platform_device_register_full() to instantiate SPI controller in one go
instead of allocating it, creating a software node, and registering the
platform device as separate steps.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240628180852.1738922-5-dmitry.torokhov@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The platform data for the GPIO controllers for the boards using non-DT
setup is the same between PXA25x (gumstix) and PXA27x (Spitz) devices.
Move it into devices.c to consolidate code. It will help with conversion
to software nodes/properties.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240628180852.1738922-3-dmitry.torokhov@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
GPIOs controlling backlight on Spitz and Akita are coming from GPIO
expanders, not the pxa27xx-gpio block, correct it.
Additionally GPIO lookup tables operate with pin numbers rather than
legacy GPIO numbers, fix that as well. Use raw numbers instead of legacy
GPIO names to avoid confusion.
Fixes: ee0c8e494c ("backlight: corgi: Convert to use GPIO descriptors")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240628180852.1738922-2-dmitry.torokhov@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Complete conversion of the WiFi rfkill device to use device properties/
software nodes by utilizing PROPERTY_ENTRY_GPIO() instead of a lookup
table.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Airoha SoC is not covered by any maintainer entry so relevant patches
can be missed. It seems Mediatek SoC maintainers were covering some
parts of Airoha and Airoha itself is subsidiary of Mediatek, so assign
the Airoha maintenance to Matthias and AngeloGioacchino.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240628095044.132276-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove obsolete RTSM DCSCB support which was only ever implemented
on a software model which is neither available to download nor
maintained. It predates the very first bL cluster based platforms.
Other change include addition of the missing MODULE_DESCRIPTION
macro in vexpress config bus driver.
-----BEGIN PGP SIGNATURE-----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=VAfv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jv0e
-----END PGP SIGNATURE-----
Merge tag 'vexpress-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/arm
Arm Vexpress updates for v6.11
Remove obsolete RTSM DCSCB support which was only ever implemented
on a software model which is neither available to download nor
maintained. It predates the very first bL cluster based platforms.
Other change include addition of the missing MODULE_DESCRIPTION
macro in vexpress config bus driver.
* tag 'vexpress-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
bus: vexpress-config: Add missing MODULE_DESCRIPTION() macro
dt-bindings: arm: Remove obsolete RTSM DCSCB binding
arm: vexpress: Remove obsolete RTSM DCSCB support
Link: https://lore.kernel.org/r/20240620093924.375244-4-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/bus/vexpress-config.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240613-md-arm64-drivers-bus-v1-1-e8162434e0ca@quicinc.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
One patch from John David Anglin which reworks the parisc cache flushing
routines with the aim to fix the random segmentation faults on machines with
PA8800 and PA8900 processors. We have faced those segfaults since many years,
but with this patch no single segfault could be triggered any longer. The
patch was tested by 3 people on 5 different machines with various stable
kernels (6.6, 6.8 and 6.9).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZm7t1gAKCRD3ErUQojoP
X5KaAQCNbzn2jRVOJnWS2MaoMXikDOT1Mc45++M/BQVKFCd0EAEAhGvLFlmwJA6X
h03pyiJ08/8dga/qCBgP8sAEucNP8Ag=
=r3iu
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
"On parisc we have suffered since years from random segfaults which
seem to have been triggered due to cache inconsistencies. Those
segfaults happened more often on machines with PA8800 and PA8900 CPUs,
which have much bigger caches than the earlier machines.
Dave Anglin has worked over the last few weeks to fix this bug. His
patch has been successfully tested by various people on various
machines and with various kernels (6.6, 6.8 and 6.9), and the debian
buildd servers haven't shown a single random segfault with this patch.
Since the cache handling has been reworked, the patch is slightly
bigger than I would like in this stage, but the greatly improved
stability IMHO justifies the inclusion now"
* tag 'parisc-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Try to fix random segmentation faults in package builds
-----BEGIN PGP SIGNATURE-----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=ORm4
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two fixes to correctly report i2c functionality, ensuring that
I2C_FUNC_SLAVE is reported when a device operates solely as a slave
interface"
* tag 'i2c-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: Fix the functionality flags of the slave-only interface
i2c: at91: Fix the functionality flags of the slave-only interface
Here are some small USB and Thunderbolt driver fixes for 6.10-rc4.
Included in here are:
- thunderbolt debugfs bugfix
- USB typec bugfixes
- kcov usb bugfix
- xhci bugfixes
- usb-storage bugfix
- dt-bindings bugfix
- cdc-wdm log message spam bugfix
All of these, except for the last cdc-wdm log level change, have been in
linux-next for a while with no reported problems. The cdc-wdm bugfix
has been tested by syzbot and proved to fix the reported cpu lockup
issues when the log is constantly spammed by a broken device.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZm68wA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylZmgCfeRfuQkFXgRs1LYZ8x2g2FfHmxFgAoJe+2RAW
yR6Lp2bPhH+YQS3rhjNL
=hNwg
-----END PGP SIGNATURE-----
Merge tag 'usb-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.10-rc4.
