Commit Graph

4805 Commits

Author SHA1 Message Date
Linus Torvalds
ca4e7c5120 The large diff this time around is from the addition of a new clk driver
for the TI Davinci family of SoCs. So far those clks have been supported
 with a custom implementation of the clk API in the arch port instead of in
 the CCF. With this driver merged we're one step closer to having a single
 clk API implementation.
 
 The other large diff is from the Amlogic clk driver that underwent some
 major surgery to use regmap. Beyond that, the biggest hitter is Samsung
 which needed some reworks to properly handle clk provider power domains
 and a bunch of PLL rate updates.
 
 The core framework was fairly quiet this round, just getting some cleanups
 and small fixes for some of the more esoteric features. And the usual
 set of driver non-critical fixes, cleanups, and minor additions are here as
 well.
 
 Core:
  - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops
  - debugfs ops macroized to shave some lines of boilerplate code
  - Always calculate the phase instead of caching it in clk_get_phase()
  - More __must_check on bulk clk APIs
 
 New Drivers:
  - TI's Davinci family of SoCs
  - Intel's Stratix10 SoC
  - stm32mp157 SoC
  - Allwinner H6 CCU
  - Silicon Labs SI544 clock generator chip
  - Renesas R-Car M3-N and V3H SoCs
  - i.MX6SLL SoCs
 
 Removed Drivers:
  - ST-Ericsson AB8540/9540
 
 Updates:
  - Mediatek MT2701 and MT7622 audsys support and MT2712 updates
  - STM32F469 DSI and STM32F769 sdmmc2 support
  - GPIO clks can sleep now
  - Spreadtrum SC9860 RTC clks
  - Nvidia Tegra MBIST workarounds and various minor fixes
  - Rockchip phase handling fixes and a memory leak plugged
  - Renesas drivers switch to readl/writel from clk_readl/clk_writel
  - Renesas gained CPU (Z/Z2) and watchdog support
  - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support
  - Qualcomm PM8921 PMIC XO buffers
  - Amlogic migrates to regmap APIs
  - TI Keystone clk latching support
  - Allwinner H3 and H5 video clk fixes
  - Broadcom BCM2835 PLLs needed another bit to enable
  - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix
  - i.MX6UL/ULL epdc_podf support
  - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlrPhMARHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSVkkxAArsItSoxQV18kQlJ9S7o2z75giquXQfvy
 Y/cKIIY1kz4K+qm+rpbl6PjukrSPtfM+wGmepGt+CptOdlj672viFxI7zjrd1iSy
 /xJo7d5/nZxvmx0qcwYWVTCOsU+4FUUkpq5mE91KEvwny/qgRqEgWeLoWTDLBktF
 MzGtBUYudjkRYLd2I31DGB3dqI0Dy9JwuEpJfCAt5h4dztml3aNjYknjQ/vUSEXL
 61mSYM1fwzK8rnrjSlQqb+X0OoJ6d5Pz2uHRXnWfGlS8UOh5N9NFGKpiErLm+h/+
 /FigA6f9HBeUneNf5Dnu568FHwE2FyUbZKVd40OYj3x128OnAoKUoRt68/8FQPdf
 NoQb3zH3Ha1JbwWgvQ9RkWp82kYnMctrlkh6IFye/FxdfwCWA4SE/iIgJXRJbQ/K
 blZz14jkXT8oISqy6nryGv3CK/RFXzVdvVa4z41xHc4cnLpNBsv1o89a+9MyTvMD
 wYOnc/98/l5xYs5PvQqNrd/onE0GLIeOEtkWNXH0OACe6FOIuz5eVn4Uh8aIm0wl
 +EHwHRwB7AQK+a7jwEfQ88aceAntvFlymUUcsncyCXn2s0knc5BHJPSHhoZk1tJb
 Wv2Fcln3Mwjhhq9aoNxfAJf4pIqmFgdQEtwyND4GJlP55Xay5QMZVEdwnNfFDvmf
 X6P2pfkBqkg=
 =ys4O
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The large diff this time around is from the addition of a new clk
  driver for the TI Davinci family of SoCs. So far those clks have been
  supported with a custom implementation of the clk API in the arch port
  instead of in the CCF. With this driver merged we're one step closer
  to having a single clk API implementation.

  The other large diff is from the Amlogic clk driver that underwent
  some major surgery to use regmap. Beyond that, the biggest hitter is
  Samsung which needed some reworks to properly handle clk provider
  power domains and a bunch of PLL rate updates.

  The core framework was fairly quiet this round, just getting some
  cleanups and small fixes for some of the more esoteric features. And
  the usual set of driver non-critical fixes, cleanups, and minor
  additions are here as well.

  Core:
   - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops
   - debugfs ops macroized to shave some lines of boilerplate code
   - Always calculate the phase instead of caching it in clk_get_phase()
   - More __must_check on bulk clk APIs

  New Drivers:
   - TI's Davinci family of SoCs
   - Intel's Stratix10 SoC
   - stm32mp157 SoC
   - Allwinner H6 CCU
   - Silicon Labs SI544 clock generator chip
   - Renesas R-Car M3-N and V3H SoCs
   - i.MX6SLL SoCs

