailbox instance. The
interrupt for RPM needs to be IRQF_NOSUSPEND, while it seems reasonable
for the SMEM interrupt to use irq_set_wake. The glink struct device is
constructed in the SMEM and RPM drivers but torn down in the core
driver.
Move the interrupt and kick handling into the SMEM and RPM driver, to
improve this and facilitate further improvements.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213155215.1237059-5-quic_bjorande@quicinc.com
As with the SMEM driver update, wrap the RPM context in a struct to
facilitate the upcoming changes of moving IRQ and mailbox registration
to the driver.
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213155215.1237059-4-quic_bjorande@quicinc.com
The Glink SMEM driver allocates a struct device and hangs two
devres-allocated pipe objects thereon. To facilitate the move of
interrupt and mailbox handling to the driver, introduce a wrapper object
capturing the device, glink reference and remote processor id.
The type of the remoteproc reference is updated, as these are
specifically targeting the SMEM implementation.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213155215.1237059-3-quic_bjorande@quicinc.com
Refactor out the tx kick operations to its own function, in preparation
for pushing the details to the individual transports.
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213155215.1237059-2-quic_bjorande@quicinc.com
The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ensure that the used data types are available in qcom_glink_native.h, to
silence LSP warnings.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109223745.1706152-1-quic_bjorande@quicinc.com
Call to rpmsg_ctrldev_ioctl() and rpmsg_ctrldev_remove() must be synchronized.
In present code rpmsg_ctrldev_remove() is not protected with lock, therefore
new char device creation can succeed through rpmsg_ctrldev_ioctl() call. At the
same time call to rpmsg_ctrldev_remove() function for ctrl device removal will
free associated rpdev device. As char device creation already succeeded, user
space is free to issue open() call which maps to rpmsg_create_ept() in kernel.
rpmsg_create_ept() function tries to reference rpdev which has already been
freed through rpmsg_ctrldev_remove(). Issue is predominantly seen in aggressive
reboot tests where rpmsg_ctrldev_ioctl() and rpmsg_ctrldev_remove() can race with
each other.
Adding lock in rpmsg_ctrldev_remove() avoids any new char device creation
through rpmsg_ctrldev_ioctl() while remove call is already in progress.
Signed-off-by: Deepak Kumar Singh <quic_deesin@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1663584840-15762-3-git-send-email-quic_deesin@quicinc.com
When remote host goes down glink char device channel is freed and
associated rpdev is destroyed through rpmsg_chrdev_eptdev_destroy(),
At the same time user space apps can still try to open/poll rpmsg
char device which will result in calling rpmsg_create_ept()/rpmsg_poll().
These functions will try to reference rpdev which has already been freed
through rpmsg_chrdev_eptdev_destroy().
File operation functions and device removal function must be protected
with lock. This patch adds existing ept lock in remove function as well.
Signed-off-by: Deepak Kumar Singh <quic_deesin@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1663584840-15762-2-git-send-email-quic_deesin@quicinc.com
The rpmsg_dev_remove() in rpmsg_core is the place for releasing
this default endpoint.
So need to avoid destroying the default endpoint in
rpmsg_chrdev_eptdev_destroy(), this should be the same as
rpmsg_eptdev_release(). Otherwise there will be double destroy
issue that ept->refcount report warning:
refcount_t: underflow; use-after-free.
Call trace:
refcount_warn_saturate+0xf8/0x150
virtio_rpmsg_destroy_ept+0xd4/0xec
rpmsg_dev_remove+0x60/0x70
The issue can be reproduced by stopping remoteproc before
closing the /dev/rpmsgX.
Fixes: bea9b79c2d ("rpmsg: char: Add possibility to use default endpoint of the rpmsg device")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1663725523-6514-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Return the value rpmsg_chrdev_eptdev_add() directly instead of storing it
in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220826071954.252485-1-ye.xingchen@zte.com.cn
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Fixes: 53e2822e56 ("rpmsg: Introduce Qualcomm SMD backend")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220511120737.57374-1-linmq006@gmail.com
Correct kerneldoc warnings like:
drivers/rpmsg/qcom_glink_ssr.c:45:
warning: expecting prototype for G(). Prototype was for GLINK_SSR_DO_CLEANUP() instead
Also fix meaning of 'flag' argument.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519073330.7187-3-krzysztof.kozlowski@linaro.org
The qcom_glink.name is read from DTS but never used further, never
referenced, so drop it. This also fixes kerneldoc warning:
drivers/rpmsg/qcom_glink_native.c:125:
warning: Function parameter or member 'name' not described in 'qcom_glink'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519073330.7187-2-krzysztof.kozlowski@linaro.org
The use of strncpy() is considered deprecated for NUL-terminated
strings[1]. Replace strncpy() with strscpy_pad(), to keep existing
pad-behavior of strncpy, similarly to commit 08de420a80 ("rpmsg:
glink: Replace strncpy() with strscpy_pad()"). This fixes W=1 warning:
In function ‘qcom_glink_rx_close’,
inlined from ‘qcom_glink_work’ at ../drivers/rpmsg/qcom_glink_native.c:1638:4:
drivers/rpmsg/qcom_glink_native.c:1549:17: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
1549 | strncpy(chinfo.name, channel->name, sizeof(chinfo.name));
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519073330.7187-1-krzysztof.kozlowski@linaro.org
rpmsg_register_device_override need to call put_device to free vch when
driver_set_override fails.