Included in here are:
- thunderbolt debugfs bugfix
- USB typec bugfixes
- kcov usb bugfix
- xhci bugfixes
- usb-storage bugfix
- dt-bindings bugfix
- cdc-wdm log message spam bugfix
All of these, except for the last cdc-wdm log level change, have been
in linux-next for a while with no reported problems. The cdc-wdm
bugfix has been tested by syzbot and proved to fix the reported cpu
lockup issues when the log is constantly spammed by a broken device"
* tag 'usb-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages
xhci: Handle TD clearing for multiple streams case
xhci: Apply broken streams quirk to Etron EJ188 xHCI host
xhci: Apply reset resume quirk to Etron EJ188 xHCI host
xhci: Set correct transferred length for cancelled bulk transfers
usb-storage: alauda: Check whether the media is initialized
usb: typec: ucsi: Ack also failed Get Error commands
kcov, usb: disable interrupts in kcov_remote_start_usb_softirq
dt-bindings: usb: realtek,rts5411: Add missing "additionalProperties" on child nodes
usb: typec: tcpm: Ignore received Hard Reset in TOGGLING state
usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps
USB: xen-hcd: Traverse host/ when CONFIG_USB_XEN_HCD is selected
usb: typec: ucsi: glink: increase max ports for x1e80100
Revert "usb: chipidea: move ci_ulpi_init after the phy initialization"
thunderbolt: debugfs: Fix margin debugfs node creation condition
Here are some small tty and serial driver fixes that resolve som
reported problems. Included in here are:
- n_tty lookahead buffer bugfix
- WARN_ON() removal where it was not needed
- 8250_dw driver bugfixes
- 8250_pxa bugfix
- sc16is7xx Kconfig fixes for reported build issues
All of these have been in linux-next for over a week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZm6+jQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl/xwCgjLYn51rN/qHGGCy7db5/+B+EeiEAoNXP9BGV
6EmNQc5A9V2Ze+I6xSsE
=aEiP
-----END PGP SIGNATURE-----
Merge tag 'tty-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes that resolve som
reported problems. Included in here are:
- n_tty lookahead buffer bugfix
- WARN_ON() removal where it was not needed
- 8250_dw driver bugfixes
- 8250_pxa bugfix
- sc16is7xx Kconfig fixes for reported build issues
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: drop debugging WARN_ON_ONCE() from uart_write()
serial: sc16is7xx: re-add Kconfig SPI or I2C dependency
serial: sc16is7xx: rename Kconfig CONFIG_SERIAL_SC16IS7XX_CORE
serial: port: Don't block system suspend even if bytes are left to xmit
serial: 8250_pxa: Configure tx_loadsz to match FIFO IRQ level
serial: 8250_dw: Revert "Move definitions to the shared header"
serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw
tty: n_tty: Fix buffer offsets when lookahead is used
Here is a single staging driver fix, for the vc04 driver, for 6.10-rc4.
It resolves a reported problem that showed up in the 6.10-rc1 set of
changes.
It's been in linux-next for over a week with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZm6/6g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym++gCgnzk1zAAj6w5zLYVl4ANqfKgQFr8An35ZOsYh
trI5UWbK82fO94uH1jQA
=7bMb
-----END PGP SIGNATURE-----
Merge tag 'staging-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix, for the vc04 driver. It resolves
a reported problem that showed up in the merge window set of changes.
It's been in linux-next for over a week with no reported problems"
* tag 'staging-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_debugfs: Fix NPD in vchiq_dump_state
Here are 3 small changes for 6.10-rc4 that resolve reported problems,
and finally drop an unused api call. These are:
- removal of devm_device_add_groups(), all the callers of this are
finally gone after the 6.10-rc1 merge (changes came in through
different trees), so it's safe to remove.
- much reported sysfs build error fixed up for systems that did not
have sysfs enabled
- driver core sync issue fix for a many reported issue over the years
that no one really paid much attention to, until Dirk finally
tracked down the real issue and made the "obviously correct and
simple" fix for it.
All of these have been in linux-next for over a week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZm7A2w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykqCwCgxcSy9dsZPvXLjIUGWlT7pJk6a4MAoMUlXWF5
vjwwgsA0XOOaWxQc9XhT
=AM42
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and sysfs fixes from Greg KH:
"Here are three small changes for 6.10-rc4 that resolve reported
problems, and finally drop an unused api call. These are:
- removal of devm_device_add_groups(), all the callers of this are
finally gone after the 6.10-rc1 merge (changes came in through
different trees), so it's safe to remove.
- much reported sysfs build error fixed up for systems that did not
have sysfs enabled
- driver core sync issue fix for a many reported issue over the years
that no one really paid much attention to, until Dirk finally
tracked down the real issue and made the "obviously correct and
simple" fix for it.
All of these have been in linux-next for over a week with no reported
problems"
* tag 'driver-core-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: core: synchronize really_probe() and dev_uevent()
sysfs: Unbreak the build around sysfs_bin_attr_simple_read()
driver core: remove devm_device_add_groups()
Here are a number of small char/misc and iio driver fixes for 6.10-rc4.