  Removed Drivers:
   - ST-Ericsson AB8540/9540

  Updates:
   - Mediatek MT2701 and MT7622 audsys support and MT2712 updates
   - STM32F469 DSI and STM32F769 sdmmc2 support
   - GPIO clks can sleep now
   - Spreadtrum SC9860 RTC clks
   - Nvidia Tegra MBIST workarounds and various minor fixes
   - Rockchip phase handling fixes and a memory leak plugged
   - Renesas drivers switch to readl/writel from clk_readl/clk_writel
   - Renesas gained CPU (Z/Z2) and watchdog support
   - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support
   - Qualcomm PM8921 PMIC XO buffers
   - Amlogic migrates to regmap APIs
   - TI Keystone clk latching support
   - Allwinner H3 and H5 video clk fixes
   - Broadcom BCM2835 PLLs needed another bit to enable
   - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix
   - i.MX6UL/ULL epdc_podf support
   - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits)
  clk: davinci: add a reset lookup table for psc0
  clk: imx: add clock driver for imx6sll
  dt-bindings: imx: update clock doc for imx6sll
  clk: imx: add new gate/gate2 wrapper funtion
  clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux
  clk: cs2000: set pm_ops in hibernate-compatible way
  clk: bcm2835: De-assert/assert PLL reset signal when appropriate
  clk: imx7d: Move clks_init_on before any clock operations
  clk: imx7d: Correct ahb clk parent select
  clk: imx7d: Correct dram pll type
  clk: imx7d: Add USB clock information
  clk: socfpga: stratix10: add clock driver for Stratix10 platform
  dt-bindings: documentation: add clock bindings information for Stratix10
  clk: ti: fix flag space conflict with clkctrl clocks
  clk: uniphier: add additional ethernet clock lines for Pro4
  clk: uniphier: add SATA clock control support
  clk: uniphier: add PCIe clock control support
  clk: Add driver for the si544 clock generator chip
  clk: davinci: Remove redundant dev_err calls
  clk: uniphier: add ethernet clock control support for PXs3
  ...
2018-04-13 15:51:06 -07:00
Stephen Boyd
b44c4ddf4a Merge branch 'clk-davinci' into clk-next
* clk-davinci:
  clk: davinci: add a reset lookup table for psc0
  reset: modify the way reset lookup works for board files
  reset: add support for non-DT systems
2018-04-06 13:38:08 -07:00
Bartosz Golaszewski
5ced192312 clk: davinci: add a reset lookup table for psc0
In order to be able to use the reset framework in legacy boot mode as
well, add the reset lookup table to the psc driver for da850 variant.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 13:37:19 -07:00
Stephen Boyd
a339bdf64a Merge branches 'clk-stratix10', 'clk-imx', 'clk-bcm', 'clk-cs2000' and 'clk-imx6sll' into clk-next
* clk-stratix10:
  clk: socfpga: stratix10: add clock driver for Stratix10 platform
  dt-bindings: documentation: add clock bindings information for Stratix10

* clk-imx:
  clk: imx7d: Move clks_init_on before any clock operations
  clk: imx7d: Correct ahb clk parent select
  clk: imx7d: Correct dram pll type
  clk: imx7d: Add USB clock information
  clk: imx: pllv2: avoid using uninitialized values
  clk: imx6ull: Add epdc_podf instead of sim_podf
  clk: imx: imx7d: correct video pll clock tree
  clk: imx: imx7d: add the Keypad Port module clock
  clk: imx7d: add CAAM clock
  clk: imx: imx7d: add the snvs clock
  clk: imx: imx6sx: update cko mux options

* clk-bcm:
  clk: bcm2835: De-assert/assert PLL reset signal when appropriate

* clk-cs2000:
  clk: cs2000: set pm_ops in hibernate-compatible way

* clk-imx6sll:
  clk: imx: add clock driver for imx6sll
  dt-bindings: imx: update clock doc for imx6sll
  clk: imx: add new gate/gate2 wrapper funtion
  clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux
2018-04-06 13:22:12 -07:00
Stephen Boyd
a83fdfae5a Merge branches 'clk-davinci', 'clk-si544', 'clk-rockchip', 'clk-uniphier' and 'clk-ti-flag-fix' into clk-next
* clk-davinci:
  clk: davinci: Remove redundant dev_err calls
  clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks
  clk: davinci: New driver for TI DA8XX CFGCHIP clocks
  dt-bindings: clock: Add bindings for DA8XX CFGCHIP clocks
  clk: davinci: Add platform information for TI DM646x PSC
  clk: davinci: Add platform information for TI DM644x PSC
  clk: davinci: Add platform information for TI DM365 PSC
  clk: davinci: Add platform information for TI DM355 PSC
  clk: davinci: Add platform information for TI DA850 PSC
  clk: davinci: Add platform information for TI DA830 PSC
  clk: davinci: New driver for davinci PSC clocks
  dt-bindings: clock: New bindings for TI Davinci PSC
  clk: davinci: Add platform information for TI DM646x PLL
  clk: davinci: Add platform information for TI DM644x PLL
  clk: davinci: Add platform information for TI DM365 PLL
  clk: davinci: Add platform information for TI DM355 PLL
  clk: davinci: Add platform information for TI DA850 PLL
  clk: davinci: Add platform information for TI DA830 PLL
  clk: davinci: New driver for davinci PLL clocks
  dt-bindings: clock: Add new bindings for TI Davinci PLL clocks

* clk-si544:
  clk: Add driver for the si544 clock generator chip

* clk-rockchip:
  clk: rockchip: assign correct id for pclk_ddr and hclk_sd in rk3399
  clk: rockchip: Fix error return in phase clock registration
  clk: rockchip: Correct the behaviour of restoring cached phase
  clk: rockchip: Fix wrong parents for MMC phase clock for rk3328
  clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228
  clk: rockchip: Add 1.6GHz PLL rate for rk3399
  clk: rockchip: Restore the clock phase after the rate was changed
  clk: rockchip: Prevent calculating mmc phase if clock rate is zero
  clk: rockchip: Free the memory on the error path
  clk: rockchip: document hdmi_phy external input for rk3328
  clk: rockchip: add flags for rk3328 dclk_lcdc
  clk: rockchip: remove ignore_unused flag from rk3328 vio_h2p clocks
  clk: rockchip: protect all remaining rk3328 interconnect clocks
  clk: rockchip: export sclk_hdmi_sfc on rk3328
  clk: rockchip: remove HCLK_VIO from rk3328 dt header
  clk: rockchip: fix hclk_vio_niu on rk3328

* clk-uniphier:
  clk: uniphier: add additional ethernet clock lines for Pro4
  clk: uniphier: add SATA clock control support
  clk: uniphier: add PCIe clock control support
  clk: uniphier: add ethernet clock control support for PXs3
  clk: uniphier: add Pro4/Pro5/PXs2 audio system clock

* clk-ti-flag-fix:
  clk: ti: fix flag space conflict with clkctrl clocks
  clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
2018-04-06 13:22:06 -07:00
Stephen Boyd
b03781920c Merge branches 'clk-mediatek', 'clk-hisi', 'clk-allwinner', 'clk-ux500' and 'clk-renesas' into clk-next
* clk-mediatek:
  clk: mediatek: add audsys support for MT2701
  clk: mediatek: add devm_of_platform_populate() for MT7622 audsys
  dt-bindings: clock: mediatek: add audsys support for MT2701
  dt-bindings: clock: mediatek: update audsys documentation to adapt MFD device
  clk: mediatek: update missing clock data for MT7622 audsys
  clk: mediatek: fix PWM clock source by adding a fixed-factor clock
  dt-bindings: clock: mediatek: add binding for fixed-factor clock axisel_d4

