Clear any interrupt that still is on the device on every channel
this driver is activated for in probe and specific channels in
the timeout handler.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use wait_for_completion_timeout instead of
wait_for_completion_interuptible_timeout.
The interruptible variant gets constantly interrupted if a user
program is compiled with the -pg option.
The killable variant was not used due to the fact that a second
program, reading on this device, that gets killed is then also killing
that wait.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit will enable the interrupts of all channels handled by this
driver only once in the probe function.
This will improve performance because one byte less has to be written over
i2c on each read out of the adc. On the fastest ADC mode this will improve
read out speed by 15%.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In some cases, the wait_completion got interrupted. This caused the
error-handling to mutex_unlock the function. The before turned on
interrupt then got called anyway. In the ISR then completion() was
called causing wrong adc-values returned in a following adc-readout.
Reinitialise completion struct to make sure the counter is zero
when beginning a new adc-conversion.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the compatible name to the driver so it gets loaded when the proper
node in DT is detected.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unnecessary assignment. This could potentially cause an issue, if
the wait function runs into a timeout. Furthermore is this assignment also
not there in stmpe_read_temp()
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When building with -Wsometimes-uninitialized, Clang warns:
drivers/iio/adc/stmpe-adc.c:204:13: warning: variable 'data' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
Clang can't tell that data will never be used uninitialized because the
two if statements take care of all cases. Remove the first if statement
and make it the else branch of the second one so that it is apparent to
Clang that all cases are covered.
Link: https://github.com/ClangBuiltLinux/linux/issues/387
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: NIck Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This adds an ADC driver for the STMPE device using the industrial
input/output interface. The driver supports raw reading of values.
The driver depends on the MFD STMPE driver. If the touchscreen
block is enabled too, only four of the 8 ADC channels are available.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