Included in here are the following:
- iio driver fixes for a bunch of reported problems.
- mei driver fixes for a number of reported issues.
- amiga parport driver build fix.
- .editorconfig fix that was causing lots of unintended whitespace
changes to happen to files when they were being edited. Unless we
want to sweep the whole tree and remove all trailing whitespace at
once, this is needed for the .editorconfig file to be able to be
used at all. This change is required because the original
submitters never touched older files in the tree.
- jfs bugfix for a buffer overflow
The jfs bugfix is in here as I didn't know where else to put it, and
it's been ignored for a while as the filesystem seems to be abandoned
and I'm tired of seeing the same issue reported in multiple places.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZm7C7A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymdEACfcZAcnD6Z7WAcTJ7GfFfNT9ph0+EAnAtQUO8j
CxuaurBncWfcNeHkaYbB
=Px6n
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc and iio driver fixes for
6.10-rc4. Included in here are the following:
- iio driver fixes for a bunch of reported problems.
- mei driver fixes for a number of reported issues.
- amiga parport driver build fix.
- .editorconfig fix that was causing lots of unintended whitespace
changes to happen to files when they were being edited. Unless we
want to sweep the whole tree and remove all trailing whitespace at
once, this is needed for the .editorconfig file to be able to be
used at all. This change is required because the original
submitters never touched older files in the tree.
- jfs bugfix for a buffer overflow
The jfs bugfix is in here as I didn't know where else to put it, and
it's been ignored for a while as the filesystem seems to be abandoned
and I'm tired of seeing the same issue reported in multiple places.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (25 commits)
.editorconfig: remove trim_trailing_whitespace option
jfs: xattr: fix buffer overflow for invalid xattr
misc: microchip: pci1xxxx: Fix a memory leak in the error handling of gp_aux_bus_probe()
misc: microchip: pci1xxxx: fix double free in the error handling of gp_aux_bus_probe()
parport: amiga: Mark driver struct with __refdata to prevent section mismatch
mei: vsc: Fix wrong invocation of ACPI SID method
mei: vsc: Don't stop/restart mei device during system suspend/resume
mei: me: release irq in mei_me_pci_resume error path
mei: demote client disconnect warning on suspend to debug
iio: inkern: fix channel read regression
iio: imu: inv_mpu6050: stabilized timestamping in interrupt
iio: adc: ad7173: Fix sampling frequency setting
iio: adc: ad7173: Clear append status bit
iio: imu: inv_icm42600: delete unneeded update watermark call
iio: imu: inv_icm42600: stabilized timestamp in interrupt
iio: invensense: fix odr switching to same value
iio: adc: ad7173: Remove index from temp channel
iio: adc: ad7173: Add ad7173_device_info names
iio: adc: ad7173: fix buffers enablement for ad7176-2
iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe()
...
- Fix a bug where the SCSI Removable Media Bit (RMB) was incorrectly set
for hot-plug capable (and eSATA) ports. The RMB bit means that the
media is removable (e.g. floppy or CD-ROM), not that the device server
is removable. If the RMB bit is set, SCSI will set the removable media
sysfs attribute.
If the removable media sysfs attribute is set on a device, GNOME/udisks
will automatically mount the device on boot.
We only want to set the SCSI RMB bit (and thus the removable media
sysfs attribute) for devices where the ATA removable media device bit
is set.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZm6u6AAKCRDJZDGjmcZN
cuyRAP42njwfV/t9IK6cAqUG15v4keX2AN9PDHvZNhn0QeJ7cwEA9bXu7OPjGsFk
1J6jWbxmgSNk0RC9HNXQ4wFlFz+JJgk=
=4VB1
-----END PGP SIGNATURE-----
Merge tag 'ata-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
"Fix a bug where the SCSI Removable Media Bit (RMB) was incorrectly set
for hot-plug capable (and eSATA) ports.
The RMB bit means that the media is removable (e.g. floppy or CD-ROM),
not that the device server is removable. If the RMB bit is set, SCSI
will set the removable media sysfs attribute.
If the removable media sysfs attribute is set on a device,
GNOME/udisks will automatically mount the device on boot.
We only want to set the SCSI RMB bit (and thus the removable media
sysfs attribute) for devices where the ATA removable media device bit
is set"
* tag 'ata-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: Set the RMB bit only for removable media devices
-----BEGIN PGP SIGNATURE-----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=cZJt
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v6.10_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix two issues with MI300 address translation logic
* tag 'edac_urgent_for_v6.10_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
RAS/AMD/ATL: Use system settings for MI300 DRAM to normalized address translation
RAS/AMD/ATL: Fix MI300 bank hash
- Update tracepoints events introduced in v6.10-rc1 so that it includes the
numeric identifier of host card in which the event happens.