* clk-hisi:
  clk: hisilicon: fix potential NULL dereference in hisi_clk_alloc()
  clk: hisilicon: mark wdt_mux_p[] as const
  clk: hisilicon: Mark phase_ops static
  clk: hi3798cv200: add emmc sample and drive clock
  clk: hisilicon: add hisi phase clock support
  clk: hi3798cv200: add COMBPHY0 clock support
  clk: hi3798cv200: fix define indentation
  clk: hi3798cv200: add support for HISTB_USB2_OTG_UTMI_CLK
  clk: hi3798cv200: correct IR clock parent
  clk: hi3798cv200: fix unregister call sequence in error path

* clk-allwinner:
  clk: sunxi-ng: add missing hdmi-slow clock for H6 CCU
  clk: sunxi-ng: add support for the Allwinner H6 CCU
  dt-bindings: add device tree binding for Allwinner H6 main CCU
  clk: sunxi-ng: Support fixed post-dividers on NKMP style clocks
  clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO
  clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate
  clk: sunxi-ng: h3: h5: Add minimal rate for video PLL
  clk: sunxi-ng: Add check for minimal rate to NM PLLs
  clk: sunxi-ng: Use u64 for calculation of nkmp rate
  clk: sunxi-ng: Mask nkmp factors when setting register
  clk: sunxi-ng: remove select on obsolete SUNXI_CCU_X kconfig name

* clk-ux500:
  clk: ux500: Drop AB8540/9540 support

* clk-renesas: (27 commits)
  clk: renesas: cpg-mssr: Adjust r8a77980 ifdef
  clk: renesas: rcar-gen3: Always use readl()/writel()
  clk: renesas: sh73a0: Always use readl()/writel()
  clk: renesas: rza1: Always use readl()/writel()
  clk: renesas: rcar-gen2: Always use readl()/writel()
  clk: renesas: r8a7740: Always use readl()/writel()
  clk: renesas: r8a73a4: Always use readl()/writel()
  clk: renesas: mstp: Always use readl()/writel()
  clk: renesas: div6: Always use readl()/writel()
  clk: fix false-positive Wmaybe-uninitialized warning
  clk: renesas: r8a77965: Replace DU2 clock
  clk: renesas: cpg-mssr: Add support for R-Car M3-N
  clk: renesas: cpg-mssr: add R8A77980 support
  dt-bindings: clock: add R8A77980 CPG core clock definitions
  clk: renesas: r8a7792: Add rwdt clock
  clk: renesas: r8a7794: Add rwdt clock
  clk: renesas: r8a7791/r8a7793: Add rwdt clock
  clk: renesas: r8a7790: Add rwdt clock
  clk: renesas: r8a7745: Add rwdt clock
  clk: renesas: r8a7743: Add rwdt clock
  ...
2018-04-06 13:21:57 -07:00
Stephen Boyd
fbc20b8c3c Merge branches 'clk-mvebu', 'clk-phase', 'clk-nxp', 'clk-mtk2712' and 'clk-qcom-rpmcc' into clk-next
* clk-mvebu:
  clk: mvebu: armada-38x: add support for missing clocks
  clk: mvebu: cp110: Fix clock tree representation

* clk-phase:
  clk: Don't show the incorrect clock phase
  clk: update cached phase to respect the fact when setting phase

* clk-nxp:
  clk: lpc32xx: Set name of regmap_config

* clk-mtk2712:
  clk: mediatek: update clock driver of MT2712
  dt-bindings: clock: add clocks for MT2712

* clk-qcom-rpmcc:
  clk: qcom: rpmcc: Add support to XO buffered clocks
2018-04-06 13:21:52 -07:00
Stephen Boyd
e8121d9867 Merge branches 'clk-spreadtrum', 'clk-stm32f', 'clk-stm32mp1', 'clk-hi655x' and 'clk-gpio' into clk-next
* clk-spreadtrum:
  clk: sprd: add RTC gate for SC9860
  dt-bindings: clocks: add APB RTC gate for SC9860

* clk-stm32f:
  clk: stm32: Add clk entry for SDMMC2 on stm32F769
  clk: stm32: Add DSI clock for STM32F469 Board
  clk: stm32: END_PRIMARY_CLK should be declare after CLK_SYSCLK

* clk-stm32mp1:
  clk: stm32: add configuration flags for each of the stm32 drivers
  clk: stm32mp1: add Debug clocks
  clk: stm32mp1: add MCO clocks
  clk: stm32mp1: add RTC clock
  clk: stm32mp1: add Peripheral & Kernel Clocks
  clk: stm32mp1: add Kernel timers
  clk: stm32mp1: add Sub System clocks
  clk: stm32mp1: add Post-dividers for PLL
  clk: stm32mp1: add PLL clocks
  clk: stm32mp1: add Source Clocks for PLLs
  clk: stm32mp1: add MP1 gate for hse/hsi/csi oscillators
  clk: stm32mp1: Introduce STM32MP1 clock driver
  dt-bindings: Document STM32MP1 Reset Clock Controller (RCC) bindings

* clk-hi655x:
  clk: enable hi655x common clk automatically

* clk-gpio:
  clk: clk-gpio: Allow GPIO to sleep in set/get_parent
2018-04-06 13:21:45 -07:00
Stephen Boyd
caa9f3b7d7 Merge branches 'clk-versatile', 'clk-doc', 'clk-must-check', 'clk-qcom' and 'clk-debugfs' into clk-next
* clk-versatile:
  clk: versatile: Remove WARNs in ->round_rate()
  clk: versatile: add min/max rate boundaries for vexpress osc clock

* clk-doc:
  Documentation: clk: enable lock is not held for clk_is_enabled API

* clk-must-check:
  clk: add more __must_check for bulk APIs

* clk-qcom:
  clk: qcom: smd-rpm: Migrate to devm_of_clk_add_hw_provider()
  clk: qcom: gcc-msm8996: Mark aggre0 noc clks as critical