Fix this by adding a put_device() to the error path.
Fixes: bb17d110cb ("rpmsg: Fix calling device_lock() on non-initialized device")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220624024120.11576-1-hbh25y@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The parameter associated to the announce_create and
announce_destroy ops functions is not an endpoint but a rpmsg device.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20220425071723.774050-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
There is no mutex protection for rpmsg_eptdev_open(),
especially for eptdev->ept read and write operation.
It may cause issues when multiple instances call
rpmsg_eptdev_open() in parallel,the return state
may be success or EBUSY.
Fixes: 964e8bedd5 ("rpmsg: char: Return an error if device already open")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1653104105-16779-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Here is the set of driver core changes for 5.19-rc1.
Note, I'm not really happy with this pull request as-is, see below for
details, but overall this is all good for everything but a small set of
systems, which we have a fix for already.
Lots of tiny driver core changes and cleanups happened this cycle,
but the two major things were:
- firmware_loader reorganization and additions including the
ability to have XZ compressed firmware images and the ability
for userspace to initiate the firmware load when it needs to,
instead of being always initiated by the kernel. FPGA devices
specifically want this ability to have their firmware changed
over the lifetime of the system boot, and this allows them to
work without having to come up with yet-another-custom-uapi
interface for loading firmware for them.
- physical location support added to sysfs so that devices that
know this information, can tell userspace where they are
located in a common way. Some ACPI devices already support
this today, and more bus types should support this in the
future.
Smaller changes included:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten any
linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request if you want to take them directly, _OR_ I can just revert
the probe timeout changes and they can wait for the next -rc1 merge
cycle. Given that the fixes are tested, and pretty simple, I'm leaning
toward that choice. Sorry this all came at the end of the merge window,
I should have resolved this all 2 weeks ago, that's my fault as it was
in the middle of some travel for me.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time outs.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnv/A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk/fACgvmenbo5HipqyHnOmTQlT50xQ9EYAn2eTq6ai
GkjLXBGNWOPBa5cU52qf
=yEi/
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
driver_set_override() helper uses device_lock() so it should not be
called before rpmsg_register_device() (which calls device_register()).
Effect can be seen with CONFIG_DEBUG_MUTEXES:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 57 at kernel/locking/mutex.c:582 __mutex_lock+0x1ec/0x430
...
Call trace:
__mutex_lock+0x1ec/0x430
mutex_lock_nested+0x44/0x50
driver_set_override+0x124/0x150
qcom_glink_native_probe+0x30c/0x3b0
glink_rpm_probe+0x274/0x350
platform_probe+0x6c/0xe0
really_probe+0x17c/0x3d0
__driver_probe_device+0x114/0x190
driver_probe_device+0x3c/0xf0
...
Refactor the rpmsg_register_device() function to use two-step device
registering (initialization + add) and call driver_set_override() in
proper moment.
This moves the code around, so while at it also NULL-ify the
rpdev->driver_override in error path to be sure it won't be kfree()
second time.
Fixes: 42cd402b8f ("rpmsg: Fix kfree() of static memory on setting driver_override")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220429195946.1061725-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
irq_of_parse_and_map() returns 0 on failure, so this should not be
passed further as error return code.
Fixes: 1a358d3506 ("rpmsg: qcom_smd: Fix irq_of_parse_and_map() return value")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220423093932.32136-1-krzysztof.kozlowski@linaro.org
Unregister the rpmsg_ctrl device instead of just freeing the
the virtio_rpmsg_channel structure.
This will properly unregister the device and call
virtio_rpmsg_release_device() that frees the structure.
Fixes: c486682ae1 ("rpmsg: virtio: Register the rpmsg_char device")
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220426060536.15594-4-hbh25y@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
vch will be free in virtio_rpmsg_release_device() when
rpmsg_ctrldev_register_device() fails. There is no need to call
kfree() again.
Fixes: c486682ae1 ("rpmsg: virtio: Register the rpmsg_char device")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Tested-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20220426060536.15594-3-hbh25y@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