- replace wiki URL with the current website URL in Kconfig
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZm1CswAKCRCsLtaWM8Lw
ExhaAQCu+YeWgrb6eg1ngZVvFYz03xfrItwQrfVBmifNo3PpxAD/azbA7HbquaC+
cueCZmjqxk9SLu4FnrZpExFtQjfvGA4=
=3X30
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
- Update tracepoints events introduced in v6.10-rc1 so that it includes
the numeric identifier of host card in which the event happens
- replace wiki URL with the current website URL in Kconfig
* tag 'firewire-fixes-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: record card index in bus_reset_handle tracepoints event
firewire: core: record card index in tracepoinrts events derived from bus_reset_arrange_template
firewire: core: record card index in async_phy_inbound tracepoints event
firewire: core: record card index in async_phy_outbound_complete tracepoints event
firewire: core: record card index in async_phy_outbound_initiate tracepoints event
firewire: core: record card index in tracepoinrts events derived from async_inbound_template
firewire: core: record card index in tracepoinrts events derived from async_outbound_initiate_template
firewire: core: record card index in tracepoinrts events derived from async_outbound_complete_template
firewire: fix website URL in Kconfig
Commit 66601a29bb ("leds: class: If no default trigger is given, make
hw_control trigger the default trigger") causes ledtrig-netdev to get
set as default trigger on various network LEDs.
This causes users to hit a pre-existing AB-BA deadlock issue in
ledtrig-netdev between the LED-trigger locks and the rtnl mutex,
resulting in hung tasks in kernels >= 6.9.
Solving the deadlock is non trivial, so for now revert the change to
set the hw_control trigger as default trigger, so that ledtrig-netdev
no longer gets activated automatically for various network LEDs.
The netdev trigger is not needed because the network LEDs are usually under
hw-control and the netdev trigger tries to leave things that way so setting
it as the active trigger for the LED class device is a no-op.
Fixes: 66601a29bb ("leds: class: If no default trigger is given, make hw_control trigger the default trigger")
Reported-by: Genes Lists <lists@sapience.com>
Closes: https://lore.kernel.org/all/9d189ec329cfe68ed68699f314e191a10d4b5eda.camel@sapience.com/
Reported-by: Johannes Wüller <johanneswueller@gmail.com>
Closes: https://lore.kernel.org/lkml/e441605c-eaf2-4c2d-872b-d8e541f4cf60@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
specifically ensuring that I2C_FUNC_SLAVE is reported when a
device operates solely as a slave interface.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZmwimhYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uOLEA/AuwGjBQT+R3rtW4Rm2TEvbORBTJ
7J0946wYpYrMi8zcAP0e/f1Or4ih6BXKUK2zztHa5duPfCyaajBvA+ynbyMKDw==
=sDff
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
Two fixes from Jean aim to correctly report i2c functionality,
specifically ensuring that I2C_FUNC_SLAVE is reported when a
device operates solely as a slave interface.
The currently used normalized address format is not applicable to all
MI300 systems. This leads to incorrect results during address
translation.
Drop the fixed layout and construct the normalized address from system
settings.
Fixes: 87a6123753 ("RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240607-mi300-dram-xl-fix-v1-2-2f11547a178c@amd.com
* Ensure xfs incore superblock's
1. Allocated inode counter
2. Free inode counter
3. Free data block counter
are zero or positive when they are copied over from
xfs_mount->m_[icount,ifree,fdblocks] respectively.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZm20zAAKCRAH7y4RirJu
9KU+AQDbXY06rXotcoDqALGSKoGZddBnfJMhOiFgOzNDJ+Cy7AEAieixGN2COKoV
Xa3TzIO6fb0mbNg7RDySY6XideiJ7Qw=
=xnum
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Chandan Babu:
"Ensure xfs incore superblock's allocated inode counter, free inode
counter, and free data block counter are all zero or positive when
they are copied over from xfs_mount->m_[icount,ifree,fdblocks]
respectively"
* tag 'xfs-6.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: make sure sb_fdblocks is non-negative
-----BEGIN PGP SIGNATURE-----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=6H3L
-----END PGP SIGNATURE-----
Merge tag '6.10-rc3-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Two small smb3 server fixes:
- set xatttr fix
- pathname parsing check fix"
* tag '6.10-rc3-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix missing use of get_write in in smb2_set_ea()
ksmbd: move leading slash check to smb2_get_name()
The bus reset event occurs in the bus managed by one of 1394 OHCI
controller in Linux system, however the existing tracepoints events has
the lack of data about it to distinguish the issued hardware from the
others.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transmission of phy packet is initiated on one of 1394
OHCI controller, however the existing tracepoints events has the lack of
data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transmission of phy packet is initiated on one of 1394
OHCI controller, however the existing tracepoints events has the lack of
data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transmission of phy packet is initiated on one of 1394
OHCI controller, however the existing tracepoints events has the lack of
data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transaction is initiated on one of 1394 OHCI
controller, however the existing tracepoints events has the lack of data
about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transaction is initiated on one of 1394 OHCI controller,
however the existing tracepoints events has the lack of data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transaction is initiated on one of 1394 OHCI controller,
however the existing tracepoints events has the lack of data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The asynchronous transaction is initiated on one of 1394 OHCI controller,
however the existing tracepoints events has the lack of data about it.