* clk-debugfs:
  clk: Re-use DEFINE_SHOW_ATTRIBUTE() macro
2018-04-06 13:21:39 -07:00
Stephen Boyd
15afa044cb Merge branches 'clk-ti', 'clk-amlogic', 'clk-tegra' and 'clk-samsung' into clk-next
* clk-ti:
  clk: keystone: sci-clk: add support for dynamically probing clocks
  clk: ti: add support for clock latching to mux clocks
  clk: ti: add support for clock latching to divider clocks
  clk: ti: add generic support for clock latching
  clk: ti: add support for register read-modify-write low-level operation
  dt-bindings: clock: ti: add latching support to mux and divider clocks

* clk-amlogic: (50 commits)
  clk: meson: Drop unused local variable and add static
  clk: meson: clean-up clk81 clocks
  clk: meson: add fdiv clock gates
  clk: meson: add mpll pre-divider
  clk: meson: axg: add hifi pll clock
  clk: meson: axg: add hifi clock bindings
  clk: meson: add ROUND_CLOSEST to the pll driver
  clk: meson: add gp0 frac parameter for axg and gxl
  clk: meson: improve pll driver results with frac
  clk: meson: remove special gp0 lock loop
  clk: meson: poke pll CNTL last
  clk: meson: add fractional part of meson8b fixed_pll
  clk: meson: use hhi syscon if available
  clk: meson: remove obsolete cpu_clk
  clk: meson: rework meson8b cpu clock
  clk: meson: split divider and gate part of mpll
  clk: meson: migrate plls clocks to clk_regmap
  clk: meson: migrate the audio divider clock to clk_regmap
  clk: meson: migrate mplls clocks to clk_regmap
  clk: meson: add regmap helpers for parm
  ...

* clk-tegra:
  clk: tegra: Fix pll_u rate configuration
  clk: tegra: Specify VDE clock rate
  clk: tegra20: Correct PLL_C_OUT1 setup
  clk: tegra: Mark HCLK, SCLK and EMC as critical
  clk: tegra: MBIST work around for Tegra210
  clk: tegra: add fence_delay for clock registers
  clk: tegra: Add la clock for Tegra210

* clk-samsung: (22 commits)
  clk: samsung: Mark a few things static
  clk: samsung: Add fout=196608001 Hz EPLL rate entry for exynos4412
  clk: samsung: exynos5250: Add missing clocks for FIMC LITE SYSMMU devices
  clk: samsung: exynos5420: Add more entries to EPLL rate table
  clk: samsung: exynos5420: Add CLK_SET_RATE_PARENT flag to mout_mau_epll_clk
  clk: samsung: exynos5250: Move PD-dependent clocks to Exynos5 sub-CMU
  clk: samsung: exynos5420: Move PD-dependent clocks to Exynos5 sub-CMU
  clk: samsung: Add Exynos5 sub-CMU clock driver
  soc: samsung: pm_domains: Add blacklisting clock handling
  clk: samsung: Add compile time PLL rate validators
  clk: samsung: s3c2410: Fix PLL rates
  clk: samsung: exynos7: Fix PLL rates
  clk: samsung: exynos5433: Fix PLL rates
  clk: samsung: exynos5260: Fix PLL rates
  clk: samsung: exynos5250: Fix PLL rates
  clk: samsung: exynos3250: Fix PLL rates
  clk: exynos5433: Extend list of available AUD_PLL output frequencies
  clk: exynos5433: Add CLK_IGNORE_UNUSED flag to sclk_ioclk_i2s1_bclk
  clk: samsung: Add a git tree entry to MAINTAINERS
  clk: samsung: Remove redundant dev_err call in exynos_audss_clk_probe()
  ...
2018-04-06 13:21:33 -07:00
Bai Ping
4a5f720b65 clk: imx: add clock driver for imx6sll
Add clk driver support for imx6sll.

Signed-off-by: Bai Ping <ping.bai@nxp.com>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 11:27:27 -07:00
Bai Ping
2b18cc1f12 clk: imx: add new gate/gate2 wrapper funtion
Add new gate/gate2 wrapper function to register clocks with optional flags.

Signed-off-by: Bai Ping <ping.bai@nxp.com>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 11:27:25 -07:00
Bai Ping
6f9575e556 clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux
The busy divider and busy mux is actually used by the system critical clocks,
so add 'CLK_IS_CRITICAL' to clocks registered with these two type.

Signed-off-by: Bai Ping <ping.bai@nxp.com>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 11:27:24 -07:00
Nikita Yushchenko
eade4ccdb0 clk: cs2000: set pm_ops in hibernate-compatible way
Use SET_LATE_SYSTEM_SLEEP_PM_OPS() macro instead of direct assignment to
.resume_early field.

This fixes initialization of CS2000 in restore from hibernation in case
of kernel used to load image did not initialize CS2000 while kernel
being restored had CS2000 initialized.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 11:22:44 -07:00
Boris Brezillon
753872373b clk: bcm2835: De-assert/assert PLL reset signal when appropriate
In order to enable a PLL, not only the PLL has to be powered up and
locked, but you also have to de-assert the reset signal. The last part
was missing. Add it so PLLs that were not enabled by the FW/bootloader
can be enabled from Linux.

Fixes: 41691b8862 ("clk: bcm2835: Add support for programming the audio domain clocks")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 11:15:42 -07:00
Dong Aisheng
8d41e6538c clk: imx7d: Move clks_init_on before any clock operations
For init on clocks we should move it at the first place in imx7d_clocks_init()
before any clock operations, else the clock operation may fail in case the clock
is still not on.

Acked-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@freescale.com>
Signed-off-by: Dong Aisheng <b29396@freescale.com>
Signed-off-by: Irina Tirdea <irina.tirdea@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 10:14:04 -07:00
Anson Huang
a12ec8b653 clk: imx7d: Correct ahb clk parent select
Design team change the ahb's clk parent options but
did NOT update the DOC accordingly in time, so the
AHB/IPG's clk rate in clk tree is incorrect, AHB is
67.5MHz and IPG is 33.75MHz, but using scope to
monitor them, they are actually 135MHz and 67.5MHz,
update the clk parent option to make clk tree info
correct.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Irina Tirdea <irina.tirdea@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 10:14:03 -07:00
Anson Huang
afe7c08a03 clk: imx7d: Correct dram pll type
DRAM PLL is a audio/video type PLL, need to correct
it to get correct ops of PLL.

There is a test_div placed before DRAM PLL's gate, so
add this test div clk.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Irina Tirdea <irina.tirdea@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 10:13:59 -07:00
Peter Chen
5fcb4c76bb clk: imx7d: Add USB clock information
Add USB clock information, the pll_usb_main_clk is USB_PLL at CCM
which is the output of USBOTG2 PHY.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Irina Tirdea <irina.tirdea@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 10:13:55 -07:00
Dinh Nguyen
07afb8db73 clk: socfpga: stratix10: add clock driver for Stratix10 platform
Add a clock driver for the Stratix10 SoC. The driver is similar to the
Cyclone5/Arria10 platforms, with the exception that this driver only uses
one single clock binding.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 10:12:35 -07:00
Linus Torvalds
38c23685b2 ARM: SoC driver updates for 4.17
The main addition this time around is the new ARM "SCMI" framework,
 which is the latest in a series of standards coming from ARM to do power
 management in a platform independent way. This has been through many
 review cycles, and it relies on a rather interesting way of using the
 mailbox subsystem, but in the end I agreed that Sudeep's version was
 the best we could do after all.
 
 Other changes include:
 
 - the ARM CCN driver is moved out of drivers/bus into drivers/perf,
   which makes more sense. Similarly, the performance monitoring
   portion of the CCI driver are moved the same way and cleaned up
   a little more.
 
 - a series of updates to the SCPI framework
 
 - support for the Mediatek mt7623a SoC in drivers/soc
 
 - support for additional NVIDIA Tegra hardware in drivers/soc
 
 - a new reset driver for Socionext Uniphier
 
 - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and
   drivers/firmware and drivers/reset across platforms
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaxiNzAAoJEGCrR//JCVInYhYP/2kPhc5t/kszA1bcklcbO9dY
 eX37Ra/RR4yQ5yeQZVIZ4UkUovxk9PmG2tM4K5oJaTDsz5pPEgavVOOr3sbfj6vb
 4O9auTeysEQlHcbVdNFum0YS2gUY2YD7D12DTRorotLxCqod184ccWXq0XGfIWaY
 l3YRrcL/lPlqmyS3z/GNx9oNygOMUzEfXfIQYICyzHuYiLBUGnkKC1vIb+Hx1TDq
 Cxk++AUqH13Mss24O2A2QQh+oBHj2BybDLLqwcC5PSpsUbFrVCfzG54l43mig32T
 NOxV0Qnml2wAtU4H0QcgtSgwRimHD0YOiX8ssquvDDiqTqM5G+llSTGkEbYe+AUW
 4GIZYoBOwGkfEXS+tyymHe9yfc5h1OLYAeFU1jRm723c7phanuu67rPn35YC8UMK
 zSql10JpkAGNzMikrxxb6wnis951w2UFlzhgZQ6ItA/nRq3l+oEQA0Qiljv965nz
 DVLsD5+gdhK6GBctkzlsD5HFn6GjM8JilnsOVPHD765nKnVBSxKiXRLV228XVug2
 rChF1FhQqLnM54jCMqHZX5fS9SbSgtYswHqIXpVw6GmJkqq/Ly10yGR0vuWD+uyn
 BV7q5AKpGrwm6wZkMM2uZ1VdUtWzn856AbkqrvX/QhmJcX4McuqaLUrC8bSOj1ty
 KeVil0akq3nU+xHl5Ojs
 =Pmsx
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "The main addition this time around is the new ARM "SCMI" framework,
  which is the latest in a series of standards coming from ARM to do
  power management in a platform independent way.

  This has been through many review cycles, and it relies on a rather
  interesting way of using the mailbox subsystem, but in the end I
  agreed that Sudeep's version was the best we could do after all.

  Other changes include:

   - the ARM CCN driver is moved out of drivers/bus into drivers/perf,
     which makes more sense. Similarly, the performance monitoring
     portion of the CCI driver are moved the same way and cleaned up a
     little more.

   - a series of updates to the SCPI framework

   - support for the Mediatek mt7623a SoC in drivers/soc

   - support for additional NVIDIA Tegra hardware in drivers/soc

   - a new reset driver for Socionext Uniphier

   - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and
     drivers/firmware and drivers/reset across platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
  reset: uniphier: add ethernet reset control support for PXs3
  reset: stm32mp1: Enable stm32mp1 reset driver
  dt-bindings: reset: add STM32MP1 resets
  reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control
  reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency
  reset: modify the way reset lookup works for board files
  reset: add support for non-DT systems
  clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove
  firmware: arm_scmi: prevent accessing rate_discrete uninitialized
  hwmon: (scmi) return -EINVAL when sensor information is unavailable
  amlogic: meson-gx-socinfo: Update soc ids
  soc/tegra: pmc: Use the new reset APIs to manage reset controllers
  soc: mediatek: update power domain data of MT2712
  dt-bindings: soc: update MT2712 power dt-bindings
  cpufreq: scmi: add thermal dependency
  soc: mediatek: fix the mistaken pointer accessed when subdomains are added
  soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC
  soc: mediatek: avoid hardcoded value with bus_prot_mask
  dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding
  dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC
  ...
2018-04-05 21:29:35 -07:00
Linus Torvalds
b240b419db ARM: SoC device tree updates for 4.17
This is the usual set of changes for device trees, with over 700
 non-merged changesets. There is an ongoing set of dtc warning fixes and
 the usual bugfixes, cleanups and added device support.
 
 The most interesting bit as usual is support for new machines listed
 below:
 
 - The Allwinner H6 makes its debut with the Pine-H64 board, and we get
   two new machines based on its older siblings: the H5 based OrangePi
   Zero+ and the A64 based Teres-I Laptop from Olimex. On the 32-bit side,
   we add The Olimex som204 based on Allwinner A20, and the Banana Pi M2
   Zero development board (based on H2).
 
 - NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972
   development board and p2888 CPU module.
 
 - The Nuvoton npcm750 is a BMC that was newly added, for now we only
   support running on the evaluation board.
 