This commit adds card_index member into event structure to store the index
of host controller in use, and prints it.
Link: https://lore.kernel.org/r/20240613131440.431766-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
- A couple of fixes for regressions resulting from the uncoupling of
physical vs virtual kernel address spaces: fix the mapping of the
kernel image using large pages; enforce alignment checks on physical
addresses before creating large pages
- Update defconfigs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmZsyVMACgkQjYWKoQLX
FBiMBwf+Ly2mFUG3LQNPauvjhNkhH5NbkNafQTX9yzuDFn2fvQGUH+IruUosa3WI
egYWP3Z6W0nfpBGWcDleuWCcSUmUvmEiFFI4q30Ze0Q7IMm9VE14/PjSeplWwstV
pFwpZIqofvXFMbP7TYw4R6lwTe1MTtXLQSv53SMrIufeq0OnSWpWp/2dL2AC36fe
QuQCqHDuqbEvoV+3s35+xQ6OMoWcWSfG6gHgBPyQ6brkI39PlZwymdSJFanUUsl3
DCextvbUJEPSI2M5Dc0XrpOnahrN75Sh+w6FYMBcUxVMMNHdbvUXKDzQK3aPL4sQ
qNhzZJtlK545PpYEZ4TVDuU7zPQnzw==
=w9Pa
-----END PGP SIGNATURE-----
Merge tag 's390-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- A couple of fixes for regressions resulting from the uncoupling of
physical vs virtual kernel address spaces: fix the mapping of the
kernel image using large pages; enforce alignment checks on physical
addresses before creating large pages
- Update defconfigs
* tag 's390-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Restore mapping of kernel image using large pages
s390/mm: Allow large pages only for aligned physical addresses
s390: Update defconfigs
core:
- Werror Kconfig fix
panel:
- add orientation quirk for Aya Neo KUN
- fix runtime warning on panel/bridge release
nouveau:
- remove unused struct
- fix wq crash on cards with no display
amdgpu:
- fix bo release clear page warning
xe:
- update MAINTAINERS
- Use correct forcewake assertions.
- Assert that VRAM provisioning is only done on DGFX.
- Flush render caches before user-fence signalling on all engines.
- Move the disable_c6 call since it was sometimes never called.
exynos:
- fix regression with fallback mode
- fix EDID related memory leak
- remove redundant code
komeda:
- fix debugfs conditional compilations
- check pointer error value
renesas:
- atomic shutdown fix
mediatek:
- atomic shutdown fix
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmZsvfcACgkQDHTzWXnE
hr5xDQ/+LjrK7jOp+bI4UYmu3MOieUE49iOEpKS8aNpMoKtISMca6ky/VmJPYBzQ
awN1AAEfdWNa2IqFGBZAsSCXaPuIDDqsWa8PdsXpVNKGN6AkA65TDN2a1eWehTQa
T8chEnYkQXLFmJxSpMvkpzmiEBnrwi6tvXZ0aGb0iUyyeYZm+tJj91ZW4GbJ4V8+
/sCuyCi/Nexx9O2uDAQPdqvillWF1nIO/3+2e+YwBVJO4YKMceZunKvNd661JOnq
idUml6bYvCneZh1SvIIl5gj9Qze87iCa4QR1V5jngJaSjdlBeVpm+Z/r/FdAVPd3
3Hbd1wFPlHP9UbGE/Q30RVcYUWyUu4+/w3kw46dpNbfd2UQkPy6M9UJTFwWzMrXP
FmFAA1XahPHtCqBnCOxCZI2FZGoB2Jq7tI/NRspnBQ+gcy0LiU2pNfSkevKDN/Eu
7LZeq/H2NGPuBTxe0TigsrU0ZEsqWy84tj1eTPDzWVuM8p/fogBP27vDQecLNpDG
xQw7hmwtKfI3Hd4v27NC+788SZ3PgGKR7L7QSsu30KCK5bb7cybN6TCZWPl5mXo7
3p60G5FuQX4c131iuSeoAu1Kxu5g9KFbQW1z1hR37kwfPq1bm6mzTFDZys8SSx7d
qCc3QvJHWUvCug8Mu4RU0h/ZCAMIj62rgMp5XtLqOT9i6R/4x90=
=ZzdU
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-06-15' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes. Seems a little quieter than usual, but still a bunch of
stuff across the board. Mostly xe, some exynos and nouveau fixes.