 - STmicroelectronics stm32 gains support for the stm32mp157c and two
   evaluation boards.
 
 - The Toradex Colibri board family grows a few members based on the
   i.MX6ULL variant.
 
 - The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6
   family of chips.
 
 - The Phytec phyBOARD Mira is a family of industrial boards based on
   i.MX6. For now, four models get added.
 
 - TI am335x based PDU-001 is an industrial embedded machine used for
   traffic monitoring
 
 - The Aspeed platform now supports running on the BMC on the Qualcomm
   Centriq 2400 server
 
 - Samsung Exynos4 based Galaxy S3 is a family of mobile phones Qualcomm
   msm8974 based Galaxy S5 is a rather different phone made by the same
   company.
 
 - The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file
   for the various boards made by Xilinx themselves, as well as the
   Digilent Zybo Z7.
 
 - The ARM Versatile family now supports the "IB2" interface board.
 
 - The Renesas H2 based "Stout" and the H3 based Salvator-X are more
   evaluation boards named after a kind of beer, as most of them are.
   The r8a77980 (V3H) based "Condor" apparently doesn't follow that
   tradition. ;-)
 
 - ROC-RK3328-CC is a simple developement board from the Libre Computer
   Project, based on the Rockchips RK3328 SoC
 
 - Haiku is another development board plus Qseven module based on Rockchips
   RK3368 and made by Theobroma Systems.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaxjFeAAoJEGCrR//JCVInw2gQALS/sK83IJE0Ngw98Cko8fqn
 NnbaLaZybajRCdZfXFrIgyL1YijsK4eeniA6zXvFixctlx0FcH2Ep1merbFa52Il
 bZKDOeCr6JfSggk2pZvnC7efwAsc5qMmSGU7KgvUV9vgAXTXANdTlVttoBrZldvI
 baR5W34BjcXRvA14FyxUPiQgGiCft3rE2ZJA9CqJQ9W44vxnTpbcYpimwya8LWss
 hhbJ8P73HhVsKlwS4QXajpLJSo52VdhGDZCd/MwH1yWjzgQZ7O2ijSFz3jYmvdZf
 1guE1FhcpHX8/0j1v5OqfEFAjaFUl+Fef11McUlGe4lVM2C47kuNEil//cb4pJ2j
 ipQ0qR26GkoBmoxSlt0cI9yUtSemTWzZZSLeTPNQGytb7hRNdR22xwf2vr9Eh6dB
 PMG2G0VXVp5Xuif+3iDLxFKiPsBsN49RGtqOj6p9eZhbTIRjgQ5671T3Kla0KRLH
 CFlWyYYrRqtUVeM3XSXmNQb9pyuCDqOlLyVngDbCuz4HIly3I2kgSYLTCFZx5FfT
 kkVbNy+cO/TOkX8w1P8XiRDGQ16YHQ5kjvy1mUPiPEnf70L2gD8HXWeVX1J2SXzF
 OoeNJTzON0cpvtUaM/4hsASi5mHz8rv8CTH8HUviRlXvSH/7JqlM2XqhWSVJ+gYZ
 S7/RgDEviOzsHBf/EMUN
 =7rHo
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Arnd Bergmann:
 "This is the usual set of changes for device trees, with over 700
  non-merged changesets. There is an ongoing set of dtc warning fixes
  and the usual bugfixes, cleanups and added device support.

  The most interesting bit as usual is support for new machines listed
  below:

   - The Allwinner H6 makes its debut with the Pine-H64 board, and we
     get two new machines based on its older siblings: the H5 based
     OrangePi Zero+ and the A64 based Teres-I Laptop from Olimex. On the
     32-bit side, we add The Olimex som204 based on Allwinner A20, and
     the Banana Pi M2 Zero development board (based on H2).

   - NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972
     development board and p2888 CPU module.

   - The Nuvoton npcm750 is a BMC that was newly added, for now we only
     support running on the evaluation board.

   - STmicroelectronics stm32 gains support for the stm32mp157c and two
     evaluation boards.

   - The Toradex Colibri board family grows a few members based on the
     i.MX6ULL variant.

   - The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6 family
     of chips.

   - The Phytec phyBOARD Mira is a family of industrial boards based on
     i.MX6. For now, four models get added.

   - TI am335x based PDU-001 is an industrial embedded machine used for
     traffic monitoring

   - The Aspeed platform now supports running on the BMC on the Qualcomm
     Centriq 2400 server

   - Samsung Exynos4 based Galaxy S3 is a family of mobile phones
     Qualcomm msm8974 based Galaxy S5 is a rather different phone made
     by the same company.

   - The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file
     for the various boards made by Xilinx themselves, as well as the
     Digilent Zybo Z7.

   - The ARM Versatile family now supports the "IB2" interface board.

   - The Renesas H2 based "Stout" and the H3 based Salvator-X are more
     evaluation boards named after a kind of beer, as most of them are.
     The r8a77980 (V3H) based "Condor" apparently doesn't follow that
     tradition. ;-)

   - ROC-RK3328-CC is a simple developement board from the Libre
     Computer Project, based on the Rockchips RK3328 SoC

   - Haiku is another development board plus Qseven module based on
     Rockchips RK3368 and made by Theobroma Systems"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (701 commits)
  arm: dts: modify Nuvoton NPCM7xx device tree structure
  arm: dts: modify Makefile NPCM750 configuration name
  arm: dts: modify clock binding in NPCM750 device tree
  arm: dts: modify timer register size in NPCM750 device tree
  arm: dts: modify UART compatible name in NPCM750 device tree
  arm: dts: add watchdog device to NPCM750 device tree
  arm64: dts: uniphier: add ethernet node for PXs3
  ARM: dts: uniphier: add pinctrl groups of ethernet for second instance
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0
  arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier
  arm: dts: armada-385-db-ap: use SPDX-License-Identifier
  arm: dts: armada-388-rd: use SPDX-License-Identifier
  arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier
  arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier
  arm: dts: armada-370-db: use SPDX-License-Identifier
  arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board
  arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs
  arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs
  ...
2018-04-05 21:18:09 -07:00
Tero Kristo
269bd202bc clk: ti: fix flag space conflict with clkctrl clocks
The introduction of support for CLK_SET_RATE_PARENT flag for clkctrl
clocks used a generic clock flag, which causes a conflict with the
rest of the clkctrl flags, namely the NO_IDLEST flag. This can cause
boot failures on certain platforms where this flag is introduced, by
omitting the wait for the clockctrl module to be fully enabled before
proceeding with rest of the code.

Fix this by moving all the clkctrl specific flags to their own bit-range.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Fixes: 49159a9dc3 ("clk: ti: add support for CLK_SET_RATE_PARENT flag")
Reported-by: Christophe Lyon <christophe.lyon@linaro.org>
Tested-by: Tony Lindgren <tony@atomide.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-05 15:25:22 -07:00
Kunihiko Hayashi
6f1aa4ef3f clk: uniphier: add additional ethernet clock lines for Pro4
Pro4 SoC has clock lines for Giga-bit feature and ethernet phy,
and these are mandatory to activate the ethernet controller. This adds
support for the clock lines.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-05 15:03:51 -07:00
Kunihiko Hayashi
54e1f7ee1f clk: uniphier: add SATA clock control support
Add clock control for SATA controller on UniPhier SoCs. This adds
support for PXs2, LD20 and PXs3.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-05 15:03:49 -07:00
Kunihiko Hayashi
2e277efb82 clk: uniphier: add PCIe clock control support
Add clock control for PCIe controller on UniPhier SoCs. This adds
support for Pro5, LD20 and PXs3.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-05 15:03:45 -07:00
Mike Looijmans
953cc3e811 clk: Add driver for the si544 clock generator chip
This patch adds the driver and devicetree documentation for the
Silicon Labs SI544 clock generator chip. This is an I2C controlled
oscillator capable of generating clock signals ranging from 200kHz
to 1500MHz.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
[sboyd: assign max_freq to 0 in is_valid_frequency() to squelch warning]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-23 10:05:25 -07:00
Wei Yongjun
fc3fcb4ff1 clk: davinci: Remove redundant dev_err calls
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-23 09:44:45 -07:00
Stephen Boyd
aa584d28f3 clk: renesas: Updates for v4.17 (take two)
- Fix the incorrect display clock on R-Car M3-N,
   - Always use readl()/writel(),
   - Small fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJas+E+AAoJEEgEtLw/Ve77zsUP/2pX3Yn/ydkiCzaIhyelGukH
 /adQ/Bs4jwpltImSBo70qW8p6k6okFaJjy0lunyKRO1rMxu6X9+HMr4Qh2hP/cqz
 L8QBONxHXOHjiHtpzx7d2SlCGl1TrW5nEAWSJqEuifLIYzxhxxsv1aFkH2wEhLQn
 P8vgFZMSYeWnMCp/fb0cflmeNuNuGRZQaehUU+9gZQEcPo6pSYohT0ooIvy3OcUA
 pGB96FtJtUdq0qrZIdHFMv/h2QnZwLBpfFFT1Nl9ATbP/htqxsgH45PZYLqyVgTr
 F5AtKR/xmMx+P0b+Q8KWAqqfZPtsyPOy/SsBUK49/OeCQsnbZGTWjcRvbSC67y6y
 VYM+2ve0RSF7oA87+EkKszezNY9H+UJz3G3rzrIaIL+fChshLvjXM5O5YT/oyOxP
 4FvxXmcgu1g8qJ3dsXVV6rkR1qsdWKrR4blvqGHB6XHzmeH96mT/znpQUfO6J2rp
 9icKL0O9yFMuUe+Lvt7/t+cB16KNOaNrt3/dqgsRfM9Wuch7a1p2XV3MUrreG8FN
 zd+DJagr4mcHpGS932RMEKqrcpBZUxw+4/VjNxz5GLc90tM11MakaNu9zf0GD3HP
 GlRcBhckwAX3QgzyH3VrX9KautT4/9XXjMHQFWmjnON2UcZL2LKuGbTahBxpfCc1
 PFQ455sXk/jvxFcq2tan
 =QWlH
 -----END PGP SIGNATURE-----

Merge tag 'clk-renesas-for-v4.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

  - Fix the incorrect display clock on R-Car M3-N,
  - Always use readl()/writel(),
  - Small fixes.

* tag 'clk-renesas-for-v4.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: cpg-mssr: Adjust r8a77980 ifdef
  clk: renesas: rcar-gen3: Always use readl()/writel()
  clk: renesas: sh73a0: Always use readl()/writel()
  clk: renesas: rza1: Always use readl()/writel()
  clk: renesas: rcar-gen2: Always use readl()/writel()
  clk: renesas: r8a7740: Always use readl()/writel()
  clk: renesas: r8a73a4: Always use readl()/writel()
  clk: renesas: mstp: Always use readl()/writel()
  clk: renesas: div6: Always use readl()/writel()
  clk: renesas: r8a77965: Replace DU2 clock
2018-03-23 09:40:52 -07:00
Kunihiko Hayashi
c2fd8756c5 clk: uniphier: add ethernet clock control support for PXs3
Add clock control for ethernet controller on PXs3 SoC.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-23 09:39:36 -07:00
Linus Walleij
726fef09b8 clk: ux500: Drop AB8540/9540 support
The AB8540 was an evolved version of the AB8500, but it was never
mass produced or put into products, only reference designs exist.
The upstream support was never completed and it is unlikely that
this will happen so drop the support for now to simplify
maintenance of the AB8500.

Cc: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-23 09:36:11 -07:00
Lin Huang
9dc486fdf6 clk: rockchip: assign correct id for pclk_ddr and hclk_sd in rk3399
Since hclk_sd and pclk_ddr source clock from CPLL or GPLL,
and these two PLL may change their frequency. If we do not
assign right id to pclk_ddr and hclk_sd, they will alway use
default cur register value, and may get the frequency
exceed their signed off frequency. So assign correct Id
for them, then we can assign frequency for them in dts.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-23 09:09:19 +01:00
Shawn Lin
0d92d1802c clk: rockchip: Fix error return in phase clock registration
The newly added clock notifier may return an error code but so far the
error output in the function would only return an error pointer from
registering the clock.

So when the clock notifier fails the clock would be unregistered but the
return would still be the clock pointer which could then not be
dereferenced correctly. So fix the error handling to prevent that.