core:
- Werror Kconfig fix
panel:
- add orientation quirk for Aya Neo KUN
- fix runtime warning on panel/bridge release
nouveau:
- remove unused struct
- fix wq crash on cards with no display
amdgpu:
- fix bo release clear page warning
xe:
- update MAINTAINERS
- Use correct forcewake assertions
- Assert that VRAM provisioning is only done on DGFX
- Flush render caches before user-fence signalling on all engines
- Move the disable_c6 call since it was sometimes never called
exynos:
- fix regression with fallback mode
- fix EDID related memory leak
- remove redundant code
komeda:
- fix debugfs conditional compilations
- check pointer error value
renesas:
- atomic shutdown fix
mediatek:
- atomic shutdown fix"
* tag 'drm-fixes-2024-06-15' of https://gitlab.freedesktop.org/drm/kernel:
arm/komeda: Remove all CONFIG_DEBUG_FS conditional compilations
drm/xe: move disable_c6 call
drm/xe: flush engine buffers before signalling user fence on all engines
drm/xe/pf: Assert LMEM provisioning is done only on DGFX
drm/xe/xe_gt_idle: use GT forcewake domain assertion
drm/mediatek: Call drm_atomic_helper_shutdown() at shutdown time
drm: renesas: shmobile: Call drm_atomic_helper_shutdown() at shutdown time
drm/nouveau: remove unused struct 'init_exec'
drm/nouveau: don't attempt to schedule hpd_work on headless cards
drm/amdgpu: Fix the BO release clear memory warning
drm/bridge/panel: Fix runtime warning on panel bridge release
drm/komeda: check for error-valued pointer
drm: panel-orientation-quirks: Add quirk for Aya Neo KUN
drm/exynos/vidi: fix memory leak in .get_modes()
drm/exynos: dp: drop driver owner initialization
drm/exynos: hdmi: report safe 640x480 mode as a fallback when no EDID found
drm: have config DRM_WERROR depend on !WERROR
MAINTAINERS: Update Xe driver maintainers
MAINTAINERS: update Xe driver maintainers
- Fix long standing lockdep issue of using remap_pfn_range() from
the vfio-pci fault handler for mapping device MMIO. Commit
ba168b52bf ("mm: use rwsem assertion macros for mmap_lock") now
exposes this as a warning forcing this to be addressed.
remap_pfn_range() was used here to efficiently map the entire vma,
but it really never should have been used in the fault handler and
doesn't handle concurrency, which introduced complex locking. We
also needed to track vmas mapping the device memory in order to zap
those vmas when the memory is disabled resulting in a vma list.
Instead of all that mess, setup an address space on the device fd
such that we can use unmap_mapping_range() for zapping to avoid
the tracking overhead and use the standard vmf_insert_pfn() to
insert mappings on fault. For now we'll iterate the vma and
opportunistically try to insert mappings for the entire vma. This
aligns with typical use cases, but hopefully in the future we can
drop the iterative approach and make use of huge_fault instead,
once vmf_insert_pfn{pud,pmd}() learn to handle pfnmaps.
(Alex Williamson)
-----BEGIN PGP SIGNATURE-----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=bSXX
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.10-rc4' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
"Fix long standing lockdep issue of using remap_pfn_range() from the
vfio-pci fault handler for mapping device MMIO. Commit ba168b52bf
("mm: use rwsem assertion macros for mmap_lock") now exposes this as a
warning forcing this to be addressed.
remap_pfn_range() was used here to efficiently map the entire vma, but
it really never should have been used in the fault handler and doesn't
handle concurrency, which introduced complex locking. We also needed
to track vmas mapping the device memory in order to zap those vmas
when the memory is disabled resulting in a vma list.
Instead of all that mess, setup an address space on the device fd
such that we can use unmap_mapping_range() for zapping to avoid the
tracking overhead and use the standard vmf_insert_pfn() to insert
mappings on fault.
For now we'll iterate the vma and opportunistically try to insert
mappings for the entire vma. This aligns with typical use cases, but
hopefully in the future we can drop the iterative approach and make
use of huge_fault instead, once vmf_insert_pfn{pud,pmd}() learn to
handle pfnmaps"
* tag 'vfio-v6.10-rc4' of https://github.com/awilliam/linux-vfio:
vfio/pci: Insert full vma on mmap'd MMIO fault
vfio/pci: Use unmap_mapping_range()
vfio: Create vfio_fs_type with inode per device
drm-misc-fixes for v6.10-rc4:
- Kconfig fix for WERROR.
- Add panel quirk for Aya Neo KUN
- Small bugfixes in komeda, bridge/panel, amdgpu, nouveau.
- Remove unused nouveau struct.
- Call drm_atomic_helper_shutdown for shmobile and mediatek on shutdown.