Fixes: 60cf09e45f ("clk: rockchip: Restore the clock phase after the rate was changed")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-23 09:08:43 +01:00
Shawn Lin
570fda972b clk: rockchip: Correct the behaviour of restoring cached phase
We can't restore every phase, for instance the invalid phase and
the phase for coming rate which is out of the scope of boards'
ability. And this patch also corrects the error path to return
invalid pointer to clk if clk_notifier_register failed introduced
by the same offending commit.

Fixes: 60cf09e45f ("clk: rockchip: Restore the clock phase after the rate was changed")
Reported-by: wlq <wlq@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: wlq <wlq@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-23 09:02:58 +01:00
Shawn Lin
ce84eca927 clk: rockchip: Fix wrong parents for MMC phase clock for rk3328
commit c420c1e4db22 ("clk: rockchip: Prevent calculating mmc phase if
clock rate is zero") catches some gremlins for clk-rk3328.c that the
parents of MMC phase clock should be clk_{sdmmc, sdio, emmc}, but not
sclk_{sdmmc, sdio, emmc}.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-23 08:58:19 +01:00
Shawn Lin
4b0556a441 clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228
commit c420c1e4db22 ("clk: rockchip: Prevent calculating mmc phase
if clock rate is zero") catches one gremlin again for clk-rk3228.c
that the parent of SDMMC phase clock should be sclk_sdmmc0, but not
sclk_sdmmc. However, the naming of the sdmmc clocks varies in the
manual with the card clock having the 0 while the hclk is named
without appended 0. So standardize one one format to prevent
confusion, as there also is only one (non-sdio) mmc controller on
the soc.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-23 08:49:35 +01:00
Magnus Damm
472f5f3918 clk: renesas: cpg-mssr: Adjust r8a77980 ifdef
Adjust the R8A77980-specific #ifdefs to use CLK instead of ARCH
to follow same style as other SoCs.

Fixes: ce15783c51 ("clk: renesas: cpg-mssr: add R8A77980 support")
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-03-21 17:35:02 +01:00
Geert Uytterhoeven
2b935d524d clk: renesas: rcar-gen3: Always use readl()/writel()
The R-Car Gen3 CPG/MSSR driver (again) uses a mix of
clk_readl()/clk_writel() and readl()/writel() to access the clock
registers. Settle on the generic readl()/writel().

Cfr. commit 30ad3cf00e ("clk: renesas: rcar-gen3-cpg: Always use
readl()/writel()").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-21 17:35:00 +01:00
Geert Uytterhoeven
f046d6a6bf clk: renesas: sh73a0: Always use readl()/writel()
On arm32, there is no reason to use the (soon deprecated)
clk_readl()/clk_writel().  Hence use the generic readl()/writel()
instead.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-21 17:34:58 +01:00
Geert Uytterhoeven
fcf371b351 clk: renesas: rza1: Always use readl()/writel()
On arm32, there is no reason to use the (soon deprecated)
clk_readl()/clk_writel().  Hence use the generic readl()/writel()
instead.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-21 17:34:57 +01:00
Geert Uytterhoeven
6c669e504a clk: renesas: rcar-gen2: Always use readl()/writel()
On arm32, there is no reason to use the (soon deprecated)
clk_readl()/clk_writel().  Hence use the generic readl()/writel()
instead.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-21 17:34:54 +01:00
Geert Uytterhoeven
f32b0696ea clk: renesas: r8a7740: Always use readl()/writel()
On arm32, there is no reason to use the (soon deprecated)
clk_readl()/clk_writel().  Hence use the generic readl()/writel()
instead.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-21 17:34:53 +01:00
Geert Uytterhoeven
b86b493eb2 clk: renesas: r8a73a4: Always use readl()/writel()
On arm32, there is no reason to use the (soon deprecated)
clk_readl()/clk_writel().  Hence use the generic readl()/writel()
instead.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-21 17:34:51 +01:00
Geert Uytterhoeven
8027519840 clk: renesas: mstp: Always use readl()/writel()
On arm32, there is no reason to use the (soon deprecated)
clk_readl()/clk_writel().  Hence use the generic readl()/writel()
instead.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-21 17:34:49 +01:00
Geert Uytterhoeven
c733c7d937 clk: renesas: div6: Always use readl()/writel()
On arm32/arm64, there is no reason to use the (soon deprecated)
clk_readl()/clk_writel().  Hence use the generic readl()/writel()
instead.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-21 17:34:29 +01:00
Icenowy Zheng
f422fa558a
clk: sunxi-ng: add missing hdmi-slow clock for H6 CCU
The Allwinner H6 CCU has a "HDMI Slow Clock", which is currently missing
in the ccu-sun50i-h6 driver.

Add this missing clock to the driver.

Fixes: 542353ea ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-21 12:27:13 +01:00
Wei Yongjun
c744b63b6c clk: hisilicon: fix potential NULL dereference in hisi_clk_alloc()
platform_get_resource() may fail and return NULL, so we should
better check it's return value to avoid a NULL pointer dereference
a bit later in the code.

This is detected by Coccinelle semantic patch.

@@
expression pdev, res, n, t, e, e1, e2;
@@

res = platform_get_resource(pdev, t, n);
+ if (!res)
+   return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Fixes: 322269163a ("clk: hisilicon: add hisi_clk_alloc function.")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20 10:23:41 -07:00
David Lechner
58e1e2d2cd clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks
This adds a new driver for the USB PHY clocks in the CFGCHIP2 syscon
register on TI DA8XX-type SoCs.

The USB0 (USB 2.0) PHY clock is an interesting case because it calls
clk_enable() in a reentrant way. The USB 2.0 PSC only has to be enabled
temporarily while we are locking the PLL, which takes place during the
clk_enable() callback.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20 10:16:26 -07:00
David Lechner
1e88a8d64f clk: davinci: New driver for TI DA8XX CFGCHIP clocks
This adds a new driver for the gate and multiplexer clocks in the
CFGCHIPn syscon registers on TI DA8XX-type SoCs.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20 10:16:26 -07:00
David Lechner
aad739f946 clk: davinci: Add platform information for TI DM646x PSC
This adds platform-specific declarations for the PSC clocks on TI
DM646x based systems.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20 10:16:26 -07:00