- Remove DEBUGFS ifdefs from komeda.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/941c0552-3614-4af1-b04a-0a62c99fd7fb@linux.intel.com
-----BEGIN PGP SIGNATURE-----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=p7jM
-----END PGP SIGNATURE-----
Merge tag 'block-6.10-20240614' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Discard double free on error conditions (Chunguang)
- Target Fixes (Daniel)
- Namespace detachment regression fix (Keith)
- Fix for an issue with flush requests and queuelist reuse (Chengming)
- nbd sparse annotation fixes (Christoph)
- unmap and free bio mapped data via submitter (Anuj)
- loop discard/fallocate unsupported fix (Cyril)
- Fix for the zoned write plugging added in this release (Damien)
- sed-opal wrong address fix (Su)
* tag 'block-6.10-20240614' of git://git.kernel.dk/linux:
loop: Disable fallocate() zero and discard if not supported
nvme: fix namespace removal list
nbd: Remove __force casts
nvmet: always initialize cqe.result
nvmet-passthru: propagate status from id override functions
nvme: avoid double free special payload
block: unmap and free user mapped integrity via submitter
block: fix request.queuelist usage in flush
block: Optimize disk zone resource cleanup
block: sed-opal: avoid possible wrong address reference in read_sed_opal_key()
-----BEGIN PGP SIGNATURE-----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=bA5c
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.10-20240614' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Two fixes from Pavel headed to stable:
- Ensure that the task state is correct before attempting to grab a
mutex
- Split cancel sequence flag into a separate variable, as it can get
set by someone not owning the request (but holding the ctx lock)"
* tag 'io_uring-6.10-20240614' of git://git.kernel.dk/linux:
io_uring: fix cancellation overwriting req->flags
io_uring/rsrc: don't lock while !TASK_RUNNING
Three obvious driver fixes. The two core fixes are to disable Command
Duration Limits by default to fix an inconsistency in SATA and some
USB devices. The other is to change the default read size for block
zero to follow the device preference (some USB bridges preferring 16
byte commands don't have a translation for READ(10) and thus don't
scan properly).
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenParntership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZmw2AiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishUaKAQCeqrej
+QoCHTaK7IJ8a5o8RmipBzU20GYG3+qew2Yu+QD+OvhSeGFLupgKuRYKemi+MI4r
/19hMZ0N774tCWr/BDw=
=0Al8
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three obvious driver fixes and two core fixes.
The two core fixes are to disable Command Duration Limits by default
to fix an inconsistency in SATA and some USB devices. The other is to
change the default read size for block zero to follow the device
preference (some USB bridges preferring 16 byte commands don't have a
translation for READ(10) and thus don't scan properly)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpi3mr: Fix ATA NCQ priority support
scsi: ufs: core: Quiesce request queues before checking pending cmds
scsi: core: Disable CDL by default
scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory
scsi: sd: Use READ(16) when reading block zero on large capacity disks
Restore the behavior of the no_turbo sysfs attribute in the
intel_pstate driver which allowed users to make the driver start
using turbo P-states if they have been enabled on the fly by the
firmware after OS initialization (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=LBok
-----END PGP SIGNATURE-----
Merge tag 'pm-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Restore the behavior of the no_turbo sysfs attribute in the
intel_pstate driver which allowed users to make the driver start using
turbo P-states if they have been enabled on the fly by the firmware
after OS initialization (Rafael Wysocki)"
* tag 'pm-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Check turbo_is_disabled() in store_no_turbo()
- Make the ACPI EC driver directly evaluate an "orphan" _REG method
under the EC device, if present, which stopped being evaluated after
the driver had started to install its EC address space handler at the
root of the ACPI namespace (Rafael Wysocki).
- Make more devices put NVMe storage devices into D3 at suspend to work
around missing StorageD3Enable _DSD in the BIOS (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----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=eE4K
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI EC driver and make system
suspend work on multiple platforms where StorageD3Enable _DSD is
missing in the ACPI tables.
Specifics:
- Make the ACPI EC driver directly evaluate an "orphan" _REG method
under the EC device, if present, which stopped being evaluated
after the driver had started to install its EC address space
handler at the root of the ACPI namespace (Rafael Wysocki)
- Make more devices put NVMe storage devices into D3 at suspend to
work around missing StorageD3Enable _DSD in the BIOS (Mario
Limonciello)"
* tag 'acpi-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Evaluate orphan _REG under EC device
ACPI: x86: Force StorageD3Enable on more products
- Prevent the thermal core from failing the registration of a cooling
device if its .get_cur_state() reports an incorrect state to start
with which may happen for fans handled through firmware-supplied AML
in ACPI tables (Rafael Wysocki).
- Make the ACPI thermal zone driver initialize all trip points with
temperature of 0 centigrade and below as invalid because such trip
point temperatures do not make sense on systems with ACPI thermal
control and they cause performance regressions due to permanent
thermal mitigations to occur (Rafael Wysocki).
- Restore passive polling management in the Step-Wise thermal governor
that uses it to ensure that all cooling devices used for thermal
mitigation will go back to their initial states eventually (Rafael
Wysocki).
-----BEGIN PGP SIGNATURE-----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=bfRy
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix three issues introduced recently, two related to defects in
ACPI tables supplied by the platform firmware and one cause by a
thermal core change that went too far:
- Prevent the thermal core from failing the registration of a cooling
device if its .get_cur_state() reports an incorrect state to start
with which may happen for fans handled through firmware-supplied
AML in ACPI tables (Rafael Wysocki)
- Make the ACPI thermal zone driver initialize all trip points with
temperature of 0 centigrade and below as invalid because such trip
point temperatures do not make sense on systems with ACPI thermal
control and they cause performance regressions due to permanent
thermal mitigations to occur (Rafael Wysocki)
- Restore passive polling management in the Step-Wise thermal
governor that uses it to ensure that all cooling devices used for
thermal mitigation will go back to their initial states eventually
(Rafael Wysocki)"
* tag 'thermal-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_step_wise: Restore passive polling management
thermal: ACPI: Invalidate trip points with temperature of 0 or below
thermal: core: Do not fail cdev registration because of invalid initial state
Merge a fix for a suspend issue related to storage handling on multiple
systems based on AMD hardware:
- Make more devices put NVMe storage devices into D3 at suspend to work
around missing StorageD3Enable _DSD in the BIOS (Mario Limonciello).
* branch acpi-x86:
ACPI: x86: Force StorageD3Enable on more products
If fallcate is implemented but zero and discard operations are not
supported by the filesystem the backing file is on we continue to fill
dmesg with errors from the blk_mq_end_request() since each time we call
fallocate() on the loop device the EOPNOTSUPP error from lo_fallocate()
ends up propagated into the block layer. In the end syscall succeeds
since the blkdev_issue_zeroout() falls back to writing zeroes which
makes the errors even more misleading and confusing.
How to reproduce:
1. make sure /tmp is mounted as tmpfs
2. dd if=/dev/zero of=/tmp/disk.img bs=1M count=100
3. losetup /dev/loop0 /tmp/disk.img
4. mkfs.ext2 /dev/loop0
5. dmesg |tail
[710690.898214] operation not supported error, dev loop0, sector 204672 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.898279] operation not supported error, dev loop0, sector 522 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.898603] operation not supported error, dev loop0, sector 16906 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.898917] operation not supported error, dev loop0, sector 32774 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.899218] operation not supported error, dev loop0, sector 49674 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.899484] operation not supported error, dev loop0, sector 65542 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.899743] operation not supported error, dev loop0, sector 82442 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.900015] operation not supported error, dev loop0, sector 98310 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.900276] operation not supported error, dev loop0, sector 115210 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
[710690.900546] operation not supported error, dev loop0, sector 131078 op 0x9:(WRITE_ZEROES) flags 0x8000800 phys_seg 0 prio class 0
This patch changes the lo_fallocate() to clear the flags for zero and
discard operations if we get EOPNOTSUPP from the backing file fallocate
callback, that way we at least stop spewing errors after the first
unsuccessful try.
CC: Jan Kara <jack@suse.cz>
Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240613163817.22640-1-chrubis@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The SCSI Removable Media Bit (RMB) should only be set for removable media,
where the device stays and the media changes, e.g. CD-ROM or floppy.
The ATA removable media device bit is obsoleted since ATA-8 ACS (2006),
but before that it was used to indicate that the device can have its media
removed (while the device stays).
Commit 8a3e33cf92 ("ata: ahci: find eSATA ports and flag them as
removable") introduced a change to set the RMB bit if the port has either
the eSATA bit or the hot-plug capable bit set. The reasoning was that the
author wanted his eSATA ports to get treated like a USB stick.
This is however wrong. See "20-082r23SPC-6: Removable Medium Bit
Expectations" which has since been integrated to SPC, which states that:
"""
Reports have been received that some USB Memory Stick device servers set
the removable medium (RMB) bit to one. The rub comes when the medium is
actually removed, because... The device server is removed concurrently
with the medium removal. If there is no device server, then there is no
device server that is waiting to have removable medium inserted.
Sufficient numbers of SCSI analysts see such a device:
- not as a device that supports removable medium;
but
- as a removable, hot pluggable device.
"""
The definition of the RMB bit in the SPC specification has since been
clarified to match this.
Thus, a USB stick should not have the RMB bit set (and neither shall an
eSATA nor a hot-plug capable port).
Commit dc8b4afc4a ("ata: ahci: don't mark HotPlugCapable Ports as
external/removable") then changed so that the RMB bit is only set for the
eSATA bit (and not for the hot-plug capable bit), because of a lot of bug
reports of SATA devices were being automounted by udisks. However,
treating eSATA and hot-plug capable ports differently is not correct.
From the AHCI 1.3.1 spec:
Hot Plug Capable Port (HPCP): When set to '1', indicates that this port's
signal and power connectors are externally accessible via a joint signal
and power connector for blindmate device hot plug.
So a hot-plug capable port is an external port, just like commit
45b96d65ec ("ata: ahci: a hotplug capable port is an external port")
claims.
In order to not violate the SPC specification, modify the SCSI INQUIRY
data to only set the RMB bit if the ATA device can have its media removed.
This fixes a reported problem where GNOME/udisks was automounting devices
connected to hot-plug capable ports.
Fixes: 45b96d65ec ("ata: ahci: a hotplug capable port is an external port")
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Thomas Weißschuh <linux@weissschuh.net>
Reported-by: Thomas Weißschuh <linux@weissschuh.net>
Closes: https://lore.kernel.org/linux-ide/c0de8262-dc4b-4c22-9fac-33432e5bddd3@t-8ch.de/
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
[cassel: wrote commit message]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
